SS and aluminum plate
I made a mistake. I will correct it. Only aluminum plate can be choosed. Thanks bro.QuoteSS and aluminum plate
Do I receive both? Because in the order sheet I don't see an option to specify which I want
I made a mistake. I will correct it. Only aluminum plate can be choosed. Thanks bro.QuoteSS and aluminum plate
Do I receive both? Because in the order sheet I don't see an option to specify which I want
Just wanted to check if shipping for just the Camp Pad is the same?As the same as only buy Camp C225
I don't think I saw this in the IC, but which program do the pcbs use and are they holtite compatible?Bootmapper
I don't think I saw this in the IC, but which program do the pcbs use and are they holtite compatible?Bootmapper
I don't think I saw this in the IC, but which program do the pcbs use and are they holtite compatible?Bootmapper
So are you partnered with winkeyless?
http://winkeyless.kr/partner/
The order form does not have a section for WKL vs WK, do we need to specify that in the notes section?I was kinda thinking of the same thing, but even all the pics they have in OP is of WKL.
Our team is contacting with winkeyless for authorization. If we don't get it, we will select TMK.I don't think I saw this in the IC, but which program do the pcbs use and are they holtite compatible?Bootmapper
So are you partnered with winkeyless?
http://winkeyless.kr/partner/
The order form does not have a section for WKL vs WK, do we need to specify that in the notes section?I will add it. Thanks a lot.
Do MAO colors cost extra or the same as other colors?Sorry, we only provide two colors.
In for a case and number pad! Can't wait :)Thanks for your support.
The order form does not have a section for WKL vs WK, do we need to specify that in the notes section?I will add it. Thanks a lot.
Our team decide to delete the Aluminium one. Sorry about that. You can change your choice now.The order form does not have a section for WKL vs WK, do we need to specify that in the notes section?I will add it. Thanks a lot.
Don't forget to add weight option too :) and does Brass vs Aluminium have different pricing?
I'll resubmit my order in a day or so when the form has been updated throughout and make a comment to ignore my first one
Our team decide to delete the Aluminium one. Sorry about that. You can change your choice now.The order form does not have a section for WKL vs WK, do we need to specify that in the notes section?I will add it. Thanks a lot.
Don't forget to add weight option too :) and does Brass vs Aluminium have different pricing?
I'll resubmit my order in a day or so when the form has been updated throughout and make a comment to ignore my first one
Thank you! I submitted a new order with a note to cancel my first one.The order form does not have a section for WKL vs WK, do we need to specify that in the notes section?I will add it. Thanks a lot.
Our team decide to delete the Aluminium one. Sorry about that. You can change your choice now.The order form does not have a section for WKL vs WK, do we need to specify that in the notes section?I will add it. Thanks a lot.
Don't forget to add weight option too :) and does Brass vs Aluminium have different pricing?
pad's logo is aluminium , c225 only barss weight
I'll resubmit my order in a day or so when the form has been updated throughout and make a comment to ignore my first one
Ah okay, so every order will be brass. I see you also put only 'polished brass' in the first post now. Thanks!
Edit: Resubmitted with note to ignore the old one :thumb:
As a reminder to all, CAVEAT EMPTOR (https://geekhack.org/index.php?topic=36773.0)
What is total weight of case+plate+pcb+weight?Case, plate, and weight are about 1.8kg
What is total weight of case+plate+pcb+weight?Case, plate, and weight are about 1.8kg
Sent from my ONEPLUS A3000 using Tapatalk
Also will we need to pay Shipping now, or when they are being shipped?you need to pay it now,thanks
Couple of questions here...
ISO support is for EU ISO too not just US ISO right?
I've seen carbon fiber plate + pcb option, Is this only for an extra pcb? I would like to go with CF instead of aluminium plate but seems it's not an option for the main package... can be CF be offered as an alternative to aluminium without the extra pcb?
Thanks a lot!
Enviado desde mi iPhone utilizando Tapatalk
Couple of questions here...
ISO support is for EU ISO too not just US ISO right?
I've seen carbon fiber plate + pcb option, Is this only for an extra pcb? I would like to go with CF instead of aluminium plate but seems it's not an option for the main package... can be CF be offered as an alternative to aluminium without the extra pcb?
Thanks a lot!
Enviado desde mi iPhone utilizando Tapatalk
I think it is EU ISO, and it is carbon fiber plate+pcb,only this option,thank you
Couple of questions here...
ISO support is for EU ISO too not just US ISO right?
I've seen carbon fiber plate + pcb option, Is this only for an extra pcb? I would like to go with CF instead of aluminium plate but seems it's not an option for the main package... can be CF be offered as an alternative to aluminium without the extra pcb?
Thanks a lot!
Enviado desde mi iPhone utilizando Tapatalk
I think it is EU ISO, and it is carbon fiber plate+pcb,only this option,thank you
Couple of questions here...
ISO support is for EU ISO too not just US ISO right?
I've seen carbon fiber plate + pcb option, Is this only for an extra pcb? I would like to go with CF instead of aluminium plate but seems it's not an option for the main package... can be CF be offered as an alternative to aluminium without the extra pcb?
Thanks a lot!
Enviado desde mi iPhone utilizando Tapatalk
I think it is EU ISO, and it is carbon fiber plate+pcb,only this option,thank you
Couple of questions here...
ISO support is for EU ISO too not just US ISO right?
I've seen carbon fiber plate + pcb option, Is this only for an extra pcb? I would like to go with CF instead of aluminium plate but seems it's not an option for the main package... can be CF be offered as an alternative to aluminium without the extra pcb?
Thanks a lot!
Enviado desde mi iPhone utilizando Tapatalk
I think it is EU ISO, and it is carbon fiber plate+pcb,only this option,thank you
Hi just, I think something went wrong with your answer...
EDIT: sorry, did not see the message... got it, thanks
Couple of questions here...
ISO support is for EU ISO too not just US ISO right?
I've seen carbon fiber plate + pcb option, Is this only for an extra pcb? I would like to go with CF instead of aluminium plate but seems it's not an option for the main package... can be CF be offered as an alternative to aluminium without the extra pcb?
Thanks a lot!
Enviado desde mi iPhone utilizando Tapatalk
I think it is EU ISO, and it is carbon fiber plate+pcb,only this option,thank you
Hi just, I think something went wrong with your answer...
EDIT: sorry, did not see the message... got it, thanks
So, in order to get a board with the CF plate the price goes up to 490$ right? I know I would get an extra pcb but that was not in my plans... this would be a deal breaker for me :(
Couple of questions here...
ISO support is for EU ISO too not just US ISO right?
I've seen carbon fiber plate + pcb option, Is this only for an extra pcb? I would like to go with CF instead of aluminium plate but seems it's not an option for the main package... can be CF be offered as an alternative to aluminium without the extra pcb?
Thanks a lot!
Enviado desde mi iPhone utilizando Tapatalk
I think it is EU ISO, and it is carbon fiber plate+pcb,only this option,thank you
Hey, I noticed that you seem to have a bit of trouble with the forum format of the western world ;) you keep writing your answers inside the quotes so it's hard to actually see your answer, you need to write it below what you are quoting. thanks!Show Image(https://i.imgur.com/uRUmtOH.png)
I was hoping to find an end-game TKL but not this soon after spending $400 on the TGR 910.
Do you have plans to run this GB or the next revision in the future?
Couple of questions here...
ISO support is for EU ISO too not just US ISO right?
I've seen carbon fiber plate + pcb option, Is this only for an extra pcb? I would like to go with CF instead of aluminium plate but seems it's not an option for the main package... can be CF be offered as an alternative to aluminium without the extra pcb?
Thanks a lot!
Enviado desde mi iPhone utilizando Tapatalk
I think it is EU ISO, and it is carbon fiber plate+pcb,only this option,thank you
Hi just, I think something went wrong with your answer...
EDIT: sorry, did not see the message... got it, thanks
So, in order to get a board with the CF plate the price goes up to 490$ right? I know I would get an extra pcb but that was not in my plans... this would be a deal breaker for me :(
sorry about that
Was invoiced earlier, but it says red case not Titanium that I picked (I had google send me a copy of the form I filled out so I can doublecheck)
I'll ignore that invoice and wait for a new one
Couple of questions here...You can leave a note about CF plate to us.
ISO support is for EU ISO too not just US ISO right?
I've seen carbon fiber plate + pcb option, Is this only for an extra pcb? I would like to go with CF instead of aluminium plate but seems it's not an option for the main package... can be CF be offered as an alternative to aluminium without the extra pcb?
Thanks a lot!
Enviado desde mi iPhone utilizando Tapatalk
Nice keyboard+pad combo :thumb:1. No. There's no brass weight for PAD.
- Is the pad also weighted with a brass insert? May we see a pic of its underside?
- I assume the pad's plate material is also aluminum. Will it be the same color as the color picked for the C225 plate?
- Does the "extra PCB + extra carbon plate" option also covers the pad?
- May we see pictures of the USB connector cutout areas of the C225 and pad?
- Which text will be engraved on the little brass "tag" below the main brass insert of the C225?
- Can we request the main brass insert to not feature the piece of text written in French?
- Is this project related to the SA Camping keyset?
Sadly, no SS plate option is offered.
Any pictures of the MAO black?We will update later.
I love that CAMP C225 !!! :thumb:Thanks for your support. We will think about it.
but....
The GB period is too tight..........
I hope you will give us more time...... :'( :'( :-[
You leave a note to us.Couple of questions here...
ISO support is for EU ISO too not just US ISO right?
I've seen carbon fiber plate + pcb option, Is this only for an extra pcb? I would like to go with CF instead of aluminium plate but seems it's not an option for the main package... can be CF be offered as an alternative to aluminium without the extra pcb?
Thanks a lot!
Enviado desde mi iPhone utilizando Tapatalk
I think it is EU ISO, and it is carbon fiber plate+pcb,only this option,thank you
Hi just, I think something went wrong with your answer...
EDIT: sorry, did not see the message... got it, thanks
So, in order to get a board with the CF plate the price goes up to 490$ right? I know I would get an extra pcb but that was not in my plans... this would be a deal breaker for me :(
Sorry about that. We will correct it as soon as we can.Was invoiced earlier, but it says red case not Titanium that I picked (I had google send me a copy of the form I filled out so I can doublecheck)
I'll ignore that invoice and wait for a new one
Same thing happened with me
The order form has no input buttons for the pad's plate color. Will that be the same one as the C225 plate color?!. Yes
Is an extra carbon fiber plate + PCB option offered for the pad too?
Is it possible to select stainless steel for the plate material? I believe the SS plate option was mentioned on the IC thread.Sorry about that. Now we only provide aluminium plate and CF plate.
Hi buddy. Good luck with the GB!Thanks Bro. Awaiting your Round2.
You leave a note to us.Couple of questions here...
ISO support is for EU ISO too not just US ISO right?
I've seen carbon fiber plate + pcb option, Is this only for an extra pcb? I would like to go with CF instead of aluminium plate but seems it's not an option for the main package... can be CF be offered as an alternative to aluminium without the extra pcb?
Thanks a lot!
Enviado desde mi iPhone utilizando Tapatalk
I think it is EU ISO, and it is carbon fiber plate+pcb,only this option,thank you
Hi just, I think something went wrong with your answer...
EDIT: sorry, did not see the message... got it, thanks
So, in order to get a board with the CF plate the price goes up to 490$ right? I know I would get an extra pcb but that was not in my plans... this would be a deal breaker for me :(
Sorry about that. We will correct it as soon as we can.Was invoiced earlier, but it says red case not Titanium that I picked (I had google send me a copy of the form I filled out so I can doublecheck)
I'll ignore that invoice and wait for a new one
Same thing happened with me
Sorry about that. We will correct it as soon as we can.Was invoiced earlier, but it says red case not Titanium that I picked (I had google send me a copy of the form I filled out so I can doublecheck)
I'll ignore that invoice and wait for a new one
Same thing happened with me
New invoice received and paid, thanks :thumb:
Lets hope for a smooth GB!
LEDs facing North or South?
Also received, and paid.Thank you~ :thumb:
This board looks great!
The order form has no input buttons for the pad's plate color. Will that be the same one as the C225 plate color?!. Yes
Is an extra carbon fiber plate + PCB option offered for the pad too?
2. No
Thanks for your support.
Feel like the buy will be mostly titanium hahaha
Sent from my SM-G935V using Tapatalk
Feel like the buy will be mostly titanium hahaha
Sent from my SM-G935V using Tapatalk
I did too, I really like how it looks.Feel like the buy will be mostly titanium hahaha
Sent from my SM-G935V using Tapatalk
I went with the blue-grey :thumb:
Feel like the buy will be mostly titanium hahaha
oh?
thanks for advise me!
so can i ask you have reason why ??
Feel like the buy will be mostly titanium hahaha
oh?
thanks for advise me!
so can i ask you have reason why ??
I wasn't advising on the MAO black, was just commenting in general.
But.....the reason why....
Because it's ridiculously good looking. All of the other colors are very nice but none beat the titanium by a long shot IMO, closest other color is the blue grey.
(Attachment Link)
I mean just look at it, brings tears to my eye :'( :'(
Was invoiced earlier, but it says red case not Titanium that I picked (I had google send me a copy of the form I filled out so I can doublecheck)
I'll ignore that invoice and wait for a new one
Same thing happened with me
If you want eu iso, u need add a CF plate and leave a note to us.You leave a note to us.Couple of questions here...
ISO support is for EU ISO too not just US ISO right?
I've seen carbon fiber plate + pcb option, Is this only for an extra pcb? I would like to go with CF instead of aluminium plate but seems it's not an option for the main package... can be CF be offered as an alternative to aluminium without the extra pcb?
Thanks a lot!
Enviado desde mi iPhone utilizando Tapatalk
I think it is EU ISO, and it is carbon fiber plate+pcb,only this option,thank you
Hi just, I think something went wrong with your answer...
EDIT: sorry, did not see the message... got it, thanks
So, in order to get a board with the CF plate the price goes up to 490$ right? I know I would get an extra pcb but that was not in my plans... this would be a deal breaker for me :(
That's great! Can you confirm on the ISO thing? Will the pcb and plate allow the 1.25u left shift + 1u keys? Apart from the ISO enter. Thanks!
Enviado desde mi iPhone utilizando Tapatalk
UpdateShow Image(https://i.imgur.com/MsNJbn1.jpg)Show Image(https://i.imgur.com/RKp7cxV.jpg)Show Image(https://i.imgur.com/SKEue5u.jpg)
UpdateShow Image(https://i.imgur.com/MsNJbn1.jpg)Show Image(https://i.imgur.com/RKp7cxV.jpg)Show Image(https://i.imgur.com/SKEue5u.jpg)
If you want eu iso, u need add a CF plate and leave a note to us.You leave a note to us.Couple of questions here...
ISO support is for EU ISO too not just US ISO right?
I've seen carbon fiber plate + pcb option, Is this only for an extra pcb? I would like to go with CF instead of aluminium plate but seems it's not an option for the main package... can be CF be offered as an alternative to aluminium without the extra pcb?
Thanks a lot!
Enviado desde mi iPhone utilizando Tapatalk
I think it is EU ISO, and it is carbon fiber plate+pcb,only this option,thank you
Hi just, I think something went wrong with your answer...
EDIT: sorry, did not see the message... got it, thanks
So, in order to get a board with the CF plate the price goes up to 490$ right? I know I would get an extra pcb but that was not in my plans... this would be a deal breaker for me :(
That's great! Can you confirm on the ISO thing? Will the pcb and plate allow the 1.25u left shift + 1u keys? Apart from the ISO enter. Thanks!
Enviado desde mi iPhone utilizando Tapatalk
UpdateShow Image(https://i.imgur.com/MsNJbn1.jpg)Show Image(https://i.imgur.com/RKp7cxV.jpg)Show Image(https://i.imgur.com/SKEue5u.jpg)
Could we also get a shot of the pad next to the main keyboard? Would be nice to see them side by side...yes,you can
Could we also get a shot of the pad next to the main keyboard? Would be nice to see them side by side...I think you made a mistake,you wrote CA on country
Resubmitted my form. Also need EU ISO support and stated it in the notes.Ok, I got it.
Does this board support split backspace?
Does this board support split backspace?
Neither plate shown in the OP do, so I doubt it. Looks like you can only alter the bottom row, caps lock, and right shift.
Does this board support split backspace?No.
Hey SuperVan / just, I filled up the form on the 19th, when should I get my invoice?Don't worry about that. You will get your invoice soon.
Thanks!
Enviado desde mi iPhone utilizando Tapatalk
Hey SuperVan / just, I filled up the form on the 19th, when should I get my invoice?Don't worry about that. You will get your invoice soon.
Thanks!
Enviado desde mi iPhone utilizando Tapatalk
Hey SuperVan / just, I filled up the form on the 19th, when should I get my invoice?Don't worry about that. You will get your invoice soon.
Thanks!
Enviado desde mi iPhone utilizando Tapatalk
Great, thanks for the info!
Enviado desde mi iPhone utilizando Tapatalk
Is there an MOQ? Also when will the spreadsheet for order status be published? I am also worried about there not being enough interest in this board. I think it looks great and hope it goes through.Any response on why this only weighs 1.8kg? The brass weight looks somewhat thick so not sure if it means the base of the case is not very thick.
I wish it was a little heavier like 2.2kg. There are 60%'s that are heavier like the fjell and x60. How thick is the brass plate? Is 6063 a lighter aluminum than 6061? I'm just wondering why this case is so much lighter than other TKLs.
Hey SuperVan / just, I filled up the form on the 19th, when should I get my invoice?Don't worry about that. You will get your invoice soon.
Thanks!
Enviado desde mi iPhone utilizando Tapatalk
Great, thanks for the info!
Enviado desde mi iPhone utilizando Tapatalk
Got the invoice, it says Titanium+silver+wkl, did you see the note about the CF plate?
Thanks a lot.
Is there an MOQ? Also when will the spreadsheet for order status be published? I am also worried about there not being enough interest in this board. I think it looks great and hope it goes through.Any response on why this only weighs 1.8kg? The brass weight looks somewhat thick so not sure if it means the base of the case is not very thick.
I wish it was a little heavier like 2.2kg. There are 60%'s that are heavier like the fjell and x60. How thick is the brass plate? Is 6063 a lighter aluminum than 6061? I'm just wondering why this case is so much lighter than other TKLs.
Sent from my iPhone using Tapatalk
Is there an MOQ? Also when will the spreadsheet for order status be published? I am also worried about there not being enough interest in this board. I think it looks great and hope it goes through.Any response on why this only weighs 1.8kg? The brass weight looks somewhat thick so not sure if it means the base of the case is not very thick.
I wish it was a little heavier like 2.2kg. There are 60%'s that are heavier like the fjell and x60. How thick is the brass plate? Is 6063 a lighter aluminum than 6061? I'm just wondering why this case is so much lighter than other TKLs.
Sent from my iPhone using Tapatalk
The weight is pretty small; you can see the thickness here:Show Image(https://geekhack.org/index.php?action=dlattach;topic=81377.0;attach=134519;image)
Maybe 3-4mm?
6063 and 6061 are the same density (2.7g/cm3, brass is about 8.5g/cm3).
Which one is the blue gray? The photos are confusing for me. I'm having a hard time choosing color, can we get a more clear picture of the blue gray?
Thank you very much!!Which one is the blue gray? The photos are confusing for me. I'm having a hard time choosing color, can we get a more clear picture of the blue gray?Show Image(https://i.imgur.com/blm4maW.jpg)
Just ordered the blue/gray. Omg gorgeous. Only cherry type switches compatible? Kaihl, cherry, zelios?
Sent from my Nexus 6P using Tapatalk
can you guys upload MAO Black color C225 please? i want to see it what is different to just Black?
also i ask you guys Is the red color of the picture the color of the actual keyboard? same hot red?
I am new to the whole custom keyboard area, so please help a newbie out. I built my first keyboard recently and fried the first PCB, so I was wondering1. You can leave a note. 2. No.
- If extra PCBs are an option without getting a plate
- Will other TKL PCBs fit in the case? If yes, which ones?
Thanks for your help, this Blue-Grey option looks so nice I am going to get my first custom.
can you guys upload MAO Black color C225 please? i want to see it what is different to just Black?I will update later.
also i ask you guys Is the red color of the picture the color of the actual keyboard? same hot red?
I am new to the whole custom keyboard area, so please help a newbie out. I built my first keyboard recently and fried the first PCB, so I was wondering1. You can leave a note. 2. No.
- If extra PCBs are an option without getting a plate
- Will other TKL PCBs fit in the case? If yes, which ones?
Thanks for your help, this Blue-Grey option looks so nice I am going to get my first custom.
Thanks for your support.I am new to the whole custom keyboard area, so please help a newbie out. I built my first keyboard recently and fried the first PCB, so I was wondering1. You can leave a note. 2. No.
- If extra PCBs are an option without getting a plate
- Will other TKL PCBs fit in the case? If yes, which ones?
Thanks for your help, this Blue-Grey option looks so nice I am going to get my first custom.
Thanks! Submitted my response and Camp is going to be my first custom!
Would the Camp Pad support splitting the 2u keys, like 0 and +? I'd rather have all 1u keys.
Sent from my Pixel using Tapatalk
Would the Camp Pad support splitting the 2u keys, like 0 and +? I'd rather have all 1u keys.
Sent from my Pixel using Tapatalk
if you look at the picture, you can see that it supports that setup
Would the Camp Pad support splitting the 2u keys, like 0 and +? I'd rather have all 1u keys.
Sent from my Pixel using Tapatalk
if you look at the picture, you can see that it supports that setup
Sorry, I'm still new and not really experienced enough to easily tell from looking at the PCB :/
Would the Camp Pad support splitting the 2u keys, like 0 and +? I'd rather have all 1u keys.
Sent from my Pixel using Tapatalk
if you look at the picture, you can see that it supports that setup
Sorry, I'm still new and not really experienced enough to easily tell from looking at the PCB :/
no worries, we all start somewhere
you can tell because there are 3 centered holes in the PCB under the longer plate holes
if there was only 1, then it would not support all 1u
and the plate is the right shape for it as well, but that's a more complicated issue
Would the Camp Pad support splitting the 2u keys, like 0 and +? I'd rather have all 1u keys.
Sent from my Pixel using Tapatalk
if you look at the picture, you can see that it supports that setup
Sorry, I'm still new and not really experienced enough to easily tell from looking at the PCB :/
no worries, we all start somewhere
you can tell because there are 3 centered holes in the PCB under the longer plate holes
if there was only 1, then it would not support all 1u
and the plate is the right shape for it as well, but that's a more complicated issue
Thanks very much - I thought the plate looked right, but wasn't sure about the PCB. Now I know :B
Im in and paid. the low post count by OP is a bit alarming......
this is legit right? LOL
Im in and paid. the low post count by OP is a bit alarming......
this is legit right? LOL
it's already run twice in china, to good reception
That's what I thought. Just making sure. Thanks all. Super excited. First real custom.Im in and paid. the low post count by OP is a bit alarming......
this is legit right? LOL
it's already run twice in china, to good reception
What is the weight of the C225?
Any pictures of the MAO black?We will update later.
Any pictures of the MAO black?We will update later.
please upload MAO Black pictures!!! i want to see and decide color!!
Any pictures of the MAO black?We will update later.
please upload MAO Black pictures!!! i want to see and decide color!!
Dude, it's just gonna be a flat black
I ordered one two days ago, but haven't received the invoice yet. Please send it to me.Yea same here. Gonna be sad if I don't see one before the groupbuy ends.
Is there a way to change the color after we order? I'm not sure what color I want to get, but I want to join before the groupbuy ends. If you could show some pictures of MAO black and white this would help out a lot :)Don't worry,we will give you new pictures later
I ordered one two days ago, but haven't received the invoice yet. Please send it to me.I send it to you on 23rd September ,but I don't know why it cancelled
I ordered one two days ago, but haven't received the invoice yet. Please send it to me.I send it to you on 23rd September ,but I don't know why it cancelled
I filled out a form twice for a black case and received an invoice for titanium both times. Am I missing something?
Can I pay for titanium then change my color to black?
I am in the same boat, no invoice yet. But I submitted my form just last week though.
I filled out a form twice for a black case and received an invoice for titanium both times. Am I missing something?I can't find your ID ,can you pm your name?
Can I pay for titanium then change my color to black?
Got my order in, can't wait! The blue gray looks amazing!Agreed. That's what I ordered. What switches you putting in yours!? I'm going to put the Yuri caps from massdrop on mine. Wooot
Got my order in, can't wait! The blue gray looks amazing!Agreed. That's what I ordered. What switches you putting in yours!? I'm going to put the Yuri caps from massdrop on mine. Wooot
Sent from my Nexus 6P using Tapatalk
NiceGot my order in, can't wait! The blue gray looks amazing!Agreed. That's what I ordered. What switches you putting in yours!? I'm going to put the Yuri caps from massdrop on mine. Wooot
Sent from my Nexus 6P using Tapatalk
I'm probably going to end up using 68g vintage blacks, but that might change as the ship date gets closer. I haven't decided on which caps I'm going to use on it either, but that's easy to pick later on.
i'm on the boat today. so Should be invoice come?sorry,I can't open doc.google today
if so, can pay before oct 07. right? ;D
i'm on the boat today. so Should be invoice come?sorry,I can't open doc.google today
if so, can pay before oct 07. right? ;D
i'm on the boat today. so Should be invoice come?sorry,I can't open doc.google today
if so, can pay before oct 07. right? ;D
i do have copy in my mail box. but invoice is still not come yet. so... I should resubmit or anything?
I also submitted a form yesterday but have not received an invoicesorry, please wait ,I can't open doc.google
Sent from my iPhone using Tapatalk
i'm on the boat today. so Should be invoice come?sorry,I can't open doc.google today
if so, can pay before oct 07. right? ;D
i do have copy in my mail box. but invoice is still not come yet. so... I should resubmit or anything?
It hears like a Chinese GFW issue...
I know the GB closes today and hopefully anyone who has entered a form before this is guaranteed a spot?
I know the GB closes today and hopefully anyone who has entered a form before this is guaranteed a spot?
i got copy of submit in my mailbox. that is not guaranteed?
Feel so sorry for you guys. In the past days, I have to take care of my wife's father. Because of his cerebral thrombosis. Now our team decide to extended end time to 7th October 2017. Thanks for the supports.
Feel so sorry for you guys. In the past days, I have to take care of my wife's father. Because of his cerebral thrombosis. Now our team decide to extended end time to 7th October 2017. Thanks for the supports.
sorry about what happens to your wife father....
so.... we have to do resubmit or something?
Thanks, Bro.Feel so sorry for you guys. In the past days, I have to take care of my wife's father. Because of his cerebral thrombosis. Now our team decide to extended end time to 7th October 2017. Thanks for the supports.
sorry about what happens to your wife father....
so.... we have to do resubmit or something?
No, shouldn't have to resubmit. They're just extending the order period until after the holiday.
SuperVan, I wish the best to you and your family.
Feel so sorry for you guys. In the past days, I have to take care of my wife's father. Because of his cerebral thrombosis. Now our team decide to extended end time to 7th October 2017. Thanks for the supports.Be strong and put family first!
Do people usually go with WKL or WK option? Does WKL make it more rare or what?
Anyone know if the WKL is 7u? I know typically they are, however I don't want to chance it. Thanks in advanceWKL is 7u
Looks so...crossing fingers
btw hope everything is going alright with the emergency
Nice I went with white(mao) and red plate. The only linear switches I've tried are cherry silvers on my core. I like them, but missed the bump/click from my noob entry keeb. Zealios are wonderful. Hopefully I'm not missing any compatibility issues, but I want to use 75g tactile oetemu switches.
I got a Blue-Grey or at least I hope I got it while I wait for the invoice. Blue-grey TKL with a red plate. Planning to build it with some Zealios or Gat Yellows(mainly because I oddly like that switch so much)i went with blue-grey with a silver plate. TKL. i think i'll build my first zealios or get the Kailh Box switches. We will see. Leaning towards zealios....
I got a Blue-Grey or at least I hope I got it while I wait for the invoice. Blue-grey TKL with a red plate. Planning to build it with some Zealios or Gat Yellows(mainly because I oddly like that switch so much)i went with blue-grey with a silver plate. TKL. i think i'll build my first zealios or get the Kailh Box switches. We will see. Leaning towards zealios....
such a shame that Topre's aren't plug and play like other switches.....I got a Blue-Grey or at least I hope I got it while I wait for the invoice. Blue-grey TKL with a red plate. Planning to build it with some Zealios or Gat Yellows(mainly because I oddly like that switch so much)i went with blue-grey with a silver plate. TKL. i think i'll build my first zealios or get the Kailh Box switches. We will see. Leaning towards zealios....
Just realized that Zeal has the tealios right now on GB too, I wonder how good they are since I prefer Linears over Tactiles....
I got a Blue-Grey or at least I hope I got it while I wait for the invoice. Blue-grey TKL with a red plate. Planning to build it with some Zealios or Gat Yellows(mainly because I oddly like that switch so much)i went with blue-grey with a silver plate. TKL. i think i'll build my first zealios or get the Kailh Box switches. We will see. Leaning towards zealios....
Just realized that Zeal has the tealios right now on GB too, I wonder how good they are since I prefer Linears over Tactiles....
I got a Blue-Grey or at least I hope I got it while I wait for the invoice. Blue-grey TKL with a red plate. Planning to build it with some Zealios or Gat Yellows(mainly because I oddly like that switch so much)i went with blue-grey with a silver plate. TKL. i think i'll build my first zealios or get the Kailh Box switches. We will see. Leaning towards zealios....
Just realized that Zeal has the tealios right now on GB too, I wonder how good they are since I prefer Linears over Tactiles....
vintage blacks > all
such a shame that Topre's aren't plug and play like other switches.....I got a Blue-Grey or at least I hope I got it while I wait for the invoice. Blue-grey TKL with a red plate. Planning to build it with some Zealios or Gat Yellows(mainly because I oddly like that switch so much)i went with blue-grey with a silver plate. TKL. i think i'll build my first zealios or get the Kailh Box switches. We will see. Leaning towards zealios....
Just realized that Zeal has the tealios right now on GB too, I wonder how good they are since I prefer Linears over Tactiles....
Are they still a thing with the I:C Massdrop legal bull**** happening....?such a shame that Topre's aren't plug and play like other switches.....I got a Blue-Grey or at least I hope I got it while I wait for the invoice. Blue-grey TKL with a red plate. Planning to build it with some Zealios or Gat Yellows(mainly because I oddly like that switch so much)i went with blue-grey with a silver plate. TKL. i think i'll build my first zealios or get the Kailh Box switches. We will see. Leaning towards zealios....
Just realized that Zeal has the tealios right now on GB too, I wonder how good they are since I prefer Linears over Tactiles....
Aren't the new Halo switches from IC supposed to be the closest to Topre? If yes, then maybe I can harvest them from the KType for this.
Are they still a thing with the I:C Massdrop legal bull**** happening....?such a shame that Topre's aren't plug and play like other switches.....I got a Blue-Grey or at least I hope I got it while I wait for the invoice. Blue-grey TKL with a red plate. Planning to build it with some Zealios or Gat Yellows(mainly because I oddly like that switch so much)i went with blue-grey with a silver plate. TKL. i think i'll build my first zealios or get the Kailh Box switches. We will see. Leaning towards zealios....
Just realized that Zeal has the tealios right now on GB too, I wonder how good they are since I prefer Linears over Tactiles....
Aren't the new Halo switches from IC supposed to be the closest to Topre? If yes, then maybe I can harvest them from the KType for this.
Sent from my Nexus 6P using Tapatalk
I read that this will support ISO EU layout (with LShift 1.25U + 1U), but it seems to require an addition of CF plate for this to be possible, is that correct?
Will that add an extra cost or will the alu plate be swapped for this? (I wouldn't need an extra PCB)
In case of using a CF plate, how will that impact the total weight or looks?
What's the difference between Black and MAO Black
have these shipped yet? ;)
not sure if you picked up on my NOT seriousness.....have these shipped yet? ;)
Considering the payment deadline isn't over yet... No.
not sure if you picked up on my NOT seriousness.....have these shipped yet? ;)
Considering the payment deadline isn't over yet... No.
not sure if you picked up on my NOT seriousness.....have these shipped yet? ;)
Considering the payment deadline isn't over yet... No.
Come on buddy, some of us haven't got our invoices yet :D
he tried to make a joke but clearly it hasn't worked out
either way i'm still flip flopping on whether i should get in on this or not
not sure if you picked up on my NOT seriousness.....have these shipped yet? ;)
Considering the payment deadline isn't over yet... No.
Come on buddy, some of us haven't got our invoices yet :D
he tried to make a joke but clearly it hasn't worked out
either way i'm still flip flopping on whether i should get in on this or not
I read that this will support ISO EU layout (with LShift 1.25U + 1U), but it seems to require an addition of CF plate for this to be possible, is that correct?
the CF plate supports it but it looks like the PCB might not. it didn't in the china GB, so unless they're changing it for this one, i don't think it will. see if the runners comment on this at allQuoteWill that add an extra cost or will the alu plate be swapped for this? (I wouldn't need an extra PCB)
CF plate adds an extra cost, yeah, you can only get an extra plate/pcb. it makes it easier for them to support itQuoteIn case of using a CF plate, how will that impact the total weight or looks?
it will make the board even lighter than it already is. i think this is the lightest alu TKL i've seen in a whileQuoteWhat's the difference between Black and MAO Black
Black is anodized black, MAO black is Microarc Oxodized black. MAO finishes are traditionally VERY fragile, I'd recommend staying away.
Hope this helps.
really curious on how people think about this vs the LZ-LCS
Any reason why more experienced members like you are on the fence? Outside of just personal preference, of course.
Is this Korean board?
really curious on how people think about this vs the LZ-LCSthere are better options coming soon for the price, no 1 is coming mid november, and that's the board that has people really hyped
not that this board is bad, it's just not as good as some of the other options that are coming
really curious on how people think about this vs the LZ-LCSthere are better options coming soon for the price, no 1 is coming mid november, and that's the board that has people really hyped
not that this board is bad, it's just not as good as some of the other options that are coming
Is there a IC for this board?
no 1 is coming mid november, and that's the board that has people really hyped
Any insight to how many participants we have? :) maybe a spreadsheet or so like other buys have
Any insight to how many participants we have? :) maybe a spreadsheet or so like other buys haveSorry,SuperVan 's father-in-law is very sick,so we will go on this after a while,thank you
really curious on how people think about this vs the LZ-LCSthere are better options coming soon for the price, no 1 is coming mid november, and that's the board that has people really hyped
not that this board is bad, it's just not as good as some of the other options that are coming
Is there a IC for this board?
https://geekhack.org/index.php?topic=90110.0
2 weeks ago was latest correspondence....
Sent from my Nexus 6P using Tapatalk
I don't know what's going on, but I'm not letting this trudge on as long as E8 did. I hope someone from CAMP can update us soon.
I don't know what's going on, but I'm not letting this trudge on as long as E8 did. I hope someone from CAMP can update us soon.
What happened with that one?
I just got an email confirming my order and also said that the product was in production. Anyone else get a similar email?
Sent from my Pixel 2 XL using Tapatalk
I just got an email confirming my order and also said that the product was in production. Anyone else get a similar email?
Sent from my Pixel 2 XL using Tapatalk
Yup, same here. Got two actually stating the same. I'm curious though, is Eric (sender of the mail) SuperVan or just?
Any updates? Just curious. This is a lot of money.....
Anyone else slightly nervous?
Sent from my Nexus 6P using Tapatalk
I replied to the order confirmation E-Mail from last month to request an address change but haven't received a reply yet. Any update on this matter? Thanks!
Any updates? Just curious. This is a lot of money.....
Anyone else slightly nervous?
Sent from my Nexus 6P using Tapatalk
Thank you very much for the update! This is very assuring. As Puddsy said, this appears to be a cultural difference, over here we like to hear updates every other week on long projects, even if it's just a 'still working on it' :pSorry,I still can't get your email,but I saw your pm,I have changed your adress.Don't worry
I also sent out a new E-Mail to the one you wrote, and also replied to your private message here. Thank you!
Thank you very much for the update! This is very assuring. As Puddsy said, this appears to be a cultural difference, over here we like to hear updates every other week on long projects, even if it's just a 'still working on it' :pI‘m sorry about the update,we usually use the QQ group to contact. all the buyers are in the QQ group and can communicate at any time.This is our first time to do group-buying on GH,so we will update the message more frequently,my English is poor,so please fogive me . Thank you~
I also sent out a new E-Mail to the one you wrote, and also replied to your private message here. Thank you!
Thank you very much for the update! This is very assuring. As Puddsy said, this appears to be a cultural difference, over here we like to hear updates every other week on long projects, even if it's just a 'still working on it' :pI‘m sorry about the update,we usually use the QQ group to contact. all the buyers are in the QQ group and can communicate at any time.This is our first time to do group-buying on GH,so we will update the message more frequently,my English is poor,so please fogive me . Thank you~
I also sent out a new E-Mail to the one you wrote, and also replied to your private message here. Thank you!
Thanks a lot. I was just a bit nervous not hearing any updates. So glad to hear from you. Thanks a million. Very excited for this!! When do you think they'll ship? I know it'll be a while yet. Just curious. Woooooot!Any updates? Just curious. This is a lot of money.....
Anyone else slightly nervous?
Sent from my Nexus 6P using Tapatalk
Don't be nervous, we're not cheaters
The pad is ready,wait for c225.
white(mao)'pictrueShow Image(https://s1.ax1x.com/2017/12/28/xXb8I.md.jpg)
white(mao)'pictrueShow Image(https://s1.ax1x.com/2017/12/28/xXb8I.md.jpg)
white(mao)'pictrueShow Image(https://s1.ax1x.com/2017/12/28/xXb8I.md.jpg)
Thanks for your update.
Is it possible to complete the shipping by March?
new photoShow Image(https://s1.ax1x.com/2017/12/29/zJBUf.md.jpg)
also everyone, what are the specs of the PCB?
what would be compatible with this GB from the link below.
https://zealpc.net/collections/switches/products/zealstabilizers
looking at zealios stuff and Kailh stuff.......
Do i even need stabilizers?
any help appreciated. thanks
What size spacebar?also everyone, what are the specs of the PCB?
what would be compatible with this GB from the link below.
https://zealpc.net/collections/switches/products/zealstabilizers
looking at zealios stuff and Kailh stuff.......
Do i even need stabilizers?
any help appreciated. thanks
you need stabs
those will work but they're a bit expensive, you can just use genuine cherry stabs and it'll be fine
What size spacebar?also everyone, what are the specs of the PCB?
what would be compatible with this GB from the link below.
https://zealpc.net/collections/switches/products/zealstabilizers
looking at zealios stuff and Kailh stuff.......
Do i even need stabilizers?
any help appreciated. thanks
you need stabs
those will work but they're a bit expensive, you can just use genuine cherry stabs and it'll be fine
Sent from my Nexus 6P using Tapatalk
Are we close to shipping?
An update would be amazing! Thanks all!
On a side note. I just need switches and stabilizers for this to be fully functional, correct?
Sent from my Nexus 6P using Tapatalk
Show Image(https://s1.ax1x.com/2018/02/03/9Z7EiF.md.jpg)
What switches you putting in this board guys? Halo? Zealios? Kailh? Cherry?
Sent from my Nexus 6P using Tapatalk
Mod M how are those? They intrigue meWhat switches you putting in this board guys? Halo? Zealios? Kailh? Cherry?
Sent from my Nexus 6P using Tapatalk
my personal recommendation is mod M tactiles
been liking them recently
or gat yellows, those are good too
Mod M how are those? They intrigue meWhat switches you putting in this board guys? Halo? Zealios? Kailh? Cherry?
Sent from my Nexus 6P using Tapatalk
my personal recommendation is mod M tactiles
been liking them recently
or gat yellows, those are good too
Sent from my Nexus 6P using Tapatalk
Gotta go with vintage blacks :)I've been struggling to find some lately :/. The main guy I used to get them from is out of the game
Sent from my ONEPLUS A5010 using Tapatalk
Mod M how are those? They intrigue meWhat switches you putting in this board guys? Halo? Zealios? Kailh? Cherry?
Sent from my Nexus 6P using Tapatalk
my personal recommendation is mod M tactiles
been liking them recently
or gat yellows, those are good too
Sent from my Nexus 6P using Tapatalk
they're probably the most underrated stock switch due to the first round being not so good
i got some for my weaven and they're super nice
Mod M how are those? They intrigue meWhat switches you putting in this board guys? Halo? Zealios? Kailh? Cherry?
Sent from my Nexus 6P using Tapatalk
my personal recommendation is mod M tactiles
been liking them recently
or gat yellows, those are good too
Sent from my Nexus 6P using Tapatalk
they're probably the most underrated stock switch due to the first round being not so good
i got some for my weaven and they're super nice
have the first round mod-m's, still my favorite tactile switch, what'd they improve on in further rounds?
Mod M how are those? They intrigue meWhat switches you putting in this board guys? Halo? Zealios? Kailh? Cherry?
Sent from my Nexus 6P using Tapatalk
my personal recommendation is mod M tactiles
been liking them recently
or gat yellows, those are good too
Sent from my Nexus 6P using Tapatalk
they're probably the most underrated stock switch due to the first round being not so good
i got some for my weaven and they're super nice
have the first round mod-m's, still my favorite tactile switch, what'd they improve on in further rounds?
smoother and the stems are harder since there were some issues in shipping
smoother and the stems are harder since there were some issues in shipping
smoother and the stems are harder since there were some issues in shipping
Did they fix the spacing on the bottom housing clips that made it difficult to clip into the plate on install? My R1s are the perfect switch with some lube imo but my hands hurt like **** every time I build with them.
Start deliveryOmg! Wooot!
Start delivery
Start delivery
Great news! I assume we will receive tracking via E-Mail soon then? What shipping service is used? DHL? Please be DHL :D
All the keyboards have been sent out. Please check the email.Thank you!
I got the message that my parcel had already been at the domestic airport.
Super fast!
I got the message that my parcel has already been at the domestic airport.
Super fast!
The package arrived in London and was handled there. Just got a call from DPD, she needed my E-Mail address. I then got an E-Mail containing more info, the value was declared at 50$ so I had to pay 10.02£ VAT and 10£ processing fee. Paid immediatly via PayPal and I assume it will now continue it's journey to my doorstep. So far so good!Wow that was fast. Hope you get it quickly.
The package arrived in London and was handled there. Just got a call from DPD, she needed my E-Mail address. I then got an E-Mail containing more info, the value was declared at 50$ so I had to pay 10.02£ VAT and 10£ processing fee. Paid immediatly via PayPal and I assume it will now continue it's journey to my doorstep. So far so good!Wow that was fast. Hope you get it quickly.
My case's journey to Texas is taking a bit longer.
So on my TKL, i can use either a 6.25 or 7u stabilizer?
This PCB is compatible with both?
Is there a PCB info/specs post i am not seeing somewhere?
Thanks!
Mine just arrived - can't wait to build it next week!
Mine just arrived - can't wait to build it next week!
Any pictures?
Incoming kitchen counter shots.Daddy likey. Thanks !Show Image(https://uploads.tapatalk-cdn.com/20180214/804021bff9c992ac35ec8407b1899b63.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180214/01eb9f22c4b29f463680c04180679a86.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180214/dce227947a32ee58bfb98d629f068aab.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180214/3bc22d8d7c8f1abfa710880029b6adaa.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180214/9cb5570f5ae8afe4e041600a0291c03a.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180214/3be3748ec7daa48a0294c216fa797ccd.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180214/f4e35a857a280e05cb41fa0a12d1cbeb.jpg)
Sent from my iPhone using Tapatalk
Incoming kitchen counter shots.Show Image(https://uploads.tapatalk-cdn.com/20180214/804021bff9c992ac35ec8407b1899b63.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180214/01eb9f22c4b29f463680c04180679a86.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180214/dce227947a32ee58bfb98d629f068aab.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180214/3bc22d8d7c8f1abfa710880029b6adaa.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180214/9cb5570f5ae8afe4e041600a0291c03a.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180214/3be3748ec7daa48a0294c216fa797ccd.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180214/f4e35a857a280e05cb41fa0a12d1cbeb.jpg)
Sent from my iPhone using Tapatalk
I also have some issues. There are some scratches on the brass weight and bottom,Post some pics! These flaws are really dissapointing :(
and worst of all, I have some flaws, such as discoloration and strains, regarding anodizing.
I'm planning to polish brass weight, I'll post the results next week whenever I get the chance!Thatd be awesome. How difficult is it to polish the brass?
Sent from my iPhone using Tapatalk
Never done it before but it looks straight forward - sand it with 1200 then 2000 grit sandpaper, buff it with a polish compound, then apply a few layers of lacquer.I'm planning to polish brass weight, I'll post the results next week whenever I get the chance!Thatd be awesome. How difficult is it to polish the brass?
Sent from my iPhone using Tapatalk
Sent from my ONEPLUS A5010 using Tapatalk
board just arrived, not 100% pleased with the quality I must say, especially for a 400$ kitThanks for the honest write up. I'll be building mine this week. Supposed to arrive today. Hope to hear more from you soon.
screw holes are full of white stuff, needs some cleaning, no big deal thoughShow Image(https://i.imgur.com/tJDvXyJ.jpg)
bottom logo didn't properly cut outShow Image(https://i.imgur.com/z95Ruwu.jpg)
main offender: dark spots inside the front logo, I assume it wasn't properly dried when taking out of the anodization bath and residual droplets in the corners dried out over time, leaving these marksShow Image(https://i.imgur.com/XubbgmE.jpg)
plus side, Titanium Gray color is spot on, finish is smooth.
testing PCB now
will build it tonight or tomorrow depending on when the box whites I ordered come in.
Hey all,
For my stabilizers do i want:
PCB Screw in
PCB Snap in
Plate Mount
What is supported on this Board/PCB/Plate?
Thanks in advance!
Cool, thanks.Hey all,
For my stabilizers do i want:
PCB Screw in
PCB Snap in
Plate Mount
What is supported on this Board/PCB/Plate?
Thanks in advance!
either PCB mount option
Slight issues with mine too. Really excited to build this though. No QC? Love this case. Small defects.... Thoughts?Show Image(https://uploads.tapatalk-cdn.com/20180220/ec3786daca4397e273138f644f3840d5.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180220/6a3d9c5154a67688e8aa6a4d25e4ee7d.jpg)
Sent from my Nexus 6P using Tapatalk
Don't get me wrong, I love it. But like pudsy said. For $400.00 you expect a bit better. That's all. $400 is a lot to me.Slight issues with mine too. Really excited to build this though. No QC? Love this case. Small defects.... Thoughts?Show Image(https://uploads.tapatalk-cdn.com/20180220/ec3786daca4397e273138f644f3840d5.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180220/6a3d9c5154a67688e8aa6a4d25e4ee7d.jpg)
Sent from my Nexus 6P using Tapatalk
It looks so nice! The color is amazing. Maybe if it bothered you too much you can try to inlay it with epoxy or something?
Don't get me wrong, I love it. But like pudsy said. For $400.00 you expect a bit better. That's all. $400 is a lot to me.Slight issues with mine too. Really excited to build this though. No QC? Love this case. Small defects.... Thoughts?Show Image(https://uploads.tapatalk-cdn.com/20180220/ec3786daca4397e273138f644f3840d5.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180220/6a3d9c5154a67688e8aa6a4d25e4ee7d.jpg)
Sent from my Nexus 6P using Tapatalk
It looks so nice! The color is amazing. Maybe if it bothered you too much you can try to inlay it with epoxy or something?
Sent from my Nexus 6P using Tapatalk
Sorry it wasn't you! It was OblDon't get me wrong, I love it. But like pudsy said. For $400.00 you expect a bit better. That's all. $400 is a lot to me.Slight issues with mine too. Really excited to build this though. No QC? Love this case. Small defects.... Thoughts?Show Image(https://uploads.tapatalk-cdn.com/20180220/ec3786daca4397e273138f644f3840d5.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180220/6a3d9c5154a67688e8aa6a4d25e4ee7d.jpg)
Sent from my Nexus 6P using Tapatalk
It looks so nice! The color is amazing. Maybe if it bothered you too much you can try to inlay it with epoxy or something?
Sent from my Nexus 6P using Tapatalk
i feel like i haven't said that re: this board
and personally i'd just inlay it if i got an engraving like that
i'm thinking about doing my mira's logo with a dark blue since there's an anodizing shadow in it
Here's a link to album of quite a few photos of the C225 and Camp PAD that I got today. Mine also suffers from similar issues,
but it looks like this weight is in okay shape. It's a very cool keyboard. I wish the top of the case had a brass backing like the logo on the PAD. This did turn out more blue-green than I had hoped,
so I don't know if I'll hang onto it. https://imgur.com/gallery/TCiJM (https://imgur.com/gallery/TCiJM)
Here's a shot of the weight post-polish. I could probably do better but I rushed it a little.Show Image(https://uploads.tapatalk-cdn.com/20180223/ff65acbb59f3f85dda4965c0165352ed.jpg)
Sent from my iPhone using Tapatalk
I do love this board. Kailh bronze switches, GMK Yuri caps. My wife typing on it:Show Image(https://uploads.tapatalk-cdn.com/20180226/167314e8cb93f14839212f75886256db.jpg)
Sent from my Nexus 6P using Tapatalk
If youre interested im selling mineI do love this board. Kailh bronze switches, GMK Yuri caps. My wife typing on it:Show Image(https://uploads.tapatalk-cdn.com/20180226/167314e8cb93f14839212f75886256db.jpg)
Sent from my Nexus 6P using Tapatalk
That's a great color. Wish I had gotten in on this just for that.
If youre interested im selling mineI do love this board. Kailh bronze switches, GMK Yuri caps. My wife typing on it:Show Image(https://uploads.tapatalk-cdn.com/20180226/167314e8cb93f14839212f75886256db.jpg)
Sent from my Nexus 6P using Tapatalk
That's a great color. Wish I had gotten in on this just for that.
Sent from my ONEPLUS A5010 using Tapatalk
Wow that teal is nice. I got mine all built up yesterday, I'm going to take some glamour shots and capless shots tomorrow, but here are few pics I snapped today.Show Image(https://i.imgur.com/KGS6WPi.jpg)Show Image(https://i.imgur.com/zNdoYfF.jpg)
Wow that teal is nice. I got mine all built up yesterday, I'm going to take some glamour shots and capless shots tomorrow, but here are few pics I snapped today.Show Image(https://i.imgur.com/KGS6WPi.jpg)Show Image(https://i.imgur.com/zNdoYfF.jpg)
Wow that teal is nice. I got mine all built up yesterday, I'm going to take some glamour shots and capless shots tomorrow, but here are few pics I snapped today.Show Image(https://i.imgur.com/KGS6WPi.jpg)Show Image(https://i.imgur.com/zNdoYfF.jpg)
Did they dyesub the Tab legend upside down? :confused:
Wow that teal is nice. I got mine all built up yesterday, I'm going to take some glamour shots and capless shots tomorrow, but here are few pics I snapped today.Show Image(https://i.imgur.com/KGS6WPi.jpg)Show Image(https://i.imgur.com/zNdoYfF.jpg)
Did they dyesub the Tab legend upside down? :confused:
Yep :p still waiting on a replacement.
Wow that teal is nice. I got mine all built up yesterday, I'm going to take some glamour shots and capless shots tomorrow, but here are few pics I snapped today.Show Image(https://i.imgur.com/KGS6WPi.jpg)Show Image(https://i.imgur.com/zNdoYfF.jpg)
Eric sent me the plate I was missing for the pad and now I have everything built. The keyboard is at work right now, so I have to wait to get some combo pictures, but here is how the pad turned out:Show Image(https://i.imgur.com/keSGAuj.jpg)Show Image(https://i.imgur.com/n8de5h7.jpg)Show Image(https://i.imgur.com/0ORRQXa.jpg)Show Image(https://i.imgur.com/f6V4IF1.jpg)
Good work! How do you feel about Hako True?They're not my usual cup of tea, but I've been enjoying typing on them. I went in without high expectations and so I was not let down by them. Feeling them just alone as a single switch or just with a cap on one switch they feel terrible, but when you actually put them together on a board it's quite enjoyable. For reference I generally like a nice tactile switch on the heavier side, 78g zeal is my go to (I pound tend to pound on the keys), and my favorite is BKE redux heavy. My best description of this switch is a linear switch that gets heavier as it gets toward the bottom. It's interesting. One this I will say is that they get really heavy as they get toward the bottom, I spent almost a full day typing at work last week, and my fingers were feeling a bit fatigued. This probably wouldn't have been as bad if I didn't pound on the keys so hard, they don't get heavy until the bottom, so if I wasn't slamming them it would probably be different. I'm not sure I would build another board with them, but overall I'm happy with how this one turned out. They're definitely not for everyone, but I would definitely recommend trying them out; it's a pretty different typing experience from anything else I've tried.
I dont understand how there is not a single company who would accept unlimited orders with the design like that? Why there is always a limited ordering with any custom aluminium cases???
P.S. Devs of this forum, change this terrible captcha nonsense
P.S. Devs of this forum, change this terrible captcha nonsense
P.S. Devs of this forum, change this terrible captcha nonsense
Captcha will go away after you've made 5 posts. And no, we will not remove our anti-spam measures just because they're mildly inconvenient.
I dont understand how there is not a single company who would accept unlimited orders with the design like that? Why there is always a limited ordering with any custom aluminium cases???
P.S. Devs of this forum, change this terrible captcha nonsense
I dont understand how there is not a single company who would accept unlimited orders with the design like that? Why there is always a limited ordering with any custom aluminium cases???
P.S. Devs of this forum, change this terrible captcha nonsense
I dont understand how there is not a single company who would accept unlimited orders with the design like that? Why there is always a limited ordering with any custom aluminium cases???
P.S. Devs of this forum, change this terrible captcha nonsense
Seems like they sold out almost all of their keyboards as well.. Whats going on here :eek:
I dont understand how there is not a single company who would accept unlimited orders with the design like that? Why there is always a limited ordering with any custom aluminium cases???
P.S. Devs of this forum, change this terrible captcha nonsense
Seems like they sold out almost all of their keyboards as well.. Whats going on here :eek:
That's just kind of the deal with this hobby; most everything is limited supply and if it's not, few people want it generally. Your best bet is to just monitor threads of builds you like; and when the gb opens take your opportunity. You wait a lot in this hobby. You wait for a keyboard you like in IC phase, you wait for the gb to come, then you wait for them to be built, and wait for it to ship. It's just how it is. Like previously mentioned, many of those that run gbs are just hobbyists themselves.
P.S. Devs of this forum, change this terrible captcha nonsense
High end customs not so much. You can get a decent board on several websites they just might not be... what you seek if you're in this thread; I'm not sure if you're looking for an aluminum casing in particular, but you can try 1upkeyboards.com, zfrontier, kbdfans.. There are several; but I'll stop so I don't further derail the thread.
Are there any replacement PCB's available for this board? I really hope I don't have a paper weight..