[SPRiT] R1 R2 (Shipping 92% Completed)

[YongJK]

/When metal when?

[sprit]

For the Reference

SPRIT  Model 1  PolyAcryl Colors  :   Red,  Black,  SkyBlue,  Green,  Yellow,  Orange,  Black,  DarkBlue
 
 

[cookiesowns]

For the Reference

SPRIT  Model 1  PolyAcryl Colors  :   Red,  Black,  SkyBlue,  Green,  Yellow,  Orange,  Black,  DarkBlue

(Attachment Link)

Those are way to transparent for my taste! Happy I just went with Clear & Frosty. However sky blue is growing on me!

[lotus1109]

I wonder am I the only one who still die waiting for the invoice?
lesson learnt: shouldn't edit too much

[justnits]

sprit, was my acrylic case colour blue - frost - blue?
i hope it's darkblue..

[cookiesowns]

I wonder am I the only one who still die waiting for the invoice?
lesson learnt: shouldn't edit too much

Yeah... I finally settled on a config. Try PMing sprit with the link to your docs, he should be able to get an invoice sent to you!

[sprit]

I wonder am I the only one who still die waiting for the invoice?
lesson learnt: shouldn't edit too much

It's OK!  Lotus!   

It took me more time to check different Orders and PMs,  You send me the good last one!
Invoice sent!   

[xandr]

Hey Sprit,

I can't remember if I ordered stabilizers with my PCB and plate or if I forgot them - can you check for me? Also, if I really forgot to add them, can I still extend my order?

Cheers

[cookiesowns]

I wonder am I the only one who still die waiting for the invoice?
lesson learnt: shouldn't edit too much

It's OK!  Lotus!   

It took me more time to check different Orders and PMs,  You send me the good last one!
Invoice sent!   

Sent you PM about Stabilizers sprit, didn't see that they are here! Whoops, just invoice me for 10 sets of stabilzers. Are these stabilizers properly spaced for numpad stabilizer as well?

[justnits]

sprit, i just saw the stabilizers option open in the order form.
i hope those are plate mount stabilizers?
i've sent you the order, hopefully this can be included in my pcb and case order.

[HPE1000]

Yeah sprit, what do I do? I think I am going to have to update and modify my invoice, do I just send you a new one and you cancel the old one?

Also, is 1 set of stabilizers enough to build the keyboard?

Also, I see you found 120g springs, I think I am going to need to order a pack of those 

[swill]

I didn't realize stabilizers had been added.

Sprit if I want to add stabilizers I should probably just create a new order just for them because I have already paid for my other invoices...

Also, this is what the option says:
"Cherry MX Stabilizers 5pcs (with 1 metal space bar) = 8 USD *"

Sorry for the noob question, but how many 'pcs' do I need for a 60% AND 75% keyboard?

[Signature]

I didn't realize stabilizers had been added.

Sprit if I want to add stabilizers I should probably just create a new order just for them because I have already paid for my other invoices...

Also, this is what the option says:
"Cherry MX Stabilizers 5pcs (with 1 metal space bar) = 8 USD *"

Sorry for the noob question, but how many 'pcs' do I need for a 60% AND 75% keyboard?

I guess you need to order 2 packs, 10 pcs!

[swill]

I didn't realize stabilizers had been added.

Sprit if I want to add stabilizers I should probably just create a new order just for them because I have already paid for my other invoices...

Also, this is what the option says:
"Cherry MX Stabilizers 5pcs (with 1 metal space bar) = 8 USD *"

Sorry for the noob question, but how many 'pcs' do I need for a 60% AND 75% keyboard?

I guess you need to order 2 packs, 10 pcs!

So 5pcs will do an entire board?  I am new to cherry stabs...

[Signature]

I didn't realize stabilizers had been added.

Sprit if I want to add stabilizers I should probably just create a new order just for them because I have already paid for my other invoices...

Also, this is what the option says:
"Cherry MX Stabilizers 5pcs (with 1 metal space bar) = 8 USD *"

Sorry for the noob question, but how many 'pcs' do I need for a 60% AND 75% keyboard?

I guess you need to order 2 packs, 10 pcs!

So 5pcs will do an entire board?  I am new to cherry stabs...

Yup 2 for shift 1 for enter 1 for spacebar and one for backspace!

[swill]

I didn't realize stabilizers had been added.

Sprit if I want to add stabilizers I should probably just create a new order just for them because I have already paid for my other invoices...

Also, this is what the option says:
"Cherry MX Stabilizers 5pcs (with 1 metal space bar) = 8 USD *"

Sorry for the noob question, but how many 'pcs' do I need for a 60% AND 75% keyboard?

I guess you need to order 2 packs, 10 pcs!

So 5pcs will do an entire board?  I am new to cherry stabs...

Yup 2 for shift 1 for enter 1 for spacebar and one for backspace!

so '1pcs' refers to 'everything needed for a single switch'.  so that would basically have two sides and a bar between them.  ok, makes sense now...

[sprit]

Hello!  Guys!   Good Morning!         I hope I made it more Clear!   

Cherry MX Stabilizers 5pcs for 87% (with 1 metal space part),   7pcs for 110%

(All are Cherry Original Type)

* Winleyless (WKL) users need comment for the 7x metal space part.


You Need to Send a New Form for this  (for the SpreadSheet Job Easy and Clear!, Sorry for this Guys!) 

I will ship this with all Your Orders, Sure!

[HPE1000]

Hello!  Guys!   Good Morning!   

I hope I made it more Clear!   

Cherry MX Stabilizers 5pcs for 87% (with 1 metal space part),   7pcs for 110% *

(All are Cherry Original Type)

* Winleyless (WKL) users need comment for the 7x metal space part.

Sounds good,so I just need to resubmit my order and you will straighten it out? I am going to add those 120g springs for sure!

[cookiesowns]

Hello!  Guys!   Good Morning!   

I hope I made it more Clear!   

Cherry MX Stabilizers 5pcs for 87% (with 1 metal space part),   7pcs for 110% *

(All are Cherry Original Type)

* Winleyless (WKL) users need comment for the 7x metal space part.

Sounds good,so I just need to resubmit my order and you will straighten it out? I am going to add those 120g springs for sure!

I think if you are invoiced and paid already, all you need to do is submit an order for what else you want added. Then you should be all set from there. Sprit, if this is wrong, correct me, as this is what I just did!

[HPE1000]

Hello!  Guys!   Good Morning!   

I hope I made it more Clear!   

Cherry MX Stabilizers 5pcs for 87% (with 1 metal space part),   7pcs for 110% *

(All are Cherry Original Type)

* Winleyless (WKL) users need comment for the 7x metal space part.

Sounds good,so I just need to resubmit my order and you will straighten it out? I am going to add those 120g springs for sure!

I think if you are invoiced and paid already, all you need to do is submit an order for what else you want added. Then you should be all set from there. Sprit, if this is wrong, correct me, as this is what I just did!

Yeah, that might be what I need to do, I will wait to see what he says though

[Pacifist]

He's selling stabs and spring?

[cookiesowns]

Hello!  Guys!   Good Morning!   

I hope I made it more Clear!   

Cherry MX Stabilizers 5pcs for 87% (with 1 metal space part),   7pcs for 110% *

(All are Cherry Original Type)

* Winleyless (WKL) users need comment for the 7x metal space part.

Sounds good,so I just need to resubmit my order and you will straighten it out? I am going to add those 120g springs for sure!

I think if you are invoiced and paid already, all you need to do is submit an order for what else you want added. Then you should be all set from there. Sprit, if this is wrong, correct me, as this is what I just did!

Yeah, that might be what I need to do, I will wait to see what he says though

Meh. I just submitted the order for 120G springs, and 6 sets of stabs !

He's selling stabs and spring?

Yup. Unsure if they are plate or pcb mounted yet though..
Anyone know where that post sprit made regarding which pcb + plate combos requires what?

[justnits]

Hello!  Guys!   Good Morning!   

I hope I made it more Clear!   

Cherry MX Stabilizers 5pcs for 87% (with 1 metal space part),   7pcs for 110% *

(All are Cherry Original Type)

* Winleyless (WKL) users need comment for the 7x metal space part.

Sounds good,so I just need to resubmit my order and you will straighten it out? I am going to add those 120g springs for sure!

I think if you are invoiced and paid already, all you need to do is submit an order for what else you want added. Then you should be all set from there. Sprit, if this is wrong, correct me, as this is what I just did!

Yeah, that might be what I need to do, I will wait to see what he says though

Meh. I just submitted the order for 120G springs, and 6 sets of stabs !

He's selling stabs and spring?

Yup. Unsure if they are plate or pcb mounted yet though..
Anyone know where that post sprit made regarding which pcb + plate combos requires what?

Does anyone know what kind of stabilizers this will use? Are they PCB Mount? Thanks!

Hello!     

All PCB support PCB/Plate Mount! 

Metal Plates support Plate Mount Only,  PolyAcryl support PCB mount Only!   

(for the Materials and CNC Machining Reasons)

here u go

[Pacifist]

Where is the link for the stabs?

[justnits]

Where is the link for the stabs?

first page, on his PCB order form.

[jorgenslee]

Where is the link for the stabs?

In the OP, I think it was the original form for PCB. The one I used to order is not open anymore.

[sprit]

Where is the link for the stabs?

In the OP, I think it was the original form for PCB. The one I used to order is not open anymore.

The Previous Order form Closed!   Only New Form is valid from now on.      

(for the Spreadsheet Job clear and Simple)   

[justnits]

Where is the link for the stabs?

In the OP, I think it was the original form for PCB. The one I used to order is not open anymore.

The Previous Order form Closed!   Only New Form is valid from now on.      

(for the Spreadsheet Job clear and Simple)   

sprit, did u receive my order for 2 set of plate mount stabilizers?

[sprit]

Hello!     

All PCB support PCB/Plate Mount! 

Metal Plates support Plate Mount Only,  PolyAcryl support PCB mount Only!   

(for the Materials and CNC Machining Reasons)

here u go


Thanks! Justnits!    
You are 100% Right!   

Anyway I was going to ask in Shipping Invoice on Stabilzers and Other things (if, any).
So, Don't Worry!  My Fellow GH'ers!     

[HPE1000]

Hello!     

All PCB support PCB/Plate Mount! 

Metal Plates support Plate Mount Only,  PolyAcryl support PCB mount Only!   

(for the Materials and CNC Machining Reasons)

here u go


Thanks! Justnits!    
You are 100% Right!   

Anyway I was going to ask in Shipping Invoice on Stabilzer and Other things.
So, Don't Worry!  My Fellow GH'ers!     

That sounds good, so could I add springs into that shipping invoice with the stabilizers as well?

[sprit]

Hello!     

All PCB support PCB/Plate Mount! 

Metal Plates support Plate Mount Only,  PolyAcryl support PCB mount Only!   

(for the Materials and CNC Machining Reasons)

here u go


Thanks! Justnits!    
You are 100% Right!   

Anyway I was going to ask in Shipping Invoice on Stabilzer and Other things.
So, Don't Worry!  My Fellow GH'ers!     

That sounds good, so could I add springs into that shipping invoice with the stabilizers as well?

Yes!  HPE1000 !      

As You told, That's why I opened Order Form Yet. 

The Spring will be Gold Plated!

[cookiesowns]

Hello!     

All PCB support PCB/Plate Mount! 

Metal Plates support Plate Mount Only,  PolyAcryl support PCB mount Only!   

(for the Materials and CNC Machining Reasons)

here u go


Thanks! Justnits!    
You are 100% Right!   

Anyway I was going to ask in Shipping Invoice on Stabilzer and Other things.
So, Don't Worry!  My Fellow GH'ers!     

That sounds good, so could I add springs into that shipping invoice with the stabilizers as well?

Yes!  HPE1000 !      

As You told, That's why I opened Order Form Yet. 

The Spring will be Gold Plated!

Yay! Gold plated springs, awesome! Ordered one of each. What happened to 68G spring? Will springs from old form still be gold plated?

I've submitted new form to specify what type of stabs I want.

Ordered some extras too.. $1.50 per stab is a bit steep however

[Pacifist]

i placed an order

can you just sell me 5 2X PCB cherry stabs instead of the 110% set?

Also can you sell 30 55g, 30 60g, 30 65g, and 30 120g instead of 120 xg?

[keymaster]

Edit: Was I supposed to specify in my cherry stabs order whether I needed PCB or plate mount? I ordered the clear acrylic plate.

[swill]

If I order more springs and stabs, they will be shipped with my original order.  Yes???

[cookiesowns]

Wait, the clear acrylic plate is only compatible with PCB-mount switches only?

Stabs!

PCBmount and plate mount switches are basically the same. But if you're building into sprit's PCB, just get PCB mount switches. If you ever need to mount pcb switches onto plate mount boards only, just snip the extra 2 small legs

[swill]

Ordered some extras too.. $1.50 per stab is a bit steep however

This is actually cheaper than other places I have seen.  IMSTO is selling 5 for $10 (so $2/piece).

[swill]

Yay! Gold plated springs, awesome! Ordered one of each. What happened to 68G spring? Will springs from old form still be gold plated?

I am also wondering what happened to the 68g springs.  I already have some on order, but it is strange that they are not available anymore...

[cookiesowns]

Ordered some extras too.. $1.50 per stab is a bit steep however

This is actually cheaper than other places I have seen.  IMSTO is selling 5 for $10 (so $2/piece).

Yeah... I took a look at WASD costar prices, and they are slightly more expensive too, and we know costar stabs are meh.

[lilky]

Hey guys, newbie here, can you answer some questions for me?

1. If you order a case and PCB, what do you have to do to mount switches? Do you need to solder them on?
2. Where is sprit selling springs? Everyone in the thread keeps talking about buying springs and stabs but I don't see where they're buying from.

Thanks!

[swill]

Hey guys, newbie here, can you answer some questions for me?

1. If you order a case and PCB, what do you have to do to mount switches? Do you need to solder them on?
2. Where is sprit selling springs? Everyone in the thread keeps talking about buying springs and stabs but I don't see where they're buying from.

Thanks!

1. Yes, you need to solder them on.
2. In the PCB order form on in the OP (original post), you will find the springs and stabs are now there...

[jorgenslee]

Hey guys, newbie here, can you answer some questions for me?

1. If you order a case and PCB, what do you have to do to mount switches? Do you need to solder them on?
2. Where is sprit selling springs? Everyone in the thread keeps talking about buying springs and stabs but I don't see where they're buying from.

Thanks!

1. You have to solder it manually or have someone do it for you. You also need stabilizers, keycaps and usb cable. Metal plate is optional but you can add it if you want.
2. It is in the OP, there is a link pointed to the Order Form for PCB.

[sprit]

Yay! Gold plated springs, awesome! Ordered one of each. What happened to 68G spring? Will springs from old form still be gold plated?

I am also wondering what happened to the 68g springs.  I already have some on order, but it is strange that they are not available anymore...

The previous 68g Springs are under production, If People want 68g  I can re-order in Gold Edition.

[swill]

Yay! Gold plated springs, awesome! Ordered one of each. What happened to 68G spring? Will springs from old form still be gold plated?

I am also wondering what happened to the 68g springs.  I already have some on order, but it is strange that they are not available anymore...

The previous 68g Springs are under production, If People want 68g  I can re-order in Gold Edition.

Oh ok.  So the previous springs were not the gold version?  Ok...

Will my new order of springs and stabs be shipped with my original order?  Thx...

[nubbinator]

Oh, I'd probably add some gold 68g springs to my order just for the fun of it.

[HPE1000]

Oh, I'd probably add some gold 68g springs to my order just for the fun of it.

Imma get 120g gold and 65g gold even though I am not using either, but swag.

[Zeal]

Are all the springs going to be gold plated, including the first order? o_o

[cookiesowns]

Yay! Gold plated springs, awesome! Ordered one of each. What happened to 68G spring? Will springs from old form still be gold plated?

I am also wondering what happened to the 68g springs.  I already have some on order, but it is strange that they are not available anymore...

The previous 68g Springs are under production, If People want 68g  I can re-order in Gold Edition.

Oh ok.  So the previous springs were not the gold version?  Ok...

Will my new order of springs and stabs be shipped with my original order?  Thx...

I want to know as well!

[sprit]

Are all the springs going to be gold plated, including the first order? o_o

Yes!      for the MOQ,  the first Order will be Gold plated too. (No Extra charge)

The Gold Spring will show soon !

[bubchi89]

If I order more springs and stabs, they will be shipped with my original order.  Yes???

Just reiterating for those who haven't submitted another order due to new options on the new order form, sprit mentioned in another post that he was planning on just asking about stabs ("and other stuff") on the shipping invoice. I would just wait for that if you need stabs. In your case since you already submitted another order it's a bit more confusing; on the other hand, I'm not really sure how he has been keeping track of the 10 million order submissions some people have been submitting so maybe cancelling an order/combining orders would just be another drop in the bucket