Author Topic: Shadovved's Group Buy Directory (Read 645174 times)

janvkn · « **Reply #1350 on:** Wed, 18 May 2016, 13:17:44 »

Received my Cyrillic red and orange caps today. They look great !

Just want to say that I found this a very smooth group buy overall. Nice doing business with you Shadovved

xqwtz · « **Reply #1351 on:** Wed, 18 May 2016, 17:52:30 »

Is the spacebar fitting loosely for anyone else? The outer stabilizers keep popping out on my pok3r.

Not a huge problem though. Doesn't happen when I hit the spacebar in the center, only at the edges sometimes.

y2bd · « **Reply #1352 on:** Wed, 18 May 2016, 17:54:06 »

Quote from: xqwtz on Wed, 18 May 2016, 17:52:30

Is the spacebar fitting loosely for anyone else? The outer stabilizers keep popping out on my pok3r.

Try putting a very thin piece of plastic between the stabilizers and the spacebar (plastic wrap, scotch tape, etc).

alexjd99 · « **Reply #1353 on:** Wed, 18 May 2016, 18:22:46 »

Quote from: xqwtz on Wed, 18 May 2016, 17:52:30

Is the spacebar fitting loosely for anyone else? The outer stabilizers keep popping out on my pok3r.

Not a huge problem though. Doesn't happen when I hit the spacebar in the center, only at the edges sometimes.

I had that problem, but it's nothing bad. Just put some tape over the stem on the cap and pop it on.

SaiZn · « **Reply #1354 on:** Wed, 18 May 2016, 18:46:03 »

Received my CMY blanks

eksuen · « **Reply #1355 on:** Wed, 18 May 2016, 19:18:12 »

Received my caps in California today. The box was a little compressed from transit, but the caps were fine. No issues at all (missing keys, misprints, damaged keys, etc.). 4/4 sets intact. 10/10 would buy again.

mason · « **Reply #1356 on:** Wed, 18 May 2016, 19:19:16 »

Keycaps arrived today -- my brother's birthday

thanks Shadovved. Will post pics tomorrow.

tuco · « **Reply #1357 on:** Wed, 18 May 2016, 19:23:04 »

I'll be able to pick mine up from the post office tomorrow, can't wait! Thanks Shadovved!

mrpotatohead546 · « **Reply #1358 on:** Wed, 18 May 2016, 19:38:23 »

Got mine a few days ago, brought my work keyboard home to put them on today. They're great! With one small problem: The left Shift key is sticking. I tried swapping the Enter and left Shift keys, and the left Shift is the problem, not the switch or stabilizer. I suspect the tolerance is just slightly off.

Should I use the missing form to get another left Shift? Anyone have any experience with this? I have Cherry stabilizers (KUL ES-87).

Awesome keycaps, 5 stars!

EDIT: I also tested the green left Shift from the RGB mod pack, and it works great. So it's just the white one that's sticking.

Photoelectric · « **Reply #1359 on:** Wed, 18 May 2016, 22:21:20 »

Quick photo of the orange Cyrillic set (my favorite of the Cyrillic colors--wishing the Cyan was actually more cyan):

Willyc277 · « **Reply #1360 on:** Wed, 18 May 2016, 22:50:13 »

Shadovved GB king 2K16

dannrawr · « **Reply #1361 on:** Thu, 19 May 2016, 01:09:51 »

Quote from: PK on Wed, 18 May 2016, 11:39:30

Quote from: dannrawr on Wed, 18 May 2016, 11:02:27
how does the printed mods feels?

The legends are noticeably engraved but I don't mind it personally, they feel great in all other aspects. They look just like the pics.

alright thanks bro, ordered the RU cyan

romevi · « **Reply #1362 on:** Thu, 19 May 2016, 01:15:02 »

Quote from: dannrawr on Thu, 19 May 2016, 01:09:51

Quote from: PK on Wed, 18 May 2016, 11:39:30
Quote from: dannrawr on Wed, 18 May 2016, 11:02:27
how does the printed mods feels?

The legends are noticeably engraved but I don't mind it personally, they feel great in all other aspects. They look just like the pics.
alright thanks bro, ordered the RU cyan

Yeah, good pick! You won't regret it.

dannrawr · « **Reply #1363 on:** Thu, 19 May 2016, 01:44:54 »

Quote from: romevi on Thu, 19 May 2016, 01:15:02

Quote from: dannrawr on Thu, 19 May 2016, 01:09:51
Quote from: PK on Wed, 18 May 2016, 11:39:30
Quote from: dannrawr on Wed, 18 May 2016, 11:02:27
how does the printed mods feels?

The legends are noticeably engraved but I don't mind it personally, they feel great in all other aspects. They look just like the pics.
alright thanks bro, ordered the RU cyan

Yeah, good pick! You won't regret it.

got poisoned with yours and bee pics

Shadovved · « **Reply #1364 on:** Thu, 19 May 2016, 05:01:32 »

Makes me so happy you guys love the stuuuuuuff.

10/10 effort for GBs

tmk1207 · « **Reply #1365 on:** Thu, 19 May 2016, 05:10:11 »

Waiting my tracking number

Shadovved · « **Reply #1366 on:** Thu, 19 May 2016, 05:19:38 »

Quote from: tmk1207 on Thu, 19 May 2016, 05:10:11

Waiting my tracking number

You ordered problematic stuff. Gotta wait till they come.

TalkingTree · « **Reply #1367 on:** Thu, 19 May 2016, 05:22:01 »

When will single keys be shipped? Just curious.

Shadovved · « **Reply #1368 on:** Thu, 19 May 2016, 05:32:31 »

Quote from: TalkingTree on Thu, 19 May 2016, 05:22:01

When will single keys be shipped? Just curious.

When they come in. For those that ordered early, should be early-June latest.

Those that couldnt make the cut off for me to order extras from EnjoyPBT, around 1-2 months...

Krytone · « **Reply #1369 on:** Thu, 19 May 2016, 08:00:27 »

got mine a couple days ago. If there was a green RU cryllic, rgb would have been complete

Thanks shaddoved for a great GB.

WNovizar · « **Reply #1370 on:** Thu, 19 May 2016, 08:14:30 »

Just got the rest of my order today. Waiting for my additional orders to arrive. Thanks shadovved.

Waateva · « **Reply #1371 on:** Thu, 19 May 2016, 08:18:15 »

Quote from: Krytone on Thu, 19 May 2016, 08:00:27

got mine a couple days ago. If there was a green RU cryllic, rgb would have been complete

Thanks shaddoved for a great GB.

Show Image

I like the RB idea there :)

jaffers · « **Reply #1372 on:** Thu, 19 May 2016, 08:36:06 »

CP SQ1800 with EnjoyPBT

CP SQ1800 with EnjoyPBT

Perfect

Gajible · « **Reply #1373 on:** Thu, 19 May 2016, 10:05:00 »

All these beautiful pictures... I can't wait!

ambalek · « **Reply #1374 on:** Thu, 19 May 2016, 10:55:58 »

I just received my mods and purple legends set. I'm in the UK (if that helps anyone figure out likely shipping times).

Here it is on my B.face X2 (with a Pexon cable). I clipped my stabilisers and switched the stabilised switches (previously MX Brown) to Zealio 65g while I was at it.

geniekid · « **Reply #1375 on:** Thu, 19 May 2016, 12:59:53 »

The etch+infilled CMYRGB look good, but I have to admit they make me hope there will be dyesubbed CMYRGBs with black legends later on!

Sempre · « **Reply #1376 on:** Thu, 19 May 2016, 14:51:18 »

Quote from: geniekid on Thu, 19 May 2016, 12:59:53

The etch+infilled CMYRGB look good, but I have to admit they make me hope there will be dyesubbed CMYRGBs with black legends later on!

+1

trenzafeeds · « **Reply #1377 on:** Thu, 19 May 2016, 15:26:13 »

finally received mine after some **** with the local post office.

ATXTider · « **Reply #1378 on:** Thu, 19 May 2016, 15:50:28 »

Quote from: Sempre on Thu, 19 May 2016, 14:51:18

Quote from: geniekid on Thu, 19 May 2016, 12:59:53
The etch+infilled CMYRGB look good, but I have to admit they make me hope there will be dyesubbed CMYRGBs with black legends later on!

+1

+1

CommonCurt · « **Reply #1379 on:** Thu, 19 May 2016, 15:55:53 »

I hope mine arrive by the weekend. Kinda sucks not being able to track once it gets to the US.

Photoelectric · « **Reply #1380 on:** Thu, 19 May 2016, 18:10:46 »

Orange EN/RU on keyboard

honeynugget · « **Reply #1381 on:** Thu, 19 May 2016, 18:13:32 »

Just got my 4 sets. Thanks Shadovved!

tuco · « **Reply #1382 on:** Thu, 19 May 2016, 18:29:52 »

Here's mine:

SpAmRaY · « **Reply #1383 on:** Thu, 19 May 2016, 18:58:05 »

gain · « **Reply #1384 on:** Fri, 20 May 2016, 08:34:50 »

sets came in today
eeeeeeeeeeeeeeeee
they look great (ghost white looks waaaaay better than I thought it would too)

tempted to grab more sets but the last thing I need is more keycaps right now

thanks shadovved

KarstRypke · « **Reply #1385 on:** Fri, 20 May 2016, 14:06:07 »

My first PBT set! Installed the caps on my Filco Ninja, they look and feel incredible. Thanks Shadovved!

Not as fancy as some of the other boards I've seen so far, but here's a quick pic.

johntron25 · « **Reply #1386 on:** Fri, 20 May 2016, 19:39:48 »

Hello,
I paid the paypal invoice last Wednesday 5/18. When will my order be shipped? will i be getting a tracking number? Thanks in advance.

Potatoes · « **Reply #1387 on:** Fri, 20 May 2016, 19:45:44 »

Potato phone; basic bitch.

Thought the win95 keys were backordered, but I guess I got mine in on time (was an extra purchaser). That was a nice surprise. Also, it took 7 days from my email to get to Vegas. Super fast shipping...

Didn't know the stepped caps lock has a different stem alignment from the non-stepped, though. Never actually had one before. Not a biggy as I was on the fence on using it to begin with. Everything seems there and in expected shape. Great job, Shadovved!

y2bd · « **Reply #1388 on:** Fri, 20 May 2016, 19:53:07 »

Got my caps today even though they shipped last Friday, crazy fast! Got BWB, Ghost White, and CMYK mods. Very pretty sets!

Will post pics later. Until then, has anyone had issues with the heights of the caps? They don't seem to agree with my ErgoClears board, the bottoming out feels mushy like there are o-rings, and it's an inconsistent feel that seems to vary from key to key. They work fine on my Gateron Yellow board though (and other PBT caps work fine on the EC board) so I have no qualms.

Edit: thought about it, realized it's probably an issue with the in-switch LEDs grinding up against the caps.

ATXTider · « **Reply #1389 on:** Fri, 20 May 2016, 22:59:33 »

Got my caps today, and I'm typing on them right now! They look and feel great! Thanks Shadovved for another flawless GB!

Fiery · « **Reply #1390 on:** Sat, 21 May 2016, 05:41:38 »

I have a quick question. Did anyone else get warped space bars? the one that fits on my Pok3r ends up sometimes not allowing the switch to pop back up. and looks curved. All the other caps are perfect though and I ended up ordering another set...

jebbra · « **Reply #1391 on:** Sat, 21 May 2016, 07:28:53 »

So CMY extras are all gone?

qwack · « **Reply #1392 on:** Sat, 21 May 2016, 07:50:22 »

Quote from: Fiery on Sat, 21 May 2016, 05:41:38

I have a quick question. Did anyone else get warped space bars? the one that fits on my Pok3r ends up sometimes not allowing the switch to pop back up. and looks curved. All the other caps are perfect though and I ended up ordering another set...

That's a common issue with PBT spacebars (my three spacebars from a blank Gateron set are slightly warped too), but it can be fixed easily, generally with warm water or a hair dryer. I don't remember the details, but I'm sure a quick search will give you a proper idea on how to proceed.

Shadovved · « **Reply #1393 on:** Sat, 21 May 2016, 08:14:27 »

Quote from: jebbra on Sat, 21 May 2016, 07:28:53

So CMY extras are all gone?

There'll be back ordered ones in 1-2 months. So if you place an order now you'll need to wait.

Fiery · « **Reply #1394 on:** Sat, 21 May 2016, 08:26:10 »

Quote from: qwack on Sat, 21 May 2016, 07:50:22

Quote from: Fiery on Sat, 21 May 2016, 05:41:38
I have a quick question. Did anyone else get warped space bars? the one that fits on my Pok3r ends up sometimes not allowing the switch to pop back up. and looks curved. All the other caps are perfect though and I ended up ordering another set...

That's a common issue with PBT spacebars (my three spacebars from a blank Gateron set are slightly warped too), but it can be fixed easily, generally with warm water or a hair dryer. I don't remember the details, but I'm sure a quick search will give you a proper idea on how to proceed.

Oh thanks for the response, I'll look into trying to fix it then

Willyc277 · « **Reply #1395 on:** Sat, 21 May 2016, 12:23:01 »

Quote from: y2bd on Fri, 20 May 2016, 19:53:07

Got my caps today even though they shipped last Friday, crazy fast! Got BWB, Ghost White, and CMYK mods. Very pretty sets!

Will post pics later. Until then, has anyone had issues with the heights of the caps? They don't seem to agree with my ErgoClears board, the bottoming out feels mushy like there are o-rings, and it's an inconsistent feel that seems to vary from key to key. They work fine on my Gateron Yellow board though (and other PBT caps work fine on the EC board) so I have no qualms.

Edit: thought about it, realized it's probably an issue with the in-switch LEDs grinding up against the caps.

Are the LEDs in the north position? I've had that issue with a few sets on my b.87

nyunyu · « **Reply #1396 on:** Sat, 21 May 2016, 13:11:28 »

Quote from: Potatoes on Fri, 20 May 2016, 19:45:44

Didn't know the stepped caps lock has a different stem alignment from the non-stepped, though. Never actually had one before. Not a biggy as I was on the fence on using it to begin with.

Cherry keyboards use stepped Caps Lock caps, and their switch is at the center of the 1.25U wide top part.

But there are several exceptions, like my MX-Board 2.0 (G80-3800), which has low profile caps, not the regular Cherry ones.
This keyboard has its switch at the center of 1.5U, so neither the full, nor the stepped Caps can be fitted on in.

So I had to use one spare R1 1.5U cap.

Shadovved · « **Reply #1397 on:** Sat, 21 May 2016, 13:24:27 »

Updated the stock list in OP with stuff coming in early-June (aka the Light/Beige dual and the USDARK 1800 kit and those orders that came in before that)

So anything that is negative now will need to wait 1-2 months from now.

AND trying to deal with something that started from a missent package, just hoping the other guy will not stoop to a new low on GH.

MMKB · « **Reply #1398 on:** Sat, 21 May 2016, 18:28:34 »

Super smooth group buy. Thanks Shadovved!

trenzafeeds · « **Reply #1399 on:** Sat, 21 May 2016, 18:45:04 »

Quote from: Shadovved on Sat, 21 May 2016, 13:24:27

AND trying to deal with something that started from a missent package, just hoping the other guy will not stoop to a new low on GH.

youuuuu bet he will!

News:

Author Topic: Shadovved's Group Buy Directory (Read 645174 times)