Post by: ye_cole on Fri, 28 July 2017, 14:21:22
(https://i.imgur.com/sQRcsX7.png)
IF YOU NEED AN EXTRA 2.25u SHIFT PLEASE SEE HERE https://goo.gl/forms/jNgeYRXaVs17heEJ2
Post by: KevlarBear on Fri, 28 July 2017, 15:41:24
Post by: bciamny on Fri, 28 July 2017, 15:57:11
Post by: ye_cole on Fri, 28 July 2017, 16:17:16
Quote
great job with this and all the work you've been doing for your various ic's :)
Thank you! Just wanted to let everybody know here, SA Fortune isn't cancelled, it's going to be coming after this. I wanted to make my first set have a lot of compatibility, so I'm running this first, so, like molds and such. Yeah.
Post by: Cods on Sat, 29 July 2017, 17:51:38
Post by: zabuza1997 on Sun, 30 July 2017, 17:02:33
Post by: Oblotzky on Mon, 31 July 2017, 02:42:22
Post by: ye_cole on Mon, 31 July 2017, 12:25:01
Quote
Where did the layout image go? And 180$ at 200 units? Bruh, did MaxKeys already overtake SP in pricing? I don't see 200 people buying an inferior product at more than what a rerun on Massdrop would cost, and the short lead time won't save that.
Sorry about that (frankly, rather insane) pricing. I'm pretty much doing this (nearly) at cost, and MOQ is actually 500 units. I was splitting the total amount by around 200, 250, and so on, and then using that as the price. I assumed this was an easier way to hit MOQ instead of saying that the MOQ is 500, but it'll cost around 80 dollars. Either way, it ends up with it being the same at 500 MOQ. You're right about the pricing though, that is sure to put many people off. I've updated it to start at 300.
Post by: Atredl on Mon, 31 July 2017, 15:47:26
Um yeah, but say you only sell 350. Unlikely but let's just go with it for the moment. The way you divided the 500 MOQ price would mean that you would have enough money to buy 500 sets. What would you do with the other 150 sets that were bought?QuoteWhere did the layout image go? And 180$ at 200 units? Bruh, did MaxKeys already overtake SP in pricing? I don't see 200 people buying an inferior product at more than what a rerun on Massdrop would cost, and the short lead time won't save that.
Sorry about that (frankly, rather insane) pricing. I'm pretty much doing this (nearly) at cost, and MOQ is actually 500 units. I was splitting the total amount by around 200, 250, and so on, and then using that as the price. I assumed this was an easier way to hit MOQ instead of saying that the MOQ is 500, but it'll cost around 80 dollars. Either way, it ends up with it being the same at 500 MOQ. You're right about the pricing though, that is sure to put many people off. I've updated it to start at 300.
I'm not saying that you intended to do this maliciously but you can't just divide the total cost of the MOQ to get smaller MOQs. That 300 MOQ you have listed isn't real since you would still have enough money to buy 500 sets.
Post by: Hokabuki on Mon, 31 July 2017, 15:51:20
Sounds like he's buying 500 sets no matter what. But if not enough people join, he just keeps the rest? If 200 people joined at $180 they really should get at least 2 complete sets. Wtf is going on here?Um yeah, but say you only sell 350. Unlikely but let's just go with it for the moment. The way you divided the 500 MOQ price would mean that you would have enough money to buy 500 sets. What would you do with the other 150 sets that were bought?QuoteWhere did the layout image go? And 180$ at 200 units? Bruh, did MaxKeys already overtake SP in pricing? I don't see 200 people buying an inferior product at more than what a rerun on Massdrop would cost, and the short lead time won't save that.
Sorry about that (frankly, rather insane) pricing. I'm pretty much doing this (nearly) at cost, and MOQ is actually 500 units. I was splitting the total amount by around 200, 250, and so on, and then using that as the price. I assumed this was an easier way to hit MOQ instead of saying that the MOQ is 500, but it'll cost around 80 dollars. Either way, it ends up with it being the same at 500 MOQ. You're right about the pricing though, that is sure to put many people off. I've updated it to start at 300.
I'm not saying that you intended to do this maliciously but you can't just divide the total cost of the MOQ to get smaller MOQs. That 300 MOQ you have listed isn't real since you would still have enough money to buy 500 sets.
Post by: ye_cole on Tue, 01 August 2017, 01:20:09
Quote
Um yeah, but say you only sell 350. Unlikely but let's just go with it for the moment. The way you divided the 500 MOQ price would mean that you would have enough money to buy 500 sets. What would you do with the other 150 sets that were bought?
Hey man! This whole 500 total is mostly derived from me being a dumbass. Basically, I only asked maxkeys for the 500 MOQ quote, and I was using that as a base. However, the 200 MOQ quote should probably be more accurate. It's pretty late ATM, but I'll ask them for a new quote for 200 MOQ in the morning. This should make the prices cheaper. In short, I'm not going to be getting 150 extra sets. That would be ludicrous. This situation was caused by a logical error on my part (i'm a dumbass), and I'm not trying to rip off the community.
Quote
Sounds like he's buying 500 sets no matter what. But if not enough people join, he just keeps the rest? If 200 people joined at $180 they really should get at least 2 complete sets. Wtf is going on here?
Actually, just asked for the 500 quote and was dividing that price to get approx price points. Didn't realize how that came off, I apologize. I'll get some updated quotes at a later date for 200 MOQ. Have a nice day!
Post by: Atredl on Tue, 01 August 2017, 01:43:22
That's quite an error to make..QuoteUm yeah, but say you only sell 350. Unlikely but let's just go with it for the moment. The way you divided the 500 MOQ price would mean that you would have enough money to buy 500 sets. What would you do with the other 150 sets that were bought?
Hey man! This whole 500 total is mostly derived from me being a dumbass. Basically, I only asked maxkeys for the 500 MOQ quote, and I was using that as a base. However, the 200 MOQ quote should probably be more accurate. It's pretty late ATM, but I'll ask them for a new quote for 200 MOQ in the morning. This should make the prices cheaper. In short, I'm not going to be getting 150 extra sets. That would be ludicrous. This situation was caused by a logical error on my part (i'm a dumbass), and I'm not trying to rip off the community.
Post by: zabuza1997 on Wed, 02 August 2017, 17:37:38
Sent from my MI MAX using Tapatalk
Post by: Oblotzky on Wed, 02 August 2017, 17:39:38
Post by: amnesia0287 on Wed, 02 August 2017, 17:45:21
Could be cheaper if you removed all those duplicate keys
I'm pretty sure when he got the render they were insisting on selling their standard keys in addition to the ones with fixed legends. That may have changed since I think Lime is fixing them now>?
Post by: breusch91 on Wed, 02 August 2017, 22:45:19
Could be cheaper if you removed all those duplicate keys
I'm pretty sure when he got the render they were insisting on selling their standard keys in addition to the ones with fixed legends. That may have changed since I think Lime is fixing them now>?
Believe this was correct. Maxkeys was making him buy the original messed up keys as well, just getting the fixed keys instead wasnt an option according to maxkeys
Post by: Oblotzky on Wed, 02 August 2017, 23:06:31
Could be cheaper if you removed all those duplicate keys
I'm pretty sure when he got the render they were insisting on selling their standard keys in addition to the ones with fixed legends. That may have changed since I think Lime is fixing them now>?
Believe this was correct. Maxkeys was making him buy the original messed up keys as well, just getting the fixed keys instead wasnt an option according to maxkeys
What a joke (if true)
Post by: simonyunhe on Wed, 02 August 2017, 23:57:29
Post by: SteezeTrain on Thu, 03 August 2017, 00:02:52
Post by: Calza on Thu, 03 August 2017, 02:07:20
Post by: ye_cole on Thu, 03 August 2017, 19:53:40
Update 3: Removed pricing, please wait for further information on that. Also, got some things worked out with maxkeys, and they gave me some good news about the molds. If everything goes to plan, GB will start 9:00 AM PST on Sept 2, and will run for about a month or so to allow everyone to get in. Hype train engaged? Maybe not? I'm not sure. The GB date is not final, and is subject to change. With that being said, yay! I'm rather exited.
Post by: Jubileus on Sat, 05 August 2017, 08:37:07
Post by: ye_cole on Mon, 07 August 2017, 19:12:36
Quote
Will you allow maxkey to sell it directly also like Miami nights and Lime? Shipping for us in Asia would be better that way. :D
Unfortunately, no. Sorry! I don't want to deal with drop shipping. Also, if anything goes wrong, I'd like to have it be my fault rather than the fault of another company. I apologize for the hassle (and somewhat longer wait).
Also, after seeing SA Lime's mold fixes (Kingnestea and Jchan, you're doing god's work), I changed the kit a little by removing most duplicate keys. Also, just to make a list, this set is compatible with the following layouts (let me know if I miss any): 40%, 60%, 65%, TKL, 75%, HHKB, 96 Key, Full Sized, and Leopold fc660c. Pricing should be lowered because of the kit fixes they're doing, but I'm still waiting on pricing. Due to the fixes they're doing, Maxkeys won't be taking any orders until October. I plan to have the GB finished around a week before they start taking orders; this is to be able to have the set be made as soon as possible.
Kit Render!
(http://i.imgur.com/v3vxYfH.png)
Post by: thesiscamper on Mon, 07 August 2017, 21:23:12
Post by: kingnestea on Mon, 07 August 2017, 21:59:42
I'm talking directly to Maxkey too, and they told me that jchan indeed helped with some fixes but that most of it is their own initiative. Not to take away anything from jchan/kingnestea but people need to know that Maxkey isn't clueless or stubborn, and they want to be the best.
Indeed, they did surprise me when they told me that they are willing to do the fixes, it's just the cost because Maxkey isn't a one man business and they had different visions on that.
I'm glad that we worked something out.
Post by: thesiscamper on Mon, 07 August 2017, 22:03:26
Yes, they're moving quickly and it's a good thing for everybody. I know some people will stick with SP and not buy anything else, but now we actually have a serious alternative for everybody else.I'm talking directly to Maxkey too, and they told me that jchan indeed helped with some fixes but that most of it is their own initiative. Not to take away anything from jchan/kingnestea but people need to know that Maxkey isn't clueless or stubborn, and they want to be the best.
Indeed, they did surprise me when they told me that they are willing to do the fixes, it's just the cost because Maxkey isn't a one man business and they had different visions on that.
I'm glad that we worked something out.
Sorry for derailing the thread.
Post by: kingnestea on Mon, 07 August 2017, 22:07:58
QuoteWill you allow maxkey to sell it directly also like Miami nights and Lime? Shipping for us in Asia would be better that way. :D
Unfortunately, no. Sorry! I don't want to deal with drop shipping. Also, if anything goes wrong, I'd like to have it be my fault rather than the fault of another company. I apologize for the hassle (and somewhat longer wait).
Also, after seeing SA Lime's mold fixes (Kingnestea and Jchan, you're doing god's work), I changed the kit a little by removing most duplicate keys. Also, just to make a list, this set is compatible with the following layouts (let me know if I miss any): 40%, 60%, 65%, TKL, 75%, HHKB, 96 Key, Full Sized, and Leopold fc660c. Pricing should be lowered because of the kit fixes they're doing, but I'm still waiting on pricing. Due to the fixes they're doing, Maxkeys won't be taking any orders until October. I plan to have the GB finished around a week before they start taking orders; this is to be able to have the set be made as soon as possible.
Kit Render!Show Image(http://i.imgur.com/v3vxYfH.png)
Looking at the kit render, I think you should adjust your logic when working with Maxkey.
The best way to work with Maxkey is to use their basic layout and add keys for compatibility rather than starting from what you need.
That'd probably balance pricing and compatibility.
And will be more comfortable for them to do the pricing as well when you put all the extra keys you need beside the basic layout.
Post by: ye_cole on Mon, 07 August 2017, 23:41:27
Quote
I'm talking directly to Maxkey too, and they told me that jchan indeed helped with some fixes but that most of it is their own initiative. Not to take away anything from jchan/kingnestea but people need to know that Maxkey isn't clueless or stubborn, and they want to be the best.
Yeah, I didn't mean to insinuate that they were stubborn/clueless. They emailed me around the time when they told me that a kit update was coming, but they said it was only for esc, backspace, and shift. Didn't know they planned to do everything in one go. I'm quite exited.
Quote
Looking at the kit render, I think you should adjust your logic when working with Maxkey.
The best way to work with Maxkey is to use their basic layout and add keys for compatibility rather than starting from what you need.
That'd probably balance pricing and compatibility.
And will be more comfortable for them to do the pricing as well when you put all the extra keys you need beside the basic layout.
That's what I'm planning on doing when I ask them for a quote. Thank you for the advice, though.
Post by: wylie on Mon, 14 August 2017, 09:59:25
Post by: ye_cole on Mon, 14 August 2017, 19:38:55
Post by: Niomosy on Tue, 15 August 2017, 19:35:35
Maybe they're just busy enough that they won't bother until then?
Post by: hhkbp2 on Wed, 16 August 2017, 07:36:57
So the fancy Ergodox kit and Colevrak kit and other kits are removed?
Post by: Oblotzky on Wed, 16 August 2017, 07:46:54
Is it the same as the poll in https://www.massdrop.com/vote/Calm-Depths-SA-and-DSA ?
So the fancy Ergodox kit and Colevrak kit and other kits are removed?
The Massdrop poll is connected to https://geekhack.org/index.php?topic=88090.0 - unrelated to this IC as this IC is using MaxKeys as the manufacturer
Post by: hhkbp2 on Wed, 16 August 2017, 08:04:46
Is it the same as the poll in https://www.massdrop.com/vote/Calm-Depths-SA-and-DSA ?
So the fancy Ergodox kit and Colevrak kit and other kits are removed?
The Massdrop poll is connected to https://geekhack.org/index.php?topic=88090.0 - unrelated to this IC as this IC is using MaxKeys as the manufacturer
Aha, I see now. Thanks for the clarification.
Post by: DreLLin on Wed, 16 August 2017, 09:29:32
Post by: Koobaczech on Wed, 16 August 2017, 09:42:53
Post by: ye_cole on Tue, 22 August 2017, 20:20:15
Post by: Hokabuki on Tue, 22 August 2017, 20:22:43
Updated!Does the $90 price require an MOQ?
Post by: Atredl on Tue, 22 August 2017, 20:26:20
Post by: ye_cole on Tue, 22 August 2017, 23:16:00
Quote
Why are the extra Del, Pg Dn, and End in Row 2? Just want to make sure they don't get made in the wrong profile.
Sorry! Those keys are meant to be in R1, but I never got around to changing the KLE. I'll do that ASAP.
Quote
Does the $90 price require an MOQ?
500.
Post by: Petch on Wed, 23 August 2017, 04:14:20
Hopefully you can get a UK/EU proxy sorted - I recommend Candykeys if they'd be interested.
Post by: lovetree on Wed, 23 August 2017, 06:33:41
QuoteWill you allow maxkey to sell it directly also like Miami nights and Lime? Shipping for us in Asia would be better that way. :D
Unfortunately, no. Sorry! I don't want to deal with drop shipping. Also, if anything goes wrong, I'd like to have it be my fault rather than the fault of another company. I apologize for the hassle (and somewhat longer wait).
Also, after seeing SA Lime's mold fixes (Kingnestea and Jchan, you're doing god's work), I changed the kit a little by removing most duplicate keys. Also, just to make a list, this set is compatible with the following layouts (let me know if I miss any): 40%, 60%, 65%, TKL, 75%, HHKB, 96 Key, Full Sized, and Leopold fc660c. Pricing should be lowered because of the kit fixes they're doing, but I'm still waiting on pricing. Due to the fixes they're doing, Maxkeys won't be taking any orders until October. I plan to have the GB finished around a week before they start taking orders; this is to be able to have the set be made as soon as possible.
Kit Render!Show Image(http://i.imgur.com/v3vxYfH.png)
Is there only one 1u CTRL in bottom line?
Post by: Petch on Wed, 23 August 2017, 06:37:03
(https://i.imgur.com/0UHCY66.png)
SA oblivion has it split across 2 lines. I think that's better than using a smaller font and trying to cram it in
Post by: KeLorean on Wed, 23 August 2017, 06:57:00
Sent from my iPhone using Tapatalk
Post by: BearonicMan on Wed, 23 August 2017, 08:06:56
Post by: zabuza1997 on Wed, 23 August 2017, 18:06:23
Sent from my MI MAX using Tapatalk
Post by: ye_cole on Wed, 23 August 2017, 18:14:20
120 at 200, 110 at 300, and 100 at 400. 90 at 500.
I wanted to be completely transparent, and I'll be updating the OG post to show the new points.
Post by: Zubame on Wed, 23 August 2017, 18:15:17
I wasn't able to find this in the replies/info; is this 112343 or the original 123334 profile?
It's 112343
Post by: ye_cole on Wed, 23 August 2017, 18:17:48
Quote
SA oblivion has it split across 2 lines. I think that's better than using a smaller font and trying to cram it in
You make a great point. I'm not digging how it isn't on one line, but it does look better that way. I'll change it.
Post by: SteezeTrain on Wed, 23 August 2017, 18:25:16
Post by: Atredl on Wed, 23 August 2017, 20:27:29
Post by: lovetree on Wed, 23 August 2017, 23:17:02
Is there only one 1u CTRL key in bottom line while there are two 1u alt keys?
Post by: Petch on Thu, 24 August 2017, 02:57:25
QuoteSA oblivion has it split across 2 lines. I think that's better than using a smaller font and trying to cram it in
You make a great point. I'm not digging how it isn't on one line, but it does look better that way. I'll change it.
Cool, thanks
Is there only one 1u CTRL key in bottom line while there are two 1u alt keys?
I'm not 100% sure what's going on with the extra keys to be honest...
(https://i.imgur.com/Y2EXhCZ.png)
If the row profiles are 112343... shouldn't these red keys be on R3? And then an extra 1u Fn and Ctrl key for R3?
I'll be honest, I'm not too familiar with SA profile, but isn't there also some extra up arrow key included that matches the bottom row profile? So in this case, an R3 up arrow in additional to the R4 with the base set
I don't mean to be picky, I just want this to be a solid set with no oversights
Post by: ye_cole on Tue, 29 August 2017, 21:09:07
The buy is coming soon™. No joke, however.
I have a to do list before the buy:
* Work out cost (and payment) with maxkeys, and ensure the molds will be produced correctly.
* Send calm depths keys to janglad to color match to pantone colors.
* Work out EU proxy (There will be no asian proxy. I apologise, but you'll have to get your order shipped from the states if you're in asia.)
* Get some samples of the base kit (probably only color samples, but I'll see what I can do to get a full set)
* Figure out when to pay Maxkeys. (They don't take orders until october, trying to get an exact date ATM.
After everything on my checklist is completed, I'll be good to go and start the GB.
Also, kit render! :D
Thanks, /u/janglad!
(http://i.imgur.com/0Z4KoQO.jpg)
Post by: Atredl on Tue, 29 August 2017, 21:27:45
I have another (somewhat small) update.Just wanted to note that your render has 2 blue tilde keys instead of 1 blue and 1 grey.
The buy is coming soon. No joke, however.
I have a to do list before the buy:
* Work out cost (and payment) with maxkeys, and ensure the molds will be produced correctly.
* Send calm depths keys to janglad to color match to pantone colors.
* Work out EU proxy (There will be no asian proxy. I apologise, but you'll have to get your order shipped from the states if you're in asia.)
* Get some samples of the base kit (probably only color samples, but I'll see what I can do to get a full set)
* Figure out when to pay Maxkeys. (They don't take orders until october, trying to get an exact date ATM.
After everything on my checklist is completed, I'll be good to go and start the GB.
Also, kit render! :D
Thanks, /u/janglad!
http://i.imgur.com/0Z4KoQO.jpg (http://i.imgur.com/0Z4KoQO.jpg)
Post by: ye_cole on Tue, 29 August 2017, 22:37:02
Quote
Just wanted to note that your render has 2 blue tilde keys instead of 1 blue and 1 grey.
Note taken. Will update ASAP.
Quote
Do you have an estimate for how long it would take for Maxkeys to produce the set?
I'll ask them about that.
Quote
If the row profiles are 112343... shouldn't these red keys be on R3? And then an extra 1u Fn and Ctrl key for R3?
My bad. Fixed these issues in the render.
Post by: Pepe_Silvia on Wed, 30 August 2017, 00:21:56
Post by: Petch on Wed, 30 August 2017, 02:55:35
I have another (somewhat small) update.
The buy is coming soon™. No joke, however.
I have a to do list before the buy:
* Work out cost (and payment) with maxkeys, and ensure the molds will be produced correctly.
* Send calm depths keys to janglad to color match to pantone colors.
* Work out EU proxy (There will be no asian proxy. I apologise, but you'll have to get your order shipped from the states if you're in asia.)
* Get some samples of the base kit (probably only color samples, but I'll see what I can do to get a full set)
* Figure out when to pay Maxkeys. (They don't take orders until october, trying to get an exact date ATM.
After everything on my checklist is completed, I'll be good to go and start the GB.
Also, kit render! :D
Thanks, /u/janglad!Show Image(http://i.imgur.com/0Z4KoQO.jpg)
Looks good, besides the tilde key already mentioned.
What about an additional Up Arrow key, but in R3 instead of R4? Like I mentioned earlier, this is pretty common for SA in 12343 because it gives people the choice of having the rows match for aesthetics, or a more comfortable up arrow
Post by: Oblotzky on Wed, 30 August 2017, 04:31:01
I have another (somewhat small) update.
The buy is coming soon™. No joke, however.
I have a to do list before the buy:
* Work out cost (and payment) with maxkeys, and ensure the molds will be produced correctly.
* Send calm depths keys to janglad to color match to pantone colors.
* Work out EU proxy (There will be no asian proxy. I apologise, but you'll have to get your order shipped from the states if you're in asia.)
* Get some samples of the base kit (probably only color samples, but I'll see what I can do to get a full set)
* Figure out when to pay Maxkeys. (They don't take orders until october, trying to get an exact date ATM.
After everything on my checklist is completed, I'll be good to go and start the GB.
Also, kit render! :D
Thanks, /u/janglad!Show Image(http://i.imgur.com/0Z4KoQO.jpg)
Looks good, besides the tilde key already mentioned.
What about an additional Up Arrow key, but in R3 instead of R4? Like I mentioned earlier, this is pretty common for SA in 12343 because it gives people the choice of having the rows match for aesthetics, or a more comfortable up arrow
AFAIK not possible due to how MaxKeys has their molds set up: https://www.reddit.com/r/MechanicalKeyboards/comments/6wwzrc/coming_soon/dmbgxyn/
Post by: Petch on Wed, 30 August 2017, 05:01:19
I have another (somewhat small) update.
The buy is coming soon™. No joke, however.
I have a to do list before the buy:
* Work out cost (and payment) with maxkeys, and ensure the molds will be produced correctly.
* Send calm depths keys to janglad to color match to pantone colors.
* Work out EU proxy (There will be no asian proxy. I apologise, but you'll have to get your order shipped from the states if you're in asia.)
* Get some samples of the base kit (probably only color samples, but I'll see what I can do to get a full set)
* Figure out when to pay Maxkeys. (They don't take orders until october, trying to get an exact date ATM.
After everything on my checklist is completed, I'll be good to go and start the GB.
Also, kit render! :D
Thanks, /u/janglad!Show Image(http://i.imgur.com/0Z4KoQO.jpg)
Looks good, besides the tilde key already mentioned.
What about an additional Up Arrow key, but in R3 instead of R4? Like I mentioned earlier, this is pretty common for SA in 12343 because it gives people the choice of having the rows match for aesthetics, or a more comfortable up arrow
AFAIK not possible due to how MaxKeys has their molds set up: https://www.reddit.com/r/MechanicalKeyboards/comments/6wwzrc/coming_soon/dmbgxyn/
They can do countless novelties in R3, but not an arrow?
Post by: dgneo on Wed, 30 August 2017, 06:01:25
I have another (somewhat small) update.
The buy is coming soon™. No joke, however.
I have a to do list before the buy:
* Work out cost (and payment) with maxkeys, and ensure the molds will be produced correctly.
* Send calm depths keys to janglad to color match to pantone colors.
* Work out EU proxy (There will be no asian proxy. I apologise, but you'll have to get your order shipped from the states if you're in asia.)
* Get some samples of the base kit (probably only color samples, but I'll see what I can do to get a full set)
* Figure out when to pay Maxkeys. (They don't take orders until october, trying to get an exact date ATM.
After everything on my checklist is completed, I'll be good to go and start the GB.
Also, kit render! :D
Thanks, /u/janglad!Show Image(http://i.imgur.com/0Z4KoQO.jpg)
Looks good, besides the tilde key already mentioned.
What about an additional Up Arrow key, but in R3 instead of R4? Like I mentioned earlier, this is pretty common for SA in 12343 because it gives people the choice of having the rows match for aesthetics, or a more comfortable up arrow
AFAIK not possible due to how MaxKeys has their molds set up: https://www.reddit.com/r/MechanicalKeyboards/comments/6wwzrc/coming_soon/dmbgxyn/
They can do countless novelties in R3, but not an arrow?
Perhaps read the link above.
Post by: Petch on Wed, 30 August 2017, 06:03:22
I have another (somewhat small) update.
The buy is coming soon™. No joke, however.
I have a to do list before the buy:
* Work out cost (and payment) with maxkeys, and ensure the molds will be produced correctly.
* Send calm depths keys to janglad to color match to pantone colors.
* Work out EU proxy (There will be no asian proxy. I apologise, but you'll have to get your order shipped from the states if you're in asia.)
* Get some samples of the base kit (probably only color samples, but I'll see what I can do to get a full set)
* Figure out when to pay Maxkeys. (They don't take orders until october, trying to get an exact date ATM.
After everything on my checklist is completed, I'll be good to go and start the GB.
Also, kit render! :D
Thanks, /u/janglad!Show Image(http://i.imgur.com/0Z4KoQO.jpg)
Looks good, besides the tilde key already mentioned.
What about an additional Up Arrow key, but in R3 instead of R4? Like I mentioned earlier, this is pretty common for SA in 12343 because it gives people the choice of having the rows match for aesthetics, or a more comfortable up arrow
AFAIK not possible due to how MaxKeys has their molds set up: https://www.reddit.com/r/MechanicalKeyboards/comments/6wwzrc/coming_soon/dmbgxyn/
They can do countless novelties in R3, but not an arrow?
Perhaps read the link above.
How does anything in that link explain how R3 novelties are fine but an R3 up arrow isn't?
Post by: dgneo on Wed, 30 August 2017, 06:04:25
I have another (somewhat small) update.
The buy is coming soon™. No joke, however.
I have a to do list before the buy:
* Work out cost (and payment) with maxkeys, and ensure the molds will be produced correctly.
* Send calm depths keys to janglad to color match to pantone colors.
* Work out EU proxy (There will be no asian proxy. I apologise, but you'll have to get your order shipped from the states if you're in asia.)
* Get some samples of the base kit (probably only color samples, but I'll see what I can do to get a full set)
* Figure out when to pay Maxkeys. (They don't take orders until october, trying to get an exact date ATM.
After everything on my checklist is completed, I'll be good to go and start the GB.
Also, kit render! :D
Thanks, /u/janglad!Show Image(http://i.imgur.com/0Z4KoQO.jpg)
Looks good, besides the tilde key already mentioned.
What about an additional Up Arrow key, but in R3 instead of R4? Like I mentioned earlier, this is pretty common for SA in 12343 because it gives people the choice of having the rows match for aesthetics, or a more comfortable up arrow
AFAIK not possible due to how MaxKeys has their molds set up: https://www.reddit.com/r/MechanicalKeyboards/comments/6wwzrc/coming_soon/dmbgxyn/
They can do countless novelties in R3, but not an arrow?
Perhaps read the link above.
How does anything in that link explain how R3 novelties are fine but an up arrow isn't?
"Yeah, but MaxKeys has giant molds that press dozens of different keys at a time (e.g. all the alphas at once), so to produce just one more R3 arrow key, they'd produce a lot of waste (aka driving up cost). They are not as flexible as SP which presses multiple of the same key at once."
Post by: Petch on Wed, 30 August 2017, 06:10:13
I have another (somewhat small) update.
The buy is coming soon™. No joke, however.
I have a to do list before the buy:
* Work out cost (and payment) with maxkeys, and ensure the molds will be produced correctly.
* Send calm depths keys to janglad to color match to pantone colors.
* Work out EU proxy (There will be no asian proxy. I apologise, but you'll have to get your order shipped from the states if you're in asia.)
* Get some samples of the base kit (probably only color samples, but I'll see what I can do to get a full set)
* Figure out when to pay Maxkeys. (They don't take orders until october, trying to get an exact date ATM.
After everything on my checklist is completed, I'll be good to go and start the GB.
Also, kit render! :D
Thanks, /u/janglad!Show Image(http://i.imgur.com/0Z4KoQO.jpg)
Looks good, besides the tilde key already mentioned.
What about an additional Up Arrow key, but in R3 instead of R4? Like I mentioned earlier, this is pretty common for SA in 12343 because it gives people the choice of having the rows match for aesthetics, or a more comfortable up arrow
AFAIK not possible due to how MaxKeys has their molds set up: https://www.reddit.com/r/MechanicalKeyboards/comments/6wwzrc/coming_soon/dmbgxyn/
They can do countless novelties in R3, but not an arrow?
Perhaps read the link above.
How does anything in that link explain how R3 novelties are fine but an up arrow isn't?
"Yeah, but MaxKeys has giant molds that press dozens of different keys at a time (e.g. all the alphas at once), so to produce just one more R3 arrow key, they'd produce a lot of waste (aka driving up cost). They are not as flexible as SP which presses multiple of the same key at once."
Okay...? That still doesn't explain any difference between a novelty (done often with maxkey sets) and an up arrow. There are sets with 6+ novelties across multiple rows at low costs still, so I don't think one effective novelty is going to break the bank - if this waste even happens in the first place.
If they have to press X amount of keys at once, say 12 per row, as long as you don't have over 12 novelties there's no extra waste anyway
Post by: Oblotzky on Wed, 30 August 2017, 06:56:27
I have another (somewhat small) update.
The buy is coming soon™. No joke, however.
I have a to do list before the buy:
* Work out cost (and payment) with maxkeys, and ensure the molds will be produced correctly.
* Send calm depths keys to janglad to color match to pantone colors.
* Work out EU proxy (There will be no asian proxy. I apologise, but you'll have to get your order shipped from the states if you're in asia.)
* Get some samples of the base kit (probably only color samples, but I'll see what I can do to get a full set)
* Figure out when to pay Maxkeys. (They don't take orders until october, trying to get an exact date ATM.
After everything on my checklist is completed, I'll be good to go and start the GB.
Also, kit render! :D
Thanks, /u/janglad!Show Image(http://i.imgur.com/0Z4KoQO.jpg)
Looks good, besides the tilde key already mentioned.
What about an additional Up Arrow key, but in R3 instead of R4? Like I mentioned earlier, this is pretty common for SA in 12343 because it gives people the choice of having the rows match for aesthetics, or a more comfortable up arrow
AFAIK not possible due to how MaxKeys has their molds set up: https://www.reddit.com/r/MechanicalKeyboards/comments/6wwzrc/coming_soon/dmbgxyn/
They can do countless novelties in R3, but not an arrow?
Perhaps read the link above.
How does anything in that link explain how R3 novelties are fine but an up arrow isn't?
"Yeah, but MaxKeys has giant molds that press dozens of different keys at a time (e.g. all the alphas at once), so to produce just one more R3 arrow key, they'd produce a lot of waste (aka driving up cost). They are not as flexible as SP which presses multiple of the same key at once."
Okay...? That still doesn't explain any difference between a novelty (done often with maxkey sets) and an up arrow. There are sets with 6+ novelties across multiple rows at low costs still, so I don't think one effective novelty is going to break the bank - if this waste even happens in the first place.
If they have to press X amount of keys at once, say 12 per row, as long as you don't have over 12 novelties there's no extra waste anyway
Sure that would work, but then you'd essentially be starting a novelty mold for that one key, and that costs a lot to make. And in their eyes, arrows already exist.
Post by: Petch on Wed, 30 August 2017, 07:07:40
Sure that would work, but then you'd essentially be starting a novelty mold for that one key, and that costs a lot to make. And in their eyes, arrows already exist.
Just make a duplicate R3 down arrow, no new mold needed ;D
Post by: Oblotzky on Wed, 30 August 2017, 07:30:19
Sure that would work, but then you'd essentially be starting a novelty mold for that one key, and that costs a lot to make. And in their eyes, arrows already exist.
Just make a duplicate R3 down arrow, no new mold needed ;D
And now we have the initial problem that you have now created a bunch of waste because a dozen other keys got printed with it as well. Even with getting three of the desired keys out of each additional press, it's overhead that few would like to see added to their bill.
Post by: Petch on Wed, 30 August 2017, 07:34:51
Sure that would work, but then you'd essentially be starting a novelty mold for that one key, and that costs a lot to make. And in their eyes, arrows already exist.
Just make a duplicate R3 down arrow, no new mold needed ;D
And now we have the initial problem that you have now created a bunch of waste because a dozen other keys got printed with it as well. Even with getting three of the desired keys out of each additional press, it's overhead that few would like to see added to their bill.
Ah, I see what you're saying now - I think. It's either a
Post by: Oblotzky on Wed, 30 August 2017, 07:47:42
Sure that would work, but then you'd essentially be starting a novelty mold for that one key, and that costs a lot to make. And in their eyes, arrows already exist.
Just make a duplicate R3 down arrow, no new mold needed ;D
And now we have the initial problem that you have now created a bunch of waste because a dozen other keys got printed with it as well. Even with getting three of the desired keys out of each additional press, it's overhead that few would like to see added to their bill.
Ah, I see what you're saying now - I think. It's either anewduplicate mold is made as a novelty OR they run they entire keyset again to harvest the R3 arrows?
Correct, well most of an entire new set but in essence yes.
Post by: simonyunhe on Wed, 30 August 2017, 18:28:40
Post by: ye_cole on Wed, 30 August 2017, 21:01:52
Quote
I believe the text arrow will not be a issue since the Lime was already created the mod for it. Remember the up key is R4.
I'm going to use the big arrows (not text based). I'd like to keep this somewhat similar to the OG set, and I also like the look of those arrows over the text based arrows.
Post by: Zubame on Wed, 30 August 2017, 21:12:35
Post by: Petch on Thu, 31 August 2017, 04:31:23
QuoteI believe the text arrow will not be a issue since the Lime was already created the mod for it. Remember the up key is R4.
I'm going to use the big arrows (not text based). I'd like to keep this somewhat similar to the OG set, and I also like the look of those arrows over the text based arrows.
Are you not at all interested in an R3 up arrow? Even if you're not, it would be good to get confirmation on whether or not they can add it without creating much waste because it will likely become a 'standard' key to include in the future, as it is with SP SA sets. The reason you would want an R3 up is because otherwise your arrow cluster has this profile:
(https://i.imgur.com/vOowGx0.png)
Also, I saw your comment on leddit about F1 changing to FI, so it's consistent with the FII... shouldn't this be the other way around, so they're F1 and F11 rather than FI and FII? Why have 2 out of the 12 as numerals?
Post by: Calza on Thu, 31 August 2017, 05:00:01
For us Europeans who grew up on ISO and the different layout, its hard to adapt.
Post by: Zubame on Thu, 31 August 2017, 08:08:51
Also, I saw your comment on leddit about F1 changing to FI, so it's consistent with the FII... shouldn't this be the other way around, so they're F1 and F11 rather than FI and FII? Why have 2 out of the 12 as numerals?
If they did that, they also need to change F10 and F12. The current set has F1 FI0 FII and FI2. It's cheaper to only change FI.
Post by: Petch on Thu, 31 August 2017, 08:27:44
Also, I saw your comment on leddit about F1 changing to FI, so it's consistent with the FII... shouldn't this be the other way around, so they're F1 and F11 rather than FI and FII? Why have 2 out of the 12 as numerals?
If they did that, they also need to change F10 and F12. The current set has F1 FI0 FII and FI2. It's cheaper to only change FI.
I imagine in time they'll only end up changing them all to 1s anyway, oh well
Post by: ye_cole on Thu, 31 August 2017, 09:16:14
Quote
Are you not at all interested in an R3 up arrow? Even if you're not, it would be good to get confirmation on whether or not they can add it without creating much waste because it will likely become a 'standard' key to include in the future, as it is with SP SA sets. The reason you would want an R3 up is because otherwise your arrow cluster has this profile:
I somewhat am. However, I don't want to bump up the price on this any further, as I already said that it was going to be $90 at 200, and it turned out that this price was only doable at 500 units. I apologise, but the R3 arrow isn't going to happen.
Quote
Will this be available on Taobao directly from Maxkeys?
It will not! Sorry. I asked them to do this, and they said they were not able to do this ATM (for me, at least). I apologize.
Post by: ye_cole on Thu, 31 August 2017, 20:16:46
got some samples from OG calm depths. Going to use these to color match.
Post by: suntorywhisky on Fri, 01 September 2017, 06:48:51
Post by: ye_cole on Sat, 02 September 2017, 11:45:58
Quote
Does this have 40% support?
Unfortunately, no. Sorry.
Post by: ye_cole on Mon, 04 September 2017, 21:16:05
Post by: Zubame on Mon, 04 September 2017, 21:20:06
We're getting an asian proxy! Yay! :D
Which one? Taobao?
Post by: ye_cole on Mon, 04 September 2017, 22:39:15
Quote
Which one? Taobao?
Nah, https://monokei.us/.
He's currently running DSA run ATM.
Post by: punksinatra on Tue, 05 September 2017, 05:12:55
QuoteWhich one? Taobao?
Nah, https://monokei.us/.
He's currently running DSA run ATM.
Oh Beamingrobot will proxy.. That works at least the "Asian" proxy is not taobao which is really hard to use for non chinese speaking Asian (not all Asians can speak Chinese)
How does that work? Maxkey will ship it directly to Singapore and then he ships it out within Asia? Or does it have to go to you then back to him?
You will charge when the GB ends right?
Post by: beamingrobot on Tue, 05 September 2017, 23:00:18
Or if I'm in KL at that point, I can drop it off for you ;)
Sent from my iPhone using Tapatalk
Post by: ye_cole on Sat, 09 September 2017, 00:13:08
thanks everybody.
Post by: punksinatra on Sat, 09 September 2017, 00:27:15
We're working on getting Maxkeys to ship directly to us from China to Singapore, and then onwards to the surrounding countries.
Or if I'm in KL at that point, I can drop it off for you ;)
Sent from my iPhone using Tapatalk
If you need help shipping it locally you can drop it off to me or anyone you know here.. much easier to sort for local shipping.. you can holla at me if you want as well
Post by: beamingrobot on Sun, 10 September 2017, 05:13:10
I might be shipping some Malaysian orders from JB, but I'll let ya know if I do head up and we can work out something :thumb:We're working on getting Maxkeys to ship directly to us from China to Singapore, and then onwards to the surrounding countries.
Or if I'm in KL at that point, I can drop it off for you ;)
Sent from my iPhone using Tapatalk
If you need help shipping it locally you can drop it off to me or anyone you know here.. much easier to sort for local shipping.. you can holla at me if you want as well
Post by: avid on Sun, 10 September 2017, 05:22:12
Post by: gaiden on Sun, 10 September 2017, 08:35:12
Sent from my SM-G935F using Tapatalk
Post by: punksinatra on Sun, 10 September 2017, 08:38:50
I might be shipping some Malaysian orders from JB, but I'll let ya know if I do head up and we can work out something :thumb:We're working on getting Maxkeys to ship directly to us from China to Singapore, and then onwards to the surrounding countries.
Or if I'm in KL at that point, I can drop it off for you ;)
Sent from my iPhone using Tapatalk
If you need help shipping it locally you can drop it off to me or anyone you know here.. much easier to sort for local shipping.. you can holla at me if you want as well
I can probably drive down to JB from KL if the date and time is right. Been being nagged by the wife to go back to the outlet store anyway.
But if you will be shipping the sets from JB should not cost more than SGD4 per set but of course you have to factor in your drive/commute crossing the border. Shipping it from JB would also mean next day delivery if you use poslaju
Post by: beamingrobot on Sun, 10 September 2017, 08:41:18
Sounds good, we can PM more about this once we're closer to shipping dates, just drop me a message then and we can work it out :thumb:I might be shipping some Malaysian orders from JB, but I'll let ya know if I do head up and we can work out something :thumb:We're working on getting Maxkeys to ship directly to us from China to Singapore, and then onwards to the surrounding countries.
Or if I'm in KL at that point, I can drop it off for you ;)
Sent from my iPhone using Tapatalk
If you need help shipping it locally you can drop it off to me or anyone you know here.. much easier to sort for local shipping.. you can holla at me if you want as well
I can probably drive down to JB from KL if the date and time is right. Been being nagged by the wife to go back to the outlet store anyway.
Post by: ye_cole on Sun, 10 September 2017, 10:27:10
Quote
Orders is up at candykeys. What is happening with the price of maxkey? 140 Euro? That is equivalent to $170.
That price is a mistake! It isn't supposed to go up yet. Don't worry, it won't be 140 euros. It should be 109 euros with drop points of 10 dollars (est) for every 100 units ordered with a MOQ of 200.
Unfortunately, it's going to be a little more expensive at candykeys to compensate for vat (19%!), hence the higher price than what was promised, but it shouldn't be reaching 140 euros. 109 maximum. 120 USD on monokei.us, also with drop points every 100.
Post by: avid on Sun, 10 September 2017, 10:36:00
Post by: online on Sun, 10 September 2017, 13:08:58
May get the SA version mod extension to cover my minila.
Post by: ye_cole on Sun, 10 September 2017, 13:14:11
Quote
Will Maxkey version mixes nicely with the SA version modifier keys? (if that's happening)
May get the SA version mod extension to cover my minila.
I'm sorry, but I'm not sure what you mean. The row profile for this set is going to be 112343 if that helps.
Post by: a_ak57 on Sun, 10 September 2017, 13:39:39
Post by: euphxenos on Sun, 10 September 2017, 15:38:22
It was on candykeys website, but now i cant find it.
https://www.candykeys.com/product/gb-sa-calm-depths-maxkey/
It looks like it's live now, even though the first post in this thread says it won't be up for a few more hours.
Post by: ye_cole on Sun, 10 September 2017, 15:54:54
Quote
I have to be honest, 120 USD seems excessive given that it's not even being run on the site that automatically adds VAT. Is there a particular reason you decided to use that vendor for US orders? Other Maxkeys buys are around $80, a max of $100 if they have a set of novelties.
You're right. I had a cost breakdown of the set that I posted on reddit earlier, I'll link it here.
Hey! Great question.
The reason the price is increased is because of 3 things:
Custom Molds
Duplicate Keys
Mold opening fees
As you can see, I have around 15-20 custom molds for them to make. Unfortunately, those really jack up the price. Also, they're charging for 7u spacebars and dupe 6u spacebars. They didn't do that when miami nights was being ordered. The tilde and esc keys also add around 1.75 dollars to the set.
Finally, they charge 6000 to start the custom mold making process. After this, you have to pay again to include the custom molds in the set. However, including the molds isn't that expensive, only around 7 dollars extra per set. The 6000 mold opening fee is, though, which is why I have so many drop points, as it is a constant fee that is being split over many orders.
TLDR: mold opening fees cost 6200 USD. this adds like 30 dollars to every set at a MOQ of 200. As you can see, I have drop points in order to compensate for this.
Post by: CandyKeys on Sun, 10 September 2017, 16:47:00
I have to be honest, 120 USD seems excessive given that it's not even being run on the site that automatically adds VAT. Is there a particular reason you decided to use that vendor for US orders? Other Maxkeys buys are around $80, a max of $100 if they have a set of novelties.
One quick Public Announcement. You do not pay VAT if you are not in the EU. You take orders via ye_cole and the prices are different.
Post by: Petch on Sun, 10 September 2017, 16:51:05
I have to be honest, 120 USD seems excessive given that it's not even being run on the site that automatically adds VAT. Is there a particular reason you decided to use that vendor for US orders? Other Maxkeys buys are around $80, a max of $100 if they have a set of novelties.
One quick Public Announcement. You do not pay VAT if you are not in the EU. You take orders via ye_cole and the prices are different.
Post by: Atredl on Sun, 10 September 2017, 17:06:37
I'll be honest, I want this keyset but ye_cole's organization has made me very hesitant to place an order.
Post by: CandyKeys on Sun, 10 September 2017, 17:23:24
There really needs to be a link to the NA order form in the first post. As it's currently written, NA people are directed to order from CandyKeys and then in a small red link hidden on the page is the link to the NA order form. Why not just have ye_cole link the google form on the OP of this post? Seems like a more straightforward way of doing it instead of linking to CandyKeys only to be redirected a different site.
I'll be honest, I want this keyset but ye_cole's organization has made me very hesitant to place an order.
We will get it to the top. Thanks for the suggestion. IF you would like to order in the US, use this form: https://goo.gl/forms/282XqLCveJ5aLW8O2 (https://goo.gl/forms/282XqLCveJ5aLW8O2)
Post by: Duckunderscore on Sun, 10 September 2017, 17:40:23
Post by: KevlarBear on Sun, 10 September 2017, 17:47:10
Post by: ye_cole on Sun, 10 September 2017, 18:12:00
Quote
There really needs to be a link to the NA order form in the first post. As it's currently written, NA people are directed to order from CandyKeys and then in a small red link hidden on the page is the link to the NA order form. Why not just have ye_cole link the google form on the OP of this post? Seems like a more straightforward way of doing it instead of linking to CandyKeys only to be redirected a different site.
I'll be honest, I want this keyset but ye_cole's organization has made me very hesitant to place an order.
Sorry about that. I've added a NA order form to the OP. I'll be updating my reddit posts as well with the NA order form link. This is happening because I've been trying to get the order form working properly on a spreadsheet (it was OG hosted on candykeys, and couldn't easily access info from that form) so I switched to google forms instead, and haven't updated the OP's on anything I've posted yet.
With that being said, thank you for your feedback. I hope you can understand why this happened.
Edit: added order form here for anyone browsing:
https://docs.google.com/forms/d/e/1FAIpQLSfiz8-m7Oh3jmwKtPeUxUzmHeGWFfo7o0yqfJMnTzquTRpw8g/viewform?usp=sf_link
Post by: a_ak57 on Sun, 10 September 2017, 18:35:21
QuoteI have to be honest, 120 USD seems excessive given that it's not even being run on the site that automatically adds VAT. Is there a particular reason you decided to use that vendor for US orders? Other Maxkeys buys are around $80, a max of $100 if they have a set of novelties.
You're right. I had a cost breakdown of the set that I posted on reddit earlier, I'll link it here.
Hey! Great question.
The reason the price is increased is because of 3 things:
Custom Molds
Duplicate Keys
Mold opening fees
As you can see, I have around 15-20 custom molds for them to make. Unfortunately, those really jack up the price. Also, they're charging for 7u spacebars and dupe 6u spacebars. They didn't do that when miami nights was being ordered. The tilde and esc keys also add around 1.75 dollars to the set.
Finally, they charge 6000 to start the custom mold making process. After this, you have to pay again to include the custom molds in the set. However, including the molds isn't that expensive, only around 7 dollars extra per set. The 6000 mold opening fee is, though, which is why I have so many drop points, as it is a constant fee that is being split over many orders.
TLDR: mold opening fees cost 6200 USD. this adds like 30 dollars to every set at a MOQ of 200. As you can see, I have drop points in order to compensate for this.
Thanks for the response, I apparently didn't pay enough attention and didn't realize you were doing a bunch of custom molds, which definitely explains the cost.
Post by: punksinatra on Sun, 10 September 2017, 18:52:29
Post by: ye_cole on Sun, 10 September 2017, 19:11:32
Post by: Pepe_Silvia on Sun, 10 September 2017, 20:05:57
Post by: ye_cole on Sun, 10 September 2017, 20:42:14
Quote
Did samples from Maxkey come back?
I actually just got the color matching done today from 2 keys of the OG calm depths.
I'll order the samples during the GB, probably next saturday or sunday.
Post by: ye_cole on Sun, 10 September 2017, 20:42:35
Post by: infiniti on Sun, 10 September 2017, 22:09:01
Also GB started! Mods pls move. :)
Moved and GLWGB! :thumb:
As a reminder to all, CAVEAT EMPTOR (https://geekhack.org/index.php?topic=36773.0)
Post by: ye_cole on Mon, 11 September 2017, 00:28:32
Signing off, won't answer questions until tomorrow. Thanks everyone! :D
Post by: beamingrobot on Mon, 11 September 2017, 01:19:34
Vietnam:
I'm working with a friend from VNMK to get all orders shipped in bulk to Vietnam, and then distributed locally. That should cut down on costs drastically.
Please hold from ordering at the moment.
Malaysia:
I'm looking to get all Malaysian orders shipped via poslaju one way or another.
Please hold from ordering at the moment.
NZ/AU:
Unfortunately given that you guys are down under I can't find cheaper shipping options then what is listed on the site, please proceed to buy :P
Rest of the Asian countries, GB is a go as usual. Please do not hesitate to contact me via PM on GH, slack, Reddit or email monokei.us (at)gmail(dot)com
Cheers and have a good one :thumb:
Post by: hhkbp2 on Mon, 11 September 2017, 03:51:27
Just a heads-up for those participating in the Asian side of things :cool:
Vietnam:
I'm working with a friend from VNMK to get all orders shipped in bulk to Vietnam, and then distributed locally. That should cut down on costs drastically.
Please hold from ordering at the moment.
Malaysia:
I'm looking to get all Malaysian orders shipped via poslaju one way or another.
Please hold from ordering at the moment.
NZ/AU:
Unfortunately given that you guys are down under I can't find cheaper shipping options then what is listed on the site, please proceed to buy :P
Rest of the Asian countries, GB is a go as usual. Please do not hesitate to contact me via PM on GH, slack, Reddit or email monokei.us (at)gmail(dot)com
Cheers and have a good one :thumb:
Is there anyone working on the Chinese orders? Since maxkeys is in China, It's quite convenient to ship the orders from China directly.
Post by: ye_cole on Mon, 11 September 2017, 10:28:04
Sent from my SAMSUNG-SM-G930A using Tapatalk
Post by: clorex on Mon, 11 September 2017, 17:23:27
Post by: ye_cole on Mon, 11 September 2017, 17:24:21
Sent from my SAMSUNG-SM-G930A using Tapatalk
Post by: punksinatra on Tue, 12 September 2017, 00:20:42
Post by: ye_cole on Tue, 12 September 2017, 00:36:02
Sent from my SAMSUNG-SM-G930A using Tapatalk
Post by: punksinatra on Tue, 12 September 2017, 00:54:49
Waiting for a response from them at the moment. Will update when further information is known.
Sent from my SAMSUNG-SM-G930A using Tapatalk
Thanks
I see here
NA = 79
Candykeys = 88
So is it safe to say only 9 orders so far outside NA during the time it was updated?
Post by: euphxenos on Tue, 12 September 2017, 01:16:44
Waiting for a response from them at the moment. Will update when further information is known.
Sent from my SAMSUNG-SM-G930A using Tapatalk
Thanks
I see here
NA = 79
Candykeys = 88
So is it safe to say only 9 orders so far outside EU during the time it was updated?
I think you're misinterpreting that. I believe that means there are 88 EU orders placed through Candykeys, plus another 79 orders in North America placed through the Google form, for a total of 167 orders so far through those two sources of orders (plus however many have come in through Monokei for Asia).
Post by: punksinatra on Tue, 12 September 2017, 01:18:40
Waiting for a response from them at the moment. Will update when further information is known.
Sent from my SAMSUNG-SM-G930A using Tapatalk
Thanks
I see here
NA = 79
Candykeys = 88
So is it safe to say only 9 orders so far outside NA during the time it was updated?
I think you're misinterpreting that. I believe that means there are 88 EU orders placed through Candykeys, plus another 79 orders in North America placed through the Google form, for a total of 167 orders so far through those two sources of orders (plus however many have come in through Monokei for Asia).
That is what I would like to think but if you read below the status bar it says
"Update of Progress Bar can be delayed. Showing Asian + EU + US Orders (Asian Orders Updated Sep.11)"
Post by: euphxenos on Tue, 12 September 2017, 01:22:42
Post by: punksinatra on Tue, 12 September 2017, 01:23:58
Initially, they tried to host the ordering for North America on Candykeys, then they switched to a Google form. I suspect the text you're looking at is an artifact of that.
Hopefully because I really wanna know the updated numbers so I can figure out when to join since I have to calculate expenses and all that stuff hahaha
Post by: beamingrobot on Tue, 12 September 2017, 03:21:51
Vietnam:
A friend of mine has agreed to help ship the orders as one bulk shipment from SG to VN. Check out the VNMK page for more details.
Malaysia:
All orders are now shipped via Poslaju. Shipping price is $3 USD (RM12).
As always, do PM or email if you've any questions :thumb:
Post by: punksinatra on Tue, 12 September 2017, 08:22:06
Update for Asian orders:
Vietnam:
A friend of mine has agreed to help ship the orders as one bulk shipment from SG to VN. Check out the VNMK page for more details.
Malaysia:
All orders are now shipped via Poslaju. Shipping price is $3 USD (RM12).
As always, do PM or email if you've any questions :thumb:
Sweet hahaha $3 next day delivery shipping. I guess someone will ship it for you? Or you will cross the border to ship?
Post by: beamingrobot on Tue, 12 September 2017, 11:00:28
I'm Malaysian so it's just a short trip back home ;)Update for Asian orders:
Vietnam:
A friend of mine has agreed to help ship the orders as one bulk shipment from SG to VN. Check out the VNMK page for more details.
Malaysia:
All orders are now shipped via Poslaju. Shipping price is $3 USD (RM12).
As always, do PM or email if you've any questions :thumb:
Sweet hahaha $3 next day delivery shipping. I guess someone will ship it for you? Or you will cross the border to ship?
Post by: punksinatra on Tue, 12 September 2017, 19:17:20
I'm Malaysian so it's just a short trip back home ;)Update for Asian orders:
Vietnam:
A friend of mine has agreed to help ship the orders as one bulk shipment from SG to VN. Check out the VNMK page for more details.
Malaysia:
All orders are now shipped via Poslaju. Shipping price is $3 USD (RM12).
As always, do PM or email if you've any questions :thumb:
Sweet hahaha $3 next day delivery shipping. I guess someone will ship it for you? Or you will cross the border to ship?
Eh, didn't know.... so sell me the carbon kits :)
Post by: zabuza1997 on Wed, 13 September 2017, 02:51:39
Post by: gaiden on Wed, 13 September 2017, 08:30:26
Sent from my SM-G935F using Tapatalk
Post by: punksinatra on Wed, 13 September 2017, 08:39:13
The form said "to 200 more until the next drop point" that can't be right... 🤣 I feel like we should be about a few dozens away right?
Sent from my SM-G935F using Tapatalk
Not sure if the status bar here https://www.candykeys.com/product/gb-sa-calm-depths-maxkey/ show the updated progress
Post by: SuperVan on Wed, 13 September 2017, 10:20:41
Post by: Zubame on Wed, 13 September 2017, 14:46:37
I need it with 2U shift. What a pity.
How many 2u shift do you need? The kit already has 2.
Post by: Atredl on Wed, 13 September 2017, 15:05:27
It has two 2.25u shifts for f660 layouts but I'm pretty sure it doesn't come with any 2u shifts.I need it with 2U shift. What a pity.
How many 2u shift do you need? The kit already has 2.
Post by: Zubame on Wed, 13 September 2017, 18:33:22
It has two 2.25u shifts for f660 layouts but I'm pretty sure it doesn't come with any 2u shifts.I need it with 2U shift. What a pity.
How many 2u shift do you need? The kit already has 2.
Oww, sorry about that.
Post by: Animalsss on Wed, 13 September 2017, 20:43:36
Post by: ye_cole on Wed, 13 September 2017, 20:45:10
Sent from my SAMSUNG-SM-G930A using Tapatalk
Post by: ye_cole on Wed, 13 September 2017, 23:19:40
So, requested samples. They requested payment through Alipay, and I'd rather not deal with that, so I asked to pay via direct wiring. This exchange took a couple of days. They've pretty much agreed, and waiting for them to reply to my latest email. Should be able to place order for samples soon. :)
Post by: Zubame on Thu, 14 September 2017, 20:28:28
Post by: ye_cole on Thu, 14 September 2017, 21:08:09
Post by: sneaky101 on Fri, 15 September 2017, 06:08:45
Post by: DillonHightower on Fri, 15 September 2017, 16:36:24
Yes, they're moving quickly and it's a good thing for everybody. I know some people will stick with SP and not buy anything else, but now we actually have a serious alternative for everybody else.I'm talking directly to Maxkey too, and they told me that jchan indeed helped with some fixes but that most of it is their own initiative. Not to take away anything from jchan/kingnestea but people need to know that Maxkey isn't clueless or stubborn, and they want to be the best.
Indeed, they did surprise me when they told me that they are willing to do the fixes, it's just the cost because Maxkey isn't a one man business and they had different visions on that.
I'm glad that we worked something out.
Sorry for derailing the thread.
So the question is when are you putting in your GB for the new troubled minds set with this vendor ?
Post by: sixdeuces on Mon, 18 September 2017, 09:58:14
There were a few people that wanted to call this Clam Derps. I will forever refer to this as that ;D
I was on the fence about joining, but this put me over the edge.
I'll have one Clam Derps, please.
Post by: TanHin on Tue, 19 September 2017, 12:46:09
I hope maxkey can make additon kit for non-standart layout in feature, and nove key too.
Post by: fractl on Tue, 19 September 2017, 13:26:57
The pricing on the US Group Buy seems based on the number of units ordered in just the US. Currently the order form shows 115 orders and a price of $123.89. The number of orders listed in the original post is 111, so I assume these are the same figures but one is simply more current than the other.
If there are 111 or 115 US orders, I assume that the total number of orders from the US plus Asia plus Europe is much higher. Wouldn't the discount be based on the combined total of all orders from all regions, since I assume that they all will be submitted and paid for at the same time?
I know that Massdrop Group Buys are regularly criticized, but at least you can commit when pricing reaches a certain level, and you have an accurate idea of where total orders and current pricing stands. With this Group Buy, I don't really know any of this and, if I want to buy at a lower price than $123, have to simply order and hope that all orders are actually totaled and I'll get a lower price in the end.
I'm not trying to be critical for no reason, but would prefer that my order wasn't based on guesswork. Not to mention that the confusion with order forms, totals, and pricing doesn't make me feel too confident overall. Again, not being critical, just honest... and hoping for some clarity and reassurance before I order.
Post by: KevlarBear on Tue, 19 September 2017, 13:34:35
Post by: Hokabuki on Tue, 19 September 2017, 15:46:34
I have a question...The multitude of pricing and order form bugs have me a little skeptical as well. If I join, it'll be at the end of the gb period so hopefully all issues are resolved at that point. I really do like the aesthetic of the set.
The pricing on the US Group Buy seems based on the number of units ordered in just the US. Currently the order form shows 115 orders and a price of $123.89. The number of orders listed in the original post is 111, so I assume these are the same figures but one is simply more current than the other.
If there are 111 or 115 US orders, I assume that the total number of orders from the US plus Asia plus Europe is much higher. Wouldn't the discount be based on the combined total of all orders from all regions, since I assume that they all will be submitted and paid for at the same time?
I know that Massdrop Group Buys are regularly criticized, but at least you can commit when pricing reaches a certain level, and you have an accurate idea of where total orders and current pricing stands. With this Group Buy, I don't really know any of this and, if I want to buy at a lower price than $123, have to simply order and hope that all orders are actually totaled and I'll get a lower price in the end.
I'm not trying to be critical for no reason, but would prefer that my order wasn't based on guesswork. Not to mention that the confusion with order forms, totals, and pricing doesn't make me feel too confident overall. Again, not being critical, just honest... and hoping for some clarity and reassurance before I order.
Post by: mintyfruits on Tue, 19 September 2017, 15:59:16
I have a question...
The pricing on the US Group Buy seems based on the number of units ordered in just the US. Currently the order form shows 115 orders and a price of $123.89. The number of orders listed in the original post is 111, so I assume these are the same figures but one is simply more current than the other.
If there are 111 or 115 US orders, I assume that the total number of orders from the US plus Asia plus Europe is much higher. Wouldn't the discount be based on the combined total of all orders from all regions, since I assume that they all will be submitted and paid for at the same time?
I know that Massdrop Group Buys are regularly criticized, but at least you can commit when pricing reaches a certain level, and you have an accurate idea of where total orders and current pricing stands. With this Group Buy, I don't really know any of this and, if I want to buy at a lower price than $123, have to simply order and hope that all orders are actually totaled and I'll get a lower price in the end.
I'm not trying to be critical for no reason, but would prefer that my order wasn't based on guesswork. Not to mention that the confusion with order forms, totals, and pricing doesn't make me feel too confident overall. Again, not being critical, just honest... and hoping for some clarity and reassurance before I order.
I would like to know the same. The numbers for the GB seem to have been really all over the place (even stretching back to the IC).
Post by: fractl on Tue, 19 September 2017, 16:05:10
I think it has been mentioned before that the order count in candykeys is all of them (US+Euro+Asia). Based on the latest numbers they are displaying we are 70% till MOQ of 200 sets. Hopefully we can reach the remaining 30% in the next 10 days! With these types of buys I always go in with the assumption that I'm going to be paying the min MOQ price and any price drops are just a bonus
Thank you for pointing me to the counter on the candykeys site. The fact that I'm a US buyer and there is no clear information indicating that I need to check the EU website for this information, again, doesn't inspire confidence.
I understand that you may go into such buys assuming that you will pay the maximum, but, of course, this doesn't negate the fact that some others will have a limit in regard to what they are willing to pay and need coherent and current information that can be located to determine if they're going to buy or not.
Post by: ye_cole on Wed, 20 September 2017, 09:39:01
Because of this, I only have to update one counter frequently, and that'll be the geekhack one. I apologize for not specifying where to view the current numbers for NA, EU, and Asia combined. For future reference, I'll add that into the OP.
Also, I'm assuming that most people who have entered are willing to pay the 200 MOQ amount. I'll add a system to select which price drop you would like to be invoiced at. That'll be in the google form in an hour.
Thank you for the critiques, I'll work on the organization.
Post by: dantambok on Sat, 23 September 2017, 09:12:51
I'd like to ask.. How many orders so far? :)
Post by: ye_cole on Sat, 23 September 2017, 10:03:57
Post by: TanHin on Sat, 23 September 2017, 11:02:42
Quote
US Orders placed: 149
Last update: 20-09-2017
Post by: ye_cole on Sat, 23 September 2017, 11:19:10
Post by: TanHin on Sat, 23 September 2017, 14:21:28
Post by: punksinatra on Sat, 23 September 2017, 23:18:53
Post by: KevlarBear on Sun, 24 September 2017, 21:22:30
Post by: ye_cole on Sun, 24 September 2017, 22:00:23
still waiting for samples, however :(
https://imgur.com/a/HhjPN
Post by: unmuscular_michael on Mon, 25 September 2017, 00:51:03
Post by: sixdeuces on Mon, 25 September 2017, 07:34:20
h y p e t r a i n
still waiting for samples, however :(
https://imgur.com/a/HhjPN
Honestly not very confidence-inspiring. Doesn't seem like they're too worried about getting you anything.
Post by: The_Boom_Boy on Mon, 25 September 2017, 08:34:03
Post by: ye_cole on Mon, 25 September 2017, 10:04:39
Quote
Honestly not very confidence-inspiring. Doesn't seem like they're too worried about getting you anything.
Fair point. However, they've been pretty good about everything else so far, so not too worried. The agent usually has those type of responses, and it's, IMO, due to the language barrier, as he's not a native English speaker. They've been pretty quick and straightforward about the quotes and responding to any other inquiries I have.
Post by: punksinatra on Mon, 25 September 2017, 11:32:31
Post by: ye_cole on Mon, 25 September 2017, 11:39:12
Sent from my SAMSUNG-SM-G930A using Tapatalk
Post by: KevlarBear on Mon, 25 September 2017, 12:32:54
Post by: jrfhoutx on Mon, 25 September 2017, 14:30:50
h y p e t r a i n
still waiting for samples, however :(
https://imgur.com/a/HhjPN
After the latest Portland GB, make sure the "fixed legend" backspace and shift are part of the samples they send out ;)
Post by: boogiemanspud on Tue, 26 September 2017, 18:02:09
Post by: ye_cole on Tue, 26 September 2017, 18:41:53
Quote
I'm 99% sure I filled out the form, but is there any way to check that I actually filled it out? I never got any kind of confirmation email, do they send one when you fill the form?
Nope! If you're feeling uncertain that you filled out the from, PM me your email.
Also, they're working on making the mold files atm, and will "give it to [us] as soon as possible".
Post by: boogiemanspud on Tue, 26 September 2017, 19:05:19
Post by: avid on Tue, 26 September 2017, 19:46:50
Can use 1.25 fn as L-shift and 0 or . as the key next to shift. So left is ISO enter.
Post by: punksinatra on Wed, 27 September 2017, 09:19:17
ISO users, have you found any solution to run with ISO layout?
Can use 1.25 fn as L-shift and 0 or . as the key next to shift. So left is ISO enter.
Maybe this?
https://pimpmykeyboard.com/sa-iso-enter-pack-of-1/
Post by: unmuscular_michael on Wed, 27 September 2017, 09:23:39
Post by: ye_cole on Wed, 27 September 2017, 09:51:45
thanks guys
appreciate the love
appreciate the support
Post by: keebdeeb on Wed, 27 September 2017, 22:37:09
Post by: ye_cole on Wed, 27 September 2017, 22:38:33
Sent from my SAMSUNG-SM-G930A using Tapatalk
Post by: keebdeeb on Wed, 27 September 2017, 22:49:52
Post by: beamingrobot on Thu, 28 September 2017, 01:57:10
Post by: BearonicMan on Thu, 28 September 2017, 09:29:14
Post by: ye_cole on Thu, 28 September 2017, 09:55:58
Honestly though, they'll be the closest you can get via using Pantone C colors. No need to worry IMO.
Sent from my SAMSUNG-SM-G930A using Tapatalk
Post by: Wolf123rt on Thu, 28 September 2017, 17:02:28
Post by: ye_cole on Thu, 28 September 2017, 17:08:06
Sent from my SAMSUNG-SM-G930A using Tapatalk
Post by: ye_cole on Thu, 28 September 2017, 17:08:56
Sent from my SAMSUNG-SM-G930A using Tapatalk
Post by: Puddsy on Thu, 28 September 2017, 17:17:01
It's not an up to date picture, due to the back space, but this should help you get a relative idea of the finish on the caps. It's more matte than shiny.
Sent from my SAMSUNG-SM-G930A using Tapatalk
So, the same as every other maxkeys set.
Post by: ye_cole on Thu, 28 September 2017, 17:43:45
Sent from my SAMSUNG-SM-G930A using Tapatalk
Post by: BearonicMan on Fri, 29 September 2017, 14:38:12
Post by: ye_cole on Fri, 29 September 2017, 20:51:56
Unfortunately, I don't think Maxkey is going to be able to provide samples before it finishes. I understand that is a deal breaker to some. However, this shouldn't be too much of an alarm. I will post the samples when they arrive, and rest assured, I've gotten the colors of calm depths matched to the closest pantone colors. The caps will be like the original set, just with a matte finish, like I showed earlier.
With that being said, I'm happy that I am able to make this set a reality. This is one of my endgame sets (the other being laser :P), and I don't want to see everyone have to shell out 350 dollars for this set. I'm proud to say that we have made this truly legendary colorway affordable, without sacrificing quality.
I appreciate the faith in me as a GB leader as well. It means a lot to me. I look forward to my future projects in the MK community as well :)
Thank you to everyone who participated and provided feedback.
Post by: gaiden on Fri, 29 September 2017, 21:33:41
Sent from my SM-G935F using Tapatalk
Post by: TanHin on Sat, 30 September 2017, 08:47:45
Post by: Ramiel on Sat, 30 September 2017, 09:42:55
XDA cannot do reverse dye sub yet
That's not true. I'm working with the factory making XDA sets currently and we're able to do reverse dye sub actually.
Post by: keebdeeb on Sat, 30 September 2017, 10:55:42
Post by: ye_cole on Sat, 30 September 2017, 12:11:00
Sent from my SAMSUNG-SM-G930A using Tapatalk
Post by: Hokabuki on Sat, 30 September 2017, 12:12:39
Post by: beamingrobot on Sun, 01 October 2017, 04:10:49
Is that so? Hmm, I talked directly to their PIC and he said it's not as good as they want it to be until the end of the year.XDA cannot do reverse dye sub yet
That's not true. I'm working with the factory making XDA sets currently and we're able to do reverse dye sub actually.
Post by: ye_cole on Sun, 01 October 2017, 09:47:16
Also, they'll be due 48 hours after sending date.
Post by: Wolf123rt on Sun, 01 October 2017, 10:51:28
Invoices are going to be sent out soon™.
Also, they'll be due 48 hours after sending date.
You're sending out invoices before showing the samples?
Post by: Puddsy on Sun, 01 October 2017, 13:34:17
Invoices are going to be sent out soon™.
Also, they'll be due 48 hours after sending date.
You're sending out invoices before showing the samples?
He doesn't have samples yet. Maxkey is traditionally very slow with samples, as well.
Post by: ye_cole on Sun, 01 October 2017, 16:29:48
Quote
You're sending out invoices before showing the samples?
Actually, yes. I'd like to invoice ASAP in order to sort out paypal payments.
Post by: boogiemanspud on Sun, 01 October 2017, 19:19:19
QuoteYou're sending out invoices before showing the samples?
Actually, yes. I'd like to invoice ASAP in order to sort out paypal payments.
I appreciate this, makes it easier to hide from my wife! :))
Post by: ye_cole on Sun, 01 October 2017, 19:38:15
Quote
I appreciate this, makes it easier to hide from my wife!
You're not quite in the clear yet haha.
So, I've sent out the first 77 invoices, and it turns out that paypal is having a bug on their end relating to invoicing. Whenever I paste (or type, even) in the email addresses, I'm receiving an infinite wait time indicated by a looping blue bubble.
I've talked to a paypal business rep about this, and he said that they were aware of the bug, and informed me the bug is not in an escalated priority. He said that they couldn't give a timeframe for fix time, but he did say soon. So basically, we have to wait until the bug is fixed for me to invoice again.
I apologize. :( I've tried everything in my power to troubleshoot, and I've used 3 other devices, all of which have the same error.
I'll invoice ASAP after this gets ironed out.
Post by: gaiden on Sun, 01 October 2017, 20:08:53
Maybe, just maybe, the samples would arrive before the invoices after all?QuoteI appreciate this, makes it easier to hide from my wife!
You're not quite in the clear yet haha.
So, I've sent out the first 77 invoices, and it turns out that paypal is having a bug on their end relating to invoicing. Whenever I paste (or type, even) in the email addresses, I'm receiving an infinite wait time indicated by a looping blue bubble.
I've talked to a paypal business rep about this, and he said that they were aware of the bug, and informed me the bug is not in an escalated priority. He said that they couldn't give a timeframe for fix time, but he did say soon. So basically, we have to wait until the bug is fixed for me to invoice again.
I apologize. :( I've tried everything in my power to troubleshoot, and I've used 3 other devices, all of which have the same error.
I'll invoice ASAP after this gets ironed out.
Sent from my SM-G935F using Tapatalk
Post by: ye_cole on Sun, 01 October 2017, 22:49:37
I've sent out almost all of the invoices now.
If I emailed you for an unclear order, I have not sent you an invoice. I will do so tomorrow, after sorting out your order.
Thank you!
Post by: punksinatra on Mon, 02 October 2017, 12:32:33
Post by: mgsickler on Mon, 02 October 2017, 17:13:46
Post by: ye_cole on Mon, 02 October 2017, 17:29:37
Post by: mgsickler on Mon, 02 October 2017, 20:56:31
I've fixed the error with duplicates. It was you and 3 other people, and I've removed all of your duplicate invoices. Tell me if you still see two invoices. Thanks.
One cancelled. Got the other one paid. :-)
Post by: Petch on Wed, 04 October 2017, 04:57:30
Post by: ye_cole on Wed, 04 October 2017, 08:17:50
Sent from my SAMSUNG-SM-G930A using Tapatalk
Post by: ye_cole on Wed, 04 October 2017, 19:04:14
Also, current invoice due date extended until friday, oct 6th PST due to 34 people not paying their invoices on time. If they are not paid by friday, I'll have to cancel them.
Post by: Petch on Thu, 05 October 2017, 13:08:44
Edit: received an email this evening and paid
Post by: Sporty on Fri, 06 October 2017, 11:30:17
Post by: ye_cole on Fri, 06 October 2017, 11:39:47
Sent from my SAMSUNG-SM-G930A using Tapatalk
Post by: KevlarBear on Fri, 06 October 2017, 11:54:21
Post by: ye_cole on Fri, 06 October 2017, 12:19:30
I'ma just tell myself I'm perfectly happy with my pok3r.
Sent from my SAMSUNG-SM-G930A using Tapatalk
Post by: ye_cole on Sat, 07 October 2017, 22:02:30
Weekly update #1 up in the OP.
You can expect these every 7-10 days for the duration of the GB.
Post by: zabuza1997 on Tue, 10 October 2017, 02:18:59
Sent from my MI MAX using Tapatalk
Post by: ye_cole on Tue, 10 October 2017, 02:43:47
However, I don't want to do this on principle. The GB period is over, and you'll probably have to get extras. Go talk to candykeys about it, as you're not in the states.
By the way, I'm planning to not order any extras for states, but if I do, there won't be very many.
:/
Just wanted to let you know.
Sent from my SAMSUNG-SM-G930A using Tapatalk
Post by: amatecha on Wed, 11 October 2017, 15:30:42
Post by: online on Fri, 13 October 2017, 12:10:21
Should I expect a confirmation email?
Post by: ye_cole on Fri, 13 October 2017, 12:20:10
Sent from my SAMSUNG-SM-G930A using Tapatalk
Post by: online on Sat, 14 October 2017, 06:45:02
Nope. If it says invoice paid, I have your info and will ship it to you.
Sent from my SAMSUNG-SM-G930A using Tapatalk
Thanks for your reply.
I didn't receive a PayPal invoice. It is a standard email with bank details and Paypal email address from Candykeys.
Then I paid by using 'Pay for goods and service' on Paypal with the order number in the note.
Hope they have received and acknowledge it. Didn't want to be kicked out of the group buy.
Haven't joined a group buy like this before, it makes me feel a bit worry when I paid and received no confirmation.
Post by: ye_cole on Sat, 14 October 2017, 17:59:35
Post by: pixelpusher on Sat, 14 October 2017, 21:51:30
Post by: beamingrobot on Sun, 15 October 2017, 09:17:43
You know, I joined this group buy like the first day it was available, but it slipped my mind to check up on it. Apparently I never got an invoice emailed to me. The US buy was run through Monokei, right? I wonder how many people they failed to invoice. That sucks for me. :(
We did not run the US buy, we proxied for Asia.
Post by: pixelpusher on Sun, 15 October 2017, 10:20:13
Post by: xondat on Sun, 15 October 2017, 10:25:35
Okay so it was candy keys then? Just trying to look through PayPal and emails on different accounts to track it down. But I can’t find anything. Hopefully there will be extras somewhere.
ye_cole = NA, everyone else
Candy Keys = EU
beamingrobot/monokei = Asia
Post by: online on Mon, 16 October 2017, 13:03:46
Thank you for letting me know. Shoot me your email via PM and I'll contact them to confirm that they got your order.Got a reply from candykey today. Thanks ye_cole.
Post by: zabuza1997 on Sun, 22 October 2017, 17:54:25
Post by: xondat on Sun, 22 October 2017, 18:08:20
Bump!!!!
Why/what for?
Post by: ye_cole on Sun, 22 October 2017, 18:10:24
Not that the thread shouldn't be bumped, it's just that there was no reason to bump for the sake of bumping.
Minor tangent there, sorry. :)
Sent from my SAMSUNG-SM-G930A using Tapatalk
Post by: euphxenos on Sun, 22 October 2017, 22:39:44
https://geekhack.org/index.php?topic=91288.msg2503164#msg2503164
Hoq asked Maxkeys if the 1U Fn, Ctrl, and Alt molds made for Calm Depths could be used Maxkey Flamingo, and was told the molds were to weak and wouldn't last for a second set.
Post by: ye_cole on Sun, 22 October 2017, 22:47:50
I ran calm depths as well, so I'm going to ask them if I can use the molds we're paying for with that set.
I hope I can, but if not, :/. Going to have to pay mold fees (6000 dollars, tf) anyway, as I'm going to be making new molds with this one too.
At the end, it's still quality af, and a good ass deal for SA.
Sent from my SAMSUNG-SM-G930A using Tapatalk
Post by: Atredl on Sun, 22 October 2017, 23:15:34
One odd thing about Maxkeys: it sounds like once molds are made for a new key, they won't necessarily be available to be used by later sets:I guess that means they’re definitely not using steel for these molds. I’ve heard SP uses brass for some/all of their keys. Maybe Maxkeys is using something even softer than brass for these type of keys.
https://geekhack.org/index.php?topic=91288.msg2503164#msg2503164
Hoq asked Maxkeys if the 1U Fn, Ctrl, and Alt molds made for Calm Depths could be used Maxkey Flamingo, and was told the molds were to weak and wouldn't last for a second set.
Post by: amatecha on Mon, 23 October 2017, 18:20:07
Edit: Relevant thread on making keycap molds: https://geekhack.org/index.php?topic=91596.0 :)
Post by: Atredl on Mon, 23 October 2017, 18:40:54
That sounds pretty strange. What kind of metal would a plastics company use to make molds that doesn't survive more than a single run? What if that one run is a LOT of keys? Does that mean the last sets that get produced are of a degraded quality compared to the very first sets produced?I’d be curious to find that out as well.
Quote
Forgive my ignorance on the matter, but I would expect they'd make the molds for a given profile once, and reuse them "indefinitely".Molds that last longer are more expensive to make. For example, steel molds are strong and durable but that strength also makes them harder to work with and thus more expensive. For something like a novelty, the manufacturer might choose a less expensive material for the mold since they don’t expect to use the mold that often.
Quote
I've always wondered why all these GBs for the same profile keycaps include a cost for producing molds...Not all GBs have mold costs. The mold costs that they’re referring to are for the legends, not the outer keycap shape. Keysets only have mold costs when new molds need to be made (i.e. novelties, new legends or entirely new keycap profiles)
All that said, I’m still not sure why Maxkeys can only use some molds once.
Post by: ye_cole on Tue, 24 October 2017, 20:27:22
Should be in my hands in January.
I'm not sure how long it will take me to ship 156 sets, so to play it safe, I'm going to say around 2-3 weeks for shipping it? 2-3 day shipping time, USPS.
Sorry for the relative lack of updates. I know this one isn't very substantial, but I thought I should post it. :)
Post by: boogiemanspud on Fri, 27 October 2017, 21:04:21
Yaay! A more concrete date.
Should be in my hands in January.
I'm not sure how long it will take me to ship 156 sets, so to play it safe, I'm going to say around 2-3 weeks for shipping it? 2-3 day shipping time, USPS.
Sorry for the relative lack of updates. I know this one isn't very substantial, but I thought I should post it. :)
Awesome. It's already the end of October, January will be here before we know it! :)
Post by: ye_cole on Thu, 02 November 2017, 08:26:21
Sent from my SAMSUNG-SM-G930A using Tapatalk
Post by: ye_cole on Mon, 06 November 2017, 13:48:23
They only will provide sample caps when they finish making our molds.
Anyway, hold tight. It's coming.
Also, production time should not be that long. My current estimate of the end of January still stands.
Sent from my SAMSUNG-SM-G930A using Tapatalk
Post by: Petch on Mon, 06 November 2017, 16:37:06
We should be getting samples of the new molds in 48 days.
They only will provide sample caps when they finish making our molds.
Anyway, hold tight. It's coming.
Also, production time should not be that long. My current estimate of the end of January still stands.
Sent from my SAMSUNG-SM-G930A using Tapatalk
Are they still using brass or w/e it was for moulds rather than steel, limiting the number of times they can be used?
If so I'd be surprised, because the extra moulds you added are going to be requested a lot
Post by: ye_cole on Mon, 06 November 2017, 17:02:58
The molds can be used, but only for 800 sets. SA Fade/Fortune is using them, and that should make it cheaper for that set. Also, royalty, when it comes to it.
But I'll have to ask them if they can add those molds to their base offering, as I assume a lot of new sets will want to use them.
Sent from my SAMSUNG-SM-G930A using Tapatalk
Post by: zabuza1997 on Mon, 20 November 2017, 07:12:21
Post by: ye_cole on Mon, 20 November 2017, 14:14:10
I'm trying to work out some issues with Maxkey ATM, and am talking to their agent to fix it.
Hold tight, they'll get to you.
Sent from my SAMSUNG-SM-G930A using Tapatalk
Post by: JubJubCity on Tue, 21 November 2017, 21:19:28
Post by: ye_cole on Tue, 21 November 2017, 21:20:59
Sent from my SAMSUNG-SM-G930A using Tapatalk
Post by: Evilocity on Wed, 22 November 2017, 06:54:58
Nope. They're still making the molds at the moment.
Sent from my SAMSUNG-SM-G930A using Tapatalk
I heard that they are way behind schedule because of mold issues. They have SA Superheroes and SA Nuclear to make still.
Post by: ye_cole on Wed, 22 November 2017, 09:53:59
They said it would take 45 days from that point, but they said production will not take as long.
Sent from my SAMSUNG-SM-G930A using Tapatalk
Post by: amatecha on Mon, 27 November 2017, 19:42:07
Post by: SakeJams on Thu, 30 November 2017, 20:30:20
Post by: r4wromg on Thu, 30 November 2017, 23:32:29
I would second the color sample requests, I've been hearing weird stuff about off colors :/
Agreed, would rather be safe and have to wait a bit longer to get a color accurate set
Post by: KevlarBear on Thu, 30 November 2017, 23:34:39
I would second the color sample requests, I've been hearing weird stuff about off colors :/
Agreed, would rather be safe and have to wait a bit longer to get a color accurate set
Same here, would much rather wait longer vs getting an inaccurate set
Post by: ye_cole on Thu, 30 November 2017, 23:58:38
OK, no way I'm going to send the full payment before I receive color samples then. I've only paid for the molds thus far (an advance of sorts), and they're still in production. After those are done, theeennnn i pay for all of the sets.
I'll keep you guys updated, but the process of obtaining samples may impose some delays.
Post by: Vadurr on Fri, 01 December 2017, 01:19:29
Fuuuck, that's bad.
OK, no way I'm going to send the full payment before I receive color samples then. I've only paid for the molds thus far (an advance of sorts), and they're still in production. After those are done, theeennnn i pay for all of the sets.
I'll keep you guys updated, but the process of obtaining samples may impose some delays.
Although I missed this GB, I feel like delays are usually okay for the most part, as long as the runner is transparent. Which doesn't seem like it'll be a problem here :thumb:
Post by: Petch on Fri, 01 December 2017, 07:10:10
Fuuuck, that's bad.
OK, no way I'm going to send the full payment before I receive color samples then. I've only paid for the molds thus far (an advance of sorts), and they're still in production. After those are done, theeennnn i pay for all of the sets.
I'll keep you guys updated, but the process of obtaining samples may impose some delays.
Good decision
Post by: BearonicMan on Fri, 01 December 2017, 13:16:48
Fuuuck, that's bad.
OK, no way I'm going to send the full payment before I receive color samples then. I've only paid for the molds thus far (an advance of sorts), and they're still in production. After those are done, theeennnn i pay for all of the sets.
I'll keep you guys updated, but the process of obtaining samples may impose some delays.
Yea dude, I'd rather wait a few extra weeks\months than get something that's ****ed up. Take your time and don't let a few loud people get to you. Thanks again for doing this.
Post by: Puddsy on Fri, 01 December 2017, 13:19:33
i'd call color samples a good delay
Post by: SakeJams on Fri, 01 December 2017, 13:31:19
no delays > good delays > bad delaysWords to live by when it comes to GBs. Too often you see people go for no delays regardless of standard quality control and lately you're starting to see the outcome.
i'd call color samples a good delay
Post by: alveeno on Fri, 01 December 2017, 13:59:37
Post by: euphxenos on Fri, 01 December 2017, 16:54:20
Post by: The_Boom_Boy on Fri, 01 December 2017, 19:44:49
Post by: boogiemanspud on Sun, 03 December 2017, 17:17:31
Post by: euphxenos on Tue, 05 December 2017, 14:15:31
Post by: Atredl on Tue, 05 December 2017, 14:31:34
I don't know when it happened, but the final layout render shows the 1U Fn key in R3 instead of R4. Is it too late to correct that?Where are you seeing that? This render doesn't show that and neither does the mold file on the previous page.
(https://i.imgur.com/sQRcsX7.png)
Here are the mold files!Show Image(https://uploads.tapatalk-cdn.com/20171102/4a15474a5548ae911e9a514a1b1cf07c.jpg)
Post by: euphxenos on Tue, 05 December 2017, 16:55:45
I don't know when it happened, but the final layout render shows the 1U Fn key in R3 instead of R4. Is it too late to correct that?Where are you seeing that? This render doesn't show that and neither does the mold file on the previous page.Show Image(https://i.imgur.com/sQRcsX7.png)Here are the mold files!Show Image(https://uploads.tapatalk-cdn.com/20171102/4a15474a5548ae911e9a514a1b1cf07c.jpg)
Sorry -- I said the exact opposite of what I meant. That render shows the 1U Fn key in R4 (the row with the shift keys and zxcvbnm), instead of in the bottom row (with the spacebar), which is R3 in Maxkeys. I believe earlier renders showed that 1U Fn in R3, which would make sense for 65% layouts looking to use it along with 1U Ctrl and Alt in the bottom row. I think the intent was to have 1U Fn, Ctrl, and Alt all available for the bottom row.
Post by: Atredl on Tue, 05 December 2017, 17:46:05
Many people need it in row 4 though since it’s quite popular to use a split right shift/fn combo on 60% boards. The layout you want to use it for is certainly valid but switching it from row 4 to 3 would upset the many people that use it in row 4.I don't know when it happened, but the final layout render shows the 1U Fn key in R3 instead of R4. Is it too late to correct that?Where are you seeing that? This render doesn't show that and neither does the mold file on the previous page.Show Image(https://i.imgur.com/sQRcsX7.png)Here are the mold files!Show Image(https://uploads.tapatalk-cdn.com/20171102/4a15474a5548ae911e9a514a1b1cf07c.jpg)
Sorry -- I said the exact opposite of what I meant. That render shows the 1U Fn key in R4 (the row with the shift keys and zxcvbnm), instead of in the bottom row (with the spacebar), which is R3 in Maxkeys. I believe earlier renders showed that 1U Fn in R3, which would make sense for 65% layouts looking to use it along with 1U Ctrl and Alt in the bottom row. I think the intent was to have 1U Fn, Ctrl, and Alt all available for the bottom row.
Post by: euphxenos on Tue, 05 December 2017, 18:32:46
Many people need it in row 4 though since it’s quite popular to use a split right shift/fn combo on 60% boards. The layout you want to use it for is certainly valid but switching it from row 4 to 3 would upset the many people that use it in row 4.I don't know when it happened, but the final layout render shows the 1U Fn key in R3 instead of R4. Is it too late to correct that?Where are you seeing that? This render doesn't show that and neither does the mold file on the previous page.Show Image(https://i.imgur.com/sQRcsX7.png)Here are the mold files!Show Image(https://uploads.tapatalk-cdn.com/20171102/4a15474a5548ae911e9a514a1b1cf07c.jpg)
Sorry -- I said the exact opposite of what I meant. That render shows the 1U Fn key in R4 (the row with the shift keys and zxcvbnm), instead of in the bottom row (with the spacebar), which is R3 in Maxkeys. I believe earlier renders showed that 1U Fn in R3, which would make sense for 65% layouts looking to use it along with 1U Ctrl and Alt in the bottom row. I think the intent was to have 1U Fn, Ctrl, and Alt all available for the bottom row.
Oh well. At least now I don't have to worry about whether the colors turn out right.
Post by: Atredl on Tue, 05 December 2017, 18:36:50
Why not just use one of the “code” keys? :rolleyes:
Oh well. At least now I don't have to worry about whether the colors turn out right.
Post by: LevelSteam on Thu, 07 December 2017, 15:46:41
Post by: SakeJams on Thu, 07 December 2017, 15:53:23
Post by: ye_cole on Thu, 07 December 2017, 19:39:33
Post by: LevelSteam on Fri, 08 December 2017, 09:12:42
Samples and molds should be done in roughly one month from now. I apolgize for the delay.
Thanks for the update! And getting samples.
Post by: boogiemanspud on Sun, 10 December 2017, 01:38:41
Samples and molds should be done in roughly one month from now. I apolgize for the delay.
No trouble at all, thanks for the update! Better a bit late and right than early and junk :)
Post by: amatecha on Mon, 11 December 2017, 20:30:33
Samples and molds should be done in roughly one month from now. I apolgize for the delay.
No worries, thanks man!
Post by: ye_cole on Sun, 17 December 2017, 00:20:04
2 weeks!
Expect mediocre comparison photos then, and you'll get good comparison photos in around a week or two after that (i'll have access to a studio then).
Post by: ye_cole on Sun, 17 December 2017, 00:20:27
Post by: SakeJams on Sun, 17 December 2017, 00:29:36
We're getting samples, and I'm going to make sure they're correct before proceeding with the second payment.Cool man! Can't wait!
2 weeks!
Expect mediocre comparison photos then, and you'll get good comparison photos in around a week or two after that (i'll have access to a studio then).
Post by: Vadurr on Sun, 17 December 2017, 19:38:46
Post by: shensmobile on Tue, 19 December 2017, 15:38:25
Any chance for extras here?
Would you be interested in taking my spot? I've come under a bit of financial pressure and would be happy to transfer my order.
Post by: Vadurr on Tue, 19 December 2017, 15:52:39
Any chance for extras here?
Would you be interested in taking my spot? I've come under a bit of financial pressure and would be happy to transfer my order.
Fine by me if OP approves :thumb:
Post by: ye_cole on Wed, 20 December 2017, 16:33:01
Quote
Quote from: shensmobile on Tue, 19 December 2017, 15:38:25
Quote from: Vadurr on Sun, 17 December 2017, 19:38:46
Any chance for extras here?
Would you be interested in taking my spot? I've come under a bit of financial pressure and would be happy to transfer my order.
Fine by me if OP approves :thumb:
Yeah, this is fine. I'll take care of it on friday!
Also, posted an update to r/mm, but nothing that hasn't been said here already. :/
Post by: zabuza1997 on Thu, 04 January 2018, 19:39:55
Post by: ye_cole on Sun, 07 January 2018, 00:38:38
sorry man haha
Post by: Vadurr on Sun, 07 January 2018, 00:59:50
https://imgur.com/a/IJLu2
sorry man haha
Thanks for the update!
Post by: SakeJams on Sun, 07 January 2018, 01:00:32
https://imgur.com/a/IJLu2Is that for the caps or the samples?
sorry man haha
Post by: ye_cole on Tue, 09 January 2018, 00:20:06
Post by: SakeJams on Tue, 09 January 2018, 00:39:40
Post by: ye_cole on Tue, 16 January 2018, 01:01:49
Unfortunately, we have to wait a bit longer. Soon^tm, i guess.
Honestly, i'm really sorry for the delay, but it's completely out of my control.
Also, i don't know if i mentioned this, but i'm going to be going there to make the final payment myself. I think i only said this in the r/mm update.
anyway, that's it for now. hold tight, guys.
Post by: SakeJams on Tue, 16 January 2018, 01:17:19
https://imgur.com/a/yvS7iAh damn, no worries I suppose. Delays are to be expected! You have a set date on when youre going to make the final payment?
Unfortunately, we have to wait a bit longer. Soon^tm, i guess.
Honestly, i'm really sorry for the delay, but it's completely out of my control.
Also, i don't know if i mentioned this, but i'm going to be going there to make the final payment myself. I think i only said this in the r/mm update.
anyway, that's it for now. hold tight, guys.
Post by: ye_cole on Tue, 16 January 2018, 15:44:47
Post by: Vadurr on Tue, 16 January 2018, 16:12:59
Post by: zabuza1997 on Tue, 16 January 2018, 16:14:33
https://imgur.com/a/yvS7iDayum. Safe trip to China man!
Unfortunately, we have to wait a bit longer. Soon^tm, i guess.
Honestly, i'm really sorry for the delay, but it's completely out of my control.
Also, i don't know if i mentioned this, but i'm going to be going there to make the final payment myself. I think i only said this in the r/mm update.
anyway, that's it for now. hold tight, guys.
Post by: amatecha on Wed, 17 January 2018, 16:46:59
Post by: zabuza1997 on Mon, 22 January 2018, 19:01:30
Post by: ye_cole on Tue, 23 January 2018, 08:07:08
there you go!
Post by: ye_cole on Tue, 23 January 2018, 08:09:09
Post by: Evilocity on Tue, 23 January 2018, 08:54:51
I don't have the samples on hand at the moment, so there are photos the agent sent to me.
The samples look good! I hope it's goes in production soon!
Post by: ye_cole on Tue, 23 January 2018, 09:02:18
Quote
The samples look good! I hope it's goes in production soon!
I'd like to compare them to the actual keys from the set, though.
Post by: The_Boom_Boy on Tue, 23 January 2018, 09:39:32
Post by: ye_cole on Tue, 23 January 2018, 09:44:30
Quote
Yes! it is coming along so excited
Me too man!
The delays were kinda getting to me. Whew.
Post by: SakeJams on Tue, 23 January 2018, 12:06:46
Post by: Vadurr on Tue, 23 January 2018, 15:00:43
QuoteThe samples look good! I hope it's goes in production soon!
I'd like to compare them to the actual keys from the set, though.
Will you be able to get a side by side comparison?
Post by: ye_cole on Tue, 23 January 2018, 15:02:24
Post by: amatecha on Wed, 24 January 2018, 16:51:34
Post by: amatecha on Wed, 24 January 2018, 17:38:41
Post by: SakeJams on Wed, 24 January 2018, 17:40:58
Post by: ye_cole on Wed, 24 January 2018, 19:16:30
Quote
Whoa, those legends are just a test color, right? They're supposed to be that cyan/turqoise-ish color, no? Other than that, looking decent. Hard to tell by those cellphone photos though :'D
Yep, pretty much. Those are color samples, the actual legends arent going to be that color. I just requested the plastic colors, i didn't really specify what color legend as I assumed they would be blank.
Quote
Have a critical eye when you review these things.. check out what some ppl are getting from the recent Maxkey SA Lime group buy (doubleshot ABS)
Sure.
Quote
What's up with the legend color??
Those aren't going to be the actual colors haha. The legend colors will all be the shade of blue in the center (of first image).
Post by: jrfhoutx on Wed, 24 January 2018, 22:23:10
Have a critical eye when you review these things.. check out what some ppl are getting from the recent Maxkey SA Lime group buy (doubleshot ABS)
Honestly, those don’t look any worse than some SP sets... if the MaxKeys sets cost as much as an SP set I’d be mad about those caps.
Post by: pixelpusher on Thu, 25 January 2018, 19:26:17
Have a critical eye when you review these things.. check out what some ppl are getting from the recent Maxkey SA Lime group buy (doubleshot ABS)
My amazing chocolatier set looks very similar to this, as does my Filco SA set. I’m looking forward to the new SP PBT molds. Hopefully we can get a pristine SA set for good value.
I was impressed with my lime set that I received today. I would buy it again. The only issue I have is the D legend looks off to me.
Post by: ye_cole on Thu, 25 January 2018, 20:23:57
Quote
My amazing chocolatier set looks very similar to this, as does my Filco SA set. I’m looking forward to the new SP PBT molds. Hopefully we can get a pristine SA set for good value.
I was impressed with my lime set that I received today. I would buy it again. The only issue I have is the D legend looks off to me.
+1. For the short time I had SA chocolatier (planck kit + alphas), it wasn't the highest quality. it had a factory scratch on the keys as well. :(
Post by: jrfhoutx on Fri, 26 January 2018, 23:29:43
QuoteMy amazing chocolatier set looks very similar to this, as does my Filco SA set. I’m looking forward to the new SP PBT molds. Hopefully we can get a pristine SA set for good value.
I was impressed with my lime set that I received today. I would buy it again. The only issue I have is the D legend looks off to me.
+1. For the short time I had SA chocolatier (planck kit + alphas), it wasn't the highest quality. it had a factory scratch on the keys as well. :(
SP’s lackluster packaging doesn’t exactly help when it comes to getting scratch free caps though.
And yeah I have similar markings in some of the caps for my 1965 set (though not quite as bad as the ones shown in Lime).
Post by: WarmCat on Tue, 30 January 2018, 21:24:26
QuoteMy amazing chocolatier set looks very similar to this, as does my Filco SA set. I’m looking forward to the new SP PBT molds. Hopefully we can get a pristine SA set for good value.
I was impressed with my lime set that I received today. I would buy it again. The only issue I have is the D legend looks off to me.
+1. For the short time I had SA chocolatier (planck kit + alphas), it wasn't the highest quality. it had a factory scratch on the keys as well. :(
SP’s lackluster packaging doesn’t exactly help when it comes to getting scratch free caps though.
And yeah I have similar markings in some of the caps for my 1965 set (though not quite as bad as the ones shown in Lime).
I received both MaxKeys Lime and MaxKeys BG at the same time (ordered from KBDFANS).
Lime shows similar issues as shown here. BG, however is totally flawless, really is great; better than the few bits I have from SP.
Post by: skyybaby on Wed, 31 January 2018, 09:36:30
Post by: xZ3ROx on Wed, 31 January 2018, 18:11:12
I'm looking for someone to buy out my spot or take my spot so I can get a refund. I'm hoping it is ok with ye_cole. I'm new to geekhack so idk how to tag ye_cole... If anyone wants, I can be contacted under reddit with the same username. As much as I want this set I could really use the money instead as I'm in the process of closing on a new house.
Dm
Sent from my iPhone using Tapatalk
Post by: ye_cole on Wed, 31 January 2018, 19:39:31
I recieved the samples today at my house.
You can expect hi resolution comparison photos by the end of tomorrow (PST).
The blues seem to match perfectly. The grey is a shade or so lighter than the OG grey.
Post by: ye_cole on Wed, 31 January 2018, 19:40:22
Quote
I'm looking for someone to buy out my spot or take my spot so I can get a refund. I'm hoping it is ok with ye_cole. I'm new to geekhack so idk how to tag ye_cole... If anyone wants, I can be contacted under reddit with the same username. As much as I want this set I could really use the money instead as I'm in the process of closing on a new house.
That's cool man!
Work it out first with the other person though.
Post by: xZ3ROx on Wed, 31 January 2018, 19:41:29
QuoteI'm looking for someone to buy out my spot or take my spot so I can get a refund. I'm hoping it is ok with ye_cole. I'm new to geekhack so idk how to tag ye_cole... If anyone wants, I can be contacted under reddit with the same username. As much as I want this set I could really use the money instead as I'm in the process of closing on a new house.
That's cool man!
Work it out first with the other person though.
I dm him. Hopefully I am able to take over his spot
Sent from my iPhone using Tapatalk
Post by: ye_cole on Wed, 31 January 2018, 19:48:26
https://cdn.discordapp.com/attachments/234802192014508033/408436945610473482/image.jpg
https://cdn.discordapp.com/attachments/234802192014508033/408437009657626625/image.jpg
https://cdn.discordapp.com/attachments/234802192014508033/408437029106483201/image.jpg
these are some bad ones, but they'll do for now!
Post by: Vadurr on Thu, 01 February 2018, 00:05:38
Hey guys!
I recieved the samples today at my house.
You can expect hi resolution comparison photos by the end of tomorrow (PST).
The blues seem to match perfectly. The grey is a shade or so lighter than the OG grey.
The blues look perfect! Are you going to try and get the gray to match perfectly or are we going with the current one?
Post by: ye_cole on Thu, 01 February 2018, 00:07:06
Post by: Vadurr on Thu, 01 February 2018, 01:05:48
Honestly, I'm not sure. It would cause another delay, and I'm not sure if I'm still fine with that, because we've had to have so many delays already. I'll have to post a poll on here and reddit.
Personally, I'd rather wait for the right color to turn out.
Post by: BearonicMan on Thu, 01 February 2018, 08:36:07
Honestly, I'm not sure. It would cause another delay, and I'm not sure if I'm still fine with that, because we've had to have so many delays already. I'll have to post a poll on here and reddit.
I'd be down for waiting as well, we've spent this long, might as well do it right. Thanks again for running this!
Post by: gaiden on Thu, 01 February 2018, 09:04:02
JK Jk wait a few more months
Sent from my SM-G935F using Tapatalk
Post by: ye_cole on Thu, 01 February 2018, 09:43:17
Quote
Personally, I'd rather wait for the right color to turn out.
Quote
I'd be down for waiting as well, we've spent this long, might as well do it right. Thanks again for running this!
Quote
At this point ppl should probably write this in their will..
JK Jk wait a few more months
Thank you for the feedback! I've made a strawpoll where you can vote too, and if you joined the GB, you'll be recieving an email from me with a google form where you can vote on what you'd like to do.
Strawpoll: https://strawpoll.com/16bzgdew
Also, I have some HD comparisons with ****ty focusing because I'm a total amateur. https://imgur.com/a/8ATUF
Post by: skyybaby on Thu, 01 February 2018, 09:44:10
QuoteI'm looking for someone to buy out my spot or take my spot so I can get a refund. I'm hoping it is ok with ye_cole. I'm new to geekhack so idk how to tag ye_cole... If anyone wants, I can be contacted under reddit with the same username. As much as I want this set I could really use the money instead as I'm in the process of closing on a new house.
That's cool man!
Work it out first with the other person though.
I dm him. Hopefully I am able to take over his spot
So it seems that xZ3ROx wants to take my spot, they've messaged me on here and reddit. So do I just get a refund and then you will send them an invoice? I'm not sure how to go about this.
Post by: ye_cole on Thu, 01 February 2018, 09:55:37
Quote
So it seems that xZ3ROx wants to take my spot, they've messaged me on here and reddit. So do I just get a refund and then you will send them an invoice? I'm not sure how to go about this.
Pretty much, yeah. Would you like to send more details on reddit? u/guess_whos_black, PM me your email address, their email address, and their country.
Post by: skyybaby on Thu, 01 February 2018, 10:05:18
QuoteSo it seems that xZ3ROx wants to take my spot, they've messaged me on here and reddit. So do I just get a refund and then you will send them an invoice? I'm not sure how to go about this.
Pretty much, yeah. Would you like to send more details on reddit? u/guess_whos_black, PM me your email address, their email address, and their country.
PM'd on Reddit. I included xzerox in the reddit chat as well.
Post by: KevlarBear on Thu, 01 February 2018, 10:54:23
Post by: clorex on Thu, 01 February 2018, 11:33:29
https://cdn.discordapp.com/attachments/234802192014508033/408436923124678656/image.jpgJudging from the 3rd pic, Maxkey's grey is not just lighter but looks to be warmer in hue as opposed to SP's cooler hue. So I vote to delay it as necessary. I'm in no hurry to get it although I can only speak for myself.
https://cdn.discordapp.com/attachments/234802192014508033/408436945610473482/image.jpg
https://cdn.discordapp.com/attachments/234802192014508033/408437009657626625/image.jpg
https://cdn.discordapp.com/attachments/234802192014508033/408437029106483201/image.jpg
these are some bad ones, but they'll do for now!
In a similar case, the Maxkey Orange on Dolch alphas were pretty close to SP Hack'd by Geeks but was also let down by the mods IIRC.
Post by: amatecha on Thu, 01 February 2018, 17:46:53
Best way to take pics, white or light gray surface/background, sunlight or pure white light (generally speaking). Something the camera can very easily grey-balance against, anyway.
I'm all for waiting for a color adjustment to make it more accurate to the original colors (already voted in the strawpoll) :)
Post by: SakeJams on Thu, 01 February 2018, 17:49:29
Post by: boogiemanspud on Fri, 02 February 2018, 00:24:21
Judging from the 3rd pic, Maxkey's grey is not just lighter but looks to be warmer in hue as opposed to SP's cooler hue. So I vote to delay it as necessary. I'm in no hurry to get it although I can only speak for myself.
I feel the exact same way. The grey looks warmer which isn't good on a set meant to be cool and calming. The dark blue also looks like it needs some tweaking, looks closer to black than blue.
This set is pretty much impossible to get as is, so a delay is fine with me. Matching the colorways is pretty much the utmost concern for me. Thanks for the pics! They are proof things are moving in the right direction.
Is there any way to get pics under a less yellow light? Maybe either in daylight or under florescent an/or cool lighting? I kind of feel the lighting may be changing looks also.
Post by: LevelSteam on Fri, 02 February 2018, 15:46:43
I'm also ok with waiting longer to get the most accurate colors possible. Both the dark blue and grey look off to me as well. The grey more so than the blue.
Post by: Vadurr on Fri, 02 February 2018, 15:51:47
Judging from the 3rd pic, Maxkey's grey is not just lighter but looks to be warmer in hue as opposed to SP's cooler hue. So I vote to delay it as necessary. I'm in no hurry to get it although I can only speak for myself.
I feel the exact same way. The grey looks warmer which isn't good on a set meant to be cool and calming. The dark blue also looks like it needs some tweaking, looks closer to black than blue.
This set is pretty much impossible to get as is, so a delay is fine with me. Matching the colorways is pretty much the utmost concern for me. Thanks for the pics! They are proof things are moving in the right direction.
Is there any way to get pics under a less yellow light? Maybe either in daylight or under florescent an/or cool lighting? I kind of feel the lighting may be changing looks also.
I strongly agree with the grey looking to warm vs cool.
Post by: ye_cole on Wed, 07 February 2018, 20:12:47
All of china's off for next two weeks.
Post by: Oblotzky on Wed, 07 February 2018, 20:25:10
New samples march, they're going to be 300.
All of china's off for next two weeks.
Am I reading this right that you requested color adjustments, and will find out how those new colors will look like in the form of 300 sets delivered?
Post by: SakeJams on Wed, 07 February 2018, 20:27:53
Post by: ye_cole on Wed, 07 February 2018, 21:58:33
Quote
Am I reading this right that you requested color adjustments, and will find out how those new colors will look like in the form of 300 sets delivered?
Uhh, no. That would be an idiotic move. They're going to cost 300, which honestly in retrospect is rather irrelevant info.
edited op.
Post by: BearonicMan on Thu, 08 February 2018, 09:23:06
New samples march.
All of china's off for next two weeks.
Sounds good, thanks for the update.
Post by: dc_in_sf on Thu, 08 February 2018, 18:34:48
Post by: ryancopenhaver on Thu, 08 February 2018, 18:48:48
sorry I missed this one, if anyone wants to drop out let me know :)Actually, I can take you up on that. I've run into some rough events that require more funds than usual, so this would actually help me out. I'm not quite sure how to go about it though.
I got mine from the US seller through Google Docs
Sent from my SM-G930V using Tapatalk
Post by: Puddsy on Thu, 08 February 2018, 20:48:55
sorry I missed this one, if anyone wants to drop out let me know :)Actually, I can take you up on that. I've run into some rough events that require more funds than usual, so this would actually help me out. I'm not quite sure how to go about it though.
I got mine from the US seller through Google Docs
Sent from my SM-G930V using Tapatalk
i would recommend just waiting for it to show up and then selling it
it's too risky to swap without an item in hand
Post by: ryancopenhaver on Thu, 08 February 2018, 21:18:32
Understandable. I hit up ye_cole on Reddit to see what he thinks.sorry I missed this one, if anyone wants to drop out let me know :)Actually, I can take you up on that. I've run into some rough events that require more funds than usual, so this would actually help me out. I'm not quite sure how to go about it though.
I got mine from the US seller through Google Docs
Sent from my SM-G930V using Tapatalk
i would recommend just waiting for it to show up and then selling it
it's too risky to swap without an item in hand
Sent from my SM-G930V using Tapatalk
Post by: buzzking00 on Thu, 08 February 2018, 22:12:33
Post by: ye_cole on Fri, 09 February 2018, 00:01:25
Quote
i would recommend just waiting for it to show up and then selling it
it's too risky to swap without an item in hand
it messes with my logistics, too. ;(
Quote
Understandable. I hit up ye_cole on Reddit to see what he thinks.
I'll take care of this in around a day or two, during the weekend. Your PM was read. :)
Post by: roguepotato_ on Sun, 11 February 2018, 18:38:29
Post by: Esheu2 on Sun, 25 February 2018, 17:24:32
Post by: zabuza1997 on Wed, 28 February 2018, 19:54:10
Post by: ye_cole on Thu, 01 March 2018, 19:17:30
Post by: ye_cole on Thu, 01 March 2018, 22:32:40
Post by: amatecha on Fri, 02 March 2018, 14:00:58
Post by: neoCobweb on Mon, 05 March 2018, 14:20:09
If it's okay with ye_cole and anyone would like to take my GB spot, I could use the money elsewhere at the moment.
Or if anyone else wants to drop out, send me a Pm please! :)
Edit: done
Post by: DillonHightower on Wed, 07 March 2018, 16:46:04
Post by: dallman5 on Wed, 07 March 2018, 18:36:43
Edit: Pending!
Post by: Rak8886 on Wed, 07 March 2018, 18:50:38
Post by: trikoi00 on Thu, 08 March 2018, 00:15:25
I have an spot I want to let go, pm me n we can work it out.
Sent from my iPhone using Tapatalk
Post by: Puddsy on Thu, 08 March 2018, 01:18:32
Post by: trikoi00 on Thu, 08 March 2018, 06:57:03
Just remember that transferring GB slots is very risky (unless done through the GB runner), since there ins't a physical good being sold.yea.. if deal is make, would like to involve GB runner to refund n invoice. Safer and easier.
Post by: DillonHightower on Thu, 08 March 2018, 15:26:23
Just remember that transferring GB slots is very risky (unless done through the GB runner), since there ins't a physical good being sold.
Just remember that transferring GB slots is very risky (unless done through the GB runner), since there ins't a physical good being sold.yea.. if deal is make, would like to involve GB runner to refund n invoice. Safer and easier.
I agree, That is why cole needs to respond to pm asap . Trying to transfer goods and I need him to get involved! @ye_cole
Post by: LevelSteam on Thu, 08 March 2018, 16:48:09
Post by: Evilocity on Wed, 14 March 2018, 17:37:59
molds done first set of caps with new molds (black and white, samples havent been approved yet) will come through in a week.It's been more than a week, any updates sir?
Sent from my SM-G930W8 using Tapatalk
Post by: online on Thu, 15 March 2018, 04:57:49
Post by: Esheu2 on Sun, 18 March 2018, 12:20:30
Post by: punksinatra on Mon, 19 March 2018, 07:00:52
I have a GB spot that I'd like to transfer. If somebody wants in, PM me either on here or on reddit (same username and more likely to answer in a timely fashion)!
You are located where?
Post by: Esheu2 on Mon, 19 March 2018, 19:18:34
I have a GB spot that I'd like to transfer. If somebody wants in, PM me either on here or on reddit (same username and more likely to answer in a timely fashion)!
You are located where?
I'm located in the US (SoCal). I see that you're in Asia so I'm not sure if a GB transfer would be allowed. We can check we ye_cole though
Post by: ye_cole on Mon, 19 March 2018, 23:13:34
Here's a screenshot of my recent conversation. As you can see, it's taking the factory a while, and I'm not sure why.
https://imgur.com/a/5faVu
Also, if you have any transfer requests, PLEASE send them to my reddit account (guess_whos_black) I'm far more active on there. Feel completely free to spam me until i get your thing done by the way.
So, yeah. I'm so so sorry for all the delays, but for some reason the factory just seems to take forever? I'm honestly not sure why, and they haven't really given me a reason either.
Post by: LevelSteam on Tue, 20 March 2018, 09:13:49
So, yeah. I'm so so sorry for all the delays, but for some reason the factory just seems to take forever? I'm honestly not sure why, and they haven't really given me a reason either.
No worries. Pretty much par for the course as far as I'm concerned.
Post by: ye_cole on Tue, 20 March 2018, 19:31:35
"The mold is still in [being adjusted]，[we] have some[stuff] to fix".
Post by: SakeJams on Tue, 20 March 2018, 19:32:50
Post by: Petch on Tue, 20 March 2018, 21:21:28
https://imgur.com/a/QJ3nHYikes
"The mold is still in [being adjusted]，[we] have some[stuff] to fix".
Post by: risk on Wed, 21 March 2018, 00:55:39
EDIT: Updated, set gone
Post by: LevelSteam on Wed, 21 March 2018, 01:09:31
I wonder why they're having these problems with our set but not others :thinking:
They had problems with a couple others recently too didn't they? Lime and something else I believe.
Post by: punksinatra on Wed, 21 March 2018, 21:19:57
Just remember that transferring GB slots is very risky (unless done through the GB runner), since there ins't a physical good being sold.yea.. if deal is make, would like to involve GB runner to refund n invoice. Safer and easier.
replied to your PM
Post by: BearonicMan on Thu, 22 March 2018, 13:23:33
Post by: MeowiWaui on Sat, 24 March 2018, 17:43:59
https://imgur.com/a/QJ3nH
"The mold is still in [being adjusted]，[we] have some[stuff] to fix".
Hey ye_cole! I sent you a message on reddit and also here on GK about an address change on my account since I am moving this next month! I don't want this to get sent to my old address. :P
Shoot me confirmation when you see this or shoot me a pm if you have any questions!
I'm looking forward to this set!
Post by: online on Sat, 24 March 2018, 20:38:50
Post by: SakeJams on Tue, 27 March 2018, 00:47:59
Post by: ye_cole on Tue, 27 March 2018, 16:17:05
Post by: SakeJams on Tue, 27 March 2018, 16:21:17
Post by: MeowiWaui on Wed, 28 March 2018, 14:15:54
So do we even know when they'll be in production? :/
I don't want to answer for ye_cole but I will say is that it appears that Maxkey may be experiencing delays because of molds. There are a couple other GB sets that are also delayed because of mold issues.
Post by: punksinatra on Wed, 28 March 2018, 16:45:31
So do we even know when they'll be in production? :/
I don't want to answer for ye_cole but I will say is that it appears that Maxkey may be experiencing delays because of molds. There are a couple other GB sets that are also delayed because of mold issues.
What other sets are on the pipeline?
Post by: ye_cole on Thu, 29 March 2018, 20:40:02
Quote
So do we even know when they'll be in production? :/
Now we do! :)
Final samples in a week, if those are approved, we have the a-ok for production.
Post by: punksinatra on Thu, 29 March 2018, 21:59:09
https://geekhack.org/index.php?topic=92651.50
And based from their GB info it ran after this GB just wondering why theirs are done already (molds?)
Post by: Vadurr on Fri, 30 March 2018, 02:10:21
Post by: amatecha on Tue, 03 April 2018, 18:40:56
Post by: ye_cole on Wed, 04 April 2018, 09:47:52
Quote
punksinatra, AFAIK ours was delayed a bit because we requested more accurate colors -- the first samples didn't quite nail the colors so we voted to request a more accurate color-match which incurred some delay (plus this was in the midst of Chinese New Year) ... correct me if I'm wrong ye_cole :)
correct. :)
also, if they gave me an accurate timeline, we should be getting sample pictures today or tomorrow.
Post by: ye_cole on Sat, 07 April 2018, 13:49:22
Timing was slightly off. Here's what they've made! :)
Post by: beekey on Sat, 07 April 2018, 14:19:34
The left looks more like a blueish dark grey, not like a dark blue. Looks way of, or is it just me?
The grey I expected to be lighter, but checking pics from the "real" SA set, it might fit.
Post by: Oblotzky on Sat, 07 April 2018, 14:27:59
Show Image(https://i.imgur.com/Swx3bgD.png)
Timing was slightly off. Here's what they've made! :)
Pretty much impossible to say how close this is to the OG set without a direct comparison.
Post by: ye_cole on Sat, 07 April 2018, 14:37:24
Post by: ye_cole on Mon, 09 April 2018, 05:52:59
Post by: sixdeuces on Mon, 09 April 2018, 10:24:26
Post by: MeowiWaui on Mon, 09 April 2018, 16:42:54
Post by: Francisco on Mon, 09 April 2018, 17:51:32
Post by: SakeJams on Mon, 09 April 2018, 17:58:10
Post by: ye_cole on Mon, 09 April 2018, 18:49:33
I'll keep everybody updated. (TLDR: maybe 9 extras in the next 72 hours).
Specifically: 9 people refunded for NA. Asian region may have 1-20 refunds.
Post by: jrfhoutx on Tue, 10 April 2018, 11:28:38
https://gfycat.com/AgileDelectableAyeaye
So, the caps below the color chip are the recent samples they made? what are the caps above the color chips? the previous incorrect color samples?
Post by: Francisco on Tue, 10 April 2018, 13:28:20
Post by: ye_cole on Tue, 10 April 2018, 20:32:22
Quote
So, the caps below the color chip are the recent samples they made? what are the caps above the color chips? the previous incorrect color samples?
Both caps are the same color.
Quote
Cole - Are you still going to China?
I don't think I can make it- I'm sending a close family member to there to transfer in person however. He lives about an hour away from their factory!
Post by: jrfhoutx on Wed, 11 April 2018, 10:22:19
QuoteSo, the caps below the color chip are the recent samples they made? what are the caps above the color chips? the previous incorrect color samples?
Both caps are the same color.
(https://i.imgur.com/tFkalj9.jpg)
1 and 2 are the same color?
Post by: helix999 on Wed, 11 April 2018, 18:27:07
Post by: ye_cole on Wed, 11 April 2018, 20:55:02
Quote
1 and 2 are the same color?
Hmm, I'm fairly positive. That may be different lighting. Regardless, I'll doublecheck with them.
Post by: ye_cole on Thu, 12 April 2018, 09:58:08
https://goo.gl/forms/aVvUIcdP5ggdOUYp2
Post by: lovetree on Thu, 12 April 2018, 10:10:36
If you were refunded by the asian proxy (beamingrobot/monokei) please fill out this form if you would still like to take part in the buy. (you MUST provide verification!)
https://goo.gl/forms/aVvUIcdP5ggdOUYp2
If you are in NA, then an extras/samples form will go up over the weekend for 10 units(the units that were refunded). FCFS. I'll post time 24 hours in advance.
Filled the form!
Post by: Morgan3Wheeler on Thu, 12 April 2018, 14:17:38
Post by: online on Thu, 12 April 2018, 15:15:42
Post by: JamesOFarrell on Thu, 12 April 2018, 15:47:10
Post by: ye_cole on Thu, 12 April 2018, 20:55:41
Quote
I'm willing to part my set to anyone in Europe. The cost will be the same as what I paid (set+shipping) + your shipping.
Hey, I'd recommend waiting until after they ship to part out with yours. It's a bit risky otherwise.
Post by: ye_cole on Thu, 12 April 2018, 21:07:36
Production coming soon! (very soon, i think. I'll keep everyone updated when they reply!)
Post by: ye_cole on Thu, 12 April 2018, 22:03:31
Just Asia.
Post by: Jubileus on Thu, 12 April 2018, 23:10:37
Post by: lovetree on Sun, 15 April 2018, 20:18:40
Is there anyone who got an invoice?
Post by: ye_cole on Sun, 15 April 2018, 22:12:06
Quote
Filled the form but could not receive new invoice.
Is there anyone who got an invoice?
Uhh haven't sent yet. I'm going to give it another day.
Post by: ye_cole on Tue, 17 April 2018, 21:49:52
Post by: YiZZo on Tue, 17 April 2018, 22:40:02
Production started! Done in 20-40 days.
Sent from my iPhone using Tapatalk
Awesome news! Can't wait!
Post by: LevelSteam on Wed, 18 April 2018, 08:53:15
Post by: ye_cole on Wed, 18 April 2018, 09:12:26
Quote
Sorry if this has been answered elsewhere but is the finish on these going to be matte like SA Berserk?
Yep! :)
Post by: Francisco on Wed, 18 April 2018, 10:33:36
Post by: Petch on Wed, 18 April 2018, 11:13:47
I'm glad they're matt - I hate the shiny ones (like SP's) - I love the Maxkey matt finish. Looks way more classy.
They'll go shiny eventually :D I'd rather they just all come shiny so it doesn't get uneven
Post by: Francisco on Wed, 18 April 2018, 11:42:34
They'll go shiny eventually :D I'd rather they just all come shiny so it doesn't get uneven
Maybe if you type 8 hours a day for 5+ years - they'll go shiny...
Not a problem for me :-)
Post by: BearonicMan on Wed, 18 April 2018, 13:21:32
Production started! Done in 20-40 days.
Woooooooooo! Can't wait. Should hopefully be here around the same time that I get my Melody96!
Post by: ye_cole on Wed, 18 April 2018, 13:28:53
Sent from my iPhone using Tapatalk
Post by: JubJubCity on Wed, 18 April 2018, 13:38:38
Post by: Petch on Wed, 18 April 2018, 14:19:32
They'll go shiny eventually :D I'd rather they just all come shiny so it doesn't get uneven
Maybe if you type 8 hours a day for 5+ years - they'll go shiny...
Not a problem for me :-)
That's a very optimistic estimate as to how long abs keeps its texture
Post by: JamesOFarrell on Wed, 18 April 2018, 17:14:24
Post by: ye_cole on Wed, 18 April 2018, 19:55:22
Quote
Hey, I filled out the form as soon as it was posted but never got an invoice. Are they still coming?
Yeah, sorry, i didn't get to them yet. :/
Also, sorry, I miscalculated the probable date for delivery. My new approximate is Mid-June at the max. (i chose 20 days to do my estimates, I should have chosen 40).
Post by: ye_cole on Thu, 19 April 2018, 15:15:28
Post by: JamesOFarrell on Thu, 19 April 2018, 16:02:36
Post by: lovetree on Thu, 19 April 2018, 23:21:43
asian invoices sent! let me know if you did not recieve one please!
Paid!
Post by: ye_cole on Thu, 19 April 2018, 23:38:50
Quote
You sent me someone else invoice as well as my own, I sent you a DM about it.
Fixed this! :)
Quote
Paid!:thumb:
Post by: clorex on Sat, 21 April 2018, 00:09:09
Post by: ye_cole on Sat, 21 April 2018, 00:12:00
Quote
Has anyone else in the Asia GB not received their refunds from Monokei.us yet? It's been a week with no response and I'm not sure if I should get worried.
That's odd! Double check if you're sure that you didn't get it? They said all refunds were processed for all of their customers!
Post by: clorex on Sat, 21 April 2018, 00:47:31
Yeah I just checked; I'm sure. Anyway, I've just tried emailing them again, but this time at their other address.QuoteHas anyone else in the Asia GB not received their refunds from Monokei.us yet? It's been a week with no response and I'm not sure if I should get worried.
That's odd! Double check if you're sure that you didn't get it? They said all refunds were processed for all of their customers!
Post by: ye_cole on Sat, 21 April 2018, 10:31:37
Quote
Yeah I just checked; I'm sure. Anyway, I've just tried emailing them again, but this time at their other address.
Alright man, I hope you get that processed. Sorry about that!
Post by: LevelSteam on Fri, 27 April 2018, 08:56:40
Trying to contemplate what board to pair this with.
Post by: Petch on Fri, 27 April 2018, 08:58:24
Just to confirm, there's no 1.75u shift in here is there?
Trying to contemplate what board to pair this with.
There is indeed a 1.75u shift
Post by: LevelSteam on Fri, 27 April 2018, 09:01:32
Just to confirm, there's no 1.75u shift in here is there?
Trying to contemplate what board to pair this with.
There is indeed a 1.75u shift
Awesome! I couldn't tell if that was a 2u or not. Thanks.
Post by: ye_cole on Mon, 30 April 2018, 19:39:19
Post by: SakeJams on Fri, 04 May 2018, 17:10:41
Post by: ye_cole on Tue, 08 May 2018, 11:57:21
Post by: boogiemanspud on Wed, 09 May 2018, 19:51:32
They told me today that production will be finished in the next week.
Awesome! :D
Post by: ye_cole on Tue, 15 May 2018, 21:22:52
its blue szn
no word on current estimated shipping time to me/candykeys, will let you know AS SOON as i know
production not finished, but yeah
pictures!
Post by: JubJubCity on Tue, 15 May 2018, 21:40:26
https://imgur.com/a/73WfC4D
its blue szn
no word on current estimated shipping time to me/candykeys, will let you know AS SOON as i know
Looks amazing and on point with the colors
Post by: ye_cole on Tue, 15 May 2018, 21:57:10
Quote
Looks amazing and on point with the colors
i'm really glad that it came out like this, it makes the wait feel SO worth it haha
Post by: beekey on Wed, 16 May 2018, 01:28:02
Post by: Vadurr on Wed, 16 May 2018, 02:53:32
Post by: Petch on Wed, 16 May 2018, 04:56:59
Post by: Francisco on Wed, 16 May 2018, 05:34:21
Seem to be a lot of keycaps missing from the photos
Very true - I was thinking exactly the same thing...
Post by: SakeJams on Wed, 16 May 2018, 06:34:56
Post by: ye_cole on Wed, 16 May 2018, 08:20:02
Quote
Seem to be a lot of keycaps missing from the photos
Quote
Very true - I was thinking exactly the same thing...
Quote
Yeah what's up with the missing caps????
Hey, thanks for asking! They said that they can't provide pictures of the full kit just yet when I asked about the missing keycaps, as they still haven't completely finished production.
Post by: BearonicMan on Wed, 16 May 2018, 15:02:24
Post by: MeowiWaui on Thu, 17 May 2018, 09:49:17
QuoteLooks amazing and on point with the colors
i'm really glad that it came out like this, it makes the wait feel SO worth it haha
It was worth it!
Thanks for sticking through this to make sure the colors were correct.
As always great job on your communication and transparency as well.
Really excited to get this set.
Post by: amatecha on Thu, 17 May 2018, 12:41:11
Post by: KevlarBear on Thu, 17 May 2018, 12:42:48
Post by: ARSLOCK on Thu, 17 May 2018, 13:27:34
Post by: ye_cole on Tue, 22 May 2018, 21:26:46
hey guys! its done! Give me 2 weeks-ish to recieve the set and 10-12 days to ship it all out. But it's done, and should be in your hands shortly. :)
Post by: Vadurr on Tue, 22 May 2018, 21:30:24
https://imgur.com/a/WDZcVjE
hey guys! its done! Give me 2 weeks-ish to recieve the set and 10-12 days to ship it all out. But it's done, and should be in your hands shortly. :)
wootwoot :thumb:
Post by: SakeJams on Wed, 23 May 2018, 01:41:39
Post by: Petch on Wed, 23 May 2018, 03:24:50
Post by: LevelSteam on Wed, 23 May 2018, 15:04:24
Post by: ye_cole on Fri, 25 May 2018, 23:09:44
Quote
Are some shipping directly to Candykeys or do you get them, then ship them to CK?
Sorry, shipping is proving to be more complicated than I expected.
Tentative answer: some will be going directly to CK, but i'm not 100% certain. I've been trying to work it out for the past couple days.
The factory wants us to provide our own shipping via a logistics company, but I'm trying to insist that they ship it via DHL and invoice us the fee for shipping.
If that falls through, I'm going to have somebody I trust personally go, pay for the sets, (only half has been paid so far) and ship the boxes to CK and I.
Post by: Hokabuki on Sat, 26 May 2018, 01:32:20
Where are they located?QuoteAre some shipping directly to Candykeys or do you get them, then ship them to CK?
Sorry, shipping is proving to be more complicated than I expected.
Tentative answer: some will be going directly to CK, but i'm not 100% certain. I've been trying to work it out for the past couple days.
The factory wants us to provide our own shipping via a logistics company, but I'm trying to insist that they ship it via DHL and invoice us the fee for shipping.
If that falls through, I'm going to have somebody I trust personally go, pay for the sets, (only half has been paid so far) and ship the boxes to CK and I.
Post by: ye_cole on Sun, 27 May 2018, 11:30:57
I'll have to double check if this is the actual location, but this is where they sent the invoice from.
Its either here or in guangdong. I'll double check and let you know.
Post by: TanHin on Sun, 27 May 2018, 21:12:37
Invoice # 0154
Post by: ye_cole on Sun, 27 May 2018, 21:21:41
Post by: ye_cole on Mon, 28 May 2018, 20:36:04
Post by: Hokabuki on Tue, 29 May 2018, 01:01:57
After some careful deliberation, I've decided to ship to me and then candykeys. I don't want to have anything go wrong when the DHL pickup occurs.When are you thinking US buyers will start receiving sets?
Post by: JubJubCity on Fri, 01 June 2018, 09:53:56
Good question :thumb:After some careful deliberation, I've decided to ship to me and then candykeys. I don't want to have anything go wrong when the DHL pickup occurs.When are you thinking US buyers will start receiving sets?
Post by: elightcap on Tue, 05 June 2018, 18:10:45
Post by: ye_cole on Tue, 05 June 2018, 21:50:12
Quote
When are you thinking US buyers will start receiving sets?
I'd say I should have at least half, if not more, shipped in 3 weeks.
They're on their way to me as we speak: DHL air freight gave me an ETA of 10 business days left.
Post by: JubJubCity on Wed, 06 June 2018, 00:27:37
NiceQuoteWhen are you thinking US buyers will start receiving sets?
I'd say I should have at least half, if not more, shipped in 3 weeks.
They're on their way to me as we speak: DHL air freight gave me an ETA of 10 business days left.
Post by: ye_cole on Wed, 13 June 2018, 17:15:05
I'm having issues setting up an account on DHL to pay. When i placed the order, they didn't mention payment, and i assumed that the original estimate would hold and that payment for shipping would take place on delivery. I wanted to make sure, so i called them afterwards, and they told me I had to cancel and create a business account, which I'm currently doing. it's been a week of me following up with them to create the account, and the specific two agents are never there when I call. so unfortunately, it may take longer than expected to get here. i'm looking into alternative door to door shipping options, such as sino shipping. the keycaps are perfectly fine at the warehouse- don't worry. the only issue is setting up door to door shipping.
I hope to have things figured out by this friday and a paid for order placed by the end of the week, but im not 100% sure that'll happen.
I'll keep you guys updated.
Once again, I'm really sorry for the delays.
Post by: JubJubCity on Wed, 13 June 2018, 18:02:15
hey guys, i just wanted to let you know that there's going to be a delay again.Thanks for the update, really appreciate it. Any news is better than no news :thumb:
I'm having issues setting up an account on DHL to pay. When i placed the order, they didn't mention payment, and i assumed that the original estimate would hold and that payment for shipping would take place on delivery. I wanted to make sure, so i called them afterwards, and they told me I had to cancel and create a business account, which I'm currently doing. it's been a week of me following up with them to create the account, and the specific two agents are never there when I call. so unfortunately, it may take longer than expected to get here. i'm looking into alternative door to door shipping options, such as sino shipping. the keycaps are perfectly fine at the warehouse- don't worry. the only issue is setting up door to door shipping.
I hope to have things figured out by this friday and a paid for order placed by the end of the week, but im not 100% sure that'll happen.
I'll keep you guys updated.
Once again, I'm really sorry for the delays.
Post by: JubJubCity on Fri, 22 June 2018, 00:31:58
Post by: ye_cole on Sun, 24 June 2018, 16:30:39
Post by: JubJubCity on Sun, 24 June 2018, 20:00:26
Hey guys! Sorry for the lack of updates for a while. I didn't want to say anything until I had it confirmed. I've been working with DHL for the last 2 weeks. However, since they're taking a while to let me pay them (I can place an order, but they won't let me pay them without a business account- the setup for that has been taking a while, although it should be finalized monday). I don't want to wait that long, so I'm asking the people at kono (kono.store) if I can have them use their account to ship the sets instead. I'll have a definte solution worked out by the end of monday. (24-ish hours from now).Sounds good, will hope for good news Tuesday morning :thumb:
Post by: ye_cole on Mon, 25 June 2018, 21:34:22
it'll be shipped from china to their warehouse in utah, and they're going to ship it out to you all, including international customers.
:)
Post by: JubJubCity on Mon, 25 June 2018, 21:37:51
they're going to ship it!Wow sounds almost too good to be true lol ;)
it'll be shipped from china to their warehouse in utah, and they're going to ship it out to you all, including international customers.
:)
Post by: YiZZo on Mon, 25 June 2018, 21:45:44
Post by: beekey on Tue, 26 June 2018, 00:18:28
I payed the higher price at candykeys (which was supposed to incl. taxes) and now taxes on top?
I hope this is not the case.
Post by: KevlarBear on Tue, 26 June 2018, 02:45:38
Post by: Petch on Tue, 26 June 2018, 03:08:39
They are sending it out to Europe/Germany too? So I have to pay taxes?This. The whole idea of a European proxy is we don't get double hit by taxes (already paid VAT on Candykeys store)
I payed the higher price at candykeys (which was supposed to incl. taxes) and now taxes on top?
I hope this is not the case.
Post by: omgthisnoise on Tue, 26 June 2018, 15:08:57
Post by: ye_cole on Tue, 26 June 2018, 18:47:11
Quote
They are sending it out to Europe/Germany too? So I have to pay taxes?
I payed the higher price at candykeys (which was supposed to incl. taxes) and now taxes on top?
I hope this is not the case.
Sorry, that's a misunderstanding.
Do not worry, candykeys will still be shipping the EU units.
You're not going to have to pay double tax, sorry for the confusion.
Post by: beekey on Wed, 27 June 2018, 00:40:40
QuoteThey are sending it out to Europe/Germany too? So I have to pay taxes?
I payed the higher price at candykeys (which was supposed to incl. taxes) and now taxes on top?
I hope this is not the case.
Sorry, that's a misunderstanding.
Do not worry, candykeys will still be shipping the EU units.
You're not going to have to pay double tax, sorry for the confusion.
Thanks for the clarification. :thumb: Looking forward to the set. ;D
Post by: zabuza1997 on Wed, 27 June 2018, 05:44:33
Post by: ye_cole on Thu, 28 June 2018, 12:33:31
Post by: LevelSteam on Thu, 28 June 2018, 13:19:57
Post by: beekey on Tue, 03 July 2018, 00:50:15
Post by: ye_cole on Tue, 03 July 2018, 14:36:52
In light of recent events:
You can contact me at Reddit (preferred) under u/guess_whos_black.
On discord at: saturatedfat#9001
and (please contact me on Reddit or discord before this) email me at ghb8745 AT gmail
Post by: ye_cole on Tue, 03 July 2018, 23:07:42
Post by: YiZZo on Sat, 07 July 2018, 10:30:15
Post by: JubJubCity on Sat, 07 July 2018, 11:11:27
Shipment going out to their warehouse today or tomorrow- after it arrives there, ETA for all US/everybody but EU orders is 15 days.Fantastic can't wait
Post by: ye_cole on Tue, 10 July 2018, 16:15:35
Post by: YiZZo on Tue, 10 July 2018, 16:27:34
https://imgur.com/a/QuOhNau. :D
heck yea! Can't wait! now to put together my melody96.
Post by: PurpleURP on Thu, 19 July 2018, 08:51:21
https://imgur.com/a/QuOhNau. :D
super ready
Post by: ye_cole on Thu, 19 July 2018, 10:37:38
Post by: Hokabuki on Thu, 19 July 2018, 13:55:09
When it ships, unless you're in the EU (I don't know if candykeys does tracking numbers), you're going to receive tracking numbers from kono.store via email.Is it still looking like it’ll ship to customers in the next few days?
Post by: ye_cole on Thu, 19 July 2018, 15:41:40
Post by: ye_cole on Thu, 19 July 2018, 19:50:11
Post by: KevlarBear on Thu, 19 July 2018, 20:01:47
Post by: ye_cole on Fri, 20 July 2018, 17:01:40
Post by: ye_cole on Fri, 20 July 2018, 17:02:27
Post by: Francisco on Fri, 20 July 2018, 18:52:45
we're figuring out how much it'll be for EU atm to ship everything over to candykeys.
With all due respect...
Your shipping costs don't affect Candykeys customers - so why even mention it?
I hope there's no further delays to the Candykeys shipment while you're "figuring it out".
Thanks for your efforts.
Post by: HotRoderX on Fri, 20 July 2018, 19:21:45
we're figuring out how much it'll be for EU atm to ship everything over to candykeys.
With all due respect...
Your shipping costs don't affect Candykeys customers - so why even mention it?
I hope there's no further delays to the Candykeys shipment while you're "figuring it out".
Thanks for your efforts.
I am sure they mentioned it for transparency reasons. I was a EU customer I personally wonder what was up. NA getting updates least they could say is nothing to report on EU side. Least this way there setting a expectation for EU customers. Letting them know things might be slightly delayed while they work out shipping the product oversea's to them from the United States.
Post by: SakeJams on Fri, 27 July 2018, 12:06:56
Post by: SakeJams on Mon, 30 July 2018, 19:10:36
Post by: ye_cole on Mon, 30 July 2018, 19:58:57
Post by: online on Tue, 31 July 2018, 13:09:45
I'm selling mine, PM if anyone interested.
Post by: Francisco on Tue, 31 July 2018, 15:29:24
Has anyone, anywhere received anything yet?
Post by: outsider on Tue, 31 July 2018, 16:14:53
Post by: Francisco on Wed, 01 August 2018, 03:03:00
Post by: omgthisnoise on Wed, 01 August 2018, 03:11:37
I've got a bad feeling about this - it's not looking good. The poor communication says "You've been screwed".
I wouldn't be so fast. Delays happen and are nothing new in this scene. So I guess we stay calm for a little bit longer and let ye_cole do his thing.
Post by: Francisco on Wed, 01 August 2018, 03:52:57
Post by: beekey on Wed, 01 August 2018, 06:40:26
The reason why I buy from kbdfans again anytime, is because they handle errors damn well and are transparent about it. kprepublic is the opposide, never again.
Same here, too many vague excuses give a bad vibe and will destroy reputation and future business.
Post by: neoCobweb on Wed, 01 August 2018, 07:01:37
waiting for kono to reply on discord papi- ive messaged them twice, thurs and satHe sent us this 1 day ago. Honestly completely ridiculous to accuse him of scamming after an update 1 day ago where he says he is waiting for an update from the shipping company. We have been updated with the reasons behind the delays all along. Some may be vague but I think you may be a little pessimistic. I'm not sure what else he is supposed to say except "currently in customs" and "waiting on update from shipper". We're in the last stretch and shouldn't have any more delays after this one. Atleast wait for a week or two without updates before making accusations.
Post by: Francisco on Wed, 01 August 2018, 09:51:59
We only got begrudgingly cryptic "updates" after multiple customers asked.
I really don't need to smell a rotten fish for one or two more weeks to know if it stinks or not.
The only people defending his actions and "updates" are those with no sense of smell.
Post by: beekey on Wed, 01 August 2018, 10:13:34
It is frustrating for me too and I think this could have been handled much better. Good communication is king.
As we can't do much beside expressing our concerns, lets wait and keep fingers crossed.
Post by: KevlarBear on Wed, 01 August 2018, 10:22:04
Post by: PurpleURP on Wed, 01 August 2018, 11:17:40
ye_cole’s communication has been really good and transparent all throughout this process. Be patient, things go wrong, delays happen every time, specially when it comes to customs and such. If waiting this long bothers you so much, maybe small group buys are not for you.
for real, ye_cole just updated on the 30th. we are still two weeks from his 8/12 estimate. Not sure why people are fussing. This is all part of being in a group buy.
Post by: ye_cole on Wed, 01 August 2018, 11:26:42
Post by: ye_cole on Wed, 01 August 2018, 21:59:37
Quote
I was talking to the warehouse today and they have gotten the shipment but are having a technical issue receiving the keycaps. We're working on the solution and I'm hoping they will finish receiving tomorrow.
Will update you tomorrow with more
Stay tuned!
Post by: elightcap on Thu, 02 August 2018, 10:50:28
Hey guys, latest update:QuoteI was talking to the warehouse today and they have gotten the shipment but are having a technical issue receiving the keycaps. We're working on the solution and I'm hoping they will finish receiving tomorrow.
Will update you tomorrow with more
Stay tuned!
Im not sure what other people are talking about, but i feel like communications has been very transparent for this. Yes there were delays but it's a group buy, theres always delays. Thanks ye_
Post by: outsider on Thu, 02 August 2018, 15:03:04
Hey guys, latest update:QuoteI was talking to the warehouse today and they have gotten the shipment but are having a technical issue receiving the keycaps. We're working on the solution and I'm hoping they will finish receiving tomorrow.
Will update you tomorrow with more
Stay tuned!
Im not sure what other people are talking about, but i feel like communications has been very transparent for this. Yes there were delays but it's a group buy, theres always delays. Thanks ye_
Same. Perhaps not used to GBs?
Post by: funkybeat7 on Thu, 02 August 2018, 16:17:42
Post by: Puddsy on Thu, 02 August 2018, 21:29:57
Post by: SakeJams on Thu, 02 August 2018, 21:48:16
ignore this postWhy
Post by: Puddsy on Thu, 02 August 2018, 21:58:22
ignore this postWhy
cause i posted some stupid **** and would like to pretend that i didn't
Post by: SakeJams on Thu, 02 August 2018, 21:59:11
Oh ok well I didn't see it so it's ok 🤠ignore this postWhy
cause i posted some stupid **** and would like to pretend that i didn't
Post by: MeowiWaui on Fri, 03 August 2018, 14:05:07
At the last minute he decided to ship the caps to Kono - a 3rd party who now apparently ignore him or don't answer his two messages. Like its our problem now? Should we call Kono ourselves to find out what's going on?
We only got begrudgingly cryptic "updates" after multiple customers asked.
I really don't need to smell a rotten fish for one or two more weeks to know if it stinks or not.
The only people defending his actions and "updates" are those with no sense of smell.
First, ye_cole has been transparent and open with communication since this GB inception. Above, after he updated us about CandyKeys shipment, you said, "Your shipping costs don't affect Candykeys customers - so why even mention it?"
And then later you start complaining that he isn't communicating. So what is it? Do you want communication or not?
Second, it would be crazy to think that he would go through all of this trouble running this GB, getting the keycaps manufactured only to scam everyone out of their money. Plus, ye_cole already has another GB lined up over at input.club and you can see his next set at the KONO store: https://kono.store/products/sa-royalty-keycap-set ... You really think he is going to screw people over when he has another Group Buy lined up?
Third, multiple delays are expected during a Group Buy. This is nothing new. During Signature Plastics Group Buys, people have waited YEARS.
If you can't be patient, then Group Buys are not for you.
Post by: Francisco on Fri, 03 August 2018, 18:03:02
First, ye_cole has been transparent and open with communication since this GB inception. Above, after he updated us about CandyKeys shipment, you said, "Your shipping costs don't affect Candykeys customers - so why even mention it?"
And then later you start complaining that he isn't communicating. So what is it? Do you want communication or not?
Second, it would be crazy to think that he would go through all of this trouble running this GB, getting the keycaps manufactured only to scam everyone out of their money. Plus, ye_cole already has another GB lined up over at input.club and you can see his next set at the KONO store: https://kono.store/products/sa-royalty-keycap-set ... You really think he is going to screw people over when he has another Group Buy lined up?
Third, multiple delays are expected during a Group Buy. This is nothing new. During Signature Plastics Group Buys, people have waited YEARS.
If you can't be patient, then Group Buys are not for you.
First, "I'm [only just now] figuring out shipping costs to Candykeys" - is not an update.
Who cares what his shipping costs are?
Second, by his own admission, Kona (a US storefront) ignores the guy.
Why would he do another GB with them?
Third, Manufacturing delays are understood.
Logistical delays due to incompetence and bad planning for months is not.
I hope that clarifies my position.
Thank you.
Post by: jrfhoutx on Fri, 03 August 2018, 22:06:12
First, ye_cole has been transparent and open with communication since this GB inception. Above, after he updated us about CandyKeys shipment, you said, "Your shipping costs don't affect Candykeys customers - so why even mention it?"
And then later you start complaining that he isn't communicating. So what is it? Do you want communication or not?
Second, it would be crazy to think that he would go through all of this trouble running this GB, getting the keycaps manufactured only to scam everyone out of their money. Plus, ye_cole already has another GB lined up over at input.club and you can see his next set at the KONO store: https://kono.store/products/sa-royalty-keycap-set ... You really think he is going to screw people over when he has another Group Buy lined up?
Third, multiple delays are expected during a Group Buy. This is nothing new. During Signature Plastics Group Buys, people have waited YEARS.
If you can't be patient, then Group Buys are not for you.
First, "I'm [only just now] figuring out shipping costs to Candykeys" - is not an update.
Who cares what his shipping costs are?
Second, by his own admission, Kona (a US storefront) ignores the guy.
Why would he do another GB with them?
Third, Manufacturing delays are understood.
Logistical delays due to incompetence and bad planning for months is not.
I hope that clarifies my position.
Thank you.
logistical delays should be expected for someones first group buy. those are the things you figure out and learn in your first buy that make all your subsequent buys go much more smoothly.
honestly, of the many group buys I've participated in and witnessed from the sidelines, this is one of the better ones. well planned, and well communicated to participants, even with all the little speedbumps and hiccups.
have I been in better ones? yeah sure, but those have all been from more experienced runners. have I been in worse ones? yeah, and those were all with experienced runners...
Post by: Francisco on Sat, 04 August 2018, 05:59:36
they have gotten the shipment but are having a technical issue receiving the keycaps.
We're working on the solution and I'm hoping they will finish receiving tomorrow.
Will update you tomorrow with more
How did they "get the shipment" but still have an issue "receiving the keycaps"?
"will update you tomorrow"... that was 4 days ago.
Post by: ye_cole on Sun, 05 August 2018, 01:28:02
Also, small update- not sure if I mentioned on the thread yet, but David from CK is working with kono directly to coordinate EU shipping now.
Post by: boogiemanspud on Mon, 06 August 2018, 07:11:50
Hello! I just relayed what kono told me on discord. That was quote from them. I apologize, but there hasn't been any update yet, so I haven't posted a new one. I'm really sorry everyone doesnt have their caps yet, but I'm doing everything I can. I've also followed up again earlier today.
Also, small update- not sure if I mentioned on the thread yet, but David from CK is working with kono directly to coordinate EU shipping now.
Thanks for the update! Remember guys, CALM depths. It's coming to gether and I know everyone, me included, is anxious to get a new set of keycaps. It's gonna happen, just need some patience at this point.
I was involved in the amazing chocolatier buy on massdrop and it took longer than this with less transparency. It's just kind of the nature of group buys, there are almost always unexpeced delays and amounts of frustration here and there.
Post by: ye_cole on Thu, 09 August 2018, 10:49:21
Small update:
Here's what's going on with the kono situation:
https://imgur.com/a/MAc800m
TL;DR: Shipment has arrived at warehouse, but person in charge of coordinating warehouse affairs hasn't been responding for some reason. I apologize for the delay, and hopefully we should have it figured out as soon as he responds.
Post by: pvd on Thu, 09 August 2018, 21:14:51
Post by: Francisco on Fri, 10 August 2018, 00:41:14
May 22 - "Give me 2 weeks to receive the set and 10-12 days to ship it all out"
May 28 - "After careful deliberation, I've decided to ship to me then candykeys. I don't want anything to go wrong."
June 5 - "I should have at least half, if not more shipped in 3 weeks"
June 13 - "delay again - I'm having issues setting up an account on DHL"
June 24 - "DHL taking a while to setup account - don't want to wait - so I'm asking kono.store if I can use their account to ship the sets instead."
July 3 - "ETA for all US/everybody but EU orders is 15 days"
July 19 - "When it ships you're going to receive tracking numbers from kono.store"
July 20 - "NA orders should start shipping next Friday (July 27)"
July 30 - "waiting for kono to reply - I've messaged them twice"
August 1 - "they got the shipment but have a technical issue receiving the keyscaps"?!?!
August 9 - "kono hasn't been responding for some reason"
Go figure...
Post by: SakeJams on Fri, 10 August 2018, 02:42:25
The story so far...You already said you're selling your set, what's the point of complaining any further lmao
May 22 - "Give me 2 weeks to receive the set and 10-12 days to ship it all out"
May 28 - "After careful deliberation, I've decided to ship to me then candykeys. I don't want anything to go wrong."
June 5 - "I should have at least half, if not more shipped in 3 weeks"
June 13 - "delay again - I'm having issues setting up an account on DHL"
June 24 - "DHL taking a while to setup account - don't want to wait - so I'm asking kono.store if I can use their account to ship the sets instead."
July 3 - "ETA for all US/everybody but EU orders is 15 days"
July 19 - "When it ships you're going to receive tracking numbers from kono.store"
July 20 - "NA orders should start shipping next Friday (July 27)"
July 30 - "waiting for kono to reply - I've messaged them twice"
August 1 - "they got the shipment but have a technical issue receiving the keyscaps"?!?!
August 9 - "kono hasn't been responding for some reason"
Go figure...
Post by: Puddsy on Fri, 10 August 2018, 05:21:32
The story so far...
May 22 - "Give me 2 weeks to receive the set and 10-12 days to ship it all out"
May 28 - "After careful deliberation, I've decided to ship to me then candykeys. I don't want anything to go wrong."
June 5 - "I should have at least half, if not more shipped in 3 weeks"
June 13 - "delay again - I'm having issues setting up an account on DHL"
June 24 - "DHL taking a while to setup account - don't want to wait - so I'm asking kono.store if I can use their account to ship the sets instead."
July 3 - "ETA for all US/everybody but EU orders is 15 days"
July 19 - "When it ships you're going to receive tracking numbers from kono.store"
July 20 - "NA orders should start shipping next Friday (July 27)"
July 30 - "waiting for kono to reply - I've messaged them twice"
August 1 - "they got the shipment but have a technical issue receiving the keyscaps"?!?!
August 9 - "kono hasn't been responding for some reason"
Go figure...
If you joined a GB without expecting delays then you shouldn't have joined a GB
Post by: Pwner on Fri, 10 August 2018, 05:31:26
The story so far...
May 22 - "Give me 2 weeks to receive the set and 10-12 days to ship it all out"
May 28 - "After careful deliberation, I've decided to ship to me then candykeys. I don't want anything to go wrong."
June 5 - "I should have at least half, if not more shipped in 3 weeks"
June 13 - "delay again - I'm having issues setting up an account on DHL"
June 24 - "DHL taking a while to setup account - don't want to wait - so I'm asking kono.store if I can use their account to ship the sets instead."
July 3 - "ETA for all US/everybody but EU orders is 15 days"
July 19 - "When it ships you're going to receive tracking numbers from kono.store"
July 20 - "NA orders should start shipping next Friday (July 27)"
July 30 - "waiting for kono to reply - I've messaged them twice"
August 1 - "they got the shipment but have a technical issue receiving the keyscaps"?!?!
August 9 - "kono hasn't been responding for some reason"
Go figure...
If you joined a GB without expecting delays then you shouldn't have joined a GB
This might be one of the most idiotic things I've ever heard.
Nice.
Post by: xZ3ROx on Fri, 10 August 2018, 07:49:57
The story so far...Issue this guy a refund and be done with it. Dude is toxic.
May 22 - "Give me 2 weeks to receive the set and 10-12 days to ship it all out"
May 28 - "After careful deliberation, I've decided to ship to me then candykeys. I don't want anything to go wrong."
June 5 - "I should have at least half, if not more shipped in 3 weeks"
June 13 - "delay again - I'm having issues setting up an account on DHL"
June 24 - "DHL taking a while to setup account - don't want to wait - so I'm asking kono.store if I can use their account to ship the sets instead."
July 3 - "ETA for all US/everybody but EU orders is 15 days"
July 19 - "When it ships you're going to receive tracking numbers from kono.store"
July 20 - "NA orders should start shipping next Friday (July 27)"
July 30 - "waiting for kono to reply - I've messaged them twice"
August 1 - "they got the shipment but have a technical issue receiving the keyscaps"?!?!
August 9 - "kono hasn't been responding for some reason"
Go figure...
Sent from my Pixel 2 XL using Tapatalk
Post by: Francisco on Fri, 10 August 2018, 09:42:54
Post by: funkybeat7 on Fri, 10 August 2018, 10:36:37
Sent from my iPhone using Tapatalk
Post by: ye_cole on Fri, 10 August 2018, 14:22:26
Quote
The caps were manufactured 3 months ago. So, what's the "delay" about?
You've outlined the timeline, and I've told everyone everything that's been going on as soon as I knew. I, however, should not have promised delivery dates before I was 100% sure that they could be fulfilled.
Quote
Just email ye_cole personally. It seems you're one of the few if not the only one with a similar opinion and it's annoying seeing this discussion in this thread. I'm just waiting patiently for updates on the GB
Pretty sure he's an EU customer. If that's the case, he'd have to talk to candykeys. If not, he's welcome to shoot me an email.
Post by: KevlarBear on Fri, 10 August 2018, 19:16:49
Issue this guy a refund and be done with it. Dude is toxic.
Right? I'm sure there are a lot of people looking to get in on any extras
Post by: ye_cole on Fri, 10 August 2018, 20:30:36
Issue this guy a refund and be done with it. Dude is toxic.
Right? I'm sure there are a lot of people looking to get in on any extras
@Fransisco, if you'd like a refund, then I can give you one. Shoot me your email please.
Post by: zabuza1997 on Fri, 10 August 2018, 20:51:21
Post by: ye_cole on Tue, 14 August 2018, 18:45:30
Post by: JubJubCity on Tue, 14 August 2018, 19:08:59
Hey guys, finally checked in with Kono. Looks like they were able to check in all the packages- finished this morning. Packages will start to be shipped out in two days. I'll check up with David and ask him how things are on his end.Fantastic!!!!!!!!!!!!!!! :cool:
Post by: Bizpit on Tue, 14 August 2018, 19:09:28
Post by: cijanzen on Tue, 14 August 2018, 20:04:42
Post by: SakeJams on Tue, 14 August 2018, 20:07:44
Hey guys, finally checked in with Kono. Looks like they were able to check in all the packages- finished this morning. Packages will start to be shipped out in two days. I'll check up with David and ask him how things are on his end.Can't wait! Dunno if this has been asked before, but how will shipping notifications/tracking work?
Post by: ye_cole on Tue, 14 August 2018, 20:09:25
Quote
Does this mean we can start SA Royalty soon!?
that's next! and a keyboard too
i'll ask them about Royalty after I pay for the shipping fees (I pay for shipping after the fact).
Tooling should be done, but not sure.
Quote
Can't wait! Dunno if this has been asked before, but how will shipping notifications/tracking work?
They'll email it to you guys!
Also, there will not be any extras. Two orders were lost in transit, so even I'm not getting any.
Post by: elightcap on Thu, 16 August 2018, 12:13:54
Post by: ye_cole on Thu, 16 August 2018, 12:36:03
offers up boyes
Post by: gt1989 on Thu, 16 August 2018, 12:41:39
Hey guys! Unfortunately, due to sets going missing in shipment, we have a one unit defecit. I'd rather avoid having maxkey ship that one set from overseas- it will take A WHILE, and will probably severely delay someone's order- and I don't want any more delays.
So, as an alternative option, if anyone was going to sell their set when it arrives- I'd be willing to "purchase" your set for 190 USD. If anyone would like to go though with this, please PM me your email!
I just sent you a pm.
Post by: xZ3ROx on Thu, 16 August 2018, 13:32:41
Hey guys! Unfortunately, due to sets going missing in shipment, we have a one unit defecit. I'd rather avoid having maxkey ship that one set from overseas- it will take A WHILE, and will probably severely delay someone's order- and I don't want any more delays.Where's that Francisco guy...
So, as an alternative option, if anyone was going to sell their set when it arrives- I'd be willing to "purchase" your set for 190 USD. If anyone would like to go though with this, please PM me your email!
Sent from my Pixel 2 XL using Tapatalk
Post by: SakeJams on Thu, 16 August 2018, 14:19:39
lmaoooHey guys! Unfortunately, due to sets going missing in shipment, we have a one unit defecit. I'd rather avoid having maxkey ship that one set from overseas- it will take A WHILE, and will probably severely delay someone's order- and I don't want any more delays.Where's that Francisco guy...
So, as an alternative option, if anyone was going to sell their set when it arrives- I'd be willing to "purchase" your set for 190 USD. If anyone would like to go though with this, please PM me your email!
Sent from my Pixel 2 XL using Tapatalk
Post by: ye_cole on Thu, 16 August 2018, 17:04:57
Quote
Where's that Francisco guy...
Fr tho lmao
So, things will be shipping out tomorrow, and you'll get tracking emails when they do. Everything's cataloged into the warehouse and ready to go out.
Post by: SakeJams on Thu, 16 August 2018, 17:15:07
QuoteWhere's that Francisco guy...
Fr tho lmao
So, things will be shipping out tomorrow, and you'll get tracking emails when they do. Everything's cataloged into the warehouse and ready to go out.
Post by: JubJubCity on Thu, 16 August 2018, 18:11:21
Hot Damn can't wait! :thumb:QuoteWhere's that Francisco guy...
Fr tho lmao
So, things will be shipping out tomorrow, and you'll get tracking emails when they do. Everything's cataloged into the warehouse and ready to go out.
Post by: zabuza1997 on Thu, 16 August 2018, 18:25:35
Post by: ye_cole on Thu, 16 August 2018, 20:09:59
Quote
Any news for EU gang? Literally no updates from Candykeys
I'm not sure when he'd like to release information, but as soon as he provides an address verification and VAT number the sets are going out to CK.
Post by: ye_cole on Fri, 17 August 2018, 14:20:01
Post by: SakeJams on Fri, 17 August 2018, 14:22:07
One last update- they are all going out today.
Post by: JubJubCity on Fri, 17 August 2018, 15:23:29
Refreshing email constantly :))One last update- they are all going out today.
Post by: ye_cole on Fri, 17 August 2018, 19:52:05
Post by: Haaaaaandrew on Sat, 18 August 2018, 11:13:02
Post by: SakeJams on Sat, 18 August 2018, 12:24:34
hey guys! you're not going to get a tracking email today, their mail guy has tapped out for the day. if you have a USPS or UPS account, you may want to check for incoming packages to your address- I think they send SMS notifications or the like.So does this mean we're still getting a tracking email from them? I can't get informed deliveries to work for me haha
Post by: online on Sat, 18 August 2018, 13:27:05
Any news for EU gang? Literally no updates from Candykeys
same boat.
emailed David @ CK last week and he said they're still waiting for confirmation form custom.
Post by: ye_cole on Sat, 18 August 2018, 17:24:02
Quote
So does this mean we're still getting a tracking email from them? I can't get informed deliveries to work for me haha
Yeap, you're still getting a tracking email. I'll ask them about when those are going to go out.
Quote
I have something coming from Kono in my informed delivery :thumb: although I'm not sure if it's this or if it's gmk camping. Whatever it is, it's arriving on Monday!
:o
Post by: Haaaaaandrew on Mon, 20 August 2018, 10:51:53
QuoteI have something coming from Kono in my informed delivery :thumb: although I'm not sure if it's this or if it's gmk camping. Whatever it is, it's arriving on Monday!
:o
It has arrived!
(https://i.imgur.com/LyOjAR3.jpg)
Post by: xZ3ROx on Mon, 20 August 2018, 11:21:45
QuoteI have something coming from Kono in my informed delivery :thumb: although I'm not sure if it's this or if it's gmk camping. Whatever it is, it's arriving on Monday!
:o
It has arrived!Show Image(https://i.imgur.com/LyOjAR3.jpg)
Sent from my Pixel 2 XL using Tapatalk
Post by: Haaaaaandrew on Mon, 20 August 2018, 12:39:55
Oh nice! Are those scratches on the spacebar? I'm hoping I get a tracking number today.QuoteI have something coming from Kono in my informed delivery :thumb: although I'm not sure if it's this or if it's gmk camping. Whatever it is, it's arriving on Monday!
:o
It has arrived!Show Image(https://i.imgur.com/LyOjAR3.jpg)
Sent from my Pixel 2 XL using Tapatalk
Post by: Hokabuki on Mon, 20 August 2018, 13:01:48
Are you in the CONUS? I never got a tracking numberQuoteI have something coming from Kono in my informed delivery :thumb: although I'm not sure if it's this or if it's gmk camping. Whatever it is, it's arriving on Monday!
:o
It has arrived!Show Image(https://i.imgur.com/LyOjAR3.jpg)
Post by: JubJubCity on Mon, 20 August 2018, 13:05:25
Looks amazing, can't wait to receive mine. Still no tracking :'(QuoteI have something coming from Kono in my informed delivery :thumb: although I'm not sure if it's this or if it's gmk camping. Whatever it is, it's arriving on Monday!
:o
It has arrived!Show Image(https://i.imgur.com/LyOjAR3.jpg)
Post by: SakeJams on Mon, 20 August 2018, 13:06:10
Post by: Haaaaaandrew on Mon, 20 August 2018, 13:07:24
Are you in the CONUS? I never got a tracking numberQuoteI have something coming from Kono in my informed delivery :thumb: although I'm not sure if it's this or if it's gmk camping. Whatever it is, it's arriving on Monday!
:o
It has arrived!Show Image(https://i.imgur.com/LyOjAR3.jpg)
Post by: YiZZo on Mon, 20 August 2018, 14:51:27
Post by: amatecha on Mon, 20 August 2018, 14:57:53
Post by: PurpleURP on Mon, 20 August 2018, 15:10:39
Post by: boogiemanspud on Mon, 20 August 2018, 15:16:05
Post by: SakeJams on Mon, 20 August 2018, 15:16:11
Post by: JubJubCity on Mon, 20 August 2018, 15:29:25
Oh hey I got my tracking as well! Email went to spam folder for some reason >.> Glad I checked!Thanks for the reminder, just checked my email and it went to promotions for gmail. Arriving Tue, cant wait
Post by: xZ3ROx on Mon, 20 August 2018, 15:44:25
Sent from my Pixel 2 XL using Tapatalk
Post by: SakeJams on Mon, 20 August 2018, 15:53:43
Just got a tracking link and says it delivered today.Better go check that mail
Sent from my Pixel 2 XL using Tapatalk
Post by: xZ3ROx on Mon, 20 August 2018, 15:55:28
Still at workJust got a tracking link and says it delivered today.Better go check that mail
Sent from my Pixel 2 XL using Tapatalk
Sent from my Pixel 2 XL using Tapatalk
Post by: Haaaaaandrew on Mon, 20 August 2018, 15:59:56
Post by: SakeJams on Mon, 20 August 2018, 16:01:03
Glad to see everyone getting their notifications! :thumb: I'm curious if anyone else will have scratches on their spacebar?I hope not! But at the same time, it's a good excuse to get a fancy artisan spacebar
Post by: ye_cole on Mon, 20 August 2018, 16:54:44
Post by: LightningXI on Mon, 20 August 2018, 16:57:51
Please post pictures when you get it! Im really looking forward to seeing your builds.
Are there going to be any extras?
Post by: xZ3ROx on Mon, 20 August 2018, 17:02:04
Sent from my Pixel 2 XL using Tapatalk
Post by: ye_cole on Mon, 20 August 2018, 17:05:43
Quote
Are there going to be any extras?
Sorry! We lost 2 on the way and there were only 200 produced.
Post by: Haaaaaandrew on Mon, 20 August 2018, 17:14:21
No pictures yet but packaging is on point! No scratches on any of the keys on my set.
Sent from my Pixel 2 XL using Tapatalk
Post by: LevelSteam on Mon, 20 August 2018, 17:25:01
Post by: ye_cole on Mon, 20 August 2018, 18:41:43
Post by: YiZZo on Mon, 20 August 2018, 18:44:04
really glad it's finally getting out to you guys! hope you enjoy :)
Thanks for running this GB. I always had faith that you would deliver ;D
Post by: SakeJams on Mon, 20 August 2018, 18:45:43
Post by: elightcap on Mon, 20 August 2018, 18:57:32
TFW u put box switches in your board that these caps are going to
Wait why is this a problem?
Post by: SakeJams on Mon, 20 August 2018, 19:02:27
Box switch stems (aside from the revised versions they're putting out now) are cracking the stems of keycaps and artisans because the horizontal arms are too thickTFW u put box switches in your board that these caps are going to
Wait why is this a problem?
Post by: neoCobweb on Mon, 20 August 2018, 19:20:26
I put a couple or keys from maxkey ninja on a keyboard with box jades that I wasnt using and I checked later to find stretch marks on the stems... I wasnt even using that keyboard. I would be very careful with box switches.Box switch stems (aside from the revised versions they're putting out now) are cracking the stems of keycaps and artisans because the horizontal arms are too thickTFW u put box switches in your board that these caps are going to
Wait why is this a problem?
Sent from my SM-G950W using Tapatalk
Post by: ye_cole on Mon, 20 August 2018, 20:36:11
Quote
TFW u put box switches in your board that these caps are going to
oof pls take it ez theyre babies
Post by: elightcap on Tue, 21 August 2018, 12:20:42
Box switch stems (aside from the revised versions they're putting out now) are cracking the stems of keycaps and artisans because the horizontal arms are too thickTFW u put box switches in your board that these caps are going to
Wait why is this a problem?
Well guess ill just die now.
Post by: elightcap on Tue, 21 August 2018, 12:38:30
Box switch stems (aside from the revised versions they're putting out now) are cracking the stems of keycaps and artisans because the horizontal arms are too thickTFW u put box switches in your board that these caps are going to
Wait why is this a problem?
Well guess ill just die now.
just broke out the calipers and measured every stem on my board. FWIW, mine all seem to be within tolerance specs, so maybe it depends on batch? sorry im sure this conversation has already been had elsewhere, but just my two cents
Post by: SakeJams on Tue, 21 August 2018, 12:40:03
I think it does depend on the batch yeah, if it's an early batch I think they're alright. Though the stems that were breaking caps were also in tolerance range so idkBox switch stems (aside from the revised versions they're putting out now) are cracking the stems of keycaps and artisans because the horizontal arms are too thickTFW u put box switches in your board that these caps are going to
Wait why is this a problem?
just broke out the calipers and measured every stem on my board. FWIW, mine all seem to be within tolerance specs, so maybe it depends on batch? sorry im sure this conversation has already been had elsewhere, but just my two cents
Well guess ill just die now.
Post by: JubJubCity on Tue, 21 August 2018, 14:58:30
Post by: dc_in_sf on Tue, 21 August 2018, 15:58:32
AFAICT from the layout photo, this was supposed to be 2.25u and not 2u
Here is a photo of the key with the same surrounding keys from the keymap
(https://i.imgur.com/GBHbXTV.png)
Harder to tell from the bottom row, but the shift key clearly extends much further into the control key in the layout photo
And no, this is not the 1.75u shift key, it's definitely a 2u shift.
This is a bit of a pain since all my boards are 65->75% form factor and about half of them use a second 2.25u shift key
Post by: PurpleURP on Tue, 21 August 2018, 17:24:56
In the set I received the one of the shift keys is 2u.
AFAICT from the layout photo, this was supposed to be 2.25u and not 2u
Here is a photo of the key with the same surrounding keys from the keymapShow Image(https://i.imgur.com/GBHbXTV.png)
Harder to tell from the bottom row, but the shift key clearly extends much further into the control key in the layout photo
And no, this is not the 1.75u shift key, it's definitely a 2u shift.
This is a bit of a pain since all my boards are 65->75% form factor and about half of them use a second 2.25u shift key
I'm trying to do a GK64 build, i'd be down to trade / buy that 2u shift from you if my kit doesnt come with one.
Post by: Vadurr on Tue, 21 August 2018, 19:53:35
Post by: Jubileus on Wed, 22 August 2018, 00:25:00
though I still haven't received my tracking (and I know to check spam/promotions)
sent you a message regarding this @ye_cole
Post by: KevlarBear on Wed, 22 August 2018, 00:26:34
Post by: MeowiWaui on Wed, 22 August 2018, 01:09:25
Received mine today! Looks amazing, thanks so much for running this ye_cole :thumb:
If your able share some pics of your set on a board! ;D
I don't get mine until Thursday, but I would love to see others sets so far...
Post by: omgthisnoise on Wed, 22 August 2018, 02:58:18
Post by: zabuza1997 on Wed, 22 August 2018, 09:58:40
Any news regarding EU?David told me its gonna ship next monday
Post by: omgthisnoise on Wed, 22 August 2018, 11:00:54
Post by: elightcap on Wed, 22 August 2018, 12:25:35
Post by: dc_in_sf on Wed, 22 August 2018, 14:51:10
(https://i.imgur.com/huT4Hfd.jpg)
You can see the gap around the right shift (the layout requires a 2nd 2.25u shift vs the 2u shift in the kit I received), though it is much obvious from above.
I'd love it if someone who has received their set can confirm the size of the extra not 1.75u shift key (i.e. do you have a 2u or 2.25u shift key)
Post by: Vadurr on Wed, 22 August 2018, 16:23:01
Clueboard with Calm DepthsShow Image(https://i.imgur.com/huT4Hfd.jpg)
You can see the gap around the right shift (the layout requires a 2nd 2.25u shift vs the 2u shift in the kit I received), though it is much obvious from above.
I'd love it if someone who has received their set can confirm the size of the extra not 1.75u shift key (i.e. do you have a 2u or 2.25u shift key)
I most definitely have a 2u shift
Post by: dc_in_sf on Wed, 22 August 2018, 16:44:32
Clueboard with Calm DepthsShow Image(https://i.imgur.com/huT4Hfd.jpg)
You can see the gap around the right shift (the layout requires a 2nd 2.25u shift vs the 2u shift in the kit I received), though it is much obvious from above.
I'd love it if someone who has received their set can confirm the size of the extra not 1.75u shift key (i.e. do you have a 2u or 2.25u shift key)
I most definitely have a 2u shift
Thanks for the confirmation. I was afraid of that. The layout photo shows 2 x 2.25u shift keys AFAICT, I'm wondering what happened?
Post by: jrfhoutx on Wed, 22 August 2018, 17:41:27
[attachimg=1]
Kit looks awesome though, spot on, thanks for a good gb ye_cole!
Post by: pixelpusher on Wed, 22 August 2018, 18:01:36
Post by: ye_cole on Wed, 22 August 2018, 18:42:37
Quote
Extras?
Those won't be available. Sorry!
Quote
Thanks for the confirmation. I was afraid of that. The layout photo shows 2 x 2.25u shift keys AFAICT, I'm wondering what happened?
I'm sorry, I'm not sure what happened. I'll contact maxkey and ask what they can do about it.
Post by: ye_cole on Wed, 22 August 2018, 20:11:26
I'm going to leave this up for two weeks or so and see who needs another 2.25u shift.
Also, unfortunately, I cannot offer these for free- I have to pay shipping on these.
They're going to be 6.50 each, and I apologize that I'm charging again to have a key that was supposed to already be in the set. However, shipping these keys again to you guys individually will be expensive, and I can't afford another round of shipping charges.
Here's the form to enter if you would like a replacement cap. (NOTE: You MUST have been in the original group buy to request another shift.)
You will not be charged until the shifts come in, and I'm not sure when they're coming in. They may take a while.
Also, please do not enter this if you are not in the US without PMing me.
https://goo.gl/forms/jNgeYRXaVs17heEJ2
For the curious, here's what they said
Quote
Shift of 2.25x should only be used by 660 users.
I can make 2.25x shifts, but it will take some time, because I'm making new molds, and I'll send them to you, and you can send them to the buyers in need.
Post by: dc_in_sf on Thu, 23 August 2018, 00:42:55
Hey guys, maxkey said they would offer replacements for free- I'm not sure when they are going to come in, though.
I'm going to leave this up for two weeks or so and see who needs another 2.25u shift.
Also, unfortunately, I cannot offer these for free- I have to pay shipping on these.
They're going to be 6.50 each, and I apologize that I'm charging again to have a key that was supposed to already be in the set. However, shipping these keys again to you guys individually will be expensive, and I can't afford another round of shipping charges.
Here's the form to enter if you would like a replacement cap. (NOTE: You MUST have been in the original group buy to request another shift.)
You will not be charged until the shifts come in, and I'm not sure when they're coming in. They may take a while.
Also, please do not enter this if you are not in the US without PMing me.
https://goo.gl/forms/jNgeYRXaVs17heEJ2
For the curious, here's what they saidQuoteShift of 2.25x should only be used by 660 users.
I can make 2.25x shifts, but it will take some time, because I'm making new molds, and I'll send them to you, and you can send them to the buyers in need.
Thanks for chasing this up ye_cole. I have no problems paying the additional shipping to eventually get a 2.25u shift.
I've already discovered in this hobby that the keyboard you intended to put a set on is not always the keyboard it ends up on, so best to cover your bases. For me that means having a 2.25u and 1.75u right shift option, a control key for the capslock slot and some 1u modifiers for the bottom row (covers all my not very exotic 65-75% boards), so I try to ensure all the sets I buy have that coverage.
Post by: LightningXI on Thu, 23 August 2018, 11:45:37
Post by: SakeJams on Thu, 23 August 2018, 17:37:12
Post by: LevelSteam on Thu, 23 August 2018, 22:04:47
Post by: boogiemanspud on Sat, 25 August 2018, 20:15:10
Post by: ye_cole on Sat, 25 August 2018, 21:02:13
Quote
:)) https://www.massdrop.com/buy/maxkey-sa-f-22-keycap-set looks like maxkey might have had some leftovers! :))
hMM
digging the alphas on this
Post by: mnpq.raven on Mon, 27 August 2018, 09:14:43
Box switch stems (aside from the revised versions they're putting out now) are cracking the stems of keycaps and artisans because the horizontal arms are too thickTFW u put box switches in your board that these caps are going to
Wait why is this a problem?
Hello, first time poster here. Did ye_cole test the stems and how they fit into box switches ? as this set is going to my white box keyboard, would be a shame if it wouldn't fit
Post by: SakeJams on Mon, 27 August 2018, 10:43:58
So I put my calm depths caps on my box switches just to see what they look like on the board, and left them on for maybe 5 hours max and took them off. As I took them off I noticed the majority of the caps had stretch marks on the stems, and they were an incredibly tight fit on the switches. I also decided to leave one cap on a box switch (a cap I'll likely never use) to test out if/when the stem will break. So far it's been about a week and I have seen any actual cracks on the cap stem but there are definitely stretch marks. I make an effort to spam press the switch every day to see how it holds up to being used. I'm uncertain at this point whether or not the cap will actually crack or not, but so far it hasn't so idk. So I suppose if the stretch marks are the worst of the damage to expect, you could always just say screw it and throw them on.Box switch stems (aside from the revised versions they're putting out now) are cracking the stems of keycaps and artisans because the horizontal arms are too thickTFW u put box switches in your board that these caps are going to
Wait why is this a problem?
Hello, first time poster here. Did ye_cole test the stems and how they fit into box switches ? as this set is going to my white box keyboard, would be a shame if it wouldn't fit
Post by: Hokabuki on Mon, 27 August 2018, 10:50:31
So I put my calm depths caps on my box switches just to see what they look like on the board, and left them on for maybe 5 hours max and took them off. As I took them off I noticed the majority of the caps had stretch marks on the stems, and they were an incredibly tight fit on the switches. I also decided to leave one cap on a box switch (a cap I'll likely never use) to test out if/when the stem will break. So far it's been about a week and I have seen any actual cracks on the cap stem but there are definitely stretch marks. I make an effort to spam press the switch every day to see how it holds up to being used. I'm uncertain at this point whether or not the cap will actually crack or not, but so far it hasn't so idk. So I suppose if the stretch marks are the worst of the damage to expect, you could always just say screw it and throw them on.Box switch stems (aside from the revised versions they're putting out now) are cracking the stems of keycaps and artisans because the horizontal arms are too thickTFW u put box switches in your board that these caps are going to
Wait why is this a problem?
Hello, first time poster here. Did ye_cole test the stems and how they fit into box switches ? as this set is going to my white box keyboard, would be a shame if it wouldn't fit
Stretch marks on the stems indicate that the caps are plastically deforming. That means that even if they don’t actually crack, they will be loose on non-box switches. The damage has been done. I would advise not putting this set on a box switch if there is any possibility of the set being put on a non-box switch board in the future.
Post by: LevelSteam on Mon, 27 August 2018, 11:49:00
I'm still mourning the loss of my Laser sets, and will be putting these on Tealios myself.
Post by: jrfhoutx on Mon, 27 August 2018, 13:27:01
Box switches can jack up your keycaps due to the design oversight in their stem. It has nothing to do with the keycaps themselves, and if you put them on said switches you're rolling the dice on how bad that damage could be.
I'm still mourning the loss of my Laser sets, and will be putting these on Tealios myself.
It wasn't an oversight, it was intentional. before the enthusiast community started buying box switches a client requested the change to the stems, kailh obliged because that was the only client buying them at the time.
Post by: LevelSteam on Mon, 27 August 2018, 16:12:10
Box switches can jack up your keycaps due to the design oversight in their stem. It has nothing to do with the keycaps themselves, and if you put them on said switches you're rolling the dice on how bad that damage could be.
I'm still mourning the loss of my Laser sets, and will be putting these on Tealios myself.
It wasn't an oversight, it was intentional. before the enthusiast community started buying box switches a client requested the change to the stems, kailh obliged because that was the only client buying them at the time.
Im aware of that. The oversight was assuming that the new width was going to be fine for everyone else's keycaps and just distributing it as such.
Post by: ye_cole on Mon, 27 August 2018, 19:25:03
Quote
Hello, first time poster here. Did ye_cole test the stems and how they fit into box switches ? as this set is going to my white box keyboard, would be a shame if it wouldn't fit
they will, but don't expect them to go on another board well. They may also damage the caps themselves- i'd strongly advise against mounting these on box switches for now. Kalih is making a new batch with better tolerances, you may want to wait for that if you really want to use box switches.
Post by: neoCobweb on Mon, 27 August 2018, 20:11:03
Post by: KevlarBear on Tue, 28 August 2018, 19:15:21
(https://imgur.com/bKQIjqZ.jpg)
DZ60 with lubed Tealios
Post by: PurpleURP on Fri, 31 August 2018, 16:15:36
Post by: Vadurr on Fri, 31 August 2018, 18:52:42
Finally got around to take a picture of mine, loving it so far!Show Image(https://imgur.com/bKQIjqZ.jpg)
DZ60 with lubed Tealios
That cable really makes it all come together :thumb:
Post by: online on Mon, 03 September 2018, 19:25:44
Wish Candykey is more active on updating here.
Post by: omgthisnoise on Tue, 04 September 2018, 06:22:39
Post by: ye_cole on Wed, 05 September 2018, 19:44:06
Post by: JamesOFarrell on Thu, 06 September 2018, 22:36:19
Post by: Jubileus on Fri, 07 September 2018, 00:10:16
What happened with the SE aisa orders that were cancelled then re-ordered through NA? Did they ship out with the batch from Kono?
I had to pm ye_cole and email someone from kono about that and seems those are still not shipped.
Still waiting for updates from either sides. :(
Post by: ye_cole on Fri, 07 September 2018, 10:32:20
Quote
I had to pm ye_cole and email someone from kono about that and seems those are still not shipped.
Still waiting for updates from either sides. :(
Hey, sorry about this! Kono told me your order shipped, and I honestly don't check my PMs very often. I'll get to the bottom of this.
Quote
What happened with the SE aisa orders that were cancelled then re-ordered through NA? Did they ship out with the batch from Kono?
Yes, they should have.
Post by: omgthisnoise on Wed, 12 September 2018, 06:17:49
Post by: Jubileus on Wed, 12 September 2018, 07:04:22
Hey, sorry about this! Kono told me your order shipped, and I honestly don't check my PMs very often. I'll get to the bottom of this.
I still haven't received any confirmation :(
Post by: ye_cole on Wed, 12 September 2018, 10:10:24
Quote
I still haven't received any confirmation :(
Followed up with them, turns out they lost a unit. someone else also had their order returned to sender. They're going to re-ship that, and I'm going to ship you an unused set myself whenever it comes in, which should be in a couple days.
I apologize for all the delays you've been experiencing.
Post by: Francisco on Thu, 13 September 2018, 09:40:53
I received my Calm Depths and they're great. I'm very happy!
Good job! :thumb:
Post by: dc_in_sf on Thu, 13 September 2018, 14:28:20
no current ETA for shifts, but maxkey told me that they're going to make it when they finish making the mold. not 100% sure what that means, but i've requested an ETA.
I may be the only one who is keen for this, but definitely hope it comes through!
Post by: Vadurr on Thu, 13 September 2018, 14:45:56
Post by: pixelpusher on Thu, 13 September 2018, 15:10:06
[attachimg=1]
Post by: roguepotato_ on Fri, 14 September 2018, 12:39:14
Post by: ye_cole on Sat, 15 September 2018, 19:53:01
Quote
I may be the only one who is keen for this, but definitely hope it comes through!
Nope! Around 20 other people are right there with you.
Post by: Captainbuttmonkey on Wed, 19 September 2018, 14:41:08
Post by: q1w2e3r4t5z on Thu, 20 September 2018, 07:15:07
Hey all, I'm after a set. UK based, if anybody no longer wants theirs, give me a shout =]. I noticed a couple of people above have sets for sale but I thought I would see if anybody in the EU is getting rid of one before contacting them, cheers.German here, haven't received mine yet but I'm sure I won't keep it...
Post by: Francisco on Thu, 20 September 2018, 07:47:41
Hey all, I'm after a set. UK based, if anybody no longer wants theirs, give me a shout =]. I noticed a couple of people above have sets for sale but I thought I would see if anybody in the EU is getting rid of one before contacting them, cheers.
U Butt Monkey! Why U orda if u no wan? eh? :))
Post by: Captainbuttmonkey on Thu, 20 September 2018, 17:33:24
Hey all, I'm after a set. UK based, if anybody no longer wants theirs, give me a shout =]. I noticed a couple of people above have sets for sale but I thought I would see if anybody in the EU is getting rid of one before contacting them, cheers.German here, haven't received mine yet but I'm sure I won't keep it...
Fortunately I received an offer from a chap in the UK, but thanks anyway =]
Post by: Jubileus on Thu, 20 September 2018, 22:17:25
Quote
Pretty much done at this point
But I haven't received mine yet. :(
Post by: JamesOFarrell on Thu, 20 September 2018, 22:27:45
Post by: ye_cole on Fri, 21 September 2018, 08:32:10
Post by: q1w2e3r4t5z on Fri, 21 September 2018, 10:22:19
(https://i.imgur.com/k56FDDs.png)
Post by: Kawamashi on Sun, 23 September 2018, 02:57:27
Hey all, I'm after a set. UK based, if anybody no longer wants theirs, give me a shout =]. I noticed a couple of people above have sets for sale but I thought I would see if anybody in the EU is getting rid of one before contacting them, cheers.German here, haven't received mine yet but I'm sure I won't keep it...
I may be interested. Still available ?
Post by: q1w2e3r4t5z on Sun, 23 September 2018, 03:21:36
If it arrives, sure. See my post aboveHey all, I'm after a set. UK based, if anybody no longer wants theirs, give me a shout =]. I noticed a couple of people above have sets for sale but I thought I would see if anybody in the EU is getting rid of one before contacting them, cheers.German here, haven't received mine yet but I'm sure I won't keep it...
I may be interested. Still available ?
Post by: Kawamashi on Sun, 23 September 2018, 05:17:21
Post by: q1w2e3r4t5z on Sun, 23 September 2018, 11:38:37
Do you know if David has already shipped the set ? How much did you spend for it ?The set is clearly on the way to me as seen in the screenshot... I paid EUR 120 as everyone else who bought via CandyKeys
Post by: Jubileus on Mon, 24 September 2018, 00:12:27
Post by: JamesOFarrell on Mon, 24 September 2018, 01:05:40
I'm trying to work your situation out with kono but they haven't replied to my latest messages. I have one set with me and they have one set there because it was returned to sender. However, they still aren't working out who ships what where, which is a major inconvenience. I'm sorry you both don't have your sets yet- I'm trying to get them to you.
So they are working on it at the moment.
Post by: Starius on Tue, 25 September 2018, 19:14:10
Post by: dc_in_sf on Sun, 21 October 2018, 12:53:50
QuoteI may be the only one who is keen for this, but definitely hope it comes through!
Nope! Around 20 other people are right there with you.
Just checking in, any update on this?
Post by: ye_cole on Sun, 21 October 2018, 13:45:07
I'll update everyone when Maxkey follows up!
Post by: dc_in_sf on Sun, 21 October 2018, 18:34:23
Thanks for checking up- I followed up four days ago and he said "Now I am making the final adjustment of the mold. I will inform you when done."
I'll update everyone when Maxkey follows up!
Much obliged for the update!
Post by: LevelSteam on Wed, 24 October 2018, 22:05:57
Post by: ye_cole on Wed, 24 October 2018, 23:03:39
Finally got my Alt and the caps on there. Looking good, and thanks again for all the work that went into this. :thumb: (Attachment Link)
This looks great! :)
Post by: dc_in_sf on Mon, 12 November 2018, 12:43:33
Thanks for checking up- I followed up four days ago and he said "Now I am making the final adjustment of the mold. I will inform you when done."
I'll update everyone when Maxkey follows up!
Any further updates? Just checking in.
Post by: ye_cole on Mon, 12 November 2018, 14:17:03
Quote
Any further updates? Just checking in.
No, sorry. Thanks for checking up though!
Post by: punksinatra on Tue, 11 December 2018, 13:38:29
I am trying to acquire a set.. just want to know any ETA for the 2.25u shift keys?
Post by: ye_cole on Tue, 11 December 2018, 18:47:43
Quote
I am trying to acquire a set.. just want to know any ETA for the 2.25u shift keys?
Hey! I'm really sorry for the delay- they haven't gotten back to me yet but they said they'd email me when they're done. I'll check up again today.
Post by: ye_cole on Sun, 06 January 2019, 15:15:47
Hey guys!
Not sure what's taking them so long, but here's a screenshot of communication for you guys. I'm following up again, and I hope to have these to you as soon as they finish making them. :(
Post by: neoCobweb on Sun, 06 January 2019, 15:17:15
Post by: dc_in_sf on Fri, 11 January 2019, 16:17:43
https://imgur.com/a/7dZ6lCZ
Hey guys!
Not sure what's taking them so long, but here's a screenshot of communication for you guys. I'm following up again, and I hope to have these to you as soon as they finish making them. :(
Yep definitely thanks for keeping on this!
Post by: Audiobs on Mon, 14 January 2019, 12:29:39
QuoteI am trying to acquire a set.. just want to know any ETA for the 2.25u shift keys?
Hey! I'm really sorry for the delay- they haven't gotten back to me yet but they said they'd email me when they're done. I'll check up again today.
So the base kit is missing a 2.25u? It looks like there are 2x 2.25u in the original base render. Sorry I am too lazy to go through all the messages.
Post by: dc_in_sf on Mon, 14 January 2019, 16:13:18
QuoteI am trying to acquire a set.. just want to know any ETA for the 2.25u shift keys?
Hey! I'm really sorry for the delay- they haven't gotten back to me yet but they said they'd email me when they're done. I'll check up again today.
So the base kit is missing a 2.25u? It looks like there are 2x 2.25u in the original base render. Sorry I am too lazy to go through all the messages.
Correct, it shipped with a 2u shift that does not appear in the render rather than a second 2.25u shift.
Post by: ye_cole on Mon, 21 January 2019, 12:12:27
Post by: YiZZo on Mon, 21 January 2019, 12:18:06
Post by: ye_cole on Tue, 22 January 2019, 23:38:17
https://imgur.com/a/gu6422s
they made the shifts, but turns out they have a significant color difference from the calm depths shifts in terms of legend colors
i told them this wasn't acceptable
they said they would start redoing them after CNY
i'm sorry it's taking so long :(
Post by: Hokabuki on Wed, 23 January 2019, 00:33:24
hey guys- sorry to deliver more bad news.How does that even happen? Those aren’t even close. Thanks for continuing to follow up.
https://imgur.com/a/gu6422s
they made the shifts, but turns out they have a significant color difference from the calm depths shifts in terms of legend colors
i told them this wasn't acceptable
they said they would start redoing them after CNY
i'm sorry it's taking so long :(
Post by: dc_in_sf on Wed, 23 January 2019, 08:23:33
hey guys- sorry to deliver more bad news.
https://imgur.com/a/gu6422s
they made the shifts, but turns out they have a significant color difference from the calm depths shifts in terms of legend colors
i told them this wasn't acceptable
they said they would start redoing them after CNY
i'm sorry it's taking so long :(
Another thanks for continuing to keep this alive. I live in hope :-)
Post by: KevlarBear on Tue, 29 January 2019, 18:49:35
Post by: neoCobweb on Wed, 27 February 2019, 14:05:15
Post by: dc_in_sf on Tue, 02 April 2019, 13:44:45
hey guys- sorry to deliver more bad news.
https://imgur.com/a/gu6422s
they made the shifts, but turns out they have a significant color difference from the calm depths shifts in terms of legend colors
i told them this wasn't acceptable
they said they would start redoing them after CNY
i'm sorry it's taking so long :(
Just checking back in... Any news?
Post by: ye_cole on Wed, 03 April 2019, 08:53:59
https://imgur.com/a/47ylYED
they finished today
Post by: dc_in_sf on Mon, 08 April 2019, 08:53:58
yessir!
https://imgur.com/a/47ylYED
they finished today
Awesome! I'm looking forward to removing that annoying gap on my right shift on my Clueboard when these finally ship!
Post by: KevlarBear on Thu, 18 April 2019, 13:24:18
yessir!Awesome, when do you think you'll receive them to ship out?
https://imgur.com/a/47ylYED
they finished today
Post by: ye_cole on Thu, 18 April 2019, 16:24:11
Post by: dc_in_sf on Thu, 18 April 2019, 18:36:15
my bad, they're at my house right now. they came two days ago. i haven't gotten to getting ready to ship it yet, however.
It's been a while, I seem to remember there was a shipping cost that needed to be met, will you be sending invoices? do we need to sign up somewhere?
Post by: zabuza1997 on Sat, 27 April 2019, 09:39:11
Sent from my Redmi Note 5 using Tapatalk
Post by: ye_cole on Sat, 27 April 2019, 10:46:15
With that being said, here's the google form that I put up a while back.
https://forms.gle/nQzhiwxtMa5p45Zj8
Post by: KevlarBear on Sat, 01 June 2019, 22:25:02
Post by: ye_cole on Fri, 14 June 2019, 23:28:48
Post by: euphxenos on Sat, 15 June 2019, 01:48:57
Post by: Cods on Sat, 15 June 2019, 20:36:57
I have a Signature Plastics SA Calm Depths set and would be really interested in an extra 2.25U SHIFT, but maybe I’m waaay late to this party...
Post by: dc_in_sf on Mon, 08 July 2019, 22:09:39
My bad- should have replied earlier. I'll start sending them out this week. It should probably be around 3-4 dollars/ shift to pay for shipping. I'll most likely ship before invoicing.
Hey ye_cole, just checking in on this. I know it is probably pretty low priority :-)
Post by: ye_cole on Thu, 11 July 2019, 16:37:42
update: going to wait for 48 hours from now to make sure everyone who would like to get one can get one / has paid / has contacted me, and then I'll start shipping them. Again, my apologies that this took FOREVER.
Post by: euphxenos on Mon, 15 July 2019, 22:40:35
Post by: KevlarBear on Mon, 15 July 2019, 22:42:09
Post by: Hokabuki on Fri, 19 July 2019, 10:20:45
Post by: euphxenos on Fri, 26 July 2019, 18:15:14
Post by: jrfhoutx on Sat, 27 July 2019, 21:44:00
When should we expect the additional shifts to ship?
At the rate this whole thing has been going, expect them sometime next year...
Post by: ye_cole on Tue, 30 July 2019, 16:10:07
I have two shifts addressed to people who live in TN and VA that have not been shipped yet. Those will be shipped out today.
If you live in Canada, the customs form will be completed and your shift will be shipped out today too.
I apologize for the delays and for how slowly I've gotten these out.
Post by: Hokabuki on Fri, 02 August 2019, 00:00:46
Post by: KevlarBear on Fri, 02 August 2019, 00:01:48
Post by: itsLok on Sat, 17 August 2019, 11:51:09
holy i'm so sorry i keep not getting to this. they're just sitting with me at the moment, and I'll get the invoices out by tomorrow night.
update: going to wait for 48 hours from now to make sure everyone who would like to get one can get one / has paid / has contacted me, and then I'll start shipping them. Again, my apologies that this took FOREVER.
Hey ye_cole,
Keeb newbie here. Just completed my first build, a Clueboard 66%. I was NOT in the original group buy for CD, but Kono Store is still selling a CD set and I'm absolutely in love :D is there any chance you still have an extra 2.25u shift laying around for this CD set? I filled out your google form that is still up. Willing to pay whatever it takes! Located in AL. Thanks for all your hard work!
Post by: dc_in_sf on Sun, 18 August 2019, 11:22:36
(https://i.imgur.com/dcsojbq.jpg)
Galactic Blue Norbaforce - really hard to get a decent photo of the finish on this case, but it goes really well with the blue of Calm Depths.