Author Topic: RAMA M10-A (NOW AVAILABLE)  (Read 78914 times)

0 Members and 1 Guest are viewing this topic.

Offline xondat

  • i'm not a star
  • * Maker
  • Posts: 5366
  • Location: United Kingdom
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #50 on: Tue, 28 March 2017, 15:47:18 »
I need one of these but they are no where to be found!!:/


Sent from my iPhone using Tapatalk

Not shipped yet :(

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #51 on: Tue, 28 March 2017, 20:12:10 »
I need one of these but they are no where to be found!!:/


Sent from my iPhone using Tapatalk

Not shipped yet :(

 :( :( :( :(
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline clasicks

  • Formerly KeyboardUser4
  • Posts: 785
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #52 on: Tue, 11 April 2017, 09:07:54 »
Hi I would like to delete my account.
« Last Edit: Wed, 04 July 2018, 14:55:27 by clasicks »

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #53 on: Tue, 11 April 2017, 09:55:11 »
Rama, i am sad i missed this. Will there be any extras available or will i have to search second hand?

Cheers!


I believe  there will be a round 2 :) Stay tuned!
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline ambalek

  • Posts: 50
  • Location: London, UK
  • Pizza tonight/Threat neutralized
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #54 on: Tue, 11 April 2017, 17:00:44 »
Mine just shipped from Massdrop! I ordered a M10-A with clear switches, so I think it was supposed to be delayed slightly due to issues sourcing the switches.

I'm pretty excited about this, because the CNC and finish looks amazing on the M10-A compared to most macropads/numpads. Except for my M4-A... :)

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #55 on: Wed, 12 April 2017, 00:11:41 »
Mine just shipped from Massdrop! I ordered a M10-A with clear switches, so I think it was supposed to be delayed slightly due to issues sourcing the switches.

I'm pretty excited about this, because the CNC and finish looks amazing on the M10-A compared to most macropads/numpads. Except for my M4-A... :)


Oh man!!! Cannot wait for you to get your hands on it!

By the way, latest configurator can be downloaded here: https://github.com/machineindustries/configurator/releases

Post some pics when you get it :)


Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline ambalek

  • Posts: 50
  • Location: London, UK
  • Pizza tonight/Threat neutralized
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #56 on: Wed, 12 April 2017, 03:20:30 »
Mine just shipped from Massdrop! I ordered a M10-A with clear switches, so I think it was supposed to be delayed slightly due to issues sourcing the switches.

I'm pretty excited about this, because the CNC and finish looks amazing on the M10-A compared to most macropads/numpads. Except for my M4-A... :)


Oh man!!! Cannot wait for you to get your hands on it!

By the way, latest configurator can be downloaded here: https://github.com/machineindustries/configurator/releases

Post some pics when you get it :)

I certainly will, I might even dig out a proper camera instead of using my phone

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #57 on: Wed, 12 April 2017, 20:06:57 »
Mine just shipped from Massdrop! I ordered a M10-A with clear switches, so I think it was supposed to be delayed slightly due to issues sourcing the switches.

I'm pretty excited about this, because the CNC and finish looks amazing on the M10-A compared to most macropads/numpads. Except for my M4-A... :)


Oh man!!! Cannot wait for you to get your hands on it!

By the way, latest configurator can be downloaded here: https://github.com/machineindustries/configurator/releases

Post some pics when you get it :)

I certainly will, I might even dig out a proper camera instead of using my phone
Show Image


Please do!! Cheers
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline xondat

  • i'm not a star
  • * Maker
  • Posts: 5366
  • Location: United Kingdom
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #58 on: Wed, 12 April 2017, 21:31:16 »



Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #59 on: Thu, 13 April 2017, 12:13:20 »
Show Image


Show Image



AWWWWW HELLS YES!
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline TelFiRE

  • Posts: 195
  • Location: Littleton, CO
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #60 on: Fri, 14 April 2017, 02:01:15 »
Was this gorgeous work a one-off good sir or will there be a second run?

Edit: oops sorry I'm impatient, saw your answer a few replies back, can't wait :D

I'm really really hoping to score this and have it next to a M65-A (if I can get ahold of it!) You make gorgeous stuff!!
« Last Edit: Fri, 14 April 2017, 02:27:48 by TelFiRE »
KBD75 GMK Terminal          XD84 DSA Black on GSF + Hana Matcha + Serum

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #61 on: Fri, 14 April 2017, 02:51:59 »
Was this gorgeous work a one-off good sir or will there be a second run?

Edit: oops sorry I'm impatient, saw your answer a few replies back, can't wait :D

I'm really really hoping to score this and have it next to a M65-A (if I can get ahold of it!) You make gorgeous stuff!!

yup yup it's coming back!! stay tuned :)

Thanks so much mate - plenty more to come! :D
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline natbuns

  • Posts: 8
  • Location: Cincinnati,OH
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #62 on: Sun, 16 April 2017, 11:46:33 »
aw ye it finally came. I friggin love it. gonna go play some overwatch with it. :thumb:

Offline TelFiRE

  • Posts: 195
  • Location: Littleton, CO
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #63 on: Sun, 16 April 2017, 15:40:40 »
Duuuuude,
The TMX-INJECTOR looks amazing.. I guess that would replace a :~$ynth and has a built-in box so no need for legos right? I've been wanting to get into cap making, that looks great!

A bit sad to see no Goblin color on these SAs but sweet nonetheless. I'll go for a Moon. I don't suppose there'd be anyway to combine with the Goblin key I also bought? Not really a big deal, but thought I'd ask heh.
« Last Edit: Sun, 16 April 2017, 16:17:41 by TelFiRE »
KBD75 GMK Terminal          XD84 DSA Black on GSF + Hana Matcha + Serum

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #64 on: Mon, 17 April 2017, 07:55:58 »
aw ye it finally came. I friggin love it. gonna go play some overwatch with it. :thumb:


Oh sweet! let me know how it is with OW :D

Duuuuude,
The TMX-INJECTOR looks amazing.. I guess that would replace a :~$ynth and has a built-in box so no need for legos right? I've been wanting to get into cap making, that looks great!

A bit sad to see no Goblin color on these SAs but sweet nonetheless. I'll go for a Moon. I don't suppose there'd be anyway to combine with the Goblin key I also bought? Not really a big deal, but thought I'd ask heh.


Hey cheers man! Yeah, built-in box too :)

Ahh sorry mate, won't be able to combine them since the R3 waves will be shipping much sooner than the SA waves :( You're going to love them though!
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline xondat

  • i'm not a star
  • * Maker
  • Posts: 5366
  • Location: United Kingdom
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #65 on: Tue, 18 April 2017, 08:59:06 »


came as a surprise as i haven't paid customs yet :eek:

quality is nice, there are some machining marks, and i received 8 switches (instead of 10) but otherwise a nice product and i'm happy i joined

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #66 on: Tue, 18 April 2017, 20:46:18 »
Show Image


came as a surprise as i haven't paid customs yet :o

quality is nice, there are some machining marks, and i received 8 switches (instead of 10) but otherwise a nice product and i'm happy i joined

Oh hey!! You got it :) Glad you like it mate!

That's really no good that you received 8 switches instead of 10, contact Massdrop ASAP and they should sort that out for you! :)

Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline libertycannon

  • Posts: 73
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #67 on: Sun, 23 April 2017, 03:09:08 »
Hey rama the top left hex bolt on the bottom doesn't tighten anymore...  The corresponding screw hole on the top piece of the metal housing shed some type of coating and now the threads don't catch the hex bolt when i try and screw it in.  It sounds like i am grinding something when i screw in the other ones and I am really concerned this will happen to them too... What is that and how can I fix this? 

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #68 on: Sun, 23 April 2017, 04:12:38 »
Hey rama the top left hex bolt on the bottom doesn't tighten anymore...  The corresponding screw hole on the top piece of the metal housing shed some type of coating and now the threads don't catch the hex bolt when i try and screw it in.  It sounds like i am grinding something when i screw in the other ones and I am really concerned this will happen to them too... What is that and how can I fix this?


Sounds like their may be beadblast material or something inside the threads - does it feel scratchy? Best to get some compressed air and blast it in to remove the particles
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline libertycannon

  • Posts: 73
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #69 on: Tue, 25 April 2017, 11:19:27 »
thanks for the response! I will get some compressed air in there to clean out the others to prevent what happened to the stripped hole.  Can you tell me the size of the hex bolts or a reference so that i can go buy a longer bolt for the stripped hole? the threads at the bottom are still in tact but with the size of the bottom body piece, the original bolt is not long enough to reach l.

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #70 on: Tue, 25 April 2017, 20:11:01 »
thanks for the response! I will get some compressed air in there to clean out the others to prevent what happened to the stripped hole.  Can you tell me the size of the hex bolts or a reference so that i can go buy a longer bolt for the stripped hole? the threads at the bottom are still in tact but with the size of the bottom body piece, the original bolt is not long enough to reach l.


They're M3! I think you are supplied with M3x8, so anything longer then that should be sweet :) hope that helps!
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline Sissy

  • Posts: 494
  • Location: Australia
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #71 on: Wed, 26 April 2017, 04:02:52 »
Just wanna say mine just arrived, no time to play around with it tonight but unboxed it and it looks perfect

Offline xondat

  • i'm not a star
  • * Maker
  • Posts: 5366
  • Location: United Kingdom
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #72 on: Wed, 26 April 2017, 04:09:22 »
thanks for the response! I will get some compressed air in there to clean out the others to prevent what happened to the stripped hole.  Can you tell me the size of the hex bolts or a reference so that i can go buy a longer bolt for the stripped hole? the threads at the bottom are still in tact but with the size of the bottom body piece, the original bolt is not long enough to reach l.


They're M3! I think you are supplied with M3x8, so anything longer then that should be sweet :) hope that helps!

They're M3? Uhhhhhhh... I thought they were M3.5/M4 as my M3 screws don't work with it.

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #73 on: Wed, 26 April 2017, 07:59:13 »
Just wanna say mine just arrived, no time to play around with it tonight but unboxed it and it looks perfect


Cheers mate!!
thanks for the response! I will get some compressed air in there to clean out the others to prevent what happened to the stripped hole.  Can you tell me the size of the hex bolts or a reference so that i can go buy a longer bolt for the stripped hole? the threads at the bottom are still in tact but with the size of the bottom body piece, the original bolt is not long enough to reach l.


They're M3! I think you are supplied with M3x8, so anything longer then that should be sweet :) hope that helps!

They're M3? Uhhhhhhh... I thought they were M3.5/M4 as my M3 screws don't work with it.
 


100% M3 screws, 0.5MM pitch, guaranteed! Not using DIN screws or something?
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline xondat

  • i'm not a star
  • * Maker
  • Posts: 5366
  • Location: United Kingdom
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #74 on: Wed, 26 April 2017, 08:12:36 »
thanks for the response! I will get some compressed air in there to clean out the others to prevent what happened to the stripped hole.  Can you tell me the size of the hex bolts or a reference so that i can go buy a longer bolt for the stripped hole? the threads at the bottom are still in tact but with the size of the bottom body piece, the original bolt is not long enough to reach l.


They're M3! I think you are supplied with M3x8, so anything longer then that should be sweet :) hope that helps!

They're M3? Uhhhhhhh... I thought they were M3.5/M4 as my M3 screws don't work with it.
 


100% M3 screws, 0.5MM pitch, guaranteed! Not using DIN screws or something?

Hexagon A/F (aka the size of hex key you need) is different, guess I didn't notice before ;D

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #75 on: Wed, 26 April 2017, 08:14:09 »
thanks for the response! I will get some compressed air in there to clean out the others to prevent what happened to the stripped hole.  Can you tell me the size of the hex bolts or a reference so that i can go buy a longer bolt for the stripped hole? the threads at the bottom are still in tact but with the size of the bottom body piece, the original bolt is not long enough to reach l.


They're M3! I think you are supplied with M3x8, so anything longer then that should be sweet :) hope that helps!

They're M3? Uhhhhhhh... I thought they were M3.5/M4 as my M3 screws don't work with it.
 


100% M3 screws, 0.5MM pitch, guaranteed! Not using DIN screws or something?

Hexagon A/F (aka the size of hex key you need) is different, guess I didn't notice before ;D


Ohhh, yeah, different manufacturers may use different head sizes and allen sizes - but thread etc should be the same and it should screw right in :D
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline theasian

  • Posts: 18
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #76 on: Fri, 12 May 2017, 20:45:36 »
hit me with that round 2 Rama!

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #77 on: Sat, 13 May 2017, 08:35:23 »
hit me with that round 2 Rama!


soon soon (TM)
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline GenKaan

  • * Destiny Supporter
  • Posts: 289
  • Location: The Matrix
  • Mer caps, mindre käbbel
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #78 on: Sat, 27 May 2017, 11:54:29 »
Just managed to get my hands on one, looking forward to testing it out once it gets here :)
Looks amazing based on the pictures
|| @Home:: Shine 3 TKL (Mx Red / Deep Space)  || @Work:: G2Pro (Mx Clear / Dye Sub PBT) ||
@Reserve:: HHKB (Topre 45g / Mixed PBT) // Das v3 (Mx Brown / Blank PBT)

Offline Arallu

  • Posts: 230
  • Location: USA
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #79 on: Sun, 11 June 2017, 18:23:35 »
hit me with that round 2 Rama!

soon soon (TM)

Wink wink nudge nudge!  :cool:

Offline rabbitfire

  • Posts: 232
  • Location: Rabbitfire102
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #80 on: Sun, 25 June 2017, 08:31:47 »

Offline Troif

  • Posts: 112
  • Location: Barcelona
  • Carpe Diem!!!
    • Daniel Ferrer
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #81 on: Mon, 26 June 2017, 11:37:03 »
I suppose round 2 will have the same pcb as the round1 or there are improvements? (please! let us know for us looking on second hand markets... or wait until r2!)
--
Filco TKL Ninja Blues / CODE Greens / Pok3r Clears / HHKBpro2 / RF 87U 55g / Novatouch TKL / KC60 Clears / SSK and also regular Model M

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #82 on: Tue, 27 June 2017, 00:21:07 »
I suppose round 2 will have the same pcb as the round1 or there are improvements? (please! let us know for us looking on second hand markets... or wait until r2!)


Round 2 will most likely be a new PCB :)
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline Arallu

  • Posts: 230
  • Location: USA
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #83 on: Fri, 04 August 2017, 20:50:35 »
...
« Last Edit: Tue, 03 July 2018, 10:10:47 by Arallu »