[SPRiT] R1 R2 (Shipping 92% Completed)

[sprit]

Hey Sprit, does your 75% PCB support a center stem caps lock?  I just looked at your pictures and it doesn't look like it does.  I would be really disappointed if it doesn't support a center stem caps lock...

Deer!  Swill        Enough Snows there ?

Our GH Version Latest PCBs Support All the Cherry + Filco  Standards!! 

i prefer the Center Caps  and Center Space in person

[sprit]

I don't mean any offense, but is that really a dealbreaker for you? It really doesn't seem like a big deal.

Hello~   Dear Keymaster !
Thanks!   

[sprit]

About  Our  PCB !     
       
For Example,  Korean U vesion PCBs have No Center Space, NO ISO supports.   http://winkeyless.kr



But Now You See some Latest Korean U version has Center Space and ISO supports.   http://winkeyless.kr



Our GH Version will have All and More !  (ANSI+ISO, Support Holes for PCB, Better LED Effects... ) No show on http://winkeyless.kr  Thanks to The GH Team, Mr. JDcarpe and Mr. Dorkvader.
   

 

[sprit]

News For Us  : 

The Latest Firmware  :  Everyone Invited! 
   
The Max. Electric Current set to 500mA ... Test Done!         on  Nov.30th .....
   
     
http://winkeyless.kr/95     http://winkeyless.kr/17     https://github.com/showjean/ps2avrU   


Thanks to The GH Team,  Mr. JDcarpe, Mr.mashby and Mr. Dorkvader.
     



   

[swill]

Found this.  So yes, it does support a center stem caps lock.  Thanks Sprit...

[sprit]

Found this.  So yes, it does support a center stem caps lock.  Thanks Sprit...

Show Image

 
 Thanks Deer, Swill !   Yes! 60% 75%  87%  hit the MOQ!   ;)   
 

[sprit]

 
Metal :  Pre-Check for MOQ  and Design ( = Reservation)   

-  GB will start after this Check

-  No Check, No Sale !   
   
https://docs.google.com/forms/d/1aMk5aG9l8dlwLBTAS9D-VMRm-xWmi69cpkRDgy_k1lI/viewform 

[bazh]

were the 2nd batch's invoices send out today ?

[pichu23]

Ugpm.

[sprit]

were the 2nd batch's invoices send out today ?

Nob!  I am busy Now..Plz, Dont ask me the same Question Too Much !.  Sorry!          I will Notice it on OP When It is OK! 

[Permeability]

Hi sprit,

Can you respond to my PM when you  have time?  I need to make an order change, sorry!

[bazh]

were the 2nd batch's invoices send out today ?

Nob!  I am busy Now..Plz, Dont ask me the same Question Too Much !.  Sorry!          I will Notice it on OP When It is OK!

ok, just want to make sure, sorry guy 

[dorkvader]

News For Us  : 

The Latest Firmware  :  Everyone Invited! 
   
The Max. Electric Current set to 500mA ... Test Done!         on  Nov.30th .....
   
     
http://winkeyless.kr/95     http://winkeyless.kr/17     https://github.com/showjean/ps2avrU
     



   

Excellent! This is good to hear that proper testing is being done.

[cookiesowns]

Still waiting for more pictures of PCB & Top cover.

Pictures wanted for Plate too!

Are the cherry MX plate or pcb mounted?

[sprit]

Still waiting for more pictures of PCB & Top cover.

Pictures wanted for Plate too!

Are the cherry MX plate or pcb mounted?

Plz Write Down Yor Order Form now, Or It will be Too late! 

[justnits]

sprit, i have sent in order form for acrylic plate...see if u have received it?

[sprit]

sprit, i have sent in order form for acrylic plate...see if u have received it?

Yes!  My friend,  justnits!
All Yours saved to the GoogleDoc, and My BackUp Storages.      

[justnits]

thanks sprit!
i'll wait for your invoice after your paypal got sorted out

[cookiesowns]

Still waiting for more pictures of PCB & Top cover.

Pictures wanted for Plate too!

Are the cherry MX plate or pcb mounted?

Plz Write Down Yor Order Form now, Or It will be Too late! 

Sent in order Form! If you can please confirm the ordered stuff ( should be 3 separate ones ) via PM that would be great!

Can you answer my question however for Cherry MX Switch. Are they plate or PCB mounted?

Any pictures/suggestion of Plate & top cover? Will there be a top cover for 87% and 110% case?

[YongJK]

For A Reformation of The Case Structure 

http://www1.kbdmania.net/xe/photo/7577370
http://www1.kbdmania.net/xe/market_info/7692061   
 

  "   새로운 기판에서는, 기존에 대다수를 차지했던,  보강판에 장착해 공중부양으로 고정하는 방식을 포함해
다음의 5가지 이상의 장착방식이 가능합니다  (억지 분류지만, 그외 다른 방법도 우리 동호인들이 개발할 수 있을 겁니다)
갑자기 나온 것이 아니라  이미 묻고답하기 등의 게시판에서 자주 토론되던 내용입니다


1.  보강판 + 기판을  하우징 중앙/상부에 걸치고, 보강판만 고정하는 기존 방식  = 공진울림이 다소 강하다는 지적이 많음.
2.  보강판 + 기판을  하판에 고정하는 방식 1  = 기성품에 흔한 방식, 미니에선 포커 2 등이 대표적. 
    타이핑시 타격 에너지가 기판전체와 보강판에 골고루 분산흡수되어 케이스의 울림과 공진에너지량이 감소하는 효과가 있음.
3.  보강판 + 기판을  하판에 고정하는 방식 2  =   기성품에 흔한 방식. 위 방식과 유사.

4.  기판만 하판에 고정하는 방식 (무보강판 방식)  = 체리 순정 키보드에 흔한 방식. 1800, 3000 등이 대표적.
5.  기판을 상판에 고정하는 방식 (무보강판 방식) = Dolch 1800 키보드의 경우처럼 기판을 상판에 고정하고 하판이 받쳐주는 경우.


Trans (Simple)
   
" This New Method enables at least  5 ways of PCB mount connections,  due to a New Structure....
   
1.  Plate + PCB  : Connected to the Top of the case  :  No support from the Bottom,  Hanging in the air. Stronger Sound Resonance.
2.  Plate + PCB  : Connected to the Bottom of the case  :  Very Common in Keyboard industry. IBM, Apple, HP, ..
3.  Plate + PCB  : Connected to the Bottom of the case (2)  :  Very Common in Keyboard industry, leopold, Filco, Ducky ... 
4.  No Plate, Only PCB  : Connected to the Bottom of the case  :  Very Common in Keyboard industry, Cherry 1800, 3000 .... 
5.  No Plate, Only PCB  : Connected to Top cover of the case : Reversed connection to the Top cover.  Dolch 1800, HHKB  ... a lot..

   
http://www.youtube.com/watch?v=fCsiHj26REo     http://www.youtube.com/watch?v=_AAOeNjOK6U     http://www.youtube.com/watch?v=AR32YMBvFsI      http://www.youtube.com/watch?v=lOzhfI3MN1c      ...  Long United will be divied,  long divided will be United...

That means I can have plate+pcb mount on acrylic case ? 

[sprit]

That means I can have plate+pcb mount on acrylic case ? 

90% possible  In my opinion!

[justnits]

sprit, the stabs that you are looking from suppliers, are they pcb mount or plate mount type?

[sprit]

sprit, the stabs that you are looking from suppliers, are they pcb mount or plate mount type?

Both! Sir ! 

[sprit]

Hi sprit,

Can you respond to my PM when you  have time?  I need to make an order change, sorry!

No Problemo!   I got your PM !   I will put all the new Orders in Your New Invoice ! 

Good  Day!   oh!   Sunday! 

[sprit]

 

[swill]

Not sure if this is the best place to ask this, but what size spacebar is used on a 75% board?  Is it a 6.25?

[sprit]

[sprit]

 
 
My Better Board...  Much More Comfy than The Metal Frame ...




" Hey! ... Bunch of Immetal Lovers Out There ... "  ... muss es sein? 

   

[sprit]

Not sure if this is the best place to ask this, but what size spacebar is used on a 75% board?  Is it a 6.25?

6.25x  and  7x      all my PCBs support  6.25x  and  7x 

[ninjadoc]

For A Reformation of The Case Structure 

http://www1.kbdmania.net/xe/photo/7577370
http://www1.kbdmania.net/xe/market_info/7692061   
 

  "   새로운 기판에서는, 기존에 대다수를 차지했던,  보강판에 장착해 공중부양으로 고정하는 방식을 포함해
다음의 5가지 이상의 장착방식이 가능합니다  (억지 분류지만, 그외 다른 방법도 우리 동호인들이 개발할 수 있을 겁니다)
갑자기 나온 것이 아니라  이미 묻고답하기 등의 게시판에서 자주 토론되던 내용입니다


1.  보강판 + 기판을  하우징 중앙/상부에 걸치고, 보강판만 고정하는 기존 방식  = 공진울림이 다소 강하다는 지적이 많음.
2.  보강판 + 기판을  하판에 고정하는 방식 1  = 기성품에 흔한 방식, 미니에선 포커 2 등이 대표적. 
     타이핑시 타격 에너지가 기판전체와 보강판에 골고루 분산흡수되어 케이스의 울림과 공진에너지량이 감소하는 효과가 있음.
3.  보강판 + 기판을  하판에 고정하는 방식 2  =   기성품에 흔한 방식. 위 방식과 유사.

4.  기판만 하판에 고정하는 방식 (무보강판 방식)  = 체리 순정 키보드에 흔한 방식. 1800, 3000 등이 대표적.
5.  기판을 상판에 고정하는 방식 (무보강판 방식) = Dolch 1800 키보드의 경우처럼 기판을 상판에 고정하고 하판이 받쳐주는 경우.


Trans (Simple)
   
" This New Method enables at least  5 ways of PCB mount connections,  due to a New Structure....
   
1.  Plate + PCB  : Connected to the Top of the case  :  No support from the Bottom,  Hanging in the air. Stronger Sound Resonance.
2.  Plate + PCB  : Connected to the Bottom of the case  :  Very Common in Keyboard industry. IBM, Apple, HP, ..
3.  Plate + PCB  : Connected to the Bottom of the case (2)  :  Very Common in Keyboard industry, leopold, Filco, Ducky ... 
4.  No Plate, Only PCB  : Connected to the Bottom of the case  :  Very Common in Keyboard industry, Cherry 1800, 3000 .... 
5.  No Plate, Only PCB  : Connected to Top cover of the case : Reversed connection to the Top cover.  Dolch 1800, HHKB  ... a lot..

   
http://www.youtube.com/watch?v=fCsiHj26REo     http://www.youtube.com/watch?v=_AAOeNjOK6U     http://www.youtube.com/watch?v=AR32YMBvFsI      http://www.youtube.com/watch?v=lOzhfI3MN1c      ...  Long United will be divied,  long divided will be United...

Before I commit to a case want to see a full picture - top, bottom, sides - preferably with a plate and PCB in it.
http://www.otd.kr/bbs/board.php?bo_table=album&wr_id=177350
Is a link I found in one of sprit's post on kbdmania but I'm not clear if it is one of his cases - it is an album but his name is not attached to it.

[cookiesowns]

Still waiting for more pictures of PCB & Top cover.

Pictures wanted for Plate too!

Are the cherry MX plate or pcb mounted?

Plz Write Down Yor Order Form now, Or It will be Too late! 

Sent in order Form! If you can please confirm the ordered stuff ( should be 3 separate ones ) via PM that would be great!

Can you answer my question however for Cherry MX Switch. Are they plate or PCB mounted?

Any pictures/suggestion of Plate & top cover? Will there be a top cover for 87% and 110% case?

Still waiting for more pictures of PCB & Top cover.

Pictures wanted for Plate too!

Are the cherry MX plate or pcb mounted?

Plz Write Down Yor Order Form now, Or It will be Too late! 

Sent in order Form! If you can please confirm the ordered stuff ( should be 3 separate ones ) via PM that would be great!

Can you answer my question however for Cherry MX Switch. Are they plate or PCB mounted?

Any pictures/suggestion of Plate & top cover? Will there be a top cover for 87% and 110% case?

Hi Sprit, I know you're busy, but can you take a look above? I'll be getting quite a bit of PCB & Cases, ( 3-4 PCB, and 4-5 plates ) as well as cases. So it would be awesome if you can answer these questions prior to the invoice sent out. So I can just give you a final decision!!!

Also will the stabilizers be included, or would that be a separate group buy. What about round 3 for cases?

[justnits]

For A Reformation of The Case Structure 

http://www1.kbdmania.net/xe/photo/7577370
http://www1.kbdmania.net/xe/market_info/7692061   
 

  "   새로운 기판에서는, 기존에 대다수를 차지했던,  보강판에 장착해 공중부양으로 고정하는 방식을 포함해
다음의 5가지 이상의 장착방식이 가능합니다  (억지 분류지만, 그외 다른 방법도 우리 동호인들이 개발할 수 있을 겁니다)
갑자기 나온 것이 아니라  이미 묻고답하기 등의 게시판에서 자주 토론되던 내용입니다


1.  보강판 + 기판을  하우징 중앙/상부에 걸치고, 보강판만 고정하는 기존 방식  = 공진울림이 다소 강하다는 지적이 많음.
2.  보강판 + 기판을  하판에 고정하는 방식 1  = 기성품에 흔한 방식, 미니에선 포커 2 등이 대표적. 
     타이핑시 타격 에너지가 기판전체와 보강판에 골고루 분산흡수되어 케이스의 울림과 공진에너지량이 감소하는 효과가 있음.
3.  보강판 + 기판을  하판에 고정하는 방식 2  =   기성품에 흔한 방식. 위 방식과 유사.

4.  기판만 하판에 고정하는 방식 (무보강판 방식)  = 체리 순정 키보드에 흔한 방식. 1800, 3000 등이 대표적.
5.  기판을 상판에 고정하는 방식 (무보강판 방식) = Dolch 1800 키보드의 경우처럼 기판을 상판에 고정하고 하판이 받쳐주는 경우.


Trans (Simple)
   
" This New Method enables at least  5 ways of PCB mount connections,  due to a New Structure....
   
1.  Plate + PCB  : Connected to the Top of the case  :  No support from the Bottom,  Hanging in the air. Stronger Sound Resonance.
2.  Plate + PCB  : Connected to the Bottom of the case  :  Very Common in Keyboard industry. IBM, Apple, HP, ..
3.  Plate + PCB  : Connected to the Bottom of the case (2)  :  Very Common in Keyboard industry, leopold, Filco, Ducky ... 
4.  No Plate, Only PCB  : Connected to the Bottom of the case  :  Very Common in Keyboard industry, Cherry 1800, 3000 .... 
5.  No Plate, Only PCB  : Connected to Top cover of the case : Reversed connection to the Top cover.  Dolch 1800, HHKB  ... a lot..

   
http://www.youtube.com/watch?v=fCsiHj26REo     http://www.youtube.com/watch?v=_AAOeNjOK6U     http://www.youtube.com/watch?v=AR32YMBvFsI      http://www.youtube.com/watch?v=lOzhfI3MN1c      ...  Long United will be divied,  long divided will be United...

Before I commit to a case want to see a full picture - top, bottom, sides - preferably with a plate and PCB in it.
http://www.otd.kr/bbs/board.php?bo_table=album&wr_id=177350
Is a link I found in one of sprit's post on kbdmania but I'm not clear if it is one of his cases - it is an album but his name is not attached to it.

that case isn't sprit's. it's Lewi or LinLin's case and wrist rest.

[sprit]

Hi Sprit, I know you're busy, but can you take a look above? I'll be getting quite a bit of PCB & Cases, ( 3-4 PCB, and 4-5 plates ) as well as cases. So it would be awesome if you can answer these questions prior to the invoice sent out. So I can just give you a final decision!!!

Also will the stabilizers be included, or would that be a separate group buy. What about round 3 for cases?

Hello!  Good Morning !  1 min plz!

Your Order is :
PCB  87%   3   
PCB  110 %  1
Case  110%  1
and some others     All  Identified and well saved  to Google and My Storages.       

[justnits]

sprit, since i just ordered the acrylic case few days ago and your paypal isn't working yet, will the case be in first production or join round 2 batch?

[sprit]

sprit, since i just ordered the acrylic case few days ago and your paypal isn't working yet, will the case be in first production or join round 2 batch?

1st or 2nd Batch, Does It Really matter to You?  My friend justnits ?       

On Weekend, everyone and bank supposed to have a break, I guess, doesnt It?            I am a Very Slow Korean, Please Remember that!    

[justnits]

sorry, it's already monday morning (going to be afternoon) in my area, forgot that almost half of the world is still in Sunday

was just wondering about it since what i understand is that 2nd batch will start when it reaches it's MOQ? so it will be slower compared to first batch.

[nuclearsandwich]

sorry, it's already monday morning (going to be afternoon) in my area, forgot that almost half of the world is still in Sunday

was just wondering about it since what i understand is that 2nd batch will start when it reaches it's MOQ? so it will be slower compared to first batch.

Either production has already started for the first round or the entire first round will be delayed so sprit can process payments. If you met MOQ in round 1 you're probably fine.

[sprit]

I Put it down On the First Page, like this : 
   
All the Invoices will send Slowly in this week!   
Pay Slow, No Rush!  please

[sprit]

For the 1st Batch (Order),  I did put my own extra orders to meet each MOQ. 
  
The 2nd week Orders give more for the Total MOQ.   
 
All MOQ for PCBs are OK!    No Problem at All!       Thanks to KeyBoard Goddess !     
 
Please, Give some Time to process all !   

Who buggs me Extreamly too much, will be excluded from the Next Order.   

I am not a saint at all.   Sorry!

       

 

[cookiesowns]

Hi Sprit, I know you're busy, but can you take a look above? I'll be getting quite a bit of PCB & Cases, ( 3-4 PCB, and 4-5 plates ) as well as cases. So it would be awesome if you can answer these questions prior to the invoice sent out. So I can just give you a final decision!!!

Also will the stabilizers be included, or would that be a separate group buy. What about round 3 for cases?

Hello!  Good Morning !  1 min plz!

Your Order is :
PCB  87%   3   
PCB  110 %  1
Case  110%  1
and some others     All  Identified and well saved  to Google and My Storages.   

Sent you PM =)

Thank you for the hard work Sprit, awesome stuff. I really wish there was just more picture or examples of the cases, so I can solidify my decision. WAYY TOO MANY CHOICES~!

[HPE1000]

Do you think round 1 will be shipped before Christmas or the end of the year? 

[cookiesowns]

For the 1st Batch (Order),  I did put my own extra orders to meet each MOQ. 
  
The 2nd week Orders give more for the Total MOQ.   
 
All MOQ for PCBs are OK!    No Problem at All!       Thanks to KeyBoard Goddess !     
 
Please, Give some Time to process all !   

Who buggs me Extreamly too much, will be excluded from the Next Order.   

I am not a saint at all.   Sorry!

       

 

I hope I'm not one of those people!!! Really want to make sure I make the right decisions, I'm the type of person that prefers to shop right, and at one shop, instead of sourcing with a variety of different shops, so I hope you understand SPRiT!!

Again, thank you for all the help! Can't wait!

[sprit]

Do you think round 1 will be shipped before Christmas or the end of the year? 

Which Christmas,  Orthodox or Catholic?, Which Calendar Sir?      

I Hope So,  to Any Kalendar!

[stoic-lemon]

Do you think round 1 will be shipped before Christmas or the end of the year? 

Which Christmas,  Orthodox or Catholic?, Which Calendar Sir?      

Haha! Best answer ever!

[HPE1000]

Do you think round 1 will be shipped before Christmas or the end of the year? 

Which Christmas,  Orthodox or Catholic?, Which Calendar Sir?      

I Hope So,  to Any Kalendar!

By the 25th of December

[sprit]

" Ok! What's NeXT? " 


  " A Proper Case, Buddy "

[sprit]

" My Better Board...  Much More Comfy than The Metal Frame ..."



" Hey! ... Bunch of MetaLLL Lovers Out There ... "  ....  They Are Kraziiiiiii

[Computer-Lab in Basement]

Still haven't gotten an invoice or confirmation email. Not complaining, I can't pay the invoice right now anyways, just wondering if I fell between the cracks or something and my order was lost...

[sprit]

Still haven't gotten an invoice or confirmation email. Not complaining, I can't pay the invoice right now anyways, just wondering if I fell between the cracks or something and my order was lost...

Paypal Initial Setup Procedures! Captain!      Your Confirmation & Invoice Email will come!    I've sealed the Cracks with my own sealants.


We can wait till Wednesday this Week, They Say.

[Latin00032]

Hey Sprit,

Did I sign up for the metal case moq check?

I don't remember. I don't want to put a duplicate.

Thanks.