Post by: ingeniousmonkey on Tue, 05 September 2017, 10:19:10
Hello everyone,
The group buy is running.
This group buy is for:
Wireless bluetooth hot swap MX switch keyboards iGK61S, iGK64S & DIY kits, PCBs, and bluetooth hotswap optical keyboard iGK66
Custom 2019 arris aluminum keyboard case & semitransparent Polycarb keyboard case (Fit for iGK6X keyboards, compatible with most other 60% keyboards, such as GH60)
Custom GSA pbt dye-subbed keycaps sets for iGK61, iGK64(multi- colors optional)
Invented fiber glass plate (pre-built with Gateron Taiji satellite axis),strong and elastic without deformation, let you experience no-steel feeling. Fit for iGK6X keyboards, compatible with most other 60 keyboards.
iGK series wireless blueooth keyboards' features:
Bluetooth 5.0/wired dual mode keyboard (can conect 3 bluetooth equipments at the same time)
Full RGB backlit
hot swappable PCB
5-layers (1 default layer; 4 layers fully programmable: 1 layer online programmable and 3 layers onboard programmable) keyboard
With driver software
USB type-C cable
Quick group buying entrances:
Bluetooth hot swap keyboards & DIY kits, PCBs,and DIY parts all here (https://www.epathbuy.com/product-category/portable-bluetooth-mechanical-keyboard/)
Bluetooth keyboard custom barebones kits (https://www.epathbuy.com/product-category/portable-bluetooth-mechanical-keyboard/bluetooth-keyboard-custom-kit/)
Hotswap Bluetooth optical keyboard iGK66-bt (https://www.epathbuy.com/product-category/portable-bluetooth-mechanical-keyboard/bluetooth-optical-switch-keyboard/)
Cheap blueooth hot swap keyboards built-in plastic case (https://www.epathbuy.com/product-category/portable-bluetooth-mechanical-keyboard/cheap-bluetooth-hot-swap-keyboard/)
Custom bluetooth hot swappable keyboards (https://www.epathbuy.com/product-category/portable-bluetooth-mechanical-keyboard/custom-bluetooth-keyboard/)
60% Bluetooth hotswap keyboard DIY parts (https://www.epathbuy.com/product-category/portable-bluetooth-mechanical-keyboard/diy-bluetooth-keyboard-parts/)
iGK61S 61 keys Bluetooth/wired dual mode keyboard, diy kits, PCB, parts... (https://www.epathbuy.com/product-category/portable-wireless-mechanical-keyboard-custom/)
iGK64S 64-keys wireless bluetooth mechanical keyboard, diy kits, PCB, parts... (https://www.epathbuy.com/product-category/compact-bluetooth-mechanical-keyboard/)
Buy 2019 new arrival: custom arris aluminum keyboard case, high quality & nice semitransparent Polycarb case here (https://www.epathbuy.com/product-category/mechanical-keyboard-diy-parts-accessories/custom-mechanical-keyboard-case/)
Buy fiber glass plates built with Gateron Taiji statellite axis for iGK61 and iGK64, compatible with most 60% keyboard cases (https://www.epathbuy.com/product-category/mechanical-keyboard-diy-parts-accessories/plate/)
Buy custom GSA profile dye-subbed pbt keycaps for iGK61,iGK64 (https://www.epathbuy.com/product-category/mechanical-keyboard-diy-parts-accessories/custom-keycaps/)
Buy 60% wireless bluetoth hot swap PCB, 61 keys adn 64 keys layout optioanl (https://www.epathbuy.com/product-category/mechanical-keyboard-diy-parts-accessories/hot-swappable-pcb/)
Group buy timeline for above items:
Group buy opens - September 14, 2019
Group buy closes - September 25, 2019
Estimated ship date - October 15, 2019
Another related infos:
Regular iGK6X wired keyboards and related items, you also can buy on our Epathbuy website,as usually, we have most of them in stock, and can ship them in one week.
Custom mechanical keyboards & DIY kits website Epathbuy main page (https://www.epathbuy.com/)
Buy pre-assemblied 60% hot swap keyboards here (https://www.epathbuy.com/product-category/hot-swappable-mechanical-keyboard/)
Custom mechanical keyboards DIY kits - many kinds optional (https://www.epathbuy.com/product-category/custom-mechanical-keyboard-kits/)
Mechanical keyboard RGB switches - Cherry MX, Kailh box, Gateron mechanical & optical switches optional (https://www.epathbuy.com/product-category/mechanical-keyboard-switches/)
As hot swap keyboards, mechanical keyboard buyer, you need to know (https://www.epathbuy.com/custom-mechanical-keyboard-buying-guide/hot-swap-keyboard/)
Introduction about optical switches & optical key switch keyboards (http://www.pc-100.com/photoelectric-switches-optical-switches-mechanical-gaming-keyboard-optical-mechanical-keyboard-switch/)
Thanks!
[attach=10] [attach=11] [attach=18]
[attach=13] [attach=14] [attach=17]
-------------------------------------------------------------------------------------------------------------------
2018/07/20 Update
Hello everyone,
The round 9 group buy begins.
More new items launched for this GB! Such as 68 layout, custom wooden keyboard case, 2018 arc aluminum case, custom PBT dye-subbed DSA keycaps, Gateron yellow optical switch...
All iGK6X keyboards features:
Full RGB backlit
hot-swappable PCB
5-layers (1 default layer; 4 layers fully programmable: 1 layer online programmable and 3 layers onboard programmable) keyboard
With driver software
USB type-C cable
iGK61: 61-key poker layout, hot swappable MX-based switches
iGK61p: 61-key poker layout, hot swappable optical mechanical switches
iGK62: 62-key with dedicated arrow keys, hot swappable optical mechanical switches
iGK64: 64-key with dedicated arrow keys, hot swappable MX-based mechanical switches
iGK68: 68-key layout, hot swappable MX-based mechanical switches, RGB underglow
iMK11: 104-key hotswap optical switches mechanical keyboard
In this R9 group buy, more new items launched:
1. iGK68 pre-assembly finished product, custom ktis, pcb and diy parts, GB here (http://www.epathbuy.com/product-category/igk68-hot-swap-keyboard/)
[attach=6]
2. Cusotm wooden keyboard case for iGK61,61P, 62 and iGK64:
iGK64 pre-assembly finished products ( wooden case with PBT dye-subbed blossom cherry profile keycaps), GB here (http://www.epathbuy.com/product/hot-swappable-mechanical-keyboard-with-wooden-case-pre-assembly-finished-product-powermonkey-igk64-set4/)
[attach=7]
iGK61 wooden custom kits,GB here (http://www.epathbuy.com/product-category/igk61-hot-swappable-switches-mechanical-keyboard/igk61-custom-wooden-case-kits/)
iGK64 wooden custom kits,GB here (http://www.epathbuy.com/product-category/igk64-hotswap-switches-mechanical-keyboard/igk64-custom-wooden-mechanical-keyboard-case-kit/)
All wooden custom kits for iGK6X keyboards, GB here (http://www.epathbuy.com/product-category/custom-mechanical-keyboard-kits/wooden-case-kits/)
3.Cusotm 2018 arc aluminum case for iGK61,61P, 62 and 64
Pre-assembly finished iGK64 RGB mechanical keyboard ( with 2018 arc aluminum and PBT dye-subbed DSA keycaps), GB here (http://www.epathbuy.com/product/igk64-2018-arc-aluminum-rgb-mechanical-keyboard-replaceable-switches-pcb-design-cherry-mx-gateron-kailh-box-switches-optional-set3/)
[attach=9]
All 2018 arc aluminum keyboards pre-assembly products and custom kits GB here (http://www.epathbuy.com/product-tag/2018-arc-aluminum-case-custom-kits/)
4. Nice price and valued hotswap keyboards
Pre-assembly completed iGK61 (ABS plastic case, doubleshot pbt keycaps, white and black optional ) GB here (http://www.epathbuy.com/product/60-rgb-mechanical-keyboard-hotswap-switch-pbt-keycaps-programmable-61-key-poker-layout-smartmonkey-igk61-set2b/)
[attach=8]
Pre-assembly optcial switch keyboard iGK61p ( ABS plastic case, doubleshot pbt keycaps, white and black optional) GB here (http://www.epathbuy.com/product/61-key-compact-mechanical-gaming-keyboard-optical-switchfull-rgb-programmable-doubleshot-pbt-keycaps-pioneermonkey-igk61p-set2b/)
Pre-assembly completed iGK64 keyboard ( ABS plastic case, PBT dye-subbed DSA keycaps ) GB here (http://www.epathbuy.com/product/hot-swappable-mechanical-keyboard-with-pbt-dye-subbed-dsa-keycaps-powermonkey-igk64-set2c/)
5.For the above GB kits, there are 16 kinds of mx switches or 6 kinds of optical switches optional:
Cherry MX RGB switch in blue, red, brown, silent red and speed silver
Gateron RGB swtich in blue, red, brown, black, green, yellow, silent brown and silent red
Kailh box switch in red, brown and white
Gateron optical switches in blue, red, brown, black, silver and yellow
Yalso can just buy them individually, enjoy your DIY experience!
Mechanical keyboard switches GB here (http://www.epathbuy.com/product-category/mechanical-keyboard-switches/)
6. More kinds of regular custom items are also available in this Round 9 group buy
Quick buying entrances:
iGK61 hotswap keyboard, custom kits and DIY parts (http://www.epathbuy.com/product-category/igk61-hot-swappable-switches-mechanical-keyboard/)
iGK61P optcial keyboard, custom kits and DIY parts (http://www.epathbuy.com/product-category/igk61p-optical-mechanical-keyboard/)
iGK62 optical keyboard, custom kits and DIY parts (http://www.epathbuy.com/product-category/igk62-optical-mechanical-keyboard/)
iGK64 hotswap keyboard, custom kits and DIY parts (http://www.epathbuy.com/product-category/igk64-hotswap-switches-mechanical-keyboard/)
iMK11 optical keyboards (http://www.epathbuy.com/product-category/imk11-optical-mechanical-keyboard/)
All pre-assembly finished hotswap keyboards (http://www.epathbuy.com/product-category/hot-swappable-mechanical-keyboard/)
Aluminum shell custom kits (http://www.epathbuy.com/product-category/custom-mechanical-keyboard-kits/aluminum-shell-kits/)
Barebone kits (http://www.epathbuy.com/product-category/custom-mechanical-keyboard-kits/barebone/)
Cheap plastic case custom kits (http://www.epathbuy.com/product-category/custom-mechanical-keyboard-kits/cheap-plastic-case-kits/)
All hotswap PCBs (http://www.epathbuy.com/product-category/mechanical-keyboard-diy-parts-accessories/hot-swappable-pcb/)
All DIY custom keyboard cases (http://www.epathbuy.com/product-category/mechanical-keyboard-diy-parts-accessories/custom-mechanical-keyboard-case/)
Gateron optical switches (http://www.epathbuy.com/product/gateron-optical-switches/)
Introduction about optical switch (http://www.pc-100.com/photoelectric-switches-optical-switches-mechanical-gaming-keyboard-optical-mechanical-keyboard-switch/)
Timeline for this R9 group buy:
July 20 – Group buy opens
July 29 – Group buy closes
August 30 – Estimated ship date
Welcome any feedback to us, so that we can improve these products more and more. Thanks in advance for all of you!
-----------------------------------------------------------------------------------------------------------------
2018/06/09 Update
Hello everyone,
The round 7 group buy is runnig.
-----------------------------------------------------------
2018/05/03 Update
Hello everyone,
The round 6 group buy is runnig.
This group buy is for iGK6X keyboards (hotswap switches,full RGB & programmable), custom kits, DIY PCB, Cherry MX/Gateron RGB switches...
GB here (http://www.pc-100.com/diy-mechanical-keyboard-custom-kits-pcb/)
[attach=4] [attach=3] [attach=5]
----------------------------------------------------------------------------------------------------
2018/03/30 Update
Hello everyone,
The round 5 group buy is on.
This group buy is for hot-swappable MX-based switches keyboards and optical switches keyboards with full RGB backlit (user can DIY full RGB light effects completely), multi-layer full programmable.
This group buy include 5 models: iGK61, iGK61P, iGK62,iGK64 and iMK11
iGK61: 61-key poker layout, hot swappable MX-based switches
iGK61p: 61-key poker layout, hot swappable optical mechanical switches
iGK62: 62-key with dedicated arrow keys, hot swappable optical mechanical switches
iGK64: 64-key with dedicated arrow keys, hot swappable MX-based mechanical switches
iMK11 104-key hotswap optical switches mechanical keyboard
iGK61 and iGK64 - a FANTASTIC starter keyboard:
1.The hotswap sockets are perfect for those who are interested in trying new switches. This is great!
With visual software driver, multi-layer programmable and DIY full RGB lighting effect, operating easily. This is a super-value keyboard!
2.We supply multi custom kits and DIY PCB parts, for people who are just getting in the hobby, smart buy easily, also are perfect!
iGK61p and iGK62 - the future keyboard:
Hotswap optical switch keyboard, as a mechanical keyboard enthusiast, you should have and try it!
Optical switch is a new kind of switch, different from MX mechanical switch.Introduction of optical switch (http://www.pc-100.com/photoelectric-switches-optical-switches-mechanical-gaming-keyboard-optical-mechanical-keyboard-switch/)
GB main page (http://www.pc-100.com/diy-mechanical-keyboard-custom-kits-pcb/)
iGK61 GB here: pre-assembly finished product, multiple custom kits, DIY PCB... (http://www.pc-100.com/diy-mechanical-keyboard-custom-kits-pcb/igk61-61-key-poker-layout-keyboard-prices-reviews/)
iGK61P GB here: pre-assembly finished product, multiple custom kits, DIY PCB... (http://www.pc-100.com/diy-mechanical-keyboard-custom-kits-pcb/igk61p-diy-optical-switches-mechanical-keyboard-custom-kits-pcb-parts-prices-reviews/)
iGK62 GB here: pre-assembly finished product, multiple custom kits, DIY PCB... (http://www.pc-100.com/diy-mechanical-keyboard-custom-kits-pcb/igk62-62-key-hotswap-optical-switches-mechanical-keyboard-dedicated-arrow-keys-parts-prices-reviews/)
iGK64 GB here: pre-assembly finished product, multiple custom kits, DIY PCB... (http://www.pc-100.com/diy-mechanical-keyboard-custom-kits-pcb/igk64-hot-swappable-cherry-mx-mechanical-keyboard-dedicated-arrow-keys-rgb-backlit/)
iMK11 GB here (http://www.pc-100.com/diy-mechanical-keyboard-custom-kits-pcb/imk11-104-key-optical-switches-mechanical-keyboard-full-rgb-backlit/)
Keyboard Switches GB here: Cherry MX RGB switch(blue,red,brown,silent red,silver), Gateron RGB switch(blue,black,red,brown,yellow,silent red,silent brown,silent black), Gateron optical switch(black,red,blue,brown,silver) (http://www.epathbuy.com/product-category/mechanical-keyboard-switches/)
This round group buy adds white ABS keyboard case and blossom pbt keycaps as optional
iGK61 custom kits with white ABS case (http://www.epathbuy.com/product/igk61-61key-poker-layout-keyboard-customisable-kit-cool-rgb-backlit-fully-programmable-hotswap-switch-pcb-white-abs-plastic-case-kit-6b/)
iGK64 custom kits with white ABS case (http://www.epathbuy.com/product/igk64-60-rgb-keyboard-custom-built-kit-hot-swap-switch-pcb-white-abs-plastic-case-aluminum-plate-kit-6b/)
iGK64 pre-assembly product: with white ABS case and blossom pbt keycaps (http://www.epathbuy.com/product/igk64%EF%BC%9Afully-pre-assembly-60-rgb-backlit-mini-keyboard-64-key-with-arrow-keys-white-abs-plastic-case-and-pbt-keycaps-set-2b/)
iGK64 pre-assembly product: with red aluminum alloy metal case and blossom pbt keycaps (http://www.epathbuy.com/product/igk64-compact-65-mechanical-keyboard-custom-key-cherry-mx-rgb-switch-gateron-rgb-switch-optional-set-1b/)
--------------------------------------------------------------------------------------------------------
2018/01/23 Update
The round 4 group buy for iGK61, iGK61P, iGK62, iGK64 and iMK11(104-key) begins.
GB Here (http://www.pc-100.com/diy-mechanical-keyboard-custom-kits-pcb/)
--------------------------------------------------------------------------------------------------------------
2017/12/22 Update
The round 3 group buy for iGK61, iGK61P, iGK62, iGK64 and iMK11(104-key) begins.
GB Here (http://www.pc-100.com/diy-mechanical-keyboard-custom-kits-pcb/)
-------------------------------------------------------------------------------------------------
2017/12/12 Update:
[news!]New features: Custom “FnX” keys, import/export of macro and RGB light effects for iGK61, 61P,iGK62,and iGK64 keyboards
Change Log: (20171206 Revised Version)
1) Add custom“FnX” function for any keys to “Shift to switch” any other working modes in “online modes”, this is a powerful improvement.( See manual Fig.3.0). (User who bought iGK6X keyboards before need to upgrade the firmware and install the new version of driver software(V5.0.0.21 ) , please download here (http://www.pc-100.com/downloads-mechanical-keyboard/) , it’s free. )
2) Add file “Import/Export” for light effects, user may backup or share the light effects now. (See manual Fig.3-1, the mark 6,7).
3) Modified the “DIY light” UI, make it easier to operate. (See manualFig.3-1, 3-2, 3-3)
4) Add file “Import/Export” for macros, user may backup or share the macros now. (See manual Fig.3-1, the mark 6,7).
Update details (http://www.pc-100.com/new-feature-custom-fnx-keys-importexport-of-macro-and-light-effects-for-our-mechanical-keyboard/)
Thank you
We are very thankful to all the community users who gave us good suggestions and advices.
iGK6X series programmable mechanical keyboards are very flexible products with easily updatable firmware and driver software.We will make continual improvement according to the demands, advice and ideas from users, newest & popular technology of mechanical keyboards.
By the way, groupbuy for Gateron optical switches keyboards (iGK61P, iGK62, iMK11-104key) is on.
GB here (http://www.pc-100.com/diy-mechanical-keyboard-custom-kits-pcb/)
---------------------------------------------------------------------------------------------------------
2017/10/23 Update:
Specifications of iGK6X, driver software, and manual of driver software
Hello, after receiving your keyboard, you can go to pc-100.com's download page (http://www.pc-100.com/downloads-mechanical-keyboard/) to download specifications of iGK6X, driver software and manual of driver software. Hope you can have a wonderful experience on your keyboard.
Any question, please PM me, or leave message Here (http://www.pc-100.com/contact-us/)
Thanks all of you.
.............................................................................................
2017/10/19 Update:
All shipments were finished yesterday.
You will be informed the tracking number via your Paypal in 2 days, after then you can check it.
Any questions, please PM me, or leave message Here (http://www.pc-100.com/contact-us/)
Thanks all of you.
--------------------------------------------------------------------------------------
2017/10/15 Update:
3 days shipping delay. Very sorry for it.
All group buy orders are customized, and the packing and shipping process are more complicated than expected. Although we are working overtime in this week, and try to ship them out on time, but we are not always luck: Today and tomorrow there are Typhoons and rainstorms here, people and vehicles are required not to go out. So the shipping have to be delayed for about 3 days. Really sorry for it.
But I make sure only need more about 3 days, the shipping will be finished, then I will let you know your express(epacket) tracking number ASAP. Thanks all of you,and say sorry again for the shipping delay.
-------------------------------------------------------------------------------------------------
2017/10/09 Update:
All goods are ready. From today all the group buy orders are arranged to be packed one after another. And in one week all of them will be shipped out. Then we will tell you express(epacket) tracking number by email. Please wait patiently. Thanks all of you.
Any questions, please PM me, or leave message Here (http://www.pc-100.com/contact-us/)
-------------------------------------------------------------------------------------------
2017/09/20 Update:
All invoices had been sent out.
Payment deadline is September 21. After that, unpaid orders will be canceled.
Any questions, please PM me, or leave message Here (http://www.pc-100.com/contact-us/)
----------------------------------------------------------------------------------------------
Update news: about invoice, payment deadline, and delivery date
Hello, everyone
The GB is coming to end very soon. We appreciate to all the participants. Thank you very much for all of you.
As this GB is with plenty of purchase optional, so the orders we received are very complex, beyond our expectations. What' more, we find that some orders needed to be confirmed before invoice out, in order to avoid those perhaps mistaken purchase.
So we decided to spend 3 days to sort out orders, confirm some orders by email( for those necessary, we think.), and then send invoice out. Please pay attention to check your email box these 3 days.
So the GB timeline will be changed a little:
September 15 - Group buy closes
September 16-18: sort out orders, confirm orders (for those orders with necessary), and then invoice go out
September 21 - Payment deadline
October 9 - Estimated start of delivery date, and all the orders will be shipped out in one week.
Sorry for the 3 days delay, but we hope to do better for this GB.
Any question, please PM me, or leave message
Here (http://www.pc-100.com/contact-us/)
Thanks again for all of you!
-----------------------------------------------------------------------------------------------------------
Hello everyone,
The group buy begins, for the below 4 kinds of 60% keyboard:
iGK61: 61-key poker layout, hot swappable MX-based switches
iGK61p: 61-key poker layout, hot swappable optical mechanical switches
iGK62: 62-key with dedicated arrow keys, hot swappable optical mechanical switches
iGK64: 64-key with dedicated arrow keys, hot swappable MX-based mechanical switches
Assemblied finished products, DIY custom kits, PCB, case.., parts & accessories can be chosen.
Timeline for this group buy:
September 5 - Group buy opens
September 15 - Group buy closes and invoice go out
September 18 - Payment deadline
October 6 - Estimated start of delivery date, and all the orders will be shipped out in one week.
Note: in this group buy
1. if your mixed buy ≥10pcs ,distributor's discount can be send to you.
Assembled finished keyboard, custom kit or PCB (whether iGK61, iGK61p, iGK62, or iGK64) ,these kinds of items can be calculated.
After you submit the order in the order form, you can send email to us for applying for distributors qualification, and we will give corresponding distributors discount for your order.
2 Buy a single product with a quantity of more than 50, you can send email to us for applying for a senior distributor qualification, and we can give a special price for your order.
3 For a single product with a quantity of more than 100, we can custom it for you. Such as customize ISO layout, 68-key layout, metal case... are all accepted.
IC thread: https://geekhack.org/index.php?topic=91060.50
GB Here (http://www.pc-100.com/diy-mechanical-keyboard-custom-kits-pcb/)
Products & prices details:
1. iGK61
Features:
61-key poker layout
hot swappable MX-based switches
Full RGB backlit
5 layers (including 4 fully programmable layers - 3 on-board programmable layers and 1 online programmable layer ) mechanical keyboard
With visual smart driver software
USB type-C connector
With 8M Onboard Flash memory
Prices:
US$43.5 - assemblied finished product: prebuilt-in Gateron switches+ ABS case+ doubleshot ABS backlit keycaps+USB cable
US$37 - cusom Kit 1: iGK61 PCB + ABS plastic case + plate (including stabilizer) + USB cable
US$83 - custom Kit3-a: iGK61 PCB + CNC anodized aluminum alloy case (silver-gray)+ USB cable
US$87 - custom Kit3-b: iGK61 PCB + CNC anodized aluminum alloy case (red,or blue,or purple,or green can be chosen)+ USB cable
US$27.5 - PCB ( It has been soldered all electronic components, including all RGB LED, user needn’t any soldering.
More group buy choices for iGK61 custom kits, cases...parts & accessories (http://www.pc-100.com/diy-mechanical-keyboard-custom-kits-pcb/igk61-61-key-poker-layout-keyboard-prices-reviews/)
2.iGK61p
Features:
61-key poker layout
hot swappable optical switches
Full RGB backlit
Waterproof & dustproof PCB board
5 layers (including 4 fully programmable layers - 3 on-board programmable layers and 1 online programmable layer ) mechanical keyboard
With visual smart driver software
USB type-C connector
With 8M onboard Flash memory
Optical switches (http://www.pc-100.com/photoelectric-switches-optical-switches-mechanical-gaming-keyboard-optical-mechanical-keyboard-switch/) introduction
Prices:
US$37.5 - assemblied finished product: prebuilt-in Gateron optical switches+ ABS case+ doubleshot ABS backlit keycaps + USB cable
US$32 - custom Kit 1: iGK61p PCB + ABS plastic case + plate (including stabilizer) + USB cable
US$79 - custom Kit3-a: iGK61p PCB + CNC anodized aluminum alloy case (silver-gray)+ USB cable
US$83 - custom Kit3-b: iGK61p PCB + CNC anodized aluminum alloy case (red, or blue, or purple, or green)+ USB cable
US$24.5 - PCB ( It has been soldered all electronic components, including all RGB LED, user needn’t any soldering.
More group buy choices for iGK61p custom kits, cases...parts & accessories (http://www.pc-100.com/diy-mechanical-keyboard-custom-kits-pcb/igk61p-diy-optical-switches-mechanical-keyboard-custom-kits-pcb-parts-prices-reviews/)
3.iGK62
Features:
62-key compact design with dedicated arrow keys
hot swappable optical switches
Full RGB backlit
Waterproof & dustproof PCB board
5 layers (including 4 fully programmable layers - 3 onboard programmable layers and 1 online programmable layer ) mechanical keyboard
With visual smart driver software
USB type-C connector
With 8M Onboard Flash memory
Optical switches (http://www.pc-100.com/photoelectric-switches-optical-switches-mechanical-gaming-keyboard-optical-mechanical-keyboard-switch/) introduction
Prices:
US$42.5 - prebuilt-in Gateron optical switches+ ABS case+ Laser-etched photic ABS keycaps + USB cable
US$35 - custom Kit 1: iGK62 PCB + ABS plastic case + plate (including stabilizer) + USB cable
US$82 - custom kit3-a: iGK62 PCB + CNC anodized aluminum alloy case (silver-gray)+ USB cable
US$86 - custom Kit3-b: iGK62 PCB + CNC anodized aluminum alloy case (red, or blue, or purple, or green)+ USB cable
US$26.5 - PCB (It has been soldered all electronic components, Including all RGB LED, user needn’t any soldering.)
More group buy choices for iGK62 custom kits, cases...parts & accessories (http://www.pc-100.com/diy-mechanical-keyboard-custom-kits-pcb/igk62-62-key-hotswap-optical-switches-mechanical-keyboard-dedicated-arrow-keys-parts-prices-reviews/)
4.iGK64
Features:
64-key compact design with dedicated arrow keys
hot swappable MX-based switches
Full RGB backlit
5 layers (including 4 fully programmable layers - 3 onboard programmable layers and 1 online programmable layer ) mechanical keyboard
With visual smart driver software
USB type-C connector
With 8M Onboard Flash memory
Prices:
US$135 - Assemblied Set 1: prebuilt-in Cherry MX blue switches + PBT dye-subbed keycaps +CNC anodized aluminum alloy case ( silver-gray) +USB cable
US$125 - Assemblied Set 2: Gateron switches +PBT dye-subbed keycaps +CNC anodized aluminum alloy case ( silver-gray) +USB cable
US$53 - Assemblied Set 3: Gateron switches+Laser-etched photic ABS keycaps +Black ABS case +USB cable
US$45.5 - custom Kit 1: iGK64 PCB + ABS plastic case + plate (including stabilizer) + USB cable
US$96 - custom Kit3-a: iGK64 PCB + CNC anodized aluminum alloy case (silver-gray)+ USB cable
US$100 - custom Kit3-b: iGK64 PCB + CNC anodized aluminum alloy case (red, or blue, or purple, or green can be chosen)+ USB cable
US$33.5 - PCB (It has been soldered all electronic components, including all RGB LED, user needn’t any soldering.
More group buy choices for iGK64 custom kits, cases...parts & accessories (http://www.pc-100.com/diy-mechanical-keyboard-custom-kits-pcb/igk64-hot-swappable-cherry-mx-mechanical-keyboard-dedicated-arrow-keys-rgb-backlit/)
Note:
1.No MOQ requirement for the Group Buy
2.Payment: by Paypal
3. Freight costs: the below prices for references, see more freight costs details in the GB order form
US$12 - Economy Express ( like epacket) for Plastic case assembled finished product
US$19.5 - super express (like DHL) for Plastic case assembled finished product
US$18 - Economy Express ( like epacket) for metal case assembled finished product
US$23 - super express (like DHL) for metal assembled finished product
Post by: ingeniousmonkey on Thu, 07 September 2017, 00:47:05
Each purchase of an optical keyboard, can get 10pcs Gateron silver optical switches free, for having a rapid switch experience freely.
Gateron silver optical switch is a rapid switch, especially suitable for e-sport gaming
Output resolution: 1.0±0.1mm
Operating force: 45±15gf
Post by: SpAmRaY on Thu, 07 September 2017, 05:14:03
Is this for distributors only??
Sent from my SM-G930V using Tapatalk
Post by: ingeniousmonkey on Thu, 07 September 2017, 08:06:09
So we can't just buy one keyboard?
Is this for distributors only??
Sent from my SM-G930V using Tapatalk
Of course, buy one keyboard is welcome.
I just want to say if someone buy 10pcs, can get a distributor's discount.
Sorry, make you misunderstand.
Post by: ingeniousmonkey on Thu, 07 September 2017, 19:43:05
My IC thread https://geekhack.org/index.php?topic=91060.0 is locked, this means interest check has been ended. Sorry for I can't reply anything in IC thread. So please come here group buy thread for discussions.Thanks.
Post by: KaosJ on Fri, 08 September 2017, 03:46:34
Quote
For iGK61, iGK61p and iGK62, whether you choose plastic or metal case, the positioning plate is printed white.
For iGK64, whether you choose plastic or metal case, the positioning plate is anodized silver.
Not sure what plastic it is on the 61 version? but it is possible to have an alu option since it is a standard ansi and any 60% alu will work
The 61 and 61p has the holes to support standard 60% cases standoffs, like the GH60 or XD60? Am i right? (seems like yes from the pics but would like a confirmation)
Post by: Ragequit on Fri, 08 September 2017, 04:41:28
Also, since it's optical and 1000hz, the latency should be pretty low right?
Post by: ingeniousmonkey on Fri, 08 September 2017, 21:59:30
I'll ask here since the IC was locked:QuoteFor iGK61, iGK61p and iGK62, whether you choose plastic or metal case, the positioning plate is printed white.
For iGK64, whether you choose plastic or metal case, the positioning plate is anodized silver.
Not sure what plastic it is on the 61 version? but it is possible to have an alu option since it is a standard ansi and any 60% alu will work
The 61 and 61p has the holes to support standard 60% cases standoffs, like the GH60 or XD60? Am i right? (seems like yes from the pics but would like a confirmation)
The plate for 61 and 62 are all steel ( Not plastic) with sprayed white paint. It looks quite good.
Our PCB is with USB type C connector, but on the marketing nearly all the 60% PCB is not with type C connector, so maybe our PCB can't fit the standard 60% case perfectly.
Post by: ingeniousmonkey on Sat, 09 September 2017, 03:06:18
Im interested in the optical IGK61p, could you tell us which orientation the switches are facing? Is the switch logo upside down or level? I'm asking this because I usually use cherry profile keycaps.Im interested in the optical IGK61p, could you tell us which orientation the switches are facing? Is the switch logo upside down or level? I'm asking this because I usually use cherry profile keycaps.
Also, since it's optical and 1000hz, the latency should be pretty low right?
--------------Switch logo is down. Cherry profile keycaps can be used.
Also, since it's optical and 1000hz, the latency should be pretty low right?
---------- Yes.
Some information about optical switches to you for reference:
Gateron silver optical switch is a rapid switch for e-sport gaming
Output resolution: 1.0±0.1mm
Operating force: 45±15gf
Cherry's silver switch
Output resolution: 1.2±0.2mm
Others Gateron optical switches:
Black optical switch
Output resolution: 2.0±0.6mm
Operating force: 60±15gf
Brown optical switch
Output resolution: 2.0±0.6mm
Operating force: 55±15gf
Red optical switch
Output resolution: 2.0±0.6mm
Operating force: 45±15gf
Blue optical switche
Output resolution: 2.3±0.6mm
Operating force: 55±15gf
iGK61p PCB photo to you for reference:
Post by: KaosJ on Sat, 09 September 2017, 05:17:29
I'll ask here since the IC was locked:QuoteFor iGK61, iGK61p and iGK62, whether you choose plastic or metal case, the positioning plate is printed white.
For iGK64, whether you choose plastic or metal case, the positioning plate is anodized silver.
Not sure what plastic it is on the 61 version? but it is possible to have an alu option since it is a standard ansi and any 60% alu will work
The 61 and 61p has the holes to support standard 60% cases standoffs, like the GH60 or XD60? Am i right? (seems like yes from the pics but would like a confirmation)
The plate for 61 and 62 are all steel ( Not plastic) with sprayed white paint. It looks quite good.
Our PCB is with USB type C connector, but on the marketing nearly all the 60% PCB is not with type C connector, so maybe our PCB can't fit the standard 60% case perfectly.
Oh nice is steel, i will definitely enter!
Post by: Ragequit on Sat, 09 September 2017, 19:42:03
And could you do the trampoline mod to dampen the bottom out or is it different inside since it's optical?
More
(https://geekhack.org/index.php?action=dlattach;topic=50632.0;attach=42996;image)(https://geekhack.org/index.php?action=dlattach;topic=50632.0;attach=42998;image)
Post by: KaosJ on Sun, 10 September 2017, 08:15:12
Ok awesome. One more question are these optical switches compatible with zealencios? (that is the silencing clips you put over the switch to dampen sound)
And could you do the trampoline mod to dampen the bottom out or is it different inside since it's optical?MoreShow Image(https://geekhack.org/index.php?action=dlattach;topic=50632.0;attach=42996;image)Show Image(https://geekhack.org/index.php?action=dlattach;topic=50632.0;attach=42998;image)
For the trampoline mode i'm pretty sure you can't, mainly because there should be 2 holes where you put the silicone part.
Post by: ingeniousmonkey on Sun, 10 September 2017, 08:54:39
Ok awesome. One more question are these optical switches compatible with zealencios? (that is the silencing clips you put over the switch to dampen sound)Sorry, I can't answer your this question now. Because I am not know it. I will consult related personnel. Sorry for it.
And could you do the trampoline mod to dampen the bottom out or is it different inside since it's optical?MoreShow Image(https://geekhack.org/index.php?action=dlattach;topic=50632.0;attach=42996;image)Show Image(https://geekhack.org/index.php?action=dlattach;topic=50632.0;attach=42998;image)
Post by: ingeniousmonkey on Sun, 10 September 2017, 08:55:37
Ok awesome. One more question are these optical switches compatible with zealencios? (that is the silencing clips you put over the switch to dampen sound)
And could you do the trampoline mod to dampen the bottom out or is it different inside since it's optical?MoreShow Image(https://geekhack.org/index.php?action=dlattach;topic=50632.0;attach=42996;image)Show Image(https://geekhack.org/index.php?action=dlattach;topic=50632.0;attach=42998;image)
For the trampoline mode i'm pretty sure you can't, mainly because there should be 2 holes where you put the silicone part.
Thank you, KaosJ
Post by: Ragequit on Sun, 10 September 2017, 13:54:07
Post by: ingeniousmonkey on Sun, 10 September 2017, 21:32:57
No problemo, just is it this kind? http://www.gateron.com/supply/21.html
Yes, right.
Post by: ingeniousmonkey on Mon, 11 September 2017, 09:50:25
Each purchase of an optical keyboard, can get 10pcs Gateron silver optical switches free, for having a rapid switch experience freely.
Gateron silver optical switch is a rapid switch, especially suitable for e-sport gaming
Output resolution: 1.0±0.1mm
Operating force: 45±15gf
Post by: ingeniousmonkey on Tue, 12 September 2017, 04:19:29
DIY users can check iGK6X plate mounting dimensions & size (http://www.pc-100.com/mechanical-keyboard-features-parameters/mechanical-keyboard-parameters/) , and to see if our pcb can fit for the standard 60 case on the market.
Post by: Targa-TV on Tue, 12 September 2017, 11:14:16
What program do we use for programming our own layout though?
Post by: ingeniousmonkey on Wed, 13 September 2017, 02:24:15
Wow. 60%, pcb-mount, full RGB, hot-swappable and programmable. Pretty sweet deal.
What program do we use for programming our own layout though?
iGK6x series keyboards are with our distinctive visual smart driver software.
Before running the driver software, you must connect your iGK6X keyboard with your PC. iGK6X software will detect keyboard device automatically. If no keyboard, you will see nothing about the driver software.
We are improving the software ( both in English translation and friendly UI). If you buy one keyboard in this GB, when you receive it, you can come to our website pc-100.com to download the the latest driver software.
Now on our website there is driver software manual (http://www.pc-100.com/downloads-mechanical-keyboard/), you can download it for some reference.
When you need to build new configurations ( such as remap keys, programming your own layout, build macro, customize hotkeys...custom every key's individual color, DIY lighting effects...), you can run the software. And after that , you needn't run the software any more, all the new configurations can be stored in the keyboard, you can use these new configurations at any PC, any where.
Post by: ingeniousmonkey on Thu, 14 September 2017, 00:48:17
Post by: ingeniousmonkey on Thu, 14 September 2017, 22:39:51
GB 12 hours left.
Post by: ingeniousmonkey on Tue, 19 September 2017, 21:46:09
Post by: Ragequit on Sun, 15 October 2017, 02:33:58
Post by: ingeniousmonkey on Sun, 15 October 2017, 10:07:57
updates on shipping?
Sorry, a little delay. Details please see the top update news.
Post by: Ragequit on Sun, 15 October 2017, 11:10:43
Post by: pixelpusher on Sun, 15 October 2017, 11:35:13
updates on shipping?
Sorry, a little delay. Details please see the top update news.
Thanks for the update! Pretty sure typhoons are a good reason to stay at home. Hope everyone is safe and no one had significant property damage. Wishing you all the best.
I'm looking forward to getting this board to check out the quality. I hope to make this my test board for all new MX switches that come out. I've got 5 bags of switches to try out already :)
Post by: ingeniousmonkey on Wed, 18 October 2017, 19:49:58
updates on shipping?
Sorry, a little delay. Details please see the top update news.
Thanks for the update! Pretty sure typhoons are a good reason to stay at home. Hope everyone is safe and no one had significant property damage. Wishing you all the best.
I'm looking forward to getting this board to check out the quality. I hope to make this my test board for all new MX switches that come out. I've got 5 bags of switches to try out already :)
Thank you very much! we are all OK.
All shipment are finished. Please see the update news at the top of this thread.
Hope you can have wonderful experience on this board. :)
Post by: Ragequit on Thu, 19 October 2017, 12:30:10
Post by: pixelpusher on Thu, 19 October 2017, 12:38:19
Post by: pixelpusher on Tue, 24 October 2017, 10:44:17
I was planning my soldering space for building this today... but then I realized... I don't have to solder anything! This will be a rare treat for sure. I'll hopefully post some photos in a few days.
Post by: Ragequit on Tue, 24 October 2017, 12:27:56
Posted some images: https://imgur.com/a/MAbPA
Quick question, is it programmable or not? If so where are the instructions or software?
Post by: pixelpusher on Tue, 24 October 2017, 13:59:42
Got mine today too! First impression that seems like a nice board especially at that price! I got mine preassembled with the plastic case surprisingly no flex at all and it has some cool angles and a subtle mix of glossy parts just enough to make it lok interesting (goes perfect with my G Pro mouse too). The RGB glows nicely with the white plate. I'm not disapointed, many thanks, appreciated the professionalism. ;)
Posted some images: https://imgur.com/a/MAbPA
Quick question, is it programmable or not? If so where are the instructions or software?
Dude, this thing is amazing for the price. Amazing.
http://www.pc-100.com/downloads-mechanical-keyboard/ there is the software and instructions.
Post by: pixelpusher on Tue, 24 October 2017, 14:26:17
I have built 9 custom keyboards in the past, and have modified 6 or 7 others. This will be the first time I have tried hotswap sockets.
Case:
The case is the same form as the plastic ones you can order for cheap from ebay and aliexpress. You can read up on reviews of those if you have more question. Nice, cheap case. Me likey.
It has an interesting mounting system, and I assume it is because of the hotswap sockets. The PCB actually screws to the plate (on the back of the PCB) and then you screw through the plate into the case. The case has 7 or so tall plastic bits that protrude up through the PCB and meet the plate. Intersting that they did it this way but still left all 6 standard mounting holes for 60% baords.
One negative about this case is the screws. As is often the case when screwing into plastic, the holes are very tight and take a lot of careful turning to fully tighten (so as not to strip the screws). My hand still hurts b/c my precision screwdrivers don't have nice cushy handles :(
Included Cable
My first time to use USB-C on a board. Nice to not have to look which way to plug it in. I got what looks to be a 5ft USB-C cable that is black with braided fabric covering it for something like $1. Can't beat that.
PCB compatibility
The PCB is actually compatible with other 60% cases. Now... not ALL of them because it is just a little to large on edges to fit in a pok3r case. However, it fit in my wooden case that I bought from Aliexpress. The only clearance issue with mounts is that the hotswap sockets could interfere slightly with the center screwdown. I was lucky to have it fit down exactly in the wooden case, but YMMV.
Stabilizers
The plate mounted stabilizers are very good. They sound much better than the ones in my pok3er boards. (Those are my only reference for plate mount). I'm pretty picky about my stabilizers, and these are good. I notice a very slight rattle on the enter key but I haven't lubed them yet.
For some strange reason, they have cutouts on the board for PCB stabilizers everywhere EXCEPT the left shift. I would recommend they fix that in the next version for people who wish to buy this as a DIY part.
The hotswap sockets
These are awesome. They are using the new Kailh sockets, and they are ingenious. Mine had a few that were only soldered on one side. These are surface mount pieices, so they just have a slight bit of solder below the hotswap arms. Looks like they didn't get a few of them secured.
When you push the switches through the board, the hotswap plugs will push out if not properly soldered in. In my case, after loading up the board with switches, I had 3 not working. I was able to fix the issue by taking the board out of the case and pressing them back against the solder points. I checked and noticed that one arm of the socket was not soldered on those three switches.
None of this is an issue for me because I have a soldering iron and the knowledge/experience to fix it. I just resoldered the affected arms and all is well now. However, this could be a big deal for someone without equipment or knowledge of how to fix it. I might suggest more QC checks on those solder points. Maybe I got random bad luck. Still, no biggie for people who know how to use a soldering iron.
RGB backlighting
The lighting is vivid.
Programming
I'm not so sure programmable keys. It seems that you can only change a key, not actually add a function layer. So for this reason, I will say the programmability of this keyboard is completely useless. Yes, it supports media functions and arrow keys and such, but you can only assign them to a key, remapping the key. Who would ever do or need such a thing? I was hoping to find a way to set a function key but I'm just not seeing it. You will have to use autohotkey to actually program arrow keys and such on this keyboard if you don't like the default function layer
I had one led not working when I first plugged it in. Touch a soldering iron to all 4 legs on it to reheat the solder and now it works. Again, no big deal to someone with equipment, but not great QC. All you had to do was plug in the cable to see it wasn't working.
My overall impression is that this is respectable. It's not perfect, but it's nice, especially if you don't need custom function layers. For the price I paid... it's a good deal. Happy with my purchase. I plan to use this board to try all of the switches I have sitting around. I have 67g zealios in it at the moment. Very nice, but I'm about to swap it out with 62g and see which I like better.
If this was my only board, I would very much be missing the ability to control media and volume with a Fn+key command. Again, as far as I can tell, this board only allows you to remap keys, not program function layers.
I have 5 or 6 switch tester plates around, but I can't ever get the full effect until they are on a real working board. This is perfect for that job!
Post by: pixelpusher on Tue, 24 October 2017, 15:02:16
EDIT-- figured out I had to plug directly into the PC. I was using a USB hub and it didn't see the keyboard through it. Now to find a longer USB-C cable :(
Also, a little random, but there is a microphone on the PCB. I couldn't figure out what it was when I first looked at it, but then I tried the "music" mode and realized it was actually listening to the sounds in the room, not what was coming from the computer. Weird. I mean, I'm not a conspiracy theory kinda guy, but having a microphone installed on my keyboard makes me a big uncomfortable.
Post by: raxander on Tue, 24 October 2017, 18:55:56
Switches pop in easily, and the PCB accepts PCB-mount or plate-mount switches. LEDs are indeed vivid as the previous poster said. I have zealios on, though, which have a clear housing. You probably would not get as much light through with an opaque housing. I probably will turn them off though as I'm not partial to LEDs - mostly bought this sucker for the hot-swap capability.
EDIT: Duh, the key combinations are in the technical specifications document linked in the first post above. You can't change the mapping without the software, but it looks from the docs like you only have to change it once and then don't need the driver software to be running after that for your custom layout to be active.
EDIT 2: Okay I played around with the driver software on a windows machine. There doesn't seem to be a way to change the "Fn" key to be a different one, it wants to stay the bottom right key. Also don't see a way to make Fn+WASD keys the arrows instead of the default. Also, when I switch the keyboard to a different computer, the changes I made are not saved - it seems you do have to have the driver software running for the changes to persist. Sadly this all means I won't get much use out of this board except possibly as a switch tester.
Post by: pixelpusher on Tue, 24 October 2017, 19:50:26
Got mine yesterday. I got the iGK61 with metal case, and so far I'm impressed. I'm running linux, though, and can't get the driver software to run under wine. Does the driver software need to be running all the time, or just when you want to change something? And does anybody know if there are key combinations that let you change the behavior of the board without the driver software running? I stumbled on some: like Fn+w seems to put you into a different layer where the arrow keys are on.
Switches pop in easily, and the PCB accepts PCB-mount or plate-mount switches. LEDs are indeed vivid as the previous poster said. I have zealios on, though, which have a clear housing. You probably would not get as much light through with an opaque housing. I probably will turn them off though as I'm not partial to LEDs - mostly bought this sucker for the hot-swap capability.
EDIT: Duh, the key combinations are in the technical specifications document linked in the first post above. You can't change the mapping without the software, but it looks from the docs like you only have to change it once and then don't need the driver software to be running after that for your custom layout to be active.
Yes, you can edit the "offline" modes in the software and they will still work without the app running in the background. However, you can't really program anything as far as I can tell. The product said fully programmable, but I think the proper terminology would have been fully re-mappable. You cannot change those built in function mappings, and you cannot add more. You can make it so that pressing a key sends a different keystroke or macro, but I honestly fail to see the usefulness of such functionality.
I think most people use custom function layers and not custom layers. You can program a layer to do what you want like page up, page down, arrow cluster, media controls... but you have to actually be ON that layer to use it. This requires hitting the Fn key and the layer (q=1, w=2, e=3, r=4). Once on that layer you can then use the newly programmed key.
So, if i wanted to use media keys on (W,A,S,D) and still be able to type, I would hop over to layer 2 and remap those keys to play/pause, vol+, vol-, etc...
If I wanted to turn the volume down, I would have to press Function+w and then press my keybind for vol- and then press Function+q to return to the main layer. No one would ever do this. It's silly. You would expect that you could program it so that pressing Fn + S could turn the volume down. Or that Function + H could be home. No such luck.
There are a few options like this in their default Function layers that aren't too bad, but no media keys.
I just programmed everything with autohotkey so that it worked like all of my other boards. I'm a happy camper and the zealios feel great.
Post by: anonymous on Tue, 24 October 2017, 20:18:12
Sent from my iPhone using Tapatalk
Post by: raxander on Tue, 24 October 2017, 20:41:28
Got mine yesterday. I got the iGK61 with metal case, and so far I'm impressed. I'm running linux, though, and can't get the driver software to run under wine. Does the driver software need to be running all the time, or just when you want to change something? And does anybody know if there are key combinations that let you change the behavior of the board without the driver software running? I stumbled on some: like Fn+w seems to put you into a different layer where the arrow keys are on.
Switches pop in easily, and the PCB accepts PCB-mount or plate-mount switches. LEDs are indeed vivid as the previous poster said. I have zealios on, though, which have a clear housing. You probably would not get as much light through with an opaque housing. I probably will turn them off though as I'm not partial to LEDs - mostly bought this sucker for the hot-swap capability.
EDIT: Duh, the key combinations are in the technical specifications document linked in the first post above. You can't change the mapping without the software, but it looks from the docs like you only have to change it once and then don't need the driver software to be running after that for your custom layout to be active.
Yes, you can edit the "offline" modes in the software and they will still work without the app running in the background. However, you can't really program anything as far as I can tell. The product said fully programmable, but I think the proper terminology would have been fully re-mappable. You cannot change those built in function mappings, and you cannot add more. You can make it so that pressing a key sends a different keystroke or macro, but I honestly fail to see the usefulness of such functionality.
I think most people use custom function layers and not custom layers. You can program a layer to do what you want like page up, page down, arrow cluster, media controls... but you have to actually be ON that layer to use it. This requires hitting the Fn key and the layer (q=1, w=2, e=3, r=4). Once on that layer you can then use the newly programmed key.
So, if i wanted to use media keys on (W,A,S,D) and still be able to type, I would hop over to layer 2 and remap those keys to play/pause, vol+, vol-, etc...
If I wanted to turn the volume down, I would have to press Function+w and then press my keybind for vol- and then press Function+q to return to the main layer. No one would ever do this. It's silly. You would expect that you could program it so that pressing Fn + S could turn the volume down. Or that Function + H could be home. No such luck.
There are a few options like this in their default Function layers that aren't too bad, but no media keys.
I just programmed everything with autohotkey so that it worked like all of my other boards. I'm a happy camper and the zealios feel great.
Okay I get how it works now. Yeah I guess I would have to remap everything in my OS to make it usable, cannibalizing the Menu key for the equivalent of "Fn". Not ideal, and of course not readily portable to other computers. Too bad, the board has some really excellent features but lacks a basic necessity that pretty much every 60% user wants. Hopefully they (or someone) will release a new version of the software that gives more flexibility. Until then it's a switch tester for me.
Post by: Ragequit on Wed, 25 October 2017, 03:39:07
http://www.pc-100.com/downloads-mechanical-keyboard/ there is the software and instructions.
thx! Unfortunately it does not seem possible to rebind FN.
It bother me a little bit not having this option since I usually prefer having FN in place of cap lock and the arrows on wasd, stuff like that for one-handed ease of use.
I hope eventually the software will allow for that in the future.
Or did I just not see how to do it? :)
Post by: pixelpusher on Wed, 25 October 2017, 07:22:37
http://www.pc-100.com/downloads-mechanical-keyboard/ there is the software and instructions.
thx! Unfortunately it does not seem possible to rebind FN.
It bother me a little bit not having this option since I usually prefer having FN in place of cap lock and the arrows on wasd, stuff like that for one-handed ease of use.
I hope eventually the software will allow for that in the future.
Or did I just not see how to do it? :)
No, I don’t think it’s possible. I’m using autohotkey to map caplocks to my function key but I am also enjoying their default functions as well.
Post by: Ragequit on Wed, 25 October 2017, 11:41:30
Edit: I got both browns and silvers to test and damn the optical linears are the smoothest feeling Ive ever seen, so nice! (even better when lubed)
This is probably because of the fact that they don't have the metal contact leaf, so there is only the spring no metal leaf friction.
Funnily enough the stems still have the pegs to slide on the metal leaf, I could clip them off with no effect.
The browns of course still need to have the metal leaf in order to have the tactile bump though.
Post by: ingeniousmonkey on Sun, 29 October 2017, 23:07:29
Thank you very much for all of you feedback.
Regarding "Fn key":
"Fn" combined keys are not programmable on our keyboard now. We will study and assess it. It needs to change the firmware of the keyboard. If we realized this function, our users may update their keyboards' firmware. We will try to realize this function, but we can't declare a schedule timeline for it yet.
Post by: pixelpusher on Mon, 30 October 2017, 02:15:48
Hello,
Thank you very much for all of you feedback.
Regarding "Fn key":
"Fn" combined keys are not programmable on our keyboard now. We will study and assess it. It needs to change the firmware of the keyboard. If we realized this function, our users may update their keyboards' firmware. We will try to realize this function, but we can't declare a schedule timeline for it yet.
Thanks! Yes a firmware update to allow Fn + key programming would be an immense improvement. Really like my board. It is very nice to have the hot swap and I enjoy the rgb leds.
Post by: ingeniousmonkey on Fri, 03 November 2017, 07:42:23
Hello,
Thank you very much for all of you feedback.
Regarding "Fn key":
"Fn" combined keys are not programmable on our keyboard now. We will study and assess it. It needs to change the firmware of the keyboard. If we realized this function, our users may update their keyboards' firmware. We will try to realize this function, but we can't declare a schedule timeline for it yet.
Thanks! Yes a firmware update to allow Fn + key programming would be an immense improvement. Really like my board. It is very nice to have the hot swap and I enjoy the rgb leds.
Thanks, glad to hear you like the hot swap and enjoy the RGB leds. And also thank you very much for your reviewing about the keyboard kit.
During the usage, if there are any advice or suggestion, please contact us freely. We'd like to receive the feedback from community, and improve our product more and more.Thank you.
Post by: stoic-lemon on Fri, 03 November 2017, 10:43:53
Post by: pixelpusher on Fri, 03 November 2017, 11:16:17
http://www.jikedingzhi.com/
Post by: ingeniousmonkey on Sat, 04 November 2017, 02:23:37
I believe this is the Chinese site for these boards. If anyone can translate well, there seems to be a community forum. Probably a good place to ask around.
http://www.jikedingzhi.com/
Jikedingzhi is our Chinese website. It is just for Chinese, it doesn't supply services to the guests outside China and retail buyer. So sorry, perhaps you can't receive reply from this website.
Post by: ingeniousmonkey on Sat, 04 November 2017, 02:42:46
Glad this project went off smoothly and they all seem like good keyboards. If they can manage to make them truly programmable, it would be fantastic. Hopefully ingeniousmonkey has some cunning codemonkeys working on this.
Hello, according to the feedback from the community, we are doing this working - program function layers: at the "W" "E" "R" 3 programmable layers, "Fn" combined keys can be programmable. After finished this working, we will release update firmware and software.
Excuse me, "some cunning codemonkeys working on this"? I am not very clearly about what you mean. Would you please explain it more details? If possible, we'd like to realize some special functions to fit some special person's or some special job's needs. Thank you.
Post by: stoic-lemon on Sat, 04 November 2017, 03:32:21
Glad this project went off smoothly and they all seem like good keyboards. If they can manage to make them truly programmable, it would be fantastic. Hopefully ingeniousmonkey has some cunning codemonkeys working on this.
Hello, according to the feedback from the community, we are doing this working: at the "W" "E" "R" 3 programmable layers, "Fn" combined keys can be programmable. After finished this working, we will release update firmware and software.
Excuse me, "some cunning codemonkeys working on this"? I am not very clearly about what you mean. Would you please explain it more details? If possible, we'd like to realize some special functions to fit some special person's or some special job's needs. Thank you.
Sorry, just my attempt at humour. Someone who writes code (programmers) are sometimes referred to as a 'code monkey'.
Post by: ingeniousmonkey on Sat, 04 November 2017, 03:49:13
Glad this project went off smoothly and they all seem like good keyboards. If they can manage to make them truly programmable, it would be fantastic. Hopefully ingeniousmonkey has some cunning codemonkeys working on this.
Hello, according to the feedback from the community, we are doing this working: at the "W" "E" "R" 3 programmable layers, "Fn" combined keys can be programmable. After finished this working, we will release update firmware and software.
Excuse me, "some cunning codemonkeys working on this"? I am not very clearly about what you mean. Would you please explain it more details? If possible, we'd like to realize some special functions to fit some special person's or some special job's needs. Thank you.
Sorry, just my attempt at humour. Someone who writes code (programmers) are sometimes referred to as a 'code monkey'.
:D
Post by: ingeniousmonkey on Sat, 04 November 2017, 04:01:28
Glad this project went off smoothly and they all seem like good keyboards. If they can manage to make them truly programmable, it would be fantastic. Hopefully ingeniousmonkey has some cunning codemonkeys working on this.
Hello, according to the feedback from the community, we are doing this working: at the "W" "E" "R" 3 programmable layers, "Fn" combined keys can be programmable. After finished this working, we will release update firmware and software.
Excuse me, "some cunning codemonkeys working on this"? I am not very clearly about what you mean. Would you please explain it more details? If possible, we'd like to realize some special functions to fit some special person's or some special job's needs. Thank you.
Sorry, just my attempt at humour. Someone who writes code (programmers) are sometimes referred to as a 'code monkey'.
In China, programmers are called code peasants. :D
Post by: pixelpusher on Sat, 04 November 2017, 08:59:51
Post by: Kung Fu Hung-Su on Wed, 08 November 2017, 10:49:27
I'm on Windows so I'll be trying TouchCursor to achieve what I want, but i really wanted this to work at the keyboard level.
ingeniousmonkey, I look forward to firmware and driver updates
Post by: ingeniousmonkey on Wed, 15 November 2017, 01:30:08
Received my iGK64, and like the rest of you was disappointed to see that the iGK does not support remapping of the Fn key, and also does not support any kind of function layer - only remapping and macro programming.
I'm on Windows so I'll be trying TouchCursor to achieve what I want, but i really wanted this to work at the keyboard level.
ingeniousmonkey, I look forward to firmware and driver updates
Sorry for bringing you inconvenience. Yes, we have been trying this "Fn function".... I believe very soon, we will have a update firmware and driver to resolve it.
Post by: ingeniousmonkey on Mon, 11 December 2017, 18:37:07
New firmware and driver software released!
For: New features - Custom “FnX” keys, import/export of macro and RGB light effects for iGK61, 61P, iGK62,and iGK64 keyboards
Details please read the top of this thread.
Post by: pixelpusher on Mon, 11 December 2017, 19:14:46
Post by: ingeniousmonkey on Tue, 12 December 2017, 04:03:43
Left the same comment on Reddit, but I just wanted to let people know that this is a very good value keyboard. Especially with the new firmware update. I liked mine so much that I just ordered an aluminum case for it. Although the plastic case is quite nice for $5.
So glad to hear that, thank you!
Post by: ingeniousmonkey on Fri, 22 December 2017, 07:10:45
The round 3 group buy for iGK61, iGK61P, iGK62, iGK64 and iMK11(104-key) begins.
GB Here (http://www.pc-100.com/diy-mechanical-keyboard-custom-kits-pcb/)
Post by: ingeniousmonkey on Mon, 25 December 2017, 02:32:02
For the similar models: iGK61, 61P, 62 and iGK64, iMK11(104-key):
GB Here (http://www.pc-100.com/diy-mechanical-keyboard-custom-kits-pcb/)
Post by: makhuyatz on Thu, 28 December 2017, 06:57:53
Or any other options/suggestions for me. TIA ;D
Edit: My question is, if i swap in a kailh box switch i wont have any problem with the rgb lighting of the kit?
Also im from Philippines, which i think epacket still does not support shipping, what courier will shoulder my order if i choose the economic shipping.
Post by: pixelpusher on Thu, 28 December 2017, 09:28:30
Hi guys! Just want to ask if the led are smd? I want to put on kailh box switches but it only supports smd led.
Or any other options/suggestions for me. TIA ;D
Edit: My question is, if i swap in a kailh box switch i wont have any problem with the rgb lighting of the kit?
Also im from Philippines, which i think epacket still does not support shipping, what courier will shoulder my order if i choose the economic shipping.
Yep, I have box blacks in mine right now. Light looks good.
Post by: makhuyatz on Thu, 28 December 2017, 10:26:37
Hi guys! Just want to ask if the led are smd? I want to put on kailh box switches but it only supports smd led.
Or any other options/suggestions for me. TIA ;D
Edit: My question is, if i swap in a kailh box switch i wont have any problem with the rgb lighting of the kit?
Also im from Philippines, which i think epacket still does not support shipping, what courier will shoulder my order if i choose the economic shipping.
Yep, I have box blacks in mine right now. Light looks good.
Sweet! Placed my preorder! Thanks!
Post by: ingeniousmonkey on Thu, 28 December 2017, 21:43:08
Hi guys! Just want to ask if the led are smd? I want to put on kailh box switches but it only supports smd led.
Or any other options/suggestions for me. TIA ;D
Edit: My question is, if i swap in a kailh box switch i wont have any problem with the rgb lighting of the kit?
Also im from Philippines, which i think epacket still does not support shipping, what courier will shoulder my order if i choose the economic shipping.
Yep, I have box blacks in mine right now. Light looks good.
Sweet! Placed my preorder! Thanks!
Thank you for your order.
Post by: ingeniousmonkey on Thu, 28 December 2017, 21:44:08
Hi guys! Just want to ask if the led are smd? I want to put on kailh box switches but it only supports smd led.
Or any other options/suggestions for me. TIA ;D
Edit: My question is, if i swap in a kailh box switch i wont have any problem with the rgb lighting of the kit?
Also im from Philippines, which i think epacket still does not support shipping, what courier will shoulder my order if i choose the economic shipping.
Yep, I have box blacks in mine right now. Light looks good.
Thank you for your help.
Post by: makhuyatz on Fri, 29 December 2017, 10:00:49
Post by: pixelpusher on Fri, 29 December 2017, 11:31:52
Post by: makhuyatz on Sat, 06 January 2018, 18:17:53
Post by: nickaster1 on Sat, 06 January 2018, 19:10:52
Sent from my iPhone using Tapatalk
Post by: Ragequit on Wed, 10 January 2018, 09:53:12
Hello everyone,
New firmware and driver software released!
For: New features - Custom “FnX” keys, import/export of macro and RGB light effects for iGK61, 61P, iGK62,and iGK64 keyboards
Details please read the top of this thread.
Thanks but it doesnt work.
And I dont understnand is FN the same as a offline profile?
Post by: ingeniousmonkey on Mon, 15 January 2018, 01:40:14
Whats the update on this gb? ;D
Hello, the GB order is in production. and will ship out on time (Jan 30th, 2018).
Post by: ingeniousmonkey on Mon, 15 January 2018, 01:47:24
Hello everyone,
New firmware and driver software released!
For: New features - Custom “FnX” keys, import/export of macro and RGB light effects for iGK61, 61P, iGK62,and iGK64 keyboards
Details please read the top of this thread.
Thanks but it doesnt work.
And I dont understnand is FN the same as a offline profile?
Hello, please leave message on our website, (http://www.pc-100.com/contact-us/)tell us your problem details, thus we can give you some help.
Post by: Paopawdecarabao on Mon, 15 January 2018, 04:49:59
Post by: Paopawdecarabao on Mon, 15 January 2018, 05:08:28
Post by: ingeniousmonkey on Mon, 15 January 2018, 08:58:36
Does the igk62 have the 2u Lshift or 2.25u LShift?
2.25u LShift.
Post by: ingeniousmonkey on Mon, 15 January 2018, 09:06:36
I can't seem to find an option for the igk62 with the optical switch in Silver. No drop down choice? Was trying to do a pcb + plate + cnc case green + usb cable and a silver optical switch.
Sorry, if you need optical switches in Silver, probably you only can do a pcb + plate + cnc case green + usb cable and a silver optical switch.
Post by: makhuyatz on Fri, 19 January 2018, 08:45:19
Post by: SugarJ on Wed, 31 January 2018, 12:29:05
Post by: ingeniousmonkey on Thu, 01 February 2018, 07:15:11
Still on schedule for shipment? Looking forward to receiving my kit!
All orders' shipment of round 3 GB has completed, you will receive your tracking number in 1~2 days.
Post by: nickaster1 on Thu, 01 February 2018, 08:09:41
Awesome work you guys! I would say that apart from the service you provide, some more tweaking for the software so it can be up there with QMK is a goal to makeStill on schedule for shipment? Looking forward to receiving my kit!
All orders' shipment of round 3 GB has completed, you will receive your tracking number in 1~2 days.
Post by: Ragequit on Fri, 02 February 2018, 11:42:38
I've tried something like this but it doesn't work
(https://i.imgur.com/emAQQx3.jpg)
idea was:
120 frames total
40 frames per breathing
so 3 breath per cycle that should sync with red, blue, green
Post by: SugarJ on Tue, 06 February 2018, 12:08:47
Post by: Ragequit on Thu, 08 February 2018, 11:51:48
Profiles and layers should be two different things, otherwise cant press FN without changing the light mode every single time, cant have dynamic lights on custom FN1, FN2 and only a single one, also probably less bugs.
Quote
Hello, please leave message on our website, tell us your problem details, thus we can give you some help.
I did. No answer after a couple weeks. I'm soon giving up on this board. I was considering getting a replacement PCB and metal case and more switches but not anymore I mean it's nice to have added the feature we asked but (at least for me) it doesnt work at all, yes nobody else commented maybe it's just me but who knows maybe it's because the other who also wanted FN rebind already moved on.
Post by: ingeniousmonkey on Thu, 08 February 2018, 21:36:16
Why is there no way to rebind FN (or anything) on the base layer? On the Fn1 layer you can't use the dynamic light modes or change light mode you're stuck with a single one
Profiles and layers should be two different things, otherwise cant press FN without changing the light mode every single time, cant have dynamic lights on custom FN1, FN2 and only a single one, also probably less bugs.QuoteHello, please leave message on our website, tell us your problem details, thus we can give you some help.
I did. No answer after a couple weeks. I'm soon giving up on this board. I was considering getting a replacement PCB and metal case and more switches but not anymore I mean it's nice to have added the feature we asked but (at least for me) it doesnt work at all, yes nobody else commented maybe it's just me but who knows maybe it's because the other who also wanted FN rebind already moved on.
Hello, we are in our Chinese New Year vacation now, so probably reply you a little late, sorry for it.
Some explanations for our iGK6X keyboards:
1)Currently, no settings can be changed in standard mode (so called "base layer").
2)In offline mode 1,2,3, users may set responding effect for each keys. The 5 playing light effects can only be set for standard mode and can not be played in offline mode 1,2,3. Users may enjoy playing the 5 light effects ("Fn" + "]}") in standard mode and we think it's not necessary to play the 5 light effects in every offline modes, the other reason of not playing 5 light effects in offline modes is that they may mix and confuse with the responding light effects set in the offline layer.
Post by: stryker09 on Fri, 09 February 2018, 19:11:57
Why is there no way to rebind FN (or anything) on the base layer? On the Fn1 layer you can't use the dynamic light modes or change light mode you're stuck with a single one
Profiles and layers should be two different things, otherwise cant press FN without changing the light mode every single time, cant have dynamic lights on custom FN1, FN2 and only a single one, also probably less bugs.QuoteHello, please leave message on our website, tell us your problem details, thus we can give you some help.
I did. No answer after a couple weeks. I'm soon giving up on this board. I was considering getting a replacement PCB and metal case and more switches but not anymore I mean it's nice to have added the feature we asked but (at least for me) it doesnt work at all, yes nobody else commented maybe it's just me but who knows maybe it's because the other who also wanted FN rebind already moved on.
yeah the fn layer remap is actually terrible, im considering to either sell it or just keep it as a tester board at this point, it is really hard to remap the keys to what i need to use daily.
Post by: Ragequit on Sat, 10 February 2018, 07:20:36
Hello, we are in our Chinese New Year vacation now
my bad forgot about that but do you know why I get "applying failed!" all the time?
Quote
yeah the fn layer remap is actually terrible
if you want a truely programmable board better look somewhere else
because
- Q, E, R or F (taken for profiles) light up white and can't remap them
- the light mode changes
- applying changes is bugged
Possible way to fix:
- make base layer customizable and FN layers not change light mode when activated,
- fix "apply fail!" and FnX bug
other than that great service and board
Post by: Ragequit on Mon, 26 February 2018, 08:44:49
Post by: ingeniousmonkey on Fri, 30 March 2018, 08:11:27
With new keycaps I notice the color wave is actually just a few key blobs cycling color at different intervals (7 blobs, same for windmill btw)
Sorry, i can not make it clear, would you please give more detailed description or image to show it clearly?
Post by: ingeniousmonkey on Fri, 30 March 2018, 08:12:27
Hello, we are in our Chinese New Year vacation now
my bad forgot about that but do you know why I get "applying failed!" all the time?Quoteyeah the fn layer remap is actually terrible
if you want a truely programmable board better look somewhere else
because
- Q, E, R or F (taken for profiles) light up white and can't remap them
- the light mode changes
- applying changes is bugged
Possible way to fix:
- make base layer customizable and FN layers not change light mode when activated,
- fix "apply fail!" and FnX bug
other than that great service and board
- Q, E, R or F (taken for profiles) light up white and can't remap them
-----the updated firmware had changed this.
"apply fail!"
-----This means may be the driver software is newer than the firmware, you may download the new firmware from our website and update your firmware to fit for the new driver software.
Post by: ingeniousmonkey on Sun, 08 April 2018, 01:34:20
Post by: ingeniousmonkey on Thu, 03 May 2018, 04:10:35
Post by: ingeniousmonkey on Sat, 09 June 2018, 08:59:26
Post by: ingeniousmonkey on Fri, 20 July 2018, 10:29:16
The round 9 group buy begins.
More new items launched for this round GB! Such as 68 layout, custom wooden keyboard case, 2018 arc aluminum case, custom PBT dye-subbed DSA keycaps, Gateron yellow optical switch...
Welcome any feedback to us, so that we can improve these products more and more. Thanks in advance for all of you!
Post by: Jkush463 on Wed, 25 July 2018, 17:22:25
Post by: ingeniousmonkey on Sat, 28 July 2018, 08:16:27
is the IGK68 compatible with any other cases besides the new 2018 case?
Hello,
Only the new 2018 case available, no other cases optional for iGK68 in this GB.
Post by: duckysh on Sat, 18 August 2018, 21:24:25
Post by: ingeniousmonkey on Tue, 17 September 2019, 10:01:00
New Group buy Begins:
This group buy is for iGK 2019 new products: bluetooth hotswap keyboards & DIY kits,PCB， new custom aluminum case, GSA profile dye-subbed PBT keycaps， invented fiber glass plate...
Post by: pixelpusher on Tue, 17 September 2019, 10:58:11
I want to purchase a polycarbonate case, fiberglass plate (with gateron stabilizers) and Bluetooth 61key pcb. I don’t see that option as a package anywhere. Do I just buy them individually?
Post by: ingeniousmonkey on Wed, 18 September 2019, 09:28:34
Interesting new items. Does the 61key Bluetooth board also have some RGB lights underneath to provide underglow on the polycarbonate case? I think it said the 64 did but I can’t find it mentioned on the 61.
I want to purchase a polycarbonate case, fiberglass plate (with gateron stabilizers) and Bluetooth 61key pcb. I don’t see that option as a package anywhere. Do I just buy them individually?
Hello,
Sorry, by now, 61 don't have some RGB lights underneath to provide underglow on the polycarbonate case. If you like this kind of item, probably you only can choose 64 kit from here: https://www.epathbuy.com/product/gk64s-wireless-modular-keyboard-kit-built-2019-arris-semitransparent-polycarb-case-igk64s-bt-kit18/
Post by: ingeniousmonkey on Mon, 23 September 2019, 09:05:03
Post by: thegoobs on Mon, 23 September 2019, 10:23:24
Post by: pixelpusher on Mon, 23 September 2019, 12:30:37
Just went and ordered one of the new barebones kits, this is exactly the kind of thing I was looking for to get started on my first build. ;D
Pretty nice boards. The software isn't perfect, but it does the job. Really a good value, overall.
Post by: ingeniousmonkey on Thu, 26 September 2019, 09:49:56
Just went and ordered one of the new barebones kits, this is exactly the kind of thing I was looking for to get started on my first build. ;D
Thank you. Hope you will like it ;D
Post by: ingeniousmonkey on Thu, 26 September 2019, 09:53:10
Just went and ordered one of the new barebones kits, this is exactly the kind of thing I was looking for to get started on my first build. ;D
Pretty nice boards. The software isn't perfect, but it does the job. Really a good value, overall.
Thank you ;D