Author Topic: MiMiC Cables - Custom Sleeved Cables  (Read 438886 times)

0 Members and 1 Guest are viewing this topic.

Offline mistakemistake

  • Global Loveinator
  • Thread Starter
  • Posts: 373
Re: MM Custom Sleeved Cables - Coming Soon
« Reply #150 on: Thu, 04 October 2012, 14:42:41 »
ah, darn, was hoping for some flat wired ones. oh well, will probably order some other colors from you though anyways. Can't wait to see the color legend so that I don't accidentally get the wrong colors!

Hey, if you want it flat. I'll MAKE it flat :)  I should have all of the samples labeled by the end of the weekend!

so you can make flat cables as well?! if you can make something similar to
Show Image
then you sir, have an order from me like...yesterday!

I know I can get the flat sleeving. I need to check if I can still get the flat cable. I'll let you know by next Tuesday at the latest.

Offline mistakemistake

  • Global Loveinator
  • Thread Starter
  • Posts: 373
Re: MM Custom Sleeved Cables - Coming Soon
« Reply #151 on: Thu, 04 October 2012, 14:48:35 »
===================================
Update: Completed Cables - shipping tomorrow!

**For those of you who originally ordered carbon fiber, I have gotten with most of you and have ordered new sleeves, or whatever we worked out!  Thank you to everyone who ordered a cable and being patient with me during this process!

Once, again thank you to everyone. Without geekhack this wouldn't have been possible. 100% made from my next cable sold will go to geekhack!

Cheers!
===================================




Offline wiredPANDA

  • Posts: 348
  • Location: Louisiana
Re: MM Custom Sleeved Cables - Coming Soon
« Reply #152 on: Thu, 04 October 2012, 15:23:58 »
Looking good, MM.  I'll be down for a few cables later on.  Especically once you have the sleeving color/codes labeled.
| HHKB Pro 2 | Leopold FC660C
| Poker.PANDAclears | ErgoDox (62g Black)

Offline JonDBurnett

  • Posts: 53
  • Location: Palm Springs, California
Re: MM Custom Sleeved Cables - Coming Soon
« Reply #153 on: Thu, 04 October 2012, 16:46:50 »
yaaaay i see mine in there :D
Filco MJ2 TKL | HHKB Type-S w/ MX Sliders

Offline tjcaustin

  • King Klaxon
  • * Moderator
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: MM Custom Sleeved Cables - Coming Soon
« Reply #154 on: Thu, 04 October 2012, 16:54:20 »
I don't see the one I ordered last night in there!!  RAH CANCEL MY ORDER

/other angry noises

Offline esoomenona

  • Gnillort?
  • Posts: 5323
.
« Reply #155 on: Thu, 04 October 2012, 16:56:26 »
.
« Last Edit: Wed, 15 October 2014, 18:49:20 by esoomenona »

Offline mistakemistake

  • Global Loveinator
  • Thread Starter
  • Posts: 373
Re: MM Custom Sleeved Cables - Coming Soon
« Reply #156 on: Thu, 04 October 2012, 16:57:11 »
I don't see the one I ordered last night in there!!  RAH CANCEL MY ORDER

/other angry noises

Aw ;(( Parts are on the way!

Offline peachesenregalia

  • Posts: 48
  • Location: Central New York
Re: MM Custom Sleeved Cables - Coming Soon
« Reply #157 on: Thu, 04 October 2012, 17:08:50 »
Lookin' good, man! Good job with these.
Good feeling of oneness.

Offline mistakemistake

  • Global Loveinator
  • Thread Starter
  • Posts: 373
Re: MM Custom Sleeved Cables - Coming Soon
« Reply #158 on: Thu, 04 October 2012, 17:29:48 »
Added below to the Original Post.

The live order form will have new pictures with labels this weekend.
Also, I am going to start a 'Ready to Buy' Cables order form
Added these two to RTB:



Offline esoomenona

  • Gnillort?
  • Posts: 5323
.
« Reply #159 on: Thu, 04 October 2012, 17:31:22 »
.
« Last Edit: Sat, 18 October 2014, 21:46:05 by esoomenona »

Offline mistakemistake

  • Global Loveinator
  • Thread Starter
  • Posts: 373
Re: MM Custom Sleeved Cables - Coming Soon
« Reply #160 on: Thu, 04 October 2012, 17:33:45 »
^It does look a little peachy. But it's just standard orange. If you're looking for a bright orange, I would have to get a neon orange.

Offline esoomenona

  • Gnillort?
  • Posts: 5323
.
« Reply #161 on: Thu, 04 October 2012, 17:35:09 »
.
« Last Edit: Sat, 18 October 2014, 21:45:57 by esoomenona »

Offline TheProfosist

  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Re: MM Custom Sleeved Cables - Coming Soon
« Reply #162 on: Thu, 04 October 2012, 17:40:59 »
PM sent about some questions

Offline DarkShot

  • Posts: 201
  • Location: Canada
  • Professional Procrastinator
Re: MM Custom Sleeved Cables - Coming Soon
« Reply #163 on: Thu, 04 October 2012, 17:52:47 »
That stainless one looks fantastic. Damn!

Offline tjcaustin

  • King Klaxon
  • * Moderator
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: MM Custom Sleeved Cables - Coming Soon
« Reply #164 on: Thu, 04 October 2012, 19:16:31 »
I like that green.

Offline mistakemistake

  • Global Loveinator
  • Thread Starter
  • Posts: 373
Re: MM Custom Sleeved Cables - Coming Soon
« Reply #165 on: Thu, 04 October 2012, 19:18:23 »
Get it! :D
« Last Edit: Thu, 04 October 2012, 20:09:58 by mistakemistake »

Offline wiredPANDA

  • Posts: 348
  • Location: Louisiana
MM Custom Sleeved Cables - Coming Soon
« Reply #166 on: Thu, 04 October 2012, 20:27:54 »
^It does look a little peachy. But it's just standard orange. If you're looking for a bright orange, I would have to get a neon orange.

Happen to have any samples/pics of the neon orange heat shrink?

Or a vendor site that sources it?
| HHKB Pro 2 | Leopold FC660C
| Poker.PANDAclears | ErgoDox (62g Black)

Offline mistakemistake

  • Global Loveinator
  • Thread Starter
  • Posts: 373
Re: MM Custom Sleeved Cables - Coming Soon
« Reply #167 on: Thu, 04 October 2012, 20:33:00 »
^ I do not have any samples, but I would get it from frozencpu

Offline WhiteRice

  • Posts: 850
Re: MM Custom Sleeved Cables - Coming Soon
« Reply #168 on: Thu, 04 October 2012, 20:54:08 »
I just got my shipping confirmation. Thank you MM!

Offline mistakemistake

  • Global Loveinator
  • Thread Starter
  • Posts: 373
Re: MM Custom Sleeved Cables - Coming Soon
« Reply #169 on: Thu, 04 October 2012, 20:55:17 »
No problem! I'll get them to the post office before around 10am tomorrow morning EST.

Cheers!

Offline esoomenona

  • Gnillort?
  • Posts: 5323
.
« Reply #170 on: Thu, 04 October 2012, 21:00:26 »
.
« Last Edit: Sat, 18 October 2014, 21:43:29 by esoomenona »

Offline mistakemistake

  • Global Loveinator
  • Thread Starter
  • Posts: 373
Re: MM Custom Sleeved Cables - Coming Soon
« Reply #171 on: Thu, 04 October 2012, 21:02:09 »
 :D Thanks

Offline Elrick

  • Hype Master
  • Posts: 4895
  • Location: CrapTown, Convict Settlement
  • Keyboard Orgasmist
Re: MM Custom Sleeved Cables - Coming Soon
« Reply #172 on: Thu, 04 October 2012, 22:11:07 »
I like MiMiC Cables. Nice name.

Indeed........good to know you now have a trade name on here.

You should also draw up a small logo to place on your cables, just to give that unique exclusivity of ownership/branding for your work.


Offline Sinzz

  • Posts: 168
  • Location: Pasadena
Re: MM Custom Sleeved Cables - Coming Soon
« Reply #173 on: Fri, 05 October 2012, 00:54:56 »
hmmm after really thinking about it, my keyboard cant even fit a flat wire into the nook. well then, guess I shall purchase me a wire soon.
Keycool 84 MX Blue | Pure Pro | HHKB Pro 2

Offline Capitalistix

  • Posts: 162
  • Location: Florida
  • Cherry MX Green Disciple
    • Uncanny Electronics
Re: MM Custom Sleeved Cables - Coming Soon
« Reply #174 on: Fri, 05 October 2012, 16:15:58 »
These are insanely awesome and I will be ordering one or two from you very soon! Excellent looking craftmanship, damn.


Offline TheProfosist

  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Re: MM Custom Sleeved Cables - Coming Soon
« Reply #175 on: Sat, 06 October 2012, 15:37:27 »
do you think you could do a Filco cable? i realise I meay have to send you the cable.

Offline mistakemistake

  • Global Loveinator
  • Thread Starter
  • Posts: 373
Re: MM Custom Sleeved Cables - Coming Soon
« Reply #176 on: Sat, 06 October 2012, 18:32:18 »
I am working on a two piece cable. I'm pretty excited and will probably post pictures mid next week.

Offline TheProfosist

  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Re: MM Custom Sleeved Cables - Coming Soon
« Reply #177 on: Sat, 06 October 2012, 18:34:43 »
I am working on a two piece cable. I'm pretty excited and will probably post pictures mid next week.
two piece cable? for filco? That would be pretty much amazing my Phantom use the same case would this allow the cable to be detachable? If so please hold off on 2 of my cables id be interested in a 2 piece cable for them.

Offline tjcaustin

  • King Klaxon
  • * Moderator
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: MM Custom Sleeved Cables - Coming Soon
« Reply #178 on: Sat, 06 October 2012, 18:45:16 »
I already ordered a blue cable, but now I want a superhero or orange one.

Offline mistakemistake

  • Global Loveinator
  • Thread Starter
  • Posts: 373
Re: MM Custom Sleeved Cables - Coming Soon
« Reply #179 on: Sat, 06 October 2012, 20:24:48 »
I already ordered a blue cable, but now I want a superhero or orange one.

Sent you a PM :)

Offline mistakemistake

  • Global Loveinator
  • Thread Starter
  • Posts: 373
Re: MiMiC Cables **Custom Sleeved Cables**
« Reply #180 on: Sun, 07 October 2012, 22:53:23 »
OP Updated :)

Offline boost

  • BOSTMOBILE
  • * Elevated Elder
  • Posts: 3300
  • NY Giants!!!
Re: MiMiC Cables **Custom Sleeved Cables**
« Reply #181 on: Sun, 07 October 2012, 22:59:42 »
Looking forward to seeing pics of finished cables.
GL SIR!!!
"Aerodynamics are for people who can't build engines."

-Enzo Ferrari

Offline SmallFry

  • ** Moderator Emeritus
  • Posts: 3887
  • Location: Wisconsin, USA
  • Leaving 6/15; returning 6/22 or so.
Re: MiMiC Cables **Custom Sleeved Cables**
« Reply #182 on: Sun, 07 October 2012, 23:02:48 »
I like the new OP! Too poor to order a cable, so eventually I'll make my own!

Offline mistakemistake

  • Global Loveinator
  • Thread Starter
  • Posts: 373
Re: MiMiC Cables **Custom Sleeved Cables**
« Reply #183 on: Sun, 07 October 2012, 23:04:53 »
Aw, well stay tuned for giveaways! Also, I hope within the next two weeks I'll be able to offer a DIY kit as requested.

Offline SmallFry

  • ** Moderator Emeritus
  • Posts: 3887
  • Location: Wisconsin, USA
  • Leaving 6/15; returning 6/22 or so.
Re: MiMiC Cables **Custom Sleeved Cables**
« Reply #184 on: Sun, 07 October 2012, 23:06:15 »
Ooh! The one thing I requested and the other I dreamed (not really)! Thanks for the heads up!

Offline wiredPANDA

  • Posts: 348
  • Location: Louisiana
Re: MiMiC Cables **Custom Sleeved Cables**
« Reply #185 on: Mon, 08 October 2012, 00:39:48 »
Very nice update, MM.
| HHKB Pro 2 | Leopold FC660C
| Poker.PANDAclears | ErgoDox (62g Black)

Offline TheProfosist

  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Re: MiMiC Cables **Custom Sleeved Cables**
« Reply #186 on: Mon, 08 October 2012, 00:52:27 »
I like the op as well did a great job making it easier for others to pic out their cables. O and btw aramid armour FTW!

Offline danielucf

  • Horrible Mailman
  • * Elevated Elder
  • Posts: 2479
  • Location: Orlando
  • Hmmmm beer.
Re: MiMiC Cables **Custom Sleeved Cables**
« Reply #187 on: Mon, 08 October 2012, 11:42:04 »
Looking good, very excited for DIY cable, and will order a regular cable in the future.
VE.A 67g Zealios | GH60 MX Clears |

Offline Sifo

  • Alter
  • * Exquisite Elder
  • Posts: 7487
  • Location: #GOLDSPRINGS, #LEGITBALLIN
  • Illustrious
Re: MiMiC Cables **Custom Sleeved Cables**
« Reply #188 on: Mon, 08 October 2012, 13:24:10 »
How's the Filco coming along?
I love Elzy

Offline mistakemistake

  • Global Loveinator
  • Thread Starter
  • Posts: 373
Re: MiMiC Cables **Custom Sleeved Cables**
« Reply #189 on: Mon, 08 October 2012, 13:34:16 »
I should have a demo on my poker (will remove the pcb usb and solder straight to the board) by Wednesday. Just waiting on a few parts.

Offline Sifo

  • Alter
  • * Exquisite Elder
  • Posts: 7487
  • Location: #GOLDSPRINGS, #LEGITBALLIN
  • Illustrious
Re: MiMiC Cables **Custom Sleeved Cables**
« Reply #190 on: Mon, 08 October 2012, 13:42:51 »
Cool, sounds good, can't wait!
I love Elzy

Offline ekw808

  • ** Moderator Emeritus
  • Posts: 1115
  • Location: The 3C Treehouse
  • Ekw
Re: MiMiC Cables **Custom Sleeved Cables**
« Reply #191 on: Mon, 08 October 2012, 14:05:50 »
so you can make flat cables as well?! if you can make something similar to
Show Image
then you sir, have an order from me like...yesterday!

Very much interested in one of these cables as well, I'd buy a couple if they were under 15.
[One Keyboard at a time]

My Heatware Please comment, and I will do the same =D 

Offline mistakemistake

  • Global Loveinator
  • Thread Starter
  • Posts: 373
Re: MiMiC Cables **Custom Sleeved Cables**
« Reply #192 on: Mon, 08 October 2012, 14:11:58 »
I am working on getting flat ribbon wire right now to make the flat sleeved USB cables. As for price I'm not sure if I can get down to that price with all of the materials used  :/

Offline Glissant

  • Posts: 1976
  • Location: Oslo, Norway
Re: MiMiC Cables **Custom Sleeved Cables**
« Reply #193 on: Mon, 08 October 2012, 14:24:27 »
Oh oh oh flat cable. So very interested in that. Not those colors though xD.

Offline ekw808

  • ** Moderator Emeritus
  • Posts: 1115
  • Location: The 3C Treehouse
  • Ekw
Re: MiMiC Cables **Custom Sleeved Cables**
« Reply #194 on: Mon, 08 October 2012, 14:27:19 »
I was reading up on those LaCie cables in the picture, and while they were only 10-12 dollars each, but the quality was not 100% there, so as long as the price is backed by the quality I would definitely consider purchasing one from you, I would also like to think these are 6ft as well? would they be cheaper if smaller?
[One Keyboard at a time]

My Heatware Please comment, and I will do the same =D 

Offline mistakemistake

  • Global Loveinator
  • Thread Starter
  • Posts: 373
Re: MiMiC Cables **Custom Sleeved Cables**
« Reply #195 on: Mon, 08 October 2012, 14:34:25 »
I was reading up on those LaCie cables in the picture, and while they were only 10-12 dollars each, but the quality was not 100% there, so as long as the price is backed by the quality I would definitely consider purchasing one from you, I would also like to think these are 6ft as well? would they be cheaper if smaller?

As for quality I definitely use higher quality parts from the bulk cable itself to the connectors. As for quality of work, I can post a few pictures of the basic tinning of wires and soldering to connectors if you'd like.

Since the flat cables require a flat ribbon cable instead of bulk wire, I can't promise a price quite yet. Sleeving for the flat cables will be from MDPC and limited to those colors only. Lead time for the flat cables may be a little longer since they're coming from overseas.

« Last Edit: Mon, 08 October 2012, 14:55:46 by mistakemistake »

Offline mistakemistake

  • Global Loveinator
  • Thread Starter
  • Posts: 373
Re: MiMiC Cables **Custom Sleeved Cables**
« Reply #196 on: Mon, 08 October 2012, 14:38:43 »
If people are interested in seeing..





Offline TheProfosist

  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Re: MiMiC Cables **Custom Sleeved Cables**
« Reply #197 on: Mon, 08 October 2012, 17:43:05 »
id need to order a smaller tip for my soldering iron if i did stuff that small regularly.

Offline esoomenona

  • Gnillort?
  • Posts: 5323
.
« Reply #198 on: Mon, 08 October 2012, 17:45:25 »
.
« Last Edit: Fri, 31 October 2014, 09:40:33 by esoomenona »

Offline TheProfosist

  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Re: MiMiC Cables **Custom Sleeved Cables**
« Reply #199 on: Mon, 08 October 2012, 18:09:51 »
Hey, Profosist. I see you around often (I assume a lot of people do with over 3000 posts). I always see your custom title, and it irks me just a bit... I'm not sure if it's intentional, but shouldn't there be an S in there somewhere?
possibly lol i wonder how long its been that way i thought you were going to say something else about non standard layouts