[SPRiT] R1 R2 (Shipping 92% Completed)

[SpAmRaY]

I guess I need to order something

[sprit]

Orange,  Lime Green        >>  http://www1.kbdmania.net/xe/photo/7677397
 

[cruk]

This is so confusing, there are too many choices, put indecisive people like me in a difficult position.

If im ordering 1x60, 1x75, i believe i need to specify which plates for which?

If SW Spring is Under 65g,  I Recommend Acryl 5mm Plate,
If You enjoy the Power-Typing,  I 'd Recommend  Dura-Alu 4mm Plate !!

I meant to say that if i have two different size boards, i need two different size plates and have to specify those on the form right? Thanks

[sprit]

You can Change, or Resend  Your Order Form at Anytime Before the Payment. !!          No Trouble For me at all !

[ithinkimkorean]

You can Change, or Resend  Your Order Form at Anytime Before the Payment. !!          No Trouble For me at all !

Can you make sure I picked clear switches and not reds? I was deciding between the two and forgot what I picked.

+ 55g springs

[sprit]

Can you make sure I picked clear switches and not reds? I was deciding between the two and forgot what I picked.
+ 55g springs

Hello!   IthinkimKorean !    Would You Plz, Send me a New Order Form ?    Previous Order seems a little bit Not clear.    Thx   

[JPG]

Hey are the custom springs gold?

[bladegesnow]

A new order form sent XD

[sprit]

Hey are the custom springs gold?

The Custom Springs are Very Cherry Original Like,  Not a Pointless Korean gold!

[ithinkimkorean]

Can you make sure I picked clear switches and not reds? I was deciding between the two and forgot what I picked.
+ 55g springs

Hello!   IthinkimKorean !    Would You Plz, Send me a New Order Form ?    Previous Order seems a little bit Not clear.    Thx   

Ok finished new form 

[sprit]

Can you make sure I picked clear switches and not reds? I was deciding between the two and forgot what I picked.
+ 55g springs

Hello!   IthinkimKorean !    Would You Plz, Send me a New Order Form ?    Previous Order seems a little bit Not clear.    Thx   

Ok finished new form 

Your Order Well  Transmitted !!  Bon Voyage !   Captain 116 !

[alixinhzai]

ordered thx u

[sprit]

 Kaffe  Break
   
     

[nuclearsandwich]

Do any of the PCB options support the two columns of function keys on the left?

[sprit]

Do any of the PCB options support the two columns of function keys on the left?

SPRIT  Model 2 will show the End Of December,  They have PCBs Like That.  Sir! 

http://www1.kbdmania.net/xe/photo/7652156

[Permeability]

Hi sprit, is the multicolor LED an LED that can change colors? Or a mix of different LEDs that have only 1 color?

[nuclearsandwich]

Do any of the PCB options support the two columns of function keys on the left?

SPRIT  Model 2 will show the End Of December,  They have PCBs Like That.  Sir! 

http://www1.kbdmania.net/xe/photo/7652156


(Attachment Link)

Awesome. That thing is so long you could surf on it.

[Loligagger]

Would it be possible to order 70g springs alone?

[sprit]

Would it be possible to order 70g springs alone?

Sure !!  Loligagger !

[Melanic]

Hello, just a few questions.

Do the PCBs have LEDs on them as default, or will I need to get some High Brights/MultiColors? Do they come with resistors?
Will you have pictures of the metal cases before the order deadline for the PCBs?
Would it be alright to mix and match switches for the 90/110 pieces? eg: 20 black + 70 red

Thanks.
     

[sprit]

Hello, just a few questions.

Do the PCBs have LEDs on them as default, or will I need to get some High Brights/MultiColors? Do they come with resistors?
Will you have pictures of the metal cases before the order deadline for the PCBs?
Would it be alright to mix and match switches for the 90/110 pieces? eg: 20 black + 70 red

Thanks.
     

THX      

[mashby]

Filled out the order form for 1 white PCB with clear acrylic plate.

[sprit]

Filled out the order form for 1 white PCB with clear acrylic plate.

Your Order Transmission Completed.  No Data deletion Detected.  Sir!

[Melanic]

Hello, just a few questions.

Do the PCBs have LEDs on them as default, or will I need to get some High Brights/MultiColors? Do they come with resistors?
Will you have pictures of the metal cases before the order deadline for the PCBs?
Would it be alright to mix and match switches for the 90/110 pieces? eg: 20 black + 70 red

Thanks.
     

THX   

Sorry? I don't think you answered any of the questions.

 Kaffe  Break
   
(Attachment Link)     (Attachment Link)

But, I did notice one of your latest pictures. Are those the aluminum cases?

[sprit]

But, I did notice one of your latest pictures. Are those the aluminum cases?

Sorry for Quick answer, I had to talk with my Family.

LED : You need to solder to your taste
Alu case :  will show soon in a week
When You read the first page of this Topic,  I hope You will get the answers!

[keymaster]

Is it possible to purchase just a few LEDs of various colors? I don't need a mix of 20 pieces. I would just like to get like 2 piece orange/amber LEDs in addition to my 110 White LEDs.

[sprit]

Is it possible to purchase just a few LEDs of various colors? I don't need a mix of 20 pieces. I would just like to get like 2 piece orange/amber LEDs in addition to my 110 White LEDs.

I will Send 2 piece orange/amber LEDs into Your 110 pcs White LED's .  I will make a comment on your Orders!  My Friend!

[keymaster]

Is it possible to purchase just a few LEDs of various colors? I don't need a mix of 20 pieces. I would just like to get like 2 piece orange/amber LEDs in addition to my 110 White LEDs.

I will Send 2 piece orange/amber LEDs into Your 110 pcs White LED's .  I will make a comment on your Orders!  My Friend!

Thank you so much! I'm very excited to build this keyboard and I'm sure our Korean overlords will not disappoint. 

[pasph]

Orders will close on Nov.23?

[sprit]

Orders will close on Nov.23?

Yes!  Pasph !        The 1st Wave of Order is near MOQ  and needs go to into Production in the Factories. 

The 2nd Wave of Order Will open on 25th. 

[hermith]

I have a couple of things I was a bit curious about if you don't mind answering Sprit (or anyone else for that matter!).

1. How important is it to have a plate? So far I haven't ordered any plate to save money - but reading this thread makes me uncertain.

2. Is it possible to change the key bindings by flashing the controller directly?

Thanks!

[ninjadoc]

2. PolyCarbon : 1.6mm thick :  In My Opinion : quite Strong and flexible,

What happened to this plate?
It cannot be ordered.

[yicaoyimu]

After reading the first 9 pages of this thread, I realised that the plate is not for 60% PCB 

Guess I will have to find a plate somewhere else then...

Sprit, could you help me change my order to PCB only? Or I can put in another order, whichever works best for you.

[SpAmRaY]

After reading the first 9 pages of this thread, I realised that the plate is not for 60% PCB 

Guess I will have to find a plate somewhere else then...

Sprit, could you help me change my order to PCB only? Or I can put in another order, whichever works best for you.

Why do you say that the plate is not for 60%? As far as I can tell there is corresponding plate and case for every PCB offered.

[Elias Camber]

alright... hmm... alright, damn it... you got me.
It's too good to be missed,
ordered.

Would it be right to say that the custom springs 65g are about halfway in between reds and blacks?

[yicaoyimu]

After reading the first 9 pages of this thread, I realised that the plate is not for 60% PCB 

Guess I will have to find a plate somewhere else then...

Sprit, could you help me change my order to PCB only? Or I can put in another order, whichever works best for you.

Why do you say that the plate is not for 60%? As far as I can tell there is corresponding plate and case for every PCB offered.

OP says "Phantom Style Plates" and the pictures of PCB are 110% and 87%. And there was another form nuclearsandwich created on page 9, trying to make the order form more clear, which does not have an option for 60% plate. Plus, the order form in OP only says plate but no option for plate size. I could be totally wrong. I am so confused.

[SpAmRaY]

After reading the first 9 pages of this thread, I realised that the plate is not for 60% PCB 

Guess I will have to find a plate somewhere else then...

Sprit, could you help me change my order to PCB only? Or I can put in another order, whichever works best for you.

Why do you say that the plate is not for 60%? As far as I can tell there is corresponding plate and case for every PCB offered.

OP says "Phantom Style Plates" and the pictures of PCB are 110% and 87%. And there was another form nuclearsandwich created on page 9, trying to make the order form more clear, which does not have an option for 60% plate. Plus, the order form in OP only says plate but no option for plate size. I could be totally wrong. I am so confused.

I would disregard any forms made by anyone other than the OP.

Also if you order a 60% PCB and a plate then you will get a 60% plate, or so I would assume.

[nuclearsandwich]

Didn't realize I let the suggested form be open for responses. It was just meant to be a suggestion for Sprit on how to clean up the original form and the current one does incorporate my suggestions.

I'm PMing the individuals who put themselves on my form and I've (theoretically) closed it for responses. Apologies for generating confusion in the pursuit of simplicity.

[elllit]

Updated my order... change my name! No, just kidding!

But I changed a thing or two.

[sprit]

I have a couple of things I was a bit curious about if you don't mind answering Sprit (or anyone else for that matter!).

1. How important is it to have a plate? So far I haven't ordered any plate to save money - but reading this thread makes me uncertain.

2. Is it possible to change the key bindings by flashing the controller directly?

Thanks!

1. Plates are Good For Stability, if it is  too hard, bad for Your Fingers especially When You Prefer under 70g springs, IMO.

2. That's 100% Right !  Hermith !   

[sprit]

2. PolyCarbon : 1.6mm thick :  In My Opinion : quite Strong and flexible,

What happened to this plate?
It cannot be ordered.

Nice  catch!  Mr. ninjadoc!!        Just For the MOQ.  But What the hell,   I updated for 1.6mm PC PolyCarbon Option! 

[sprit]

alright... hmm... alright, damn it... you got me.
It's too good to be missed,
ordered.

Would it be right to say that the custom springs 65g are about halfway in between reds and blacks?

In my Opinion,  the Cherry MX Springs are Roughly,   MX Red < Brown < Blue < Black < Clear  etc..     I love 65g  too.

[sprit]

Didn't realize I let the suggested form be open for responses. It was just meant to be a suggestion for Sprit on how to clean up the original form and the current one does incorporate my suggestions.

I'm PMing the individuals who put themselves on my form and I've (theoretically) closed it for responses. Apologies for generating confusion in the pursuit of simplicity.

I really love Your Suggestion Mr.!       You helped Me a LOT !!

[sprit]

Updated my order... change my name! No, just kidding!

But I changed a thing or two.

Guten Morgen ! Mein Freund  elllit!   Danke Schoen !!   Ich habe Deine Order Forma in meine Hand !

Wie Geht es?  Wo wohnst du?

[sprit]

After reading the first 9 pages of this thread, I realised that the plate is not for 60% PCB 

Guess I will have to find a plate somewhere else then...

Sprit, could you help me change my order to PCB only? Or I can put in another order, whichever works best for you.

OK!  yicaoyimu!  The Plates are abundant everywhere, I love GH Phantom Plates.  60% 75%  87%  110% Plates are inclued in This GB.

[pichu23]

dude, ugpm. o_o

[sprit]

OP says "Phantom Style Plates" and the pictures of PCB are 110% and 87%. And there was another form nuclearsandwich created on page 9, trying to make the order form more clear, which does not have an option for 60% plate. Plus, the order form in OP only says plate but no option for plate size. I could be totally wrong. I am so confused.

A Form can not include Every contents clearly,   So Here is  a  SPRIT-BOT  for You !

I will check Every Order, and I will Send You  'THE Order Confirmation Email '   

If you want  60% PCB and 75% PCBs,  and when you write 1 Red Acryl Plate,  1 White Alu Plate,  =  I will ask Which plate is for Which PCB. 

[kektr0city]

Sprit, can I add 55g springs, 90pcs to my order please?

[sprit]

Sprit, can I add 55g springs, 90pcs to my order please?

OK!  thx.  You can Send a 2nd Order form, this is easier!!      

[Biased opinion]

filled in the form and for a 60% with blue, hopefully the shipping to Aus does not kill me

Hi Mate?   Wher' About Aus?   

im in Brisbane QLD

also do i just resubmit the from to change the order, i want to change the colors of the case plates.