Author Topic: GHpad FTW (10-Key Pad for GH60)  (Read 481680 times)

0 Members and 1 Guest are viewing this topic.

Offline fydo

  • Posts: 186
  • Location: Alberta, Canada
  • Meow!
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #150 on: Mon, 02 September 2013, 11:29:44 »
Any further progress on this? I hate to sound impatient and I know these things take time, but this is a seriously awesome project and I want one a lot.

;)
CoolerMaster Quickfire Rapid | Ducky Shine II (White LED)

Offline regack

  • Posts: 660
  • Location: Thessia
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #151 on: Mon, 16 September 2013, 17:39:14 »
Am i supposed to be working on something here?   :-[

Offline MOZ

  • KING OF THE NEWBIES
  • * Maker
  • Posts: 3981
  • Location: Jo'burg
  • Busy making stuff
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #152 on: Mon, 16 September 2013, 18:37:33 »
Finally a hint of update :P

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #153 on: Mon, 16 September 2013, 18:41:50 »
Am i supposed to be working on something here?   :-[


Finally a hint of update :P

Yes please!

Offline regack

  • Posts: 660
  • Location: Thessia
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #154 on: Mon, 16 September 2013, 21:11:09 »
Ok, uhh...

Here's a stab at that 4x6 keypad I threw together.
Show Image


I'm not sure if komar007 is still working on the atmega32u2 based version, but I'm going to sum up what I think people were asking for...

- 4x6 w/option to remove 1 row to make a 4x5 pad
- Num lock / Fn LED (probably one of each or 3 LEDs or something nifty)
- SMT on back of board
- some mounting holes for standoffs for non-plate versions
- option for maximum 24 keys all 1unit...

- option for this layout:
... Something like this would work well.
Show Image



Did I miss anything?

« Last Edit: Mon, 16 September 2013, 21:13:23 by regack »

Offline TheFlyingRaccoon

  • HHKB Pro
  • * Maker
  • Posts: 666
  • Location: Texas
  • Cable maker and future engineer
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #155 on: Mon, 16 September 2013, 21:17:58 »
Ok, uhh...

Here's a stab at that 4x6 keypad I threw together.
Show Image


I'm not sure if komar007 is still working on the atmega32u2 based version, but I'm going to sum up what I think people were asking for...

- 4x6 w/option to remove 1 row to make a 4x5 pad
- Num lock / Fn LED (probably one of each or 3 LEDs or something nifty)
- SMT on back of board
- some mounting holes for standoffs for non-plate versions
- option for maximum 24 keys all 1unit...

- option for this layout:
... Something like this would work well.
Show Image



Did I miss anything?

You missed my PM :P
HHKB Pro 2   SmallFry Keyboard

Offline jdcarpe

  • * Curator
  • Thread Starter
  • Posts: 8852
  • Location: Odessa, TX
  • Live long, and prosper.
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #156 on: Mon, 16 September 2013, 21:29:19 »
Ok, uhh...

Here's a stab at that 4x6 keypad I threw together.
Show Image


I'm not sure if komar007 is still working on the atmega32u2 based version, but I'm going to sum up what I think people were asking for...

- 4x6 w/option to remove 1 row to make a 4x5 pad
- Num lock / Fn LED (probably one of each or 3 LEDs or something nifty)
- SMT on back of board
- some mounting holes for standoffs for non-plate versions
- option for maximum 24 keys all 1unit...

- option for this layout:
... Something like this would work well.
Show Image



Did I miss anything?



That all sounds great to me!
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline MOZ

  • KING OF THE NEWBIES
  • * Maker
  • Posts: 3981
  • Location: Jo'burg
  • Busy making stuff
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #157 on: Mon, 16 September 2013, 21:57:41 »
Not enough layouts supported yet :P
35702-0

Offline agodinhost

  • Posts: 767
  • Location: Brazil, RJ
  • Soylent green is people ...
    • Dr Ian O Xaman
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #158 on: Tue, 17 September 2013, 02:17:23 »
Ok, uhh...

Here's a stab at that 4x6 keypad I threw together.
Show Image


I'm not sure if komar007 is still working on the atmega32u2 based version, but I'm going to sum up what I think people were asking for...

- 4x6 w/option to remove 1 row to make a 4x5 pad
- Num lock / Fn LED (probably one of each or 3 LEDs or something nifty)
- SMT on back of board
- some mounting holes for standoffs for non-plate versions
- option for maximum 24 keys all 1unit...

- option for this layout:
... Something like this would work well.
Show Image



Did I miss anything?
Hi regack.
Do you still need help with the PCB?
I'm in vacation mode right now - send me a note.
Building one square I2C keyboard with those 1200 switches (thanks JDCarpe)
GH60 |GH60-Alps |GH60-BT |GHPad/GHPad Alps |GH60-Case |Alps TKL |EL Wire |OS Controller, Round 2 |My Custom Keyboard |WTT/WTB

Offline regack

  • Posts: 660
  • Location: Thessia
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #159 on: Tue, 17 September 2013, 16:11:04 »
So many holes, I think parts of the PCB will fall off by themselves...


Offline MOZ

  • KING OF THE NEWBIES
  • * Maker
  • Posts: 3981
  • Location: Jo'burg
  • Busy making stuff
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #160 on: Tue, 17 September 2013, 16:24:41 »
Would the PCB be strong enough with the switch holes and marking to be able to breakoff one row from the bottom?

Offline regack

  • Posts: 660
  • Location: Thessia
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #161 on: Tue, 17 September 2013, 17:55:26 »
Would the PCB be strong enough with the switch holes and marking to be able to breakoff one row from the bottom?

I guess I'll have to get one made and try it out :D


Offline MOZ

  • KING OF THE NEWBIES
  • * Maker
  • Posts: 3981
  • Location: Jo'burg
  • Busy making stuff
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #162 on: Tue, 17 September 2013, 17:57:03 »
Would the PCB be strong enough with the switch holes and marking to be able to breakoff one row from the bottom?

I guess I'll have to get one made and try it out :D

PM incoming.

Offline TheFlyingRaccoon

  • HHKB Pro
  • * Maker
  • Posts: 666
  • Location: Texas
  • Cable maker and future engineer
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #163 on: Tue, 17 September 2013, 18:41:15 »
I am going to get a batch of 10 of regack's PCBs made. If anyone is interested in getting one, please let me know.
HHKB Pro 2   SmallFry Keyboard

Offline MOZ

  • KING OF THE NEWBIES
  • * Maker
  • Posts: 3981
  • Location: Jo'burg
  • Busy making stuff
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #164 on: Tue, 17 September 2013, 18:42:10 »
I am going to get a batch of 10 of regack's PCBs made. If anyone is interested in getting one, please let me know.

This.

Offline Defying

  • Posts: 259
  • Location: Chattanooga, TN
  • (suffer on)
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #165 on: Tue, 17 September 2013, 19:03:12 »
I am going to get a batch of 10 of regack's PCBs made. If anyone is interested in getting one, please let me know.
Might be interested..

Offline TheFlyingRaccoon

  • HHKB Pro
  • * Maker
  • Posts: 666
  • Location: Texas
  • Cable maker and future engineer
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #166 on: Tue, 17 September 2013, 19:04:26 »
Well I just ordered 10 of them and they were $6 each shipped.  :thumb:
HHKB Pro 2   SmallFry Keyboard

Offline MOZ

  • KING OF THE NEWBIES
  • * Maker
  • Posts: 3981
  • Location: Jo'burg
  • Busy making stuff
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #167 on: Tue, 17 September 2013, 19:07:33 »
Well I just ordered 10 of them and they were $6 each shipped.  :thumb:

Check PM!

Offline ComradeSniper

  • HHKB Pro
  • * Esteemed Elder
  • Posts: 1086
  • Location: Seattle, WA
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #168 on: Tue, 17 September 2013, 22:35:30 »
Incredibly excited to see some progress being made on this. If any testing or similar help is needed I'm up for it.

Offline TheFlyingRaccoon

  • HHKB Pro
  • * Maker
  • Posts: 666
  • Location: Texas
  • Cable maker and future engineer
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #169 on: Tue, 17 September 2013, 22:44:12 »
Okay, so I got an acrylic case drawn up.

The top and bottom plates are 1/16" and the middle is 1/4". I'm thinking the case will be secured by screw posts like these but I'm not sure on that yet.

Other option would be to thread the screws directly into the middle layer.
HHKB Pro 2   SmallFry Keyboard

Offline ComradeSniper

  • HHKB Pro
  • * Esteemed Elder
  • Posts: 1086
  • Location: Seattle, WA
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #170 on: Tue, 17 September 2013, 22:50:23 »
Will there be a 2x zero layout option?

Offline MOZ

  • KING OF THE NEWBIES
  • * Maker
  • Posts: 3981
  • Location: Jo'burg
  • Busy making stuff
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #171 on: Tue, 17 September 2013, 22:54:35 »
Will there be a 2x zero layout option?

There will be.

Offline TheFlyingRaccoon

  • HHKB Pro
  • * Maker
  • Posts: 666
  • Location: Texas
  • Cable maker and future engineer
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #172 on: Tue, 17 September 2013, 22:58:29 »
Will there be a 2x zero layout option?

There will be.

Yes, regack has designed a PCB that will support pretty much every numberpad layout you could hope for. However the ones I had printed are the basic design that will just support this key layout.
HHKB Pro 2   SmallFry Keyboard

Offline ComradeSniper

  • HHKB Pro
  • * Esteemed Elder
  • Posts: 1086
  • Location: Seattle, WA
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #173 on: Tue, 17 September 2013, 23:05:33 »
Ok, cool.

Offline TheFlyingRaccoon

  • HHKB Pro
  • * Maker
  • Posts: 666
  • Location: Texas
  • Cable maker and future engineer
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #174 on: Tue, 17 September 2013, 23:08:40 »
Ok, cool.

If you are interested in one, just let me know. I think there is 1 of 10 unreserved PCBs left.
HHKB Pro 2   SmallFry Keyboard

Offline dragonxx21

  • Posts: 471
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #175 on: Wed, 18 September 2013, 00:09:15 »
Any ideas on how much a case would cost to get made? Any plans for a small GB?

Ok, cool.

If you are interested in one, just let me know. I think there is 1 of 10 unreserved PCBs left.
Remember to save one for me! :D

Keyboards Owned:

Realforce Topre 91 Key JIS Profile - Main
CM Quickfire Rapid Blue Switches
IBM Model M in Industrial Shell

Offline MOZ

  • KING OF THE NEWBIES
  • * Maker
  • Posts: 3981
  • Location: Jo'burg
  • Busy making stuff
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #176 on: Wed, 18 September 2013, 00:19:33 »
Any ideas on how much a case would cost to get made? Any plans for a small GB?

Ok, cool.

If you are interested in one, just let me know. I think there is 1 of 10 unreserved PCBs left.
Remember to save one for me! :D

I'll have  quote in few hours for a layered case.

Offline TheFlyingRaccoon

  • HHKB Pro
  • * Maker
  • Posts: 666
  • Location: Texas
  • Cable maker and future engineer
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #177 on: Wed, 18 September 2013, 09:04:05 »
I'll have  quote in few hours for a layered case.

Awesome, thanks MOZ!
HHKB Pro 2   SmallFry Keyboard

Offline MOZ

  • KING OF THE NEWBIES
  • * Maker
  • Posts: 3981
  • Location: Jo'burg
  • Busy making stuff
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #178 on: Wed, 18 September 2013, 10:07:06 »
I'll have  quote in few hours for a layered case.

Awesome, thanks MOZ!

$11 for upto 4, $8 thereafter. Remember, I still have to add cost of bolts and nuts, PayPal and shipping fees, along with compensation for my time, total comes out to be $20 for less than 4 and $17.5 for more than that.

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #179 on: Wed, 18 September 2013, 10:08:36 »
So can we get one of these PCB's? And how much?

Offline TheFlyingRaccoon

  • HHKB Pro
  • * Maker
  • Posts: 666
  • Location: Texas
  • Cable maker and future engineer
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #180 on: Wed, 18 September 2013, 10:48:31 »
So can we get one of these PCB's? And how much?

Yes. I ordered 10 PCBs which cost me $6 each. The only additional  cost will be shipping from you to me. Here are the people that have one of the first 10.
Myself
CPTBadAss
Moz
Jdcarpe
regack
Defying
olaph
whiskytango
dragonxx21
SpAmRaY

If you did not get  one, I apologize. I'm sure we can organize a mini GB or something for the PCBs and cases if there is enough demand. 
HHKB Pro 2   SmallFry Keyboard

Offline mashby

  • ** Moderator Emeritus
  • Posts: 2828
  • Location: Nashville, TN
  • What Up Shoney? (ツ)_/¯
    • Mashby
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #181 on: Wed, 18 September 2013, 11:00:53 »
What the what? I missed this?


Offline dragonxx21

  • Posts: 471
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #182 on: Wed, 18 September 2013, 11:03:02 »
I'll have  quote in few hours for a layered case.

Awesome, thanks MOZ!

$11 for upto 4, $8 thereafter. Remember, I still have to add cost of bolts and nuts, PayPal and shipping fees, along with compensation for my time, total comes out to be $20 for less than 4 and $17.5 for more than that.
Sounds great, so any plans for  starting up a mini gb? I'd love to take advantage of that wholesale price
Keyboards Owned:

Realforce Topre 91 Key JIS Profile - Main
CM Quickfire Rapid Blue Switches
IBM Model M in Industrial Shell

Offline MOZ

  • KING OF THE NEWBIES
  • * Maker
  • Posts: 3981
  • Location: Jo'burg
  • Busy making stuff
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #183 on: Wed, 18 September 2013, 11:04:14 »
I would suggest first getting the protoypes tested well and then going for the GB.

I would be more than happy to help and supply acrylic cases and anything else I can.

One thing to note however is, we should not sway completely away from the original idea of "extending" the GH60, so we don't need a new controller, extra USB, etc. And the GH60 and the GHpad can both be integrated in one case.

It goes without saying that if Regack can do some magic, and make it so that one PCB can perform both tasks, then that would be amazing. Maybe use a dipswitcch or jumpers.

Offline pixel5

  • Posts: 308
  • Location: Texas
    • pixel5
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #184 on: Wed, 18 September 2013, 11:05:27 »
I'd be interested in a setting that would allow you to rotate the pad 90' to the right and use it as a gaming pad. I would have to play test it. It might prove less-than-ergonomic. I have small hands...but here's what I'm thinking

Poker II

Quickfire Rapid
BUY MY CRAP

Offline MOZ

  • KING OF THE NEWBIES
  • * Maker
  • Posts: 3981
  • Location: Jo'burg
  • Busy making stuff
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #185 on: Wed, 18 September 2013, 11:14:38 »
I'll have  quote in few hours for a layered case.

Awesome, thanks MOZ!

$11 for upto 4, $8 thereafter. Remember, I still have to add cost of bolts and nuts, PayPal and shipping fees, along with compensation for my time, total comes out to be $20 for less than 4 and $17.5 for more than that.
Sounds great, so any plans for  starting up a mini gb? I'd love to take advantage of that wholesale price
No point for a mini GB since there are only ten PCBs. I'll just post it here, so those interested, PM me or post here.

The case would consist of 5 layers, top player would be mounting plate, thus a 2TU style, if someone wants a different style with a lip, let me know. Also please post the layout you want.

So far in:
-Myself - Layout undecided.

Offline MOZ

  • KING OF THE NEWBIES
  • * Maker
  • Posts: 3981
  • Location: Jo'burg
  • Busy making stuff
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #186 on: Wed, 18 September 2013, 11:14:59 »
I'd be interested in a setting that would allow you to rotate the pad 90' to the right and use it as a gaming pad. I would have to play test it. It might prove less-than-ergonomic. I have small hands...but here's what I'm thinking

Show Image


There is something good coming.

Offline whiskytango

  • Posts: 576
  • Location: Birmingham, Alabama
  • Don't touch the trim
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #187 on: Wed, 18 September 2013, 11:26:43 »
MOZ, I would be interested in a case. However, if you are only getting these for this first batch of 10 PCBs right now, I believe they will only support the layout TheFlyingRaccoon posted earlier:

Yes, regack has designed a PCB that will support pretty much every numberpad layout you could hope for. However the ones I had printed are the basic design that will just support this key layout.
Show Image


I stay busy with work and family these days, but I'm still around, lurking.

Offline MOZ

  • KING OF THE NEWBIES
  • * Maker
  • Posts: 3981
  • Location: Jo'burg
  • Busy making stuff
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #188 on: Wed, 18 September 2013, 11:34:14 »
MOZ, I would be interested in a case. However, if you are only getting these for this first batch of 10 PCBs right now, I believe they will only support the layout TheFlyingRaccoon posted earlier:

Yes, regack has designed a PCB that will support pretty much every numberpad layout you could hope for. However the ones I had printed are the basic design that will just support this key layout.
Show Image


Not sure, which PCB raccoon has ordered, if it is this one: http://i.imgur.com/TKjMEs3.png

It should support more layouts.

Offline TheFlyingRaccoon

  • HHKB Pro
  • * Maker
  • Posts: 666
  • Location: Texas
  • Cable maker and future engineer
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #189 on: Wed, 18 September 2013, 11:36:54 »
Ok here is my plan for the PCBs. I can buy enough components for everyone (microcontroller, diodes, Mini USB connector.) The only other components you'll need are the switches, caps, and case. I'm sure everyone can get caps and switches themselves, and MOZ can supply the cases.
HHKB Pro 2   SmallFry Keyboard

Offline dragonxx21

  • Posts: 471
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #190 on: Wed, 18 September 2013, 11:39:39 »
I'll have  quote in few hours for a layered case.

Awesome, thanks MOZ!

$11 for upto 4, $8 thereafter. Remember, I still have to add cost of bolts and nuts, PayPal and shipping fees, along with compensation for my time, total comes out to be $20 for less than 4 and $17.5 for more than that.
Sounds great, so any plans for  starting up a mini gb? I'd love to take advantage of that wholesale price
No point for a mini GB since there are only ten PCBs. I'll just post it here, so those interested, PM me or post here.

The case would consist of 5 layers, top player would be mounting plate, thus a 2TU style, if someone wants a different style with a lip, let me know. Also please post the layout you want.

So far in:
-Myself - Layout undecided.
I'd be interested in a case if it fits the pcbs that TFR picked up. Layout undecided.
Keyboards Owned:

Realforce Topre 91 Key JIS Profile - Main
CM Quickfire Rapid Blue Switches
IBM Model M in Industrial Shell

Offline TheFlyingRaccoon

  • HHKB Pro
  • * Maker
  • Posts: 666
  • Location: Texas
  • Cable maker and future engineer
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #191 on: Wed, 18 September 2013, 11:39:50 »
MOZ, I would be interested in a case. However, if you are only getting these for this first batch of 10 PCBs right now, I believe they will only support the layout TheFlyingRaccoon posted earlier:

Yes, regack has designed a PCB that will support pretty much every numberpad layout you could hope for. However the ones I had printed are the basic design that will just support this key layout.
Show Image


Yes, this is correct. I believe regack is still working on the multi-layout PCB.
HHKB Pro 2   SmallFry Keyboard

Offline dragonxx21

  • Posts: 471
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #192 on: Wed, 18 September 2013, 11:44:06 »
Man... I'm supposed to be paying attention to biology. But this is so much more important
Keyboards Owned:

Realforce Topre 91 Key JIS Profile - Main
CM Quickfire Rapid Blue Switches
IBM Model M in Industrial Shell

Offline regack

  • Posts: 660
  • Location: Thessia
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #193 on: Wed, 18 September 2013, 11:45:28 »
Will there be a 2x zero layout option?

There will be.

These are a few basic layout possibilities.  There are others, but they start to get a little weird...


Offline whiskytango

  • Posts: 576
  • Location: Birmingham, Alabama
  • Don't touch the trim
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #194 on: Wed, 18 September 2013, 11:50:06 »
Ok here is my plan for the PCBs. I can buy enough components for everyone (microcontroller, diodes, Mini USB connector.) The only other components you'll need are the switches, caps, and case. I'm sure everyone can get caps and switches themselves, and MOZ can supply the cases.

That would be fine by me. I need to place a mouser order anyway though, so it doesn't really matter for me. Whatever is cheaper I suppose and whatever the other 9 want to do. By the way, I haven't seen the details of this design, but from studying other controllers (GH60, Frosty Flake, etc.), don't you also need a crystal, switch, and some capacitors and resistors?

These are a few basic layout possibilities.  There are others, but they start to get a little weird...

Show Image


Very cool. My vote would be for the top middle layout. Or bottom right.
I stay busy with work and family these days, but I'm still around, lurking.

Offline pixel5

  • Posts: 308
  • Location: Texas
    • pixel5
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #195 on: Wed, 18 September 2013, 11:55:23 »
Why not add support for every switch to have an LED?
Poker II

Quickfire Rapid
BUY MY CRAP

Offline MOZ

  • KING OF THE NEWBIES
  • * Maker
  • Posts: 3981
  • Location: Jo'burg
  • Busy making stuff
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #196 on: Wed, 18 September 2013, 11:57:40 »
Okay, so the layout is fixed for this prototype.

In so far:
- Me
- TheFlyingRaccoon
- SpamRay
- Dragonxx21
- whiskeytango

I would in most likelyhood ship all the cases to TFR, unless someone is not in CONUS. He can then ship them out to each member with all the other components.

Offline dragonxx21

  • Posts: 471
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #197 on: Wed, 18 September 2013, 12:00:29 »
Okay, so the layout is fixed for this prototype.

In so far:
- Me
- TheFlyingRaccoon
- SpamRay
- Dragonxx21
- whiskeytango

I would in most likelyhood ship all the cases to TFR, unless someone is not in CONUS. He can then ship them out to each member with all the other components.
I'm in Canada
Keyboards Owned:

Realforce Topre 91 Key JIS Profile - Main
CM Quickfire Rapid Blue Switches
IBM Model M in Industrial Shell

Offline CPTBadAss

  • Woke up like this
  • Posts: 14363
    • Tactile Zine
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #198 on: Wed, 18 September 2013, 12:03:37 »
Which layout is fixed?

Offline TheFlyingRaccoon

  • HHKB Pro
  • * Maker
  • Posts: 666
  • Location: Texas
  • Cable maker and future engineer
Re: GHpad FTW (10-Key Pad for GH60)
« Reply #199 on: Wed, 18 September 2013, 12:06:50 »
Which layout is fixed?

The original layout here.
HHKB Pro 2   SmallFry Keyboard