Author Topic: [SPRiT] R1 R2 (Shipping 92% Completed) (Read 1783961 times)

bladegesnow · « **Reply #1100 on:** Thu, 19 December 2013, 14:35:50 »

Hello Sprit,
I receive 4 invoices and I have paid 1252 and 1305 as final orders. I think the other two invoices, 1031 and 1227, are from my previous orders. But I am still receiving reminders that ask me to pay 1031 and 1227. Can you do something with that?

)

Thank you!

acidtrip69 · « **Reply #1101 on:** Thu, 19 December 2013, 16:44:01 »

Quote from: bladegesnow on Thu, 19 December 2013, 14:35:50

Hello Sprit,
I receive 4 invoices and I have paid 1252 and 1305 as final orders. I think the other two invoices, 1031 and 1227, are from my previous orders. But I am still receiving reminders that ask me to pay 1031 and 1227. Can you do something with that? )

Thank you!

Holy Cow ! How many keyboards did you ask for him to make you ?

akikun · « **Reply #1102 on:** Thu, 19 December 2013, 18:46:13 »

Quote from: sprit on Wed, 18 December 2013, 00:03:00

Quote from: bueller on Tue, 17 December 2013, 21:28:15
Just sent you a PM regarding time frames for shipping the PCB's sprit. I asked earlier in the thread but it's been so busy in here you probably missed it

I PMed !

The Payments are too Slow, I need to Pay the Factories for finalizing.

I might need ReIssue Old Invoices Again !

Paypal Stop was more than 2 Weeks,.... I am having a Hard Time for the Schedule...

Reissuing the invoices doesn't sound like a bad idea... although I did get a reminder email from PayPal at about the same time things seemed to get sorted out...hopefully people will respond to those? Anyway, I just paid #1033.

Thanks for all your hard work, Sprit. Can't wait to see these PCBs!

sprit · « **Reply #1103 on:** Thu, 19 December 2013, 18:55:07 »

Quote from: bladegesnow on Thu, 19 December 2013, 14:35:50

Hello Sprit,
I receive 4 invoices and I have paid 1252 and 1305 as final orders. I think the other two invoices, 1031 and 1227, are from my previous orders. But I am still receiving reminders that ask me to pay 1031 and 1227. Can you do something with that? )

Thank you!

Hello! bladegesnow! How are You? Its getting too cold here.

I cleared old ones, Sorry!! I got 1252 and 1305 !
Good day!

HPE1000 · « **Reply #1104 on:** Thu, 19 December 2013, 18:55:38 »

Forgive me if I am missing something but what would be the point of reissuing old invoices?

sprit · « **Reply #1105 on:** Thu, 19 December 2013, 19:05:13 »

I am sorting Out the Old Invoices, some Paid, some not responding,

I will Issue New Invoices Today to complete The Batch #1 for GB.

THiS GB comes to the Last Stage.
I need to show the Metal Cases and finalize all the Productions.

The Productions need to be Paid All, and will need to go the Finalizing
(PCB Inspection, coloring, soldering, Acryl case Inspections, Tapping, finishing, Plates Inspection.s..etc

justnits · « **Reply #1106 on:** Thu, 19 December 2013, 19:25:12 »

awww yesss...any estimate date of when you can start shipping pcb and acrylic cases out?

Latin00032 · « **Reply #1107 on:** Thu, 19 December 2013, 19:29:47 »

Quote from: sprit on Thu, 19 December 2013, 19:05:13

I am sorting Out the Old Invoices, some Paid, some not responding,

I will Issue New Invoices Today to complete The Batch #1 for GB.

THiS GB comes to the Last Stage.
I need to show the Metal Cases and finalize all the Productions.

The Productions need to be Paid All, and will need to go the Finalizing
(PCB Inspection, coloring, soldering, Acryl case Inspections, Tapping, finishing, Plates Inspection.s..etc

Metal cases! Yes!

sprit · « **Reply #1108 on:** Thu, 19 December 2013, 19:34:15 »

I need to Pay all the costs to the Factories, and Mid-stage Inspections, and go to the Fianlizing.

(PCB Inspection, coloring, soldering, Acryl case Inspections, Tapping, finishing, Plates Inspection.s..etc)

So The Schedule is Not Clear Yet. Because the Factories have their own Schedules, and It is busy Time.

Too much Time wasted for the Paypal ReSetup.

Hopely, Start shpping after Xmas !

sprit · « **Reply #1109 on:** Thu, 19 December 2013, 20:13:37 »

I Will Post All the Production Schedule Soon! Good Day!

sprit · « **Reply #1110 on:** Thu, 19 December 2013, 20:50:46 »

Firmware Updates for Model 1 PCBs http://winkeyless.kr/17

V1.5 1218 For Win & Mac OS : patched for the safe mode Booting bug for Mac OS http://winkeyless.kr/108

V1.5 1213 For Win & Mac OS : patched for the CMOS comaptibility http://winkeyless.kr/17

Melanic · « **Reply #1111 on:** Thu, 19 December 2013, 21:16:11 »

Quote from: sprit on Thu, 19 December 2013, 20:50:46

Firmware Updates for Model 1 PCBs http://winkeyless.kr/17

V1.5 1218 For Win & Mac OS : patched for the safe mode Booting bug for Mac OS http://winkeyless.kr/108

V1.5 1213 For Win & Mac OS : patched for the CMOS comaptibility http://winkeyless.kr/17

Just wondering. Is there any LED indicator for caps lock on a 60% keyboard built in to the firmware?

I ran the firmware information though Google translator but it wasn't too clear.

Otherwise is there a way to tweak the firmware?

sprit · « **Reply #1112 on:** Thu, 19 December 2013, 22:06:48 »

Quote from: Melanic on Thu, 19 December 2013, 21:16:11

Quote from: sprit on Thu, 19 December 2013, 20:50:46

Firmware Updates for Model 1 PCBs http://winkeyless.kr/17

V1.5 1218 For Win & Mac OS : patched for the safe mode Booting bug for Mac OS http://winkeyless.kr/108

V1.5 1213 For Win & Mac OS : patched for the CMOS comaptibility http://winkeyless.kr/17

Just wondering. Is there any LED indicator for caps lock on a 60% keyboard built in to the firmware?

I ran the firmware information though Google translator but it wasn't too clear.

Otherwise is there a way to tweak the firmware?

Basic Functions like LED indicator for caps lock, Esc, ScrLock, NumLock etc.. are Always Possible since last year !

swill · « **Reply #1113 on:** Thu, 19 December 2013, 22:12:19 »

Sprit, I am working on my own case design. I am wondering if you can give me the exact length and width of both the 60% and 75% PCBs. Down the the fraction of a mm would be ideal. For example, here are the dimensions of the GH60. Thanks...

sprit · « **Reply #1114 on:** Thu, 19 December 2013, 22:17:11 »

Quote from: swill on Thu, 19 December 2013, 22:12:19

Sprit, I am working on my own case design. I am wondering if you can give me the exact length and width of both the 60% and 75% PCBs. Down the the fraction of a mm would be ideal. For example, here are the dimensions of the GH60. Thanks...

Wow! Good job! I will PM to You!

Melanic · « **Reply #1115 on:** Thu, 19 December 2013, 23:02:57 »

Quote from: sprit on Thu, 19 December 2013, 22:06:48

Basic Functions like LED indicator for caps lock, Esc, ScrLock, NumLock etc.. are Always Possible since last year !

Oh, nice. Is there some user manual I can look at to see how to configure these features?

SigLogical · « **Reply #1116 on:** Fri, 20 December 2013, 01:42:59 »

Invoice 1362 paid

Sorry it took two days later to pay up

cookiesowns · « **Reply #1117 on:** Fri, 20 December 2013, 04:15:03 »

Quote from: sprit on Thu, 19 December 2013, 19:34:15

I need to Pay all the costs to the Factories, and Mid-stage Inspections, and go to the Fianlizing.

(PCB Inspection, coloring, soldering, Acryl case Inspections, Tapping, finishing, Plates Inspection.s..etc)

So The Schedule is Not Clear Yet. Because the Factories have their own Schedules, and It is busy Time.

Too much Time wasted for the Paypal ReSetup.

Hopely, Start shpping after Xmas !

Sprit,

Just checking in to make sure you got my PM the other day. Really want the new invoices sent ASAP, so I can get you paid, so we can continue with production =)

sprit · « **Reply #1118 on:** Fri, 20 December 2013, 05:22:07 »

Quote from: cookiesowns on Fri, 20 December 2013, 04:15:03

..

Sprit,

Just checking in to make sure you got my PM the other day. Really want the new invoices sent ASAP, so I can get you paid, so we can continue with production =)

OK, New Invoice in 5 min!

cookiesowns · « **Reply #1119 on:** Fri, 20 December 2013, 18:22:02 »

Quote from: sprit on Fri, 20 December 2013, 05:22:07

Quote from: cookiesowns on Fri, 20 December 2013, 04:15:03
..

Sprit,

Just checking in to make sure you got my PM the other day. Really want the new invoices sent ASAP, so I can get you paid, so we can continue with production =)

OK, New Invoice in 5 min!

Paid, sent you a PM too!

sprit · « **Reply #1120 on:** Fri, 20 December 2013, 22:16:09 »

Quote from: cookiesowns on Fri, 20 December 2013, 18:22:02

Quote from: sprit on Fri, 20 December 2013, 05:22:07
OK, New Invoice in 5 min!

Paid, sent you a PM too!

I answered!

cookiesowns

sprit · « **Reply #1121 on:** Fri, 20 December 2013, 23:26:08 »

Quote from: Melanic on Thu, 19 December 2013, 23:02:57

Quote from: sprit on Thu, 19 December 2013, 22:06:48
Basic Functions like LED indicator for caps lock, Esc, ScrLock, NumLock etc.. are Always Possible since last year !
Oh, nice. Is there some user manual I can look at to see how to configure these features?

I will prepare Soon!

naokira · « **Reply #1122 on:** Fri, 20 December 2013, 23:37:24 »

Spirit, just to confirm, are we waiting for all the invoice to be paid before moving to production? Or is it already in production?

sprit · « **Reply #1123 on:** Fri, 20 December 2013, 23:59:48 »

Quote from: naokira on Fri, 20 December 2013, 23:37:24

Spirit, just to confirm, are we waiting for all the invoice to be paid before moving to production? Or is it already in production?

Hello! naokira! How are You?

The Schedule !

1. Started Productions 2 weeks ago. = I paid the Half of All the Costs 2weeks ago.
2. Paypal ResetUp done 1 week ago. = Payments Restarted.
3. Productions need to go to Mid-Inspections, Final machining. = Still Some Payments Not come Yet. (Around 30%) Dec.20th
4. For the Schedule, For the MOQ, I'm going to Pay All the Costs on 23th Monday, and I will get the Products After Xmas(26th~28th)
5. The Packping process will start 28th.
6. The Shipping will Start from 30th, I Wish that !

Thanks Guys! For the Passion and Love for Happy Typing !

YongJK · « **Reply #1124 on:** Sat, 21 December 2013, 00:25:09 »

Sprit Brother,

Metal case photo ?

naokira · « **Reply #1125 on:** Sat, 21 December 2013, 00:30:49 »

Quote from: sprit on Fri, 20 December 2013, 23:59:48

Quote from: naokira on Fri, 20 December 2013, 23:37:24
Spirit, just to confirm, are we waiting for all the invoice to be paid before moving to production? Or is it already in production?

Hello! naokira! How are You?

The Schedule !

1. Started Productions 2 weeks ago. = I paid the Half of All the Costs 2weeks ago.
2. Paypal ResetUp done 1 week ago. = Payments Restarted.
3. Productions need to go to Mid-Inspections, Final machining. = Still Some Payments Not come Yet. (Around 30%) Dec.20th
4. For the Schedule, For the MOQ, I'm going to Pay All the Costs on 23th Monday, and I will get the Products After Xmas(26th~28th)
5. The Packping process will start 28th.
6. The Shipping will Start from 30th, I Wish that !

Thanks Guys! For the Passion and Love for Happy Typing !

(Attachment Link)

Nice! Thanks Spirit

Hope it will be shipped by 30th

justnits · « **Reply #1126 on:** Sat, 21 December 2013, 03:40:46 »

hopefully you can get the stabilizers sourced before shipping

IMHB · « **Reply #1127 on:** Sat, 21 December 2013, 15:24:54 »

Hey Sprit,

Paid invoice #1367 & 1368!

Now everything's paid, thanks Sprit!

sprit · « **Reply #1128 on:** Sun, 22 December 2013, 04:33:41 »

Quote from: IMHB on Sat, 21 December 2013, 15:24:54

Hey Sprit,

Paid invoice #1367 & 1368!

Now everything's paid, thanks Sprit!

I got Yours! Merry XMass

sprit · « **Reply #1129 on:** Sun, 22 December 2013, 04:34:26 »

Quote from: justnits on Sat, 21 December 2013, 03:40:46

hopefully you can get the stabilizers sourced before shipping

Yes I am waiting for the answer!

sprit · « **Reply #1130 on:** Sun, 22 December 2013, 04:35:57 »

Quote from: naokira on Sat, 21 December 2013, 00:30:49

Nice! Thanks Spirit
Hope it will be shipped by 30th

Thanks! naokira

The Shipping starts FROM 30th

I wish!

cookiesowns · « **Reply #1131 on:** Sun, 22 December 2013, 04:38:24 »

Quote from: sprit on Sun, 22 December 2013, 04:34:26

Quote from: justnits on Sat, 21 December 2013, 03:40:46
hopefully you can get the stabilizers sourced before shipping

Yes I am waiting for the answer!

Also waiting for your answer regarding plates =)

I'm going to sleep now, so if you can give me your recommendation based on my current order, as well as the available options, I'll send in my final adjustment once I'm up later today =)

sprit · « **Reply #1132 on:** Sun, 22 December 2013, 04:47:24 »

Quote from: cookiesowns on Sun, 22 December 2013, 04:38:24

... can give me your recommendation based on my current order, as well as the available options, I'll send in my final adjustment once I'm up later today =)

As You ordered White PCBs, and Forsty Cases, I'd prefer Clear Plates!

Clear on White looks fantastic! even with the White PCBs and LEDs !

HPE1000 · « **Reply #1133 on:** Sun, 22 December 2013, 12:55:52 »

I want to see a metal case photo for the 60% layout, I am stuck between yours and another persons case but since I have not seen yours I can't be sure which I want!

Magna224 · « **Reply #1134 on:** Sun, 22 December 2013, 16:53:21 »

What does the frost color look like?

MKULTRA · « **Reply #1135 on:** Sun, 22 December 2013, 16:59:23 »

Sprit I got an invoice, is it possible to change my order still??

sprit · « **Reply #1136 on:** Sun, 22 December 2013, 19:46:16 »

Quote from: MKULTRA on Sun, 22 December 2013, 16:59:23

Sprit I got an invoice, is it possible to change my order still??

Hi ! MKULTRA !

If a minor change, send me PM plz!

if a Major big change, send me a New Order Form plz !

sprit · « **Reply #1137 on:** Sun, 22 December 2013, 19:49:22 »

Quote from: Magna224 on Sun, 22 December 2013, 16:53:21

What does the frost color look like?

Hello! Magna224

Frost = Ice Frost = Icy half smooth = Clear, mattie cut finish = Clear with Non-transparent cut surface, As I define

sprit · « **Reply #1138 on:** Sun, 22 December 2013, 19:53:28 »

Quote from: HPE1000 on Sun, 22 December 2013, 12:55:52

I want to see a metal case photo for the 60% layout, I am stuck between yours and another persons case but since I have not seen yours I can't be sure which I want!

Hello HPE1000 !

My Metal cases are crappy. I always change details. Blame my habit! Sorry for the Delay!

I would recommend the others'.

roadblock2thesun · « **Reply #1139 on:** Sun, 22 December 2013, 22:37:34 »

Sprit, Any chance you can remind me what case stuff I ordered? I know I ordered an 87 key, but I don't remember what colors I chose. I think I want to order another for the next round of production, but am not sure what I already have coming...

sprit · « **Reply #1140 on:** Sun, 22 December 2013, 23:34:10 »

Quote from: roadblock2thesun on Sun, 22 December 2013, 22:37:34

Sprit, Any chance you can remind me what case stuff I ordered? I know I ordered an 87 key, but I don't remember what colors I chose. I think I want to order another for the next round of production, but am not sure what I already have coming...

Hi! C.K !

#1266 Black - Black - Black All Black Layers

cookiesowns · « **Reply #1141 on:** Mon, 23 December 2013, 02:00:11 »

Quote from: sprit on Sun, 22 December 2013, 19:46:16

Quote from: MKULTRA on Sun, 22 December 2013, 16:59:23
Sprit I got an invoice, is it possible to change my order still??
Hi ! MKULTRA !
If a minor change, send me PM plz!
if a Major big change, send me a New Order Form plz !

Hi Sprit,

Just confirming that you got my last 2 PM's from yesterday!

sprit · « **Reply #1142 on:** Mon, 23 December 2013, 05:39:34 »

Quote from: cookiesowns on Mon, 23 December 2013, 02:00:11

Hi Sprit,

Just confirming that you got my last 2 PM's from yesterday!

Answered!

sprit · « **Reply #1143 on:** Mon, 23 December 2013, 05:40:56 »

Quote from: roadblock2thesun on Sun, 22 December 2013, 22:37:34

Sprit, Any chance you can remind me what case stuff I ordered? I know I ordered an 87 key, but I don't remember what colors I chose. I think I want to order another for the next round of production, but am not sure what I already have coming...

Answered !

Signature · « **Reply #1144 on:** Mon, 23 December 2013, 10:37:35 »

Quote from: sprit on Sun, 22 December 2013, 19:53:28

Quote from: HPE1000 on Sun, 22 December 2013, 12:55:52
I want to see a metal case photo for the 60% layout, I am stuck between yours and another persons case but since I have not seen yours I can't be sure which I want!
Hello HPE1000 !

My Metal cases are crappy. I always change details. Blame my habit! Sorry for the Delay!

I would recommend the others'.

Just take the one you posted that was named Cope break!

pix3l_fodder · « **Reply #1145 on:** Mon, 23 December 2013, 15:18:04 »

Gutted I missed this! I had no idea 60% ISO full LED PCB was available

Been waiting for GH60 for an age. Anyone know if someone is putting these on sale or willing to let go of one for asking price?

nuclearsandwich · « **Reply #1146 on:** Mon, 23 December 2013, 15:22:46 »

Quote from: pix3l_fodder on Mon, 23 December 2013, 15:18:04

Gutted I missed this! I had no idea 60% ISO full LED PCB was available Been waiting for GH60 for an age. Anyone know if someone is putting these on sale or willing to let go of one for asking price?

There's semi-continuous production as things meet and re-meet MOQ. There's a PCB order form in the OP. Let your dreams soar.

pix3l_fodder · « **Reply #1147 on:** Mon, 23 December 2013, 17:45:26 »

Oh excellent, ill have to check what the cost comes to!

Does anyone know how close we are to the next run?

sprit · « **Reply #1148 on:** Mon, 23 December 2013, 17:50:16 »

Quote from: pix3l_fodder on Mon, 23 December 2013, 15:18:04

Gutted I missed this! I had no idea 60% ISO full LED PCB was available Been waiting for GH60 for an age. Anyone know if someone is putting these on sale or willing to let go of one for asking price?

Quote from: nuclearsandwich on Mon, 23 December 2013, 15:22:46

There's semi-continuous production as things meet and re-meet MOQ. There's a PCB order form in the OP. Let your dreams soar.

Mr. nuclearsandwich is 100% Right!

You can send the Order Form! I have several 60% ANSI + ISO PCBs

I should show Metal Cases for this Round 1 GB, so I prepared Extra PCBs.
The PCBs are Key parts and PCBs will be availableand supported for a Long long Time!

sprit · « **Reply #1149 on:** Mon, 23 December 2013, 18:05:26 »

Quote from: Signature on Mon, 23 December 2013, 10:37:35

Just take the one you posted that was named Cope break!

Cope = Cofe = Coffee Break Case is a good One, Made by the Young Ambitious Members in KBDmaina in Korea.

They have set a New Standard for the Price and Quality around 300 USD.

Just ~ 40 sets made for the KBDmania members only.

News:

Author Topic: [SPRiT] R1 R2 (Shipping 92% Completed) (Read 1783961 times)