Gateron - MX Stabilizer Clone - Made in China

[sprit]

Gateron       www.gateron.com   

http://www.gateron.com/page153?product_id=58&brd=1
http://detail.1688.com/offer/43041617408.html?spm=a2615.2177701.0.0.V5Uhlw 
https://geekhack.org/index.php?topic=68943.msg1726319#msg1726319 

-  Plate mount type only (Samples are coming to me)  -  PCB mount types  >  Not! Exist 25 April
-  Price : 1 pcs = $0.06    1set 10pcs = $0.60     MOQ =100,000 pcs      >   No Wires!  25 Apr.
-  Quality?  : Unknown,  6.25u Wire  Unknown,  7u wire unknown   >  No Wires!  25 Apr.
     

   

 

[Dihedral]

100, 000 MOQ?

[Giorgio]

100'000 is not impossible to reach. Just decide that each order should have a moq of 100 pieces, for a total of $6, which translates to 1000 orders.
Sadly, it's more complicated than that, because I highly doubt that wires are included.

100, 000 MOQ?

[Prelim]

is it just me or their PBT caps look like thick BSP? 

http://www.gateron.com/page153?product_id=57&brd=1


MOQ seems to be 1000, however I can't figure out is caps or sets! :/ Since 100¥ is ~$15 it should be the entire set... BSP sets cost ~10 times more, just do the math
http://detail.1688.com/offer/43041557394.html?spm=a2615.2177701.0.0.fSyPuT

[sethk_]

is it just me or their PBT caps look like thick BSP? 

http://www.gateron.com/page153?product_id=57&brd=1

Show Image

MOQ seems to be 1000, however I can't figure out is caps or sets! :/ Since 100¥ is ~$15 it should be the entire set... BSP sets cost ~10 times more, just do the math ;)
http://detail.1688.com/offer/43041557394.html?spm=a2615.2177701.0.0.fSyPuT

I think these are the ones berserkerfan has

[Lpwl]

is it just me or their PBT caps look like thick BSP? 

http://www.gateron.com/page153?product_id=57&brd=1

Show Image

MOQ seems to be 1000, however I can't figure out is caps or sets! :/ Since 100¥ is ~$15 it should be the entire set... BSP sets cost ~10 times more, just do the math ;)
http://detail.1688.com/offer/43041557394.html?spm=a2615.2177701.0.0.fSyPuT

Shadovved will probably run a GB for these caps  ;)

(source : [GB] Gateron Switch)

EDIT :

But here are a few numbers :

   - MOQ : 200 sets (or 250 ?)
   - Price per set : $31 (+ shipping)

(source : [IC] thread)

[Prelim]

Shadovved will probably run a GB for these caps 

(source : [GB] Gateron Switch)

EDIT :

But here are a few numbers :

   - MOQ : 200 sets (or 250 ?)
   - Price per set : $31 (+ shipping)

nice to know, but $31 for a set which cost $15 on Gateron? lol... guess I'll making GBs myself @@

[Flyersfan1]

I hope these are better than the Hammer branded stabilizers, those suck.

[Lpwl]

Hammer ones are PCB-mounted.


(image from imsto.cn)

[MrexD]

I'd love to replace the stock poker stabilisers.
spacebar wire is bent and causes rattle though.
hope these come with wires

[sprit]

Been dreaming of New Transparent stabs for years, feeling building new moulds will not that necessary at this moment, got 3-4 contacts to produce Black stabs at high Moq w poor or ordinary quality,  but i want transparent n -lucent !   Someday my things will come?   

[Giorgio]

Surely transparent stabs are much less resistant to abrasion and offer more resistance, plus they are much more fragile.

Been dreaming of New Transparent stabs for years, feeling building new moulds will not that necessary at this moment, got 3-4 contacts to produce Black stabs at high Moq w poor or ordinary quality,  but i want transparent n -lucent !   Someday my things will come?   

[sprit]

I'd love to replace the stock poker stabilisers.
spacebar wire is bent and causes rattle though.
hope these come with wires

I guess you just need To replace the spacebar wire only,   I got some custom stainless wires made at a factory, if you need it, pm me 

[sprit]

Reply from Gateron,  for Stabs

:  Plate mount type only,  No Wires!
 
不能拿来做透明的pc/abs
收缩率不同，模具尺寸不一样，做出来的产品尺寸不一样的
黑色的，可以报给你
但是，我们没有卫星轴的钢丝   
 
Unable to use Transparent PC/ABS material (into the current ABS dedicated mould)
Due to the plastic shrink ratios differ,  the dimensions of the moulds differ in details
Current Black ABS plastic parts are available
But, we don't have metal wires for stabilizers   
 

[StinkyTheDonut]

Been dreaming of New Transparent stabs for years, feeling building new moulds will not that necessary at this moment, got 3-4 contacts to produce Black stabs at high Moq w poor or ordinary quality,  but i want transparent n -lucent !   Someday my things will come?   

I've been looking at those white costar stabs on taobao.
They seem to look translucent like Gateron switch housing.
They aren't cherry stabs, but they are probably the next closest to your dream. lol

I'm want to get some but I can't seem to find any information about their quality. =(

[wlhlm]

Been dreaming of New Transparent stabs for years, feeling building new moulds will not that necessary at this moment, got 3-4 contacts to produce Black stabs at high Moq w poor or ordinary quality,  but i want transparent n -lucent !   Someday my things will come?   

I've been looking at those white costar stabs on taobao.
They seem to look translucent like Gateron switch housing.
They aren't cherry stabs, but they are probably the next closest to your dream. lol

I'm want to get some but I can't seem to find any information about their quality. =(

Can you post a link to the stabs?

[StinkyTheDonut]

Been dreaming of New Transparent stabs for years, feeling building new moulds will not that necessary at this moment, got 3-4 contacts to produce Black stabs at high Moq w poor or ordinary quality,  but i want transparent n -lucent !   Someday my things will come?   

I've been looking at those white costar stabs on taobao.
They seem to look translucent like Gateron switch housing.
They aren't cherry stabs, but they are probably the next closest to your dream. lol

I'm want to get some but I can't seem to find any information about their quality. =(

Can you post a link to the stabs?

Here's a link to a random vendor with pics.
http://item.taobao.com/item.htm?spm=a230r.1.14.58.GjEDPM&id=43764958283&ns=1&abbucket=16#detail
Many of the vendors seem to sell both blacks and whites for both the inserts and plate mounts, but only have images of the blacks.

[wlhlm]

Thanks!

[StinkyTheDonut]

Thanks!

No problem

[sprit]

Thanks!

No problem

Thanks here too!   Still looking for quality MX Stab clones