[GB] ORI CLS-1 by ORI-CLUB // Complete

[BruceDinh]

Hi everybody,
I'm Bruce Dinh, a mechanical keyboard designer. Owned by ORI-CLUB, my personal studio.
I was the former designer of the Makeaboard team (MAB). Team MAB has a bad past when the team disbanded and was unable to complete the GB 60S keyboard - 2018. And yes, MAB team would have said it was scam.
Emphasize that I am only a designer and not allowed to make decisions about production and finance on team MAB.
 This is link my IC POST, which has detailed everything my story. There are also protests, some agree. Make sure if you decide to participate in GB ORI, you understand me and my story.

Money is in your hands, decide on your own. But I really want to go back to the cleanest.
 This time, ORI-CLUB is a very personal thing of my own, designed by me and I take all responsibilities. And also forever only one person belongs to ORI-CLUB, it's me.

ORI CLS-1 by ORI-CLUB

Ori X GMK Sumi

ORI CLUB's social network:

Discord sever
Instagram
Website

Design overview.
 This is a design I have wanted to make for a long time, especially the side profile combined by 2 materials // 2 different colors.
ORI CLS-1 inside isolate isolate custom gasket + leafspring plate switch, Infinity 87 PCB + daughter pcb by Mechlovin '.
The logo of the sun and the paper crane reach out to the sun, which means good luck and always want to reach for better and more perfect things.
The extra weight will have a combination of 3 materials to create a contrast and emphasize the sunrise.




ORI CLS-1 Features:
TKL Form
7° Typing angle
6xxx aluminum top and bottom, brass accent
Polished or sandblasted accent options
Isolated gasket sandwich mount
Leaf spring switchplate
PCB : ORI CLS-1 custom designed by Mechlovin'
Kit includes case, plate, PCB, custom gaskets, bumpon feet, case screws, Travel case ( same with TX bag )

Configuration:

 Case top and Bottom colors:
   

• Anodized Black
• Anodized Silver
• Anodized Burgundy

Switchplate:

• Anodized Black
• Anodized Silver
• Anodized Burgundy
• Sandblasted Brass

Layouts:

• Standard (without blockers)
• Winkeyless (with blockers)

Side profile:

• Anodized Black
• Anodized Silver
• Anodized Burgundy
• Sandblasted Brass
• Stainless Steel Polished

All options


For example:
Case: Silver
Logo: Burgundy
Plate: Burgundy
Side profile: Burgundy


Inside :

• Custom gasket // Topmount
• Daughter pcb
• Ori Club mark

Cost:

 Base kit : ($550)

• Aluminium case / Aluminium side profile / Aluminium plate / Aluminium Weight

 Add-on:
 Sideprofile
   

• Sandblasted Brass / sideprofile : + 15$
• Stainless Steel Polished / side profile : + 25$

  Plate

• Sandblasted Brass / plate : + 25$

Logo the Sun:

• Sandblasted Brass / Logo : + 20$

Weight :
 

• Default : + 75$

 Extra:
 

• PCB : 50$
• Plate alu/brass: 35/45$

Limited-run:
ORI CLS-1 will be limited to 25 Slot, using Raffle.
ORI CLS-1 raffle goes live at 10PM (GMT + 7) August 1st. The window to submit will only be open in 1 hour. One entry per person.

20 slots worldwide
05 slots local market.
ORI-CLUB is my own studio and is very new so if you have any questions please join the Ori-club Discord sever. Sever is the only manager, so you can text me directly.

Group Buy will be hosted on my website: www.ori-club.comMy website is still in the process of completion so please be aware of some minor errors (even the website is self-edited!)

* Limited 25 slots because my financial capacity is limited, and I want to have 05 slots opened at Local market to prove that I am clean in GB this time.
* To me Raffle is a fair rule, and I believe that limited-times-raffles will be a rule that fits in a small number (25 slots) like this GB.

Resources:

Album render
Soundtest:

Photoshot Prototype V3 : https://imgur.com/gallery/O3iNUKj


Special thanks:
Thank you to everyone who supported me through the IC process.
Thank you guys at the local community for not judging me too much.
Thank you to the Mechlovin team 'for helping me a lot.
Thank you to the mod team GH for giving me the opportunity to return.

[HoffmanMyster]

GB is approved with the understanding that OP will disclaim their history (done so above - I added the glow effect since you couldn't read the white text on Austere theme), for all potential buyers to be made aware and decide to proceed with all relevant information available. 

[riChip]

nice board GLW GB

I think you missed the price on
the Base Kit under

'Cost :

 Base kit :...
'
or will it be determined later ?

[logo4poop]

GLWGB, I hope that you can redeem yourslelf 

[BruceDinh]

GB is approved with the understanding that OP will disclaim their history (done so above - I added the glow effect since you couldn't read the white text on Austere theme), for all potential buyers to be made aware and decide to proceed with all relevant information available. 

Thanks, I appreciate that

GLWGB, I hope that you can redeem yourslelf 

nice board GLW GB

I think you missed the price on
the Base Kit under

'Cost :

 Base kit :...
'
or will it be determined later ?

Thanks, i edited

[Etherealsound]

It's happening! Summoning all my luuuck

[nsyinc]

can you clarify the aluminum weight in the base kit and the default weight in the add on option?

is the aluminum weight the same as the default just all pieces made out of alu?

or is the default weight add on  the only weight option?

[BruceDinh]

can you clarify the aluminum weight in the base kit and the default weight in the add on option?

is the aluminum weight the same as the default just all pieces made out of alu?

or is the default weight add on  the only weight option?

Im just create info show all the options

[kiyoboard]

May the raffle gods be with me

[packman86]

Great looking TKL! Good luck with the raffle, Bruce!

[Anthixious]

Still in for the GB.

[BruceDinh]

Sorry for the delay, but here it is, Soundtest ORI CLS-1 with Gateron Yellow standard
This gasket I use is thinner than the offical gasket.
Offical Gasket I ordered in China, so I couldn't produce it in time for the prototype, so I had to use the thinner one

[Minam]

When are the winners announced?

[BruceDinh]

When are the winners announced?

I will create a discord group for the winners to know each other, but that's when ORI is ready to ship.
At least 3/20 people do not want to show off.

I'm collecting money now

[rafamundez]

The groupbuy was a giant sh**show. No recaptcha. Anyone who ordered in the last 15 min was cut out. Apparently the people who won needed to respond ASAP to emails to prove they weren't a bot. Someone on the discord said: "For a GB from a group who's trying to clear their name, there's ton of red flags with transparency already."  This eloquently sums up how the GB went.

[cwestwood]

I believe the reason all the entries from the last 15 min were cut out was the amount of bots who entered the raffle. I believe at the 45 min mark the number of entries was sitting at 1k but in the last 15 min 3000 entries were made. These were assumed to be from mostly bots so they were cut out.

[BruceDinh]

So everything is almost done, I'm sorting and waiting for the PCB to finish QC. Hope next weekend everyone can get their hands on my product.

I only took a few photos because the arrangements were made, so I was very lazy to take pictures again because I was afraid of the mistake













Thanks

[3ambutter]

That red board is something else. Well done sir

[BruceDinh]

That red board is something else. Well done sir

Thanks man

[BruceDinh]

The last batch has been sent.

[Puddsy]

credit where it's due the man shipped his boards

congrats on the gb

[The_Boom_Boy]

So everything is almost done, I'm sorting and waiting for the PCB to finish QC. Hope next weekend everyone can get their hands on my product.

I only took a few photos because the arrangements were made, so I was very lazy to take pictures again because I was afraid of the mistake

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Those are some sexy boards!

[Leir]

 -

[DukeEsquire]

Congrats on the GB. Probably one of the fastest and smoothest GBs I can remember.

[Solotov]

Any chance for round 2?

[one1wish]

Just got mine in. I'm more than impressed by the build quality and presentation. I am happy to have been a winner, and I hope I can win another ORI in the future!

[hkhawk]

That red is stunning

[Poesjuh]

Didn't join due to price, but gratz on this GB! Fast turnaround and you certainly redeemed yourself. Boards look stunning!

[pnw-g]

Huge congrats, Bruce! I need an ORI in my life now cheers

[ljyel]

Wasn't able to join the GB but damn am I jealous. Board looks beautiful and can't wait to see what other projects you have in store for everyone to enjoy!

[Vadurr]

wtb wkl ori :eyes:

[cemoon]

I have nothing to say. It's beautiful!!

[logo4poop]

Ayy, Congrats. Hopefully your next boards will be as quick as this one  . Good luck with the rest of the units!

[BruceDinh]

Thank you for accompanying this Gb, I know that there are many regrettable problems. But that gives me more resources to do my next projects in a better way. Thanks again from the bottom of my heart.

[Etherealsound]

Man, the QC (based off the photos) combined with the speed that these came out puts a lot of GB runners to shame. Ironic too, given how much flak he was being given though the warning was warranted. At any rate, if there is anyone out there who is unhappy with their board for whatever reason, I am more than willing to buy it off ya.