Will the gb have a PCB?
Edit: also how long will the pre order be open
Are these still the anodized aluminum, similar to your other buys?
Will the gb have a PCB?
Edit: also how long will the pre order be open
Pre orders until end of february, where the real GB starts. There will hopefully be a GON GB later, but not with these plates.
Will the gb have a PCB?
Edit: also how long will the pre order be open
Pre orders until end of february, where the real GB starts. There will hopefully be a GON GB later, but not with these plates.
Okay! When I get more money I'll be in haha
Will the gb have a PCB?
Edit: also how long will the pre order be open
Pre orders until end of february, where the real GB starts. There will hopefully be a GON GB later, but not with these plates.
Okay! When I get more money I'll be in haha
You will have plenty off time to decide.
Will the gb have a PCB?
Edit: also how long will the pre order be open
Pre orders until end of february, where the real GB starts. There will hopefully be a GON GB later, but not with these plates.
Okay! When I get more money I'll be in haha
You will have plenty off time to decide.
What other pcbs do you think would work with this? I'm tempted to get this as a graduation present to myself.
Do any of these have a split backspace or normal 2u backspace?
Do any of these have a split backspace or normal 2u backspace?
Thanks, cool! In! (EDIT: Errr... let me check my keyboard funds...)Do any of these have a split backspace or normal 2u backspace?You can choose :D
When will the pre-orders be billed and charged?Not sure yet. Stay tuned.
Noob question, is the later group buy going to include PCB, case, etc? If not which PCB should I pick up for this HHkB plate?This GB is just for a plate. It can be used in any of your custom builds.
7u PCB mount stabs are pretty hard to come by. Not sure how many people are going to jump on the plate without them.I have a source in my next GB, if that is going to run. I'd be happy to hold your order here to wait for the next potential GB.
Do you have a list of potential sources for people who are interested?
I bought a 7u stab set from imsto store and they took 79 days to arrive 😩
Noob question, is the later group buy going to include PCB, case, etc? If not which PCB should I pick up for this HHkB plate?
OK cool thanks!7u PCB mount stabs are pretty hard to come by. Not sure how many people are going to jump on the plate without them.I have a source in my next GB, if that is going to run. I'd be happy to hold your order here to wait for the next potential GB.
Do you have a list of potential sources for people who are interested?
I bought a 7u stab set from imsto store and they took 79 days to arrive 😩
Count me in, but I'll wait some more days to be sure where I can actually have it shipped.SEPA is cool.
BTW, will you accept SEPA over PayPal (greedy) fees?
Great. Will order in next week.Count me in, but I'll wait some more days to be sure where I can actually have it shipped.SEPA is cool.
BTW, will you accept SEPA over PayPal (greedy) fees?
7u PCB mount stabs are pretty hard to come by. Not sure how many people are going to jump on the plate without them.BTW you can use the plastic bits from any PCB-mount stab and bend a wire yourself. It'll probably won't be as good as an official one, but it works until the real ones arrive. I've done this once and it was a bit more rattly because the wire I used was slightly thinner than the normal stab wire.
Do you have a list of potential sources for people who are interested?
I bought a 7u stab set from imsto store and they took 79 days to arrive 😩
7u PCB mount stabs are pretty hard to come by. Not sure how many people are going to jump on the plate without them.
Do you have a list of potential sources for people who are interested?
I bought a 7u stab set from imsto store and they took 79 days to arrive 😩
Wait.. I don't get it. plate for HHKB? Isn't HHKB case-mounted?Nope, nothing to do with the actual HHKB. It is for Cherry MX (compatible) switches. The point is that they support "HHKB-like layout" - i.e. something similar to this (https://i.imgur.com/ZVNKO8M.png) {google images 'gon hhkb'; the important difference is that GON's use a sandwich case (you can see the screws on the pics); these will be normally mounted in a separate case just like all the other 60% plates popping up recently).}
Wait.. I don't get it. plate for HHKB? Isn't HHKB case-mounted?
So, I jumped in for a set of WKL ANSI
I have a few questions... since I hopped on this, I'm hoping to build my absolute dream layout which actually showed up on a simple google search..Show Image(https://i.ytimg.com/vi/7faAcDTwMrE/maxresdefault.jpg)
Assuming I want to build something similar to this... can anyone point me in the direction of what I need to look for to make this a reality?
I need a custom PCB that supports 1.5 modifiers and a stepped capslock, and a 7u(?) spacebar with matching stabilizers?
If I can see correctly, I'm also a part of the EnjoyPBT GB for a purple set and a CMY modifier, will all those caps fit this build?
Sorry if I'm asking any questions already being answered, I just want to know what I'm getting into!
Thank you!!
Edit: If there is anyone available to help me figure out what I need to do that wants to PM me instead of cluttering this thread up, that would be appreciated as well!
So, I jumped in for a set of WKL ANSI
I have a few questions... since I hopped on this, I'm hoping to build my absolute dream layout which actually showed up on a simple google search..Show Image(https://i.ytimg.com/vi/7faAcDTwMrE/maxresdefault.jpg)
Assuming I want to build something similar to this... can anyone point me in the direction of what I need to look for to make this a reality?
I need a custom PCB that supports 1.5 modifiers and a stepped capslock, and a 7u(?) spacebar with matching stabilizers?
If I can see correctly, I'm also a part of the EnjoyPBT GB for a purple set and a CMY modifier, will all those caps fit this build?
Sorry if I'm asking any questions already being answered, I just want to know what I'm getting into!
Thank you!!
Edit: If there is anyone available to help me figure out what I need to do that wants to PM me instead of cluttering this thread up, that would be appreciated as well!
7u PCB mount stabs are pretty hard to come by. Not sure how many people are going to jump on the plate without them.
Do you have a list of potential sources for people who are interested?
I bought a 7u stab set from imsto store and they took 79 days to arrive 😩
Any plastic insert works, you only need the wires, that can be bended by you, or you can buy them from IMSTO, GON, Winkeyless.
7u PCB mount stabs are pretty hard to come by. Not sure how many people are going to jump on the plate without them.
Do you have a list of potential sources for people who are interested?
I bought a 7u stab set from imsto store and they took 79 days to arrive 😩
GON is awesome nowadays, my latest order arrived in less than 30days. Note that it was a full unassembled parts that I order..
Any plastic insert works, you only need the wires, that can be bended by you, or you can buy them from IMSTO, GON, Winkeyless.
Yea, like I said, it took over two months to get them from IMSTO.... GONs track record with being timely is pretty awful, although I heard he is better when you are only ordering parts.
Winkeyless seems to be $13.00 (USD) shipped to Canada, which isn't bad. Does anyone know of the speed which they ship out?
7u PCB mount stabs are pretty hard to come by. Not sure how many people are going to jump on the plate without them.
Do you have a list of potential sources for people who are interested?
I bought a 7u stab set from imsto store and they took 79 days to arrive 😩
Any plastic insert works, you only need the wires, that can be bended by you, or you can buy them from IMSTO, GON, Winkeyless.
Yea, like I said, it took over two months to get them from IMSTO.... GONs track record with being timely is pretty awful, although I heard he is better when you are only ordering parts.
Winkeyless seems to be $13.00 (USD) shipped to Canada, which isn't bad. Does anyone know of the speed which they ship out?
7u PCB mount stabs are pretty hard to come by. Not sure how many people are going to jump on the plate without them.
Do you have a list of potential sources for people who are interested?
I bought a 7u stab set from imsto store and they took 79 days to arrive 😩
Any plastic insert works, you only need the wires, that can be bended by you, or you can buy them from IMSTO, GON, Winkeyless.
Yea, like I said, it took over two months to get them from IMSTO.... GONs track record with being timely is pretty awful, although I heard he is better when you are only ordering parts.
Winkeyless seems to be $13.00 (USD) shipped to Canada, which isn't bad. Does anyone know of the speed which they ship out?
Hey I think you're my neighbour ! (you live in appartment 205 right ? I'm in 204).
Let me know if you want to order from WKL, we could split shipping costs :)
7u PCB mount stabs are pretty hard to come by. Not sure how many people are going to jump on the plate without them.
Do you have a list of potential sources for people who are interested?
I bought a 7u stab set from imsto store and they took 79 days to arrive 😩
Any plastic insert works, you only need the wires, that can be bended by you, or you can buy them from IMSTO, GON, Winkeyless.
Yea, like I said, it took over two months to get them from IMSTO.... GONs track record with being timely is pretty awful, although I heard he is better when you are only ordering parts.
Winkeyless seems to be $13.00 (USD) shipped to Canada, which isn't bad. Does anyone know of the speed which they ship out?
Hey I think you're my neighbour ! (you live in appartment 205 right ? I'm in 204).
Let me know if you want to order from WKL, we could split shipping costs :)
Erm......... yes, yes I think I am. :))
I will keep that in mind if I put in an order. Also, we should compare keyboard collections :)
hi LeandreN,
what will the 'covered' part look like? meaning no holes on the plate only or there will be some sort of blocker included?
hi LeandreN,
what will the 'covered' part look like? meaning no holes on the plate only or there will be some sort of blocker included?
No blockers, it's just that there are no cutouts there.
hi LeandreN,
what will the 'covered' part look like? meaning no holes on the plate only or there will be some sort of blocker included?
No blockers, it's just that there are no cutouts there.
hmm, need to see samples first then. might be a bit weird with a plate with no holes AND no blockers or sorts. :D
This is freaking awesome! Sorry for being 200% extremely über-noob but I have some questions:
1) you only sell the plate, right?
2) So I need to but the switches (of course), but also stabilizers, case, controller, and PCB?
3) where can I get all that?
4) is there the de facto standard soldering guide here like the mouse 2.0 guide?
I would really like to try this as my first soldering / custom project, but I am also completely new to this.
This is freaking awesome! Sorry for being 200% extremely über-noob but I have some questions:
1) you only sell the plate, right?
2) So I need to but the switches (of course), but also stabilizers, case, controller, and PCB?
3) where can I get all that?
4) is there the de facto standard soldering guide here like the mouse 2.0 guide?
I would really like to try this as my first soldering / custom project, but I am also completely new to this.
Somebody care to help me / answer my questions?
This is freaking awesome! Sorry for being 200% extremely über-noob but I have some questions:
1) you only sell the plate, right?
2) So I need to but the switches (of course), but also stabilizers, case, controller, and PCB?
3) where can I get all that?
4) is there the de facto standard soldering guide here like the mouse 2.0 guide?
I would really like to try this as my first soldering / custom project, but I am also completely new to this.
Somebody care to help me / answer my questions?
1. Yes this is only the plate
2. Yes you will need the switches, stabilizers, case, controller, and PCB
3. Winkeyless might be a good option
4. I'm not sure. I would ask around :(
This is freaking awesome! Sorry for being 200% extremely über-noob but I have some questions:
1) you only sell the plate, right?
2) So I need to but the switches (of course), but also stabilizers, case, controller, and PCB?
3) where can I get all that?
4) is there the de facto standard soldering guide here like the mouse 2.0 guide?
I would really like to try this as my first soldering / custom project, but I am also completely new to this.
Somebody care to help me / answer my questions?
1. Yes this is only the plate
2. Yes you will need the switches, stabilizers, case, controller, and PCB
3. Winkeyless might be a good option
4. I'm not sure. I would ask around :(
Thanks! Only think I'm wondering is...where to get a PCB? I mean.. you solder the switches also to the PCB right? So what I'm trying to say is, does the PCB also need to be a HHKB layout? Or am I that n00b on this?
About the PCB questions: any 60% PCB that supports the so-called 'winkeyless' or 'winkey' layout (namely 1.5u - 1u - 1.5u - 7u - 1.5u - 1u - 1.5u bottom row spacing) will work with both types of plates offered here.
I have yet to see an 'aftermarket' 60% PCB that does not support this. In other words, all the PCBs named in this thread here do support it. To be more specific: The B-Face (also X2) from winkeyless linked above, GON's Nerd 60 (http://www.gonskeyboardworks.com/pcbs-and-controllers/113-nerd-60-ver20-pcb.html), SPRiT's faceW (https://geekhack.org/index.php?topic=60887.0), true GH60, and all the variety of 60% PCBs found on taobao and aliexpress: 'satan GH60', 'red scarf II', 'AMJ60', ...
{Disclaimer: ordering from the Koreans generally works, the PCBs are of excellent quality; but can take a random amount of time. The true GH60 is also high quality. The Chinese PCBs are generally of acceptable quality, are cheap and tend to arrive in the advertised timeframe.}
{There's an IC for 'satan GH60' here on GH (https://geekhack.org/index.php?topic=79182.0); seems to be run by someone in China close to the source of these PCBs.}
Now I just need to find a HHKB bottom plate... Really excited to build a HHKB with Zealios switches.Hmm...? I think that the plates offered here will be of similar nature as LeandreN's previous buys for JDCarpe-design plates. That means that they will require a PCB (because of the stabs and some switches aren't fixed enough without a PCB), and they're meant to fit into "standard" 60% cases. I don't think it's possible to mount these plates as a "sandwich-style" case, i.e. top plate + bottom plate + PCB in between (i.e. like Plancks are) - the holes in them aren't right for this.
Entered the GB, can pay for the order with more candy :D :D
Entered the GB, can pay for the order with more candy :D :D
Disclaimer: The views or opinions of this member are not representative of the group buy leader.
Now I just need to find a HHKB bottom plate... Really excited to build a HHKB with Zealios switches.Hmm...? I think that the plates offered here will be of similar nature as LeandreN's previous buys for JDCarpe-design plates. That means that they will require a PCB (because of the stabs and some switches aren't fixed enough without a PCB), and they're meant to fit into "standard" 60% cases. I don't think it's possible to mount these plates as a "sandwich-style" case, i.e. top plate + bottom plate + PCB in between (i.e. like Plancks are) - the holes in them aren't right for this.
In for a HHKB. Turns out I'm not manly enough for the covered 1U between the 1.5u mods. Winkeyless without winkeys is just cruel.Haha!
Would I be able to use the HHKB plate on a V60? If I reassigned the keys via AHK?Only if the PCB supports the short right shift and the HHKB bottom row.
Duh! Haha sometimes I don't think. Thanks for the reply! Cheers!Would I be able to use the HHKB plate on a V60? If I reassigned the keys via AHK?Only if the PCB supports the short right shift and the HHKB bottom row.
Thanks for all the kind words. I will invoice when I have the samples.
What case would you recommend for the 7u spacebar? Will most work with that? This will be my first custom, so I just want to make sure I get the right parts for it. Cheers!The HHKB is 60% keyboard, so any Poker case will do.
Thanks for all the kind words. I will invoice when I have the samples.
I'm so excited for this plate. Keep us posted! I'm sure I'm not the only one who can hardly wait.
Yeah I figured any case would work, I just wanted to make double sure :thumb:What case would you recommend for the 7u spacebar? Will most work with that? This will be my first custom, so I just want to make sure I get the right parts for it. Cheers!The HHKB is 60% keyboard, so any Poker case will do.
If you want an aluminum case you can get a quality one from Pexon's store (http://pexonpcs.co.uk/collections/60-cases/products/60-silver-cnc-aluminium-case), otherwise China can offer you some nice plastic cases (http://www.aliexpress.com/item/Compact-Mini-Keyboard-GH60-plastic-Case-for-60-Mechanical-Keyboard-gh-60-Poker2-Pok3r-Faceu-60/32506927327.html?spm=2114.30010308.3.83.kFjxuk&ws_ab_test=searchweb201556_3,searchweb201644_4_505_506_503_504_301_502_10001_10002_10016_10017_10010_10005_10011_10006_10003_10004_401_10009_10008,searchweb201560_8,searchweb1451318400_-1,searchweb1451318411_6450&btsid=0b364187-f9e0-4e88-b368-dcff25900f61) (this is a lot for two cases). I own one and it's ok.
Lastly, there's a dedicatedd HHKB-like case interest check going on (https://geekhack.org/index.php?topic=78701.0), but I don't know how many kidneys it's gonna cost.
In for a couple plates :thumb:
Any chance for some purple plates?
In for a couple plates :thumb:
Any chance for some purple plates?
^^^^ purple
also, quick question... is there even a 60% plate that has a built-in cover/block for the windows keys? or is this just gonna be a bare kit.
thank you
In for a couple plates :thumb:
Any chance for some purple plates?
^^^^ purple
also, quick question... is there even a 60% plate that has a built-in cover/block for the windows keys? or is this just gonna be a bare kit.
thank you
The HHKB-style plates in this preorder will have blocks.
Is there a 60% non hhkb case that had a block built into the case?There's an interest check for such case. Read more here (https://geekhack.org/index.php?topic=78701.0).
In for 2. Couldn't resist at the price. Don't really know what I'll do with them, but I figure worst case I can just sell for my money back.
Thanks LeandreN! Your GBs are insane.
Hey, how can I join the GB? I remembered I filled the IC form, but where is the GB form?
Hey, how can I join the GB? I remembered I filled the IC form, but where is the GB form?
I am also wondering this. There is only a pre order form under the old info. And the other thread which was directed over here for the merge only had an IC form.
Waiting for round 5 with white PCB (maybe). ;D
Btw those stab are just for spacebar only or include the others too?
Double check: The backspace could be either 2u or splitted? and the right shift should be splitted, right? Sorry if this had been already answered.Yes.
Double check: The backspace could be either 2u or splitted? and the right shift should be splitted, right? Sorry if this had been already answered.Yes.
MOQ 50 for each colour.Which colours will you be offering in the end? Orange and Black?
MOQ 50 for each colour.Which colours will you be offering in the end? Orange and Black?
I'd be in for a orange pcb with orange plate :D
White plates available?Ill see what I can do
I would be all over white plates! I'd buy more than one for sure!White plates available?Ill see what I can do
White plates available?Ill see what I can do
Will get one of each then.Which colours will you be offering in the end? Orange and Black?Yes.
You mentioned that CF plates would be included but I'm not seeing them. Are you still planning on that?
Does the plate allow for the removal of switch tops?It does.
What is going to be the ETA for these once the GB is over and invoiced?If I get them out within two months after payment, I am pretty happy.
What is going to be the ETA for these once the GB is over and invoiced?If I get them out within two months after payment, I am pretty happy.
Does the plate allow for the removal of switch tops?It does.
They do. They use the second cutout shown here (http://builder.swillkb.com/) (t:2), which allows to remove the top casing of the switch.Does the plate allow for the removal of switch tops?It does.
But they don't have the cutouts ... or am I wrong?
Pre Order is closed right?
I filled out the form in the IC channel. So I will be contacted if the GP starts?
Just don't want to miss it...
Will gold springs be offered?
Just picked up a gh60 pcb a nice plate to go with it would be awesome. /wait mode activated
I would really appericate if the EU guys here could do a little research on SEPA.What kind of research?
I would really appericate if the EU guys here could do a little research on SEPA. I want to minimize the trouble with PayPal. Thanks.
I would really appericate if the EU guys here could do a little research on SEPA. I want to minimize the trouble with PayPal. Thanks.I usually prefer to pay by SEPA when available, mostly because I dislike PP as a company. But with that said SEPA does cost me 10 SEK (~= 10 NOK) per transaction, and while it's not much is more than PP zero fees for the buyer.
I add 4% for PayPal transactions and 2,19 for SEPA. I am thinking about removing the SEPA fee to encourage SEPA.I would really appericate if the EU guys here could do a little research on SEPA. I want to minimize the trouble with PayPal. Thanks.I usually prefer to pay by SEPA when available, mostly because I dislike PP as a company. But with that said SEPA does cost me 10 SEK (~= 10 NOK) per transaction, and while it's not much is more than PP zero fees for the buyer.
I don't need to know anything, I just want you guys to know about it.I would really appericate if the EU guys here could do a little research on SEPA. I want to minimize the trouble with PayPal. Thanks.
What do you want to know about SEPA?
How you do it with your bank. I just want people to know about SEPA beforehand.I would really appericate if the EU guys here could do a little research on SEPA.What kind of research?
How you do it with your bank. I just want people to know about SEPA beforehand.Online banking. I just fill the form and issue the payment.
I know. I can live with the delay, there is a delay for me to get money from PayPal anyway.How you do it with your bank. I just want people to know about SEPA beforehand.Online banking. I just fill the form and issue the payment.
It's as simple as PayPal and has lower fees.
The only downside, for you, is that PayPal is instant, while SEPA is delayed to the first working day.
Will you have winkey plates as well?
Also, how much is shipping within Norway?
Will you have winkey plates as well?
Also, how much is shipping within Norway?
As I didn't get an answer last time, I'll try again ;)
Will steel plates be offered this time around? (ANSI)..
Great!
And curse you for being so fast and quoting me before my ninja edit to make it sound less harsh =P
Will you have winkey plates as well?
Also, how much is shipping within Norway?
40 NOK or something. I may offer free shipping in Norway.
This case from Massdrop might be a good fit for this GB: https://www.massdrop.com/buy/lambo-60-anodized-aluminum-caseIt would.
To my understanding this would fit great with what is offered here?
This case from Massdrop might be a good fit for this GB: https://www.massdrop.com/buy/lambo-60-anodized-aluminum-caseIt would.
To my understanding this would fit great with what is offered here?
It's a very nice case. Too bad shipping and customs would shred my wallet to pieces.
you won't happen to know any other aluminum cases available that isn't wallet shredding ?Aluminum is always harsh on the wallet but you try your luck with Pexon (http://pexonpcs.co.uk/products/60-silver-cnc-aluminium-case?variant=899015271) or our beloved China (http://www.aliexpress.com/item/Wholesales-GH60-Anodizing-Aluminum-Case-for-60-Mechanical-Gaming-Keyboard-Compatible-Poker2-Pok3r-Faceu-60/32540926035.html?spm=2114.01010208.3.1.2foeMj&ws_ab_test=searchweb201556_6,searchweb201644_4_505_506_503_504_301_10032_10020_502_10001_10002_10017_10005_10006_10003_10021_10004_10022_10018_10019,searchweb201560_9,searchweb1451318400_-1,searchweb1451318411_-1&btsid=0cbd720b-baaa-4d38-a090-640a5e84420c).
you won't happen to know any other aluminum cases available that isn't wallet shredding ?Aluminum is always harsh on the wallet but you try your luck with Pexon (http://pexonpcs.co.uk/products/60-silver-cnc-aluminium-case?variant=899015271) or our beloved China (http://www.aliexpress.com/item/Wholesales-GH60-Anodizing-Aluminum-Case-for-60-Mechanical-Gaming-Keyboard-Compatible-Poker2-Pok3r-Faceu-60/32540926035.html?spm=2114.01010208.3.1.2foeMj&ws_ab_test=searchweb201556_6,searchweb201644_4_505_506_503_504_301_10032_10020_502_10001_10002_10017_10005_10006_10003_10021_10004_10022_10018_10019,searchweb201560_9,searchweb1451318400_-1,searchweb1451318411_-1&btsid=0cbd720b-baaa-4d38-a090-640a5e84420c).
How is it to order from Ali ? reliable? any unexpected fees or customs ?Good, if you have patience. It usually takes three weeks for me, including custom clearance.
you won't happen to know any other aluminum cases available that isn't wallet shredding ?Aluminum is always harsh on the wallet but you try your luck with Pexon (http://pexonpcs.co.uk/products/60-silver-cnc-aluminium-case?variant=899015271) or our beloved China (http://www.aliexpress.com/item/Wholesales-GH60-Anodizing-Aluminum-Case-for-60-Mechanical-Gaming-Keyboard-Compatible-Poker2-Pok3r-Faceu-60/32540926035.html?spm=2114.01010208.3.1.2foeMj&ws_ab_test=searchweb201556_6,searchweb201644_4_505_506_503_504_301_10032_10020_502_10001_10002_10017_10005_10006_10003_10021_10004_10022_10018_10019,searchweb201560_9,searchweb1451318400_-1,searchweb1451318411_-1&btsid=0cbd720b-baaa-4d38-a090-640a5e84420c).
Does the plate support plate mounted switches?Either plate and PCB mounted.
And what about stabilizers?Cherry PCB mounted only.
Is the plate made for switch top removal?Yes.
How is it to order from Ali ? reliable? any unexpected fees or customs ?Good, if you have patience. It usually takes three weeks for me, including custom clearance.
Sellers are willing to declare goods with lower values, so you usually don't pay any customs fees.
you won't happen to know any other aluminum cases available that isn't wallet shredding ?Aluminum is always harsh on the wallet but you try your luck with Pexon (http://pexonpcs.co.uk/products/60-silver-cnc-aluminium-case?variant=899015271) or our beloved China (http://www.aliexpress.com/item/Wholesales-GH60-Anodizing-Aluminum-Case-for-60-Mechanical-Gaming-Keyboard-Compatible-Poker2-Pok3r-Faceu-60/32540926035.html?spm=2114.01010208.3.1.2foeMj&ws_ab_test=searchweb201556_6,searchweb201644_4_505_506_503_504_301_10032_10020_502_10001_10002_10017_10005_10006_10003_10021_10004_10022_10018_10019,searchweb201560_9,searchweb1451318400_-1,searchweb1451318411_-1&btsid=0cbd720b-baaa-4d38-a090-640a5e84420c).
I think MechSupply (UKKeycaps) did a group buy of the last one (http://www.mechsupply.co.uk/product/aluminium-60-case) a while ago, looks very similar at least.
EDIT: What I mean, is that perhaps UKKeycaps got some extras. So you could check with them first, as they seem to based out of UK too.
So HHKB has no ISO Left shift? Pity.Show Image(http://images.tapatalk-cdn.com/16/03/08/11032ef6fb0e8bcbcf10dad9f676bfa8.jpg)Show Image(http://images.tapatalk-cdn.com/16/03/08/7c36a0ed7f97320a44dbc9205818f2d3.jpg)
Shipping this week sometime to me.
My pleasure good sir.How is it to order from Ali ? reliable? any unexpected fees or customs ?Good, if you have patience. It usually takes three weeks for me, including custom clearance.
Sellers are willing to declare goods with lower values, so you usually don't pay any customs fees.
Thank you very much for your answers TalkingTree :) appreciate it!
Ahh, that would be my dream layout.So HHKB has no ISO Left shift? Pity.Show Image(http://images.tapatalk-cdn.com/16/03/08/11032ef6fb0e8bcbcf10dad9f676bfa8.jpg)Show Image(http://images.tapatalk-cdn.com/16/03/08/7c36a0ed7f97320a44dbc9205818f2d3.jpg)
Shipping this week sometime to me.
I haven't thought about it before actually, But I'm inclined to agree that it would be an awesome layout, best HHKB/ISO compromise i can think of.Ahh, that would be my dream layout.So HHKB has no ISO Left shift? Pity.Show Image(http://images.tapatalk-cdn.com/16/03/08/11032ef6fb0e8bcbcf10dad9f676bfa8.jpg)Show Image(http://images.tapatalk-cdn.com/16/03/08/7c36a0ed7f97320a44dbc9205818f2d3.jpg)
Shipping this week sometime to me.
Yep, 60% keyboard with extra keys in strategical spots.I haven't thought about it before actually, But I'm inclined to agree that it would be an awesome layout, best HHKB/ISO compromise i can think of.Ahh, that would be my dream layout.So HHKB has no ISO Left shift? Pity.Show Image(http://images.tapatalk-cdn.com/16/03/08/11032ef6fb0e8bcbcf10dad9f676bfa8.jpg)Show Image(http://images.tapatalk-cdn.com/16/03/08/7c36a0ed7f97320a44dbc9205818f2d3.jpg)
Shipping this week sometime to me.
Yep, 60% keyboard with extra keys in strategical spots.I haven't thought about it before actually, But I'm inclined to agree that it would be an awesome layout, best HHKB/ISO compromise i can think of.Ahh, that would be my dream layout.So HHKB has no ISO Left shift? Pity.Show Image(http://images.tapatalk-cdn.com/16/03/08/11032ef6fb0e8bcbcf10dad9f676bfa8.jpg)Show Image(http://images.tapatalk-cdn.com/16/03/08/7c36a0ed7f97320a44dbc9205818f2d3.jpg)
Shipping this week sometime to me.
I can reach the both enter keys with the pinky but I do prefer the ANSI enter because I can map the pipe to backslash, which is extremely handy. As for the ISO left shift, I'm used to it and I do prefer it because the ISO key to its right is for the angled brackets in my native layout; a key I do use.Yep, 60% keyboard with extra keys in strategical spots.I haven't thought about it before actually, But I'm inclined to agree that it would be an awesome layout, best HHKB/ISO compromise i can think of.Ahh, that would be my dream layout.So HHKB has no ISO Left shift? Pity.Show Image(http://images.tapatalk-cdn.com/16/03/08/11032ef6fb0e8bcbcf10dad9f676bfa8.jpg)Show Image(http://images.tapatalk-cdn.com/16/03/08/7c36a0ed7f97320a44dbc9205818f2d3.jpg)
Shipping this week sometime to me.
It is true that the ISO layout has a couple more one unit keys; but, the question is if those are really functional or if they were included just out of need, while I can use both, because I write in Spanish, as well, I can use US-International with no problems, and even some advantages, the left shift is larger than in ISO, the last being almost unusable, and to use the ISO enter you right hand should move out of the home row, while the ANSI enter can be reached with your pinky.
Same here, ISO us only one key more than an ANSI (the one besides the short shift), and HHKB does have an extra key from splitting the 2U backspace, but that would move gt/lt/pipe to the other corner of the keyboard, and I do use that key rather often.It is true that the ISO layout has a couple more one unit keys; but, the question is if those are really functional or if they were included just out of need, while I can use both, because I write in Spanish, as well, I can use US-International with no problems, and even some advantages, the left shift is larger than in ISO, the last being almost unusable, and to use the ISO enter you right hand should move out of the home row, while the ANSI enter can be reached with your pinky.I can reach the both enter keys with the pinky but I do prefer the ANSI enter because I can map the pipe to backslash, which is extremely handy. As for the ISO left shift, I'm used to it and I do prefer it because the ISO key to its right is for the angled brackets in my native layout; a key I do use.
So HHKB has no ISO Left shift? Pity.Show Image(http://images.tapatalk-cdn.com/16/03/08/11032ef6fb0e8bcbcf10dad9f676bfa8.jpg)Show Image(http://images.tapatalk-cdn.com/16/03/08/7c36a0ed7f97320a44dbc9205818f2d3.jpg)
Shipping this week sometime to me.
So HHKB has no ISO Left shift? Pity.Show Image(http://images.tapatalk-cdn.com/16/03/08/11032ef6fb0e8bcbcf10dad9f676bfa8.jpg)Show Image(http://images.tapatalk-cdn.com/16/03/08/7c36a0ed7f97320a44dbc9205818f2d3.jpg)
Shipping this week sometime to me.
I thought about offering a ISO HHKB plate, but I don't think there is enough interest. An HHKB plate with ISO shift cutouts instead of ANSI shift cutouts will not be offered.
I might look into having it added to the ANSI design since we are using PCB mounted stabilisers anywa, however, i really want to minimize the cutout on these plates.
So HHKB has no ISO Left shift? Pity.Show Image(http://images.tapatalk-cdn.com/16/03/08/11032ef6fb0e8bcbcf10dad9f676bfa8.jpg)Show Image(http://images.tapatalk-cdn.com/16/03/08/7c36a0ed7f97320a44dbc9205818f2d3.jpg)
Shipping this week sometime to me.
I thought about offering a ISO HHKB plate, but I don't think there is enough interest. An HHKB plate with ISO shift cutouts instead of ANSI shift cutouts will not be offered.
I might look into having it added to the ANSI design since we are using PCB mounted stabilisers anywa, however, i really want to minimize the cutout on these plates.
It would be great if you get it added to the ANSI HHKB plate, that would make it a very versatile plate, no one can let it to pass.
Show Image(http://i.imgur.com/2MSfvfb.png)
:) Let me know if you have any questions.
TLDR: this will not cost you anything more. just good news.
It would be great if you get it added to the ANSI HHKB plate, that would make it a very versatile plate, no one can let it to pass.I do agree with ideus. An extra cutout for split left shift won't bother any ANSI user but would make a lot of ISOers happy.
It would be great if you get it added to the ANSI HHKB plate, that would make it a very versatile plate, no one can let it to pass.I do agree with ideus. An extra cutout for split left shift won't bother any ANSI user but would make a lot of ISOers happy.
Also, news on white plate? :)
Should just add support for 2.75u shift also then? The problem is that i can't order another set of samples, so i have to trust pure designs.Not sure, after all the short right shift is a distinguishable feature of the HHKB. Maybe you should. I don't think it's so risky to go untested.
Also, news on white plate? :)
90% sure there will be a white Universal60 plate.
I have to limit colours on the proprietary plates. Sorry. Only on universal60.Also, news on white plate? :)
90% sure there will be a white Universal60 plate.
Awesome, but not for HHKB?
I have to limit colours on the proprietary plates. Sorry. Only on universal60.Also, news on white plate? :)
90% sure there will be a white Universal60 plate.
Awesome, but not for HHKB?
I'll probably add it to both plates and verify the design with JD.Should just add support for 2.75u shift also then? The problem is that i can't order another set of samples, so i have to trust pure designs.Not sure, after all the short right shift is a distinguishable feature of the HHKB. Maybe you should. I don't think it's so risky to go untested.
Looking forward to it.I'll probably add it to both plates and verify the design with JD.Should just add support for 2.75u shift also then? The problem is that i can't order another set of samples, so i have to trust pure designs.Not sure, after all the short right shift is a distinguishable feature of the HHKB. Maybe you should. I don't think it's so risky to go untested.
It would be great if you get it added to the ANSI HHKB plate, that would make it a very versatile plate, no one can let it to pass.I do agree with ideus. An extra cutout for split left shift won't bother any ANSI user but would make a lot of ISOers happy.
Should just add support for 2.75u shift also then? The problem is that i can't order another set of samples, so i have to trust pure designs.
Working on it.It would be great if you get it added to the ANSI HHKB plate, that would make it a very versatile plate, no one can let it to pass.I do agree with ideus. An extra cutout for split left shift won't bother any ANSI user but would make a lot of ISOers happy.
Should just add support for 2.75u shift also then? The problem is that i can't order another set of samples, so i have to trust pure designs.
If you add the versatility of ISO plus splitted or full right shift to the HHKB plate it will be unique; as far as I know, it would be the only one with all those options, plus the cut outs to open the switches. It would rock.
Working on it.It would be great if you get it added to the ANSI HHKB plate, that would make it a very versatile plate, no one can let it to pass.I do agree with ideus. An extra cutout for split left shift won't bother any ANSI user but would make a lot of ISOers happy.
Should just add support for 2.75u shift also then? The problem is that i can't order another set of samples, so i have to trust pure designs.
If you add the versatility of ISO plus splitted or full right shift to the HHKB plate it will be unique; as far as I know, it would be the only one with all those options, plus the cut outs to open the switches. It would rock.
So when is the official start to the group buy? Or is it already going on?
Sorry, still pretty new to this whole mechanical keyboard group buy game.
One dumb question, is it possible to mount RGB LED SMD under the PCB ??Bumping my question
I've found some 1206 (3227) RGB LED on Ali, but they aren't 1206 (3516) available on GON's store :
http://fr.aliexpress.com/item/100pcs-SMD-LED-1206-3227-Common-Anode-RGB-Tricolor-Ultra-Bright-Chip-Light-Emitting-Diode-LED/32602322649.html?ws_ab_test=searchweb201556_9,searchweb201644_2_505_506_503_504_10020_502_10001_10002_10017_10005_10006_10021_10003_10004_10022_10018_10019,searchweb201560_2,searchweb1451318400_-1,searchweb1451318411_-1&btsid=0b2f807f-288b-4ac4-8b4e-c375bd4997b9 (http://fr.aliexpress.com/item/100pcs-SMD-LED-1206-3227-Common-Anode-RGB-Tricolor-Ultra-Bright-Chip-Light-Emitting-Diode-LED/32602322649.html?ws_ab_test=searchweb201556_9,searchweb201644_2_505_506_503_504_10020_502_10001_10002_10017_10005_10006_10021_10003_10004_10022_10018_10019,searchweb201560_2,searchweb1451318400_-1,searchweb1451318411_-1&btsid=0b2f807f-288b-4ac4-8b4e-c375bd4997b9)
is it possible to mount RGB LED SMD under the PCB ??Looks like it. But I'm not 100% sure.
is it possible to mount RGB LED SMD under the PCB ??Looks like it. But I'm not 100% sure.
This might be an aftermarket work.Show Image(https://geekhack.org/index.php?action=dlattach;topic=64369.0;attach=82091;image)
(source (https://geekhack.org/index.php?topic=64369.msg1539657#msg1539657))
It's available on the PCB, but SMD LEDs will not be an option to buy.is it possible to mount RGB LED SMD under the PCB ??Looks like it. But I'm not 100% sure.
This might be an aftermarket work.Show Image(https://geekhack.org/index.php?action=dlattach;topic=64369.0;attach=82091;image)
(source (https://geekhack.org/index.php?topic=64369.msg1539657#msg1539657))
That is a feature of the GON Nerd 60 that the OP may include in this buy, but you should solder your own SMD LEDs, it is not that hard.
It's available on the PCB, but SMD LEDs will not be an option to buy.is it possible to mount RGB LED SMD under the PCB ??Looks like it. But I'm not 100% sure.
This might be an aftermarket work.Show Image(https://geekhack.org/index.php?action=dlattach;topic=64369.0;attach=82091;image)
(source (https://geekhack.org/index.php?topic=64369.msg1539657#msg1539657))
That is a feature of the GON Nerd 60 that the OP may include in this buy, but you should solder your own SMD LEDs, it is not that hard.
It's available on the PCB, but SMD LEDs will not be an option to buy.is it possible to mount RGB LED SMD under the PCB ??Looks like it. But I'm not 100% sure.
This might be an aftermarket work.Show Image(https://geekhack.org/index.php?action=dlattach;topic=64369.0;attach=82091;image)
(source (https://geekhack.org/index.php?topic=64369.msg1539657#msg1539657))
That is a feature of the GON Nerd 60 that the OP may include in this buy, but you should solder your own SMD LEDs, it is not that hard.
An SMD LED I soldered on my own Nerd60, it is one of the best PCBs available.Show Image(http://i.imgur.com/m67nbm7.jpg)
Thank you Guys for answering, I'll be ordering those SMD RG 1206 LED.It's available on the PCB, but SMD LEDs will not be an option to buy.is it possible to mount RGB LED SMD under the PCB ??Looks like it. But I'm not 100% sure.
This might be an aftermarket work.Show Image(https://geekhack.org/index.php?action=dlattach;topic=64369.0;attach=82091;image)
(source (https://geekhack.org/index.php?topic=64369.msg1539657#msg1539657))
That is a feature of the GON Nerd 60 that the OP may include in this buy, but you should solder your own SMD LEDs, it is not that hard.
An SMD LED I soldered on my own Nerd60, it is one of the best PCBs available.Show Image(http://i.imgur.com/m67nbm7.jpg)
Very clean soldering job. I would be myself scared of burning the LED part.
Resistors for inswitch LEDs will be presoldered.Thank you Guys for answering, I'll be ordering those SMD RG 1206 LED.It's available on the PCB, but SMD LEDs will not be an option to buy.is it possible to mount RGB LED SMD under the PCB ??Looks like it. But I'm not 100% sure.
This might be an aftermarket work.Show Image(https://geekhack.org/index.php?action=dlattach;topic=64369.0;attach=82091;image)
(source (https://geekhack.org/index.php?topic=64369.msg1539657#msg1539657))
That is a feature of the GON Nerd 60 that the OP may include in this buy, but you should solder your own SMD LEDs, it is not that hard.
An SMD LED I soldered on my own Nerd60, it is one of the best PCBs available.Show Image(http://i.imgur.com/m67nbm7.jpg)
Very clean soldering job. I would be myself scared of burning the LED part.
You will need resistors as well, each LED requires one resistor.
Resistors for inswitch LEDs will be presoldered.Thank you Guys for answering, I'll be ordering those SMD RG 1206 LED.It's available on the PCB, but SMD LEDs will not be an option to buy.is it possible to mount RGB LED SMD under the PCB ??Looks like it. But I'm not 100% sure.
This might be an aftermarket work.Show Image(https://geekhack.org/index.php?action=dlattach;topic=64369.0;attach=82091;image)
(source (https://geekhack.org/index.php?topic=64369.msg1539657#msg1539657))
That is a feature of the GON Nerd 60 that the OP may include in this buy, but you should solder your own SMD LEDs, it is not that hard.
An SMD LED I soldered on my own Nerd60, it is one of the best PCBs available.Show Image(http://i.imgur.com/m67nbm7.jpg)
Very clean soldering job. I would be myself scared of burning the LED part.
You will need resistors as well, each LED requires one resistor.
I believe they use the same resistors.(http://images.tapatalk-cdn.com/16/03/10/2471740556e3b4cf965929778be0e5c5.jpg)Resistors for inswitch LEDs will be presoldered.Thank you Guys for answering, I'll be ordering those SMD RG 1206 LED.It's available on the PCB, but SMD LEDs will not be an option to buy.is it possible to mount RGB LED SMD under the PCB ??Looks like it. But I'm not 100% sure.
This might be an aftermarket work.Show Image(https://geekhack.org/index.php?action=dlattach;topic=64369.0;attach=82091;image)
(source (https://geekhack.org/index.php?topic=64369.msg1539657#msg1539657))
That is a feature of the GON Nerd 60 that the OP may include in this buy, but you should solder your own SMD LEDs, it is not that hard.
An SMD LED I soldered on my own Nerd60, it is one of the best PCBs available.Show Image(http://i.imgur.com/m67nbm7.jpg)
Very clean soldering job. I would be myself scared of burning the LED part.
You will need resistors as well, each LED requires one resistor.
Thank you, still, SMD LEDs will need their resistors, are those ones be pre-soldered as well?
Is this groupbuy live, or have I missed it? Read every post and can't see if i'm too late or not. :-\Those preorders were removed. I am merging this with my other GB.
I'm having trouble remembering if I joined the preorder for a plate back in February either.
The two GON Nerd60 I have use two types of resistors, both are SMD, but there are resistors for in-switch LEDs and other for SMD LEDs, I think he will install both types, which is great. In any case, if some are missing they can always be soldered later.
The two GON Nerd60 I have use two types of resistors, both are SMD, but there are resistors for in-switch LEDs and other for SMD LEDs, I think he will install both types, which is great. In any case, if some are missing they can always be soldered later.
Yeah, the resistors for in-switch and SMD LEDs have been different whenever I've ordered Gon's PCBs. I'm planning on using SMD LEDs on the top and bottom, does anyone know if I'll need to do anything special with the resistors?
Thanks to 3K for doing artwork for me !Cool. Nice one.Show Image(http://images.tapatalk-cdn.com/16/03/12/7e03739996e87c33ccba1760192a059b.jpg)
Whats the price going to be around for the universal plates?30 American dinars
Show Image(http://images.tapatalk-cdn.com/16/03/14/894ff77dd70c90691670a1cbf690257d.jpg)Show Image(http://images.tapatalk-cdn.com/16/03/14/b606809a9e46124b51cab8c156d3a0df.jpg)
Would love to do it today, but the Google form is time consuming.Show Image(http://images.tapatalk-cdn.com/16/03/14/894ff77dd70c90691670a1cbf690257d.jpg)Show Image(http://images.tapatalk-cdn.com/16/03/14/b606809a9e46124b51cab8c156d3a0df.jpg)
Great! when are you planning to open the GB's orders?
How much will the PCB's cost? I don't see a price on the google form.
Hmm. No steel HHKB (or WKL) plates, I will have to think another round before joining in... is there any end date set yet?3 weeks from now. Subject to change.
How much will the PCB's cost? I don't see a price on the google form.
Updated ! They cost 60$ presoldered with diodes and resistors.
Submitted! Any way to go back and change the shipping method once I submit the form? I originally chose USA tracked, but I'm having second thoughts about the enormous price difference between that and untracked. >.>
Any idea when the GB will end?
Hmm. No steel HHKB (or WKL) plates, I will have to think another round before joining in... is there any end date set yet?3 weeks from now. Subject to change.
I need to be very careful so I reach MOQ one everything.
Any idea when the GB will end?
Yeah I will go ahead and change it for you.
I guess this round is gonna cost me a lot. I ordered three plates and three PCBs among a few other things.
As always, thanks LeandreN for making this happen.
Great. Thanks for that as well.I guess this round is gonna cost me a lot. I ordered three plates and three PCBs among a few other things.
As always, thanks LeandreN for making this happen.
Thanks for ordering. I have 50 Gateron Blues I can sell you. I will add it to the order at .2 each.
BTW, when ordering universal plates, you're asked twice about Black ones. You might want to dump one.
Joined the GB: 2 orange pcb's, 2 orange universal plates, 2 6.25 stabiliser sets and a little donation for the fight against cancer. Great idea to combine this GB with charity work.Thanks a lot!
LeandreN, can you show the numbers of PCB orders in the chart?Working on it. 20 total now.
We'll get an idea about the MOQ.
So, 80 away. Good start.LeandreN, can you show the numbers of PCB orders in the chart?Working on it. 20 total now.
We'll get an idea about the MOQ.
LeandreN, is there a way to confirm what I ordered, I did it on mobile earlier and I think I may have forgotten to add something. Thanks for the help.I got your order :)
Just entered, for :4x 2u stabilisers are included in each stabiliser package.
- 2 PCBs Orange and Black
- 1 HHKB Silver Plate
- 1 Normal white plate (Steel if MOQ not reached)
- 2 Stabs 6.25
Is there grab some 2u stabs ?
@LeandreN: Which lube do you use for stabiliser and where can i source it in EU?I got some from SPRiT a looong time ago. I have no source in the EU. Sorry.
LeandreN, can you show the numbers of PCB orders in the chart?
We'll get an idea about the MOQ.
What colors will be available for the happy plate?The orders are open.
Lovely.LeandreN, can you show the numbers of PCB orders in the chart?Added!
We'll get an idea about the MOQ.
I will update here in that case. I would really like to hit MOQ on both. I also have to put my own order in at the end :)Lovely.LeandreN, can you show the numbers of PCB orders in the chart?Added!
We'll get an idea about the MOQ.
I don't dare to jinx, but what if the unthinkable happens?
If we don't meet the MOQ with one PCB color, will you automatically shift to the other color?
What colors will be available for the happy plate?Black, blue, orange, red and silver.
What colors will be available for the happy plate?The orders are open.
I think we have 4 or 5 colours available. The best is to check the ordering form, as I can't remember.
I would really like to hit MOQ on both.Indeed, especially since there's the logo on the silkscreen.
I also have to put my own order in at the end :)Sounds like a massive order.
4x 2u stabilisers are included in each stabiliser package.
Are the cf plates +35 or +45? The form says 30+35=75. It's possible that I'm an idiot or missing something though.The base price of plates are 30. And they are supposed to be +45 to make a total of 75.
Are the cf plates +35 or +45? The form says 30+35=75. It's possible that I'm an idiot or missing something though.The base price of plates are 30. And they are supposed to be +45 to make a total of 75.
I will have to edit the form.
Very nice, I put in for a couple of plates and some stabalizer sets, really nice that these ship within the EU for a change :D nice one LeandrenThanks :)
these look like they support alps switches but just wanted to double check, do they?I guess not, 1u cutouts would but Cherry PCB stabilizers' wouldn't.
these look like they support alps switches but just wanted to double check, do they?
I tried sifting through some of the pages but couldn't come to a conclusion. Are the HHKB plates steel?
-Thanks!
Are there any recommendations for keyboard case to match with orange plate?
I don't know if my order submitted or not. I hit submit or whatever it is at the very end but my internet likes to cut in and out and after that it just gave me a blank page. I guess we'll see in a little bit. Just a simple order for black HHKB, black PCB, and a stab.Got your order :)
is shipping $7-35 based on where i am in us or is it $35? not sure how the range is calculated, and living in the continental united states has spoiled me in terms of shipping costs.Around 15$ to the states for one kit.
I tried sifting through some of the pages but couldn't come to a conclusion. Are the HHKB plates steel?Only aluminium
-Thanks!
Put in my order. One of each color PCB!
Would these work with GONs bluetooth option (http://www.gonskeyboardworks.com/pcbs-and-controllers/119-bluetooth-option-set-for-nerd.html)?
I have a question, I will be using your parts for my first keyboard build.
What else should I need?
Got the following in the mail/groupbuy etc:
- PCB & plate & stabs from this buy
- Switches
- switch leds
Can I add the switches just like that to the pcb?
Or will I need some extra parts?
I have a question, I will be using your parts for my first keyboard build.
What else should I need?
Got the following in the mail/groupbuy etc:
- PCB & plate & stabs from this buy
- Switches
- switch leds
Can I add the switches just like that to the pcb?
Or will I need some extra parts?
Case and keycaps :cool: AFAIK diodes/resistors are presoldered but you should check
I have a question, I will be using your parts for my first keyboard build.
What else should I need?
Got the following in the mail/groupbuy etc:
- PCB & plate & stabs from this buy
- Switches
- switch leds
Can I add the switches just like that to the pcb?
Or will I need some extra parts?
Case and keycaps :cool: AFAIK diodes/resistors are presoldered but you should check
Thanks for the quick response :)
I have a question, I will be using your parts for my first keyboard build.
What else should I need?
Got the following in the mail/groupbuy etc:
- PCB & plate & stabs from this buy
- Switches
- switch leds
Can I add the switches just like that to the pcb?
Or will I need some extra parts?
Case and keycaps :cool: AFAIK diodes/resistors are presoldered but you should check
Thanks for the quick response :)
They do come presoldered so you're good. The PCB is like a Poker so it'll fit any standard 60% case, depending on your layout keycaps shouldn't be an issue.
I have a question, I will be using your parts for my first keyboard build.
What else should I need?
Got the following in the mail/groupbuy etc:
- PCB & plate & stabs from this buy
- Switches
- switch leds
Can I add the switches just like that to the pcb?
Or will I need some extra parts?
Case and keycaps :cool: AFAIK diodes/resistors are presoldered but you should check
Thanks for the quick response :)
They do come presoldered so you're good. The PCB is like a Poker so it'll fit any standard 60% case, depending on your layout keycaps shouldn't be an issue.
Will I be needing a controller (teensy?) or is that included as well? :)
I have a question, I will be using your parts for my first keyboard build.
What else should I need?
Got the following in the mail/groupbuy etc:
- PCB & plate & stabs from this buy
- Switches
- switch leds
Can I add the switches just like that to the pcb?
Or will I need some extra parts?
Case and keycaps :cool: AFAIK diodes/resistors are presoldered but you should check
Thanks for the quick response :)
They do come presoldered so you're good. The PCB is like a Poker so it'll fit any standard 60% case, depending on your layout keycaps shouldn't be an issue.
Will I be needing a controller (teensy?) or is that included as well? :)
Controller is also presoldered, mb
the massdrop case wouldn't look nice with the hhkb plate right?
Corners would look weird
the massdrop case wouldn't look nice with the hhkb plate right?
Corners would look weird
I was looking at the Tex 60% aluminum cases: https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=629
I have a blue one for my Danger Zone set and it looks really nice. It is pretty much a flat bottom case, so really uncomfortable to type with unless you have a good wrist rest.
The HHKB plates are : covered 1.5u - 1u - 1.5u - 7u - 1.5u - 1u - covered 1.5u
1.75u + 1u or 2.75u shift on the right side.
ANSI only.
Covered means you can't put a switch there.
Yes.The HHKB plates are : covered 1.5u - 1u - 1.5u - 7u - 1.5u - 1u - covered 1.5u
1.75u + 1u or 2.75u shift on the right side.
ANSI only.
Covered means you can't put a switch there.
I think you meant 1u - 1.5u - 7u - 1.5u - 1u for HHKB plates?
Just want to make sure that I'm reading it right..
Ordered orange pcb and orange plate. Anyone know how can I get orange aluminium case that will match this pcb and plates?The TEX aluminium case in orange will fit the plate pretty good.
Ordered orange pcb and orange plate. Anyone know how can I get orange aluminium case that will match this pcb and plates?The TEX aluminium case in orange will fit the plate pretty good.
the massdrop case wouldn't look nice with the hhkb plate right?
Corners would look weird
I was looking at the Tex 60% aluminum cases: https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=629
I have a blue one for my Danger Zone set and it looks really nice. It is pretty much a flat bottom case, so really uncomfortable to type with unless you have a good wrist rest.
I like having an angled case
Ordered orange pcb and orange plate. Anyone know how can I get orange aluminium case that will match this pcb and plates?The TEX aluminium case in orange will fit the plate pretty good.
the massdrop case wouldn't look nice with the hhkb plate right?
Corners would look weird
I was looking at the Tex 60% aluminum cases: https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=629
I have a blue one for my Danger Zone set and it looks really nice. It is pretty much a flat bottom case, so really uncomfortable to type with unless you have a good wrist rest.
I like having an angled case
Tex aluminum cases can come with feet to angle it, so that won't be a concern.
Do you know where to buy the feet? I have not seen them listed anywhere to purchase.
Hello, what is the advantage to prefer SEPA over Paypal for the Europeans ?
This case (http://www.aliexpress.com/item/GH60-compact-mechanical-keyboard-anodized-alluminum-case-poker2-golden-case-gaming-keyboard-FACEU-keyboard-metal-case/32573909218.html?spm=2114.30010308.3.47.KCwrdD&ws_ab_test=searchweb201556_6,searchweb201602_1_505_506_503_504_10034_10032_10020_502_10001_10002_10017_10010_10005_10006_10011_10003_10021_10004_10022_10009_10008_10018_10019,searchweb201603_9&btsid=0ca8005b-741c-403f-94f2-1e36a9d70f78) isn't available in orange but it's a flat, aluminum 60% case with matching feet, should do you guys good.
the massdrop case wouldn't look nice with the hhkb plate right?
Corners would look weird
I was looking at the Tex 60% aluminum cases: https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=629
I have a blue one for my Danger Zone set and it looks really nice. It is pretty much a flat bottom case, so really uncomfortable to type with unless you have a good wrist rest.
I like having an angled case
Tex aluminum cases can come with feet to angle it, so that won't be a concern.
Do you know where to buy the feet? I have not seen them listed anywhere to purchase.
Submitted!
Can the HHKB plate be used for a standard layout except for the bottom row, I mean standard backspace, standard right shift, just the HHKB style bottom row?
Or is it true HHKB layout only?
Also, do the plates (HHKB and Universal) feature switch top removal?
And is it correct, that I have to fill in zeros on everything I don't want to buy?
Hello, what is the advantage to prefer SEPA over Paypal for the Europeans ?
SEPA payments =
(advantage) Not paying the 4% that will be added on to your order to cover PayPal transaction fees
+
(disadvantage) Losing Paypal's buyer protection
I can't tell for I don't own one.This case (http://www.aliexpress.com/item/GH60-compact-mechanical-keyboard-anodized-alluminum-case-poker2-golden-case-gaming-keyboard-FACEU-keyboard-metal-case/32573909218.html?spm=2114.30010308.3.47.KCwrdD&ws_ab_test=searchweb201556_6,searchweb201602_1_505_506_503_504_10034_10032_10020_502_10001_10002_10017_10010_10005_10006_10011_10003_10021_10004_10022_10009_10008_10018_10019,searchweb201603_9&btsid=0ca8005b-741c-403f-94f2-1e36a9d70f78) isn't available in orange but it's a flat, aluminum 60% case with matching feet, should do you guys good.
How is the quality on those? I have seen some of those CNC cases be pretty poor quality.
We are about 50% MOQ on the PCBs after 24 hours. Now is the time to bring all your friends onboard this GB!
Plate moq will be reached, bug I might add a counter for fun.We are about 50% MOQ on the PCBs after 24 hours. Now is the time to bring all your friends onboard this GB!
What about plates?
A counter would be handy.
Awesome, thank you! You're the man.I don't know if my order submitted or not. I hit submit or whatever it is at the very end but my internet likes to cut in and out and after that it just gave me a blank page. I guess we'll see in a little bit. Just a simple order for black HHKB, black PCB, and a stab.Got your order :)
Sorry for being picky* but, in the PCB counter, would you change the second column to black to match the PCB color?Plate moq will be reached, bug I might add a counter for fun.We are about 50% MOQ on the PCBs after 24 hours. Now is the time to bring all your friends onboard this GB!
What about plates?
A counter would be handy.
Sorry for being picky* but, in the PCB counter, would you change the second column to black to match the PCB color?Plate moq will be reached, bug I might add a counter for fun.We are about 50% MOQ on the PCBs after 24 hours. Now is the time to bring all your friends onboard this GB!
What about plates?
A counter would be handy.
* pain in the backside
Good looking. :thumb:Sorry for being picky* but, in the PCB counter, would you change the second column to black to match the PCB color?Plate moq will be reached, bug I might add a counter for fun.We are about 50% MOQ on the PCBs after 24 hours. Now is the time to bring all your friends onboard this GB!
What about plates?
A counter would be handy.
* pain in the backside
Merged both.
Well my friends and family think I'm ****ing retarded for having keyboards as my hobby, but I'll probably order something myself.
Well my friends and family think I'm ****ing retarded for having keyboards as my hobby, but I'll probably order something myself.
LOL, I was going to say the same thing
how the hell did I forget about this and already order another nerd60 pcb
temped to sell my steel plate from GB#3 and get an HHKB plate from this buy...
Is there a benefit to HHKB layout besides looking cool? (ease of use, ergonomics... etc)
temped to sell my steel plate from GB#3 and get an HHKB plate from this buy...
Is there a benefit to HHKB layout besides looking cool? (ease of use, ergonomics... etc)
There are many threads and reviews about the HHKB already, that I think there is no need to revisit the subject here; however, there is a small piece of information that I think has not been discussed before about the layout, it has to do with the empty spaces at the bottom, they allow to have six corners instead of four, and each one is an easy to find spot that speeds up the activation of the keys located there. I have not thught on this much, but recently. I am using the layout at two boards, one at home, one at the office, and I noticed that after some weeks, the corners are very handy to speed up the activation of keys that was a bit harder to reach with the corner key caps installed. This fact may be the same for the winkey-less layout, that isolates the corners, but I prefer the aesthetics of the HHKB one. Regarding the second layer, I do not use the HHKB one but my own, using Space as FN key, so I cannot share any witness opinion on it and I do not use the backspace on top of the Enter either, I use the conventional 2u backspace at the top right corner, for the same reason I have explained, the corners are always easier to find by touch typing.
I don't see a thread on Deskthority for this. Did I miss it or else?Will do!
It might help to advertise the GB there as well.
Working on it.It would be great if you get it added to the ANSI HHKB plate, that would make it a very versatile plate, no one can let it to pass.I do agree with ideus. An extra cutout for split left shift won't bother any ANSI user but would make a lot of ISOers happy.
Should just add support for 2.75u shift also then? The problem is that i can't order another set of samples, so i have to trust pure designs.
If you add the versatility of ISO plus splitted or full right shift to the HHKB plate it will be unique; as far as I know, it would be the only one with all those options, plus the cut outs to open the switches. It would rock.
No intention of adding ISO enter support. Probably not because we don't have time to do another sample.Working on it.It would be great if you get it added to the ANSI HHKB plate, that would make it a very versatile plate, no one can let it to pass.I do agree with ideus. An extra cutout for split left shift won't bother any ANSI user but would make a lot of ISOers happy.
Should just add support for 2.75u shift also then? The problem is that i can't order another set of samples, so i have to trust pure designs.
If you add the versatility of ISO plus splitted or full right shift to the HHKB plate it will be unique; as far as I know, it would be the only one with all those options, plus the cut outs to open the switches. It would rock.
Just double checking that the happy plate will have ISO/ANSI Enter options.
No intention of adding ISO enter support. Probably not because we don't have time to do another sample.Working on it.It would be great if you get it added to the ANSI HHKB plate, that would make it a very versatile plate, no one can let it to pass.I do agree with ideus. An extra cutout for split left shift won't bother any ANSI user but would make a lot of ISOers happy.
Should just add support for 2.75u shift also then? The problem is that i can't order another set of samples, so i have to trust pure designs.
If you add the versatility of ISO plus splitted or full right shift to the HHKB plate it will be unique; as far as I know, it would be the only one with all those options, plus the cut outs to open the switches. It would rock.
Just double checking that the happy plate will have ISO/ANSI Enter options.
ISO shift support was what I was talking about.No intention of adding ISO enter support. Probably not because we don't have time to do another sample.Working on it.It would be great if you get it added to the ANSI HHKB plate, that would make it a very versatile plate, no one can let it to pass.I do agree with ideus. An extra cutout for split left shift won't bother any ANSI user but would make a lot of ISOers happy.
Should just add support for 2.75u shift also then? The problem is that i can't order another set of samples, so i have to trust pure designs.
If you add the versatility of ISO plus splitted or full right shift to the HHKB plate it will be unique; as far as I know, it would be the only one with all those options, plus the cut outs to open the switches. It would rock.
Just double checking that the happy plate will have ISO/ANSI Enter options.
I misunderstood your "Working on it" replay to my comment then; my bad, I was hoping the plate will include the cutout to allow either Enter style. :'(
ISO shift support was what I was talking about.No intention of adding ISO enter support. Probably not because we don't have time to do another sample.Working on it.It would be great if you get it added to the ANSI HHKB plate, that would make it a very versatile plate, no one can let it to pass.I do agree with ideus. An extra cutout for split left shift won't bother any ANSI user but would make a lot of ISOers happy.
Should just add support for 2.75u shift also then? The problem is that i can't order another set of samples, so i have to trust pure designs.
If you add the versatility of ISO plus splitted or full right shift to the HHKB plate it will be unique; as far as I know, it would be the only one with all those options, plus the cut outs to open the switches. It would rock.
Just double checking that the happy plate will have ISO/ANSI Enter options.
I misunderstood your "Working on it" replay to my comment then; my bad, I was hoping the plate will include the cutout to allow either Enter style. :'(
No ISO shift will work for this GB. I don't wanna risk adding an ISO enter, because that is quite complex. I am not going to do more samples.ISO shift support was what I was talking about.No intention of adding ISO enter support. Probably not because we don't have time to do another sample.Working on it.It would be great if you get it added to the ANSI HHKB plate, that would make it a very versatile plate, no one can let it to pass.I do agree with ideus. An extra cutout for split left shift won't bother any ANSI user but would make a lot of ISOers happy.
Should just add support for 2.75u shift also then? The problem is that i can't order another set of samples, so i have to trust pure designs.
If you add the versatility of ISO plus splitted or full right shift to the HHKB plate it will be unique; as far as I know, it would be the only one with all those options, plus the cut outs to open the switches. It would rock.
Just double checking that the happy plate will have ISO/ANSI Enter options.
I misunderstood your "Working on it" replay to my comment then; my bad, I was hoping the plate will include the cutout to allow either Enter style. :'(
I see, so you meant working on it for future versions of the plate?
Do you have a color sample of the blue plate? Having the hardest time picking my plate color :-[Google "LeandreN blue plate" pics.
Do you have a color sample of the blue plate?(http://i.imgur.com/sMtHlwh.jpg)
Do you have a time frame of when these will be delivered ?Hopefully within 3 months.
Do you have a color sample of the blue plate?Show Image(http://i.imgur.com/sMtHlwh.jpg)
How is the GONs PCB fit for an aluminum TEX case?
How is the GONs PCB fit for an aluminum TEX case?
3 weeksHow about deadline ?Do you have a time frame of when these will be delivered ?Hopefully within 3 months.
Invoicing is after orders end?Yes
How is the GONs PCB fit for an aluminum TEX case?
There is post about fitting nerd60 to tex aluminium case, like this one
https://www.reddit.com/r/MechanicalKeyboards/comments/3780ny/my_custom_nerd_60_is_finally_complete/
But there is also post about fitting nerd60 to tex acrylic case with some modification
http://imgur.com/a/Ruozq
It seems that if you have side led soldered on nerd60 pcb, the pcb will not fit into the case, otherwise it is fine.
All I ask is everyone use Zealios and SMD LEDs for this board to look EXTRA AWESOME. Because with normal LEDs, I think you're just stuck at AWESOME. ;)I understand that it is underglow LEDs, but is there SMD switch LEDs?
All I ask is everyone use Zealios and SMD LEDs for this board to look EXTRA AWESOME. Because with normal LEDs, I think you're just stuck at AWESOME. ;)I understand that it is underglow LEDs, but is there SMD switch LEDs?
Of courseAll I ask is everyone use Zealios and SMD LEDs for this board to look EXTRA AWESOME. Because with normal LEDs, I think you're just stuck at AWESOME. ;)I understand that it is underglow LEDs, but is there SMD switch LEDs?
You are right. Now these PCBs seems to have top mounted SMD compability!All I ask is everyone use Zealios and SMD LEDs for this board to look EXTRA AWESOME. Because with normal LEDs, I think you're just stuck at AWESOME. ;)I understand that it is underglow LEDs, but is there SMD switch LEDs?
MD recently offered Gateron switches that are designed for SMD switch LEDs, I am not sure what they are though.
You are right. Now these PCBs seems to have top mounted SMD compability!All I ask is everyone use Zealios and SMD LEDs for this board to look EXTRA AWESOME. Because with normal LEDs, I think you're just stuck at AWESOME. ;)I understand that it is underglow LEDs, but is there SMD switch LEDs?
MD recently offered Gateron switches that are designed for SMD switch LEDs, I am not sure what they are though.
You are right. Now these PCBs seems to have top mounted SMD compability!All I ask is everyone use Zealios and SMD LEDs for this board to look EXTRA AWESOME. Because with normal LEDs, I think you're just stuck at AWESOME. ;)I understand that it is underglow LEDs, but is there SMD switch LEDs?
MD recently offered Gateron switches that are designed for SMD switch LEDs, I am not sure what they are though.
Right, you can install in-switch LEDs, and also SMD LEDs on the back of the PCB.
You are right. Now these PCBs seems to have top mounted SMD compability!All I ask is everyone use Zealios and SMD LEDs for this board to look EXTRA AWESOME. Because with normal LEDs, I think you're just stuck at AWESOME. ;)I understand that it is underglow LEDs, but is there SMD switch LEDs?
MD recently offered Gateron switches that are designed for SMD switch LEDs, I am not sure what they are though.
Right, you can install in-switch LEDs, and also SMD LEDs on the back of the PCB.
These PCBs have had top SMD compatibility for quite some time, since Gon released version 2.0. The SMD spots on top aren't placed where it would be necessary to have the special switches.
You are right. Now these PCBs seems to have top mounted SMD compability!All I ask is everyone use Zealios and SMD LEDs for this board to look EXTRA AWESOME. Because with normal LEDs, I think you're just stuck at AWESOME. ;)I understand that it is underglow LEDs, but is there SMD switch LEDs?
MD recently offered Gateron switches that are designed for SMD switch LEDs, I am not sure what they are though.
Right, you can install in-switch LEDs, and also SMD LEDs on the back of the PCB.
These PCBs have had top SMD compatibility for quite some time, since Gon released version 2.0. The SMD spots on top aren't placed where it would be necessary to have the special switches.
That is interesting, do they use the same resistors that the in-switch Leds?
Ok, will edit.Of courseAll I ask is everyone use Zealios and SMD LEDs for this board to look EXTRA AWESOME. Because with normal LEDs, I think you're just stuck at AWESOME. ;)I understand that it is underglow LEDs, but is there SMD switch LEDs?there aren't as switches can't accommodate SMD LEDs.I was wrong.Show Image(https://massdrop-s3.imgix.net/product-images/smd-led-compatible-gateron-switches/MD-14613_20151222110209_6c0de1d11e9e5598.jpg)
@LeandreN: Your signature link redirects to the IC thread, not the GB.
So the silver color plates are painted, ya? Do we have any pics? I hope its a bit darker than the bare metal plate, if it looks greyish that would be just perfect.. Just ordered a titanium grey case from taobao. Gonna use the nantucket selectric set.Silver is silver. At least the plate from round 3 is a quite light silver. I think a non colored plate would work better (if available).
So the silver color plates are painted, ya? Do we have any pics? I hope its a bit darker than the bare metal plate, if it looks greyish that would be just perfect.. Just ordered a titanium grey case from taobao. Gonna use the nantucket selectric set.It's lighter. It's shiny.
You guys think the steel plate would match this case better than the silver? I guess it's kinda a pointless question cause I've been leaning toward winkeyless plate anyway, but just wondering.
The steel plate isn't shiny. There's some production burn marks on the bottom of it too (not major, but I wanted to let you know about them).
Is there a specific look you're going for? The aluminum in grey might be a better choice for you.
The steel plate isn't shiny. There's some production burn marks on the bottom of it too (not major, but I wanted to let you know about them).
Is there a specific look you're going for? The aluminum in grey might be a better choice for you.
Well I am picking up a winkeyless plate and a universal plate just for versatility, and I figure I can always sell one later if I don't use it, but I'm really leaning toward using that winkeyless plate. Obviously my only choices in the gb for wkl plate color is black, silver, or orange. You can see my case above, it doesn't have the tabs that come up to cover the black winkey spaces, so I'm wondering how awkward this is going to look.
Otherwise that, not really loooking for a specific look. It is my first keyboard build though, so I guess I have a bit of a problem envisioning how all this will look in the end.
My advice is to consider what the winkeyless will look like given you have a lip (even slightly) on the case. The other option is to use a Duck Blocker (if you can source some) or a switch blocker from Signature Plastics. I think 60% is enough reduction compared to a larger board so I fill out my keys. I just never do ISO because ewww. ;)
It is a lot of work for desoldering, so just make sure you decide on it before doing it. Mounting everything up should be sufficient for a test. PM me if you have any questions, I always love to help new people with their customs!
Nice! Where were you 30 days ago when I started the JD45 buy?! Haha
I want to buy from both of your GBs more because I want to support you guys and less that I even want the boards. LOL
WOW Nice GB! Looking into this one! Everyone else should consider as well! Great GB leader!
when is the deadline for ordering?
3 weeksHow about deadline ?Do you have a time frame of when these will be delivered ?Hopefully within 3 months.
when is the deadline for ordering?3 weeksHow about deadline ?Do you have a time frame of when these will be delivered ?Hopefully within 3 months.
Show Image(http://images.tapatalk-cdn.com/16/03/18/ee94d000509fa7e9b5022a280ca4eed9.jpg)
Alternate version by @lokomotivet
Show Image(http://images.tapatalk-cdn.com/16/03/18/ee94d000509fa7e9b5022a280ca4eed9.jpg)
Alternate version by @lokomotivet
<3
What a skammer, you're not even gonna deliver on that kebabShow Image(http://images.tapatalk-cdn.com/16/03/18/ee94d000509fa7e9b5022a280ca4eed9.jpg)
Alternate version by @lokomotivet
Does ANSI plates generally have better compatibility in terms of Keycaps ?Without a doubt.
I have something to ask about colours of the plates.
So this is silver ? (from r1 GB):
and this is steel ? (Only Universal plate as I understood):
And I have made a mistake when taking 2 pack of 6.25 instead of 1 of 6.25 and 1 of 7, I will PM you just before the end, because I'm still undecided.
Is SEPA suitable for UK buyers ?Yes, SEPA is a bank transfer and it's suitable for UK buyers as the UK is a state member of the EU (albeit it's not in the eurozone).
There isn't much information online saying how much extras it would charge.
Is SEPA basically bank transfer ?
could i get an estimate on shipping cost for a pcb, a steel plate and stabs to australia? $7 would be amazing and $35 would be a bit too much, cheers.15$
Alright, sold.could i get an estimate on shipping cost for a pcb, a steel plate and stabs to australia? $7 would be amazing and $35 would be a bit too much, cheers.15$
Thanks for clarifying.Is SEPA suitable for UK buyers ?Yes, SEPA is a bank transfer and it's suitable for UK buyers as the UK is a state member of the EU (albeit it's not in the eurozone).
There isn't much information online saying how much extras it would charge.
Is SEPA basically bank transfer ?
Fees depend mainly on your bank and conversion rates, for you'll be issueing the payment in pounds but it will be converted to euros.
could i get an estimate on shipping cost for a pcb, a steel plate and stabs to australia? $7 would be amazing and $35 would be a bit too much, cheers.15$
Can I please know whether the STEEL option has a BRUSHED TEXTURE ?It has, but it's not nearly as nice as the aluminium due to the laser.
I am in, going all orange Boi :)
I am in, going all orange Boi :)
That's great to hear!
Show Image(http://i.imgur.com/5l6zsmi.jpg)
tháts áwesome !Show Image(http://i.imgur.com/5l6zsmi.jpg)
tháts áwesome !Show Image(http://i.imgur.com/5l6zsmi.jpg)
now can we see some HHKB plates in orange please ? :)
Show Image(http://i.imgur.com/5l6zsmi.jpg)
Yep, this excites me quite a lot ;D ;D. Cannot wait to get something like this in my arsenal.
I'm joining the ride! I guess I need only one set + 6.25 stabilizers for ANSI Jelly POM? Kind of a noob question that follows, but do I only need to change Enter/LShift keycap (think I'll have extra from Feng's GB) and switch PCB position if I want ISO (since I used ISO since forever, never did use ANSI).
Show Image(http://i.imgur.com/5l6zsmi.jpg)
Show Image(http://i.imgur.com/5l6zsmi.jpg)
Is this the GH60 case that can be found on taobao? (https://item.taobao.com/item.htm?id=524317609075)
the MOQ for the black pcb is met! :D
I'm starting to worry about the MOQ for orange, do you think it's gonna make it ? :(the MOQ for the black pcb is met! :D
Still two weeks left, in additon, I will order my PCBs. I think we are good to go.
I'm starting to worry about the MOQ for orange, do you think it's gonna make it ? :(the MOQ for the black pcb is met! :D
Still two weeks left, in additon, I will order my PCBs. I think we are good to go.
So basically we need 12 more orange PCBs, that should be feasible.I'm starting to worry about the MOQ for orange, do you think it's gonna make it ? :(Yes, I think it is going to be fine :) As long as we get 90 PCBs total, in this GB.
So basically we need 12 more orange PCBs, that should be feasible.I'm starting to worry about the MOQ for orange, do you think it's gonna make it ? :(Yes, I think it is going to be fine :) As long as we get 90 PCBs total, in this GB.
Vacation. I will be a little offline in the next coming days. I will be back next week.
Please contact support@leandrekeyboards.com for any questions!
Thanks.Vacation. I will be a little offline in the next coming days. I will be back next week.
Please contact support@leandrekeyboards.com for any questions!
Have a nice time! :)
I just place an order for 2. Just checking if this case will fit?
http://winkeyless.kr/product/bbb_acrylic-case-with-rgb-diffuser/
I'm thinking of joining this GB (https://www.massdrop.com/buy/royal-glam-60-wood-keyboard-case), but I'm not sure if case is compatible...and it's a bit pricey :eek:
Does anyone have experience using NerDy GUI in virtual machine ?
Do I understand correctly that these will ship from within the EU? The payment image is gone, but I saw other people refer to SEPA, so I'm guessing yes? If yes, that probably also means no outrages custom charges (if you order within the EU)?
Shipping from EĜS, not the European Union. I'm in Norway. I think the same export rules apply though.Do I understand correctly that these will ship from within the EU? The payment image is gone, but I saw other people refer to SEPA, so I'm guessing yes? If yes, that probably also means no outrages custom charges (if you order within the EU)?
Yes, it is shipping from the EU. :D
Shipping from EĜS, not the European Union. I'm in Norway. I think the same export rules apply though.Do I understand correctly that these will ship from within the EU? The payment image is gone, but I saw other people refer to SEPA, so I'm guessing yes? If yes, that probably also means no outrages custom charges (if you order within the EU)?
Yes, it is shipping from the EU. :D
Do I understand correctly that these will ship from within the EU?Since LeandreN is located in Norway, goods are actually shipped from EEA (European Economic Area) rather than EU (European Union).
The payment image is gone, but I saw other people refer to SEPA, so I'm guessing yes?Correct, LeandreN was referring to SEPA in that bit.
no outrages custom charges (if you order within the EU)?Correct. Norway is EFTA member (European Free Trade Association) and it has the same trading benefits of EU members.
What would the shipping cost to Canada for a plate and PCB be?15$
I'm back. Let me know if you have any questions. 7 days left.
Hi Leandren,
I got a question regarding the white plate.
If I'm not mistaken it's a white anodized aluminium plate? How does that work, did they finally come up with a way to anodize white? I guess you don't have a picture of a sample, so I know what'd await me?
Kind regards,
Tobias
I'm back. Let me know if you have any questions. 7 days left.
Will I be able to mount the plate mounted 65g zealios (https://zealpc.net/collections/group-buy-pre-orders/products/zealio) on the universal plate in this GB? Or should I order the PCB Mount switches?
Can I buy plate only?Yes
9 more orange pcb's to go!Technically, based on LeandreN's last statements, we are good already; I suspect he's gonna buy 10 for himself to sell later on.
News. The Winkeyless plate will have ISO & ANSI enter support, 2,75u support(in addition to 1,75u + 1u) it will have ISO shift support and ANSI shift support. The same with the HHKB plate, so now you will have a lot of options here.
TLDR: merging ISO & ANSI designs on the winkeyless/HHKB plates. HHKB will have ISO enter support.
For some of the places, yes. This makes no difference for those that wanted the base layout whatsoever.News. The Winkeyless plate will have ISO & ANSI enter support, 2,75u support(in addition to 1,75u + 1u) it will have ISO shift support and ANSI shift support. The same with the HHKB plate, so now you will have a lot of options here.
TLDR: merging ISO & ANSI designs on the winkeyless/HHKB plates. HHKB will have ISO enter support.
Wait, so the plate now has universal style cutouts?
For some of the places, yes. This makes no difference for those that wanted the base layout whatsoever.
For some of the places, yes. This makes no difference for those that wanted the base layout whatsoever.
I think saying "no difference" is taking it a little too far. I haven't joined yet, but I've been thinking about picking up a WKL plate, and one of the main reasons why is that I don't really like the gaps between switches in my current universal plate. The bottom row is the most important IMO, so the shared enter doesn't make any difference to me really (as row 3/4 isn't as visible). I don't like the idea of an universal shift cutout though, as I'm afraid it'll visible between the WKL gap, which could ruin it a little bit for me...
For some of the places, yes. This makes no difference for those that wanted the base layout whatsoever.
I think saying "no difference" is taking it a little too far. I haven't joined yet, but I've been thinking about picking up a WKL plate, and one of the main reasons why is that I don't really like the gaps between switches in my current universal plate. The bottom row is the most important IMO, so the shared enter doesn't make any difference to me really (as row 3/4 isn't as visible). I don't like the idea of an universal shift cutout though, as I'm afraid it'll visible between the WKL gap, which could ruin it a little bit for me...
I have to agree with this. I'm not the biggest fan of the gaps in plates between switches, and was planning on using this build with some experimental backlighting and not sure if this will lead to inconsistent lighting. And I know a visible gap for the shiftcut would make this a deal breaker.
For some of the places, yes. This makes no difference for those that wanted the base layout whatsoever.
I think saying "no difference" is taking it a little too far. I haven't joined yet, but I've been thinking about picking up a WKL plate, and one of the main reasons why is that I don't really like the gaps between switches in my current universal plate. The bottom row is the most important IMO, so the shared enter doesn't make any difference to me really (as row 3/4 isn't as visible). I don't like the idea of an universal shift cutout though, as I'm afraid it'll visible between the WKL gap, which could ruin it a little bit for me...
I have to agree with this. I'm not the biggest fan of the gaps in plates between switches, and was planning on using this build with some experimental backlighting and not sure if this will lead to inconsistent lighting. And I know a visible gap for the shiftcut would make this a deal breaker.
Unfortunately, the participants of this GB can't have it both ways. There are EITHER multiple layout options for those who need them, OR there is one fixed layout where you won't see the cutout if you look at it at a certain angle. Which is more beneficial to the participants as a whole?
I mean, I will have ISO shift support on the HHKB plate as I said in the beginning, so there will be very little difference by adding right shift support too. You don't really see it from a normal angle(http://uploads.tapatalk-cdn.com/20160329/ba3fcd1e631215146e14005e9910d8de.jpg)For some of the places, yes. This makes no difference for those that wanted the base layout whatsoever.
I think saying "no difference" is taking it a little too far. I haven't joined yet, but I've been thinking about picking up a WKL plate, and one of the main reasons why is that I don't really like the gaps between switches in my current universal plate. The bottom row is the most important IMO, so the shared enter doesn't make any difference to me really (as row 3/4 isn't as visible). I don't like the idea of an universal shift cutout though, as I'm afraid it'll visible between the WKL gap, which could ruin it a little bit for me...
I have to agree with this. I'm not the biggest fan of the gaps in plates between switches, and was planning on using this build with some experimental backlighting and not sure if this will lead to inconsistent lighting. And I know a visible gap for the shiftcut would make this a deal breaker.
Unfortunately, the participants of this GB can't have it both ways. There are EITHER multiple layout options for those who need them, OR there is one fixed layout where you won't see the cutout if you look at it at a certain angle. Which is more beneficial to the participants as a whole?
I mean, there are universal plates in the GB too. The HHKB ones are specifically so you don't have gaps where there are missing bottom row switches. That issue is a bit more extreme aestethically, but its still an option for ISO users.
I mean, there are universal plates in the GB too. The HHKB ones are specifically so you don't have gaps where there are missing bottom row switches. That issue is a bit more extreme aestethically, but its still an option for ISO users to simply buy those.
Show Image(http://uploads.tapatalk-cdn.com/20160329/90e5739171b1035fe7d2c0efe3bd1a58.jpg)
Low angle. You can see the stabiliser spot.
Unfortunately, the participants of this GB can't have it both ways. There are EITHER multiple layout options for those who need them, OR there is one fixed layout where you won't see the cutout if you look at it at a certain angle. Which is more beneficial to the participants as a whole?
I don't want to out myself as a complete noob or anything, but this is my first time assembling. Is there a lot of soldering that is going to need to be done? Also, what all should I need to purchase to finish out the build?
I have already purchased a 60% case and some zealio switches. Am I missing anything?
Show Image(http://uploads.tapatalk-cdn.com/20160329/90e5739171b1035fe7d2c0efe3bd1a58.jpg)
Low angle. You can see the stabiliser spot.
I don't want to out myself as a complete noob or anything, but this is my first time assembling. Is there a lot of soldering that is going to need to be done? Also, what all should I need to purchase to finish out the build?
I have already purchased a 60% case and some zealio switches. Am I missing anything?
You will need some keycaps and a cable. There is not much soldering as you only have to do the switches.
I don't want to out myself as a complete noob or anything, but this is my first time assembling. Is there a lot of soldering that is going to need to be done? Also, what all should I need to purchase to finish out the build?
I have already purchased a 60% case and some zealio switches. Am I missing anything?
You will need some keycaps and a cable. There is not much soldering as you only have to do the switches.
Show Image(http://uploads.tapatalk-cdn.com/20160329/90e5739171b1035fe7d2c0efe3bd1a58.jpg)
Low angle. You can see the stabiliser spot.
It is just a visual artifact, or is the "4" key taller?
I don't really like the gaps between switches in my current universal plate.I gotta say, the universal plate is way too universal, but for that price I can't really ask for anything better. I got myself some quotes for lasercut and CNC plates in Italy and a single plate would cost over 40.
Yeah, what it lacks in "style" it makes up for in versatility and price, clearly. Which is why I'm (still) a little hyped on the WKL plates as they have the style the universal plates are lacking IMO, and without having a higher price.I don't really like the gaps between switches in my current universal plate.I gotta say, the universal plate is way too universal, but for that price I can't really ask for anything better. I got myself some quotes for lasercut and CNC plates in Italy and a single plate would cost over 40.
FYI Tex 60% cases back in stock at mechanicalkeyboards.com. Orange!!! :D
Placed an order!
Will I get a confirmation email or smthg?
Do the PCBs have SMD components pre-soldered? (Diodes etc)
Just to clarifyResistors and diodes are presoldered. LEDs don't.
there are 3 LED spots on the keyboard
1x SMD switch leds
1x normal switch leds
1x side/under leds
The presoldered resistors cover the side/under leds spots and one of the top spots.
No LEDs come presoldered.
Placed an order!You'll receive invoice when the ordering phase is over.
Will I get a confirmation email or smthg?
Do the PCBs have SMD components pre-soldered? (Diodes etc)
So I'm having a debate on whether I should stick with the black PCB w/ white plate I ordered, or if I should go orange and white. I plan to put this in a wood case with the 1976 keyset, so orange might be a better fitting piece. But then again, with a plate on top, will the PCB even show? What do you guys think?
So I'm having a debate on whether I should stick with the black PCB w/ white plate I ordered, or if I should go orange and white. I plan to put this in a wood case with the 1976 keyset, so orange might be a better fitting piece. But then again, with a plate on top, will the PCB even show? What do you guys think?
Personally, I'm going for a black PCB with a red plate. I have an alu case that is greyish so I think the contrast would be pretty nice.
Orange might be nice for your case. But I'm just picturing it in my head lol.
So just to clarify, I can just solder RGB LEDs on the board and I'll be g2g? I'm pretty sure I get it but I want to be super duper sure, you know?
So just to clarify, I can just solder RGB LEDs on the board and I'll be g2g? I'm pretty sure I get it but I want to be super duper sure, you know?
From what i've understood, you can't mount RGB leds on Gon PCB, only winkeyless PCB support RGB underlight mounted on PCB.
The only LED that you can mount are :
-1206 SMD for bottom et top
-3mm, 2x3x4mm,1.8 mm on switches
However you can add a WS2812 RGB strip between PCB and case.
Pls Correct me, if i'm wrong (no real experience, only browsing)
LeandreN is there some type of guarantee hes not going to pull some **** like that with you?
LeandreN is there some type of guarantee hes not going to pull some **** like that with you?
Thanks for asking.
No, there is no gurantee, however, those outstanding orders of him are all assembly orders(soldering, building and switch modding). I had a person who personally ordered a PCB last month, and it was shipped within short time and arrived the same month. This is confirmed by multiple people. I also asked him about it, and GON said himself that some of the orders were massively delayed due to upgrading some PCBs and the time it takes to assemble orders. Our PCBs require no assembly and will be shipped directly from the factory, soldered, to GON where he will test each and one of them and ship them here.
If I would like to change something in my order, do I message you to do the change, or do you cancel it so I can send a new one?
LeandreN is there some type of guarantee hes not going to pull some **** like that with you?
Thanks for asking.
No, there is no gurantee, however, those outstanding orders of him are all assembly orders(soldering, building and switch modding). I had a person who personally ordered a PCB last month, and it was shipped within short time and arrived the same month. This is confirmed by multiple people. I also asked him about it, and GON said himself that some of the orders were massively delayed due to upgrading some PCBs and the time it takes to assemble orders. Our PCBs require no assembly and will be shipped directly from the factory, soldered, to GON where he will test each and one of them and ship them here.
Thanks for the reply on that, not meaning to stir up the ****. I will most likely get in on this!
If I would like to change something in my order, do I message you to do the change, or do you cancel it so I can send a new one?
support@leandrekeyboards.com with the changes.
Sorry for nagging, but will there be any graphics/pictures of the new WKL (or HHKB) plates before the sale ends? I just want to take a look before ordering.
White anodizing isn't available, but i thought we could get some super light silver anodizing. Unfortunately it is very much like the silver plates.
White anodizing isn't available, but i thought we could get some super light silver anodizing. Unfortunately it is very much like the silver plates.
Oh I see. So for those of us who ordered white plates, it will drop back to the second choice? In which case, can I change my second choice from what I had originally filled? Is orange available for universal ANSI?
Okay, great. Can I, in that case, change my second choice to the Orange universal plate? Should I email you to do that?
Okay, great. Can I, in that case, change my second choice to the Orange universal plate? Should I email you to do that?
Please email me about it. Thanks.
Hi, this will be my first keyboard build and I'm interested to join this!
I am planning to build one with a black case. As such, I would think that a black plate would match best with it. However, I have concerns with LED backlighting when using a black plate. I'm assuming that the lighting won't be very even cause of the black plate and that it will be quite dim right?
It might be a better choice for me to go with a silver plate, but I just wanted to get some opinions before placing the order.
Thanks
New GB announcement soon!Holy smoke.Show Image(http://i.imgur.com/llQHr0g.png)
New GB announcement soon!Show Image(http://i.imgur.com/llQHr0g.png)
New GB announcement soon!Show Image(http://i.imgur.com/llQHr0g.png)
REKT!!!!!1!
New GB announcement soon!Show Image(http://i.imgur.com/llQHr0g.png)
New GB announcement soon!Show Image(http://i.imgur.com/llQHr0g.png)
Does anyone know the voltage supplied to the key matrix - so we could calculate the resistors for the switch LEDs?
I am a noob to this group buy process and I'm not afraid to ask what needs to be in the declaration value field at the end. I am located in the US if that matters. Excited to get a HHKB kit, looks sweet!
do I join!?
Hey Leandre, I've emailed you a request to make one more change to my order. I'd previously gone with a black pcb and orange plate, but I'd like to change it to an orange pcb with Carbon Fiber plate. Please let me know if that's possible. Thanks!
Hey Leandre, I've emailed you a request to make one more change to my order. I'd previously gone with a black pcb and orange plate, but I'd like to change it to an orange pcb with Carbon Fiber plate. Please let me know if that's possible. Thanks!
It is possible. I am going through emails soon.
The HHKB plates are : covered 1u - 1.5u - 1.5u - 7u - 1u - 1.5u - covered 1.5u
Show Image(http://images.tapatalk-cdn.com/16/03/14/f270af0a50faaef0efd434d198d47c15.jpg)
It is possible. I am going through emails soon.
It is possible. I am going through emails soon.
Sent an order during the weekend.
Original post shows the HHKB bottom row to be:The HHKB plates are : covered 1u - 1.5u - 1.5u - 7u - 1u - 1.5u - covered 1.5u
but pics from LeandreN show assembled keyboards/plates as: covered 1.5u-1u-1.5u-7u-1.5u-1u-covered 1.5u
(i.e. winkeyless with corner blockers)Show Image(http://images.tapatalk-cdn.com/16/03/14/f270af0a50faaef0efd434d198d47c15.jpg)
I'm assuming the pics are right, so I ordered the HHKB plate.
Just thought I'd mention the discrepancy, in case anyone else was deciding to get the HHKB plate.
HHKB with ISO enterWhere is your backspace gonna be?
HHKB with ISO enterWhere is your backspace gonna be?
Will you post your keyboard? I'm curious to see how it looks like.HHKB with ISO enterWhere is your backspace gonna be?
At its normal position and in 2u size, I use it a lot and the times I have try the official HHKB backspace/delete position I have never become accustomed to it, my stubborn muscle memory failed to learn new tricks, "an old dog does not ..." you know.
Will you post your keyboard? I'm curious to see how it looks like.HHKB with ISO enterWhere is your backspace gonna be?
At its normal position and in 2u size, I use it a lot and the times I have try the official HHKB backspace/delete position I have never become accustomed to it, my stubborn muscle memory failed to learn new tricks, "an old dog does not ..." you know.
Of course I will, there is one nice with orange and black accents already somewhere in the forums, if I find it I will refer you to it.
Here it is, but mine will have 2u backspace, instead.Show Image(http://i.imgur.com/AmDzA2q.jpg)
Of course I will, there is one nice with orange and black accents already somewhere in the forums, if I find it I will refer you to it.
Here it is, but mine will have 2u backspace, instead.Show Image(http://i.imgur.com/AmDzA2q.jpg)
Would you mind providing more info on that board? what is the case etc? :) looks absolutely stunning!
Of course I will, there is one nice with orange and black accents already somewhere in the forums, if I find it I will refer you to it.
Here it is, but mine will have 2u backspace, instead.Show Image(http://i.imgur.com/AmDzA2q.jpg)
Would you mind providing more info on that board? what is the case etc? :) looks absolutely stunning!
Looks like WKL b.face case
Looks nice.Will you post your keyboard? I'm curious to see how it looks like.HHKB with ISO enterWhere is your backspace gonna be?
At its normal position and in 2u size, I use it a lot and the times I have try the official HHKB backspace/delete position I have never become accustomed to it, my stubborn muscle memory failed to learn new tricks, "an old dog does not ..." you know.
Of course I will, there is one nice with orange and black accents already somewhere in the forums, if I find it I will refer you to it.
Here it is, but mine will have 2u backspace, instead.Show Image(http://i.imgur.com/AmDzA2q.jpg)
Spread the words.psssst. Deskthority.
I will close this in two hours.
Spread the words.
19:30 UTC
Make your order changes.
Spread the words.psssst. Deskthority.
I will close this in two hours.
Spread the words.
19:30 UTC
Make your order changes.
Email me: support@leandrekeyboards.com if you want to confirm your orders.
Will do. Any idea how of if we could check our current orders?
Would like to double check if possible.
2 hours T_TQuick!
UTC 7:30 PM as stated.CLOSED
what are your hours?
Need to get the orders placed. Invoicing will start this week, please be prepared to pay rapidly.
Need to get the orders placed. Invoicing will start this week, please be prepared to pay rapidly.
Wallet is already under torture, crying and whining.
Need to get the orders placed. Invoicing will start this week, please be prepared to pay rapidly.
Wallet is already under torture, crying and whining.
What doesn't kill it will make it stronger?
CLOSED
Please read the invoices. I might do some minor mistakes while invoicing.
Hey Leandre, I sent you an email about this too, but just posting here. The invoice you sent lists the wrong things for my order (it lists 2 plates instead of 1 carbon fiber plate and 1 orange pcb). If you can fix it and resend, I'm ready to pay right away. Thanks.
And all people paying with SEPA, please send a proof of payment as fast as possible so we don't forget about that. Thanks.I will pay as soon as I'm back home as I don't have my online banking credentials with me.
Thanks.And all people paying with SEPA, please send a proof of payment as fast as possible so we don't forget about that. Thanks.I will pay as soon as I'm back home as I don't have my online banking credentials with me.
Will email you the transaction reference number.
Paid. You got email.And all people paying with SEPA, please send a proof of payment as fast as possible so we don't forget about that. Thanks.I will pay as soon as I'm back home as I don't have my online banking credentials with me.
Will email you the transaction reference number.
**** how did i forget to order
I sent the payment to GON this morning. 5 minutes later I received this mail.Show Image(http://uploads.tapatalk-cdn.com/20160406/0c0cd6a583f6abc2c414e7580335d9ce.jpg)
How're we doing with paid invoices, LeandreN? 20%? 30%?~80%
How're we doing with paid invoices, LeandreN? 20%? 30%?~80%
Plate manufacturer is paid. GON is paid. Waiting for production to start.
Kinda curious what aluminum cases others have gone with. I picked up the aluminum gh60 case on taobao.Link please?
Kinda curious what aluminum cases others have gone with. I picked up the aluminum gh60 case on taobao.
Kinda curious what aluminum cases others have gone with. I picked up the aluminum gh60 case on taobao.
I bought an orange aluminum TEX case. I have an orange PCB + carbon fiber plate coming with this order. Going to use Zealios switches, white LED's and throw on Troubled Minds keycaps with it.
I'm thinking of a ziptyze case, with a bit of painting to go with it for the GID/UV reactive goodness.Good idea! The cases are great
Does this PCB have the same lineup as the Pok3r boards? Wondering if Datamancer's Pok3r wood cases will work.Not 100% sure but I think so.
https://www.massdrop.com/buy/pok3r-wood-case
red Hammer replica case:Show Image(http://i.imgur.com/i1eI6Lz.jpg)
red Hammer replica case:Show Image(http://i.imgur.com/i1eI6Lz.jpg)
That's the case I want to get but in purple. Where did you order it? Is the only source taobao with a proxy?
https://world.taobao.com/item/45583361638.htm?spm=a312a.7700714.0.0.AQXEs1#detail
Kinda curious what aluminum cases others have gone with. I picked up the aluminum gh60 case on taobao.Link please?
Kinda curious what aluminum cases others have gone with. I picked up the aluminum gh60 case on taobao.Link please?
This is the case I bought off taobao:Show Image(http://i.imgur.com/CyX8r5D.jpg)
Please forgive the awkward angle, this is the picture the proxy sent me.
Color is called "titanium gray". I think I got it within about 2 weeks. I used Bhiner as a proxy. It was around $70-$80 after paying proxy and shipping. I am pretty pleased.
I'll be using 65g zealios and BSP blanks/RGB set with a black winkeyless plate.
This is a link to the taobao listing of the seller I bought from: https://world.taobao.com/item/524317609075.htm#detail
Kinda curious what aluminum cases others have gone with. I picked up the aluminum gh60 case on taobao.
Show Image(http://i.imgur.com/y3EYER2.png)
550 USD donated to the Norwegian Cancer Society.
This is amazing, thanks a lot for your support. There are a few remaining payments, so we might get 50-100 USD more.
Thanks!
Show Image(http://i.imgur.com/y3EYER2.png)
550 USD donated to the Norwegian Cancer Society.
This is amazing, thanks a lot for your support. There are a few remaining payments, so we might get 50-100 USD more.
Thanks!
Show Image(http://i.imgur.com/y3EYER2.png)
550 USD donated to the Norwegian Cancer Society.
This is amazing, thanks a lot for your support. There are a few remaining payments, so we might get 50-100 USD more.
Thanks!
You are a very good person for doing this. I had three family members that had breast cancer. My girlfriend had two family members with ovarian cancer. I should have donated more.
Show Image(http://i.imgur.com/y3EYER2.png)
550 USD donated to the Norwegian Cancer Society.
This is amazing, thanks a lot for your support. There are a few remaining payments, so we might get 50-100 USD more.
Thanks!
Show Image(http://i.imgur.com/y3EYER2.png)
550 USD donated to the Norwegian Cancer Society.
This is amazing, thanks a lot for your support. There are a few remaining payments, so we might get 50-100 USD more.
Thanks!
You are a very good person for doing this. I had three family members that had breast cancer. My girlfriend had two family members with ovarian cancer. I should have donated more.
Show Image(http://i.imgur.com/y3EYER2.png)
550 USD donated to the Norwegian Cancer Society.
This is amazing, thanks a lot for your support. There are a few remaining payments, so we might get 50-100 USD more.
Thanks!
You are a very good person for doing this. I had three family members that had breast cancer. My girlfriend had two family members with ovarian cancer. I should have donated more.
Agreed. I feel bad for not giving more. Leandre, is there a way for us to donate on our own? I looked but found nothing specific. Of course we can always donate to our own personal or local charities.
Just got a message from GON. Together, we decided that GONs shipment will be seperated into 3 shipments to try to avoid overvalued import taxes.In different dates, I assume.
Yes. Stabilisers will be sent first. Then PCB batch 1, then PCB batch 2.Just got a message from GON. Together, we decided that GONs shipment will be seperated into 3 shipments to try to avoid overvalued import taxes.In different dates, I assume.
I guess it's a good move because he has the time to test PCBs in batches.
I guess it's safe to assume that plates will arrive long before PCBs, so we can expect the first orders to be shipped out from you as soon as the first batch of PCBs arrive.
The first PCB batch may arrive before the plates actually.Amazing.
I'm excited. I bought three PCBs, three plates... three endgame builds! :)
One of them better be an orange PCB! ;)
Is it still possible to use PayPal instead of SEPA? I initially chose SEPA but my bank refuses to accept international payments without me dropping in. That's a PITA for me because of working hours so I'd rather pay the stupid PayPal fee.
What email do I have to send the money to?
Just got an update from GON today. PCBs are in production. Stabilisers are being sorted.
Plates are in queue at the moment.
Thanks for another great group buy!
I have finally finished the hand wire build with the R1 plate and stabs you generously sent me during the R3 group buy. I was going to remind you to add a little extra money to my R4 invoice as a thank you but totally forgot. Let me know how I can send you a thank you or how I can send a separate donation to the charity. I want to spread the good karma ;D
Apologies for poor picture quality... and poor wiring...
Thanks for another great group buy!
I have finally finished the hand wire build with the R1 plate and stabs you generously sent me during the R3 group buy. I was going to remind you to add a little extra money to my R4 invoice as a thank you but totally forgot. Let me know how I can send you a thank you or how I can send a separate donation to the charity. I want to spread the good karma ;D
Apologies for poor picture quality... and poor wiring...
Interesting, what controller do you use? and what keycaps are those?
Thanks for another great group buy!
I have finally finished the hand wire build with the R1 plate and stabs you generously sent me during the R3 group buy. I was going to remind you to add a little extra money to my R4 invoice as a thank you but totally forgot. Let me know how I can send you a thank you or how I can send a separate donation to the charity. I want to spread the good karma ;D
Apologies for poor picture quality... and poor wiring...
What case is that?Most likely, this one (http://aliexpress.com/item/Clear-Mini-Keyboard-GH60-plastic-Case-for-60-Mechanical-Gaming-Keyboard-Compatible-Poker2-Pok3r-Faceu-60/32559075729.html?spm=2114.010208.3.94.g2vWZT&ws_ab_test=searchweb201556_9,searchweb201602_4_10017_10005_10006_10034_10021_507_10022_10020_10018_10019,searchweb201603_1&btsid=f3bb0b47-845f-4cfb-9223-6025c9f90172).
will you be shipping orders as they come in, or are you going to wait for all shipments to come in before fulfilling orders? i.e. i only ordered a pcb and stabs; will i need to wait for all of the plates to come in before you ship my pcb and stabs?
Will this case (https://www.reddit.com/r/mechmarket/comments/4fonmr/ic_tric_60_casekit/)be able to properly fit the PCB,plate etc from this groupbuy? looked really fancy! :)
So hard to determine what case I should use for this!
What case is that?Most likely, this one (http://aliexpress.com/item/Clear-Mini-Keyboard-GH60-plastic-Case-for-60-Mechanical-Gaming-Keyboard-Compatible-Poker2-Pok3r-Faceu-60/32559075729.html?spm=2114.010208.3.94.g2vWZT&ws_ab_test=searchweb201556_9,searchweb201602_4_10017_10005_10006_10034_10021_507_10022_10020_10018_10019,searchweb201603_1&btsid=f3bb0b47-845f-4cfb-9223-6025c9f90172).
Just so you guys know--the NerD 60 has an "Indicator" LED which are two posts that are separate from the switch LEDs. In NerDy GUI, you can set these to do whatever you want them to do (I actually set mine to Caps Lock Indicator). That will require a standard 2-post TH LED, else you can also use a 1206 SMD LED (or 0805, just that it will be more difficult to solder) across the two pins if you're good at soldering.
That being said, Get some heat-shrink that's pretty small in order to get creative with laying the LED on its side so that you can blast some light across the side and out the gap between the plate and the PCB. I'll share what my final setup is (I'm going to blast light into the caps key as it'll be Zealio switches on the build). :)
Update
Not much happening now besides waiting for the different parts to arrive.
I think I have some updates from GON regarding the parts next week. Plates are in production.
Update
I just got in a letter a week ago, but didn't have time to open it until today, and since it is meant for all of you too, I will publish it here.Show Image(http://i.imgur.com/kmaWRR6g.jpg)Show Image(http://i.imgur.com/LtJysjz.jpg)
Dear William(me)!
Thanks a lot for your support to cancer course! Your gift of 4500 NOK is an important contribution to our work.
Our work is mainly based on funds raised and gifts, therefore, good support is crucial.
Today, 2 of 3 cancer patients survive and the development and the development is moving in a positive direction. Research on personalized cancer treatment escalates. It's about finding the right treatment for the right patient, and that is not an easy task, because humans are so different.
But no matter who we are or what genes we have, or what life we live, we all want to live a good life - and get the oppertunity to be old. Essentially, this is what cancer research is about: more time and better quality of life for all of us.
Your contribution creates hope! Thousand thanks(Norwegian way of saying "Thanks a lot")!
Kind regards,
Cancer Society
signed
name
Secretary General
Sorry if there are any mistakes in the translation. Some phrases are translated to give a better understanding in English.
Other updates
The first batch of PCBs is shipped to GON already.
The plates are in production, as I stated before. Kind of a long queue as there are many orders, hopefully I will have some news this week.
Stabilisers are taken care of, trust me. I may or may not already have these in my hands.
Let me know if you have any questions!
LeandreN
update on mail coming soon...
Update
I just got in a letter a week ago, but didn't have time to open it until today, and since it is meant for all of you too, I will publish it here.Show Image(http://i.imgur.com/kmaWRR6g.jpg)Show Image(http://i.imgur.com/LtJysjz.jpg)
Dear William(me)!
Thanks a lot for your support to cancer course! Your gift of 4500 NOK is an important contribution to our work.
Our work is mainly based on funds raised and gifts, therefore, good support is crucial.
Today, 2 of 3 cancer patients survive and the development and the development is moving in a positive direction. Research on personalized cancer treatment escalates. It's about finding the right treatment for the right patient, and that is not an easy task, because humans are so different.
But no matter who we are or what genes we have, or what life we live, we all want to live a good life - and get the oppertunity to be old. Essentially, this is what cancer research is about: more time and better quality of life for all of us.
Your contribution creates hope! Thousand thanks(Norwegian way of saying "Thanks a lot")!
Kind regards,
Cancer Society
signed
name
Secretary General
Sorry if there are any mistakes in the translation. Some phrases are translated to give a better understanding in English.
Other updates
The first batch of PCBs is shipped to GON already.
The plates are in production, as I stated before. Kind of a long queue as there are many orders, hopefully I will have some news this week.
Stabilisers are taken care of, trust me. I may or may not already have these in my hands.
Let me know if you have any questions!
LeandreN
update on mail coming soon...
Hi LeandreN. Is it too late to switch my plate color from silver to steel?
Hi LeandreN. Is it too late to switch my plate color from silver to steel?
Yes.
Show Image(http://i.imgur.com/bBkGMiO.jpg)Show Image(http://i.imgur.com/1BQvZQl.jpg)Show Image(http://i.imgur.com/LlkA57H.jpg)Show Image(http://i.imgur.com/CwHWY2f.jpg)Show Image(http://i.imgur.com/BaDAILL.jpg)Show Image(http://i.imgur.com/C4K8nys.jpg)
Looks like I also will be getting some extra PCBs for sale.
Shipping with EMS from GON when he is done testing every single one of them, so I will give him time to do that. We are waiting for the plates. The stabilisers are already here.
Show Image(http://i.imgur.com/bBkGMiO.jpg)Show Image(http://i.imgur.com/1BQvZQl.jpg)Show Image(http://i.imgur.com/LlkA57H.jpg)Show Image(http://i.imgur.com/CwHWY2f.jpg)Show Image(http://i.imgur.com/BaDAILL.jpg)Show Image(http://i.imgur.com/C4K8nys.jpg)
Looks like I also will be getting some extra PCBs for sale.
Shipping with EMS from GON when he is done testing every single one of them, so I will give him time to do that. We are waiting for the plates. The stabilisers are already here.
What is the "NerD" cutout on the bottom for? Never seen that on another 60% PCB.
Show Image(http://i.imgur.com/bBkGMiO.jpg)Show Image(http://i.imgur.com/1BQvZQl.jpg)Show Image(http://i.imgur.com/LlkA57H.jpg)Show Image(http://i.imgur.com/CwHWY2f.jpg)Show Image(http://i.imgur.com/BaDAILL.jpg)Show Image(http://i.imgur.com/C4K8nys.jpg)
Looks like I also will be getting some extra PCBs for sale.
Shipping with EMS from GON when he is done testing every single one of them, so I will give him time to do that. We are waiting for the plates. The stabilisers are already here.
If there are extra PCBs for sale I would be interested in one. Seems I ordered two plates and only one PCB. If I have to wait and buy it from your store that is fine as well.
Awesome! Just order some gateron tactile clears for this board!
They look awesome !Show Image(http://i.imgur.com/WhpRbpI.gif)
Awesome! Just order some gateron tactile clears for this board!
Where did you get those ?
Awesome! Just order some gateron tactile clears for this board!
Where did you get those ?
Winkeyless just got some new stock. I have yet to compare them to feelios.
Show Image(http://i.imgur.com/bBkGMiO.jpg)Show Image(http://i.imgur.com/1BQvZQl.jpg)Show Image(http://i.imgur.com/LlkA57H.jpg)Show Image(http://i.imgur.com/CwHWY2f.jpg)Show Image(http://i.imgur.com/BaDAILL.jpg)Show Image(http://i.imgur.com/C4K8nys.jpg)
Looks like I also will be getting some extra PCBs for sale.
Shipping with EMS from GON when he is done testing every single one of them, so I will give him time to do that. We are waiting for the plates. The stabilisers are already here.
I've never had a Gon PCB but I'm curious, it seems like there's a little piece that can be pulled off of the PCB, the part that says NerD on it and is about the size of a micro SD card. What is that? I've never noticed that on any of the other PCB's I've bought
That bluetooth module would be sweet, but my aluminum case sure ain't going to allow that work.
Missed the buy, as I forgot I had a 60% case. Would like to pick up someone's HHKB plate and board (no housing) if anyone has an extra set.
Thank You!
The PCBs are still being tested, and will be tested for a while.Have all been produced already?
The PCBs are still being tested, and will be tested for a while.Have all been produced already?
Wow, that was fast.The PCBs are still being tested, and will be tested for a while.Have all been produced already?
Yes.
Wow, that was fast.The PCBs are still being tested, and will be tested for a while.Have all been produced already?
Yes.
Do you think the GB will run on a faster schedule now?
Looks like we are ahead, at the moment.Nice.
Sorry if this has been asked before, but will there be extra plates?
I will be selling some extra PCBs soon.
I will be selling some extra PCBs soon.
I'm interested in one of the black PCB's if you will have any leftovers in that color.
I will be selling some extra PCBs soon.
I'm interested in one of the black PCB's if you will have any leftovers in that color.
Yeah. I will be selling some soon and ship with the GB orders. Black PCBs are available, as well as orange ones.
I want to be prepared when the plate and pcb will arrive, so what do I need for the backlight option of the pcb ?
I want to be prepared when the plate and pcb will arrive, so what do I need for the backlight option of the pcb ?
you could use 1206 smd leds and have clear switch housings. it's quite nice.
I want to be prepared when the plate and pcb will arrive, so what do I need for the backlight option of the pcb ?
you could use 1206 smd leds and have clear switch housings. it's quite nice.
i bought 100 white ones (http://www.ebay.com/itm/281968802883?_trksid=p2057872.m2749.l2649&var=580936284382&ssPageName=STRK%3AMEBIDX%3AIT) on ebay for $1.70. also planning on sip-socketing the switches, but idk what color leds i'm gonna put in the actual switch.
the 1206 leds go on the bottom side of the pcb; with clear switch housing, the light shines through the switches and negates the need for in-switch ledsI want to be prepared when the plate and pcb will arrive, so what do I need for the backlight option of the pcb ?
you could use 1206 smd leds and have clear switch housings. it's quite nice.
i bought 100 white ones (http://www.ebay.com/itm/281968802883?_trksid=p2057872.m2749.l2649&var=580936284382&ssPageName=STRK%3AMEBIDX%3AIT) on ebay for $1.70. also planning on sip-socketing the switches, but idk what color leds i'm gonna put in the actual switch.
Do you have an image on how that would look like? I don't fully understand where you'd place this led and why it is dependant on "Clear switch housings" ?
the 1206 leds go on the bottom side of the pcb; with clear switch housing, the light shines through the switches and negates the need for in-switch ledsI want to be prepared when the plate and pcb will arrive, so what do I need for the backlight option of the pcb ?
you could use 1206 smd leds and have clear switch housings. it's quite nice.
i bought 100 white ones (http://www.ebay.com/itm/281968802883?_trksid=p2057872.m2749.l2649&var=580936284382&ssPageName=STRK%3AMEBIDX%3AIT) on ebay for $1.70. also planning on sip-socketing the switches, but idk what color leds i'm gonna put in the actual switch.
Do you have an image on how that would look like? I don't fully understand where you'd place this led and why it is dependant on "Clear switch housings" ?
the 1206 leds go on the bottom side of the pcb; with clear switch housing, the light shines through the switches and negates the need for in-switch ledsI want to be prepared when the plate and pcb will arrive, so what do I need for the backlight option of the pcb ?
you could use 1206 smd leds and have clear switch housings. it's quite nice.
i bought 100 white ones (http://www.ebay.com/itm/281968802883?_trksid=p2057872.m2749.l2649&var=580936284382&ssPageName=STRK%3AMEBIDX%3AIT) on ebay for $1.70. also planning on sip-socketing the switches, but idk what color leds i'm gonna put in the actual switch.
Do you have an image on how that would look like? I don't fully understand where you'd place this led and why it is dependant on "Clear switch housings" ?
Aaah alright, thank you for the response :) will have to look into that a bit further then!
did you put the leds on the top side of the pcb?the 1206 leds go on the bottom side of the pcb; with clear switch housing, the light shines through the switches and negates the need for in-switch ledsI want to be prepared when the plate and pcb will arrive, so what do I need for the backlight option of the pcb ?
you could use 1206 smd leds and have clear switch housings. it's quite nice.
i bought 100 white ones (http://www.ebay.com/itm/281968802883?_trksid=p2057872.m2749.l2649&var=580936284382&ssPageName=STRK%3AMEBIDX%3AIT) on ebay for $1.70. also planning on sip-socketing the switches, but idk what color leds i'm gonna put in the actual switch.
Do you have an image on how that would look like? I don't fully understand where you'd place this led and why it is dependant on "Clear switch housings" ?
Aaah alright, thank you for the response :) will have to look into that a bit further then!
Yes I have an image this is mine. I wanted to try it out.Show Image(http://uploads.tapatalk-cdn.com/20160503/f25a62d8bb43f1624d9df64fe1998a43.jpg)
did you put the leds on the top side of the pcb?the 1206 leds go on the bottom side of the pcb; with clear switch housing, the light shines through the switches and negates the need for in-switch ledsI want to be prepared when the plate and pcb will arrive, so what do I need for the backlight option of the pcb ?
you could use 1206 smd leds and have clear switch housings. it's quite nice.
i bought 100 white ones (http://www.ebay.com/itm/281968802883?_trksid=p2057872.m2749.l2649&var=580936284382&ssPageName=STRK%3AMEBIDX%3AIT) on ebay for $1.70. also planning on sip-socketing the switches, but idk what color leds i'm gonna put in the actual switch.
Do you have an image on how that would look like? I don't fully understand where you'd place this led and why it is dependant on "Clear switch housings" ?
Aaah alright, thank you for the response :) will have to look into that a bit further then!
Yes I have an image this is mine. I wanted to try it out.Show Image(http://uploads.tapatalk-cdn.com/20160503/f25a62d8bb43f1624d9df64fe1998a43.jpg)
Update
Most of the plates has shipped to me and will arrive sometime late next week.
Still missing all the blue plates and some black plates from that shipement.
The PCBs are still being tested, and will be tested for a while.
the 1206 leds go on the bottom side of the pcb; with clear switch housing, the light shines through the switches and negates the need for in-switch ledsI want to be prepared when the plate and pcb will arrive, so what do I need for the backlight option of the pcb ?
you could use 1206 smd leds and have clear switch housings. it's quite nice.
i bought 100 white ones (http://www.ebay.com/itm/281968802883?_trksid=p2057872.m2749.l2649&var=580936284382&ssPageName=STRK%3AMEBIDX%3AIT) on ebay for $1.70. also planning on sip-socketing the switches, but idk what color leds i'm gonna put in the actual switch.
Do you have an image on how that would look like? I don't fully understand where you'd place this led and why it is dependant on "Clear switch housings" ?
Aaah alright, thank you for the response :) will have to look into that a bit further then!
Yes I have an image this is mine. I wanted to try it out.Show Image(http://uploads.tapatalk-cdn.com/20160503/f25a62d8bb43f1624d9df64fe1998a43.jpg)
the 1206 leds go on the bottom side of the pcb; with clear switch housing, the light shines through the switches and negates the need for in-switch ledsI want to be prepared when the plate and pcb will arrive, so what do I need for the backlight option of the pcb ?
you could use 1206 smd leds and have clear switch housings. it's quite nice.
i bought 100 white ones (http://www.ebay.com/itm/281968802883?_trksid=p2057872.m2749.l2649&var=580936284382&ssPageName=STRK%3AMEBIDX%3AIT) on ebay for $1.70. also planning on sip-socketing the switches, but idk what color leds i'm gonna put in the actual switch.
Do you have an image on how that would look like? I don't fully understand where you'd place this led and why it is dependant on "Clear switch housings" ?
Aaah alright, thank you for the response :) will have to look into that a bit further then!
Yes I have an image this is mine. I wanted to try it out.Show Image(http://uploads.tapatalk-cdn.com/20160503/f25a62d8bb43f1624d9df64fe1998a43.jpg)
Eek, so does that sit below the switch? No interference then?
Would like to try this but I don't think my tools are sufficient for the smd leds. Too small lol.
Prolly just stick to sip socket and leds haha.
All Quiet on the Eastern Front.
Some packages on the way.
I have drawn the winner of the Kosmonavt raffle. It will be a surprise in the package.
When someone's package ships do they receive a tracking number?
Did you get the blue plates yet? I need to know if should accelerate my parts buying.
Also, when your package arrives, please post pictures/videos/text and thoughts and mail me the links/post in this thread. I would love to see your projects!
Also, when your package arrives, please post pictures/videos/text and thoughts and mail me the links/post in this thread. I would love to see your projects!
Also, LeandreN, do let us know how much extra inventory you end up with. While waiting for this current project to come together, I've started work on a second and would love to get an extra set of plate/pcb/stabs if available. :)
http://imgur.com/a/nmbCj
Take a look!
http://imgur.com/a/nmbCj
Take a look!
http://imgur.com/a/nmbCj
Take a look!
http://imgur.com/a/nmbCj
Take a look!
I can't wait. I'm going with a black plate and the clear Tex acrylic case.
http://imgur.com/a/nmbCj
Take a look!
I can't wait. I'm going with a black plate and the clear Tex acrylic case.
I'm planning to use a black aluminum TEX-case. Are there any known issues with Nerd 60 and TEX-case?
http://imgur.com/a/nmbCj
Take a look!
http://imgur.com/a/nmbCj
Take a look!
Did you get the blue plates yet? I need to know if should accelerate my parts buying.
Negative. I am doing some colour modifications on them. They turned out a too light.
LeandreN, since the GB is running smooth and appearently ahead of schedule, can you tease us with more of this (http://i.imgur.com/llQHr0g.png)?Haha. Soon.
Yes. It will take a few more weeks before I get them.Did you get the blue plates yet? I need to know if should accelerate my parts buying.
Negative. I am doing some colour modifications on them. They turned out a too light.
Are those going to take much longer than other plates then since they're farther back in queue?
Your package went out yesterday, and I even remembered the Gateron blues.Already?
Your package went out yesterday, and I even remembered the Gateron blues.Already?Show Image(http://a1.files.blazepress.com/image/upload/c_fit,cs_srgb,dpr_1.0,q_80,w_620/MTI4OTk1MjQ4ODI2Mzg5Nzc4.jpg)
Nope. I have shipped a total of 10 packages.Your package went out yesterday, and I even remembered the Gateron blues.Already?Show Image(http://a1.files.blazepress.com/image/upload/c_fit,cs_srgb,dpr_1.0,q_80,w_620/MTI4OTk1MjQ4ODI2Mzg5Nzc4.jpg)
I think from manufacturer/gon to him
Nope. I have shipped a total of 10 packages.Your package went out yesterday, and I even remembered the Gateron blues.Already?Show Image(http://a1.files.blazepress.com/image/upload/c_fit,cs_srgb,dpr_1.0,q_80,w_620/MTI4OTk1MjQ4ODI2Mzg5Nzc4.jpg)
I think from manufacturer/gon to him
140 to go.
Just bought more shipping material today, since I had no more clear tape.
I don't have any case from Zip yet.Nope. I have shipped a total of 10 packages.Your package went out yesterday, and I even remembered the Gateron blues.Already?Show Image(http://a1.files.blazepress.com/image/upload/c_fit,cs_srgb,dpr_1.0,q_80,w_620/MTI4OTk1MjQ4ODI2Mzg5Nzc4.jpg)
I think from manufacturer/gon to him
140 to go.
Just bought more shipping material today, since I had no more clear tape.
Woa! that went fast!
Did you get the case that zip made for me as well? :D
I have shipped a total of 10 packages.Can't wait. I'll start heating up my soldering iron.
Show Image(http://i.imgur.com/AG6Defq.jpg)Show Image(http://i.imgur.com/ab6UwK5.jpg)Show Image(http://i.imgur.com/tGIfbds.jpg)Show Image(http://i.imgur.com/tGIfbds.jpg)Show Image(http://i.imgur.com/oW8SvM2.jpg)Show Image(http://i.imgur.com/vpgwALo.jpg)Show Image(http://i.imgur.com/qNYczqP.jpg)Show Image(http://i.imgur.com/7SPfPnH.jpg)
Thanks LeandreN!
12 of packages went out two days ago. I will be sending out more on wednesday next week due to Norwegian holidays.
There are a lot of work left, as I only can do 6-8 packages a day, there are 150 packages to ship. I have to pick parts, fold boxes, bubblewrap, tape addresses, doublecheck payments, weigh it, fill out customs form and tape the box. For tracked orders, I use about 30 minutes to pack one package because of all the paperwork, I will not be offering tracked in the future.
Blue plates will take a while before they are here, at least 20 more days.
The last PCBs are shipping now from GON.
LeandreN
LOL just got my order. LeandreN you're a legend. Still waiting for my first community GB ever to be fulfilled (Skidada+) while getting my second LeandreN GB delivered already.Awesome! Looking forward to some pictures!
:o I've been avoiding here because I didn't want to be overwhelmed....I'm overwhelmed. It's shiiiiippppiiiinggggg
Yeepee! Just received the two black plates, now I have everything to complete my First (two) custom builds :DAwesome. Looking forward to some pictures!
Thx a lot for this GB
:o I've been avoiding here because I didn't want to be overwhelmed....I'm overwhelmed. It's shiiiiippppiiiinggggg
soontm... i'm getting antsy for mine.
:o I've been avoiding here because I didn't want to be overwhelmed....I'm overwhelmed. It's shiiiiippppiiiinggggg
soontm... i'm getting antsy for mine.
i'm screeching with anticipation for mine. my neighbors have called the police four times on me now
Hey guys, can I source these RGB leds from mouser for underlighting?
http://www.mouser.com/ProductDetail/VCC/VAOL-S2223RGB/?qs=sGAEpiMZZMseGfSY3csMkatc7YIlwk%252bJ%252bWLzKPNjC6M%3d
Considering resistors should be presoldered, this is all I would need for underlighting right?
Hey guys, can I source these RGB leds from mouser for underlighting?
http://www.mouser.com/ProductDetail/VCC/VAOL-S2223RGB/?qs=sGAEpiMZZMseGfSY3csMkatc7YIlwk%252bJ%252bWLzKPNjC6M%3d
Considering resistors should be presoldered, this is all I would need for underlighting right?
I do not believe that the nerd 60 has the ability to control the rgb lights.
Show Image(http://i.imgur.com/AG6Defq.jpg)Show Image(http://i.imgur.com/ab6UwK5.jpg)Show Image(http://i.imgur.com/tGIfbds.jpg)Show Image(http://i.imgur.com/tGIfbds.jpg)Show Image(http://i.imgur.com/oW8SvM2.jpg)Show Image(http://i.imgur.com/vpgwALo.jpg)Show Image(http://i.imgur.com/qNYczqP.jpg)Show Image(http://i.imgur.com/7SPfPnH.jpg)
Thanks LeandreN!
Hey guys, can I source these RGB leds from mouser for underlighting?
http://www.mouser.com/ProductDetail/VCC/VAOL-S2223RGB/?qs=sGAEpiMZZMseGfSY3csMkatc7YIlwk%252bJ%252bWLzKPNjC6M%3d
Considering resistors should be presoldered, this is all I would need for underlighting right?
I do not believe that the nerd 60 has the ability to control the rgb lights.
Thanks for the clarification!
Hey guys, can I source these RGB leds from mouser for underlighting?
http://www.mouser.com/ProductDetail/VCC/VAOL-S2223RGB/?qs=sGAEpiMZZMseGfSY3csMkatc7YIlwk%252bJ%252bWLzKPNjC6M%3d
Considering resistors should be presoldered, this is all I would need for underlighting right?
I do not believe that the nerd 60 has the ability to control the rgb lights.
Thanks for the clarification!
yeah I actually, contacted gon himself and he verified we can't use RGB smd leds for underlighting on this board.
If it helps, I ordered these cyan SMD leds for this build.
http://www.aliexpress.com/item/100PC-Lot-SMD-1206-Ice-Blue-Led-Free-Shipping-WMDZ1206008/32321503753.html (http://www.aliexpress.com/item/100PC-Lot-SMD-1206-Ice-Blue-Led-Free-Shipping-WMDZ1206008/32321503753.html)
15 packages are shipped today!
Thanks! Everything from GON is in my hands now. He told me that he is working on his backlog.15 packages are shipped today!
Well done Sir, at the end I did not get in; but, I knew your GBs does great. It is even more impressive, considering you are using GON's parts, that it is known to keep some backlog with other customers.
Thanks! Everything from GON is in my hands now. He told me that he is working on his backlog.15 packages are shipped today!
Well done Sir, at the end I did not get in; but, I knew your GBs does great. It is even more impressive, considering you are using GON's parts, that it is known to keep some backlog with other customers.
yeah!?!?Show Image(https://cdn.meme.am/instances/400x/63072946.jpg)
i don't think i paid for tracking, and now i regret it. :'(Untracked. On the bright side, it's faster than tracked shipping.
i don't think i paid for tracking, and now i regret it. :'(Untracked. On the bright side, it's faster than tracked shipping.
i don't think i paid for tracking, and now i regret it. :'(Untracked. On the bright side, it's faster than tracked shipping.
will i know when it's been shipped? i just wanna know if my precious baby is being delivered by the stork.
i don't think i paid for tracking, and now i regret it. :'(Untracked. On the bright side, it's faster than tracked shipping.
will i know when it's been shipped? i just wanna know if my precious baby is being delivered by the stork.
Your package has shipped.
I'll have the honor to be the first to post a finished product from Round 4.
Excuse the potato pictures.
The Blackout 60%
(click to enlarge)Show Image(http://i.imgur.com/TBPUBUg.jpg)Show Image(http://i.imgur.com/2OUtk7T.jpg)Show Image(http://i.imgur.com/ILRg8ws.jpg)Show Image(http://i.imgur.com/mRlBLUz.jpg)Show Image(http://i.imgur.com/uXjQjcY.jpg)Show Image(http://i.imgur.com/g4puayC.jpg)Show Image(http://i.imgur.com/PHJsH7f.jpg)
Made with the following parts:
- PCB: GON Nerd 60% v2.2 LeandreN Edition.
- Plate: Universal 60% - designed by jdcarpe - provided by LeandreN.
- Switches: Cherry MX Black (not vintage) - harvested from a G80-3000.
- Case: Black aluminum 60% case - bought on Pexon's store (http://pexonpcs.co.uk/).
- Keycaps: Blank black Cherry profile - bought on Imsto's store (http://imsto.cn/).
I'll have the honor to be the first to post a finished product from Round 4.
Excuse the potato pictures.
The Blackout 60%
(click to enlarge)Show Image(http://i.imgur.com/TBPUBUg.jpg)Show Image(http://i.imgur.com/2OUtk7T.jpg)Show Image(http://i.imgur.com/ILRg8ws.jpg)Show Image(http://i.imgur.com/mRlBLUz.jpg)Show Image(http://i.imgur.com/uXjQjcY.jpg)Show Image(http://i.imgur.com/g4puayC.jpg)Show Image(http://i.imgur.com/PHJsH7f.jpg)
Made with the following parts:
- PCB: GON Nerd 60% v2.2 LeandreN Edition.
- Plate: Universal 60% - designed by jdcarpe - provided by LeandreN.
- Switches: Cherry MX Black (not vintage) - harvested from a G80-3000.
- Case: Black aluminum 60% case - bought on Pexon's store (http://pexonpcs.co.uk/).
- Keycaps: Blank black Cherry profile - bought on Imsto's store (http://imsto.cn/).
Beauty!Thank you. :)
Since you actually went with a long right shift, I really hope the Leandre key will stay there :)It's gonna sit on another keyboard, I have a total of three PCB left (2 GONs, 1 WKL.kr), you'll see it soon.
How fast was Imsto's shipping times ?5 weeks from order to delivery and I even ordered a custom dyesub.
I'll have the honor to be the first to post a finished product from Round 4.
Excuse the potato pictures.
The Blackout 60%
(click to enlarge)Show Image(http://i.imgur.com/TBPUBUg.jpg)Show Image(http://i.imgur.com/2OUtk7T.jpg)Show Image(http://i.imgur.com/ILRg8ws.jpg)Show Image(http://i.imgur.com/mRlBLUz.jpg)Show Image(http://i.imgur.com/uXjQjcY.jpg)Show Image(http://i.imgur.com/g4puayC.jpg)Show Image(http://i.imgur.com/PHJsH7f.jpg)
Made with the following parts:
- PCB: GON Nerd 60% v2.2 LeandreN Edition.
- Plate: Universal 60% - designed by jdcarpe - provided by LeandreN.
- Switches: Cherry MX Black (not vintage) - harvested from a G80-3000.
- Case: Black aluminum 60% case - bought on Pexon's store (http://pexonpcs.co.uk/).
- Keycaps: Blank black Cherry profile - bought on Imsto's store (http://imsto.cn/).
Looking good!Thank you. :)
May I ask which type of screw did you get to secure the pcb to the case?It came with stock Torx T6, but I replaced them with Phillips of the same size.
Oh does the PCB come screws?Looking good!Thank you. :)May I ask which type of screw did you get to secure the pcb to the case?It came with stock Torx T6, but I replaced them with Phillips of the same size.
Oh does the PCB come screws?No, the case does.
This is how a HHKB-like plate looks on GON's PCB.
There's been a discussion about universal cuts, I dare to say it looks beautiful with any layout.Show Image(http://i.imgur.com/lqngqVy.jpg)
You don't like stabilisers, do you? HahaIf only the ANSI Enter was 1.75u.
Might as well go for Atreus :))This is how a HHKB-like plate looks on GON's PCB.
There's been a discussion about universal cuts, I dare to say it looks beautiful with any layout.Show Image(http://i.imgur.com/lqngqVy.jpg)
You don't like stabilisers, do you? Haha
Okay, so I didn't ship out yesterday, but I did pack some packages. Packing some today, but I doubt I'll get them out before Monday. Thanks for your patience. I'm at about 60/140 packages now.
Assembled my second board today.Show Image(http://i.imgur.com/uXipXfW.jpg)
- PCB: Orange GON Nerd v2.2 LeandreN Edition
- Plate: HHKB-like red(dish) - designed by jdcarpe - provided by LeandreN
- Case: 60% plastic case, bought on Aliexpress
- Switches: Cherry MX Red
- Keycaps, alphas: Olivetti KBD 2812 HBI (Cherry G81-3011)
- Keycaps, mods: billnye's Electric Bluegaloo
Will eventually post more/better pictures tomorrow.
I actually wanted the HHKB style plate but I was worried how it would look like on a case like that with gaps on each side.Thanks. I guess you get a better result with a lipless case with matching color, but I'm happy anyway.
Turns out much better than I have imagined.
So so nice :D
Assembled my second board today.Show Image(http://i.imgur.com/uXipXfW.jpg)
- PCB: Orange GON Nerd v2.2 LeandreN Edition
- Plate: HHKB-like red(dish) - designed by jdcarpe - provided by LeandreN
- Case: 60% plastic case, bought on Aliexpress
- Switches: Cherry MX Red
- Keycaps, alphas: Olivetti KBD 2812 HBI (Cherry G81-3011)
- Keycaps, mods: billnye's Electric Bluegaloo
Will eventually post more/better pictures tomorrow.
Received mine today. Thanks for the free plate LeandreN. Not the best. But hey, its free! :))You didn't order a steel plate?
Received mine today. Thanks for the free plate LeandreN. Not the best. But hey, its free! :))You didn't order a steel plate?
It's better on the top side.
Received mine today. Thanks for the free plate LeandreN. Not the best. But hey, its free! :))You didn't order a steel plate?
It's better on the top side.
I did not. Was this plate even for me? Since I didn't even order any plate. :confused:
I am just trying to figure out if it was a mistake, or if we arranged this haha.Received mine today. Thanks for the free plate LeandreN. Not the best. But hey, its free! :))You didn't order a steel plate?
It's better on the top side.
I did not. Was this plate even for me? Since I didn't even order any plate. :confused:
Since it's my birthday tomorrow, i'll take this as a present from you, you're so nice LeandreN :)
Ohh so many people has been receiving them :eek:
Can't wait!
Show Image(http://i.imgur.com/QiPcjIB.jpg)
Received my items last night. I also have an orange PCB and and a black plate, but I wanted to build this setup first.Show Image(http://i.imgur.com/NzrABzf.jpg)
This was my first time doing side mounted leds and I was surprised at just how easy it was once I got one or two under my belt.Show Image(http://i.imgur.com/rPB0EHX.jpg)
65g zealios and top side leds mounted.
Unfortunately this is where I'm stuck until my dremel comes in so that I can mod the acrylic Tex case that I have so that it doesn't interfere with the side leds.
Show Image(http://i.imgur.com/QiPcjIB.jpg)
Received my items last night. I also have an orange PCB and and a black plate, but I wanted to build this setup first.Show Image(http://i.imgur.com/NzrABzf.jpg)
This was my first time doing side mounted leds and I was surprised at just how easy it was once I got one or two under my belt.Show Image(http://i.imgur.com/rPB0EHX.jpg)
65g zealios and top side leds mounted.
Unfortunately this is where I'm stuck until my dremel comes in so that I can mod the acrylic Tex case that I have so that it doesn't interfere with the side leds.
Oh boy those rear leds looks so good. Are they smd or just 2x3x4 leds?
Are they using their own resistors or you're sharing them with the switch leds?
Looks so nice. Too bad I'm using an alu case so any underglow would be wasted. :'(
Ah okay.Show Image(http://i.imgur.com/QiPcjIB.jpg)
Received my items last night. I also have an orange PCB and and a black plate, but I wanted to build this setup first.Show Image(http://i.imgur.com/NzrABzf.jpg)
This was my first time doing side mounted leds and I was surprised at just how easy it was once I got one or two under my belt.Show Image(http://i.imgur.com/rPB0EHX.jpg)
65g zealios and top side leds mounted.
Unfortunately this is where I'm stuck until my dremel comes in so that I can mod the acrylic Tex case that I have so that it doesn't interfere with the side leds.
Oh boy those rear leds looks so good. Are they smd or just 2x3x4 leds?
Are they using their own resistors or you're sharing them with the switch leds?
Looks so nice. Too bad I'm using an alu case so any underglow would be wasted. :'(
They are SMD leds and they do have their own resistors.
Sent from my iPhone using Tapatalk
The resistors were already soldered. I just had to do the LEDs.So you think 2x3x4 LEDs would do the job? I can solder it and bend them down I think.
Sent from my iPhone using Tapatalk
The resistors were already soldered. I just had to do the LEDs.So you think 2x3x4 LEDs would do the job? I can solder it and bend them down I think.
Sent from my iPhone using Tapatalk
Sent from my SM-G925F using Tapatalk
Hey man no worries. I'll check it out later when I receive it heh.The resistors were already soldered. I just had to do the LEDs.So you think 2x3x4 LEDs would do the job? I can solder it and bend them down I think.
Sent from my iPhone using Tapatalk
Sent from my SM-G925F using Tapatalk
I am not really sure. This was my first attempt at doing leds at all.
ya'll need more green in your life
ya'll need more green in your life
I almost want to get a custom anodized green plate for you, but i doubt it will be worth it.
Show Image(http://i.imgur.com/QiPcjIB.jpg)
Received my items last night. I also have an orange PCB and and a black plate, but I wanted to build this setup first.Show Image(http://i.imgur.com/NzrABzf.jpg)
This was my first time doing side mounted leds and I was surprised at just how easy it was once I got one or two under my belt.Show Image(http://i.imgur.com/rPB0EHX.jpg)
65g zealios and top side leds mounted.
Unfortunately this is where I'm stuck until my dremel comes in so that I can mod the acrylic Tex case that I have so that it doesn't interfere with the side leds.
Ooh, I see people have been receiving their orders. I can't remember if I asked for mine tracked and I saw someone else had the order shipped and wasn't notified. LeandreN, has mine shipped?
I'm excited.
Since we're postin finished stuff
~Lubed Gateron reds- First linear switch. I have found a new love.Show Image(http://i.imgur.com/oisCzTj.jpg)
and then the 'artsy' shotShow Image(http://i.imgur.com/tFFKRmW.jpg)
Also props to Leanre for getting the missing winkeyless plate mailed out today :thumb:
Hi. While we wait for LeandreN to ship all the packages, I thought I'd share my plans for a keyboard build I will do in the coming months.
I want to make a 60% "copy" of the Skidata KeyboardShow Image(http://i.imgur.com/Um0jYcZ.jpg)Show Image(http://i.imgur.com/i9RGaZT.png)
Thanks /u/Ziptyze !
I am going to use an orange PCB and probably a blue, or orange plate, depending on the case height.
Zealios, or Gateron Clears.
Thanks for looking.
every day i come home to check my mail box, and every day i am disappointed. any day now right? i just need to have a little bit of patience right????I'm at 80/140 excluding the blue plates.
every day i come home to check my mail box, and every day i am disappointed. any day now right? i just need to have a little bit of patience right????I'm at 80/140 excluding the blue plates.
:)
every day i come home to check my mail box, and every day i am disappointed. any day now right? i just need to have a little bit of patience right????I'm at 80/140 excluding the blue plates.
:)
Hi Leadren,
I have received mine today!
Very pleased with everything, the plate looks amazing.
Some pics here (sorry for the potato - imgur scaled it down so hard :-\)Show Image(http://i.imgur.com/rvMhswHl.jpg)Show Image(http://i.imgur.com/pxyGKIXl.jpg)Show Image(http://i.imgur.com/yhaKZ1Sl.jpg)
Mounted some switches on to see if it fits nicely and it does!
I'll be using 65g Zealio's for this build.
Thanks again for this GB, can't really ask for anything more.
;D
I shipped 20 packages today :O
Yeah, around that ecluding orders with blue plates.I shipped 20 packages today :O
100/140 excluding blues? Yay almost there!
I can't wait! Just wondering, if we paid for tracked shipping, do we get notified/emailed about a tracking number? (I think I paid for tracked but not 100% sure!)I'll send tracking numbers by mail tomorrow :)
I can't wait! Just wondering, if we paid for tracked shipping, do we get notified/emailed about a tracking number? (I think I paid for tracked but not 100% sure!)I'll send tracking numbers by mail tomorrow :)
Just received a whats app from my girlfriend.Show Image(http://i.imgur.com/FfDaZ2E.jpg)
Now I count the hours until I'm home.
Thanks LeandreN, my plate just arrived! :)Thanks for the update!
but... seen the pictures, i regret going with the steel plate... ;D :-[ :cool:
Thanks again LeandreN! I just finished putting together a build with the HHKB plate from this buy. I'm really happy with it. Excuse the potatoness.Looks fantastic. Thanks for postingShow Image(http://i.imgur.com/9P8aYdJ.jpg)
(Attachment Link)That LeandreN sticker. Hehe
(Attachment Link)
(Attachment Link)
- PCB: GON Nerd 60% v2.2 LeandreN Edition, orange
- Stabilizer: PCB mount, clipped and lubed
- Plate: Universal 60% LeandreN/jdcarpe, orange
- Switches: Zealios 78g
- Case: TEX aluminum 60% case, orange
- Keycaps: DSA Eve (temp solution, will be replaced at some point with Carbon SA/Carbon GMK, Yuri SA)
I want to go with an orange background lighting for my second build. I already have sourced the smd leds (1206). But didn't decide on a case yet. As I read in this thread that a tex acrylic case needs modification and I don't have tool to do this, here my question: Could somebody recommend me a good looking case for background lighting purposes?
I want to go with an orange background lighting for my second build. I already have sourced the smd leds (1206). But didn't decide on a case yet. As I read in this thread that a tex acrylic case needs modification and I don't have tool to do this, here my question: Could somebody recommend me a good looking case for background lighting purposes?
Why does the TEX case need modification? In my purple (lip less) TEX case the PCB with the plate fits without any problems.
I want to go with an orange background lighting for my second build. I already have sourced the smd leds (1206). But didn't decide on a case yet. As I read in this thread that a tex acrylic case needs modification and I don't have tool to do this, here my question: Could somebody recommend me a good looking case for background lighting purposes?
Why does the TEX case need modification? In my purple (lip less) TEX case the PCB with the plate fits without any problems.
See for example Portkins build. He mentioned that he needs to modify the case.
I want to go with an orange background lighting for my second build. I already have sourced the smd leds (1206). But didn't decide on a case yet. As I read in this thread that a tex acrylic case needs modification and I don't have tool to do this, here my question: Could somebody recommend me a good looking case for background lighting purposes?
Why does the TEX case need modification? In my purple (lip less) TEX case the PCB with the plate fits without any problems.
Finished mine ;D
I love it!
Lot of Pics:Show Image(http://i.imgur.com/Gv9mwmn.jpg)Show Image(http://i.imgur.com/VfOhwlX.jpg)Show Image(http://i.imgur.com/Zc2ymae.jpg)Show Image(http://i.imgur.com/wahxExz.jpg)Show Image(http://i.imgur.com/IEfxkwY.jpg)Show Image(http://i.imgur.com/3RLxFHA.jpg)Show Image(http://i.imgur.com/hOmsCab.jpg)Show Image(http://i.imgur.com/L7pCMVl.jpg)Show Image(http://i.imgur.com/IRkcY8c.jpg)Show Image(http://i.imgur.com/BUyvNJg.jpg)Show Image(http://i.imgur.com/jeFAwXM.jpg)Show Image(http://i.imgur.com/fHJqOjd.jpg)Show Image(http://i.imgur.com/P48lrCJ.jpg)Show Image(http://i.imgur.com/5mrzUH0.jpg)
Imgur Album (with Bonus gifs):
http://imgur.com/a/NfKXt (http://imgur.com/a/NfKXt)
Finished mine ;D
I love it!
Lot of Pics:Show Image(http://i.imgur.com/Gv9mwmn.jpg)Show Image(http://i.imgur.com/VfOhwlX.jpg)Show Image(http://i.imgur.com/Zc2ymae.jpg)Show Image(http://i.imgur.com/wahxExz.jpg)Show Image(http://i.imgur.com/IEfxkwY.jpg)Show Image(http://i.imgur.com/3RLxFHA.jpg)Show Image(http://i.imgur.com/hOmsCab.jpg)Show Image(http://i.imgur.com/L7pCMVl.jpg)Show Image(http://i.imgur.com/IRkcY8c.jpg)Show Image(http://i.imgur.com/BUyvNJg.jpg)Show Image(http://i.imgur.com/jeFAwXM.jpg)Show Image(http://i.imgur.com/fHJqOjd.jpg)Show Image(http://i.imgur.com/P48lrCJ.jpg)Show Image(http://i.imgur.com/5mrzUH0.jpg)
Imgur Album (with Bonus gifs):
http://imgur.com/a/NfKXt (http://imgur.com/a/NfKXt)
Does anyone know if this case (http://www.aliexpress.com/item/Wholesales-GH60-Anodizing-Aluminum-Case-for-60-Mechanical-Gaming-Keyboard-Compatible-Poker2-Pok3r-Faceu-60/32659884776.html?spm=2114.30010308.3.155.P0HgKQ&ws_ab_test=searchweb201556_8,searchweb201602_1_10037_10017_10021_507_10022_10032_10009_10020_10008_10018_10019_101,searchweb201603_9&btsid=f5edd74e-c0ce-4ad7-8803-0a58d24344da) is compatible with the PCB?
Got to be really close to getting mine now, super excited! Looks like the timing of this will line up perfectly with my Massdrop aluminium case. LeandreN, how many do you have remaining to post?
I am shipping 6 orders today.
I am shipping 6 orders today.
Any way to check if mine has been shipped (:
Your shipped a couple of days ago.
Curiosity is killing me and I don't know if I got tracking. May I ask if mine has shipped yet? I want to know if I should order my case and switches yet.Your name is pretty far down on the list, but you might be in the next shipment or two.
Thanks for the update. I hope to be in your future GB'sCuriosity is killing me and I don't know if I got tracking. May I ask if mine has shipped yet? I want to know if I should order my case and switches yet.Your name is pretty far down on the list, but you might be in the next shipment or two.
Nice color scheme. :thumb:Show Image(http://i.imgur.com/OjAxb7R.jpg)
My order came in! I spent all evening getting this beauty ready to go, because I had been too lazy in the past couple of months to clip the stabilisers and do the switch stem swaps...Show Image(http://i.imgur.com/lXCWpyU.jpg)
Plate, PCB, and stabilisers from here.
65g Zealistotles (they feel so good).
Tex aluminium case.
EnjoyPBT keycaps.
Edit: And if anyone knows how to do a Fn2 lock key on this PCB, I'd appreciate knowing. I see Fn2 and Fn2 No-lock on the GUI, but both appear to do the same thing.
10 packs out today. Just a few left before we have to wait for the blue plates.And round 5.
10 packs out today. Just a few left before we have to wait for the blue plates.And round 5.
10 packs out today. Just a few left before we have to wait for the blue plates.And round 5.
How I wish I would have hopped on this. Anyone have any spares?
Universal 60 plate, and GON pcb.
My order came in! I spent all evening getting this beauty ready to go, because I had been too lazy in the past couple of months to clip the stabilisers and do the switch stem swaps...Show Image(http://i.imgur.com/lXCWpyU.jpg)
Plate, PCB, and stabilisers from here.
65g Zealistotles (they feel so good).
Tex aluminium case.
EnjoyPBT keycaps.
Edit: And if anyone knows how to do a Fn2 lock key on this PCB, I'd appreciate knowing. I see Fn2 and Fn2 No-lock on the GUI, but both appear to do the same thing.
Select the regular fn2 and you double tap the key to lock it.
Fn2 nolock prevents it from locking when you press the key twice.
Sent from my iPhone using Tapatalk
Sorry, what's the price of the plate and PCB respectively? Any info on round 5 time?
Hey LeandreN,
thanks so much for doing this! is there anyway I can check my ETA without bothering you?
Can you tell me what I ordered, I forget....please :)
Can you tell me what I ordered, I forget....please :)
You ordered a black GON PCB, orange universal plate and some 6.25u stabilisers to go with.
Yes it has shipped.Can you tell me what I ordered, I forget....please :)
You ordered a black GON PCB, orange universal plate and some 6.25u stabilisers to go with.
Do you know if it has been shipped?
Yes it has shipped.Can you tell me what I ordered, I forget....please :)
You ordered a black GON PCB, orange universal plate and some 6.25u stabilisers to go with.
Do you know if it has been shipped?
Could you check if my order is already sent? I'm afraid that the German custom wouldn't message me if it's here...
Thank you!
Thanks for the quick replies today in email. Like I figured, once all the switches were mounted and the PCB was attached, everything is flat as Wyoming. Once I get everything soldered up I just have to wait for a case to come in and everything will be all done.
Could you check if my order is already sent? I'm afraid that the German custom wouldn't message me if it's here...
Thank you!
Yours have been sent :)
It was sent last week.Could you check if my order is already sent? I'm afraid that the German custom wouldn't message me if it's here...
Thank you!
Yours have been sent :)
Can you tell me when you did this? What is the approx. time to ship it to Germany? :rolleyes:
Thanks, then I'm not too concerned :)It was sent last week.Could you check if my order is already sent? I'm afraid that the German custom wouldn't message me if it's here...
Thank you!
Yours have been sent :)
Can you tell me when you did this? What is the approx. time to ship it to Germany? :rolleyes:
It should arrive sometime next week
Finally got to open my package, but I think my WKL plate is not properly cut. If I put my Enter switch to it's position, other switches won't fit; and vice versa. Please do correct me if I'm wrong :)Your plate is upside down :)
Images:MoreShow Image(http://i.imgur.com/3Kj8Gnv.jpg)Show Image(http://i.imgur.com/fUGzSyw.jpg)Show Image(http://i.imgur.com/wn1If4r.jpg)
Finally got to open my package, but I think my WKL plate is not properly cut. If I put my Enter switch to it's position, other switches won't fit; and vice versa. Please do correct me if I'm wrong :)Your plate is upside down :)
Images:MoreShow Image(http://i.imgur.com/3Kj8Gnv.jpg)Show Image(http://i.imgur.com/fUGzSyw.jpg)Show Image(http://i.imgur.com/wn1If4r.jpg)
My keyboard project : https://geekhack.org/index.php?topic=82151.0Show Image(http://i.imgur.com/eqBtJbL.jpg)
Hey LeandreN,
Could you tell me if mine has shipped yet?
Thank you!Hey LeandreN,
Could you tell me if mine has shipped yet?
Your order has shipped.
when green plates :DActually, I almost ordered some with the parts I'm waiting for, but that would delay the shipment more, and I didn't want that.
when green plates :DActually, I almost ordered some with the parts I'm waiting for, but that would delay the shipment more, and I didn't want that.
Yes. I hope to have the store fully stocked with a lot of options.when green plates :DActually, I almost ordered some with the parts I'm waiting for, but that would delay the shipment more, and I didn't want that.
Any chance for other plate materials in the future? Like acrylic or more carbon fiber?
when green plates :DActually, I almost ordered some with the parts I'm waiting for, but that would delay the shipment more, and I didn't want that.
Recieved my package aswell today. Here is some pictures:Show Image(http://i.imgur.com/rcXu1IV.jpg)
78g ZealiosShow Image(http://i.imgur.com/oyyBj2y.jpg)Show Image(http://i.imgur.com/BtiEnqG.jpg)Show Image(http://i.imgur.com/Q2OVsDg.jpg)
Unfortunately I recieved the wrong plate so this built is on hold for a while.Show Image(http://i.imgur.com/EgdtlgK.jpg)Show Image(http://i.imgur.com/oKjYjAB.jpg)
A sticker was not included in the box. I demand a refund! :D
Thanks LeandreNShow Image(http://i.imgur.com/LQdXZtN.jpg)Show Image(http://i.imgur.com/MNlM0lZ.jpg)
Show Image(http://i.imgur.com/WQz3rIB.jpg)
Build log: http://imgur.com/a/6IazB
Typing video:
Show Image(http://i.imgur.com/WQz3rIB.jpg)
Build log: http://imgur.com/a/6IazB
Typing video:
great build! I was actually thinking of ordering the same case from taobao + the weight. are you thinking of using underglow for this board in the future?
Show Image(http://i.imgur.com/WQz3rIB.jpg)
Build log: http://imgur.com/a/6IazB
Typing video:
great build! I was actually thinking of ordering the same case from taobao + the weight. are you thinking of using underglow for this board in the future?
I'm probably going to leave this build how it is, but I'd love to do another one with another LeandreN kit and give underglow a go, and maybe use a frosted acrylic case from Taobao. Another build is an excuse to keep collecting keysets.
Status:
10 orders need to be shipped next week.
Rest of the orders (20-30) will ship when we have the blue plates.
------
I will hopefully (not 100% sure) do a small run with new higher quality sandblasted steel plates. They will have the finish in the picture.
They are just prototypes and won't be sampled. We do know the design works.
10 plates will be available at 20$ + a small shipping fee. They are prototypes and should be better than the steel plates that were offered in this round in terms of look, I have heard your feedback and wanted to get some steel plates with less burn marks, less steel bits, more softer edges and eliminate the bad brushing work.
Email me: support@leandrekeyboards.com if you want one. Include FULL address, PayPal.Show Image(http://uploads.tapatalk-cdn.com/20160610/482e4745ff25d12459942afef66502f3.jpg)
Any update/ETA on the blue plates?2 weeks before shipment.
Are there any spare black PCBs? I only see orange on your website.Only orange as of now. I will get a few black once later if everything goes smoothly.
It's the universal 60 design from JDcarpe.Status:
10 orders need to be shipped next week.
Rest of the orders (20-30) will ship when we have the blue plates.
------
I will hopefully (not 100% sure) do a small run with new higher quality sandblasted steel plates. They will have the finish in the picture.
They are just prototypes and won't be sampled. We do know the design works.
10 plates will be available at 20$ + a small shipping fee. They are prototypes and should be better than the steel plates that were offered in this round in terms of look, I have heard your feedback and wanted to get some steel plates with less burn marks, less steel bits, more softer edges and eliminate the bad brushing work.
Email me: support@leandrekeyboards.com if you want one. Include FULL address, PayPal.Show Image(http://uploads.tapatalk-cdn.com/20160610/482e4745ff25d12459942afef66502f3.jpg)
Emailed. What layout option is available?
Status:
10 orders need to be shipped next week.
Rest of the orders (20-30) will ship when we have the blue plates.
------
I will hopefully (not 100% sure) do a small run with new higher quality sandblasted steel plates. They will have the finish in the picture.
They are just prototypes and won't be sampled. We do know the design works.
10 plates will be available at 20$ + a small shipping fee. They are prototypes and should be better than the steel plates that were offered in this round in terms of look, I have heard your feedback and wanted to get some steel plates with less burn marks, less steel bits, more softer edges and eliminate the bad brushing work.
Email me: support@leandrekeyboards.com if you want one. Include FULL address, PayPal.
Hey Leandre, do you know if my order has been shipped? I didn't ask for tracking and didn't order a blue plate.
Also, anyone have an extra black PCB available?
Hey Leandre, do you know if my order has been shipped? I didn't ask for tracking and didn't order a blue plate.
Also, anyone have an extra black PCB available?
Your order has shipped.
I have no extra black PCBs atm
A sticker was not included in the box. I demand a refund! :D
Thanks LeandreNShow Image(http://i.imgur.com/LQdXZtN.jpg)Show Image(http://i.imgur.com/MNlM0lZ.jpg)
Recieved my package aswell today. Here is some pictures:Show Image(http://i.imgur.com/rcXu1IV.jpg)
78g ZealiosShow Image(http://i.imgur.com/oyyBj2y.jpg)Show Image(http://i.imgur.com/BtiEnqG.jpg)Show Image(http://i.imgur.com/Q2OVsDg.jpg)
Unfortunately I recieved the wrong plate so this built is on hold for a while.Show Image(http://i.imgur.com/EgdtlgK.jpg)Show Image(http://i.imgur.com/oKjYjAB.jpg)
Does anyone have a spare stabiliser 7u wireI can bend wires, they are not perfectly straight but they do the job.
Does anyone have a spare stabiliser 7u wireI can bend wires, they are not perfectly straight but they do the job.Show Image(http://i.imgur.com/utL6eU4.jpg)Show Image(http://i.imgur.com/Nm6Lzrs.jpg)
What's the diameter? Might even try it out myself :)Around 1,8 mm.
Does anyone have a spare stabiliser 7u wireI can bend wires, they are not perfectly straight but they do the job.Show Image(http://i.imgur.com/utL6eU4.jpg)Show Image(http://i.imgur.com/Nm6Lzrs.jpg)
May I ask what wire are these? I might just get them and bend them myself. :)Plain iron wire bought at a local hardware store. It comes in a spool hence it's not straight.
Hi!
I have not shipped much today and yesterday, because I am sick and was quite busy.
I will get the rest of the packages out this weekend.
Also, the blue plates MIGHT be here next week, which is fantastic news.
Sorry about the small delay there, and sorry about the delay overall(if you had known the paperwork I most through to ship tracked orders).
I am talking to DHL, so I might get a deal there for future group buys.
Thanks for leaving me feedback here:
https://docs.google.com/forms/d/1uBzPkIcpTixHD2JVtIDaGSJ7rPPb4Qg2qaoe_eG-etY/viewform#responses
Hi Leandren, any left over for universal plate?
Leandre, for the untracked option, how long is it expected to take to reach USA?Oops, looks like they came in while out of town, and my father forgot to mention it.
But we do have a potential problem here. I don't know if it is meant to be this way, but the carbon fiber plate I received seems to have a small disconnect on the right side by the shift. Here are some photos.Show Image(http://i.imgur.com/CwxTDsk.jpg)Show Image(http://i.imgur.com/uQ9YpRw.jpg)Show Image(http://i.imgur.com/g3gprcG.jpg)
Is this normal?
Leandre, for the untracked option, how long is it expected to take to reach USA?Oops, looks like they came in while out of town, and my father forgot to mention it.
But we do have a potential problem here. I don't know if it is meant to be this way, but the carbon fiber plate I received seems to have a small disconnect on the right side by the shift. Here are some photos.Show Image(http://i.imgur.com/CwxTDsk.jpg)Show Image(http://i.imgur.com/uQ9YpRw.jpg)Show Image(http://i.imgur.com/g3gprcG.jpg)
Is this normal?Show Image(http://i.imgur.com/4XM6GqZ.gif)
Yes it is a part of the file to allow for all the layouts.
thanks LeandreN, JDCarpe, and TalkingTree!:rolleyes: Uh, you're welcome, I guess.
thanks LeandreN, JDCarpe, and TalkingTree!:rolleyes: Uh, you're welcome, I guess.
I had a problem with some switches not registering and turned out i had to re solder the switches. Maybe check you solder points?
I am also having a weird issue with key press's not registering. It's like if I press a switch too fast it doesn't register. Here is a link to a video that shows the issue... Maybe someone has seen this before and can point me in the right direction to resolve it?
I am also having a weird issue with key press's not registering. It's like if I press a switch too fast it doesn't register. Here is a link to a video that shows the issue... Maybe someone has seen this before and can point me in the right direction to resolve it?
It would be helpful to see a picture of the back of the PCB (close up with good lighting) so we can see the solders. A bad solder (cold solder, too much/too little solder, etc) could easily be the culprit, or the switch itself could be malfunctioning. In either case the solution is pretty simple, desolder the switch and replace it or just try resoldering.
I had a problem with some switches not registering and turned out i had to re solder the switches. Maybe check you solder points?
I already did double check my soldering nothing seems to be loose. I can recreate this issue with any switch on the board though so I don't think its a soldering issue unless I somehow messed up every single switch.
I had a problem with some switches not registering and turned out i had to re solder the switches. Maybe check you solder points?
I already did double check my soldering nothing seems to be loose. I can recreate this issue with any switch on the board though so I don't think its a soldering issue unless I somehow messed up every single switch.
Ignore my last post, hadn't seen your reply. Doesn't sound like a soldering issue (unless the PCB or USB connector got damaged).
Just thinking of trouble shooting steps: have you tried a different USC cable or tried the keyboard on a different computer?
It also could be a firmware issue on the board. I think these PCBs have a setting for NKRO you could check, or try flashing the firmware again (not sure how to do that on these though).
Update
Hi!
I have the blue plates now, but I am on vacation and waiting for some more money from PayPal.
I managed to ship 4 of the blue orders.
LeandreN
My keycaps finally came in and I put together the matching USB cable. This has come together quite nice I think. Figured out the issue with keys registering too... I just had to change the NKRO setting.
(Attachment Link)
(Attachment Link)
(Attachment Link)
Still dreaming of green :'(Do you want iron powder coated, in green?
Still dreaming of green :'(Do you want iron powder coated, in green?
Because I am very near buying some iron plate prototypes ;)
If you send the Pantone of the green you want to use, that would be fantastic.Still dreaming of green :'(Do you want iron powder coated, in green?
Because I am very near buying some iron plate prototypes ;)
No experience with powder coated stuff butttttttt I don't really have any better options so it'll depend on the price :D
Shipped 😃
Just to check (because I payed late), am I on the shipped list? (blue plate, stabs, no PCBs)
LeandreN: Does that include the steel plates mini buy?Nope. Those will ship later.
N3RDLY: Where in the world are you and which weight Zealio are you short of?
Any leftovers, especially black? I had sent an email a while ago, but it's possible that got lost somewhere.Can you send it again?
Any leftovers, especially black? I had sent an email a while ago, but it's possible that got lost somewhere.Can you send it again?
MoreShow Image(http://i.imgur.com/5SgaUtU.jpg)
MoreShow Image(http://i.imgur.com/5SgaUtU.jpg)
What case is that?
Looking for a black GON Nerd 60. Please let me know if you happen to have an extra you are willing to give up. I sadly made the mistake of selling my slot.Not Leandren but asked the same question in email. He has spare black pcb's that he's going to sell on his new shop, which is currently under construction.
Thanks :)Looking for a black GON Nerd 60. Please let me know if you happen to have an extra you are willing to give up. I sadly made the mistake of selling my slot.Not Leandren but asked the same question in email. He has spare black pcb's that he's going to sell on his new shop, which is currently under construction.
Finally moved my ass to build it. Tired of lubing each switches, I failed to put switches onto the plate with the right layout. Had to do 1 soldering job but bent/scratch a little bit the plate.Show Image(http://imgur.com/mll9nAr)Show Image(http://i.imgur.com/RVZjIfs.jpg)Show Image(http://i.imgur.com/6HTUnd5.jpg)Show Image(http://i.imgur.com/mJ0RLwK.jpg)
It's HEAVY AF
Changed keycap to Gateron Ghost White and maybe will add Blue Inswitch LED.
Thanks again Leandren !
very nice
Looks like I'm the winner of the raffle! Thanks LeandreN!! Waiting on switches and will update with pictures of my build next week.
(Attachment Link)
(Attachment Link)
Looks like I'm the winner of the raffle! Thanks LeandreN!! Waiting on switches and will update with pictures of my build next week.
(Attachment Link)
(Attachment Link)
Congratulations! Make sure to post pictures of the completed build too.
Did the steel plates ship?Yes.
Did the steel plates ship?Yes.
(Attachment Link)
So, I jumped in for a set of WKL ANSI
I have a few questions... since I hopped on this, I'm hoping to build my absolute dream layout which actually showed up on a simple google search..Show Image(https://i.ytimg.com/vi/7faAcDTwMrE/maxresdefault.jpg)
Assuming I want to build something similar to this... can anyone point me in the direction of what I need to look for to make this a reality?
I need a custom PCB that supports 1.5 modifiers and a stepped capslock, and a 7u(?) spacebar with matching stabilizers?
If I can see correctly, I'm also a part of the EnjoyPBT GB for a purple set and a CMY modifier, will all those caps fit this build?
Sorry if I'm asking any questions already being answered, I just want to know what I'm getting into!
Thank you!!
Edit: If there is anyone available to help me figure out what I need to do that wants to PM me instead of cluttering this thread up, that would be appreciated as well!
dude sick, hahaha. searching on google yielded your keyboard. I've already put mine together and am now currently waiting on the keycaps :) once its done i'll post it here
dude sick, hahaha. searching on google yielded your keyboard. I've already put mine together and am now currently waiting on the keycaps :) once its done i'll post it here
Cool. I think it showed up because I posted a typing video on youtube a while ago, as well as a post on r/mk. So did you make yours "winkeyless" as well (there are actually switches there, but the PMK switch blockers cover them)?
has anyone here not yet received their order yet? mine has yet to show up...We are in contact and will resolve this issue.
Now, should we start planning R5 soon?
- It will be run under Mekanisk.co
- GON, light blue PCBs(?)
- plates, new steel plates, different CF types, aluminium
- stabilisers
What do you want?
No, I am not going to run 75% or 100% yet.
Now, should we start planning R5 soon?I'm looking forward to round five! I've been looking forward to building a custom 60. I've heard so many great things about your work, LeandreN. I believe a full kit from you is better than the KC60 too. Well, I hope to be ready when round five starts!
- It will be run under Mekanisk.co
- GON, light blue PCBs(?)
- plates, new steel plates, different CF types, aluminium
- stabilisers
What do you want?
No, I am not going to run 75% or 100% yet.
GREEN
Now, should we start planning R5 soon?
- It will be run under Mekanisk.co
- GON, light blue PCBs(?)
- plates, new steel plates, different CF types, aluminium
- stabilisers
What do you want?
No, I am not going to run 75% or 100% yet.
Now, should we start planning R5 soon?Custom plates of painted steel and cases.
Now, should we start planning R5 soon?
- It will be run under Mekanisk.co
- GON, light blue PCBs(?)
- plates, new steel plates, different CF types, aluminium
- stabilisers
What do you want?
No, I am not going to run 75% or 100% yet.
Now, should we start planning R5 soon?
- It will be run under Mekanisk.co
- GON, light blue PCBs(?)
- plates, new steel plates, different CF types, aluminium
- stabilisers
What do you want?
No, I am not going to run 75% or 100% yet.
Now, should we start planning R5 soon?
- It will be run under Mekanisk.co
- GON, light blue PCBs(?)
- plates, new steel plates, different CF types, aluminium
- stabilisers
What do you want?
No, I am not going to run 75% or 100% yet.
Yeah that would be interesting to tinker with :)Now, should we start planning R5 soon?
- It will be run under Mekanisk.co
- GON, light blue PCBs(?)
- plates, new steel plates, different CF types, aluminium
- stabilisers
What do you want?
No, I am not going to run 75% or 100% yet.
Any chance on getting the bluetooth module? Would like to BT my orange PCB!
Yeah that would be interesting to tinker with :)Now, should we start planning R5 soon?
- It will be run under Mekanisk.co
- GON, light blue PCBs(?)
- plates, new steel plates, different CF types, aluminium
- stabilisers
What do you want?
No, I am not going to run 75% or 100% yet.
Any chance on getting the bluetooth module? Would like to BT my orange PCB!
Finally got around building my second keyboard. Very happy with it, need to do a photoshoot...
Anyway: can someone explain the special keymap "Backlight LED" to me? I don't quite get it. Can it actually be used to change the Dedicated Mode (from Breathing to Always on for example)? It only seems to switch the Link of the backlight LEDs (Fn, Dedicated, Always off) but even then there seems to be something missing, I'm quite confused. Is it possible to have it on "Faster Typing, Brighter LEDs" and also on "Always on" when a Fn Layer is active? That would be my favourite mode I suppose...
i need these HHKB plates in my life. hope they come again in a future round!
I posted a little poll for the colours for the next run. I am working on setting up a GB thread for round 5 soon. Hopefully, a lot of you will join in on this GB, we sure have some fantastic things this time around. Stay tuned!
I hope to start it in a couple of weeks and have it open for 3 weeks :)I posted a little poll for the colours for the next run. I am working on setting up a GB thread for round 5 soon. Hopefully, a lot of you will join in on this GB, we sure have some fantastic things this time around. Stay tuned!
How long will the GB period be? I need to budget myself so I'd appreciate if you could share any idea what the rough timeframes are like, helps with timing my other purchases
I hope to start it in a couple of weeks and have it open for 3 weeks :)I posted a little poll for the colours for the next run. I am working on setting up a GB thread for round 5 soon. Hopefully, a lot of you will join in on this GB, we sure have some fantastic things this time around. Stay tuned!
How long will the GB period be? I need to budget myself so I'd appreciate if you could share any idea what the rough timeframes are like, helps with timing my other purchases
Yes, it does like like that.I hope to start it in a couple of weeks and have it open for 3 weeks :)I posted a little poll for the colours for the next run. I am working on setting up a GB thread for round 5 soon. Hopefully, a lot of you will join in on this GB, we sure have some fantastic things this time around. Stay tuned!
How long will the GB period be? I need to budget myself so I'd appreciate if you could share any idea what the rough timeframes are like, helps with timing my other purchases
Thanks, I can make that work :thumb:
Looking forward to it! The PCBs will be from GON like R4 right?
Voted lime green and mint blue. What's the point in voting for a colour you can get elsewhere?
RAINBOW PCB.Voted lime green and mint blue. What's the point in voting for a colour you can get elsewhere?
We are going to have 2 colours. One neutral and one unusual colour.
Voted lime green and mint blue. What's the point in voting for a colour you can get elsewhere?
We are going to have 2 colours. One neutral and one unusual colour.
Voted lime green and mint blue. What's the point in voting for a colour you can get elsewhere?
We are going to have 2 colours. One neutral and one unusual colour.
Voted lime green and mint blue. What's the point in voting for a colour you can get elsewhere?
We are going to have 2 colours. One neutral and one unusual colour.
In that case I would go for mint blue and white.
Voted lime green and mint blue. What's the point in voting for a colour you can get elsewhere?
We are going to have 2 colours. One neutral and one unusual colour.
In that case I would go for mint blue and white.
That is what I am leaning against.
https://geekhack.org/index.php?topic=84454.0Send in a support ticket at support@mekanisk.co.
Please check out this thread!
Sorry for the thread necromancy, but my question is relevant to Round 4. So I bought an orange PCB through this GB back in Feb and received it on time in May-ish I think. I only now collected all the parts required to build my KB (thanks massdrop) and started to build. I'm dismayed to find that the bottom 3 keys on the PCB fail the paper clip test when tested with AquaKeyTest. I cannot see any visible damage to the PCB around those bottom 3 keys.
Is this something that's by design on GoN NERD keyboards, or do I have a bum? :(
This is very rare with GoN PCBs, but something may have been shorted somewhere.
Sorry for the thread necromancy, but my question is relevant to Round 4. So I bought an orange PCB through this GB back in Feb and received it on time in May-ish I think. I only now collected all the parts required to build my KB (thanks massdrop) and started to build. I'm dismayed to find that the bottom 3 keys on the PCB fail the paper clip test when tested with AquaKeyTest. I cannot see any visible damage to the PCB around those bottom 3 keys.
Is this something that's by design on GoN NERD keyboards, or do I have a bum? :(
Purple or orange!
(http://i.imgur.com/50RMP4yh.jpg) (http://imgur.com/50RMP4y)That's sick!
(http://i.imgur.com/50RMP4yh.jpg) (http://imgur.com/50RMP4y)That's sick!
This is not my CF plate. Mine supports more layouts :)(http://i.imgur.com/50RMP4yh.jpg) (http://imgur.com/50RMP4y)That's sick!
Carbon fiber plate looks really good. When do you restock it in your shop?
Better late than never. My second build from this GB. Full album: http://imgur.com/nWbfj (http://imgur.com/nWbfj).
(Attachment Link)