Author Topic: This is the End Sale/Auction Ended (Read 13497 times)

Pacifist · « **Reply #50 on:** Wed, 30 October 2013, 23:14:01 »

Canged $20 tentative to $17 sure. About how much will shipping to USA cost?

Turkishrambo · « **Reply #51 on:** Wed, 30 October 2013, 23:18:21 »

Quote from: Pacifist on Wed, 30 October 2013, 23:14:01

Canged $20 tentative to $17 sure. About how much will shipping to USA cost?

It would fit in a normal envelope so not much.

MKULTRA · « **Reply #52 on:** Thu, 31 October 2013, 09:03:36 »

Turkish I think you should provide better pictures of that clear acrylic case from ali's group buy. I know they didn't have the best QC and some people complained you could see air bubbles, glue, and hair between the layers of clear acrylic.

JulienC · « **Reply #53 on:** Thu, 31 October 2013, 12:33:22 »

60$ for GH60 PCB
90$ for HHKB case

Turkishrambo · « **Reply #54 on:** Thu, 31 October 2013, 12:51:49 »

Quote from: MKULTRA on Thu, 31 October 2013, 09:03:36

Turkish I think you should provide better pictures of that clear acrylic case from ali's group buy. I know they didn't have the best QC and some people complained you could see air bubbles, glue, and hair between the layers of clear acrylic.

Will take more detailed pictures when i get home, thanks

Turkishrambo · « **Reply #55 on:** Thu, 31 October 2013, 17:48:23 »

5 hours remaining!

HendyZone · « **Reply #56 on:** Thu, 31 October 2013, 19:59:42 »

Quote from: Turkishrambo on Wed, 30 October 2013, 20:15:29

updated. also mickey pmed me saying he canceled his bid

so the lead bid still mine with 75$ right ?

Turkishrambo · « **Reply #57 on:** Thu, 31 October 2013, 20:10:19 »

Quote from: HendyZone on Thu, 31 October 2013, 19:59:42

Quote from: Turkishrambo on Wed, 30 October 2013, 20:15:29
updated. also mickey pmed me saying he canceled his bid

so the lead bid still mine with 75$ right ?

He rebid. See posts after

BliTzKiN · « **Reply #58 on:** Thu, 31 October 2013, 20:12:21 »

95 on the HHKB case
20 on the switch tools

Pacifist · « **Reply #59 on:** Thu, 31 October 2013, 20:18:28 »

What the hell, I'll be opening at least 31 switches, $21 on switch tool

HendyZone · « **Reply #60 on:** Thu, 31 October 2013, 20:19:44 »

Ouhh okay then, missed that
90$ for Cream Cheese and Green w/ Tsangan and numpad

Turkishrambo · « **Reply #61 on:** Thu, 31 October 2013, 20:22:54 »

Quote from: Pacifist on Thu, 31 October 2013, 20:18:28

What the hell, I'll be opening at least 31 switches, $21 on switch tool

Just so you know the tool is better for switches already soldered to a board. Just use something pointed and you can easily open the switch from the bottom without hurting it

Mikey Mo · « **Reply #62 on:** Thu, 31 October 2013, 20:23:44 »

95$ for Cream Cheese and Green w/ Tsangan and numpad

Turkishrambo · « **Reply #63 on:** Thu, 31 October 2013, 20:26:39 »

updated.

Put pics of the bottom. Might be a bit dusty, ill clean it before sending out of corse

JulienC · « **Reply #64 on:** Thu, 31 October 2013, 20:32:09 »

105$ for the HHKB case

Pacifist · « **Reply #65 on:** Thu, 31 October 2013, 21:24:09 »

Quote from: Turkishrambo on Thu, 31 October 2013, 20:22:54

Quote from: Pacifist on Thu, 31 October 2013, 20:18:28
What the hell, I'll be opening at least 31 switches, $21 on switch tool
Just so you know the tool is better for switches already soldered to a board. Just use something pointed and you can easily open the switch from the bottom without hurting it

How so?

MKULTRA · « **Reply #66 on:** Thu, 31 October 2013, 21:27:03 »

Quote from: Pacifist on Thu, 31 October 2013, 21:24:09

Quote from: Turkishrambo on Thu, 31 October 2013, 20:22:54
Quote from: Pacifist on Thu, 31 October 2013, 20:18:28
What the hell, I'll be opening at least 31 switches, $21 on switch tool
Just so you know the tool is better for switches already soldered to a board. Just use something pointed and you can easily open the switch from the bottom without hurting it

How so?

For the switch tool the switch needs to be held in place by something. Doesn't really work well when its just sitting on the table. It is really for switches with the modified plates. I use a screwdriver for non mounted switches.

BliTzKiN · « **Reply #67 on:** Thu, 31 October 2013, 22:13:54 »

Quote from: MKULTRA on Thu, 31 October 2013, 21:27:03

Quote from: Pacifist on Thu, 31 October 2013, 21:24:09
Quote from: Turkishrambo on Thu, 31 October 2013, 20:22:54
Quote from: Pacifist on Thu, 31 October 2013, 20:18:28
What the hell, I'll be opening at least 31 switches, $21 on switch tool
Just so you know the tool is better for switches already soldered to a board. Just use something pointed and you can easily open the switch from the bottom without hurting it

How so?
For the switch tool the switch needs to be held in place by something. Doesn't really work well when its just sitting on the table. It is really for switches with the modified plates. I use a screwdriver for non mounted switches.

I too use a screwdriver, the switch tool only really comes in handy if you have the custom plates that offer the ability to open without having to desolder.

You can have it if you still need it, otherwise I would really want to get a bid on it

shawn24 · « **Reply #68 on:** Thu, 31 October 2013, 22:34:59 »

$55 for 86 Cherry MX Dark Gray (Linear)+ a few Cherry MX Green

Pacifist · « **Reply #69 on:** Thu, 31 October 2013, 22:59:07 »

Quote from: BliTzKiN on Thu, 31 October 2013, 22:13:54

Quote from: MKULTRA on Thu, 31 October 2013, 21:27:03
Quote from: Pacifist on Thu, 31 October 2013, 21:24:09
Quote from: Turkishrambo on Thu, 31 October 2013, 20:22:54
Quote from: Pacifist on Thu, 31 October 2013, 20:18:28
What the hell, I'll be opening at least 31 switches, $21 on switch tool
Just so you know the tool is better for switches already soldered to a board. Just use something pointed and you can easily open the switch from the bottom without hurting it

How so?
For the switch tool the switch needs to be held in place by something. Doesn't really work well when its just sitting on the table. It is really for switches with the modified plates. I use a screwdriver for non mounted switches.

I too use a screwdriver, the switch tool only really comes in handy if you have the custom plates that offer the ability to open without having to desolder.

You can have it if you still need it, otherwise I would really want to get a bid on it

Take it, I won't outbid you.

BliTzKiN · « **Reply #70 on:** Thu, 31 October 2013, 22:59:52 »

22 on the tools

Turkishrambo · « **Reply #71 on:** Thu, 31 October 2013, 23:04:57 »

Thanks everyone,

Im tired and going to bed.

Will be sending out PM's sometime tomorrow for paypal information aswell your final total.

Once i have your info i will send an invoice.

RickyJ · « **Reply #72 on:** Fri, 01 November 2013, 01:24:50 »

I'll bid the $50 for the acrylic Poker-layout GH60 case.

Turkishrambo · « **Reply #73 on:** Fri, 01 November 2013, 15:59:09 »

I am at work until 8 pm. Please be patient about invoices for ppl messaging me.

Turkishrambo · « **Reply #74 on:** Fri, 01 November 2013, 19:43:46 »

PM's sent out.

Please get back to me asap.

People asking about shipping with ontario. Usually takes only 2 days. Dont worry about paying extra for express delivery and such.

Ideally i would like to send out all items at once on Monday.

Thanks,

Marc

Turkishrambo · « **Reply #75 on:** Sat, 02 November 2013, 17:50:59 »

Went to post office after work today. Website says open until 6, but only the pharmacy was open still.

Sorry to anyones orders i was going to send out today

They will be sent out tomorrow, thanks for understanding.

Turkishrambo · « **Reply #76 on:** Fri, 15 November 2013, 22:51:14 »

Just an update

LZ-GH has been received by new owner, i wont say who unless they want to say.

Everything has been sent out except for

PCB : JulienC
PCB + switch tool : Blitz
ansi 125 phantom plate ***shipping address has been changed to buyer and ill be paying extra shipping charge

Thank you everyone and for your patience, enjoy your stuff

News:

Author Topic: This is the End Sale/Auction ****Ended**** (Read 13497 times)

Author Topic: This is the End Sale/Auction Ended (Read 13497 times)