« previous next »
Pages:  [1]     Go Down

Author Topic: [IC] 6key Macropad  (Read 6252 times)

0 Members and 1 Guest are viewing this topic.

Offline uqer1244

  • Thread Starter
  • Posts: 6
[IC] 6key Macropad
« on: Mon, 25 May 2020, 07:42:58 »

E-white


Some Silver


Just Gray

At first, I made this model to 3D print and wiring my own.

1. This model is for 3D printing.
2. I have testing model again and again by using 3D printer.
3. I want to make this to aluminum, but I think that's out of my control.
4. At first i think i just glue those parts but It's not hard enough to use....I need another way to attach those parts.

5. Using ATMega32u4 arduino (with QMK or other keymapping programs) and custom designed PCB.








« Last Edit: Mon, 01 June 2020, 08:04:22 by uqer1244 »
Logged

Offline consumer

  • Posts: 68
Re: [IC] 6key Macropad
« Reply #1 on: Mon, 25 May 2020, 08:43:02 »
Count me in
Logged

Offline SxM Designs

  • * Esteemed Elder
  • Posts: 1061
  • Location: Germany
  • https://sxmdesigns.com
    • Website
Re: [IC] 6key Macropad
« Reply #2 on: Mon, 25 May 2020, 08:44:46 »
How about 4 screws going through the plate from the bottom so it cant be seen?
Logged

Offline uqer1244

  • Thread Starter
  • Posts: 6
Re: [IC] 6key Macropad
« Reply #3 on: Mon, 25 May 2020, 08:53:02 »
Quote from: sayantanroy47 on Mon, 25 May 2020, 08:44:46
How about 4 screws going through the plate from the bottom so it cant be seen?

4 screws start to bottom and go through plate and the upper?...Thanks! I'd try it
Logged

Offline yui_

  • Posts: 167
  • Location: UK
Re: [IC] 6key Macropad
« Reply #4 on: Mon, 25 May 2020, 11:07:02 »
any details on pcb/connector/firmware? looks interesting, glwic.
Logged

Offline Ensaum

  • Posts: 447
Re: [IC] 6key Macropad
« Reply #5 on: Mon, 25 May 2020, 11:11:11 »
Love it. I'm in.
Logged

Offline kolec94

  • Posts: 111
Re: [IC] 6key Macropad
« Reply #6 on: Mon, 25 May 2020, 11:12:16 »
What’s the controller going to be?
I’m in


Sent from my iPhone using Tapatalk
Logged

kbparadise v60 blues

Offline uqer1244

  • Thread Starter
  • Posts: 6
Re: [IC] 6key Macropad
« Reply #7 on: Mon, 25 May 2020, 17:40:26 »
Quote from: jorj_mk on Mon, 25 May 2020, 11:07:02
any details on pcb/connector/firmware? looks interesting, glwic.
I think about any ATMega32u4(with QMK on)controller that usually used in wiring, custom kbdlayout.

If i could, I want to design own PCBs.
Logged

Offline tavidayo

  • Posts: 3
  • I see you okay?
Re: [IC] 6key Macropad
« Reply #8 on: Mon, 25 May 2020, 21:30:58 »
This looks great! Depending on pricing I'm in.
Logged

Offline sohju

  • Posts: 20
Re: [IC] 6key Macropad
« Reply #9 on: Mon, 25 May 2020, 21:46:03 »
+1  for me. This looks rad!
Logged

Offline amarotea

  • Posts: 22
Re: [IC] 6key Macropad
« Reply #10 on: Mon, 25 May 2020, 22:55:27 »
oh you brought it to GH. Nice. I want one
Logged

Offline enjoidis

  • Posts: 28
Re: [IC] 6key Macropad
« Reply #11 on: Tue, 26 May 2020, 01:11:06 »
Looks awesome! I'd be down for this if you sort out the "keep it together without glue" issue as well as getting a PCB. Not everyone have the want to hand wire, even if it is for a 6 key macro. It does look pretty sweet though, I'll keep checking back to see the progress if you decide to take it further.  :thumb:
Logged

Offline hottrout

  • Posts: 1487
  • Location: Norn Iron
  • I'd Hit Dat Key
Re: [IC] 6key Macropad
« Reply #12 on: Tue, 26 May 2020, 02:41:15 »
This is pointless, small, cute and probably expensive.  Where can I get one?
Logged
Current Daily Driver : Virgo - Ultramarine - Standard Lube  |  WTB : Topre Realforce Hi-Pro, please PM me if you have one for sale.

Systems -
More
Work |i9-7940x@4.8ghz|32GB(3600)|STRIX-RTX3090Ti|Bespoke Water, 360m Rad|X299 Prime Deluxe|EK x299 Monoblock|Optane 900p|2x1TB 960 Pro|2x10TB Helium|Dell U3415W + Dell UP2116Q
Home |i9-13900ks|32GB(7300)|Rog RTX 4090|Asus Z790 Rog Maximus Hero|Torrent Air|2TB 990 Pro|2TB 990 Pro|Dell AW3423DW QOLED|NEC MultiSync|Drobo16TB
Mining |i5-7500|16GB(2400)|H110 Pro BTC+|8x1080Ti|2x1650Watt PSU

Plus 40 years of collecting retro computers, consoles, games, peripherals, mainframes and mini's as well as their software, keyboards, games and manuals. 100's of systems including every Amiga model made
  Keyboards -
More
IBM 3101 | IBM 3276 | IBM 5150 | IBM ModelM | Dictaphone Dual Display | Vintage Cherrys (1982 onwards, just about all of them) | Commodore (all of them) | Nixdorf | Siemens | ICL | Apple (all of them) | Filco Majistouch | KBDFans 5degree - Chocolate | Rama M6-B - Moon | CA66 Silver | ClueBoard Graphite/PC | Varmilo VA69M Silver | E7-V1 SE Yellow | Rama U-80 Space Grey | VN66 Navy | BOCC Frosted Polycarbonate | Rama M10-C Midnight | FLX Virgo Teal & Black | Rama M60-A LYN Kuro | Space65 CyberVoyager WhiteGold | Space65 CyberVoyager Terminal | Hyper 7 | Clarabelle Sandblasted Polycarbonate | Elongate Mini 1800 Blue | Petrichor 1800 Red | Vulcan Maja Ergo Green | Think6.5v2 RoboCop | Jacky Bear 65% E-White | Sakabato CB87 TKL Champagne | KCK KY-01 Aquamarine | Jae J-01 F&F E-White & Copper | S7.7 E-White | The Adélie Blue | NIX OxalyS80 LE Dark Polycarbonate | Mesa TKL E-White | Smith & Rune IRON180 Graen/Brass | Skog Reboot Desert | CU7 Black | ROTR Silver & Copper | RAMA Kara Soya | Grid 650 E-White | SIX5 LE Aluminium & Gold | OwLab Voice65 Grey | BOX 75 Black Stainless Steel | Onyx E-White | Ikki68 BT Charcoal | Smith & Rune Iron 165 Graphite & Stainless Steel | Epoch 80% Black | RAMA Thermal SEQ2 Kuro | Paper Crane Gerald65 SE PC & CF | CB1800 ZANBATO | GLiTCH | Eclipse Grey & SS | TGR Tomo Silver | Mountain Ergo Black | Keebwerk NASU Black/Red | Phase One 65 Grey | Command TKL Fire | Chalice Frosted | VIENDI 8L Shadow | | Vulcan Maja PC | Glove 80 | Matrix 8XV 3.0 Starry Night | Sagittarius Grey Lilac | AKB OGR & Numpad Dolch | Type K Black

Offline uqer1244

  • Thread Starter
  • Posts: 6
Re: [IC] 6key Macropad
« Reply #13 on: Tue, 26 May 2020, 07:46:00 »
Quote from: enjoidis on Tue, 26 May 2020, 01:11:06
Looks awesome! I'd be down for this if you sort out the "keep it together without glue" issue as well as getting a PCB. Not everyone have the want to hand wire, even if it is for a 6 key macro. It does look pretty sweet though, I'll keep checking back to see the progress if you decide to take it further.  :thumb:

Thanks!
I need to design PCB and I am studying about it
As possible, I think about Arduino controller with bluetooth module (to use it wireless)
Logged

Offline daftswanson

  • Posts: 1
  • Location: USA
Re: [IC] 6key Macropad
« Reply #14 on: Tue, 26 May 2020, 10:40:24 »
Would absolutely be interested in this!
Logged

Offline youreyesonly

  • Posts: 29
Re: [IC] 6key Macropad
« Reply #15 on: Tue, 26 May 2020, 17:00:49 »
Quote from: hottrout on Tue, 26 May 2020, 02:41:15
This is pointless, small, cute and probably expensive.  Where can I get one?

ditto
Logged

Offline enjoidis

  • Posts: 28
Re: [IC] 6key Macropad
« Reply #16 on: Tue, 26 May 2020, 23:42:30 »
Quote from: uqer1244 on Tue, 26 May 2020, 07:46:00
Quote from: enjoidis on Tue, 26 May 2020, 01:11:06
Looks awesome! I'd be down for this if you sort out the "keep it together without glue" issue as well as getting a PCB. Not everyone have the want to hand wire, even if it is for a 6 key macro. It does look pretty sweet though, I'll keep checking back to see the progress if you decide to take it further.  :thumb:

Thanks!
I need to design PCB and I am studying about it
As possible, I think about Arduino controller with bluetooth module (to use it wireless)

Yeah, that would be pretty awesome having a wireless macro! I don't know if anyone has tried that before, none that I've seen before anyways... You'd have to sort out a battery option then, but I'm sure there are plenty of cell phone batteries that could work in a small form factor like that. I'd most likely see what's out there and try and work the "attaching everything together" situation around that. In my head, you might be about to attach everything with just one screw on left side. PM me if you'd like me to draw up my idea, I'm a graphic designer so it shouldn't be a big deal.
Logged

Offline Dyto69

  • Posts: 95
  • Location: Germany
  • 420 blaze it but dont forget 69
Re: [IC] 6key Macropad
« Reply #17 on: Wed, 27 May 2020, 07:14:37 »
Oh yes i like it. Im searching for a nice Macropad a while now but i dont wanna spend to much on this so this could be a nice opportunity!
Logged

Offline uqer1244

  • Thread Starter
  • Posts: 6
Re: [IC] 6key Macropad
« Reply #18 on: Wed, 27 May 2020, 10:08:43 »
Quote from: enjoidis on Tue, 26 May 2020, 23:42:30
Quote from: uqer1244 on Tue, 26 May 2020, 07:46:00
Quote from: enjoidis on Tue, 26 May 2020, 01:11:06
Looks awesome! I'd be down for this if you sort out the "keep it together without glue" issue as well as getting a PCB. Not everyone have the want to hand wire, even if it is for a 6 key macro. It does look pretty sweet though, I'll keep checking back to see the progress if you decide to take it further.  :thumb:

Thanks!
I need to design PCB and I am studying about it
As possible, I think about Arduino controller with bluetooth module (to use it wireless)

Yeah, that would be pretty awesome having a wireless macro! I don't know if anyone has tried that before, none that I've seen before anyways... You'd have to sort out a battery option then, but I'm sure there are plenty of cell phone batteries that could work in a small form factor like that. I'd most likely see what's out there and try and work the "attaching everything together" situation around that. In my head, you might be about to attach everything with just one screw on left side. PM me if you'd like me to draw up my idea, I'm a graphic designer so it shouldn't be a big deal.

Next week, I'll receive the 3d printed sample and 'll think about that problems....
Also I need to re-design it to add the solution of attachment problem
Thanks for your advices and attentions...
Logged

Offline riterdando

  • Posts: 51
  • Location: Germany
Re: [IC] 6key Macropad
« Reply #19 on: Wed, 27 May 2020, 15:21:13 »
Very interesting. Looking forward to new updates.
Logged

Offline CrlaoSvloadr

  • Posts: 50
  • Location: Canada
Re: [IC] 6key Macropad
« Reply #20 on: Fri, 29 May 2020, 16:13:10 »
Wonderful idea, and an even better design- hoping for more updates on this!
Logged

Pages:  [1]     Go Up
« previous next »