[SPRiT] R1 R2 (Shipping 92% Completed)

[mooswa]

...
Oh!  My!    ..      Mistaking put an answer to a PM... On here !      

(Edited)
(Attachment Link)

Must have been answer to my PM I've never received.  But I haven't red it here either ;-)

[sprit]

...
Oh!  My!    ..      Mistaking put an answer to a PM... On here !      

(Edited)
(Attachment Link)

Must have been answer to my PM I've never received.  But I haven't red it here either ;-)

Hi mooswa!      PM sent ! 

[justnits]

...
Oh!  My!    ..      Mistaking put an answer to a PM... On here !      

(Edited)
(Attachment Link)

Must have been answer to my PM I've never received.  But I haven't red it here either ;-)

Hi mooswa!      PM sent !

hi sprit! sent u a PM

[archer]

Hey Sprit,
Just got your shipping invoice and paid it (#1490)! In it, you had a note saying "what pcb?" with each of my acrylic cases.. the answer to that is none. I only ordered the 2 cases, no PCBs

Thanks for everything!

[mooswa]

Hi mooswa!      PM sent !
[/quote]

Thanks! Paid for order 1450. I will go with white pcb.

[blighty]

Will the orders have tracking info? 

[Zeal]

Will the orders have tracking info?

EMS always has tracking

[lilky]

Hey Sprit, when can we expect Round 1 to ship by? Also, I PM'd you about changing my order if possible.

[cookiesowns]

Hey Sprit, when can we expect Round 1 to ship by? Also, I PM'd you about changing my order if possible.

He said he's trying to get everything out by end of Jan. But if you want pre-soldered diodes, that might not be possible. Apparently Sprit is still waiting for the final batch of springs

[sprit]

Which One Do You Prefer ?
 

I got a sample A,  but delivered ones were B.
I ordered it again,  I got Stabilizer A yesterday.

A is Stainless,  B is Cherry original Tin(Sn) plated.


 


   

[sprit]

I am still waiting for the Springs to be Gold Plated.   Before the Lunar New Year, All seems busy here in Korea.
 
Really Sorry for that !   

I've produced 100sets Each for 50g, 55g, 60g, 62g, 65g, 68g, 70g, 80g.       40 sets for 100g, 120g.    

[justnits]

Which One Do You Prefer ?
 

I got a sample A,  but delivered ones were B.
I ordered it again,  I got Stabilizer A yesterday.

A is Stainless,  B is Cherry original Tin(Sn) plated.


(Attachment Link)  


(Attachment Link)

Sprit, i'll have Stabilizer B type for both my stabilizers order.
i didn't order spring, can my orders be shipped out earlier like how i mention to you in PM? >.<

[HPE1000]

Which One Do You Prefer ?
 

I got a sample A,  but delivered ones were B.
I ordered it again,  I got Stabilizer A yesterday.

A is Stainless,  B is Cherry original Tin(Sn) plated.


(Attachment Link)  


(Attachment Link)

What is the difference between the two? Is there any difference in the feel or functionality?

I am still waiting for the Springs to be Gold Plated.   Before the Lunar New Year, All seems busy here in Korea.
 
Really Sorry for that !   

I've produced 100sets Each for 50g, 55g, 60g, 62g, 65g, 68g, 70g, 80g.       40 sets for 100g, 120g.

That is okay, hopefully they are done soon though

Quite impressive how you were able to get 100g and 120g springs produced at such numbers. People on geekhack tried to get springs like this before through the supplier originativeco uses and the MOQ for springs that were over 100g was 50,000.

[lotus1109]

Which One Do You Prefer ?
 

I got a sample A,  but delivered ones were B.
I ordered it again,  I got Stabilizer A yesterday.

A is Stainless,  B is Cherry original Tin(Sn) plated.


(Attachment Link)  


(Attachment Link)     (Attachment Link)

I would like to have B as my stabiliser. Thanks and appreciate your work Sprit

[Grendel]

A would be great, B will do.

[Zeal]

Is there a difference in feel between the two? Stainless looks shiny while Cherry original has a dull, typical tin look to it

I think Stainless steel stabilizers would feel smoother due to the slippier and shinier material regardless of lube. Am I wrong to assume so?

[dorkvader]

Is there a difference in feel between the two? Stainless looks shiny while Cherry original has a dull, typical tin look to it

I think Stainless steel stabilizers would feel smoother due to the slippier and shinier material regardless of lube. Am I wrong to assume so?

I suspect there will be no difference in feel. As such, I prefer typeB 'cause it looks cooler. Still, I don't think I ordered any, so I'll just use the ones I have here.

[pichu23]

Type B for me too please.
and ugpm !

[cookiesowns]

Which One Do You Prefer ?
 

I got a sample A,  but delivered ones were B.
I ordered it again,  I got Stabilizer A yesterday.

A is Stainless,  B is Cherry original Tin(Sn) plated.


(Attachment Link)  


(Attachment Link)     (Attachment Link)

Which one do you think is better? Is cherry original stabilzer Stainless + plating? Or just steel + plating?

[xandr]

I'm cool with B

[BlueBär]

Why not gold plated stabilizers?

[Zeal]

Why not gold plated stabilizers?

  Good feeling of oneness with gold stabilizers 

#GoldPlatedEverything

#Sifo

[Zeal]

And regarding stabilizer bars, i didn't notice the difference in spacebar bar design while viewing the thread on my phone. What's the extra indent on the Cherry spacebar stabilizers for? Or is that how 7x units look? 

[meiosis]

And regarding stabilizer bars, i didn't notice the difference in spacebar bar design while viewing the thread on my phone. What's the extra indent on the Cherry spacebar stabilizers for? Or is that how 7x units look? 

One has an upward curve kind of some tension break, both work fine, just aesthetics straight vs a more refined version

[fuus]

I don't care which type of stabs I get, as long as they allow
For a 6.25 space!

[Permeability]

Hi sprit,

I paid my shipping invoice/ gave you and updated address Via PM. Please check. Also if you could help me solder on diodes so I only have to do switches I would like that, Thanks!!! 

[lilky]

Sprit I've been sending you multiple PMs with the same question over the past 2 weeks now and still no response...please respond, I am getting nervous...

[durandalx]

Paid!  Looking forward to getting this stuff!

[sprit]

Sprit I've been sending you multiple PMs with the same question over the past 2 weeks now and still no response...please respond, I am getting nervous...

Hi!  lilky!       How are You!
Do you mean from Jan. 21th ?
I answered on 22th, plz give me time to Update Your New Order.   
 I need check the factory for your new change.

[reziak]

Hey Sprit or anyone who knows the answer,

How does one go about setting up the layout of the board? I know firmware is pre-installed, but do I need to download something else to alter the layout? Assuming I don't mess up the diodes, I'd like to do a 1+1 backspace and 1.75+1 shift.

Also, any tips for soldering diodes?  My soldering experiencing is limited to through hole LEDs and switches. Through hole diodes would work with this board, right?

[blighty]

Hey Sprit or anyone who knows the answer,

How does one go about setting up the layout of the board? I know firmware is pre-installed, but do I need to download something else to alter the layout? Assuming I don't mess up the diodes, I'd like to do a 1+1 backspace and 1.75+1 shift.

Also, any tips for soldering diodes?  My soldering experiencing is limited to through hole LEDs and switches. Through hole diodes would work with this board, right?

I thought diodes were still being soldered on by sprit?

[Cottonsox]

I was under the same impression.

[reziak]

Hey Sprit or anyone who knows the answer,

How does one go about setting up the layout of the board? I know firmware is pre-installed, but do I need to download something else to alter the layout? Assuming I don't mess up the diodes, I'd like to do a 1+1 backspace and 1.75+1 shift.

Also, any tips for soldering diodes?  My soldering experiencing is limited to through hole LEDs and switches. Through hole diodes would work with this board, right?

I thought diodes were still being soldered on by sprit?

I bought this from someone else. It was one of the first to go out and does not have diodes or resistors soldered. Still looking for an answer to my question!

[Dyelbro]

Could someone help me out a bit?  I am fairly new to the community and I would really like to order one of these, but the problem is I have no idea what most of the stuff on here even is.  I want to order a tenkeyless board here with an aluminum case.  I was wondering if someone could walk me through the groupbuy page.

[lotus1109]

Could someone help me out a bit?  I am fairly new to the community and I would really like to order one of these, but the problem is I have no idea what most of the stuff on here even is.  I want to order a tenkeyless board here with an aluminum case.  I was wondering if someone could walk me through the groupbuy page.

https://docs.google.com/forms/d/1avh0wGJIpLXC8duM5XfIOMrk8eCp6ZGE27QY08WDqcg/viewform
just go through the form and since you are looking for tenkeyless board, it would be 87% pcb with 87% plate and casing,,,
but if you are really new about it, I would suggest you to do more researches before making decision

anyways sprit, shipped any? 

[Dyelbro]

You have to start somewhere, right?

[justnits]

You have to start somewhere, right?

are you looking to build your own custom keyboard or you want to buy a ready made ones?

[Kit-Bar]

Sprit,

So are these boards pre soldered and all we have to is solder the LED and switches? I am confused.

[cookiesowns]

Sprit,

So are these boards pre soldered and all we have to is solder the LED and switches? I am confused.

Yes, hence why there are delays. If you wish to get them quicker, you can request to just get a bag of the SMD diodes to solder yourself.

[lilky]

Hey Sprit or anyone who knows the answer,

How does one go about setting up the layout of the board? I know firmware is pre-installed, but do I need to download something else to alter the layout? Assuming I don't mess up the diodes, I'd like to do a 1+1 backspace and 1.75+1 shift.

Also, any tips for soldering diodes?  My soldering experiencing is limited to through hole LEDs and switches. Through hole diodes would work with this board, right?

Thanks Sprit!

[heissler]

Ordered one of those in all blue, wow very keyboard, such color.

[Puddsy]

Sprit, can you cancel my invoice please? It's come to my attention that I won't be able to pay for this wonderful group buy.

[sprit]

Hello! Guys!    

Because of the Lunar New Year Holiday,  I will be backtill Feb.04.

Really Sorry fot that !!

[sprit]

Sprit, can you cancel my invoice please? It's come to my attention that I won't be able to pay for this wonderful group buy.

Hello!  TacticalStache!    I am in the Lunar New Year Holiday.  I will check yours as soo a Possible !      

[lotus1109]

That means you will start shipping at 4th of February?

I hope I can get it as soon as possible thanks!

[SlithyDash]

Hey Sprit. I just wanted to check that the PCB is compatible with matis switches and their led placement. Are the leds compatible (as in will they fit) with the switches as well? Also how much is the metal case?

[Puddsy]

Hey Sprit. I just wanted to check that the PCB is compatible with matis switches and their led placement. Are the leds compatible (as in will they fit) with the switches as well? Also how much is the metal case?

It's not compatible with matias switches, you'll have to wait for the ALPS PCB group buy.

[Kit-Bar]

Is there a picture of exactly what the metal cases look like? I am interested in the 87% but I cant find an exact picture of the case

[baldgye]

Yeah I'm also waiting on seeing a finished board with switches etc (though TKL)

[FrostyToast]

I just put in my order for one 60% PCB! My payment might be slightly delayed because this goes over my current spending limit.