[SPRiT] R1 R2 (Shipping 92% Completed)

[sprit]

Agreed. The same combo with purple would also be awesome.

Purple color  effect  may get with side/ Bottom purple  LEDs

Side / Bottom LEDs  are easy to  put,  along  with  general  Top LEDs,  as  We know.

[sprit]

Status  -  July   18th


Round 1  :  Shipping  on going   (~ 37 persons left to ship)

-  Most of Small parts orders are already shipped out.

-  Doing diode soldering before shipping Now.          http://geekhack.org/index.php?topic=50580.msg1405742#msg1405742   
-  Sending a Personal message before each shipping to Reconfirm the details!       
-  Finish the Shipping : by August 8th (11th)   
-  So Sorry for the Delay !!   I'm a sinner.        


   
Round 2  :  Start Invoicing   80% Done!  -  (Proxy Shipping will be prepared)

-  PCB   :  60%  hit the MOQ (all SMD presoldered) -  Start Invoicing.   
-  PCB   :  75% (20pcs needed for the MOQ),     87% (20pcs needed for the MOQ),     110%(40pcs needed for the MOQ) 
* IF the MOQ fails, The main controller Parts will be presoldered, then You may need to solder the diodes, LED resistors (It's very time consuming but Not that difficult and some fun)
-  Metal Plates,  Metal Cases  :  Far below the MOQ,  Failed. 
-  Acrylic Plates, Cases  :  hit the MOQ,  Start Invoicing. 
-  The other Parts  :  hit the MOQ,  Start Invoicing.      Spring GB R2  90%Invoiced.
-  The Proxy shipping to Save cost will be prepared for the PCB and small Parts.
 
-  Order by ~21th  (26th)
-  Start  Parts supply & Production    :  from  July 21th ~ 
-  Start Inspection & Packiing     :   from  August 11th ~
-  Start Shipping   :   From August 15th ~ 
-  Finish Shipping  :   by Sep. 15th
 
   

[archer]

Hey Sprit, ygpm

[sprit]

Hey Sprit, ygpm

Thanks!!      I  will  PM  You  When  the PCBs and  others are ready  to ship!!

[sprit]

Hi! Xauer!!    I was going  to PM You     

So Sorry !! for  the Metal  Case  and Plate  !!         
I have been tried  to  cut the Plates so detailed, the  Result is some 5~8 sharp edges  Around SWs,  Stabs.    
The Factory  says  :  I am too Stupid !  too complicated Plate details.   


-    110% 5mm  Acrylic  Plate is  precisely well made to  my CAD drawings,  especially  detailed :
      http://geekhack.org/index.php?action=dlattach;topic=50580.0;attach=71226;image
      http://geekhack.org/index.php?topic=50580.msg1373251#msg1373251

-    Would Please send  Me a New form  for  110% ?   https://docs.google.com/forms/d/1avh0wGJIpLXC8duM5XfIOMrk8eCp6ZGE27QY08WDqcg/viewform

-    I'd like recommend 110% Acrylic Plate  option :  Clear,  ClearFrosty(matte),  Skyblue(Smooth)  : Already  in stock to be  prepared !!

-    The metal Plate refund issues will be  PMed   Before Shipping!   

[fatchoi]

Hey Sprit, ygpm

Thanks!!      I  will  PM  You  When  the PCBs and  others are ready  to ship!!

Oh no. The picture looks so great that I'm tempted to buy an extra turquoise layer for my 80%.
Sprit, kindly check PM and invoice me.

[sprit]

Hey Sprit, ygpm

Thanks!!      I  will  PM  You  When  the PCBs and  others are ready  to ship!!

Oh no. The picture looks so great that I'm tempted to buy an extra turquoise layer for my 80%.
Sprit, kindly check PM and invoice me.

Oh! No!  Save money!   My Papa!   

[sprit]

LED Effects  -  Side  /  Bottom


   https://www.youtube.com/watch?v=J4eA1TqGN8w
   https://www.youtube.com/watch?v=o2oAjCjCaUE
   

[/font]

[fuus]

I finally bothered to take some pictures! No caps or case as of yet, just sorting some teething issues. Yey flashy lights!

[sprit]

When You got Acrylic  Plates,  Cases  :

-   Clean up gently  the edges  for dust, with  damping  clothe  or  fine brush.  and Keep it.
-   Only When start to assemble,  Remove  protect film on both sides

Please! 

[okwchin]

Have an invoice for R2, but if I need to change whats ordered, what the best way of going about this. Should I re-submit a order form on google docs? 

I did that for your springs, got an invoice, and paid it right away.

[sprit]

It's  OK!   
Take Your Time on things,  You can PM me!
All are  same as R1, just Cases  have  Model 1,2,3.   
You can confer the 1st Page of This Thread, and  the Order Form  for the updates!   

[sprit]

How to Transform Your   :  Case  Model 1  to  Model 2, 3 Slim  ?



-  Remove the Top Layer, it becomes 2-Layerd.   
-  Look!   Voila!   (Voara  : in Korean)  You have  Model 2, or 3 Slim!
-  Don't Worry !
-  I have already included  extra  bolts  and  small  accessaries in Your Model 1  shipping for the Transformation .
-  I know,  I missed  to some,  I will include it  in Your 'Springs Round 2 GB'  bags.   

[cookiesowns]

How to Trasform Your   :  Case  Model 1  to  Model 2, 3 Slim  ?



-  Remove the Top Layer, it becomes 2-Layerd.   
-  Look!   Voila!   (Voara  : in Korean)  You have  Model 2, or 3 Slim!
-  Don't Worry !
-  I have already included  extra  bolts  and  small  accessaries in Your Model 1  shipping for the Transformation .
-  I know,  I missed  to some,  I will include it  in Your 'Springs Round 2 GB'  bags.   

Sweet!

Excited to see my order come through sprit! Can't wait!

[abtrout]

-  Don't Worry !

ok! 

[sprit]

60%  Color  Case *  : Laser & CNC Machined  :: All Solid 8T Structure
 

-   Item           :   Sprit  Model 2, 3 Super Slim       
-   2-Colored    :  18mm  Low Height (higher than Poker II),  Strong Metal Bolting holes.   
-   Weight       :   Net 450-550g max.     (*Poker stock case : 120g )   
-   Pirce          :   $55  /  1set       
-   Supports   :   Poker I, II, Pure 60%, GH60, Face U, W, most 60% Custom PCBs
-   Model 1  Case  can be easily transformed to Model 2, 3
 
  My beloved since 1984

[okwchin]

For R2, are the 1.6mm aluminium plates still available? or are these no longer available.

I ask because the Googledocs form no longer has the 1.6mm plates in the list.

[kakakowie]

For R2, are the 1.6mm aluminium plates still available? or are these no longer available.

I ask because the Googledocs form no longer has the 1.6mm plates in the list.

It was mentioned that orders fell below the MOQ and couldnt be made. If you look at the order form I think it indicates its not available.

[sprit]

I will look into that, and post answers! 

[sprit]

It was mentioned that orders fell below the MOQ and couldnt be made. If you look at the order form I think it indicates its not available.

Yes!  Your are Right! 
I mentioned the MOQ Status in the Order Form.
Hello,  kakakowie,  all OK  in Your Invoice?

[Loligagger]

Hey sprit, sent you a pm.

[Vibex]

Paid.

[sprit]

Hey sprit, sent you a pm.

I got Yours!   So Sorry for the 68g.
I will ship to Canada  this Week!!!     

[sprit]

I will be back online in 10 hrs! 
 
Have a Nice Day/ Nite  !   

[xauser]

Paid! Thank you Sprit!

[KaboomTheory]

I know I'm late but is it still possible to order?

[Zeal]

I know I'm late but is it still possible to order?

You can still order for R2.

[KaboomTheory]

I know I'm late but is it still possible to order?

You can still order for R2.

Sweet thanks. Ordering now.

[TBone]

Hi, Sprit this is refreshingly awesome!

1) How long can we order?

2) If I wanted a case for a TKL Phantom keyboard, would I get the 87%? Is a TKL 87%?

3) And so no metal cases in R2? Any plans for those in R3 (if there were one)?

[Zeal]

Hi, Sprit this is refreshingly awesome!

1) How long can we order?

2) If I wanted a case for a TKL Phantom keyboard, would I get the 87%? Is a TKL 87%?

3) And so no metal cases in R2? Any plans for those in R3 (if there were one)?

Round 2 orders will be open until Saturday, July 26
Yes, the Phantom PCB will fit Sprit's 87% TKL case
Metal cases were cancelled in R1 & R2 due to low MOQ. There might be an appearance in R3.

[KaboomTheory]

Zeal, if I don't choose a plate will that mean that the switches are pcb mounted (making them easily swappable?) or is that most possible?

[TBone]

Hi, Sprit this is refreshingly awesome!

1) How long can we order?

2) If I wanted a case for a TKL Phantom keyboard, would I get the 87%? Is a TKL 87%?

3) And so no metal cases in R2? Any plans for those in R3 (if there were one)?

Round 2 orders will be open until Saturday, July 26
Yes, the Phantom PCB will fit Sprit's 87% TKL case
Metal cases were cancelled in R1 & R2 due to low MOQ. There might be an appearance in R3.

Ok thanks Zeal. And could I just buy a case and supply everything else?

[Zeal]

Zeal, if I don't choose a plate will that mean that the switches are pcb mounted (making them easily swappable?) or is that most possible?

Sprit will provide PCB mount switches if your order does not contain a plate. You can also leave a comment for PCB mount switches as a reminder. 
*he just updated his order form for PCB/Plate type switches

Sprit will also PM/email you for confirmation before sending your order out.

Ok thanks Zeal. And could I just buy a case and supply everything else?

Yes, you're free to order a case by itself.

[KaboomTheory]

Zeal, if I don't choose a plate will that mean that the switches are pcb mounted (making them easily swappable?) or is that most possible?

Sprit will provide PCB mount switches if your order does not contain a plate. You can also leave a comment for PCB mount switches as a reminder. 
*he just updated his order form for PCB/Plate type switches

Sprit will also PM/email you for confirmation before sending your order out.

Ok thanks Zeal. And could I just buy a case and supply everything else?

Yes, you're free to order a case by itself.

So that means I don't have to desolder if I ever wanna change switches right? Do you think I should get a plate and stop being lazy? Lol.

[Zeal]

Zeal, if I don't choose a plate will that mean that the switches are pcb mounted (making them easily swappable?) or is that most possible?

Sprit will provide PCB mount switches if your order does not contain a plate. You can also leave a comment for PCB mount switches as a reminder. 
*he just updated his order form for PCB/Plate type switches

Sprit will also PM/email you for confirmation before sending your order out.

Ok thanks Zeal. And could I just buy a case and supply everything else?

Yes, you're free to order a case by itself.

So that means I don't have to desolder if I ever wanna change switches right? Do you think I should get a plate and stop being lazy? Lol.

Sprit's Acrylic plates have extra cutouts to remove switch tops without desoldering. If you'll be swapping springs/stems, might as well get a plate to help with stability, since you'll still be able to remove tops with the plate installed.

[KaboomTheory]

Zeal, if I don't choose a plate will that mean that the switches are pcb mounted (making them easily swappable?) or is that most possible?

Sprit will provide PCB mount switches if your order does not contain a plate. You can also leave a comment for PCB mount switches as a reminder. 
*he just updated his order form for PCB/Plate type switches

Sprit will also PM/email you for confirmation before sending your order out.

Ok thanks Zeal. And could I just buy a case and supply everything else?

Yes, you're free to order a case by itself.

So that means I don't have to desolder if I ever wanna change switches right? Do you think I should get a plate and stop being lazy? Lol.

Sprit's Acrylic plates have extra cutouts to remove switch tops without desoldering. If you'll be swapping springs/stems, might as well get a plate to help with stability, since you'll still be able to remove tops with the plate installed.

You're a lifesaver. Ily.

[prox]

Could someone please direct me to some photos of both 'White Frosty & Matte' and 'Clear Frosty & Matte'? Not sure which one I want to order

Thanks

[sprit]

Could someone please direct me to some photos of both 'White Frosty & Matte' and 'Clear Frosty & Matte'? Not sure which one I want to order
Thanks

May I ?        

http://geekhack.org/index.php?action=dlattach;topic=50580.0;attach=71628;image

[prox]

Could someone please direct me to some photos of both 'White Frosty & Matte' and 'Clear Frosty & Matte'? Not sure which one I want to order
Thanks

May I ?        

http://geekhack.org/index.php?action=dlattach;topic=50580.0;attach=71628;image
(Attachment Link)

Thanks!
What is the difference between Matte Clear and Matte White?

[sprit]

Thanks!
What is the difference between Matte Clear and Matte White?

Ice  :  Snow   ?   I'd like to say.   

[prox]

Thanks!
What is the difference between Matte Clear and Matte White?

Ice  :  Snow   ?   I'd like to say.   

That makes sense! Right, time to get my money organised 

[KaboomTheory]

Does anyone know what cases are compatible with the TKL pcb?

[Zeal]

Does anyone know what cases are compatible with the TKL pcb?

Sprit's TKL acrylic case! 

I'm not sure about the other TKL cases out there, so I won't comment on that. (Most custom TKL cases on the market already have a paired up PCB)

[yicaoyimu]

Does anyone know what cases are compatible with the TKL pcb?

All A.87 compatible TKL case should work, i.e. LZ, Gon.

[quochung1989]

I wanna change my order, please check inbox sprit

[sprit]

I wanna change my order, please check inbox sprit

I got it late last Nite!   OK!  I will update it Sir!   

And I need to answer MR. Keymaster's Black Bottom matte Finished Case... 

[sprit]

Model 1  Converted to  Model 3 Slim  ?   
-   Cottonsox's Work!!     
     
         
http://geekhack.org/index.php?topic=60946.msg1410911#msg1410911

     

[quochung1989]

I wanna change my order, please check inbox sprit

I got it late last Nite!   OK!  I will update it Sir!   

And I need to answer MR. Keymaster's Black Bottom matte Finished Case... 

Thank you so much I have received invoice and paid. Plz check help me

[jlor]

Hey sprit, I know this is pretty early on, but.. Do you have an ETA on the R2 orders? Especially the 110% PCB I ordered?

Just so I can start planning the build for the gfs keyboard.

[edit]
Sprit graciously pointed me to his one week old timetable on the previous page in this thread. I feel like I have egg on my face now..
Thanks sprit!

[sprit]

I am going to ship some  :  to Sweden, UK, USA  tomorrow !

Thanks for Your Patience!!!