Author Topic: [WTB] SpongeBob dyesubs, ti gray Jane v1 wkl top (Read 47317 times)

romevi · « **on:** Mon, 06 July 2015, 16:00:09 »

romevi's DON'T WANT

~~Looking to sell a bag of unused Novelias. $55 chimped.~~ SOLD

More

romevi's WANT

!CASE-TOP SWAP! TGR Jane Round 1 Titanium Gray
This is a shot in the dark in the basement, aiming for a faraway galaxy.
Looking to swap my Winkey top case of the titanium gray Jane for a Winkey-less version. There are only a few of each, if that, but I don't know who all has a ti-gray Jane these days, so I'm just posting in classifieds.

Topre Purple Silent Sliders - enough to fill a Realforce TKL[/size]

Swiss Studio SpongeBob SquarePants PBT Dyesubs
- need the ones unchecked below

romevi · « **Reply #1 on:** Mon, 13 July 2015, 16:27:48 »

Traded

More

~~WTTF~~ PENDING
I love KeyKollectiv caps; I love Booper caps. A marriage between the two was a dream come true, but, sadly, all these months later and the cap doesn't get much use from me. So it ought to go to someone who will give it more loving.

I received it directly from the raffle, but there are two things I'd like to point out. The color, I've noticed, appears more of a blue-green than solid blue when glowing, and the glowing is a bit weak. I charged it for about ten seconds directly under a light, turned off all lights while it was night, and the best picture I could get with my phone was this:

More

)

romevi · « **Reply #2 on:** Tue, 14 July 2015, 13:46:12 »

boppity

romevi · « **Reply #3 on:** Wed, 15 July 2015, 14:17:42 »

romevi · « **Reply #4 on:** Thu, 16 July 2015, 13:22:48 »

Bump for heute.

romevi · « **Reply #5 on:** Thu, 06 August 2015, 14:58:25 »

Tactile bump!

romevi · « **Reply #6 on:** Wed, 02 September 2015, 17:11:41 »

Bibidi

romevi · « **Reply #7 on:** Wed, 09 September 2015, 09:33:23 »

Babidi

romevi · « **Reply #8 on:** Fri, 11 September 2015, 17:47:26 »

Phirr · « **Reply #9 on:** Fri, 11 September 2015, 20:11:47 »

I think I PM'd you (possibly twice?) Don't quite understand the PM system here yet

romevi · « **Reply #10 on:** Wed, 16 September 2015, 09:36:20 »

Quote from: Phirr on Fri, 11 September 2015, 20:11:47

I think I PM'd you (possibly twice?) Don't quite understand the PM system here yet

Thanks! I think I replied back...

Also, OP modified.

romevi · « **Reply #11 on:** Tue, 03 November 2015, 10:11:56 »

November bump.

romevi · « **Reply #12 on:** Tue, 17 November 2015, 09:53:41 »

blimp

heroinbob · « **Reply #13 on:** Wed, 18 November 2015, 23:18:46 »

I have:
4x black mx switches (plate and pcb)
brown mx switches (pcb)
clear mx switches (pcb)
linear grey mx switches (pcb)
(also have tactile grey)
6.25 pbt space bars

Have cherry pcb stabilizers too (if you need them)

The pbt space bars, pcb stabs, clears, browns, and tactile greys came from g80-8113lrcus boards (I've parted out a lot of them ~ have full keycaps w/ relegendables as well)

I'm in US (California), I ship CONUS (will do canada too) only.

Paul (HB)

romevi · « **Reply #14 on:** Thu, 19 November 2015, 10:44:52 »

Quote from: heroinbob on Wed, 18 November 2015, 23:18:46

I have:
4x black mx switches (plate and pcb)
brown mx switches (pcb)
clear mx switches (pcb)
linear grey mx switches (pcb)
(also have tactile grey)
6.25 pbt space bars

Have cherry pcb stabilizers too (if you need them)

The pbt space bars, pcb stabs, clears, browns, and tactile greys came from g80-8113lrcus boards (I've parted out a lot of them ~ have full keycaps w/ relegendables as well)

I'm in US (California), I ship CONUS (will do canada too) only.

Paul (HB)

PM'd

Also, daily bump.

romevi · « **Reply #15 on:** Fri, 20 November 2015, 16:36:50 »

bump!

romevi · « **Reply #16 on:** Sat, 28 November 2015, 18:48:33 »

romevi · « **Reply #17 on:** Tue, 01 December 2015, 10:08:05 »

romevi · « **Reply #18 on:** Thu, 03 December 2015, 11:21:42 »

post-rollback bump

romevi · « **Reply #19 on:** Wed, 09 December 2015, 11:19:55 »

romevi · « **Reply #20 on:** Mon, 14 December 2015, 09:38:53 »

Added CMYW.

SpAmRaY · « **Reply #21 on:** Mon, 14 December 2015, 10:31:27 »

What is a DSA big red eject? You just want a red dsa cap with the word eject on it?? I'll look around but I think I threw all that stuff away.

romevi · « **Reply #22 on:** Mon, 14 December 2015, 10:37:44 »

Quote from: SpAmRaY on Mon, 14 December 2015, 10:31:27

What is a DSA big red eject? You just want a red dsa cap with the word eject on it?? I'll look around but I think I threw all that stuff away.

They used to be on PMK. Basically it's a set of two DSA caps in red, one with the word "EJECT" and the other with an eject symbol. Here's an image:
https://www.mechanicalkeyboards.co.id/assets/uploads/products/thumbs/1125x1125/MKID_Big_Red_Eject_DSA_1.jpg.

SP offered them as group buys earlier this year, one in SA and one in DSA. I have SA, but am looking for DSA.

SpAmRaY · « **Reply #23 on:** Mon, 14 December 2015, 10:39:11 »

Quote from: romevi on Mon, 14 December 2015, 10:37:44

Quote from: SpAmRaY on Mon, 14 December 2015, 10:31:27
What is a DSA big red eject? You just want a red dsa cap with the word eject on it?? I'll look around but I think I threw all that stuff away.

They used to be on PMK. Basically it's a set of two DSA caps in red, one with the word "EJECT" and the other with an eject symbol. Here's an image:
https://www.mechanicalkeyboards.co.id/assets/uploads/products/thumbs/1125x1125/MKID_Big_Red_Eject_DSA_1.jpg.

SP offered them as group buys earlier this year, one in SA and one in DSA. I have SA, but am looking for DSA.

I've still got some crap bag caps in storage next time I run across them I'll take a look.

romevi · « **Reply #24 on:** Mon, 14 December 2015, 10:44:48 »

Quote from: SpAmRaY on Mon, 14 December 2015, 10:39:11

Quote from: romevi on Mon, 14 December 2015, 10:37:44
Quote from: SpAmRaY on Mon, 14 December 2015, 10:31:27
What is a DSA big red eject? You just want a red dsa cap with the word eject on it?? I'll look around but I think I threw all that stuff away.

They used to be on PMK. Basically it's a set of two DSA caps in red, one with the word "EJECT" and the other with an eject symbol. Here's an image:
https://www.mechanicalkeyboards.co.id/assets/uploads/products/thumbs/1125x1125/MKID_Big_Red_Eject_DSA_1.jpg.

SP offered them as group buys earlier this year, one in SA and one in DSA. I have SA, but am looking for DSA.

I've still got some crap bag caps in storage next time I run across them I'll take a look.

I'd love you forever.

Or at least until the sale goes through.

romevi · « **Reply #25 on:** Wed, 16 December 2015, 16:43:22 »

choo choo

romevi · « **Reply #26 on:** Fri, 18 December 2015, 20:57:16 »

Force bump

romevi · « **Reply #27 on:** Mon, 21 December 2015, 10:01:16 »

pre-Xmas bump

romevi · « **Reply #28 on:** Tue, 22 December 2015, 10:20:34 »

bump
Bros ~~added~~ sold

romevi · « **Reply #29 on:** Tue, 29 December 2015, 12:05:24 »

bumpaddle

romevi · « **Reply #30 on:** Sat, 02 January 2016, 13:32:47 »

bump, just selling for now

KoalaKaiser · « **Reply #31 on:** Sat, 02 January 2016, 13:37:12 »

PM'd broh

odd · « **Reply #32 on:** Sat, 02 January 2016, 15:38:34 »

I'll take the aoBao Red Keycap Holder

and the sadster cap please

edit, I'll take the 1up cap as well if you toss in another sadster

romevi · « **Reply #33 on:** Tue, 05 January 2016, 09:51:46 »

Edited. Added a GirlDC cap.

romevi · « **Reply #34 on:** Wed, 06 January 2016, 11:40:49 »

Bump. Updated.

romevi · « **Reply #35 on:** Fri, 15 January 2016, 20:50:15 »

bump

Still looking for gunmetal WoB Vader (or weathered if nothing by the end of the month).

romevi · « **Reply #36 on:** Tue, 19 January 2016, 10:27:16 »

blump

romevi · « **Reply #37 on:** Fri, 22 January 2016, 17:39:07 »

Bump. Still searching for a gunmetal WoB Vader...

romevi · « **Reply #38 on:** Mon, 01 February 2016, 17:22:19 »

Bump!

Got my WoB and Vader and CMYW/RGBYW. Thanks!

romevi · « **Reply #39 on:** Fri, 05 February 2016, 15:36:48 »

weni...

romevi · « **Reply #40 on:** Wed, 10 February 2016, 10:46:44 »

widi...

Added stuff for sale and on the look-out for.

UsualSuspectXXX · « **Reply #41 on:** Wed, 10 February 2016, 11:02:14 »

romevi · « **Reply #42 on:** Thu, 11 February 2016, 14:36:45 »

wici...

Zombro and green GMK Esc are outta here.

romevi · « **Reply #43 on:** Sun, 14 February 2016, 21:17:53 »

Bump. Mad huntin' for SPRiT 72g springs and 7u gold stab sets.

romevi · « **Reply #44 on:** Thu, 18 February 2016, 12:27:48 »

Bump. Still needin' SPRiT's 72g springs and gold stabs.

romevi · « **Reply #45 on:** Mon, 22 February 2016, 21:27:38 »

romevi · « **Reply #46 on:** Tue, 05 April 2016, 16:33:28 »

Venatorious · « **Reply #47 on:** Tue, 05 April 2016, 19:48:46 »

Once I get a better desoldering iron I can sell you 104 SKCM oranges

romevi · « **Reply #48 on:** Tue, 05 April 2016, 22:13:20 »

Quote from: Venatorious on Tue, 05 April 2016, 19:48:46

Once I get a better desoldering iron I can sell you 104 SKCM oranges

eohmiller · « **Reply #49 on:** Sat, 09 April 2016, 20:49:39 »

Just a heads up, if you are still looking for that Alps64 PCB, /u/vivalarevolución has one up on the market for $110+shipping.

News:

Author Topic: [WTB] SpongeBob dyesubs, ti gray Jane v1 wkl top (Read 47317 times)