geekhack
geekhack Marketplace => Interest Checks => Topic started by: sethk_ on Thu, 02 July 2015, 23:56:56
-
Hi, was looking into running a GB for 1.8mm LEDs, and I would be getting them from an aliexpress store. Available colors:
Yellow
(http://i.gyazo.com/628a7725ab8cb2851e9f43b1c71fd266.png)
Green
(http://i.gyazo.com/51b1014650d7ca56f637f541d2111b3d.png)
Red
(http://i.gyazo.com/24982eb6e7fc55e66bcb1bb26bf9d108.png)
Blue
(http://i.gyazo.com/e57c0483fe9097d997fe5b1a1f2780cc.png)
White
(http://i.gyazo.com/21d98a01dd85f0aaf5451041e9777a0d.png)
Pink
(http://i.gyazo.com/7be7f6fab2de76abf23b05808244e9fa.png)
These are about 2c-5c each, and each has an MOQ of 1000.
I am sure I could get the price lower if I talk to the supplier, which I will try and do while the IC runs.
-
Who is this guy? Can we get a mod in here and stop him posting please?
100x both white and blue please :)
-
Could this fit on my KBT Race 1? I have some already dime out I know eventually I needa replace them. Thanks.
(http://i.imgur.com/ZuRONxH.jpg)
-
At those prices I'd buy at least 100 of each color
-
Could this fit on my KBT Race 1? I have some already dime out I know eventually I needa replace them. Thanks.
Yes! These are actually shorter, so you shouldn't have any clearance issues like some 3mm and 2x3x4mm rectangle LEDs
-
I'd be interested in green and pink. Probably about 100 of each.
-
Interested in green.
-
Hmmm. Interesting... Maybe I'll get in on this
-
Might want to get in on this, stock up on some
-
would anyone be interested in SIP sockets?
-
Sorry for what is probably a non-technical question, but are these rectangular with a small round dome sticking out?
-
would anyone be interested in SIP sockets?
Yes, very much so.
I'd also be in for a couple hundred LEDs.
-
would anyone be interested in SIP sockets?
Yes, very much so.
I'd also be in for a couple hundred LEDs.
Great!
In that case I'm interested in probably a couple of dozen of each.
-
would anyone be interested in SIP sockets?
If they have long solder tails, definitely yes.
In for the LEDs too.
-
At those prices I'd buy at least 100 of each color
Same here, you never know what colors you might want in the future. At these prices its a good opportunity to stock up! I'm also down for at least 100 of each color.
-
would anyone be interested in SIP sockets?
If they have long solder tails, definitely yes.
In for the LEDs too.
Same here, definitely interested in both LEDs and SIP sockets with longer solder tails
-
Sorry for what is probably a non-technical question, but are these rectangular with a small round dome sticking out?
Yes they are.
-
would anyone be interested in SIP sockets?
If they have long solder tails, definitely yes.
In for the LEDs too.
Same here, definitely interested in both LEDs and SIP sockets with longer solder tails
I will be getting them from Zeal, and his are nice because they have an even longer leg than the milmax ones
-
would anyone be interested in SIP sockets?
If they have long solder tails, definitely yes.
In for the LEDs too.
Same here, definitely interested in both LEDs and SIP sockets with longer solder tails
I will be getting them from Zeal, and his are nice because they have an even longer leg than the milmax ones
Awesome. I'm in for a metric ****ton. ;D
-
After soldered SIP socket on the switch, we can swap any led any time? Like this one?
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1269
-
After soldered SIP socket on the switch, we can swap any led any time? Like this one?
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1269
Yep!
-
I'd be down for 30 white, 30 pink and 30 orange. :p
-
I would definitely join in on this for at least 100 of each color. I'd be interested in SIP sockets too.
-
I would be in for 100 Green. I plan on putting these on my Poker :D and having some spares in case I mess up lol
-
Awesome! Interested in 200 white, 50 each other colors & interested in SIP sockets too :D
-
I'd be in for 100 of each, maybe more.
-
Would be interested in LEDs and sockets
-
I'd like 100 of each led color except pink.
And I am interested in sockets Depending on price about 200.
-
In for a couple hundred of each color for the LEDs and probably want some sockets too! Was just about to look for this stuff elsewhere too!
-
would anyone be interested in SIP sockets?
/signed :thumb:
-
i would be interested in SIP sockets and depending on price, a few hundred led's to have around for swapping after i install the SIPS on my boards.
-
The best part about these SIP sockets is that they are pre-separated :) let me confirm price
-
What would be the shipping to Europe for leds and sip sockets?
-
What would be the shipping to Europe for leds and sip sockets?
Don't quote me, but should be under 5$
-
Count me as interested for both the LEDs (blue,green,white) and Sip Sockets. working on building a board now and needed some LEDs
-
I'm down for 100 pieces of all the colors and SIP sockets too, if available. :D
-
Anyone have experience swapping 1.8mm leds with sip sockets? 2x3x4 has a good amount of area to grab with needle nose pliers but it doesn't seem like 1.8mm would
-
I'm down for 100 pieces of all the colors and SIP sockets too, if available. :D
Orders like this = MOQ easily met :D
-
Anyone have experience swapping 1.8mm leds with sip sockets? 2x3x4 has a good amount of area to grab with needle nose pliers but it doesn't seem like 1.8mm would
I guess it depends how tight you placed your SIP sockets.
Some of the 1.8mm LEDs I got from this vendor on eBay (colorfulplace888 (http://stores.ebay.com/colorfulplace888)) had some minor defects in the plastic molding so those ones were painful to swap !
-
Anyone have experience swapping 1.8mm leds with sip sockets? 2x3x4 has a good amount of area to grab with needle nose pliers but it doesn't seem like 1.8mm would
Tweezers or pliers works
-
I could be talked into at least some blue and white (100 ea) plus SIPs.
-
I guess I will message the appropriate people, see about MOQ deals and price tiers, and then I will aim to launch around the 13th.
-
I guess I will message the appropriate people, see about MOQ deals and price tiers, and then I will aim to launch around the 13th.
I love these leds. They're cute little buggers
-
I'd be in for 400 white :thumb:
-
Talk to them and see what the price is when you reach 10,000 because that should be fairly easy to reach. I was getting quoted about half a cent each from one of my suppliers.
-
Okay, I have most of the stuff worked out, so I will set up everything soon and then launch Sun/Mon
-
I'd be down for 110 of every color
-
I would deffinitly buy several hundred.
-
Do you have any technical info about those LEDs (forward voltage/current)? Would probably be interested on it if the specs are right for my project.
-
A very rough count is at least 1100 of each colour, plus maybe another couple of hundred for most of the colours.
Very MOQ passed :)
-
Do you have any technical info about those LEDs (forward voltage/current)? Would probably be interested on it if the specs are right for my project.
I can check when I get back on a PC
-
A very rough count is at least 1100 of each colour, plus maybe another couple of hundred for most of the colours.
Very MOQ passed :)
Yep! I will be making the thread tomorrow, that way in case it takes a day or two to get approved I am not dwindling my thumbs
-
What is the anticipated (or hoped for) turn-around for this when it becomes a GB?
-
What is the anticipated (or hoped for) turn-around for this when it becomes a GB?
I think I will leave it open for 3 weeks to a month, and I have no estimate on shipping time, but LEDs are small and easy, so I will pick up packaging for INT orders right when it starts. Hopefully they will be packaged in a week after they arrive. I will have help sorting these so it should go quickly.
-
A very rough count is at least 1100 of each colour, plus maybe another couple of hundred for most of the colours.
Very MOQ passed :)
Yep! I will be making the thread tomorrow, that way in case it takes a day or two to get approved I am not dwindling my thumbs
Yay I can't wait for this to start :)
-
sethk_: Do you have prices on the SIP sockets yet?
-
sethk_: Do you have prices on the SIP sockets yet?
I think so. They are pre-separated from the plastic sleeves, so they are ~13c each. I personally like using these more and don't mind the premium since they are pre-separated.
-
sethk_: Do you have prices on the SIP sockets yet?
I think so. They are pre-separated from the plastic sleeves, so they are ~13c each. I personally like using these more and don't mind the premium since they are pre-separated.
A little disappointed on the SIP price. They are available ~8c each on mouser when you buy 10 just units (64 pieces each). The little sleeves pop off easily with flush cutters, not that much of an inconvenience imo. I'm still in for a big order of LEDs though!
EDIT: Forgot to acknowledge that the Zeal SIP sockets are slightly different than the MillMax ones on mouser. Both have worked great for me though, no preference for one or the other.
-
sethk_: Do you have prices on the SIP sockets yet?
I think so. They are pre-separated from the plastic sleeves, so they are ~13c each. I personally like using these more and don't mind the premium since they are pre-separated.
A little disappointed on the SIP price. They are available ~8c each on mouser when you buy 10 just units (64 pieces each). The little sleeves pop off easily with flush cutters, not that much of an inconvenience imo. I'm still in for a big order of LEDs though!
EDIT: Forgot to acknowledge that the Zeal SIP sockets are slightly different than the MillMax ones on mouser. Both have worked great for me though, no preference for one or the other.
I will look into it then, I could never find the proper ones on mouser, could you link me?
-
Can I buy just 1 LED of each color?
-
sethk_: Do you have prices on the SIP sockets yet?
I think so. They are pre-separated from the plastic sleeves, so they are ~13c each. I personally like using these more and don't mind the premium since they are pre-separated.
A little disappointed on the SIP price. They are available ~8c each on mouser when you buy 10 just units (64 pieces each). The little sleeves pop off easily with flush cutters, not that much of an inconvenience imo. I'm still in for a big order of LEDs though!
EDIT: Forgot to acknowledge that the Zeal SIP sockets are slightly different than the MillMax ones on mouser. Both have worked great for me though, no preference for one or the other.
I will look into it then, I could never find the proper ones on mouser, could you link me?
I believe that the long tail version of these sockets are sold out at Mouser, but I found it at Newark: http://www.newark.com/mill-max/311-93-164-41-001000/sip-socket-64-position-through/dp/17C4915?categoryId=800000006540
Buying 100 of these sockets make the cost near 10c each.
-
I found these:
http://www.mouser.de/ProductDetail/Mill-Max/311-93-164-41-001000/?qs=sGAEpiMZZMs%2fSh%2fkjph1tvt1%2fmEPT%2fXoN71pDqWYWck%3d
Used this (http://www.mouser.com/ds/2/273/065-259662.pdf) datasheet as a guide.
EDIT: These are the same as VinnyCordeiro's. Stock is at 47 and 183 are on order @mouser.
-
Yeah, 0.170" solder tail would be good... I've used the ones with 0.125" solder tails and they don't protrude from the PCB, so soldering them is tricky.
-
sethk_: Do you have prices on the SIP sockets yet?
I think so. They are pre-separated from the plastic sleeves, so they are ~13c each. I personally like using these more and don't mind the premium since they are pre-separated.
A little disappointed on the SIP price. They are available ~8c each on mouser when you buy 10 just units (64 pieces each). The little sleeves pop off easily with flush cutters, not that much of an inconvenience imo. I'm still in for a big order of LEDs though!
EDIT: Forgot to acknowledge that the Zeal SIP sockets are slightly different than the MillMax ones on mouser. Both have worked great for me though, no preference for one or the other.
I've since changed to a different type of SIP socket from what you've purchased. My individually removed SIP sockets have a ~5mm long soldering tail.
Yeah, 0.170" solder tail would be good... I've used the ones with 0.125" solder tails and they don't protrude from the PCB, so soldering them is tricky.
Milmax ones have a solder tail that's roughly 4.3mm. The ones I stock have a 5mm tail. :)
(Pic provided by sethk_)
(http://puu.sh/iSZNq/d87af3898e.jpg)
-
As far as Zeal's SIP goes, I can do 1.25 USD, that way shipping is covered, and that is at 1500 SIPs ordered. The other one I won't charge anything, I don't mind picking up shipping from mouser.
-
Can I buy just 1 LED of each color?
I don't see why you wouldn't be able to - most GBs do not have a minimum quantity per person. But that these prices why would you want to?
-
As far as Zeal's SIP goes, I can do 1.25 USD, that way shipping is covered, and that is at 1500 SIPs ordered. The other one I won't charge anything, I don't mind picking up shipping from mouser.
You said "~13c each" before, and now this "1.25 USD" figure has me confused... that's not "1.25 USD each", right?
-
As far as Zeal's SIP goes, I can do 1.25 USD, that way shipping is covered, and that is at 1500 SIPs ordered. The other one I won't charge anything, I don't mind picking up shipping from mouser.
You said "~13c each" before, and now this "1.25 USD" figure has me confused... that's not "1.25 USD each", right?
packs of 10, those would be some expensive SIP sockets lol
-
As far as Zeal's SIP goes, I can do 1.25 USD, that way shipping is covered, and that is at 1500 SIPs ordered. The other one I won't charge anything, I don't mind picking up shipping from mouser.
You said "~13c each" before, and now this "1.25 USD" figure has me confused... that's not "1.25 USD each", right?
packs of 10, those would be some expensive SIP sockets lol
And the 1500 SIPs is in total, so 150 packs of 10x
-
I found these:
http://www.mouser.de/ProductDetail/Mill-Max/311-93-164-41-001000/?qs=sGAEpiMZZMs%2fSh%2fkjph1tvt1%2fmEPT%2fXoN71pDqWYWck%3d
Used this (http://www.mouser.com/ds/2/273/065-259662.pdf) datasheet as a guide.
EDIT: These are the same as VinnyCordeiro's. Stock is at 47 and 183 are on order @mouser.
I actually use these: http://www.mouser.com/Search/ProductDetail.aspx?qs=FG09h9tFCuDdUpubgidmTQ%3d%3d
They have gold contact plating, long leads that poke through the PCB. Yeah, with shipping they come to about 9c each at 10 packs, so I'll probably go with them. Popping them out of the housing is simple enough.
-
I found these:
http://www.mouser.de/ProductDetail/Mill-Max/311-93-164-41-001000/?qs=sGAEpiMZZMs%2fSh%2fkjph1tvt1%2fmEPT%2fXoN71pDqWYWck%3d
Used this (http://www.mouser.com/ds/2/273/065-259662.pdf) datasheet as a guide.
EDIT: These are the same as VinnyCordeiro's. Stock is at 47 and 183 are on order @mouser.
I actually use these: http://www.mouser.com/Search/ProductDetail.aspx?qs=FG09h9tFCuDdUpubgidmTQ%3d%3d
They have gold contact plating, long leads that poke through the PCB. Yeah, with shipping they come to about 9c each at 10 packs, so I'll probably go with them. Popping them out of the housing is simple enough.
The only difference between these two are the materials, I will go with the cheaper one.
-
Edit: Wrong thread lol.
-
Locking, GB thread: https://geekhack.org/index.php?topic=73443.0;topicseen