« previous next »
Pages: « 1 2 3 4 5 6 [7] 8 9 10 11 12 ... 29 »   Go Down

Author Topic: [GB] Phantom Parts and Assembly Services (Update Posted 2018/07/23)  (Read 303187 times)

0 Members and 1 Guest are viewing this topic.

Offline Gupgup

  • * Vendor
  • Posts: 584
  • Location: South Dakota, US
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #300 on: Tue, 15 January 2013, 21:52:56 »
If you could, could you give me a brief explanation of what the Cherry Stabilizers do? I just want to be sure that I'd like them before they're on :) Thanks!!
Logged

Offline TheProfosist

  • Thread Starter
  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #301 on: Tue, 15 January 2013, 21:55:19 »
Quote from: Gupgup on Tue, 15 January 2013, 21:52:56
If you could, could you give me a brief explanation of what the Cherry Stabilizers do? I just want to be sure that I'd like them before they're on :) Thanks!!
they stabilize the 2x+ width keys so when you press on one side the other side goes down
Logged

Offline TheProfosist

  • Thread Starter
  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #302 on: Wed, 16 January 2013, 13:38:46 »
MXCLEAR now on BACKORDER!
« Last Edit: Wed, 16 January 2013, 13:40:23 by TheProfosist »
Logged

Offline TheProfosist

  • Thread Starter
  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #303 on: Wed, 16 January 2013, 13:45:45 »
Quote from: TheProfosist on Wed, 16 January 2013, 13:38:46
MXCLEAR now on BACKORDER!
OP and Form updated to reflect this
Logged

Offline Glod

  • * Elevated Elder
  • Posts: 1998
  • Location: Virginia, USA
  • Also Known As Ergonomech
    • YouTube Channel
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #304 on: Wed, 16 January 2013, 13:55:51 »
that was quick, glad i put mine in early, i'm guessing back order means future requests are back order, i'm still good?

maybe at some point you should post what your total order looks like so far or something as people put in their orders, i dunno how i should say it, some tally or something. I'm interested in how many plates, PLU, and switches your having to order. More of my curiosity than a requirement....


Logged

Offline TheProfosist

  • Thread Starter
  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #305 on: Wed, 16 January 2013, 14:03:53 »
Quote from: Glod on Wed, 16 January 2013, 13:55:51
that was quick, glad i put mine in early, i'm guessing back order means future requests are back order, i'm still good?

maybe at some point you should post what your total order looks like so far or something as people put in their orders, i dunno how i should say it, some tally or something. I'm interested in how many plates, PLU, and switches your having to order. More of my curiosity than a requirement....



yes that is what that means and yes i made notes in the speadsheet about when the in stock stuff has run out so that I know exactly who gets what

ill do it possibly tonight


also people dont forget that you can  still order switches ad they will be guarenteed at this price now

blacksd should be added later today a different source was found for them thanks alaricljs
Logged

Offline KuhnTang

  • Posts: 540
  • Location: San Diego, CA
  • Game of Thrones
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #306 on: Wed, 16 January 2013, 17:11:04 »
Prof,

I want to add 20 MX Grey's to my order, I ordered before that was an option.  Should I fill out another form, or can you edit my existing order?  I don't want to order again and lose my place in line on the clears and whites.

Do I have the ability to view my order?

I'm pretty sure since I got my order in the day the form went up, but can you confirm that I got in before these switches were placed on backorder?

Thanks
Logged

Offline Gupgup

  • * Vendor
  • Posts: 584
  • Location: South Dakota, US
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #307 on: Wed, 16 January 2013, 17:17:03 »
How long do you think that the backorder for MX Whites will take? Thinking about changing my PLU board to reds also, but it depends on how long the wait will be for some whites :)

Thanks Prof, props for doing all this work!
Logged

Offline longweight

  • philanthropist
  • Posts: 1494
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #308 on: Wed, 16 January 2013, 17:17:12 »
Submitted last night :D
Logged

Offline KuhnTang

  • Posts: 540
  • Location: San Diego, CA
  • Game of Thrones
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #309 on: Wed, 16 January 2013, 18:11:50 »
Quote from: Gupgup on Wed, 16 January 2013, 17:17:03
How long do you think that the backorder for MX Whites will take? Thinking about changing my PLU board to reds also, but it depends on how long the wait will be for some whites :)

Thanks Prof, props for doing all this work!

I think he said two months
Logged

Offline Gupgup

  • * Vendor
  • Posts: 584
  • Location: South Dakota, US
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #310 on: Wed, 16 January 2013, 18:37:36 »
Damn, well I guess I'll pass on those then :/ but could you switch my PLU board to one with reds please :) thanks!
Logged

Offline TheProfosist

  • Thread Starter
  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #311 on: Wed, 16 January 2013, 21:23:53 »
Quote from: KuhnTang on Wed, 16 January 2013, 17:11:04
Prof,

I want to add 20 MX Grey's to my order, I ordered before that was an option.  Should I fill out another form, or can you edit my existing order?  I don't want to order again and lose my place in line on the clears and whites.

Do I have the ability to view my order?

I'm pretty sure since I got my order in the day the form went up, but can you confirm that I got in before these switches were placed on backorder?

Thanks
i can add them to your order and i could PM you your order if you want
Logged

Offline TheProfosist

  • Thread Starter
  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #312 on: Wed, 16 January 2013, 21:24:18 »
Quote from: KuhnTang on Wed, 16 January 2013, 18:11:50
Quote from: Gupgup on Wed, 16 January 2013, 17:17:03
How long do you think that the backorder for MX Whites will take? Thinking about changing my PLU board to reds also, but it depends on how long the wait will be for some whites :)

Thanks Prof, props for doing all this work!

I think he said two months
yes i was told 2 months
Logged

Offline Gupgup

  • * Vendor
  • Posts: 584
  • Location: South Dakota, US
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #313 on: Wed, 16 January 2013, 21:42:41 »
Quote from: TheProfosist on Wed, 16 January 2013, 21:23:53
Quote from: KuhnTang on Wed, 16 January 2013, 17:11:04
Prof,

I want to add 20 MX Grey's to my order, I ordered before that was an option.  Should I fill out another form, or can you edit my existing order?  I don't want to order again and lose my place in line on the clears and whites.

Do I have the ability to view my order?

I'm pretty sure since I got my order in the day the form went up, but can you confirm that I got in before these switches were placed on backorder?

Thanks
i can add them to your order and i could PM you your order if you want

That'd be awesome! Thanks man.
Logged

Offline TheProfosist

  • Thread Starter
  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #314 on: Wed, 16 January 2013, 21:45:01 »
Quote from: Gupgup on Wed, 16 January 2013, 21:42:41
Quote from: TheProfosist on Wed, 16 January 2013, 21:23:53
Quote from: KuhnTang on Wed, 16 January 2013, 17:11:04
Prof,

I want to add 20 MX Grey's to my order, I ordered before that was an option.  Should I fill out another form, or can you edit my existing order?  I don't want to order again and lose my place in line on the clears and whites.

Do I have the ability to view my order?

I'm pretty sure since I got my order in the day the form went up, but can you confirm that I got in before these switches were placed on backorder?

Thanks
i can add them to your order and i could PM you your order if you want

That'd be awesome! Thanks man.
you want pm of your order your saying?
Logged

Offline Gupgup

  • * Vendor
  • Posts: 584
  • Location: South Dakota, US
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #315 on: Wed, 16 January 2013, 21:53:23 »
Yes please, that would just clear a couple things up. Thanks!
Logged

Offline KuhnTang

  • Posts: 540
  • Location: San Diego, CA
  • Game of Thrones
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #316 on: Wed, 16 January 2013, 22:31:56 »
Quote from: TheProfosist on Wed, 16 January 2013, 21:45:01
Quote from: Gupgup on Wed, 16 January 2013, 21:42:41
Quote from: TheProfosist on Wed, 16 January 2013, 21:23:53
Quote from: KuhnTang on Wed, 16 January 2013, 17:11:04
Prof,

I want to add 20 MX Grey's to my order, I ordered before that was an option.  Should I fill out another form, or can you edit my existing order?  I don't want to order again and lose my place in line on the clears and whites.

Do I have the ability to view my order?

I'm pretty sure since I got my order in the day the form went up, but can you confirm that I got in before these switches were placed on backorder?

Thanks
i can add them to your order and i could PM you your order if you want

That'd be awesome! Thanks man.
you want pm of your order your saying?

Just wanted to confirm I was in before the backorder, I'm pretty sure I am since I ordered so quickly.
Logged

Offline TheProfosist

  • Thread Starter
  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #317 on: Wed, 16 January 2013, 22:38:57 »
Quote from: KuhnTang on Wed, 16 January 2013, 22:31:56
Quote from: TheProfosist on Wed, 16 January 2013, 21:45:01
Quote from: Gupgup on Wed, 16 January 2013, 21:42:41
Quote from: TheProfosist on Wed, 16 January 2013, 21:23:53
Quote from: KuhnTang on Wed, 16 January 2013, 17:11:04
Prof,

I want to add 20 MX Grey's to my order, I ordered before that was an option.  Should I fill out another form, or can you edit my existing order?  I don't want to order again and lose my place in line on the clears and whites.

Do I have the ability to view my order?

I'm pretty sure since I got my order in the day the form went up, but can you confirm that I got in before these switches were placed on backorder?

Thanks
i can add them to your order and i could PM you your order if you want

That'd be awesome! Thanks man.
you want pm of your order your saying?

Just wanted to confirm I was in before the backorder, I'm pretty sure I am since I ordered so quickly.
yep your before both backorders
Logged

Offline WhiteFireDragon

  • Posts: 2276
    • youtube
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #318 on: Wed, 16 January 2013, 23:47:46 »
ARE YOU SERIOUS? The only thing I actually want from this thread was the mx white switches... didn't even get a chance to get my order in.

Prof, what is the lead time for backordered mx whites? Can you get them to start ordering the whites and clears?
Logged

Offline TheProfosist

  • Thread Starter
  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #319 on: Wed, 16 January 2013, 23:53:11 »
Quote from: WhiteFireDragon on Wed, 16 January 2013, 23:47:46
ARE YOU SERIOUS? The only thing I actually want from this thread was the mx white switches... didn't even get a chance to get my order in.

Prof, what is the lead time for backordered mx whites? Can you get them to start ordering the whites and clears?
2 months as it is right now but since we blew through the certain instock switches so quickly i asked if there was any way we could expedite getting more

BTW there were a fairly large number of clears and a fairly small amount of whites
« Last Edit: Wed, 16 January 2013, 23:56:33 by TheProfosist »
Logged

Offline Amarok

  • Posts: 206
  • Location: Phoenix, AZ
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #320 on: Thu, 17 January 2013, 00:13:15 »
Is it possible to confirm if my order for clears was in before backorders?
Logged
Realforce 87u 55g

Offline Gupgup

  • * Vendor
  • Posts: 584
  • Location: South Dakota, US
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #321 on: Thu, 17 January 2013, 00:14:42 »
If the back order of 2 months is brought down any for whites, put me down for 100 so I don't lose another spot :p
Logged

Offline TheProfosist

  • Thread Starter
  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #322 on: Thu, 17 January 2013, 00:19:14 »
Quote from: Amarok on Thu, 17 January 2013, 00:13:15
Is it possible to confirm if my order for clears was in before backorders?
yep well before
Logged

Offline gameaholic

  • Posts: 428
  • Location: California, USA
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #323 on: Thu, 17 January 2013, 01:08:43 »
I filled the form before I saw the video on what the cherry stabilizer mod is.  I'd also like that.  Please add it to the notes.   
Logged
IBM Model M SSK, Filco MJ2 Ninja TKL with Reds ergo-clears, CM Storm QFR 55g Whites, Poker II with Reds

Offline TheProfosist

  • Thread Starter
  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #324 on: Thu, 17 January 2013, 15:03:05 »
Quote from: gameaholic on Thu, 17 January 2013, 01:08:43
I filled the form before I saw the video on what the cherry stabilizer mod is.  I'd also like that.  Please add it to the notes.   
done
Logged

Offline Leewei

  • Posts: 288
  • Location: United States
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #325 on: Thu, 17 January 2013, 15:13:52 »
Hiya prof, can you add 2 mx grey switches to my order?
Logged
Filco Majestouch 2 Beige TKL with MX Reds
Qsenn dt-35

Offline TheProfosist

  • Thread Starter
  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #326 on: Thu, 17 January 2013, 15:43:38 »
Quote from: Leewei on Thu, 17 January 2013, 15:13:52
Hiya prof, can you add 2 mx grey switches to my order?
done
Logged

Offline Gupgup

  • * Vendor
  • Posts: 584
  • Location: South Dakota, US
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #327 on: Thu, 17 January 2013, 15:46:24 »
Jw, did you switch my PLU to reds instead of browns? Can't remember if I got a message! Thanks
Logged

Offline TheProfosist

  • Thread Starter
  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #328 on: Thu, 17 January 2013, 16:00:10 »
Quote from: Gupgup on Thu, 17 January 2013, 15:46:24
Jw, did you switch my PLU to reds instead of browns? Can't remember if I got a message! Thanks
done
Logged

Offline Gupgup

  • * Vendor
  • Posts: 584
  • Location: South Dakota, US
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #329 on: Thu, 17 January 2013, 16:05:13 »
Awesome! Thanks
Logged

Offline TheProfosist

  • Thread Starter
  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #330 on: Thu, 17 January 2013, 16:14:55 »
Logged

Offline Rendom

  • Posts: 362
  • Location: Australia
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #331 on: Thu, 17 January 2013, 16:16:34 »
Can we still order the switches that are under backordered?
Logged
QFR - MX Blue

Offline TheProfosist

  • Thread Starter
  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #332 on: Thu, 17 January 2013, 16:17:54 »
Quote from: Rendom on Thu, 17 January 2013, 16:16:34
Can we still order the switches that are under backordered?
yep and yo ucan order as many as you want too
Logged

Offline Rendom

  • Posts: 362
  • Location: Australia
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #333 on: Thu, 17 January 2013, 16:23:50 »
Quote from: TheProfosist on Thu, 17 January 2013, 16:17:54
Quote from: Rendom on Thu, 17 January 2013, 16:16:34
Can we still order the switches that are under backordered?
yep and yo ucan order as many as you want too

Alright, thank you. I'll order ASAP
Logged
QFR - MX Blue

Offline nebo

  • Posts: 417
  • Location: Seattle, WA
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #334 on: Fri, 18 January 2013, 11:29:59 »
Hey TP, do you think your modding skills are up to something like this for making a PLU case winkeyless?


http://deskthority.net/photos-videos-f8/komar-60-board-complete-t4865.html
Logged

Offline TheProfosist

  • Thread Starter
  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #335 on: Fri, 18 January 2013, 15:29:07 »
Quote from: nebo on Fri, 18 January 2013, 11:29:59
Hey TP, do you think your modding skills are up to something like this for making a PLU case winkeyless?


http://deskthority.net/photos-videos-f8/komar-60-board-complete-t4865.html
seems like a pretty time consuming mod...
Logged

Offline WhiteFireDragon

  • Posts: 2276
    • youtube
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #336 on: Fri, 18 January 2013, 18:31:27 »
You know what's more time consuming? Properly lubing every switch!

Did they already ordered the two backordered switches from cherry, or is the 2 months ETA from the time you submit all the orders?
Logged

Offline jabar

  • Posts: 848
  • Location: TX, USA
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #337 on: Fri, 18 January 2013, 18:48:00 »
Will there be other GBs for plates, or is this the only one?
Logged
Leopold FC660C - Max Keyboard Nighthawk X8 - Ducky DK9008 Shine II 78 Edition - Noppoo Choc Mini - Cherry G80-2100HDD - Cherry G80-8113HDPUS - Plu-M87 - Leopold FC700R Ergo Clears - Deck Legend Frost 105 - IBM F PC Keyboard - IBM M 122 (Lexmark) - Apple Extended Keyboard II

Phantom 7bit

Offline TheProfosist

  • Thread Starter
  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #338 on: Fri, 18 January 2013, 18:53:46 »
Quote from: WhiteFireDragon on Fri, 18 January 2013, 18:31:27
You know what's more time consuming? Properly lubing every switch!

Did they already ordered the two backordered switches from cherry, or is the 2 months ETA from the time you submit all the orders?
when i submit the order so they know how much to oorder but this GB ends in 3 days so you can think of them as the same.
Logged

Offline TheProfosist

  • Thread Starter
  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #339 on: Fri, 18 January 2013, 18:54:33 »
Quote from: jabar on Fri, 18 January 2013, 18:48:00
Will there be other GBs for plates, or is this the only one?
these are the ones im offering iidk if other ones have even been designed
Logged

Offline jabar

  • Posts: 848
  • Location: TX, USA
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #340 on: Fri, 18 January 2013, 19:18:13 »
Also, how are you doing the PLU-M87 mods for your namesake plate? A dremel? Sorry if this has already been mentioned, leaning towards either PROF or ANSI150 format.

The poor PLUs :(
Logged
Leopold FC660C - Max Keyboard Nighthawk X8 - Ducky DK9008 Shine II 78 Edition - Noppoo Choc Mini - Cherry G80-2100HDD - Cherry G80-8113HDPUS - Plu-M87 - Leopold FC700R Ergo Clears - Deck Legend Frost 105 - IBM F PC Keyboard - IBM M 122 (Lexmark) - Apple Extended Keyboard II

Phantom 7bit

Offline TheProfosist

  • Thread Starter
  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #341 on: Fri, 18 January 2013, 19:27:10 »
Quote from: jabar on Fri, 18 January 2013, 19:18:13
Also, how are you doing the PLU-M87 mods for your namesake plate? A dremel? Sorry if this has already been mentioned, leaning towards either PROF or ANSI150 format.

The poor PLUs :(
yep dremel
Logged

Offline Rendom

  • Posts: 362
  • Location: Australia
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #342 on: Fri, 18 January 2013, 20:52:52 »
Does 7x cherry stabilizer fit in ansi150 ?
Logged
QFR - MX Blue

Offline TheProfosist

  • Thread Starter
  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #343 on: Fri, 18 January 2013, 20:55:35 »
Quote from: Rendom on Fri, 18 January 2013, 20:52:52
Does 7x cherry stabilizer fit in ansi150 ?
yes that would be correct
Logged

Offline Rendom

  • Posts: 362
  • Location: Australia
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #344 on: Fri, 18 January 2013, 20:58:45 »
Quote from: TheProfosist on Fri, 18 January 2013, 20:55:35
Quote from: Rendom on Fri, 18 January 2013, 20:52:52
Does 7x cherry stabilizer fit in ansi150 ?
yes that would be correct

Phew.. thank you
Logged
QFR - MX Blue

Offline fl0w3n

  • Posts: 269
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #345 on: Sat, 19 January 2013, 02:15:49 »
Whoa whoa, haven't checked the thread in a while... didn't see Grey and Dark Grey switches were available.  Really want to try both, as I think blacks aren't stiff enough.

Price is so steep though :( and I've already got some unused clears sitting here waiting

Damn, decisions decisions
Logged

Offline TheQsanity

  • Posts: 1165
  • SmallFry Lovin'
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #346 on: Sat, 19 January 2013, 02:39:54 »
Hmm, White or clear...
Logged
SmallFry! <3

Offline fl0w3n

  • Posts: 269
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #347 on: Sat, 19 January 2013, 12:45:01 »
Quote from: TheQsanity on Sat, 19 January 2013, 02:39:54
Hmm, White or clear...

Buy me Dark Greys and I'll trade you my Clears, so you can skip the two month + waiting list :p
Logged

Offline Acetrak

  • ssk.ℜ
  • Posts: 1079
  • Location: West
  • gnawm_
[GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #348 on: Sat, 19 January 2013, 13:10:56 »
You might be able to work out a trade with someone, using springs from clear switches and linear stems to produce a switch you might enjoy more
Logged

Offline TheQsanity

  • Posts: 1165
  • SmallFry Lovin'
Re: [GB] Phantom Parts and Assembly Services (Taking Orders)
« Reply #349 on: Sat, 19 January 2013, 13:50:33 »
I thought clear springs are similar to black springs? I do have blacks at home. And same reds.

Have the plates been decided yet?

How many keys are on the standard layout and prof layout?
Logged
SmallFry! <3
Pages: « 1 2 3 4 5 6 [7] 8 9 10 11 12 ... 29 »   Go Up
« previous next »