[SPRiT] R1 R2 (Shipping 92% Completed)

[sprit]

I see there are three holes in the back of the case. One is for the cable (I would imagine). What are the other two for?

Hello!  Mr. Dorkvader!   It's for the Future Compatibility.

[Signature]

Can we get a pick of the pure alu case too?

[Vintage]

Yeah, I'd love to see the pure alu version as well.

[sprit]

Yeah, I'd love to see the pure alu version as well.

One single Piece Top-Grade  Alu Metal  :  150  180   250   300 USD   as I mentioned !

[Signature]

Yeah, I'd love to see the pure alu version as well.

One single Piece Top-Grade  Alu Metal  :  150  180   250   300 USD   as I mentioned !

Yeah but the Pictures!

[sprit]

Yeah, I'd love to see the pure alu version as well.

One single Piece Top-Grade  Alu Metal  :  150  180   250   300 USD  as I mentioned !

Yeah but the Pictures!

As You see on the 1st page of This GB!   I am out of design ideas !  haha !!             

Anyway I will not collect any money before the Pre-Check for the MOQ is OK.     

[Signature]

Yeah, I'd love to see the pure alu version as well.

One single Piece Top-Grade  Alu Metal  :  150  180   250   300 USD  as I mentioned !

Yeah but the Pictures!

As You see on the 1st page of This GB!   I am out of design ideas !  haha !!             

Anyway I will not collect any money before the Pre-Check for the MOQ is OK.     

You could maybe take the design from the Cope Break? I´m sorry but I fell in love with that design! 

[Vintage]

lol I agree. That was a very sexy case.

[AlexJP]

Hey Sprit, did you get my PM?
 I had to cancel all invoices, problem with my paypal/bank security was over the limit for international buys
I made a new order and just for the 60% keyboard (complete with everything).

Sorry for the trouble 

[durandalx]

Sprit,

I got my invoice for my 2 cases but when I went to pay my invoice and paypal had this warning on top of the payment page: "This recipient is currently unable to receive money." -- so I guess I'm waiting til that gets fixed.

[Signature]

Sprit,

I got my invoice for my 2 cases but when I went to pay my invoice and paypal had this warning on top of the payment page: "This recipient is currently unable to receive money." -- so I guess I'm waiting til that gets fixed.

He is currently updating his paypal so he will tell when you can pay him again!

[bubchi89]

I just found out that we are suppose to specify case finishes, so I edited my existing form to specify a "matte" finish. Let me know if it'd be easier for you if I instead submitted a new form.

Also, waiting for your paypal account to clear up so I can pay

[Latin00032]

So i get the impression that this is a hybrid case (acrlic/metal)? Is the body part acrylic too or just the inside?

Does the cases in the picture have the top layer as metal and a bottom layer as acrylic?

[sprit]

 
Does the cases in the picture have the top layer as metal and a bottom layer as acrylic?

Yes! You are Right!      
Model 1 M  - No.01      :   All Metal   
Model 1 M  - No.02    :   Metal / Polymer / Metal      
   

[Vintage]

So there's no design at the moment for the pure aluminium case?

Thought it was supposed to be inspired by those car pics 

[sprit]

So there's no design at the moment for the pure aluminium case?

Thought it was supposed to be inspired by those car pics 

Put a Comment What You want on Your Pre-Check for MOQ Form, Plz.    Don't leave it Blank, My Friend!
     

[naokira]

you said the PCBs are already producing, does that mean you shouldered the initial cost?

[durandalx]

Sprit,

I got my invoice for my 2 cases but when I went to pay my invoice and paypal had this warning on top of the payment page: "This recipient is currently unable to receive money." -- so I guess I'm waiting til that gets fixed.

He is currently updating his paypal so he will tell when you can pay him again!

Thanks for the update!

[bazh]

sprit, I need you to check if I'm already in the order list, I worried about it

[sprit]

you said the PCBs are already producing, does that mean you shouldered the initial cost?

hello!  So What is your point?   

[sprit]

sprit, I need you to check if I'm already in the order list, I worried about it

You will get PCBs Anyway!  Do You need it Quick? 

[sprit]

So there's no design at the moment for the pure aluminium case?

Thought it was supposed to be inspired by those car pics 

Do You Read my Replies and Posts in English?   

[naokira]

you said the PCBs are already producing, does that mean you shouldered the initial cost?

hello!  So What is your point?   

Nothing, I'm just asking weather you shouldered the initial cost of the production of the PCBs because you didn't get to have all of the payments yet (for example mine).

Or I'm just wrong and it's still not in production?

[sprit]

I am Not Available This Weekend!   Family Trip to an Island.

Have a Good Weekend, Guys !!

[justnits]

aww...so no pure alu case pic till at least monday 

I am Not Available This Weekend!   Family Trip to an Island.

Have a Good Weekend, Guys !!

[AlexJP]

You too Sprit. 

[meiosis]

I am Not Available This Weekend!   Family Trip to an Island.

Have a Good Weekend, Guys !!

I knew it sprit owns his own private island

[HPE1000]

Have fun sprit! 

[ithinkimkorean]

I am Not Available This Weekend!   Family Trip to an Island.

Have a Good Weekend, Guys !!

jejudo?

[sprit]

jejudo?

yes! Right!  Warmer Jeju Island  similar weather as Tokyo and  Osaka.      

[sprit]

Have fun sprit! 

Have a wonderful Weekend!  HPE1000 !!

[archer]

From the old, closed thread.. still waiting for your reply:

I took another look at the 3 invoices:

#1231 - 87% Acryl case
#1232 - 87% Acryl case: Clear/Frosty/Clear
#1247 - 75% Acryl case

So it looks like #1232 & #1247 are the correct invoices.

Please verify the following, and I will pay the invoices:

#1232 - 87% Acryl case: Clear/Frosty/Clear --- Please Verify that this is for a Filco compatible case. The colors are correct.
#1247 - 75% Acryl case --- Please verify that the colors for this case are Frosty/Clear/Frosty

Let me know when you've looked into these 2 invoices. If everything looks good, I'll pay you immediately. Thanks!

[sprit]

Let me know when you've looked into these 2 invoices. If everything looks good, I'll pay you immediately. Thanks!

OK !  Thanks,  You have it sorted out what you want!
I will look into it again,  And We talk on Email ok?       

[Signature]

Let me know when you've looked into these 2 invoices. If everything looks good, I'll pay you immediately. Thanks!

OK !  Thanks,  You have it sorted out what you want!
I will look into it again,  And We talk on Email ok?   

Lol arent you on your family trip?

[elllit]

Let me know when you've looked into these 2 invoices. If everything looks good, I'll pay you immediately. Thanks!

OK !  Thanks,  You have it sorted out what you want!
I will look into it again,  And We talk on Email ok?   

Lol arent you on your family trip?

see how dedicated he is?

[Narandelar]

Im not sure if this is the right place to ask so Im sorry in advanced LOL but I have some questions.

Im confused on how the case is suppose to look. Will it look like whats in this? http://deskthority.net/marketplace-f11/acrylic-case-for-filco-tenkeyless-keyboard-t1804.html


With the top part being covered as shown in the pictures above?

And then how would I install this case? Is there a guide online somewhere? Do I just take off the casing of my keyboard and place the plate or pcb or whatever into the acrylic case?

[sprit]

.... And then how would I install this case? Is there a guide online somewhere? Do I just take off the casing of my keyboard and place the plate or pcb or whatever into the acrylic case?

It varies depends on the PCB and plate designs.

PCB + Plate + Case  Structure : 

You may look into some Pics in GH, You will understand soon.     

[longweight]

Hey Sprit,
I haven't received an invoice?
 
 

[sprit]

For A Reformation of The Case Structure 

http://www1.kbdmania.net/xe/photo/7577370
http://www1.kbdmania.net/xe/market_info/7692061   
 

  "   새로운 기판에서는, 기존에 대다수를 차지했던,  보강판에 장착해 공중부양으로 고정하는 방식을 포함해
다음의 5가지 이상의 장착방식이 가능합니다  (억지 분류지만, 그외 다른 방법도 우리 동호인들이 개발할 수 있을 겁니다)
갑자기 나온 것이 아니라  이미 묻고답하기 등의 게시판에서 자주 토론되던 내용입니다


1.  보강판 + 기판을  하우징 중앙/상부에 걸치고, 보강판만 고정하는 기존 방식  = 공진울림이 다소 강하다는 지적이 많음.
2.  보강판 + 기판을  하판에 고정하는 방식 1  = 기성품에 흔한 방식, 미니에선 포커 2 등이 대표적. 
     타이핑시 타격 에너지가 기판전체와 보강판에 골고루 분산흡수되어 케이스의 울림과 공진에너지량이 감소하는 효과가 있음.
3.  보강판 + 기판을  하판에 고정하는 방식 2  =   기성품에 흔한 방식. 위 방식과 유사.

4.  기판만 하판에 고정하는 방식 (무보강판 방식)  = 체리 순정 키보드에 흔한 방식. 1800, 3000 등이 대표적.
5.  기판을 상판에 고정하는 방식 (무보강판 방식) = Dolch 1800 키보드의 경우처럼 기판을 상판에 고정하고 하판이 받쳐주는 경우.


Trans (Simple)
   
" This New Method enables at least  5 ways of PCB mount connections,  due to a New Structure....
   
1.  Plate + PCB  : Connected to the Top of the case  :  No support from the Bottom,  Hanging in the air. Stronger Sound Resonance.
2.  Plate + PCB  : Connected to the Bottom of the case  :  Very Common in Keyboard industry. IBM, Apple, HP, ..
3.  Plate + PCB  : Connected to the Bottom of the case (2)  :  Very Common in Keyboard industry, leopold, Filco, Ducky ... 
4.  No Plate, Only PCB  : Connected to the Bottom of the case  :  Very Common in Keyboard industry, Cherry 1800, 3000 .... 
5.  No Plate, Only PCB  : Connected to Top cover of the case : Reversed connection to the Top cover.  Dolch 1800, HHKB  ... a lot..

   
http://www.youtube.com/watch?v=fCsiHj26REo     http://www.youtube.com/watch?v=_AAOeNjOK6U     http://www.youtube.com/watch?v=AR32YMBvFsI      http://www.youtube.com/watch?v=lOzhfI3MN1c      ...  Long United will be divied,  long divided will be United...

[Signature]

For A Reformation of The Case Structure 


http://www1.kbdmania.net/xe/market_info/7692061   
 

  "   새로운 기판에서는, 기존에 대다수를 차지했던,  보강판에 장착해 공중부양으로 고정하는 방식을 포함해
다음의 5가지 이상의 장착방식이 가능합니다  (억지 분류지만, 그외 다른 방법도 우리 동호인들이 개발할 수 있을 겁니다)
갑자기 나온 것이 아니라  이미 묻고답하기 등의 게시판에서 자주 토론되던 내용입니다
What does this mean?

1.  보강판 + 기판을  하우징 중앙/상부에 걸치고, 보강판만 고정하는 기존 방식  = 공진울림이 다소 강하다는 지적이 많음.
2.  보강판 + 기판을  하판에 고정하는 방식 1  = 기성품에 흔한 방식, 미니에선 포커 2 등이 대표적. 
    타이핑시 타격 에너지가 기판전체와 보강판에 골고루 분산흡수되어 케이스의 울림과 공진에너지량이 감소하는 효과가 있음.
3.  보강판 + 기판을  하판에 고정하는 방식 2  =   기성품에 흔한 방식. 위 방식과 유사.

4.  기판만 하판에 고정하는 방식 (무보강판 방식)  = 체리 순정 키보드에 흔한 방식. 1800, 3000 등이 대표적.
5.  기판을 상판에 고정하는 방식 (무보강판 방식) = 돌치 1800 키보드의 경우처럼 기판을 상판에 고정하고 하판이 받쳐주는 경우.


http://www.youtube.com/watch?v=fCsiHj26REo 

http://www.youtube.com/watch?v=_AAOeNjOK6U 

http://www.youtube.com/watch?v=AR32YMBvFsI     ...  Long United will be divied,  long divided will be United...

Translate?

[naokira]

Hey Sprit,
I haven't received an invoice?

Me too bro. He said he's fixing his paypal setup with his bank.

[sprit]

Hey Sprit,
I haven't received an invoice?

Me too bro. He said he's fixing his paypal setup with his bank.

Hello  Good Morning!~               

http://www.youtube.com/watch?v=lOzhfI3MN1c   
http://www.youtube.com/watch?v=2a_4EKLBs9M   
http://www.youtube.com/watch?v=lzziudBU6qk

[bazemk1979]

sprit im still waiting on pics from the full board in acrylic, acrylic/metal and metal.....

[AKmalamute]

Hello  Good Morning!~               

http://www.youtube.com/watch?v=lOzhfI3MN1c   

So, Bob Marley has your bank card? I could see where that could cause troubles.
Hopefully you'll be able to banish your troubles soon.

Still looking forward to the ALPs PCB.

[sprit]

sprit im still waiting on pics from the full board in acrylic, acrylic/metal and metal.....

Aluminum Toxicity     ::

Aluminum Intoxication   :::

Aluminum Intoxication Symptom   :::::

[sprit]

Hello  Good Morning!~               

http://www.youtube.com/watch?v=lOzhfI3MN1c   

So, Bob Marley has your bank card? I could see where that could cause troubles.
Hopefully you'll be able to banish your troubles soon.

Still looking forward to the ALPs PCB.

Yes! He is the holder of Me, and Bank Carte, and My ipad mini memory Capacity.

Soon Fix Paypal and Tax Setup !    Then ALPs and Metal!  Thx!   

[keymaster]

so excited for this 

[swill]

Hey Sprit, does your 75% PCB support a center stem caps lock?  I just looked at your pictures and it doesn't look like it does.  I would be really disappointed if it doesn't support a center stem caps lock...

[keymaster]

Hey Sprit, does your 75% PCB support a center stem caps lock?  I just looked at your pictures and it doesn't look like it does.  I would be really disappointed if it doesn't support a center stem caps lock...

I don't mean any offense, but is that really a dealbreaker for you? It really doesn't seem like a big deal.

Edit:

[swill]

Hey Sprit, does your 75% PCB support a center stem caps lock?  I just looked at your pictures and it doesn't look like it does.  I would be really disappointed if it doesn't support a center stem caps lock...

I don't mean any offense, but is that really a dealbreaker for you? It really doesn't seem like a big deal.

Edit:

Show Image

Ya I saw that.  If I want to switch my Ctrl and Caps Lock, then yes, it is a bit of a deal breaker.  I will be using that key all the time and I find center stem much more comfortable...