Author Topic: [SPRiT] R1 R2 (Shipping 92% Completed) (Read 1783968 times)

sprit · « **Reply #1500 on:** Sat, 18 January 2014, 01:57:58 »

All the Shipping Invoices will sent by Sunday Evening!

cookiesowns · « **Reply #1501 on:** Sat, 18 January 2014, 02:36:13 »

Quote from: sprit on Sat, 18 January 2014, 01:57:58

All the Shipping Invoices will sent by Sunday Evening!

Sprit, so will my PCB's have diodes pre-soldered or no. Think you can still make end of January deadline if I ask you to solder them? ( I pre-ordered quite a while ago, back when 1st batch deadline ended as you know! )

Again thank you for the hardwork.

Invoice paid for stabs + shipping as well!

fuus · « **Reply #1502 on:** Sat, 18 January 2014, 03:19:44 »

Sprit, your dedication is amazing

pasph · « **Reply #1503 on:** Sat, 18 January 2014, 03:35:10 »

My poor eyes don't allow me to do that kind of work and i've asked you more that 1 time if all will come presoldered.
So please answer clearly if my stuff will come all presoldered.
If not i'm ok even to pay a fee for having all assembled but please don't ship something i can't use.
If i have to buy also switches i'll do that.

sprit · « **Reply #1504 on:** Sat, 18 January 2014, 03:40:35 »

Quote from: pasph on Sat, 18 January 2014, 03:35:10

My poor eyes don't allow me to do that kind of work and i've asked you more that 1 time if all will come presoldered.
So please answer clearly if my stuff will come all presoldered.
If not i'm ok even to pay a fee for having all assembled but please don't ship something i can't use.
If i have to buy also switches i'll do that.

I will Solder all and Test for You !

pasph · « **Reply #1505 on:** Sat, 18 January 2014, 03:42:40 »

Quote from: sprit on Sat, 18 January 2014, 03:40:35

Quote from: pasph on Sat, 18 January 2014, 03:35:10
My poor eyes don't allow me to do that kind of work and i've asked you more that 1 time if all will come presoldered.
So please answer clearly if my stuff will come all presoldered.
If not i'm ok even to pay a fee for having all assembled but please don't ship something i can't use.
If i have to buy also switches i'll do that.

I will Solder all and Test for You !

Thank you so much !

bakteria · « **Reply #1506 on:** Sat, 18 January 2014, 03:43:35 »

Spirit you has PM

Jokrik · « **Reply #1507 on:** Sat, 18 January 2014, 03:57:14 »

Invoice paid

thx for your hard work and keep the spirit up , spirit

sprit · « **Reply #1508 on:** Sat, 18 January 2014, 04:21:20 »

Quote from: bakteria on Sat, 18 January 2014, 03:43:35

Spirit you has PM

I sent the Newly added Invoice !

sprit · « **Reply #1509 on:** Sat, 18 January 2014, 04:23:30 »

Quote from: jokrik on Sat, 18 January 2014, 03:57:14

Invoice paid thx for your hard work and keep the spirit up , spirit

Thank You! jokrik!

I enjoy the Keyboards as You Guys, I will try my Best for Your Pleasant Enjoy!

bakteria · « **Reply #1510 on:** Sat, 18 January 2014, 05:36:26 »

You are the spirit of the keyboard! Invoice paid!

jorgenslee · « **Reply #1511 on:** Sat, 18 January 2014, 08:03:09 »

Invoice Paid, thanks sprit.

JPG · « **Reply #1512 on:** Sat, 18 January 2014, 08:53:14 »

Paid invoice!

keymaster · « **Reply #1513 on:** Sat, 18 January 2014, 08:58:39 »

Show us some pictures of the TKL!

infiniti · « **Reply #1514 on:** Sat, 18 January 2014, 09:11:38 »

Paid my invoice as well.

geogga · « **Reply #1515 on:** Sat, 18 January 2014, 10:09:27 »

Wow, I just want to commend sprit on how nice he is, I don't see that much.

Now. you said the 2nd GB PCBs were presoldered right?( with everything except switch/LED I assume)
When is that? Like If I were to send in my google docs order today, would that be 1st GB or 2nd GB?

Also how do we choose between ANIS and ISO? Or does the firmware/keymapping/software take care of that?

Melanic · « **Reply #1516 on:** Sat, 18 January 2014, 10:33:31 »

Invoice Paid. But I noticed that there were no stabilizers on the order. Should I expect them in the 2nd round? I PM'd you and submitted my order for them a bit late...

Also, this question seems to be glanced over a lot...

Quote from: Melanic on Sat, 18 January 2014, 00:41:34

Question about the 60% firmware.
Does the caps lock LED change colour when I activate it? Assuming I use a multi colour LED.

Grendel · « **Reply #1517 on:** Sat, 18 January 2014, 15:19:45 »

I really appreciate the work and dedication you are putting into this Sprit. If I had known there are SMD parts to be soldered I would have stayed clear of the GB -- I don't have the tools and the eyesight to do this anymore. I would appreciate it very much if you would put the parts on. Thanks !

taylordcraig · « **Reply #1518 on:** Sat, 18 January 2014, 18:43:14 »

still looking forward to metal case
maybe 60% pcb

edit: can we order just springs?

nuclearsandwich · « **Reply #1519 on:** Sat, 18 January 2014, 20:26:31 »

Quote from: Grendel on Sat, 18 January 2014, 15:19:45

I really appreciate the work and dedication you are putting into this Sprit. If I had known there are SMD parts to be soldered I would have stayed clear of the GB -- I don't have the tools and the eyesight to do this anymore. I would appreciate it very much if you would put the parts on. Thanks !

If Sprit can't do your board I can as long as you don't mind it going to be California for a bit before heading to its home in the pacific northwest. I'm no super pro but I enjoyed the SMD that I've done.

fatchoi · « **Reply #1520 on:** Sat, 18 January 2014, 21:27:23 »

Will pay the invoice as long as I receive it today.
Hope the shipping within Asia is cheaper than to US/ Canada.

cherpalla · « **Reply #1521 on:** Sat, 18 January 2014, 21:54:46 »

Quote from: nuclearsandwich on Sat, 18 January 2014, 20:26:31

Quote from: Grendel on Sat, 18 January 2014, 15:19:45
I really appreciate the work and dedication you are putting into this Sprit. If I had known there are SMD parts to be soldered I would have stayed clear of the GB -- I don't have the tools and the eyesight to do this anymore. I would appreciate it very much if you would put the parts on. Thanks !

If Sprit can't do your board I can as long as you don't mind it going to be California for a bit before heading to its home in the pacific northwest. I'm no super pro but I enjoyed the SMD that I've done.

I love people like you.

AnalogBlu · « **Reply #1522 on:** Sat, 18 January 2014, 21:57:27 »

I'm a little confused. Being part of the first GB, will the 60% PCB I'll be getting require no soldering outside of the switches? Is sprit soldering all the SMDs and diodes? If so, a big

for sprit!

sprit · « **Reply #1523 on:** Sun, 19 January 2014, 01:00:56 »

Quote from: Melanic on Sat, 18 January 2014, 10:33:31

Invoice Paid. But I noticed that there were no stabilizers on the order. Should I expect them in the 2nd round? I PM'd you and submitted my order for them a bit late...

Also, this question seems to be glanced over a lot...

Quote from: Melanic on Sat, 18 January 2014, 00:41:34
Question about the 60% firmware.
Does the caps lock LED change colour when I activate it? Assuming I use a multi colour LED.

I sent a new Invoice for the Stabs!

The Multi Color LED changes its color itself automatically with time intervals.

YongJK · « **Reply #1524 on:** Sun, 19 January 2014, 01:06:57 »

Sprit, could you invoice me by today and ship within this week ?
Chinese New Year is coming. I wish to receive before 1st Feb.

Btw, do you provide led resistors + normal diodes in the 1st pcb gb?

Cottonsox · « **Reply #1525 on:** Sun, 19 January 2014, 02:54:43 »

Hi Sprit,

On the invoice it's mentions only pcb mount stabilizers because of moq. Will these work at all with a plate? Otherwise i will probably have to wait for gb2 to get the stabilizers sourced for my build.

would like to confirm before i pay the invoice, or i will need it changed, with he possibility of my things being held and all sent together if there is not issues.

sprit · « **Reply #1526 on:** Sun, 19 January 2014, 03:09:53 »

Quote from: Cottonsox on Sun, 19 January 2014, 02:54:43

Hi Sprit, On the invoice it's mentions only pcb mount stabilizers because of moq. Will these work at all with a plate? Otherwise i will probably have to wait for gb2 to get the stabilizers sourced for my build.would like to confirm before i pay the invoice, or i will need it changed, with he possibility of my things being held and all sent together if there is not issues.

AS You know, I was going to apply the Plate Mount Type Stabilizers on Metal Plates.

The Stabilizer Order for Plate Mount was under 60 sets. The Factory MOQ for the plate type MOQ was 1,000sets.
I was expecting to buy at least 500sets from the factory. But had to give up.

So, I've changed Metal Plate Design to PCB mount type, and Asking People's Decisions.

For the 2nd GB, I am going to order the Plate Mount Type at all, even with my money.

fatchoi · « **Reply #1527 on:** Sun, 19 January 2014, 03:28:35 »

Quote from: sprit on Sun, 19 January 2014, 01:00:56

Quote from: Melanic on Sat, 18 January 2014, 10:33:31
Invoice Paid. But I noticed that there were no stabilizers on the order. Should I expect them in the 2nd round? I PM'd you and submitted my order for them a bit late...

Also, this question seems to be glanced over a lot...

Quote from: Melanic on Sat, 18 January 2014, 00:41:34
Question about the 60% firmware.
Does the caps lock LED change colour when I activate it? Assuming I use a multi colour LED.

I sent a new Invoice for the Stabs!
The Multi Color LED changes its color itself automatically with time intervals.

Hi Sprit, received your invoice just now, thanks! But there is a problem with the new invoice #1443. #1443 contains items that I already paid for, in invoice #1273.
The correct item I have to pay under #1443 should be the stabilizers 2 sets $16, shipping $30, Group buy fee $3. Total is $49

For your easier checking, the invoices I received so far are 1225 (paid), 1273 (paid) and 1443 (not paid because of the problem)
Please send me a new invoice. Thank you again for organizing.

sprit · « **Reply #1528 on:** Sun, 19 January 2014, 03:36:09 »

Quote from: fatchoi on Sun, 19 January 2014, 03:28:35

The correct item I have to pay under #1443 should be the stabilizers 2 sets $16, shipping $30, Group buy fee $3. Total is $49

Sorry ! I forgot to mark PAID!

I sent it again!

justnits · « **Reply #1529 on:** Sun, 19 January 2014, 03:38:32 »

Quote from: sprit on Sun, 19 January 2014, 03:36:09

Quote from: fatchoi on Sun, 19 January 2014, 03:28:35

The correct item I have to pay under #1443 should be the stabilizers 2 sets $16, shipping $30, Group buy fee $3. Total is $49

Sorry ! I forgot to mark PAID!

I sent it again!

sprit, did u receive my PM regarding a cancellation order for invoice #1429 ? because i cancelled my order for springs earlier.

sprit · « **Reply #1530 on:** Sun, 19 January 2014, 03:45:58 »

Quote from: justnits on Sun, 19 January 2014, 03:38:32

sprit, did u receive my PM regarding a cancellation order for invoice #1429 ? because i cancelled my order for springs earlier.

#1429 62g spring order cancelled! I worried I missed it in Your 3rd Order Form

Justin! The Others are OK?

justnits · « **Reply #1531 on:** Sun, 19 January 2014, 03:48:21 »

Quote from: sprit on Sun, 19 January 2014, 03:45:58

Quote from: justnits on Sun, 19 January 2014, 03:38:32

sprit, did u receive my PM regarding a cancellation order for invoice #1429 ? because i cancelled my order for springs earlier.
#1429 62g spring order cancelled! I worried I missed it in Your 3rd Order Form

Justin! The Others are OK?

no worries! if there's anything missed out in my previous invoice, i will PM you or reply you here

all my orders are ok,
but a minor changes, can you kindly help to solder the SMD parts on my 2 pcb order?

fuus · « **Reply #1532 on:** Sun, 19 January 2014, 03:49:36 »

Hey Sprit, please inform us when all the shipping invoices have been sent out

sprit · « **Reply #1533 on:** Sun, 19 January 2014, 03:51:47 »

Quote from: fuus on Sun, 19 January 2014, 03:49:36

Hey Sprit, please inform us when all the shipping invoices have been sent out

OK! fuus!

Now Almost 80% sent Out!

I am working on now! Oh! I want to smoke !

Zeal · « **Reply #1534 on:** Sun, 19 January 2014, 03:55:49 »

Quote from: sprit on Sun, 19 January 2014, 03:09:53

Quote from: Cottonsox on Sun, 19 January 2014, 02:54:43
Hi Sprit, On the invoice it's mentions only pcb mount stabilizers because of moq. Will these work at all with a plate? Otherwise i will probably have to wait for gb2 to get the stabilizers sourced for my build.would like to confirm before i pay the invoice, or i will need it changed, with he possibility of my things being held and all sent together if there is not issues.

AS You know, I was going to apply the Plate Mount Type Stabilizers on Metal Plates.

The Stabilizer Order for Plate Mount was under 60 sets. The Factory MOQ for the plate type MOQ was 1,000sets.
I was expecting to buy at least 500sets from the factory. But had to gave up.

So, I've changed Metal Plate Design to PCB mount type, and Asking People's Decisions.

For the 2nd GB, I am going to order the Plate Mount Type at all, even with my money.

So you've modified the aluminum plate to use PCB mount stabilizers?

Guess I should start reading about clipping PCB Stabs...

sprit · « **Reply #1535 on:** Sun, 19 January 2014, 04:13:39 »

Quote from: Zeal on Sun, 19 January 2014, 03:55:49

So you've modified the aluminum plate to use PCB mount stabilizers?
Guess I should start reading about clipping PCB Stabs...

Actully All Other Korean Custom Plates are Only for PCB mount type Stabilizers.

I was to apply Plate Mount Type for the Metal Plates in the 1st GB.

Anyway, I will do it for the 2nd GB!

xandr · « **Reply #1536 on:** Sun, 19 January 2014, 04:30:16 »

Yo Sprit, could you give me a shout whether Invoice 1402 is good for shipping of both 0002 and 1404 together or if you're going to send a new invoice to replace 1402?

sprit · « **Reply #1537 on:** Sun, 19 January 2014, 04:38:46 »

Quote from: xandr on Sun, 19 January 2014, 04:30:16

Yo Sprit, could you give me a shout whether Invoice 1402 is good for shipping of both 0002 and 1404 together or if you're going to send a new invoice to replace 1402?

Hello! Mr. Xander!

Yes! Friend! The Shipping Invoice is Good for #0002 and 1404 !

Thank You for remind me !

xandr · « **Reply #1538 on:** Sun, 19 January 2014, 04:53:59 »

Everything paid. You're the man, Sprit!

justnits · « **Reply #1539 on:** Sun, 19 January 2014, 05:10:39 »

Quote from: sprit on Sun, 19 January 2014, 04:13:39

Quote from: Zeal on Sun, 19 January 2014, 03:55:49
So you've modified the aluminum plate to use PCB mount stabilizers?
Guess I should start reading about clipping PCB Stabs...

Actully All Other Korean Custom Plates are Only for PCB mount type Stabilizers.

I was to apply Plate Mount Type for the Metal Plates in the 1st GB.

Anyway, I will do it for the 2nd GB!

is the first batch of alu plate Plate Mount Stabilizers only or PCB Mount or both?

sprit · « **Reply #1540 on:** Sun, 19 January 2014, 05:18:20 »

Quote from: justnits on Sun, 19 January 2014, 05:10:39

Quote from: sprit on Sun, 19 January 2014, 04:13:39
Quote from: Zeal on Sun, 19 January 2014, 03:55:49
So you've modified the aluminum plate to use PCB mount stabilizers?
Guess I should start reading about clipping PCB Stabs...

Actully All Other Korean Custom Plates are Only for PCB mount type Stabilizers.

I was to apply Plate Mount Type for the Metal Plates in the 1st GB.

Anyway, I will do it for the 2nd GB!

is the first batch of alu plate Plate Mount Stabilizers only or PCB Mount or both?

The Metal Plates for the 1st GB are for the PCB-mount Stabilizers Only.

justnits · « **Reply #1541 on:** Sun, 19 January 2014, 05:25:42 »

Quote from: sprit on Sun, 19 January 2014, 05:18:20

Quote from: justnits on Sun, 19 January 2014, 05:10:39
Quote from: sprit on Sun, 19 January 2014, 04:13:39
Quote from: Zeal on Sun, 19 January 2014, 03:55:49
So you've modified the aluminum plate to use PCB mount stabilizers?
Guess I should start reading about clipping PCB Stabs...

Actully All Other Korean Custom Plates are Only for PCB mount type Stabilizers.

I was to apply Plate Mount Type for the Metal Plates in the 1st GB.

Anyway, I will do it for the 2nd GB!

is the first batch of alu plate Plate Mount Stabilizers only or PCB Mount or both?

The Metal Plates for the 1st GB are for the PCB-mount Stabilizers Only.

PCB mount only??
i order 1 Silver 4mm Alu Plate...which means it's for PCB mount?

sprit, can you change my 2 stabilizers order (1 set Plate mount stabilizers with 6.25 metal bar for 87 and 1 set PCB mount stabilizers with 7.0 metal bar for 87% into 2 sets PCB mount stabilizers with 1 6.25 and 1 7.0 metal bars for 87%?

Elias Camber · « **Reply #1542 on:** Sun, 19 January 2014, 05:53:17 »

wow,
looking forward to seeing how these pcb-mounted cherry stabs are going to get a hold in a 4mm metal plate. If I remember correctly the distance between those clips going through the pcb and the actual bottom of the stab is far less than 4mm. I wonder if you had to drill those plates from the bottom... really interesting.
Anyways just paid the latest invoice... and don't bother with the soldering Sprit, looking forward to doing this myself.
And thanks again for this amazing GB.

sprit · « **Reply #1543 on:** Sun, 19 January 2014, 06:15:49 »

Quote from: Elias Camber on Sun, 19 January 2014, 05:53:17

wow,
looking forward to seeing how these pcb-mounted cherry stabs are going to get a hold in a 4mm metal plate. If I remember correctly the distance between those clips going through the pcb and the actual bottom of the stab is far less than 4mm. I wonder if you had to drill those plates from the bottom... really interesting.
Anyways just paid the latest invoice... and don't bother with the soldering Sprit, looking forward to doing this myself.
And thanks again for this amazing GB.

Hello ! Elias Camber !!

Really Sorry for the Plate-mount Stab. I am so frustrated not get them for the 1st GB.

As You know, My PCBs are for Both PCB- and Plate- Mount SWs and Stabilizers.
So, Metal Plate + PCB mount Stabilizer is No Problem. It's CNC Machiened.

All Korean Customs are Plate + PCB mount Stabilizers Now. But I want to try a diffenet way.

Only for the Metal Plates, Stabilizers are changed to PCB mount Type.
The Acryl 5mm Plate are for the PCB mount Stabilizers From the begining.

I posted the Pic in the IC before.

Elias Camber · « **Reply #1544 on:** Sun, 19 January 2014, 06:34:18 »

Don't worry, I don't have any problems with pcb-mounted Stabs.
I have a question for you:
I remember you talking about hardness of plates for your fingers and I find this to be true.
I really like the feel on the normal G80s giving in a little bit to the force an even dampening the sound a little bit.
If I was looking for this kind of feeling, would you advise me to get one of your acrylic plates, like 2mm?

pichu23 · « **Reply #1545 on:** Sun, 19 January 2014, 06:39:33 »

ugpm sprit.

sprit · « **Reply #1546 on:** Sun, 19 January 2014, 07:01:35 »

Thanks! Elias!

If You like the Cherry Original G80 Keyboards (No Plates), My personal Opinion is : No Plate.
Because Our 1st GB PCBs are 1.6mm Thick, I feel They are Just a little bit stronger and a little bit less sound.
I Really like keyboards without Plate Too!

http://www.kbdmania.net/xe/photo/7638625

YongJK · « **Reply #1547 on:** Sun, 19 January 2014, 07:15:13 »

Quote from: YongJK on Sun, 19 January 2014, 01:06:57

Sprit, could you invoice me by today and ship within this week ?
Chinese New Year is coming. I wish to receive before 1st Feb.

Btw, do you provide led resistors + normal diodes in the 1st pcb gb?

hello sprit,
could you get back to my questions?

sprit · « **Reply #1548 on:** Sun, 19 January 2014, 07:38:39 »

Quote from: YongJK on Sun, 19 January 2014, 07:15:13

Quote from: YongJK on Sun, 19 January 2014, 01:06:57
Sprit, could you invoice me by today and ship within this week ?
Chinese New Year is coming. I wish to receive before 1st Feb.

Btw, do you provide led resistors + normal diodes in the 1st pcb gb?
hello sprit,
could you get back to my questions?

Hello! YongJK!

Sorry !! I ve Just sent Your Shipping Invoice!

Shipping to Malaysia will take 3 days, Hope You get before 1st. Feb!

baldgye · « **Reply #1549 on:** Sun, 19 January 2014, 07:45:07 »

any pics of the TLK front plate yet?

? >.<

News:

Author Topic: [SPRiT] R1 R2 (Shipping 92% Completed) (Read 1783968 times)