Author Topic: [GB][FINISHED] Plates, PCBs and stabilisers - LeandreN Round 3 (Read 191787 times)

bocahgundul · « **Reply #550 on:** Tue, 12 January 2016, 06:45:59 »

Quote from: LeandreN on Tue, 12 January 2016, 06:41:02

Quote from: xondat on Tue, 12 January 2016, 06:33:19
Mine came today; pictures later!
Wo! Looking forward to some pictures.

LeandreN I pmed you asking that do you have some plate left in stock bro? thank you!

LeandreN · « **Reply #551 on:** Tue, 12 January 2016, 06:47:56 »

Quote from: bocahgundul on Tue, 12 January 2016, 06:45:59

Quote from: LeandreN on Tue, 12 January 2016, 06:41:02
Quote from: xondat on Tue, 12 January 2016, 06:33:19
Mine came today; pictures later!
Wo! Looking forward to some pictures.
LeandreN I pmed you asking that do you have some plate left in stock bro? thank you!

Replied!

TalkingTree · « **Reply #552 on:** Tue, 12 January 2016, 07:02:28 »

LeandreN, PMed you too about a different matter, a few days ago.

(edit: typo)

LeandreN · « **Reply #553 on:** Tue, 12 January 2016, 07:06:51 »

Quote from: TalkingTree on Tue, 12 January 2016, 07:02:28

LeandreN, PMed you too about a different matter, a few ago.

Replied!

xondat · « **Reply #554 on:** Tue, 12 January 2016, 07:19:09 »

How do I remove the edges of the PCB? I'm a noob to this

LeandreN · « **Reply #555 on:** Tue, 12 January 2016, 08:08:50 »

Quote from: xondat on Tue, 12 January 2016, 07:19:09

How do I remove the edges of the PCB? I'm a noob to this

You break of one and one of them until the whole thing breaks off. Use force.

f1xedgear · « **Reply #556 on:** Tue, 12 January 2016, 08:18:13 »

Quote from: LeandreN on Tue, 12 January 2016, 08:08:50

Quote from: xondat on Tue, 12 January 2016, 07:19:09
How do I remove the edges of the PCB? I'm a noob to this
You break of one and one of them until the whole thing breaks off. Use force.

The points that the edges attach to are perforated so they should break pretty easily. I'd recommend using pliers (ONLY on the tabs you are breaking off, hold the PCB in your hand or something) to bend and break them off.

cjhard · « **Reply #557 on:** Tue, 12 January 2016, 08:27:46 »

Do you have tracking numbers? Did I even bother to pay for tracking? I don't remember, but sometimes my goods get left at my apartments front office and nobody leaves a note, but sometimes they get left at the UPS or USPS location and I don't get a note, or my roommate takes the note and never mentions it.

LeandreN · « **Reply #558 on:** Tue, 12 January 2016, 08:37:07 »

Quote from: cjhard on Tue, 12 January 2016, 08:27:46

Do you have tracking numbers? Did I even bother to pay for tracking? I don't remember, but sometimes my goods get left at my apartments front office and nobody leaves a note, but sometimes they get left at the UPS or USPS location and I don't get a note, or my roommate takes the note and never mentions it.

No tracking unfortunately. Only a few orders has tracking.

LeandreN · « **Reply #559 on:** Tue, 12 January 2016, 11:01:58 »

Rarabka233
pseudonymjames
nathanrosspowell
beltet
ekx

These shipped today! I have been busy with the Z cases i had to ship out.

nathanrosspowell · « **Reply #560 on:** Tue, 12 January 2016, 11:04:37 »

Quote from: LeandreN on Tue, 12 January 2016, 11:01:58

Rarabka233
pseudonymjames
nathanrosspowell
beltet
ekx

These shipped today! I have been busy with the Z cases i had to ship out.

That's what I like to see! Thanks a bunch for the hard work L

LeandreN · « **Reply #561 on:** Tue, 12 January 2016, 11:05:32 »

Big mechmarket sale tonight!

f1xedgear · « **Reply #562 on:** Tue, 12 January 2016, 11:10:55 »

Quote from: LeandreN on Tue, 12 January 2016, 11:05:32

Big mechmarket sale tonight!

Post a link here when it starts? Tapatalk will send push notifications

LeandreN · « **Reply #563 on:** Tue, 12 January 2016, 11:11:26 »

Quote from: f1xedgear on Tue, 12 January 2016, 11:10:55

Quote from: LeandreN on Tue, 12 January 2016, 11:05:32
Big mechmarket sale tonight!

Post a link here when it starts? Tapatalk will send push notifications

Okey dokey

LeandreN · « **Reply #564 on:** Tue, 12 January 2016, 11:57:09 »

2 minutes until sale on mechmarket!

LeandreN · « **Reply #565 on:** Tue, 12 January 2016, 12:00:43 »

https://www.reddit.com/r/mechmarket/comments/40nj2c/eunoh60_kits_parts_dolch_dsa_iso_pbt_blanks_w/

https://www.reddit.com/r/mechmarket/comments/40nj2c/eunoh60_kits_parts_dolch_dsa_iso_pbt_blanks_w/

https://www.reddit.com/r/mechmarket/comments/40nj2c/eunoh60_kits_parts_dolch_dsa_iso_pbt_blanks_w/

xondat · « **Reply #566 on:** Tue, 12 January 2016, 12:05:58 »

Quote from: f1xedgear on Tue, 12 January 2016, 08:18:13

Quote from: LeandreN on Tue, 12 January 2016, 08:08:50
Quote from: xondat on Tue, 12 January 2016, 07:19:09
How do I remove the edges of the PCB? I'm a noob to this
You break of one and one of them until the whole thing breaks off. Use force.

The points that the edges attach to are perforated so they should break pretty easily. I'd recommend using pliers (ONLY on the tabs you are breaking off, hold the PCB in your hand or something) to bend and break them off.

These are insanely hard to break off. Feels wrong putting so much force on a PCB.

LeandreN · « **Reply #567 on:** Tue, 12 January 2016, 12:06:28 »

Yeah. They really are.

flob_ert · « **Reply #568 on:** Tue, 12 January 2016, 13:13:05 »

Today was a good mail day

Everything arrived perfectly, thank you again for the R1 plate and stabilizers... I cant wait to get building.

LeandreN · « **Reply #569 on:** Tue, 12 January 2016, 13:17:46 »

Quote from: flob_ert on Tue, 12 January 2016, 13:13:05

Today was a good mail day

Everything arrived perfectly, thank you again for the R1 plate and stabilizers... I cant wait to get building.

Awesome, where is the pictures ?

flob_ert · « **Reply #570 on:** Tue, 12 January 2016, 13:29:16 »

Quote from: LeandreN on Tue, 12 January 2016, 13:17:46

Quote from: flob_ert on Tue, 12 January 2016, 13:13:05
Today was a good mail day

Everything arrived perfectly, thank you again for the R1 plate and stabilizers... I cant wait to get building.

Awesome, where is the pictures ?

I'm no photographer (Phone camera)

LeandreN · « **Reply #571 on:** Tue, 12 January 2016, 13:32:45 »

Quote from: flob_ert on Tue, 12 January 2016, 13:29:16

Quote from: LeandreN on Tue, 12 January 2016, 13:17:46
Quote from: flob_ert on Tue, 12 January 2016, 13:13:05
Today was a good mail day

Everything arrived perfectly, thank you again for the R1 plate and stabilizers... I cant wait to get building.

Awesome, where is the pictures ?

Awesome, thanks(i love pictures).
I'm no photographer (Phone camera)

(Attachment Link)

kevral · « **Reply #572 on:** Wed, 13 January 2016, 03:31:38 »

Received, with thanks!

Relaxbro · « **Reply #573 on:** Wed, 13 January 2016, 07:06:09 »

Hey LeandreN, does the plate support split right shift? I see the PCB does.

f1xedgear · « **Reply #574 on:** Wed, 13 January 2016, 07:14:39 »

Quote from: Relaxbro on Wed, 13 January 2016, 07:06:09

Hey LeandreN, does the plate support split right shift? I see the PCB does.

Yes it does!

Relaxbro · « **Reply #575 on:** Wed, 13 January 2016, 07:19:49 »

Quote from: f1xedgear on Wed, 13 January 2016, 07:14:39

Quote from: Relaxbro on Wed, 13 January 2016, 07:06:09
Hey LeandreN, does the plate support split right shift? I see the PCB does.
Yes it does!

Cool thanks. I will probably go that route then.

LeandreN · « **Reply #576 on:** Wed, 13 January 2016, 13:06:28 »

Shipped:

Cowetting
RGLKIHLVDSBYZWFSBHK

Was home late, had to ship out some mechmarket, i emptied the packaging material and one of those packages over had a 3 page form i had to fill out. I will to much more tomorrow, i promise!

TalkingTree · « **Reply #577 on:** Wed, 13 January 2016, 13:47:34 »

Quote from: LeandreN on Wed, 13 January 2016, 13:06:28

Shipped:

Cowetting
RGLKIHLVDSBYZWFSBHK

Is that a screenname or a tracking code?

LeandreN · « **Reply #578 on:** Wed, 13 January 2016, 13:49:51 »

Quote from: TalkingTree on Wed, 13 January 2016, 13:47:34

Quote from: LeandreN on Wed, 13 January 2016, 13:06:28
Shipped:

Cowetting
RGLKIHLVDSBYZWFSBHK
Is that a screenname or a tracking code?

That is definetily a screenname. From Reddit though.

f1xedgear · « **Reply #579 on:** Wed, 13 January 2016, 13:50:54 »

Quote from: TalkingTree on Wed, 13 January 2016, 13:47:34

Quote from: LeandreN on Wed, 13 January 2016, 13:06:28
Shipped:

Cowetting
RGLKIHLVDSBYZWFSBHK
Is that a screenname or a tracking code?

I think KPhmBXZoLJuKUwJ1BYWK might beat that one for length

rotciveel · « **Reply #580 on:** Wed, 13 January 2016, 14:35:22 »

Shoulda gotten in on this GB sooner.. being on the bottom of the list sucks!

LeandreN · « **Reply #581 on:** Wed, 13 January 2016, 16:35:50 »

Get some plates and ISO sets, or single SA keys:

https://www.reddit.com/r/mechmarket/comments/40ug06/eunoh_jdleandren_60_plates_sa_crap_keys_iso_pbt/

Order now!

theginginator · « **Reply #582 on:** Wed, 13 January 2016, 17:23:07 »

received my order today, as always great group buy, now i have 3 boards to put together

beltet · « **Reply #583 on:** Wed, 13 January 2016, 17:56:10 »

Quote from: LeandreN on Tue, 12 January 2016, 11:01:58

Rarabka233
pseudonymjames
nathanrosspowell
beltet
ekx

These shipped today! I have been busy with the Z cases i had to ship out.

Great Thanks!

mashby · « **Reply #584 on:** Thu, 14 January 2016, 09:51:15 »

More pictures please. Show us what you got!

All potatoes welcome.

xondat · « **Reply #585 on:** Thu, 14 January 2016, 10:14:30 »

I'm taking pictures in one massive haul, considering I've got 4 more things to come within a week.

LeandreN · « **Reply #586 on:** Thu, 14 January 2016, 11:25:11 »

Shipped today:

Arcanitte

Numpy

mversion

wockytocky

RayNele

briancvrrbs

DavinDidIt

potatowire

Ddcolt

EDIT: chancellorr

Let me see your pictures when stuff arrives!

f1xedgear · « **Reply #587 on:** Thu, 14 January 2016, 11:38:14 »

Quote from: LeandreN on Thu, 14 January 2016, 11:25:11

Shipped today:

Arcanitte

Numpy

mversion

wockytocky

RayNele

briancvrrbs

DavinDidIt

potatowire

Ddcolt

Let me see your pictures when stuff arrives!

Looks like I might be next! #HYPE

chancellorr · « **Reply #588 on:** Thu, 14 January 2016, 11:39:00 »

The spreadsheet says that you sent mine but you didn't list me in any of your shipping updates. Don't mess with my head LeandreN! 😉

LeandreN · « **Reply #589 on:** Thu, 14 January 2016, 11:41:01 »

Quote from: chancellorr on Thu, 14 January 2016, 11:39:00

The spreadsheet says that you sent mine but you didn't list me in any of your shipping updates. Don't mess with my head LeandreN! 😉

Yours was shipped, sorry. Edited now.

)

chancellorr · « **Reply #590 on:** Thu, 14 January 2016, 11:42:03 »

Quote from: LeandreN on Thu, 14 January 2016, 11:41:01

Quote from: chancellorr on Thu, 14 January 2016, 11:39:00
The spreadsheet says that you sent mine but you didn't list me in any of your shipping updates. Don't mess with my head LeandreN! 😉

Yours was shipped, sorry. Edited now. )

I'm so excited!! Thank you! This has easily been the best GB I've been a part of.

Vimto · « **Reply #591 on:** Thu, 14 January 2016, 13:16:42 »

This is going to be my first custom build, and I was wondering where I could buy krytox lubricant from?
I've seen in the leandren vids on youtube that you should use lubricant on the stabilizers.

I'm based in Hong Kong, and can see it in TaoBao but it's in huge quantities, and I'd probably buy the wrong stuff.
Also where else should I use lubricant? In the switches?

merlin64 · « **Reply #592 on:** Fri, 15 January 2016, 00:29:38 »

Man....I missed out on this. I'd be up for any extra PCBs if any...sigh

xondat · « **Reply #593 on:** Fri, 15 January 2016, 04:56:01 »

Quote from: Vimto on Thu, 14 January 2016, 13:16:42

This is going to be my first custom build, and I was wondering where I could buy krytox lubricant from?
I've seen in the leandren vids on youtube that you should use lubricant on the stabilizers.

I'm based in Hong Kong, and can see it in TaoBao but it's in huge quantities, and I'd probably buy the wrong stuff.
Also where else should I use lubricant? In the switches?

I bought mine from techkeys.us

LeandreN · « **Reply #594 on:** Fri, 15 January 2016, 11:40:59 »

All the GB orders are shipped.

Please PM me if you are missing something, I have not much replacements.

rotciveel · « **Reply #595 on:** Fri, 15 January 2016, 11:44:17 »

Woohooooo! Thought it would be a few days till you got to mine, but you the man!

itzmeluigi · « **Reply #596 on:** Fri, 15 January 2016, 12:00:22 »

Nicceee that was very fast, looking forward to getting the plates and stabilizers thanks

p3lim · « **Reply #597 on:** Fri, 15 January 2016, 12:07:46 »

Crappy quality for now, will play around with it this weekend.

mashby · « **Reply #598 on:** Fri, 15 January 2016, 12:33:47 »

Looks good p3lim. Thank you for sharing!

cjhard · « **Reply #599 on:** Fri, 15 January 2016, 12:35:50 »

I picked up the goods yesterday with my Apartment managers office just before they closed. No pictures because I don't picture, but these are very clean looking PCBs! And the purple plate being sandwiched between them didn't bend, which is pretty sweet.

News:

Author Topic: [GB][FINISHED] Plates, PCBs and stabilisers - LeandreN Round 3 (Read 191787 times)