Author Topic: [IC] Titanium Spacebar  (Read 30382 times)

0 Members and 1 Guest are viewing this topic.

Offline feng

  • * Vendor
  • Thread Starter
  • Posts: 925
[IC] Titanium Spacebar
« on: Sat, 04 August 2012, 13:12:24 »
Finally got the chance to bring over more titanium spacebar. I'll start the order thread once we have at least 10 people interested.

Two options for the height: OEM profile and Cherry profile. OEM is a bit higher than Cherry. And FYI those SP's spacebars from many of the doubleshot keycaps group buys here have the same height as Cherry's.

On the left side, it's the spacebar from tsangan's green cream cheese keyset. On the right side, it's an OEM titanium spacebar.
1245-0


And you have three options for choosing the appearance.

1. Shiny
2. Sandblasted
3. Brushed Finish

Shiny Titanium Spacebar
1247-11249-2

Brushed Finish Ti Spacebar
1251-3

The sandblasted ones will look like these:
1266-4

The price will be $100 for each.


« Last Edit: Fri, 19 October 2012, 23:30:14 by reaper »

Offline mkawa

  •  No Marketplace Access
  • Posts: 6562
  • (ツ)@@@. crankypants
Re: [Interest Check] Titanium Spacebar
« Reply #1 on: Sat, 04 August 2012, 15:24:47 »
technically i have an automatic first post, so keep that in mind when distributing, but i do want one. i think i'd want shiny, but again, i had an auto first post, so i'm fine with my request being superceded by another member :)

also, wire whatever = brushed finish

one sec, i'll allow more attachments per post

edit: ok, you can add as many attachments as you want to the OP
« Last Edit: Sat, 04 August 2012, 15:35:37 by mkawa »

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline MMB

  • I no longer use this account. Please email me.
  • Posts: 1162
Re: [Interest Check] Titanium Spacebar
« Reply #2 on: Sat, 04 August 2012, 15:25:33 »
I am in for 1. kthx

:)

Offline longweight

  • philanthropist
  • Posts: 1494
Re: [Interest Check] Titanium Spacebar
« Reply #3 on: Sat, 04 August 2012, 15:27:36 »
Can we see the sandblasted one too please? I Will be in for a brushed and sand blasted one if the finish is awesome, both cherry :)

I take it that they are 6.25?
« Last Edit: Sat, 04 August 2012, 15:29:41 by longweight »

Offline Djuzuh

  • Posts: 1127
Re: [Interest Check] Titanium Spacebar
« Reply #4 on: Sat, 04 August 2012, 15:30:13 »
I'll maybe take one, not sure yet.

100$ is a nasty price. Expecially since the € is currently very low :x

Offline longweight

  • philanthropist
  • Posts: 1494
Re: [Interest Check] Titanium Spacebar
« Reply #5 on: Sat, 04 August 2012, 15:31:03 »
I'll maybe take one, not sure yet.

100$ is a nasty price. Expecially since the € is currently very low :x

Metal caps are never cheap but always worth it!

Offline i3oilermaker

  • * Vendor
  • Posts: 2362
  • Location: Chicago
  • techkeys.us
    • TechKeys
Re: [Interest Check] Titanium Spacebar
« Reply #6 on: Sat, 04 August 2012, 15:32:35 »
I would be in for at least 1 - probably 2

Offline Djuzuh

  • Posts: 1127
Re: [Interest Check] Titanium Spacebar
« Reply #7 on: Sat, 04 August 2012, 15:34:42 »
I'll maybe take one, not sure yet.

100$ is a nasty price. Expecially since the € is currently very low :x

Metal caps are never cheap but always worth it!

Sure.

But that's another 100$ spent in a hobby I already spent to much into xD.

Offline Glissant

  • Posts: 1976
  • Location: Oslo, Norway
Re: [Interest Check] Titanium Spacebar
« Reply #8 on: Sat, 04 August 2012, 15:34:57 »
I'll grab one :). Have to have that spacebar!
Cherry profile, please.

Ps: please get back to me about the stuff you haven't sent me yet. Been waiting patiently.
« Last Edit: Sat, 04 August 2012, 18:20:57 by Glissant »

Offline mkawa

  •  No Marketplace Access
  • Posts: 6562
  • (ツ)@@@. crankypants
Re: [Interest Check] Titanium Spacebar
« Reply #9 on: Sat, 04 August 2012, 15:36:12 »
I'll maybe take one, not sure yet.

100$ is a nasty price. Expecially since the € is currently very low :x

Metal caps are never cheap but always worth it!

Sure.

But that's another 100$ spent in a hobby I already spent to much into xD.
ho ho ho. no such thing as "too much"!

(ok, that's almost certainly not true, but TITANIUM SIR)

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline Djuzuh

  • Posts: 1127
Re: [Interest Check] Titanium Spacebar
« Reply #10 on: Sat, 04 August 2012, 15:36:36 »
Do you have unlimited supply or do we need to battle over those? :o

Offline silat

  • Posts: 168
  • Location: Oregon
Re: [Interest Check] Titanium Spacebar
« Reply #11 on: Sat, 04 August 2012, 15:39:26 »
OEM or Cherry to match Deck, Filco and WASD?
Im probably in..
Fighting the Christian American Taliban daily with my Deck Legend loaded with Cherry MX Clears //
Deck Legend Ice Clears // Deck Legend Frost Clears // Ducky Shining Purple Browns//QPAD MK85 Browns //

Offline Djuzuh

  • Posts: 1127
Re: [Interest Check] Titanium Spacebar
« Reply #12 on: Sat, 04 August 2012, 15:41:01 »
OEM or Cherry to match Deck, Filco and WASD?
Im probably in..

OEM will match the default keycaps.

Cherry will match the SP keycaps or the cherry keycaps, if you ever think of changing them.

If you don't know, I recommand you to choose the cherry profile. You'll buy another set of caps one day.

Offline longweight

  • philanthropist
  • Posts: 1494
Re: [Interest Check] Titanium Spacebar
« Reply #13 on: Sat, 04 August 2012, 15:42:17 »
This will go with my scarface caps so well!

MMMMMMMMM!

Offline mm87

  • Posts: 88
  • Location: CZ
Re: [Interest Check] Titanium Spacebar
« Reply #14 on: Sat, 04 August 2012, 15:52:56 »
Definitely in for one of these babies!

Offline Christown

  • Posts: 65
  • Location: Australia
  • MX Blue >
Re: [Interest Check] Titanium Spacebar
« Reply #15 on: Sat, 04 August 2012, 15:57:04 »
In for one.

They looks awesome.
« Last Edit: Mon, 06 August 2012, 13:23:05 by Christown »

Offline DanGWanG

  • Posts: 1612
  • Location: Chicago
  • Higher Standards
    • DanGWanG's Keyboard Blog
Re: [Interest Check] Titanium Spacebar
« Reply #16 on: Sat, 04 August 2012, 17:50:40 »
In for one but only if cherry profile

Offline Djuzuh

  • Posts: 1127
Re: [Interest Check] Titanium Spacebar
« Reply #17 on: Sat, 04 August 2012, 17:52:28 »
**** it, I'll take a cherry profile one.

Offline i3oilermaker

  • * Vendor
  • Posts: 2362
  • Location: Chicago
  • techkeys.us
    • TechKeys
Re: [Interest Check] Titanium Spacebar
« Reply #18 on: Sat, 04 August 2012, 17:53:31 »
I think we have 10 - lets get to ordering! :)

Offline The_Beast

  • * Maker
  • Posts: 3964
  • Location: Wisconsin
  • I like wood ಠ_๏
Re: [Interest Check] Titanium Spacebar
« Reply #19 on: Sat, 04 August 2012, 18:15:56 »
In for one Cherry pls ;D
Vendor Status: Sadly, not taking any orders/pre-orders at this time

Vendor Quick Links: | Vendor Forum | Hardwood Wrist Rests | Hardwood 60% Cases | Customer Gallery | Giveaway |

Offline jil_jil32

  • * Esteemed Elder
  • Posts: 1338
  • Location: Hanoi, Vietnam
  • Tokyo Press <3
Re: [Interest Check] Titanium Spacebar
« Reply #20 on: Sat, 04 August 2012, 23:20:36 »
I'm in for one, Cherry profile - and brushed finish.
Need moarrr pics please!!! <3

Offline Harlequin

  • Posts: 69
  • Location: Sydney, Australia
Re: [Interest Check] Titanium Spacebar
« Reply #21 on: Sat, 04 August 2012, 23:58:56 »
just wondering, is winkeyless spacebar also available?


DK Saver Winkeyless | Leopold FC700R | Ducky DK9087 Shine 2

Offline DanGWanG

  • Posts: 1612
  • Location: Chicago
  • Higher Standards
    • DanGWanG's Keyboard Blog
Re: Re: [Interest Check] Titanium Spacebar
« Reply #22 on: Sun, 05 August 2012, 00:03:00 »
just wondering, is winkeyless spacebar also available?

I'd also like to know. 

Offline jrockroll

  • Posts: 199
Re: [Interest Check] Titanium Spacebar
« Reply #23 on: Sun, 05 August 2012, 00:27:21 »
looks very nice... might be in for one...might...be...

Offline MMB

  • I no longer use this account. Please email me.
  • Posts: 1162
Re: [Interest Check] Titanium Spacebar
« Reply #24 on: Sun, 05 August 2012, 00:56:21 »

The spray sand ones will look like these:

(Attachment Link)

I will take some of these, also :D

Offline dorkvader

  • Posts: 6288
  • Location: Boston area
  • all about the "hack" in "geekhack"
Re: [Interest Check] Titanium Spacebar
« Reply #25 on: Sun, 05 August 2012, 01:04:43 »
I'm interested in one.

Titanium spacebars are a great way to lighten the heavier spacebar switches.

Offline Lethal Squirrel

  • Posts: 460
  • Location: Michigan
  • I <3 60%
Re: [Interest Check] Titanium Spacebar
« Reply #26 on: Sun, 05 August 2012, 01:11:54 »
I would be in for one. I'm diggin the brushed finish!

fartq

  •  Guest
Re: [Interest Check] Titanium Spacebar
« Reply #27 on: Sun, 05 August 2012, 01:26:30 »
technically i have an automatic first post, so keep that in mind when distributing, but i do want one. i think i'd want shiny, but again, i had an auto first post, so i'm fine with my request being superceded by another member :)

also, wire whatever = brushed finish

one sec, i'll allow more attachments per post

edit: ok, you can add as many attachments as you want to the OP
to be clear, i'd like a cherry profile shiny space

man, the sandblasted keys look really nice too..
« Last Edit: Sun, 05 August 2012, 02:28:47 by mkawa »

Offline longweight

  • philanthropist
  • Posts: 1494
Re: [Interest Check] Titanium Spacebar
« Reply #28 on: Sun, 05 August 2012, 01:31:38 »
Feng can you get those modifiers?!

Offline mehkat1974

  • Posts: 191
Re: [Interest Check] Titanium Spacebar
« Reply #29 on: Sun, 05 August 2012, 01:32:37 »
definitely in for one I have been hanging out for this for ages
bring it on
HHKB Type-S / KBC Poker with reds

Offline longweight

  • philanthropist
  • Posts: 1494
Re: [Interest Check] Titanium Spacebar
« Reply #30 on: Sun, 05 August 2012, 01:40:59 »
Changed my mind, in for one of each :)

Offline mistakemistake

  • Global Loveinator
  • Posts: 373
Re: [Interest Check] Titanium Spacebar
« Reply #31 on: Sun, 05 August 2012, 02:49:57 »
available for topre?

Offline MMB

  • I no longer use this account. Please email me.
  • Posts: 1162
Re: [Interest Check] Titanium Spacebar
« Reply #32 on: Sun, 05 August 2012, 03:01:43 »
Feng, get us the modifiers too, please? :) :) :)

Offline longweight

  • philanthropist
  • Posts: 1494
Re: [Interest Check] Titanium Spacebar
« Reply #33 on: Sun, 05 August 2012, 03:13:36 »
Feng, get us the modifiers too, please? :) :) :)

This +1,000,000!

ANSI please!

Offline Djuzuh

  • Posts: 1127
Re: [Interest Check] Titanium Spacebar
« Reply #34 on: Sun, 05 August 2012, 03:17:09 »
Feng, get us the modifiers too, please? :) :) :)

This +1,000,000!

ANSI please!

Isn't your keyboard heavy enough already? :P.

Offline longweight

  • philanthropist
  • Posts: 1494
Re: [Interest Check] Titanium Spacebar
« Reply #35 on: Sun, 05 August 2012, 03:19:16 »
Feng, get us the modifiers too, please? :) :) :)

This +1,000,000!

ANSI please!

Isn't your keyboard heavy enough already? :P.

Mine? Not yet :P

Offline feng

  • * Vendor
  • Thread Starter
  • Posts: 925
Re: [Interest Check] Titanium Spacebar
« Reply #36 on: Sun, 05 August 2012, 03:43:04 »
To be clear, these are 6.25 units spacebar. And I don't have plan to get some 7 units ones yet.

I'm still talking to the producer, to see if it's possible to make 4-6 stems inside. He said for Cherry profile, 6 stems should be fine, but for OEM profile, 6 stems could be a bit too heavy. Maybe 4 stems will work with OEM profile.

Anyway we're still working on it and waiting for his response about the price. More stems might cost more handing or whatever fees, but I think it's worth.

He will get back to me tomorrow morning. And then I should be able to get the ordering started.

Modifiers... hmmm, I want them so much for myself too. But he doesn't have time yet, after September, I'll ask him again to see if we can get some modifiers.

Offline feng

  • * Vendor
  • Thread Starter
  • Posts: 925
Re: [Interest Check] Titanium Spacebar
« Reply #37 on: Sun, 05 August 2012, 03:48:06 »
BTW, get ready for the "geek hack" aluminum backspace and R4 keycaps guys. :P

Offline longweight

  • philanthropist
  • Posts: 1494
Re: [Interest Check] Titanium Spacebar
« Reply #38 on: Sun, 05 August 2012, 03:52:38 »
Can we start ordering these yet?!

Offline feng

  • * Vendor
  • Thread Starter
  • Posts: 925
Re: [Interest Check] Titanium Spacebar
« Reply #39 on: Sun, 05 August 2012, 03:59:14 »
Please wait for 8 hours when I get the final price and be clear about the stems. :)

Offline longweight

  • philanthropist
  • Posts: 1494
Re: [Interest Check] Titanium Spacebar
« Reply #40 on: Sun, 05 August 2012, 04:02:34 »
Ok, thanks feng!

Offline GMC

  • Posts: 260
  • Location: London, UK
  • Shiny.
Re: [Interest Check] Titanium Spacebar
« Reply #41 on: Sun, 05 August 2012, 04:23:04 »
Reckon i'll be up for this.
Probably take 2 shiny ones.  8)

Edit: if other metal caps can be bought at the same time then will buy as much as I can afford! Arrived way to late to get in on scarface caps
« Last Edit: Sun, 05 August 2012, 04:31:04 by GMC »
WASD V1 - waiting on R4... - MX Brown
KBT Pure - Zinc caps - MX Brown
Cherry G80-1800 ISO WKL - SkiData caps - MX Clear

Offline Elrick

  • Hype Master
  • Posts: 4895
  • Location: CrapTown, Convict Settlement
  • Keyboard Orgasmist
Re: [Interest Check] Titanium Spacebar
« Reply #42 on: Sun, 05 August 2012, 04:43:11 »
Please wait for 8 hours when I get the final price and be clear about the stems. :)

Dear Feng, put me down for 2 (TWO) Brushed Finish Ti Spacebars.  I wet myself when I saw your posting to this.  :o

Of course if and when the modifiers are available as well, I'll buy two of everything.........EVERYTHING.  ;D
« Last Edit: Sun, 05 August 2012, 04:45:01 by Elrick »

Offline longweight

  • philanthropist
  • Posts: 1494
Re: [Interest Check] Titanium Spacebar
« Reply #43 on: Sun, 05 August 2012, 05:12:33 »
Reckon i'll be up for this.
Probably take 2 shiny ones.  8)

Edit: if other metal caps can be bought at the same time then will buy as much as I can afford! Arrived way to late to get in on scarface caps

They weren't available outside Korea ;)

Offline Christown

  • Posts: 65
  • Location: Australia
  • MX Blue >
Re: [Interest Check] Titanium Spacebar
« Reply #44 on: Sun, 05 August 2012, 05:22:53 »
Really digging the look of the sandblasted one but also the brushed.... decisions.. might have to get both even though my wallet won't like it.

Offline Djuzuh

  • Posts: 1127
Re: [Interest Check] Titanium Spacebar
« Reply #45 on: Sun, 05 August 2012, 05:33:44 »
Really digging the look of the sandblasted one but also the brushed.... decisions.. might have to get both even though my wallet won't like it.

I'm pretty sure you can sell the one you don't like at minimal loss after a few years.

Offline feng

  • * Vendor
  • Thread Starter
  • Posts: 925
Re: [Interest Check] Titanium Spacebar
« Reply #46 on: Sun, 05 August 2012, 05:41:57 »
Please wait for 8 hours when I get the final price and be clear about the stems. :)

Dear Feng, put me down for 2 (TWO) Brushed Finish Ti Spacebars.  I wet myself when I saw your posting to this.  :o

Of course if and when the modifiers are available as well, I'll buy two of everything.........EVERYTHING.  ;D

I used to think about getting a full titanium keyset, but I gave up when I found out the price might cost more than $2000. I'd prefer using this money to travel around America again. :P


Update: 7x spacebar should be able to happen, I'll ask my friend to send a sample 7x spacebar to the producer.

Offline alixinhzai

  • Posts: 217
  • Location: HN - VietNam
Re: [Interest Check] Titanium Spacebar
« Reply #47 on: Sun, 05 August 2012, 05:50:28 »
full titanium keyboad  :o i think i need a spacebar and a backsapce :))

Offline longweight

  • philanthropist
  • Posts: 1494
Re: [Interest Check] Titanium Spacebar
« Reply #48 on: Sun, 05 August 2012, 05:53:33 »
Really digging the look of the sandblasted one but also the brushed.... decisions.. might have to get both even though my wallet won't like it.

I'm pretty sure you can sell the one you don't like at minimal loss after a few years.

It won't be at a loss ;)

Offline Djuzuh

  • Posts: 1127
Re: [Interest Check] Titanium Spacebar
« Reply #49 on: Sun, 05 August 2012, 06:01:52 »
Really digging the look of the sandblasted one but also the brushed.... decisions.. might have to get both even though my wallet won't like it.

I'm pretty sure you can sell the one you don't like at minimal loss after a few years.

It won't be at a loss ;)

Depends.

Price will only go up if htere is no other offer.

Maybe feng will be able to produce and sell those all year around, or maybe another actor will be able to do so.

I also don't like the idea of speculating over keycaps. Buying them to keep them available for people who missed a GB is great and I'm thankfull for the people who do. But if the intend is profit, it isn't.

Offline damorgue

  • Posts: 1176
  • Location: Sweden
    • Personal portfolio
Re: [Interest Check] Titanium Spacebar
« Reply #50 on: Sun, 05 August 2012, 06:10:25 »
Please wait for 8 hours when I get the final price and be clear about the stems. :)

Dear Feng, put me down for 2 (TWO) Brushed Finish Ti Spacebars.  I wet myself when I saw your posting to this.  :o

Of course if and when the modifiers are available as well, I'll buy two of everything.........EVERYTHING.  ;D

I used to think about getting a full titanium keyset, but I gave up when I found out the price might cost more than $2000. I'd prefer using this money to travel around America again. :P


Update: 7x spacebar should be able to happen, I'll ask my friend to send a sample 7x spacebar to the producer.

I could get you a full titanium set for waaay less.
I sort of want one of yours for comparison.

Offline Djuzuh

  • Posts: 1127
Re: [Interest Check] Titanium Spacebar
« Reply #51 on: Sun, 05 August 2012, 06:13:52 »
Please wait for 8 hours when I get the final price and be clear about the stems. :)

Dear Feng, put me down for 2 (TWO) Brushed Finish Ti Spacebars.  I wet myself when I saw your posting to this.  :o

Of course if and when the modifiers are available as well, I'll buy two of everything.........EVERYTHING.  ;D

I used to think about getting a full titanium keyset, but I gave up when I found out the price might cost more than $2000. I'd prefer using this money to travel around America again. :P


Update: 7x spacebar should be able to happen, I'll ask my friend to send a sample 7x spacebar to the producer.

I could get you a full titanium set for waaay less.
I sort of want one of yours for comparison.

Ask longweight nicely to ship you some of his scarfaces keys, if you want to sample them. (Maybe lend him some money as safety to make sure they return?)

Also, when will your own project move forward? :p
« Last Edit: Sun, 05 August 2012, 06:15:54 by Djuzuh »

Offline damorgue

  • Posts: 1176
  • Location: Sweden
    • Personal portfolio
Re: [Interest Check] Titanium Spacebar
« Reply #52 on: Sun, 05 August 2012, 06:41:33 »
Scarface's were aluminum and thus easy to machine and polish (and consequently, not very wear-resistant)

This is a different league.

Edit: PM sent to feng
« Last Edit: Sun, 05 August 2012, 07:11:22 by damorgue »

Offline longweight

  • philanthropist
  • Posts: 1494
Re: [Interest Check] Titanium Spacebar
« Reply #53 on: Sun, 05 August 2012, 07:20:52 »
Scarface's were aluminum and thus easy to machine and polish (and consequently, not very wear-resistant)


This is a different league.

Edit: PM sent to feng

Scarface caps are not machined.

Offline damorgue

  • Posts: 1176
  • Location: Sweden
    • Personal portfolio
Re: [Interest Check] Titanium Spacebar
« Reply #54 on: Sun, 05 August 2012, 07:34:44 »
Scarface's were aluminum and thus easy to machine and polish (and consequently, not very wear-resistant)


This is a different league.

Edit: PM sent to feng

Scarface caps are not machined.

Totally forgot that they are cast. Still not relevant for me though, I just want to know about the finishing of titanium since it has proven to be difficult to get them polished.

Offline el2k

  • Posts: 128
  • Location: UK
Re: [Interest Check] Titanium Spacebar
« Reply #55 on: Sun, 05 August 2012, 10:32:23 »
Interested in a shiny one if it will fit my Leopold FC200RT? Not sure on the stem spacing?
sc00pz for life

Offline danielucf

  • Horrible Mailman
  • * Elevated Elder
  • Posts: 2479
  • Location: Orlando
  • Hmmmm beer.
Re: [Interest Check] Titanium Spacebar
« Reply #56 on: Sun, 05 August 2012, 15:32:25 »
Will this fit on a KBT Pure? And which finish will look best with the SC2 Titanium keys?
VE.A 67g Zealios | GH60 MX Clears |

Offline KylJoy

  • Posts: 140
  • Location: Kansas
Re: [Interest Check] Titanium Spacebar
« Reply #57 on: Sun, 05 August 2012, 17:13:51 »
Wow.  I'd like one Cherry profile sandblasted and one Cherry profile brushed.

Offline jcrouse

  • Posts: 709
  • Location: Missouri, USA
Re: [Interest Check] Titanium Spacebar
« Reply #58 on: Sun, 05 August 2012, 17:28:25 »
I too would be in for one Cherry profile of whatever matches the titanium SC caps from feng. I think the same request was mabe above.

Thanks,
John

Offline ishtob

  • Posts: 514
  • Location: Boston,MA
Re: [Interest Check] Titanium Spacebar
« Reply #59 on: Sun, 05 August 2012, 21:00:06 »
will be interested in 1-2 also

Offline feng

  • * Vendor
  • Thread Starter
  • Posts: 925
Re: [Interest Check] Titanium Spacebar
« Reply #60 on: Mon, 06 August 2012, 05:37:16 »
6 stems might cost $10 more than the 3 stems spacebar, and 4 stems might cost $4 more. I don't think people would care about this $10 since the spacebar is already $100.

What do you guys think? Let's make it 6 stems? FYI, 6 stems should be fine with cherry profile, but still not sure if 6 stems would be too heavy for the OEM profile yet.

Offline longweight

  • philanthropist
  • Posts: 1494
Re: [Interest Check] Titanium Spacebar
« Reply #61 on: Mon, 06 August 2012, 06:59:57 »
I just want standard Filco mounts, not too happy if I have to pay more but I know that I will.

fartq

  •  Guest
Re: [Interest Check] Titanium Spacebar
« Reply #62 on: Mon, 06 August 2012, 07:51:53 »
feng, since you have far fewer caps than orders, can you decide who is in on the gb first, and then query them as to their stem requirements? unfortunately, it sounds like you will simply have to decide who to sell to before you can get an accurate count of compatibility requirements...

Offline GMC

  • Posts: 260
  • Location: London, UK
  • Shiny.
Re: Re: [Interest Check] Titanium Spacebar
« Reply #63 on: Mon, 06 August 2012, 15:51:19 »
I just want standard Filco mounts, not too happy if I have to pay more but I know that I will.

same here. For my wasd board and/or Pure
WASD V1 - waiting on R4... - MX Brown
KBT Pure - Zinc caps - MX Brown
Cherry G80-1800 ISO WKL - SkiData caps - MX Clear

Offline Djuzuh

  • Posts: 1127
Re: [Interest Check] Titanium Spacebar
« Reply #64 on: Mon, 06 August 2012, 15:55:09 »
same.

Filco all the way.

Offline WyldKard

  • Posts: 12
[Interest Check] Titanium Spacebar
« Reply #65 on: Mon, 06 August 2012, 17:27:32 »
Would any of these fit a Poker?

Also, another vote for a Topre version!

Offline DanGWanG

  • Posts: 1612
  • Location: Chicago
  • Higher Standards
    • DanGWanG's Keyboard Blog
Re: [Interest Check] Titanium Spacebar
« Reply #66 on: Mon, 06 August 2012, 17:38:05 »
7x, 3 stems, Cherry profile, gogo =)

Offline danielucf

  • Horrible Mailman
  • * Elevated Elder
  • Posts: 2479
  • Location: Orlando
  • Hmmmm beer.
Re: [Interest Check] Titanium Spacebar
« Reply #67 on: Mon, 06 August 2012, 18:02:50 »
How many of these would have to be ordered to bring the prices down? Or is the idea to keep them rare like CCs?
VE.A 67g Zealios | GH60 MX Clears |

fartq

  •  Guest
[Interest Check] Titanium Spacebar
« Reply #68 on: Mon, 06 August 2012, 18:14:16 »
for various reasons these can't really be made in volume, so there's no quantity discount

Offline danielucf

  • Horrible Mailman
  • * Elevated Elder
  • Posts: 2479
  • Location: Orlando
  • Hmmmm beer.
Re: [Interest Check] Titanium Spacebar
« Reply #69 on: Mon, 06 August 2012, 18:28:37 »
for various reasons these can't really be made in volume, so there's no quantity discount

  ┌─┐ 
  ┴─┴ 
  ಠ_ರೃ 

Well I want one so put me down before they are all gone. I also feel entitled to one because I have SC2 titanium Key  :P
VE.A 67g Zealios | GH60 MX Clears |

Offline feng

  • * Vendor
  • Thread Starter
  • Posts: 925
Re: [Interest Check] Titanium Spacebar
« Reply #70 on: Mon, 06 August 2012, 19:27:09 »
feng, since you have far fewer caps than orders, can you decide who is in on the gb first, and then query them as to their stem requirements? unfortunately, it sounds like you will simply have to decide who to sell to before you can get an accurate count of compatibility requirements...

I'm still talking to the producer to see if it's possible to make all kinds of stems including 3 stems, 4 stems, and 6 stems. If not, we'll then talk about which way would be more acceptable for most people.

I was about to bring over 20 pieces of Ti spacebar, but it seems like there's more demands than I expected. I'll let you guys know if it's possible to get more this time.

Offline feng

  • * Vendor
  • Thread Starter
  • Posts: 925
Re: [Interest Check] Titanium Spacebar
« Reply #71 on: Mon, 06 August 2012, 19:29:22 »
How many of these would have to be ordered to bring the prices down? Or is the idea to keep them rare like CCs?

Well, it's not like we're keeping it rare, it's that we can't make many of them because they are all polished by hand. So there's no quantity discount as mkawa said.

Offline The_Beast

  • * Maker
  • Posts: 3964
  • Location: Wisconsin
  • I like wood ಠ_๏
Re: [Interest Check] Titanium Spacebar
« Reply #72 on: Mon, 06 August 2012, 19:37:29 »
Could we order them unpolished. I could polish my own
Vendor Status: Sadly, not taking any orders/pre-orders at this time

Vendor Quick Links: | Vendor Forum | Hardwood Wrist Rests | Hardwood 60% Cases | Customer Gallery | Giveaway |

Offline MMB

  • I no longer use this account. Please email me.
  • Posts: 1162
Re: [Interest Check] Titanium Spacebar
« Reply #73 on: Mon, 06 August 2012, 19:39:10 »

Offline The_Beast

  • * Maker
  • Posts: 3964
  • Location: Wisconsin
  • I like wood ಠ_๏
Re: [Interest Check] Titanium Spacebar
« Reply #74 on: Mon, 06 August 2012, 19:42:57 »
Vendor Status: Sadly, not taking any orders/pre-orders at this time

Vendor Quick Links: | Vendor Forum | Hardwood Wrist Rests | Hardwood 60% Cases | Customer Gallery | Giveaway |

Offline The_Ed

  • Posts: 1350
  • Location: MN - USA
  • Asperger's... SQUIRREL! I'm Anal Retentive *****!
Re: [Interest Check] Titanium Spacebar
« Reply #75 on: Mon, 06 August 2012, 23:24:10 »
1x shiny in cherry profile with 4-6 stems so it can fit my G80-3494LYCUS-2.

I NEEDS THE PRECIOUS!
Reaper "frelled" me... Twice... Did he "frell" you too?... *brohug*
I'm camping for a week, and moving twice in a month. I'll get back to you when I can (If I don't then just send me another PM).
R.I.P.ster

Offline mkawa

  •  No Marketplace Access
  • Posts: 6562
  • (ツ)@@@. crankypants
Re: [Interest Check] Titanium Spacebar
« Reply #76 on: Mon, 06 August 2012, 23:29:23 »

to all the brilliant friends who have left us, and all the students who climb on their shoulders.