geekhack

geekhack Community => Keyboard Keycaps => Topic started by: Dyaems on Tue, 01 November 2016, 23:34:29

Title: Keyset that Supports JIS/Minila Keyboards
Post by: Dyaems on Tue, 01 November 2016, 23:34:29
Besides EnjoyPBT Valentine, are there any other keysets that supports the above keyboards? Or any other keysets that has the following keys included: 2u R1 Shift, 1u  R1 Shift, 1u R1 novelties maybe?, R3 Backslash (beside ISO enter), 1u R4 Backspace and Backslash/Delete.

Not sure if I stated the correct rows, but I'd assume it would be R1 R1 R2 R3 R4 R4 from bottom to top.

Blank keys are probably the last resort but I prefer printed keys for now.


Thanks for any suggestions!
Title: Re: Keyset that Supports JIS/Minila Keyboards
Post by: Puddsy on Wed, 02 November 2016, 01:12:50
There's 1 set in IC phase.

Aside from that, you're boned. 3u spacebar ruins everything. SP is the only company that makes them 3rd party.
Title: Re: Keyset that Supports JIS/Minila Keyboards
Post by: LifeIsOnTheWire on Thu, 03 November 2016, 07:13:38
There's 1 set in IC phase.

Aside from that, you're boned. 3u spacebar ruins everything. SP is the only company that makes them 3rd party.

Incorrect.  NPKC makes a 3u spacebar, in PBT too.  It comes in white, so you can dye it any colour you like

https://www.aliexpress.com/item/White-Thick-PBT-Blank-Additional-Keycap-Supplement-Keycap-Special-Keycap-Set-Key-Cap-Set-7u-3u/32645867417.html?spm=2114.01010208.3.1.tbKbol&ws_ab_test=searchweb0_0,searchweb201602_2_10091_10090_10088_10089,searchweb201603_1&btsid=3e61bb9f-8104-40ff-991b-6f905d4cac4d

They manufacture it for their Filco Minila PBT keysets:

https://www.aliexpress.com/item/Black-PBT-blank-mechanical-keyboard-filco-minila-air-thick-PBT-white-side-print-keycap-cherry-mx/32714664659.html?spm=2114.01010208.3.1.pgl2qH&ws_ab_test=searchweb0_0,searchweb201602_2_10091_10090_10088_10089,searchweb201603_1&btsid=2c2f258c-5045-4fc6-9048-6d3a1335a207
Title: Re: Keyset that Supports JIS/Minila Keyboards
Post by: Dyaems on Sat, 05 November 2016, 03:00:14
thanks guys  :thumb: