geekhack Marketplace > Group Buys and Preorders
[GB] Pegasus - 40% WKL Keyboard | GB Complete. Extras on 1/25.
MelonBred:
Pegasus
40% WKL Keyboard
Technical Specifications
- 12.75u Layout with 0.75u "WKL" Blockers
- 4-piece case | 6063 aluminum case, polished stainless steel or raw brass weight
- Mounting Method | sandwiched integrated half plate + poron foam strips.
- Typing Angle = 6
- Effective Key Height = 24.2 mm
- Soldered PCB powered by Atmega 32u4 and C3 unified daughterboard
- Support for 6.25u spacebar and 2u/2.25u split spacebar
- Optional rotary encoder support
- Flex cut on the PCB between 2nd and 3rd rows
- QMK / Vial support (Vial will be preflashed on the PCB)
Supported Layouts
Release Information
Vendor | P3D Store (Product Page)
Unlimited Group Buy
Dates | May 21st - July 1st
Expected Delivery | Q4 2022
Colour Options:
* Top - Black, E-White, Red, Indian Teal, Grape
* Please note, final color samples of Indian Teal and Grape are arriving prior to group buy. This thread and the product page will be updated when these colors arrive
* [2022/05/20] Final color samples for Indian Teal and Grape have arrived. Please see the product page!
* Plate / Bottom - Black
* Weight - Polished Stainless Steel, Raw Brass
* In-house Cerakote service will be made available. See product page or pricing section below for more information.
Included in Pegasus Kit
1x Top | anodized or e-coating (white)
1x Plate | anodized
1x Bottom | anodized
1x Weight | polished stainless steel or raw brass
1x PCB (soldered), JST cable, C3 unified daughterboard
4x bumpons
1x screw and accessory bag
Pricing
Pegasus Keyboard Kit - $350 (US domestic shipping included)
International DHL Express Shipping
* Canada | +$30
* Rest of the World | +$40
* If the shipping price does not match the +$30 for Canada and +$40 for the rest of the world, please place your order and contact P3D store by email for a partial shipping refund. We greatly apologize for the inconvenience. Support email: support@p3dstore.com
Cearkote Options
Single Color | $25 per piece
Multi Color | $35 per piece
Extra Add-Ons
Anodized or E-White Top | Product Page | $70
Black Anodized Switch Plate | $60
PCB (no daughterboard) | $40
Black EVA Plate Foam | $10
Black EVA Caes Foam | $10
Rotary Encoder | $4
Content
- XinXinWong | Build stream on May 21st, 6:00pm PDT | VOD | Typing Test
- Hedgey | Build stream on May 26th, 6:00pm PDT | VOD | Typing Test
- StrayChroma | Build stream on June 24th, 1:00pm PDT | VOD
- R1 Prototype Typing Test | by Sumthing
Frequently Asked Questions
1. Where will this be shipping from?
Minnesota, USA.
2. Will there be any other vendors?
No. P3D Store is the worldwide vendor for this project.
3. What's the expected fulfillment timeline?
We are expecting 4 months from the time of group buy close. This will vary based on how COVID-19 regulations may change in China.
4. Is there a way to get notified of when the group buy starts?
Yes! Please sign up for the email notification on the bottom of the product page linked above.
5. Will custom cerakote orders ship after standard colors ship?
Yes. We expect cerakote orders will ship a few weeks after standard colors ship. This timeline may vary depending on how many cerakote orders and unique colors there are. We will have a better idea after the group buy closes.
6. Why is the brass offered as raw/uncoated?
Many folks expressed interest in raw brass to force patina their weights. However, a coated option will be offered at group buy.
7. What cerakote options are available?
Please refer to the Cerakote Color Gallery on P3Dstore.com
More information on this project can be found in the interest check thread.
MelonBred:
Reserved for Updates
[2022-05-26]
Rotary encoder cost changed from $3 to $4. The encoder that is offered is now a detentless encoder and are a nicer size to fit this board better. We apologize for the last minute change and miscommunication.
[2022-08-01]
First monthly update is here:
Cases: invoice paid and in production
PCBs: invoice paid and in production
Hardware & accessories: ordered
All emails for the folks that selected the cerakote options have been sent out. Please reply to that email with your desired cerakote color/scheme when you get a chance. If you selected cerakote and have not received an email, please let us know!
[2022-09-01]
Cases: In progress. Most of the machining has been completed. Surface treatment to start soon. However, there might be a slight delay due to some covid lockdowns. We're still tracking pretty well on timeline though.
PCBs: Received
Hardware & accessories: Received.
P3D has received PCBs and hardware/accessories. Just waiting on cases at this point, and seems like the manu is cruising through. We'll provide more info when surface treatment is completed and they're on the way to P3D.
[2022-10-01]
Cases: In progress. Only the tops in red and e-white still need to go through surface treatment. Manu is expecting to ship in a couple of weeks. However, China National Holiday is currently going on through the 7th and factories are still dealing with intermittent covid-19 quaranties. Will updated once cases have shipped to P3D.
PCBs: Received
Hardware & accessories: Received.
[2022-11-02]
Cases have been shipped from the manu and heading their way to P3D with an estimated delivery of 14 days. Hopefully they arrive a bit earlier so P3D can tackle QC and packing. The goal is to get the non-cerakoted orders out by the end of November. Cerakote orders will take some additional time, and our target for that is a few weeks after receiving the cases.
Please note that these are not set time frames and are only estimates. We're super close though, and we're stoked to get these into your hands! Thanks for all your patience throughout this group buy.
[2023-01-23]
All group buy orders have shipped! Extras go on sale on 1/23!
See the following post for details:
https://geekhack.org/index.php?topic=117226.msg3152614#msg3152614
dededecline:
Excited this is finally a reality, GLWGB MB!
dededecline:
--- Quote from: chat and team on Sun, 15 May 2022, 17:52:41 ---plate for 60 lol what
--- End quote ---
look at the design. plate is milled and basically a second top piece
MelonBred:
--- Quote from: chat and team on Sun, 15 May 2022, 17:52:41 ---plate for 60 lol what
--- End quote ---
Following up with what dededecline said, the half-plate is integrated into the raised, inner bezel and 0.75u blockers. Please see the product photos and tech spec document for your reference. Due to this design, the plate is not cheap to manufacturer. Hope that helps explain why the extra plates are $60. Let us know if there's anything else that may be unclear.
Navigation
[0] Message Index
[#] Next page
Go to full version