[GB] DSA Dolch ISO + Expansions/DSA RGBY/DSA DOLCH Blank Sets [REFUNDING]

[longweight]

So the Ergodox set covers the whole board?

[longweight]

Ordered!

[domoaligato]

I have been very busy with a project at work.
my day job has been interfering with this. sorry.
I will get it taken care of hopefully soon.

[ApocalypseMaow]

I have been very busy with a project at work.
my day job has been interfering with this. sorry.
I will get it taken care of hopefully soon.

Take your time! We need to get more people signed up anyway!!!

[korrelate]

Quick question.... just to confirm and sorry if this sounds too picky. Kit 5 are all blank, right? NO legends? Just double checking because it says " 1 x 1.25 SHIFT." Just want to confirm, particularly for this key, that none of the keys in Kit5 have any legends whatsoever.

Thanks!

[gnubag]

Quick question.... just to confirm and sorry if this sounds too picky. Kit 5 are all blank, right? NO legends? Just double checking because it says " 1 x 1.25 SHIFT." Just want to confirm, particularly for this key, that none of the keys in Kit5 have any legends whatsoever.

Thanks!

well before shift it says blank so I think you are good.

[Matt3o]

read "shift" as "in lieu of shift"

[longweight]

Are the current prices still correct? Could we get the number of orders next to each one please?

[gnubag]

Are the current prices still correct? Could we get the number of orders next to each one please?

ORDER Confirmation
https://docs.google.com/spreadsheet/ccc?key=0Aj1T_i7vHuXUdEtXaTI3REdETHRkR0JkZnVFN3BQdHc&usp=sharing&output=html

[Latin00032]

Any updates on the offset caps lock? I was hoping there would be a way to include it in an existing group?

[bazemk1979]

Any updates on the offset caps lock? I was hoping there would be a way to include it in an existing group?

OP said he will work on this when he gets time, we are waiting for this to happen.

[reiuorw]

great!

[kenmai9]

Ordered kit 3

[domoaligato]

I have finally got around to sending the new kit configurations to SP.
they will be as follows. pricing to follow soon.
I combined a few kits together.
this should guarantee that the iso keys get made.
I understand that some will not like this because they may have to pay for they do not need.
please stay in the groupbuy and wait to see where the pricing lands at the deadline.
If the prices do not hit the sweat spots then I will extend the deadline.
the original intention was to make iso kits available.

I want to make sure that happens.


kit 1 is going to no longer be available. merged below

Kit 2
DSA RGBY Kit 2.1
 - 2x 1.25u Red CONTROL w/legends
 - 2x 1.25u Blue ALT w/legends
 - 1x 2.25u Green SHIFT w/legends
 - 1x 2.75u Green SHIFT w/legends
 - 2x 1.25 Yellow WIN w/legends
 - 1x 1.25u Yellow MENU w/legends
 - 1x 1.25u Yellow FN w/legends
 - 1x 1.25u Green SHIFT - Pure short right SHIFT w/legends
 - 1x 1.75u Green SHIFT - short left SHIFT w/legends
 - 2x 1.5u Red CONTROL w/legends
 - 2x 1.5u Blue ALT w/legends
 - 2x 1u Red CONTROL w/legends
 - 2x 1u Blue ALT w/legends
 - 2x 1u Yellow WIN w/legends
 - 1x 1u Yellow MENU w/legends
 - 2x 1u Yellow FN w/legends
 - 2x 1u GX CTRL w/legends
 - 2x 1u GX ALT w/legends

Kit3 - Tenkeyless Base Kit
 - 19x 1u GX blanks
 - 53x 1u GE blanks
 - 2x 1.5u GX blanks tab, \|
 - 1x 2u GX blank backspace
 - 1x 1.75u GX blanks capslock full touch center stem
 - 1x 2.25u GX blanks RETURN, SHIFT
 - 1x 2.75U GX blanks SHIFT
 - 7x 1.25u GX blanks Mods
 - 1x 6.25u GE DSA Spacebar
 - 1x 6.25u GE DCS Universal Spacebar

Kit4 - Tenkey Kit
Tenkey Kit - 26 keys total
 - 15x 1u GE blanks
 - 1x 1u GE blank deepdish
 - 3x 2u GE blanks
 - 5x 1u GX blanks
 - 2x 2u GX blanks

Kit5
Alternate Modifers/spacebars/iso/capslocks
 - 4x 1.5u GX blanks CONTROL, ALT
 - 7x 1u GX blanks WIN, MENU, FN, 2x Extra 1u for short L and short R
 - 1x 1.25u GX blanks SHIFT
 - 1x 1.75u GX blanks SHIFT
 - 1x 6u DSA GE Spacebar
 - 1x 6u DCS GE Spacebar
 - 1x 7u GE DSA Spacebar
 - 1x 7u GE DCS Spacebar
 - 1x ISO dcs gx RETURN Key with legends
 - 1x ISO dcs gx RETURN blank
 - 1x 1.25u gx dsa Short ansi RETURN with legends
 - 1x 1.25u gx dsa Short ansi blank
 - 1x 1.25u gx DSA shift with legends
 - 1x 1.25u gx DSA shift blank
 - 1x 1u ge \| with legends
 - 1x 1u gx \| with legends
 - 1x 1u gx BACK with legends
 - 1x 1.75u DSA GX Stepped CAPS LOCK - Left Stem with legends
 - 1x 1.75u DSA GX Stepped CTRL           - Left Stem with legends
 - 1x 1.75u DSA GX Stepped SHIFT LOCK - Left Stem with legends
 - 1x 1.75u DSA GX Stepped Capslock      - Left Stem blank
 - 1x 1.75u DSA GX Stepped Capslock      - Left Stem blank w/ led window
 - 1x 1.75u DSA GX full touch blank off side stem Capslock


Kit6 - ErgoDox Complete Kit
ErgoDox Complete Kit - 76 keys total
 - 12x 1.5u gx blanks
 - 4x   2u   ge blanks
 - 18x 1u   gx blanks
 - 42x 1u   ge blanks

Gamer kits(deepdish of the standard colors)
two kits available

Kit 7
GE Blank Gamer Kit
8 keys total to allow full homerow (asdf & JKL:) + gamer positions (in wasd/esdf & ijkl)
 - 8x 1u GE blanks deepdish F,J,WASD,I,JKL

Kit 8
GX Blank Gamer Kit
8 keys total to allow full homerow (asdf & JKL:) + gamer positions (in wasd/esdf & ijkl)
 - 8x 1u GX blanks deepdish F,J,WASD,I,JKL

kit 9 is going to no longer be available. merged above

[pasph]

How to update/redo from scratch the order (when you publish new pricing)?

[domoaligato]

How to update/redo from scratch the order (when you publish new pricing)?

When the order form is changed and pricing posted I will post here stating it is fixed.
then submit a new order and pm me to delete the old one.

[bazemk1979]

Ok I see you have added the ISO modifiers to the RGBY, smart move. I don't see the logic mixing the kit 5 with blanks and legends keys, but its ok. If you already added stuff to the RGBY why didn't you add the off stemmed stepped caplsock?  its 1 key only... in order to have the off stemmed  stepped capslock AKA 1 key only, we have to pay 30-50 bucks for Kit 5 ??

Long live Merica and whatever logic is left in it!!!!

[domoaligato]

I did not add the iso kit to the rgby kit.
I added the 1u keys that were missing to the rgby kit.

I combined kit 1 and kit 9 into kit 5 as I should have done in the beginning.
(this is what many experienced groupbuy running members suggested up front.)

kit5 now has every key you need for any custom keyboard to be complete between drugers groupbuy and the blanks sets.

Why you ask?
almost everyone that ordered kit5 will need the offcenter caplocks for Kmac's, phantom's, gh60's, etc's
I am not going to split the capslocks keys up and spread them across kits that they do not make logical sense to be in.

let me ask you this...
Why would I add one stepped capslock to the rgby kit?
Why does this make sense to you?

[longweight]

Could you add running totals for each set to the spreadsheet? No problem if you are too busy!

[domoaligato]

Could you add running totals for each set to the spreadsheet? No problem if you are too busy!

it is at the very top. first line

[longweight]

Could;9 you add running totals for each set to the spreadsheet? No problem if you are too busy!

it is at the very top. first line

Sorry

[domoaligato]

Ok I see you have added the ISO modifiers to the RGBY, smart move. I don't see the logic mixing the kit 5 with blanks and legends keys, but its ok. If you already added stuff to the RGBY why didn't you add the off stemmed stepped caplsock?  its 1 key only... in order to have the off stemmed  stepped capslock AKA 1 key only, we have to pay 30-50 bucks for Kit 5 ??

Long live Merica and whatever logic is left in it!!!!

there are 6 capslocks.
 - 1x 1.75u DSA GX Stepped CAPS LOCK - Left Stem with legends
 - 1x 1.75u DSA GX Stepped CTRL           - Left Stem with legends
 - 1x 1.75u DSA GX Stepped SHIFT LOCK - Left Stem with legends
 - 1x 1.75u DSA GX Stepped Capslock      - Left Stem blank
 - 1x 1.75u DSA GX Stepped Capslock      - Left Stem blank w/ led window
 - 1x 1.75u DSA GX full touch blank off side stem Capslock

[domoaligato]

Could;9 you add running totals for each set to the spreadsheet? No problem if you are too busy!

it is at the very top. first line

Sorry

No problem!. I think I will highlight the row because so many people have asked about it.

[bazemk1979]

Ok I see you have added the ISO modifiers to the RGBY, smart move. I don't see the logic mixing the kit 5 with blanks and legends keys, but its ok. If you already added stuff to the RGBY why didn't you add the off stemmed stepped caplsock?  its 1 key only... in order to have the off stemmed  stepped capslock AKA 1 key only, we have to pay 30-50 bucks for Kit 5 ??

Long live Merica and whatever logic is left in it!!!!

there are 6 capslocks.
 - 1x 1.75u DSA GX Stepped CAPS LOCK - Left Stem with legends
 - 1x 1.75u DSA GX Stepped CTRL           - Left Stem with legends
 - 1x 1.75u DSA GX Stepped SHIFT LOCK - Left Stem with legends
 - 1x 1.75u DSA GX Stepped Capslock      - Left Stem blank
 - 1x 1.75u DSA GX Stepped Capslock      - Left Stem blank w/ led window
 - 1x 1.75u DSA GX full touch blank off side stem Capslock

Ok then I definatelly need to B slap my self, I see no stepped capslock in RGBY, only in kit 5 which is totally separate set. I don't bother you merged RGBY with ISO RGB modifiers its cool, but where is the logic of buying the RGBY Set 2 and buying Set 5 only for the stepped capslock? that's 50 cojones for 1 key...

Copy paste your new formatted RGBY Kit 2, I see no stepped capslock or the rest of the stepped keys.


Kit 2
DSA RGBY Kit 2.1
 - 2x 1.25u Red CONTROL w/legends
 - 2x 1.25u Blue ALT w/legends
 - 1x 2.25u Green SHIFT w/legends
 - 1x 2.75u Green SHIFT w/legends
 - 2x 1.25 Yellow WIN w/legends
 - 1x 1.25u Yellow MENU w/legends
 - 1x 1.25u Yellow FN w/legends
 - 1x 1.25u Green SHIFT - Pure short right SHIFT w/legends
 - 1x 1.75u Green SHIFT - short left SHIFT w/legends
 - 2x 1.5u Red CONTROL w/legends
 - 2x 1.5u Blue ALT w/legends
 - 2x 1u Red CONTROL w/legends
 - 2x 1u Blue ALT w/legends
 - 2x 1u Yellow WIN w/legends
 - 1x 1u Yellow MENU w/legends
 - 2x 1u Yellow FN w/legends
 - 2x 1u GX CTRL w/legends
 - 2x 1u GX ALT w/legends

Where is the Stepped Caps lock? please add it and let the RGBY stretch its legs even further, its only 1 key......

[Matt3o]

wow... I'm lost...

[bazemk1979]

wow... I'm lost...

no need to be lost, I can see the math behind merging RGBY with even more keys to expend it more and kill some sets that are weak on numbers.

OP knows that people didn't get the stepped capslock trough RD GB and its variants, so here is a chance to pay for Kit 5 of 20 keys plus in order to have 1 key that's needed. Its like going to shop for groceries and I come home with a loan for a brand new car. Long live Merica!!!

Person that needs stepped key, just any of them needs to buy all of the rest almost 30 keys ( set 5) I don't know if this is to push numbers, or make it more simple so keys wont get lost or missing keys from SP in general. Toss it it or turn it I doubt people would pay that much money over needing 1 key, bad business.

Kit5
Alternate Modifers/spacebars/iso/capslocks
 - 4x 1.5u GX blanks CONTROL, ALT
 - 7x 1u GX blanks WIN, MENU, FN, 2x Extra 1u for short L and short R
 - 1x 1.25u GX blanks SHIFT
 - 1x 1.75u GX blanks SHIFT
 - 1x 6u DSA GE Spacebar
 - 1x 6u DCS GE Spacebar
 - 1x 7u GE DSA Spacebar
 - 1x 7u GE DCS Spacebar
 - 1x ISO dcs gx RETURN Key with legends
 - 1x ISO dcs gx RETURN blank
 - 1x 1.25u gx dsa Short ansi RETURN with legends
 - 1x 1.25u gx dsa Short ansi blank
 - 1x 1.25u gx DSA shift with legends
 - 1x 1.25u gx DSA shift blank
 - 1x 1u ge \| with legends
 - 1x 1u gx \| with legends
 - 1x 1u gx BACK with legends
 - 1x 1.75u DSA GX Stepped CAPS LOCK - Left Stem with legends
 - 1x 1.75u DSA GX Stepped CTRL           - Left Stem with legends
 - 1x 1.75u DSA GX Stepped SHIFT LOCK - Left Stem with legends
 - 1x 1.75u DSA GX Stepped Capslock      - Left Stem blank
 - 1x 1.75u DSA GX Stepped Capslock      - Left Stem blank w/ led window
 - 1x 1.75u DSA GX full touch blank off side stem Capslock

[domoaligato]

the people that need stepped capslocks don't need rgby kits. they need 1.5 mods and or 6u/7u spacebars.
I still do not understand your logic.

[bazemk1979]

the people that need stepped capslocks don't need rgby kits. they need 1.5 mods and or 6u/7u spacebars.
I still do not understand your logic.

Ok lets see the logic behind all of it:

- People that already bought the full set trough RD, will buy the RGBY as an extra deco, same people were pleading for the stepped capslock.... ( after all its matching since the set is DS)

- people that buy the stepped keys buying them because they need the 1.5, 1.0 mods and x7 spacebar?  Hmmmm we have all the 1.5 , 1.0 mods and x7 spacebar in the RD set.... the only reason this GB is going forward because of the existence of the RD full sets GB.

Read the postings on RD how many people requested for the stepped key, sure we can have it now but we have to buy 25 + keys, thanks for making it easier for me to choose, I vote with my wallet.

EDIT: Still scratching my head why the stepped DS keys were not as a separate kit, while you could of add the blanks stepped with the TKL blank set.

[domoaligato]

no need to be lost, I can see the math behind merging RGBY with even more keys to expend it more and kill some sets that are weak on numbers.

I added a few 1u keys to thee rgby kit for people that need them to match the model lysol used for the purple gmk/cmyk mod kits.

OP knows that people didn't get the stepped capslock trough RD GB and its variants, so here is a chance to pay for Kit 5 of 20 keys plus in order to have 1 key that's needed. Its like going to shop for groceries and I come home with a loan for a brand new car. Long live Merica!!!

I have no response to this.

Person that needs stepped key, just any of them needs to buy all of the rest almost 30 keys ( set 5) I don't know if this is to push numbers, or make it more simple so keys wont get lost or missing keys from SP in general. Toss it it or turn it I doubt people would pay that much money over needing 1 key, bad business.

I am not going to sell one key individually.
I ran the numbers and the majority of the users placing orders for the iso kits and or capslock kits also placed orders for the alternate mods kit. by combining them I am simplifying the orders and guaranteeing fare pricing for the iso kits.

I will stay professional regardless of how I am treated.
This is my first group buy and I have learned quickly that I can not make everyone happy.

[domoaligato]

the people that need stepped capslocks don't need rgby kits. they need 1.5 mods and or 6u/7u spacebars.
I still do not understand your logic.

Ok lets see the logic behind all of it:

- People that already bought the full set trough RD, will buy the RGBY as an extra deco, same people were pleading for the stepped capslock.... ( after all its matching since the set is DS)

- people that buy the stepped keys buying them because they need the 1.5, 1.0 mods and x7 spacebar?  Hmmmm we have all the 1.5 , 1.0 mods and x7 spacebar in the RD set.... the only reason this GB is going forward because of the existence of the RD full sets GB.

Read the postings on RD how many people requested for the stepped key, sure we can have it now but we have to buy 25 + keys, thanks for making it easier for me to choose, I vote with my wallet.

EDIT: Still scratching my head why the stepped DS keys were not as a separate kit, while you could of add the blanks stepped with the TKL blank set.

you have ordered nothing but 1 rgby kit.
stop threadcrapping and I will give you a f-ing caplock

[bazemk1979]

You can never make everyone happy, and no one is treating you bad buddy. Do as you please, numbers will speak the truth.

[bazemk1979]

the people that need stepped capslocks don't need rgby kits. they need 1.5 mods and or 6u/7u spacebars.
I still do not understand your logic.

Ok lets see the logic behind all of it:

- People that already bought the full set trough RD, will buy the RGBY as an extra deco, same people were pleading for the stepped capslock.... ( after all its matching since the set is DS)

- people that buy the stepped keys buying them because they need the 1.5, 1.0 mods and x7 spacebar?  Hmmmm we have all the 1.5 , 1.0 mods and x7 spacebar in the RD set.... the only reason this GB is going forward because of the existence of the RD full sets GB.

Read the postings on RD how many people requested for the stepped key, sure we can have it now but we have to buy 25 + keys, thanks for making it easier for me to choose, I vote with my wallet.

EDIT: Still scratching my head why the stepped DS keys were not as a separate kit, while you could of add the blanks stepped with the TKL blank set.

you have ordered nothing but 1 rgby kit.
stop threadcrapping and I will give you a f-ing caplock

I already bought the full set + numpad + WASD + 5 sets of windowed blanks, what is that you offer besides the RGBY that I need? Ok yes you offer the Capslock with 25 keys more LOL. No worries OP I will find it later on in the classifieds.

[domoaligato]

the people that need stepped capslocks don't need rgby kits. they need 1.5 mods and or 6u/7u spacebars.
I still do not understand your logic.

Ok lets see the logic behind all of it:

- People that already bought the full set trough RD, will buy the RGBY as an extra deco, same people were pleading for the stepped capslock.... ( after all its matching since the set is DS)

- people that buy the stepped keys buying them because they need the 1.5, 1.0 mods and x7 spacebar?  Hmmmm we have all the 1.5 , 1.0 mods and x7 spacebar in the RD set.... the only reason this GB is going forward because of the existence of the RD full sets GB.

Read the postings on RD how many people requested for the stepped key, sure we can have it now but we have to buy 25 + keys, thanks for making it easier for me to choose, I vote with my wallet.

EDIT: Still scratching my head why the stepped DS keys were not as a separate kit, while you could of add the blanks stepped with the TKL blank set.

you have ordered nothing but 1 rgby kit.
stop threadcrapping and I will give you a f-ing caplock

I already bought the full set + numpad + WASD + 5 sets of windowed blanks, what is that you offer besides the RGBY that I need? Ok yes you offer the Capslock with 25 keys more LOL. No worries OP I will find it later on in the classifieds.

you won't have to. I am a man of my word. I will send you one with your rgby kit.

[domoaligato]

changes complete.
if you have questions about your order or need order changes please PM me.

[bazemk1979]

the people that need stepped capslocks don't need rgby kits. they need 1.5 mods and or 6u/7u spacebars.
I still do not understand your logic.

Ok lets see the logic behind all of it:

- People that already bought the full set trough RD, will buy the RGBY as an extra deco, same people were pleading for the stepped capslock.... ( after all its matching since the set is DS)

- people that buy the stepped keys buying them because they need the 1.5, 1.0 mods and x7 spacebar?  Hmmmm we have all the 1.5 , 1.0 mods and x7 spacebar in the RD set.... the only reason this GB is going forward because of the existence of the RD full sets GB.

Read the postings on RD how many people requested for the stepped key, sure we can have it now but we have to buy 25 + keys, thanks for making it easier for me to choose, I vote with my wallet.

EDIT: Still scratching my head why the stepped DS keys were not as a separate kit, while you could of add the blanks stepped with the TKL blank set.

you have ordered nothing but 1 rgby kit.
stop threadcrapping and I will give you a f-ing caplock

I already bought the full set + numpad + WASD + 5 sets of windowed blanks, what is that you offer besides the RGBY that I need? Ok yes you offer the Capslock with 25 keys more LOL. No worries OP I will find it later on in the classifieds.

you won't have to. I am a man of my word. I will send you one with your rgby kit.

thanks and I'll make sure I cover the cost

[domoaligato]

all duplicate orders and merge requests completed.

[ApocalypseMaow]

Awesome Dom!!! That mixing of the kits worked out really well!
Thanks for staying on top of things.

[domoaligato]

I have a very demanding IT job and I know that it took me a extra week to get this back on track and I am sorry for that.
Let the DSA Dolch Madness continue!

[Elrick]

I have a very demanding IT job and I know that it took me a extra week to get this back on track and I am sorry for that.
Let the DSA Dolch Madness continue!

Very nice.  Thank you for running this.  It'll make the Dolch almost PERFECT with these add-ons  .

[TGVarik]

Ordered 2x ErgoDox kits. I think that makes 15 and the next tier.

Thanks, domo.

[elton5354]

There's not much time before closing and the tiers are still pretty low for TKL set..are you planning on extending the deadline? I don't think I want to pay $72 for blanks..

[Matt3o]

thanks domoaligato for your work, really appreciated. I know what it means running a GB.

bazemk1979, I'm sure domoaligato appreciated your input, by try to respect his position.

[pasph]

Please extend the deadline

[longweight]

I would have to drop the TKL set at the current price, I just can't afford it this month.

[bazemk1979]

thanks domoaligato for your work, really appreciated. I know what it means running a GB.

bazemk1979, I'm sure domoaligato appreciated your input, by try to respect his position.

my apologies to him I know I went hot headed on his thread I think cutting on caffeine gets me in weird mood. I see his position, too many GB's happened at the same time, maeby extending the deadline is needed.

[Matt3o]

I reviewed my order and new pricing. I'm still in, all confirmed. Let's move on!

[ilezia]

Yeah alright I'm still in for the RGBY mods, thanks for organizing this group buy!

e. Misread something.

[vorn]

Yeah, I'm also still in. Order confirmed. I get paid July 25th, so that's gonna be one day before payment deadline.

[Tarzan]

Ordered.

Not sure I need all that I ordered, but rather have a few too many than be kicking myself later.   

Thanks for the ErgoDox set!  I've taken the plunge and ordered the PCBs via Massdrop as well. 

[ApocalypseMaow]

I wouldn't mind pushing it back a little... Just means I'm gonna order more!

Like Bazemk said, there were a lot of GBs this month. So I don't mind doing either!