Standard Kit Link (https://docs.google.com/forms/d/1vkEi35L5diBy2GQ0TUMvpM7qaRk9B7jSk5FA_qUyiv0) | Limited Edition Link (https://docs.google.com/forms/d/1ZcAI_0x5ix4LJpW2qvyhZVIcH0ZMHCwKJLXyyIS5Ta4/) |
(https://i.imgur.com/DeU340h.jpg?1) | (https://i.imgur.com/8XTQXaY.png) |
(https://i.imgur.com/SWUW4Zr.jpg) | (https://i.imgur.com/731SlNE.jpg) |
(https://i.imgur.com/A7NJYEJ.jpg) | (https://i.imgur.com/sNtFC6p.jpg) |
(https://i.imgur.com/qJ0LKLh.jpg) | (https://i.imgur.com/iAchPx8.jpg) |
(https://i.imgur.com/wmgfSUF.jpg) | (https://i.imgur.com/dfmWt6h.jpg) |
(https://i.imgur.com/CYvf9GN.jpg) | (https://i.imgur.com/IJbodfk.jpg) |
(https://i.imgur.com/TF4MC5T.jpg) | (https://i.imgur.com/lklIdqx.jpg) |
(https://i.imgur.com/BEYLQlh.jpg) | (https://i.imgur.com/R9eqNPi.jpg) |
This image shows the slightly modified bottom to allow for easier access to the daughterboard and better cable management. | (https://i.imgur.com/ILyog7c.jpg) |
|
Black (https://i.imgur.com/w8HOBst.png) | Blue (https://i.imgur.com/PupL6IP.png) | Red (https://i.imgur.com/3bmAjwv.png) | Gray (https://i.imgur.com/R4Izwlv.png) |
(https://i.imgur.com/IzubwnZ.png) | (https://i.imgur.com/xFTkS1f.png) |
(https://i.imgur.com/DK0abdK.png) | (https://i.imgur.com/a3SF9KN.png) |
(https://i.imgur.com/EHYYQ4G.png) | (https://i.imgur.com/fkUoOka.jpg) |
|
|
Just realised that silver option is gone :( But still a must buy for me , hope I can secure a spot.
The insert idea is honestly fantastic! Do you plan to support more insert colors sold separately in the future? Are you open to offering E-white in any future run of this board, or is it only for limited edition in the first round?
Mmmm Lilac with graphite insert that would look amazing, sorry just thinking and writing
Sent from my iPhone using Tapatalk
Where will the signups be hosted? Website, Google Form, Other?
Board looks great.
Where is this shipping from?
Can we order both LEs on the form or is it limited to one board?
Sorry for my ignorance, if the brass is not PVD, does it mean that it will get rusted easily?
Can we order both LEs on the form or is it limited to one board?
You cannot order both LE’s on the form at once sorry.
It’s a shame your logo isn’t the Monarch from Ventura Brothers. I’m sure that would have brought a whole different set of issues though. Anyways... gl to everyone in the GB.
Also are there any options for plate color? Or we don't get to choose?
Just realised that since I don't know whether I made it to the limited edition, should I go for the standard one as well for securing a spot?
That wasn't so bad. 3 pages went pretty quick. Hope I actually get a slot for once. Great keyboard design, I love anything unique. Nice job and I look forward to your next creation!
Submitted. Hopefully I win :)
Submitted. Hopefully I win :)
Now the painful waiting time begins until invoices are out :'(
How soon will invoices be out? no rush
Also, if we didn't make LE, we're defaulted to standard?
I submitted the form for the LE but wasnt sure if i put my discord user in correct, so i submitted another one, is that okay? I will only purchase 1 board.
Will the invoice also show the options we chose?
Will we be able to modify our orders (like in terms of the extras)? In a rush to get a spot for the LE I might have chosen the wrong additional insert color.
Since I got in for LE just double checking that definitely means I got a spot?
Also just wondering when the invoices are gonna be sent out, no rush on it just was interested.
Pm'd
anyway, can't find the white color for the top-bottom option in the form, i can see it only for the insert, is that a mistake?
Hi, just wondering when should I expect to receive the invoice/ get in contact due to the possible wrong discord user?
When should we expect to know if we got in on the standard edition?
When should we expect to know if we got in on the standard edition?
Hmm, haven't received my LE invoice yet. Pretty sure I signed up before he said there were slots remaining
Hmm, haven't received my LE invoice yet. Pretty sure I signed up before he said there were slots remaining
Same here so I think it'll just be later today that it gets sent out I presume.
Okay! Thank you! I am just kinda worried because I got it in between when he said there were 2 spots left and when he said it was all filled :(
Have the LE invoices been sent out?
Hmm, haven't received my LE invoice yet. Pretty sure I signed up before he said there were slots remaining
Hi, just wondering when should I expect to receive the invoice/ get in contact due to the possible wrong discord user?
Invoices for the LE kit should be out within the next 12 hours.
Please verify all the items are correct and PM me if there are any issues or discrepancies.
Thanks!
Hi, just wondering when should I expect to receive the invoice/ get in contact due to the possible wrong discord user?
Invoices for the LE kit should be out within the next 12 hours.
Please verify all the items are correct and PM me if there are any issues or discrepancies.
Thanks!
Hi, just wondering when should I expect to receive the invoice/ get in contact due to the possible wrong discord user?
Invoices for the LE kit should be out within the next 12 hours.
Please verify all the items are correct and PM me if there are any issues or discrepancies.
Thanks!
Hello There were errors with the invoice and I sent you a pm!
Howdy, the listing mentions that each kit will also be shipped with a carrying case, but there's also a case listed as an extra for $20. Is the $20 for a fancier version of the case? Looking forward to seeing one of these in person, the photos and renders look super nice!
I'd like one just like this, please: https://lh6.googleusercontent.com/IlWA3dTX_8bs3V1giopxsXhe__Hl8iddUNrdbqu4rcnWZT5PRgnbJM6HuqYPnM2XCapyLMmM19jFOLZ96d-MwyQmAQoGlXUo22erhcL2S8Mset_HHZHpjzqjp8IviQ=w740
https://i.imgur.com/sNtFC6p.jpg
I think I messed some items in my order. Will I be able to change some of the options I picked once I get the invoice?
To the people who got the LE edition, any plans to get the brass insert coated so it doesn't patina fast? Trying to avoid that if possible.
To the people who got the LE edition, any plans to get the brass insert coated so it doesn't patina fast? Trying to avoid that if possible.
Maybe, even the weight.
To the people who got the LE edition, any plans to get the brass insert coated so it doesn't patina fast? Trying to avoid that if possible.
Maybe, even the weight.
What kind of coating though? PVD, Ceramic, Cerakote? Any recommendations?
To the people who got the LE edition, any plans to get the brass insert coated so it doesn't patina fast? Trying to avoid that if possible.
Maybe, even the weight.
What kind of coating though? PVD, Ceramic, Cerakote? Any recommendations?
I'm not too well-versed on these things too haha. But I think clear coating is enough. Maybe DoCallMeKing can help chime in.
If you do a second round, will you add anything to differentiate the R1 boards from the R2 boards for exclusivity sake? or maybe completely different colors? just a thought.
PLEASE do a R2, this one came at just the worst time for me personally (medical plus Christmas plus pandemic)If you do a second round, will you add anything to differentiate the R1 boards from the R2 boards for exclusivity sake? or maybe completely different colors? just a thought.
It's still very early to tell if there would be a round 2 or not but there would for sure be completely different color options for the inserts and some other small modifications I would do to differentiate the rounds.
PLEASE do a R2, this one came at just the worst time for me personally (medical plus Christmas plus pandemic)If you do a second round, will you add anything to differentiate the R1 boards from the R2 boards for exclusivity sake? or maybe completely different colors? just a thought.
It's still very early to tell if there would be a round 2 or not but there would for sure be completely different color options for the inserts and some other small modifications I would do to differentiate the rounds.
Is this thread the best place to keep an eye out for one of those extras...?PLEASE do a R2, this one came at just the worst time for me personally (medical plus Christmas plus pandemic)If you do a second round, will you add anything to differentiate the R1 boards from the R2 boards for exclusivity sake? or maybe completely different colors? just a thought.
It's still very early to tell if there would be a round 2 or not but there would for sure be completely different color options for the inserts and some other small modifications I would do to differentiate the rounds.
I understand the timing might not be best for people with all the happenings in the world. I'll for sure gauge the interest and see what happens.
Just an FYI, there will be some extras :)
Best of luck with everything and happy holidays.
That’s what I want!!! Amazing stuff!!!
Is this thread the best place to keep an eye out for one of those extras...?PLEASE do a R2, this one came at just the worst time for me personally (medical plus Christmas plus pandemic)If you do a second round, will you add anything to differentiate the R1 boards from the R2 boards for exclusivity sake? or maybe completely different colors? just a thought.
It's still very early to tell if there would be a round 2 or not but there would for sure be completely different color options for the inserts and some other small modifications I would do to differentiate the rounds.
I understand the timing might not be best for people with all the happenings in the world. I'll for sure gauge the interest and see what happens.
Just an FYI, there will be some extras :)
Best of luck with everything and happy holidays.
I forgot to ask before but on the LE boards will there be anything to specify which number board you have?
Would be kinda cool to just know which of the 50 I have.
When will you make the plate file public for us ISO users? I'd like to have one cut before the board arrives :)
Do we have a dischord channel for updates? Or the updated information will mostly be post here?
Is there room enough inside the case for 0305 mill sockets by the way? Just want to make sure.Is it possible to file the mill sockets down till they fit, or would that make them not function somehow?
Is there room enough inside the case for 0305 mill sockets by the way? Just want to make sure.
Is there room enough inside the case for 0305 mill sockets by the way? Just want to make sure.Is it possible to file the mill sockets down till they fit, or would that make them not function somehow?
Are there plans to also provide padding foam between the plate and the PCB?
Do you know how 'thick' is the spacing between pcb and the case? In case I wanna buy foam myself, how thick would you suggest?Are there plans to also provide padding foam between the plate and the PCB?
Not at this time as personally I don't think its necessary. I love the sound of the board in its current state. Obviously everyone's preferences will be different though.
Do you know how 'thick' is the spacing between pcb and the case? In case I wanna buy foam myself, how thick would you suggest?Are there plans to also provide padding foam between the plate and the PCB?
Not at this time as personally I don't think its necessary. I love the sound of the board in its current state. Obviously everyone's preferences will be different though.
not sure if this is the place to ask for updates but... any updates?
I know building a website is easier then ever now-a-days, but that is an awesome website. Very well done and put together.not sure if this is the place to ask for updates but... any updates?
Hey Mate!
We've been working on getting the website up and going so we have a clean and concise area to deliver the updates through. We're putting the finishing touches on it so it should be online very soon.
The website will be....
www.Kingkbs.com
Thanks!
I know building a website is easier then ever now-a-days, but that is an awesome website. Very well done and put together.not sure if this is the place to ask for updates but... any updates?
Hey Mate!
We've been working on getting the website up and going so we have a clean and concise area to deliver the updates through. We're putting the finishing touches on it so it should be online very soon.
The website will be....
www.Kingkbs.com
Thanks!
And that blue and red combo keeb would look SO good with some Laser on it..
can't wait for another update!
Any rough estimation on when they will be shipped? Just want an rough time so that I can live with hope for the next few months
Btw, updates are prompt and nice, appreciated!
Wow one of the fastest GB ever.
Will there be a round 2? :-[
Why am I always too late...
Wow, how many boards are there in total?If not, i'll snag any "b-stock" quick snap! Gimmie gimmie gimmie!
Hope everything goes right in the QC!
Please do a round 2.. or make a 1800 layout.
Wow, the qc is hell quick, did you get a group of helpers to do them?
You should make a wait list for the peeps that want an extra...and put me at the top, obviously :cool:.Haha. We'll try and be as fair as we can when the time comes :)
Got shipping invoice, but goddam 100 USD. Ooof..Yea as I'm sure you're aware, shipping prices have skyrocketed along with everything else due to covid. Even before covid, international shipping was always expensive from the US to anywhere else besides Canada/Mexico.
Well, i managed to score a Monarch, after market so to speak. Super stoked. What's the deal with the extra inserts?
Hey! I've received my Monarch and I'm quite happy with it overall but I seem to have a slight issue with the encoder that persists even with the extra one I replaced the included one with. Best way to explain it is that the right turn would also occasionally actuate the left turn action. It seems to be prominent on the end of the turn as if stopping in between detents and having that slight turn back causes this. For example, I'd use Via to make left turn be 'A' and right turn be 'B' ; a long right turn would sometimes result in something like 'bbbbbbbbbbbbbba' and rapid, successive ones would result in 'bbbbaabbbbbaabbbbbba' or something similar. Like I've said, I've replaced the original with an extra and the issue still persists. Do you think it may be an issue with the encoder itself (both Alps), the pcb/firmware, or possibly something may have happened when I soldered the encoder? Any guidance would be very appreciated. Thanks and keep up the good work!
There's for sure something wrong with the programming of the rotary encoder, it jumps back and forth quite a lot. Even more noticeable if you bind it to page up/down.
From what you are describing it sounds like the encoder is actually occasionally actuating in-between detents. If this is the case we should be able to make some adjustments to the firmware in order to correct this behavior.
We will speak to our PCB designer to investigate this further. Thank you for the information.
We will report back as soon as we have something concrete.
Thank you again!
From what you are describing it sounds like the encoder is actually occasionally actuating in-between detents. If this is the case we should be able to make some adjustments to the firmware in order to correct this behavior.
We will speak to our PCB designer to investigate this further. Thank you for the information.
We will report back as soon as we have something concrete.
Thank you again!
No problem, all to make it an even better product!
We've done some more local testing and also reached out to a few buyers to confirm our fix and the results are very positive.
In order to get the encoder functioning more exactly, you will need to go to our site and download the latest firmware to flash onto your pcb.
The file is located on our Files page at https://kingkbs.com/pages/files (https://kingkbs.com/pages/files) , it is labeled "BIN file for flashing".
Once you download it, you'll need to use QMK Toolbox to flash it to your pcb and then you should be all set.
Perfection! Very smooth process for a first time GB. I'm a very satisfied customer!
Wish i could get a brass insert... I really want my keyboard to be so heavy, it crushes my desk when i set it down...
Finally got my monarch!
Will there be a build guide? Or basically is it okay if I just follow Taeha video to build?
Also, the JSON file for VIA Design Tab in the website is not working for download.
Good guy king, no markup for the extras.