Author Topic: [SPRiT] R1 R2 (Shipping 92% Completed) (Read 1783975 times)

keymaster · « **Reply #600 on:** Tue, 26 November 2013, 16:42:06 »

Sprit,

I have a question regarding your springs. How much difference is there between your 55g springs and the stock MX Brown springs? Do the 55g springs weigh just a little bit more?

ithinkimkorean · « **Reply #601 on:** Tue, 26 November 2013, 16:47:57 »

So excited. Now i have to buy soldering iron and stuff. T.T hope i can buy books next semester.

fatchoi · « **Reply #602 on:** Tue, 26 November 2013, 18:13:15 »

Thank you. Received the emails. Will pay tonight after work.

nubbinator · « **Reply #603 on:** Tue, 26 November 2013, 18:21:17 »

People are getting invoiced already? I never got mine for the PCB order I put in.

tjweir · « **Reply #604 on:** Tue, 26 November 2013, 18:22:10 »

Quote from: nubbinator on Tue, 26 November 2013, 18:21:17

People are getting invoiced already? I never got mine for the PCB order I put in.

+1

justnits · « **Reply #605 on:** Tue, 26 November 2013, 18:37:52 »

i think if you did placed your order before the 25th, he'll get to it. don't forget that he got his korean friends ordering from him as well! and besides that, having to check on the details over to make sure it's correct, replying PMs and being a father

sprit · « **Reply #606 on:** Tue, 26 November 2013, 18:55:04 »

Quote from: justnits on Tue, 26 November 2013, 18:37:52

i think if you did placed your order before the 25th, he'll get to it. don't forget that he got his korean friends ordering from him as well! and besides that, having to check on the details over to make sure it's correct, replying PMs and being a father

Good Morning!! justnits!

Who is he, He is Who? Who Puts the Deadlines on My Alu Models?

justnits · « **Reply #607 on:** Tue, 26 November 2013, 19:10:13 »

was referring to nubbinator's post
"People are getting invoiced already? I never got mine for the PCB order I put in."

there's a deadline on alu case?

Quote from: sprit on Tue, 26 November 2013, 18:55:04

Quote from: justnits on Tue, 26 November 2013, 18:37:52
i think if you did placed your order before the 25th, he'll get to it. don't forget that he got his korean friends ordering from him as well! and besides that, having to check on the details over to make sure it's correct, replying PMs and being a father
Good Morning!! justnits!

Who is he, He is Who? Who Puts the Deadlines on My Alu Models?

sprit · « **Reply #608 on:** Tue, 26 November 2013, 19:20:09 »

Quote from: keymaster on Tue, 26 November 2013, 16:42:06

Sprit,

I have a question regarding your springs. How much difference is there between your 55g springs and the stock MX Brown springs? Do the 55g springs weigh just a little bit more?

To The Cherry Standard, I call MX Brown as 55g, Blue 60g, Black 65~75g, Clear 70~90g ?. 100g is heavier than MX Clear.

AS All the Instruments and facilities are different, I amt Trying to get the Quality as the Cherry Original, and a little bit Beyoned.

sprit · « **Reply #609 on:** Tue, 26 November 2013, 21:36:21 »

I need a Better Setup for my Paypal Account with My Bank, So Please wait Your Payment untill Tomorrow.

I will tell you when It is Ready !

fatchoi · « **Reply #610 on:** Wed, 27 November 2013, 07:26:48 »

Quote from: sprit on Tue, 26 November 2013, 21:36:21

I need a Better Setup for my Paypal Account with My Bank, So Please wait Your Payment untill Tomorrow.

I will tell you when It is Ready !

Sure thing. Will hold until you are ready.

sprit · « **Reply #611 on:** Wed, 27 November 2013, 10:10:47 »

Thx guys!

MrChunky · « **Reply #612 on:** Wed, 27 November 2013, 12:53:40 »

Still haven't got my order confirmation. Waiting patiently...

AnalogBlu · « **Reply #613 on:** Wed, 27 November 2013, 19:20:28 »

Hey Sprit I got my invoice (1144) but some of the details are incorrect. Did you get my corrections?

debt4lyfe · « **Reply #614 on:** Wed, 27 November 2013, 19:40:32 »

i apologize for being pushy. i'm just very excited for this order

IMHB · « **Reply #615 on:** Wed, 27 November 2013, 21:21:57 »

hey sprit! I received your invoice, but when I'm trying to pay it says "This recipient is currently unable to receive money."

should I be concerned....? what's going on?

SpAmRaY · « **Reply #616 on:** Wed, 27 November 2013, 21:23:50 »

Quote from: IMHB on Wed, 27 November 2013, 21:21:57

hey sprit! I received your invoice, but when I'm trying to pay it says "This recipient is currently unable to receive money."

should I be concerned....? what's going on?

It's common for group buy organizers PayPal to get locked.

I'm sure sprit will get it sorted out.

sprit · « **Reply #617 on:** Wed, 27 November 2013, 21:46:58 »

I am Finalizing This ....

SPRIT Model 1 MeTaL

http://www.youtube.com/watch?v=Y1IZdqjyCOM
Design and patents protected. all rights reserved.

Permeability · « **Reply #618 on:** Wed, 27 November 2013, 21:58:30 »

Hi sprit, will you ever sell stabilizers to go with the PCB?

HPE1000 · « **Reply #619 on:** Wed, 27 November 2013, 22:13:22 »

Swarovski?

numiru · « **Reply #620 on:** Wed, 27 November 2013, 22:48:14 »

Still haven't gotten an order confirmation, did my order get through, Sprit?

akikun · « **Reply #621 on:** Thu, 28 November 2013, 00:15:05 »

So... I'm trying to pay in PayPal (invoice 1033), but when I click "Pay Invoice," I get an error saying "This recipient is currently unable to receive money." Anyone else having this problem?

keymaster · « **Reply #622 on:** Thu, 28 November 2013, 00:16:11 »

Quote from: akikun on Thu, 28 November 2013, 00:15:05

So... I'm trying to pay in PayPal (invoice 1033), but when I click "Pay Invoice," I get an error saying "This recipient is currently unable to receive money." Anyone else having this problem?

Quote from: sprit on Tue, 26 November 2013, 21:36:21

I need a Better Setup for my Paypal Account with My Bank, So Please wait Your Payment untill Tomorrow.

I will tell you when It is Ready !

stoic-lemon · « **Reply #623 on:** Thu, 28 November 2013, 00:25:21 »

ITT People who don't read the thread. Although in their defence, this is the most baffling GB ever.

akikun · « **Reply #624 on:** Thu, 28 November 2013, 00:30:06 »

Oh crap, sorry! How did I miss that?

...I'm going to say that I was distracted by that beautiful close-up of the case, lol.

sprit · « **Reply #625 on:** Thu, 28 November 2013, 01:38:21 »

Quote from: stoic-lemon on Thu, 28 November 2013, 00:25:21

ITT People who don't read the thread. Although in their defence, this is the most baffling GB ever.

On what Ground, Whatsoever? Mr. ?

HPE1000 · « **Reply #626 on:** Thu, 28 November 2013, 01:43:17 »

Yeah I was wondering the same

sprit · « **Reply #627 on:** Thu, 28 November 2013, 01:46:44 »

Quote from: SpAmRaY on Wed, 27 November 2013, 21:23:50

Quote from: IMHB on Wed, 27 November 2013, 21:21:57
hey sprit! I received your invoice, but when I'm trying to pay it says "This recipient is currently unable to receive money."

should I be concerned....? what's going on?

It's common for group buy organizers PayPal to get locked.

I'm sure sprit will get it sorted out.

Hello! Guys! You 'd better Reserve Your Order, if You are doubt on this GB, If i am in Your position, I'd do that .

stoic-lemon · « **Reply #628 on:** Thu, 28 November 2013, 02:56:45 »

I have no doubts the end product will be amazing and well worth it. It's just been a little confusing with multiple order forms and teaser shots and music videos. All good fun though.

sprit · « **Reply #629 on:** Thu, 28 November 2013, 03:01:36 »

I'd like to say, I fall in Love with GH, as You Guys!

I Wish All the Best Things in my Works !

Really Sorry from my Heart, for the Delay or Confusions!!

nuclearsandwich · « **Reply #630 on:** Thu, 28 November 2013, 03:03:38 »

Quote from: sprit on Thu, 28 November 2013, 03:01:36

I'd like to say, I fall in Love in GH as You Guys!

I Wish All the Best Things in my Works !

Really Sorry from my Heart, for the Delay or Confusions!!

No sweat. The delay is actually perfect for those who get paid at the end of the month.

sprit · « **Reply #631 on:** Thu, 28 November 2013, 04:27:51 »

Quote from: nuclearsandwich on Thu, 28 November 2013, 03:03:38

No sweat. The delay is actually perfect for those who get paid at the end of the month.

Danke Schoen!! Mr. NuKSandwich

Vintage · « **Reply #632 on:** Thu, 28 November 2013, 09:48:52 »

Are those new pics in the OP of the metal case or is that still the acrylics ones?

sprit · « **Reply #633 on:** Thu, 28 November 2013, 10:41:12 »

Quote from: Vintage on Thu, 28 November 2013, 09:48:52

Are those new pics in the OP of the metal case or is that still the acrylics ones?

New Pics are Metals !

justnits · « **Reply #634 on:** Thu, 28 November 2013, 10:48:34 »

still teasing us...or at least me

sprit · « **Reply #635 on:** Thu, 28 November 2013, 10:51:06 »

Quote from: justnits on Thu, 28 November 2013, 10:48:34

still teasing us...or at least me

I am teasing who are Full ready to copy my design! Not the people in this GB.

Teasing can be an Attraction?

justnits · « **Reply #636 on:** Thu, 28 November 2013, 10:57:18 »

ahhh! now i get it why you do this....

understood the "teasing" and the delay now

Quote from: sprit on Thu, 28 November 2013, 10:51:06

Quote from: justnits on Thu, 28 November 2013, 10:48:34
still teasing us...or at least me

I am teasing who are Full ready to copy my design! Not the people in this GB.

Teasing can be an Attraction?

Vintage · « **Reply #637 on:** Thu, 28 November 2013, 10:59:17 »

So i get the impression that this is a hybrid case (acrlic/metal)? Is the body part acrylic too or just the inside?

botay46 · « **Reply #638 on:** Thu, 28 November 2013, 11:14:16 »

plz send invoice to me

sprit · « **Reply #639 on:** Thu, 28 November 2013, 11:24:25 »

Quote from: Vintage on Thu, 28 November 2013, 10:59:17

So i get the impression that this is a hybrid case (acrlic/metal)? Is the body part acrylic too or just the inside?

Yes ! right ! You got Me

1. Traditional Alu Metal Box 2. Alu / Polymer Hybrid For the LED Effect!

Vintage · « **Reply #640 on:** Thu, 28 November 2013, 11:25:49 »

So one model is all alu and the other is hybrid?

sprit · « **Reply #641 on:** Thu, 28 November 2013, 11:25:59 »

> Pre-Order Check For MOQ : Metal OPEN !!

https://docs.google.com/forms/d/1aMk5aG9l8dlwLBTAS9D-VMRm-xWmi69cpkRDgy_k1lI/viewform

sprit · « **Reply #642 on:** Thu, 28 November 2013, 11:27:44 »

Quote from: Vintage on Thu, 28 November 2013, 11:25:49

So one model is all alu and the other is hybrid?

Yes right Sir !

keymaster · « **Reply #643 on:** Thu, 28 November 2013, 11:31:07 »

What is cost of aluminum/polymer 87% case?

Vintage · « **Reply #644 on:** Thu, 28 November 2013, 11:31:45 »

Sounds good. When are the all alu pics coming?

And the hybrid is the same price as all alu or?

Signature · « **Reply #645 on:** Thu, 28 November 2013, 11:32:44 »

Quote from: Vintage on Thu, 28 November 2013, 11:31:45

Sounds good. When are the all alu pics coming? And the hybrid is the same price as all alu or?

I guess when the order form is up!
That would be 30th of november!

sprit · « **Reply #646 on:** Thu, 28 November 2013, 11:38:35 »

Quote from: keymaster on Thu, 28 November 2013, 11:31:07

What is cost of aluminum/polymer 87% case?

Alu / Polymer Hybrid is slightly higher (around + 50 USD) for Extra CNC Machining... I am trying to cut it down !

Vintage · « **Reply #647 on:** Thu, 28 November 2013, 11:41:44 »

kk thx. Can't wait to see more pics

And the form wants you to fill out the "thank you" field btw xD

sprit · « **Reply #648 on:** Thu, 28 November 2013, 11:43:07 »

Quote from: Vintage on Thu, 28 November 2013, 11:41:44

kk thx. Can't wait to see more pics

And the form wants you to fill out the "thank you" field btw xD

sorry ! ha! Pics Updated

dorkvader · « **Reply #649 on:** Thu, 28 November 2013, 11:56:26 »

I see there are three holes in the back of the case. One is for the cable (I would imagine). What are the other two for?

News:

Author Topic: [SPRiT] R1 R2 (Shipping 92% Completed) (Read 1783975 times)