Author Topic: Q/A  (Read 99383 times)

0 Members and 1 Guest are viewing this topic.

Offline Kabuks

  • Posts: 220
  • Location: Canada
Re: Q/A
« Reply #200 on: Thu, 09 May 2013, 21:47:22 »
I was planning to just print shipping labels.  I'll send out a mass e-mail through a newsletter, update it on Facebook, and on geekhack.  Would that be okay?

Yea that seems fine. I just didn't want to order the other stuff I was going to buy right now and have the money tied up while waiting for the Dolch.

Offline calavera

  • Posts: 1713
  • Location: South Korea
Re: Q/A
« Reply #201 on: Fri, 10 May 2013, 00:45:08 »
How is shipping calculated for first class mail?
A full 110 key cap set will fit inside a small flat rate box with ample room for added protection (not really needed) that will cost only $5.15 and take 2~3 days.

This may have been asked already but how many total dolch sets are being ordered? I would guess at least 300 sets as that's the minimum GMK will accept?

Offline ApocalypseMaow

  • Kitteh Overlord
  • Posts: 1877
  • Location: Arkansas
  • Say WHAAT...
Re: Q/A
« Reply #202 on: Fri, 10 May 2013, 00:55:57 »
Anyone with Amazon payment or Google checkout want to proxy for me?
{WTT}HoffNudes(WTS)BLK LightSaverV2         
"#baby****fangerz" -Vesper 2015

Offline Jocelyn

  • Posts: 1608
  • Location: Orlando, FL
  • 조셀린
Re: Q/A
« Reply #203 on: Fri, 10 May 2013, 00:57:09 »
Anyone with Amazon payment or Google checkout want to proxy for me?

Sure, but I'm not sure if Sherry will ship directly to you or not.

Edit - It's soooo easy to set up Amazon Payments. You don't even need a bank account to send money; only need a credit card.

Offline Halverson

  • Traitor Supreme
  • Posts: 6806
  • GIRLSHARK WIZBRO
Re: Q/A
« Reply #204 on: Fri, 10 May 2013, 01:01:04 »
Anyone with Amazon payment or Google checkout want to proxy for me?

Sure, but I'm not sure if Sherry will ship directly to you or not.

Edit - It's soooo easy to set up Amazon Payments. You don't even need a bank account to send money; only need a credit card.

Unless you're a Canadian like me :(

But I bet you wish you were a Canadian like me, dontcha!

Offline Jocelyn

  • Posts: 1608
  • Location: Orlando, FL
  • 조셀린
Re: Q/A
« Reply #205 on: Fri, 10 May 2013, 01:02:53 »
Unless you're a Canadian like me :(

But I bet you wish you were a Canadian like me, dontcha!

lol open a us bank account when you get here and use it for stuff like this ;)

Offline L4yercake

  • Posts: 188
Re: Q/A
« Reply #206 on: Fri, 10 May 2013, 01:05:21 »
Anyone with Amazon payment or Google checkout want to proxy for me?

Sure, but I'm not sure if Sherry will ship directly to you or not.

Edit - It's soooo easy to set up Amazon Payments. You don't even need a bank account to send money; only need a credit card.

Unless you're a Canadian like me :(

But I bet you wish you were a Canadian like me, dontcha!



More

Offline sherryton

  • * Vendor
  • Thread Starter
  • Posts: 881
  • Location: Los Angeles
  • Kībōdo
    • Originative
Re: Q/A
« Reply #207 on: Fri, 10 May 2013, 01:16:45 »
How is shipping calculated for first class mail?
A full 110 key cap set will fit inside a small flat rate box with ample room for added protection (not really needed) that will cost only $5.15 and take 2~3 days.

This may have been asked already but how many total dolch sets are being ordered? I would guess at least 300 sets as that's the minimum GMK will accept?

As you know from the International buyers, there is a little problem with the USPS API Plugin.  It'll be fixed :)

Offline calavera

  • Posts: 1713
  • Location: South Korea
Re: Q/A
« Reply #208 on: Fri, 10 May 2013, 01:22:50 »
I don't quite follow. I was talking about domestic shipping.

Offline sherryton

  • * Vendor
  • Thread Starter
  • Posts: 881
  • Location: Los Angeles
  • Kībōdo
    • Originative
Re: Q/A
« Reply #209 on: Fri, 10 May 2013, 01:24:30 »
I don't quite follow. I was talking about domestic shipping.

It's something to do with the API, I'll ask them to look into it!

Edit:  Send me your order number, and I'll see what I can do for you!!!
« Last Edit: Fri, 10 May 2013, 01:27:34 by sherryton »

Offline aesthetics1

  • Posts: 86
  • Location: Hanford, CA, USA
Re: Q/A
« Reply #210 on: Fri, 10 May 2013, 01:39:49 »
Mmm. Dolch. Ordered. Thanks!
Home: Filco Majestouch TKL MX Red | Work: Ducky Shining (Blue LED) MX Black | Collection: CM Quickfire Rapid MX Red

Offline ApocalypseMaow

  • Kitteh Overlord
  • Posts: 1877
  • Location: Arkansas
  • Say WHAAT...
Re: Q/A
« Reply #211 on: Fri, 10 May 2013, 03:20:50 »
Anyone with Amazon payment or Google checkout want to proxy for me?

Sure, but I'm not sure if Sherry will ship directly to you or not.

Edit - It's soooo easy to set up Amazon Payments. You don't even need a bank account to send money; only need a credit card.
My wife wears a tin foil hat. Put your SS# on the interwebs and your identity is stolen! She means well  :))
{WTT}HoffNudes(WTS)BLK LightSaverV2         
"#baby****fangerz" -Vesper 2015

Offline calavera

  • Posts: 1713
  • Location: South Korea
Re: Q/A
« Reply #212 on: Fri, 10 May 2013, 03:56:59 »
Yeah, amazon now requires your SS# for registration.

Offline Jocelyn

  • Posts: 1608
  • Location: Orlando, FL
  • 조셀린
Re: Q/A
« Reply #213 on: Fri, 10 May 2013, 03:59:59 »
Yeah, amazon now requires your SS# for registration.

Well they always have and to be fair, it's actually the government requiring it, not Amazon :)

Offline ApocalypseMaow

  • Kitteh Overlord
  • Posts: 1877
  • Location: Arkansas
  • Say WHAAT...
Re: Q/A
« Reply #214 on: Fri, 10 May 2013, 05:46:01 »
Yeah, amazon now requires your SS# for registration.

Well they always have and to be fair, it's actually the government requiring it, not Amazon :)
Oh I hear that. I love amazon regardless. So who wants this payment so they can send it to Sherry?

{WTT}HoffNudes(WTS)BLK LightSaverV2         
"#baby****fangerz" -Vesper 2015

Offline calavera

  • Posts: 1713
  • Location: South Korea
Re: Q/A
« Reply #215 on: Fri, 10 May 2013, 05:49:21 »
Yeah, amazon now requires your SS# for registration.

Well they always have and to be fair, it's actually the government requiring it, not Amazon :)

Actually when they first started out, SS# wasn't required. My account was blocked because I didn't supply a SS# in time when they made it a requirement. Now they won't let me update my personal info so I can't use the account I use for amazon prime.

Offline WhiteFireDragon

  • Posts: 2276
    • youtube
Re: Q/A
« Reply #216 on: Fri, 10 May 2013, 06:07:10 »
Dam this had a price bump twice already? It's been less than a day. When I first saw this, I didn't want to make the purchase transaction over wifi or my phone.


Anyone with Amazon payment or Google checkout want to proxy for me?

Sure, but I'm not sure if Sherry will ship directly to you or not.

Edit - It's soooo easy to set up Amazon Payments. You don't even need a bank account to send money; only need a credit card.
My wife wears a tin foil hat. Put your SS# on the interwebs and your identity is stolen! She means well  :))

I'm not saying something will happen, but if it were, then it's ok for the person helping you to be at risk so you can get your set?

Offline ApocalypseMaow

  • Kitteh Overlord
  • Posts: 1877
  • Location: Arkansas
  • Say WHAAT...
Re: Q/A
« Reply #217 on: Fri, 10 May 2013, 08:00:38 »
Dam this had a price bump twice already? It's been less than a day. When I first saw this, I didn't want to make the purchase transaction over wifi or my phone.


Anyone with Amazon payment or Google checkout want to proxy for me?

Sure, but I'm not sure if Sherry will ship directly to you or not.

Edit - It's soooo easy to set up Amazon Payments. You don't even need a bank account to send money; only need a credit card.
My wife wears a tin foil hat. Put your SS# on the interwebs and your identity is stolen! She means well  :))

I'm not saying something will happen, but if it were, then it's ok for the person helping you to be at risk so you can get your set?
No no no! You got that all wrong. I'm asking that someone with Amazon payment already set up take money from me (via paypal) and lets order are stuff together. Then after it ships I can pay extra for shipping to me. I'm not asking anyone to fall on a sword here. Thanks for your concern.  :rolleyes:
Either way no worries I got it sorted.
« Last Edit: Fri, 10 May 2013, 08:09:55 by ApocalypseMaow »
{WTT}HoffNudes(WTS)BLK LightSaverV2         
"#baby****fangerz" -Vesper 2015

Offline alaricljs

  • I be WOT'ing all day...
  • ** Moderator Emeritus
  • Posts: 3715
  • Location: NE US
Re: Q/A
« Reply #218 on: Fri, 10 May 2013, 08:21:42 »
My wife wears a tin foil hat. Put your SS# on the interwebs and your identity is stolen! She means well  :))

Do you not have a CC that provides single-use virtual numbers?  These days I don't have an account *without* that feature simply because it's so common.
Filco w/ Imsto thick PBT
Ducky 1087XM PCB+Plate, w/ Matias "Quiet Click" spring-swapped w/ XM Greens

Offline ApocalypseMaow

  • Kitteh Overlord
  • Posts: 1877
  • Location: Arkansas
  • Say WHAAT...
Re: Q/A
« Reply #219 on: Fri, 10 May 2013, 08:50:59 »
My wife wears a tin foil hat. Put your SS# on the interwebs and your identity is stolen! She means well  :))

Do you not have a CC that provides single-use virtual numbers?  These days I don't have an account *without* that feature simply because it's so common.
Yeah we got all that jazz, but Amazon payments wants her social security number...
This is her answer.

Either way it's all sorted now.
{WTT}HoffNudes(WTS)BLK LightSaverV2         
"#baby****fangerz" -Vesper 2015

Offline alaricljs

  • I be WOT'ing all day...
  • ** Moderator Emeritus
  • Posts: 3715
  • Location: NE US
Re: Q/A
« Reply #220 on: Fri, 10 May 2013, 09:07:00 »
Aaaah, the bank of Amazon.  But the point is, Originative takes credit directly.  :)
Filco w/ Imsto thick PBT
Ducky 1087XM PCB+Plate, w/ Matias "Quiet Click" spring-swapped w/ XM Greens

Offline ApocalypseMaow

  • Kitteh Overlord
  • Posts: 1877
  • Location: Arkansas
  • Say WHAAT...
Re: Q/A
« Reply #221 on: Fri, 10 May 2013, 09:11:21 »
Aaaah, the bank of Amazon.  But the point is, Originative takes credit directly.  :)
Yep, that's how I got it sorted. TAKE MY MONEY SHERRY!
{WTT}HoffNudes(WTS)BLK LightSaverV2         
"#baby****fangerz" -Vesper 2015

Offline Photekq

  • wheat flour zone
  • Posts: 4794
  • Location: North Wales, UK
  • sorry if i was ever an ******* to you
Re: Q/A
« Reply #222 on: Fri, 10 May 2013, 10:20:54 »
If I order a few things from your site on the same account I used to pre order Dolch will you assume that I want them to ship with the Dolch when it arrives, or would you need me to contact you with the order numbers and request it?
https://kbdarchive.org/
github
discord: hi mum#5710

Offline sherryton

  • * Vendor
  • Thread Starter
  • Posts: 881
  • Location: Los Angeles
  • Kībōdo
    • Originative
Re: Q/A
« Reply #223 on: Fri, 10 May 2013, 14:57:16 »
I believe ApocalypseMaow got it all sorted out.  Thanks everyone for helping out!

If I order a few things from your site on the same account I used to pre order Dolch will you assume that I want them to ship with the Dolch when it arrives, or would you need me to contact you with the order numbers and request it?

I will probably figure it out, but it would be better if you sent me the e-mail with both orders.

Offline rao2100

  • Posts: 105
  • Location: Malaysia
Re: Q/A
« Reply #224 on: Sat, 11 May 2013, 08:11:38 »
Hi Sherry,

I am trying order from the site, but it didnt calculate the shipping for Dolch set. To be shipped to Malaysia btw. So how should I proceed?

Should I just order and you can charge me shipping thru paypal?
| KMAC LE Vintage Blues | LZ-S Ergo Clears | Filco TKL MJ2 Ninja Reds | CM QFR - Blues | IBM Model M SSK 1991 |

Offline Photekq

  • wheat flour zone
  • Posts: 4794
  • Location: North Wales, UK
  • sorry if i was ever an ******* to you
Re: Q/A
« Reply #225 on: Sat, 11 May 2013, 08:17:32 »
Hi Sherry,

I am trying order from the site, but it didnt calculate the shipping for Dolch set. To be shipped to Malaysia btw. So how should I proceed?

Should I just order and you can charge me shipping thru paypal?
International shipping doesn't work correctly on his site. He told me that he will charge me for shipping through Paypal once Dolch arrives.
https://kbdarchive.org/
github
discord: hi mum#5710

Offline rao2100

  • Posts: 105
  • Location: Malaysia
Re: Q/A
« Reply #226 on: Sat, 11 May 2013, 08:27:12 »
Just ordered the Dolch set. Paid with my credit card :)

Btw, I didnt create an account I just ordered straight. Hope that is okay and you got my order (937)
« Last Edit: Sat, 11 May 2013, 08:30:49 by rao2100 »
| KMAC LE Vintage Blues | LZ-S Ergo Clears | Filco TKL MJ2 Ninja Reds | CM QFR - Blues | IBM Model M SSK 1991 |

Offline rao2100

  • Posts: 105
  • Location: Malaysia
Re: Q/A
« Reply #227 on: Sat, 11 May 2013, 08:31:35 »
Thanks Photekq for the clarification :)
| KMAC LE Vintage Blues | LZ-S Ergo Clears | Filco TKL MJ2 Ninja Reds | CM QFR - Blues | IBM Model M SSK 1991 |

Offline sherryton

  • * Vendor
  • Thread Starter
  • Posts: 881
  • Location: Los Angeles
  • Kībōdo
    • Originative
Re: Q/A
« Reply #228 on: Sat, 11 May 2013, 14:04:43 »
Just ordered the Dolch set. Paid with my credit card :)

Btw, I didnt create an account I just ordered straight. Hope that is okay and you got my order (937)

I got your order and e-mail.  (I guess it still shows e-mail without creating an account)

Thanks a lot for participating :)

Offline SmallFry

  • ** Moderator Emeritus
  • Posts: 3887
  • Location: Wisconsin, USA
  • Leaving 6/15; returning 6/22 or so.
Re: Q/A
« Reply #229 on: Sat, 11 May 2013, 14:30:07 »
Is the KS Mini dead?

Offline sherryton

  • * Vendor
  • Thread Starter
  • Posts: 881
  • Location: Los Angeles
  • Kībōdo
    • Originative
Re: Q/A
« Reply #230 on: Sat, 11 May 2013, 14:39:07 »
Is the KS Mini dead?

I'm trying to get the aluminum case done by KMAC team.  Hold on to your horses!

PCB will be sold to everyone.  We'll try to have an acrylic and aluminum case for all.

Offline clakdale661

  • Posts: 21
Re: Q/A
« Reply #231 on: Sat, 11 May 2013, 14:59:28 »
I have a question on the shipping:

First class for a whole set is only ~$3.50, and priority is only ~$5.50 small flat rate box. How is first class $8 and prority $10.60 on your website?

Offline sherryton

  • * Vendor
  • Thread Starter
  • Posts: 881
  • Location: Los Angeles
  • Kībōdo
    • Originative
Re: Q/A
« Reply #232 on: Sat, 11 May 2013, 15:20:06 »
I have a question on the shipping:

First class for a whole set is only ~$3.50, and priority is only ~$5.50 small flat rate box. How is first class $8 and prority $10.60 on your website?

This has been repeated for awhile.  If you message me with your order number, then I'll fix it.  I tried to fix the weight of the items, but it didn't matter what we tried.

Edit: I'll add the information on the front page of our web-site and Facebook.
« Last Edit: Sat, 11 May 2013, 15:24:17 by sherryton »

Offline clakdale661

  • Posts: 21
Re: Q/A
« Reply #233 on: Sat, 11 May 2013, 15:36:14 »
Sorry, I didn't know it was metioned before. Where was it repeated? I didn't see a single place where this was said.

Offline sherryton

  • * Vendor
  • Thread Starter
  • Posts: 881
  • Location: Los Angeles
  • Kībōdo
    • Originative
Re: Q/A
« Reply #234 on: Sat, 11 May 2013, 16:01:39 »
http://geekhack.org/index.php?topic=43233.msg886720#msg886720

Thanks a lot for noticing though.  I tried fixing it yesterday, but the same price is still given for springs as keysets.

Please e-mail me if you have the same problems.  I will fix it for you.

Offline sherryton

  • * Vendor
  • Thread Starter
  • Posts: 881
  • Location: Los Angeles
  • Kībōdo
    • Originative
Re: Q/A
« Reply #235 on: Sat, 11 May 2013, 16:12:42 »
Q: KMAC 2 or KMAC 2 Rev? 

I want to know if you guys would like it if there was a hole in the middle of the keyboard.  That way you can put your index fingers through the hole and lift up the keyboard.

This new KMAC 2 requires a MOQ of 30.

Show Image

« Last Edit: Sat, 11 May 2013, 16:14:30 by sherryton »

Offline sherryton

  • * Vendor
  • Thread Starter
  • Posts: 881
  • Location: Los Angeles
  • Kībōdo
    • Originative
Re: Q/A
« Reply #236 on: Sat, 11 May 2013, 16:17:30 »
I'll use this item to gauge the KS Mini.

That design, hole, or the concave design that was implemented in the Koala.

Offline WhiteFireDragon

  • Posts: 2276
    • youtube
Re: Q/A
« Reply #237 on: Sat, 11 May 2013, 16:26:11 »
So that's what that random notch was for. Seriously, how often are you going to lift up the keyboard? And if you are going to lift it, I would think using 2 hands to grab it is not much effort than what that notch can provide.

IMO, it's ugly and just ruins the surface continuity.

Offline sherryton

  • * Vendor
  • Thread Starter
  • Posts: 881
  • Location: Los Angeles
  • Kībōdo
    • Originative
Re: Q/A
« Reply #238 on: Sat, 11 May 2013, 16:29:06 »
So that's what that random notch was for. Seriously, how often are you going to lift up the keyboard? And if you are going to lift it, I would think using 2 hands to grab it is not much effort than what that notch can provide.

IMO, it's ugly and just ruins the surface continuity.

I like your thoughts.  If you noticed though, all the Koreans follow each other somehow.  It transisted from a regular keyboard, then it became angled.  For me, I pick up my keyboard often, but I am pretty sure 95% of the people do not pick up their keyboards.  Anyways, WFD, I can't send you a request, can you change the settings?

Offline WhiteFireDragon

  • Posts: 2276
    • youtube
Re: Q/A
« Reply #239 on: Sat, 11 May 2013, 20:42:34 »
I just noticed another thing on these new KMAC2 revisions. Removable blocks are no longer included, instead the WKL blocks are built into the the main top cover again? I wasn't a huge fan of those removable blocks either. They don't look as nice as one solid top cover.


Anyways, WFD, I can't send you a request, can you change the settings?
What do you mean? My PMs seem to work fine. Unless you're talking about my amazonpayment account, in which case we can talk about this in PMs.

Offline MKULTRA

  • Posts: 1197
  • Location: IN
  • telling it how it is
Re: Q/A
« Reply #240 on: Sat, 11 May 2013, 21:21:05 »
What is the expected time for you to begin shipping the Dolch sets?

Offline badcop

  • Posts: 482
  • Location: NJ
  • thorpe thocking master race
Re: Q/A
« Reply #241 on: Mon, 13 May 2013, 13:43:32 »
sherry-

I just wanted to say that I'm extremely impressed with the shipping time.  Placed my order on Friday, had in the mailbox on Monday morning.  great job and thanks again.
| MX Green Poker | HHKB Pro 2 White | HHKB Pro 2 Black | MX White Goldtouch TK Pad | Modded MX Red kul ES-87
| COMING SOON™ | MX Red GH60 | Ergo Clear GH60 |

Offline sherryton

  • * Vendor
  • Thread Starter
  • Posts: 881
  • Location: Los Angeles
  • Kībōdo
    • Originative
Re: Q/A
« Reply #242 on: Mon, 13 May 2013, 16:01:46 »
What is the expected time for you to begin shipping the Dolch sets?

Nothing is guaranteed, and I have not gotten a response from the company. 

The set should come in a month.  It will take me about 2-3 days to package all the items, and it'll be shipped.

sherry-

I just wanted to say that I'm extremely impressed with the shipping time.  Placed my order on Friday, had in the mailbox on Monday morning.  great job and thanks again.

Thanks a lot.  If you live in the West Coast, then it should arrive in approximately 1-2 business days!

Offline ApocalypseMaow

  • Kitteh Overlord
  • Posts: 1877
  • Location: Arkansas
  • Say WHAAT...
Re: Q/A
« Reply #243 on: Mon, 13 May 2013, 19:56:11 »
Is the Orange/Charcoal stock running low...
{WTT}HoffNudes(WTS)BLK LightSaverV2         
"#baby****fangerz" -Vesper 2015

Offline remedyhalopc

  • Posts: 215
Re: Q/A
« Reply #244 on: Mon, 13 May 2013, 20:33:29 »
Are the 80g springs rated for actuation or bottom out?

Offline sherryton

  • * Vendor
  • Thread Starter
  • Posts: 881
  • Location: Los Angeles
  • Kībōdo
    • Originative
Re: Q/A
« Reply #245 on: Mon, 13 May 2013, 21:18:23 »
Is the Orange/Charcoal stock running low...

Sadly, yes.  I'll be keeping a few for myself though :)

I want to be able to bring them to any meet ups for fun.

Are the 80g springs rated for actuation or bottom out?

Both, these springs are the same weight for the actuation force and the bottom out.

Offline Jocelyn

  • Posts: 1608
  • Location: Orlando, FL
  • 조셀린
Re: Q/A
« Reply #246 on: Mon, 13 May 2013, 21:20:43 »
Both, these springs are the same weight for the actuation force and the bottom out.

I don't understand lol. So it's 80g at both the middle and when fully compressed?

Offline sherryton

  • * Vendor
  • Thread Starter
  • Posts: 881
  • Location: Los Angeles
  • Kībōdo
    • Originative
Re: Q/A
« Reply #247 on: Mon, 13 May 2013, 21:21:28 »
Both, these springs are the same weight for the actuation force and the bottom out.

I don't understand lol. So it's 80g at both the middle and when fully compressed?

Yup

Offline Dubsgalore

  • Banned
  • Posts: 2849
  • Location: 75% You have received a warning for attempting to circumvent the classifieds rules
    • Dubs - Sneakers, Keyboards, and Life
Re: Q/A
« Reply #248 on: Mon, 13 May 2013, 21:21:58 »
Both, these springs are the same weight for the actuation force and the bottom out.

I don't understand lol. So it's 80g at both the middle and when fully compressed?

i thought korean springs were measured by bottoming out force

Offline L4yercake

  • Posts: 188
Re: Q/A
« Reply #249 on: Mon, 13 May 2013, 21:24:05 »
I know you've said you plan to get a 1.75 Shift + Blank 1x but have you got a time-frame on when this would happen.

I would love to get another set of OnC but really no point if its not anytime soon since it's going on an 1800.

Sound like a broken record!