[SPRiT] R1 R2 (Shipping 92% Completed)

[cookiesowns]

Notice !

The Invoices for the Orders from Nov.17-20  Will sent Tomorrow!

Thanks For Your Patience!!      

Sent you a PM sprit! =)

Also, do people recommend plate mounted switch or PCB mounted? I have plates of course.

[bazh]

yay, hope I'm on the list

[bakteria]

You have PM Spirit!

[Jinryuixi]

Invoice nº 1309 paid! I want to know if you recieved it correctly!

It has to be this one:


The "frosty" color it's a light blue, right?

[AlexJP]

Hello Sprit...
Could you check my order? its a 60% pcb black, a lime green (3 parts) polyacryl case, 110 clears switches, and some 80gr springs, green leds and 20 multicolours leds. almost  forgot... a 5mm plate too

Really  anxious for this : ) 


 

btw: again.. amazing work, amazing GB and amazing you!

[swill]

Notice !

The Invoices for the Orders from Nov.17-20  Will sent Tomorrow!

Thanks For Your Patience!!      

Sent you a PM sprit! =)

Also, do people recommend plate mounted switch or PCB mounted? I have plates of course.

I would recommend getting PCB mounted switches because they are more versatile.  If you want to do PCB mounted, you have the option.  If you want to do plate mounted, you just clipping off the plastic bits on the bottom of the switch and they are now plate mounted switches. 

[swill]

This might be a stupid question, but do these PCBs support USB?

[Signature]

This might be a stupid question, but do these PCBs support USB?

THey are mini USB if im not mistaken!

[swill]

This might be a stupid question, but do these PCBs support USB?

THey are mini USB if im not mistaken!

I found the answer.  I remembered that I had seen ps2avr, but it was actually ps2avrU.  Here is a link to the firmware: http://winkeyless.kr/entry/ps2avrU-firmware-%EB%B0%8F-utility (use google translate).

It says: "ps2avrU - PS / 2 and USB interface supports both the new firmware."

[gimpster]

Order placed for pcb and plates.

Pre-check placed for metal case (Sure hope this comes through).

[AKmalamute]

I'd love to get 10lbs of aluminum case ... but I can't until at least March ... and it might not work out even then. But I'd love to see them made / shipped so I can buy a spare in the classifieds if it turns out I have the dough at that time.

I have a request, regarding the ALPS boards. Since I suspect a fair number of us wanting that series already have, and are satisfied with, our own switch supply ... Spirit, can you consider making the boards available sans newly minted korean switches?

I really appreciate that you're making this GB a one-stop-shop for do it yourselfer's needs. But it's okay too, to provide just the PCBs and say "This is all I have. Get the rest elsewhere."

I bet if you did, you could still move 50 Alps boards easily enough ... one wave down, the third wave for pcb+switch kits.

[Zeal]

I've always wondered, why can't you use PCB mounted switches in a plate mounted design without clipping the two tabs? Doesn't this PCB support both types of switches? So, since there are already two extra holes, wouldn't keeping the two tabs on the switch increase the rigidity of the switch when plate mounting? Or am I blatantly ignorant/blind? Haha

Anyone care to enlighten me?

[AKmalamute]

I'd ways wondered, why can't you use PCB mounted switches in a plate mounted design

Having never done it, I'm pretty sure the holes for PCB-mount are the issue. So you could, so far as I know, use PCB (/NW) switches inside a plate. Making everything line up might be more work but that would be about the only issue.

[archer]

Hey Sprit,

Just sent you payment for the following invoice:

#1232 - 87% Acryl case: Clear/Frosty/Clear

Could you please verify that this is for a Filco compatible case (it should be!). The colors are correct.

Thanks again for organizing all of this!

[exitface]

Paid invoices #1274 and #1261, thanks Sprit!

[gimpster]

I've always wondered, why can't you use PCB mounted switches in a plate mounted design without clipping the two tabs? Doesn't this PCB support both types of switches? So, since there are already two extra holes, wouldn't keeping the two tabs on the switch increase the rigidity of the switch when plate mounting? Or am I blatantly ignorant/blind? Haha

Anyone care to enlighten me?

I've done this on two keyboards. So long as the PCB has the holes drilled for the stabilizer pins, then you can leave them on. In fact, I prefer to do this because it makes for an even more stable switch with the plate. I can feel the difference on a standard "sheet" plate, but it's really not noticeable on a thick plate, like the MX Mini or like the 4/5mm plates being offered here. Still, it's one less task to do when you're assembling things, so I would leave them on.

[cultofjosh]

Invoice #1303 paid!

I hope you do more buys in the future so I can get some of your cases

[cookiesowns]

Heyo,

Anyone know if it's Micro USB or Mini-USB?

http://winkeyless.kr/49

Looks to me like USB Mini?

[sprit]

Sorry for Late Answer to the PM (Personal Message) :  I got Family Meet Ups on this Weekend!

mini USB !

[longweight]

I still have not received an invoice?

[IMHB]

I still have not received an invoice?

Same here...only received 1 60% case invoice and payed....still have pcb+plate and another 80% case invoices which I didn't get....

[AlexJP]

Me neither

[sprit]

I am sending Invoices By Today!       
   
 
Payment become so Slow for this 1st Round.   
It tooK too much Time to make HongKong Paypal Guys to understand What is GB.
If you need, PM me plz!     

Thank You Guys!           

[AlexJP]

First invoice paid! 
(pcb, switches, plate, springs and leds)

now just need the case (limegreen, limegreen, limegreen)

 

Thanks Sprit

[sprit]

First invoice paid! 
(pcb, switches, plate, springs and leds)

now just need the case (limegreen, limegreen, limegreen)

 

Thanks Sprit

Green Limes Sent!      

[AlexJP]

Thank you Mr Sprit.   

both invoices 1317 and 1318 paid.

I hope this GB continues on much more time so I can purchase the other keyboards.

ps: sorry for causing trouble with the first orders.

 

[Latin00032]

I thought we would have reached moq for metal cases by now.

[sprit]

I thought we would have reached moq for metal cases by now.

Hello!  Mr. Latin00032 !

Not well answered,  But  I will Show The Metal Proto in This Week!   

[sprit]

Thank you Mr Sprit.   

both invoices 1317 and 1318 paid.

I hope this GB continues on much more time so I can purchase the other keyboards.

ps: sorry for causing trouble with the first orders.

 

Great Thanks Guys!  for Your Patience  for my Paypal resetup issues!          It Took too Long! 


Have a Nice Weekend All!!

[tjweir]

I still have not received an invoice?

Me either.  Just adding my comment so I don't miss out on this. 

Thanks Sprit!

[cookiesowns]

Thank you Mr Sprit.   

both invoices 1317 and 1318 paid.

I hope this GB continues on much more time so I can purchase the other keyboards.

ps: sorry for causing trouble with the first orders.

 

Great Thanks Guys!  for Your Patience  for my Paypal resetup issues!          It Took too Long! 


Have a Nice Weekend All!!

Hi Sprit,

I sent you PM regarding invoices.

[quochung1989]

Do you send all invoice, sprit? I still don't receive your invoice

[pasph]

I want to change my shipping address.
Sent you a PM.

[sprit]

I want to change my shipping address.
Sent you a PM.

OK  I Send me PM !   

[sprit]

I am Sending the Last Invoices !  Sorry For late!    

[bakteria]

Havent recieved a reply from you yet Spirit.
I ordered 90 switches but it said 110 on the receipt. I did however pay because I was afraid of missing out.
So would it be too much of a bother if I got 90 clear switches and 20 black switches?
Also I'd like plate switches.

[sprit]

Havent recieved a reply from you yet Spirit.
I ordered 90 switches but it said 110 on the receipt. I did however pay because I was afraid of missing out.
So would it be too much of a bother if I got 90 clear switches and 20 black switches?
Also I'd like plate switches.

GodMorgon !   1 Sec plz  !     

OK!  I can do  90 Clear + 20 Black SW!       Thank You Mr. BakTeria!  Sorry For late Answer!!



I changed It to 90 Clear + 20 Black SW !

[swill]

Havent recieved a reply from you yet Spirit.
I ordered 90 switches but it said 110 on the receipt. I did however pay because I was afraid of missing out.
So would it be too much of a bother if I got 90 clear switches and 20 black switches?
Also I'd like plate switches.

My understanding is that if you are using this PCB, then you can use PCB mounted switches even with a plate.  If you are using most on this pcb and the rest on a different pate mounted pcb which does not have the holes, you can always just clip those switches. 

[bakteria]

Havent recieved a reply from you yet Spirit.
I ordered 90 switches but it said 110 on the receipt. I did however pay because I was afraid of missing out.
So would it be too much of a bother if I got 90 clear switches and 20 black switches?
Also I'd like plate switches.

GodMorgon !   1 Sec plz  !     

OK!  I can do  90 Clear + 20 Black SW!       Thank You Mr. BakTeria!  Sorry For late Answer!!

(Attachment Link)

I changed It to 90 Clear + 20 Black SW !


(Attachment Link)

Tack så mycket Spirit! You are 50 shades of awesome! And since the pcb switches fit on this with plate go for pcb.

Havent recieved a reply from you yet Spirit.
I ordered 90 switches but it said 110 on the receipt. I did however pay because I was afraid of missing out.
So would it be too much of a bother if I got 90 clear switches and 20 black switches?
Also I'd like plate switches.

My understanding is that if you are using this PCB, then you can use PCB mounted switches even with a plate.  If you are using most on this pcb and the rest on a different pate mounted pcb which does not have the holes, you can always just clip those switches.

Thank you for clearing this up for me.

[justnits]

sprit, have u receive my PM?
sorry about sending u PM twice...i thought i didn't send u the first time >.<

[sprit]

sprit, have u receive my PM?
sorry about sending u PM twice...i thought i didn't send u the first time >.<

Your Acryl Case is already in Production, So It's not Easy to change at this moment.   
And the Refund is not Possible, for this is a GroupBuy, meet MOQ for all the members.
Sorry for that !      

[justnits]

alright, sure no problem with that

[sprit]

alright, sure no problem with that

Really Sorry For that,  If It had been 1 week earler!   

[justnits]

no worries sprit, i'm still very eager to see your metal case

[bazh]

I still don't get the invoice, I'm really worried about this right now

[cookiesowns]

alright, sure no problem with that

Really Sorry For that,  If It had been 1 week earler!   

Sprit, I sent you an PM, not sure if you got them. I need the PayPal invoice e-mail changed, and it seems like there was an error about on the invoice.

[keymaster]

Paid my invoice and received notice of shipment currently pending.

 

[sprit]

alright, sure no problem with that

Really Sorry For that,  If It had been 1 week earler!   

Sprit, I sent you an PM, not sure if you got them. I need the PayPal invoice e-mail changed, and it seems like there was an error about on the invoice.

OK  I am sending the last Invoices Now, and  I will check Your Invoice Soon!  Sooorrry for any Errors!!      

[jorgenslee]

Hi Sprit, Good day and I hope you have a great weekend with your family. I would like to ask if my order will be included in this batch of invoices you have sent and will send. Thanks

[cookiesowns]

alright, sure no problem with that

Really Sorry For that,  If It had been 1 week earler!   

Sprit, I sent you an PM, not sure if you got them. I need the PayPal invoice e-mail changed, and it seems like there was an error about on the invoice.

OK  I am sending the last Invoices Now, and  I will check Your Invoice Soon!  Sooorrry for any Errors!!   

Great! Thanks for all the hard work Sprit!

Another question to be sure: It goes from Bottom to top right? So the first option ( bottom ) on the form, is the part where the case touches the table correct?