I’m having an issue with my dolch.cr where it is flashing successfully using QMK Toolbox, but its registering the wrong keys. Has anybody had the same issue was able to solve it?
So far I have tried all 3 doro67 firmwares and the firmware provided by the maker.
Have you tried using Doro67 VIA firmware and using VIA to configure your board?
just tried this now. unfortunately, I am still encountering the same issues, which are:
1) all working keys (only around 10 keys) activate the wrong keys even when it is correctly mapped in Via. Example, pressing the left shift key activates < key and pressing Z key activates M.
2) the rest of the 50+ keys are all unresponsive
3) going back to the vendor firmware exhibits same issues above, but the keys that respond are in a different location. (example: ESC activates TAB, Caps Lock activates Left Shift)
I have tried all 3 doro67 via firmwares and they all have the same issues stated above.
have flashed 5 different boards before and have not encountered an issue like this. at this point, I am thinking there might be an issue with my PCB.