Post by: elton5354 on Sun, 10 January 2016, 21:33:43
(http://i.imgur.com/EjSDmGq.jpg)
(http://i.imgur.com/1RDasyV.jpg)
ORDER HERE (https://docs.google.com/forms/d/1lPWhNJ0LhFTc7DKwcX3j1IipL1GPmypOOgE9PBlRdIc/viewform) <---- Click here to order
Included in this set:
Aluminium top housing (Aluminum 6061) in black, silver, blue-gray, or red
Bottom housing (flat acrylic, angled acrylic, or aluminum bottom)
MX Reinforcement Plate (stainless steel or aluminum)
PCB presoldered (resistors, diodes, smd leds, etc, but not switches)
Fixing bolts and rubber pads
Info:
Limit of 30 sets for first round. If over, will take more time for the later orders.
Case has an angle of 11 degrees for the aluminum bottom, 7 degrees for angled acrylic, and 9 degrees for flat acrylic piece with feet.
Full keymapping
Macro settings
Supports MX switches
Full LED and RGB SMD LED compatible.
Switches and stabilizers are not included (Requires Cherry PCB stabilizers)
Supports centred caps lock or stepped caps lock.
You must buy a complete set (Top housing, bottom housing, and PCB + Plate) in order to buy the optional add-ons.
More information and pictures on this :
More
http://duck0113.tistory.com/127
http://duck0113.tistory.com/126
http://duck0113.tistory.com/125
http://duck0113.tistory.com/126
http://duck0113.tistory.com/125
Price:
(http://i.imgur.com/cPs89cB.png)
(http://i.imgur.com/eeCJIs5.png)
(http://i.imgur.com/v1AC3Oq.png)
Optional Add-Ons:
MX PCB + Plate - $72 USD
DUCK Feets - $45 USD per set (2 feet) - works only with flat acrylic bottoms
Shipping
Shipping will be from South Korea with EMS. Shipping cost will depend on your location. Each set weighs about (TBD) kg with packaging. Click here to check your zone (https://geekhack.org/index.php?topic=53348.msg1191127#msg1191127) and Click here to check their prices in Korean Won (http://www.koreapost.go.kr/eng/sub/subpage.jsp?contId=e1020300)
Notes
- Deadline for order is February 1, 2016.
- Order ONLY if you can pay the invoice by the deadline (February 7, 2016)
- There will be no extras for sale after this group buy is closed, so please put your order in before it's too late ;)
- I will send invoices through Paypal to everyone, so you need a verified Paypal account to receive and pay. Also please check the information carefully before submitting your order. There will be Paypal fees added to the price.
- If you want to make changes to your order, please send me a PM.
- I can only guarantee damages for 7 days from the day you receive the items.
ORDER HERE (https://docs.google.com/forms/d/1lPWhNJ0LhFTc7DKwcX3j1IipL1GPmypOOgE9PBlRdIc/viewform) <---- Click here to order
Check your order here: (I update this manually)
https://docs.google.com/spreadsheets/d/19enJgC0uMUPcQd_qNDn1UH7A2x2IJJie3UGb4l3U7MU/pubhtml?gid=1358261006&single=true
Post by: MrRooks on Mon, 11 January 2016, 15:01:15
Post by: MrChunky on Mon, 11 January 2016, 15:02:22
Post by: duckness on Mon, 11 January 2016, 15:03:11
Ordered.
Post by: jshane on Mon, 11 January 2016, 15:07:05
Post by: Dreamre on Mon, 11 January 2016, 15:13:29
Post by: nickheller on Mon, 11 January 2016, 15:17:19
Post by: ika on Mon, 11 January 2016, 15:19:32
EDIT: is there a window to modify our order if we get in the initial 30?
Post by: Butter on Mon, 11 January 2016, 15:20:10
Post by: heedpantsnow on Mon, 11 January 2016, 15:23:01
Post by: xondat on Mon, 11 January 2016, 15:23:12
Post by: 64rky on Mon, 11 January 2016, 15:24:04
Post by: filphil on Mon, 11 January 2016, 15:30:12
Post by: popkorn62 on Mon, 11 January 2016, 15:30:29
Post by: iamtootallforthis on Mon, 11 January 2016, 15:31:55
Post by: Bromono on Mon, 11 January 2016, 15:32:35
Too bad I'm broke.
I feels you
Post by: madhias on Mon, 11 January 2016, 15:33:01
Too bad I'm broke.
Yes, broke too
Post by: MrRooks on Mon, 11 January 2016, 15:47:22
Ordered! I hope I don't need to move for the 12 months.
I'm moving in June, I'm hoping it can be kept straight.
Post by: Arvid on Mon, 11 January 2016, 15:52:12
Post by: Dreamre on Mon, 11 January 2016, 15:54:07
So this does only have ANSI support right?
Take a look at the picture, it looks like there's ISO support.
Post by: HannahPeach on Mon, 11 January 2016, 15:56:02
*edit: I am an idiot.
Post by: MrRooks on Mon, 11 January 2016, 15:57:03
Can we actually order two types of bottom parts? :s
Yeah the form has a section for extra bottoms
Post by: KetchyKech on Mon, 11 January 2016, 15:58:38
but i think i made it!! (wooo) I am beyond hype, ive been waiting for this :thumb: :p
edit: PM Sent* ! sorry about that!
Post by: Arvid on Mon, 11 January 2016, 16:02:49
Don't think so the left shift seems to only be 2.25 and not 1.25 + 1:/So this does only have ANSI support right?
Take a look at the picture, it looks like there's ISO support.
or did I miss something?
Post by: mrboovn on Mon, 11 January 2016, 16:45:15
Post by: roostrc0gburn on Mon, 11 January 2016, 16:50:40
Post by: havenlau on Mon, 11 January 2016, 16:57:06
can't choose between them and acrylic bottom :confused: :confused: :confused:
Post by: Pemdas on Mon, 11 January 2016, 17:19:41
Thanks again Elton :thumb:
Post by: HannahPeach on Mon, 11 January 2016, 17:44:25
duck feet tho!
can't choose between them and acrylic bottom :confused: :confused: :confused:
You can pick both, can you?
Post by: 64rky on Mon, 11 January 2016, 18:05:57
- How/wen do we find out if we have made it into the first 30?
- How long does this GB usually take to get the bits to you? I totally get group buys, and I know they can take months and months, but just trying to get a ball park of 6 months, 12 months, etc...
Thanks fo yo help :)
Post by: elton5354 on Mon, 11 January 2016, 18:12:20
I was told 2 months estimated time of shipping, but that was what I was told for Orion, so just FYI.
I'll post a public sheet soon for everyone to see their orders.
Post by: breitling on Mon, 11 January 2016, 18:24:04
I was told 2 months estimated time of shipping, but that was what I was told for Orion, so just FYI.
I wasn't around for the Orion, did that one take a long time? Very stoked for this one.
Post by: GL1TCH3D on Mon, 11 January 2016, 18:24:42
Hopefully I get in on this one because I missed out on the Orion and have been wanting another 75% lately
Post by: HannahPeach on Mon, 11 January 2016, 18:35:54
Places! Accidentally put in for 2 sets of Duck feet but it's fine in the end =3
Hopefully I get in on this one because I missed out on the Orion and have been wanting another 75% lately
Hee I did the same mistake! Thought to myself: well just run with it, life's short
edit: nooo you're 33 :(
Post by: elton5354 on Mon, 11 January 2016, 18:38:28
Check your orders here
Post by: T0mb3ry on Mon, 11 January 2016, 18:44:26
Post by: GL1TCH3D on Mon, 11 January 2016, 18:46:58
Places! Accidentally put in for 2 sets of Duck feet but it's fine in the end =3
Hopefully I get in on this one because I missed out on the Orion and have been wanting another 75% lately
Hee I did the same mistake! Thought to myself: well just run with it, life's short
edit: nooo you're 33 :(
FML missed R1 and now R2
Elton I don't mind waiting longer for my set if it means I can get one!
Post by: kenshinjeff on Mon, 11 January 2016, 18:59:21
Post by: FranksNewLiver on Mon, 11 January 2016, 19:04:41
Post by: FoC_Tow on Mon, 11 January 2016, 19:07:05
Missed the first 30! D:
Just filled the form, but same here! O=
Is 30 the order limit, or will 30 just be the first badge?
Also what about those polycarbonate switch plates?
Im guessing prototypes and not available for order? xD
Post by: raymogi on Mon, 11 January 2016, 19:13:03
Post by: gnarlsagan on Mon, 11 January 2016, 19:18:50
What are the pros/cons of the aluminum vs steel plate?
Post by: joostflux on Mon, 11 January 2016, 19:20:48
Post by: 64rky on Mon, 11 January 2016, 19:27:01
https://docs.google.com/spreadsheets/d/19enJgC0uMUPcQd_qNDn1UH7A2x2IJJie3UGb4l3U7MU/pubhtml?gid=1358261006&single=true
Check your orders here
Booooo... I am 31, looks like I'll be waiting a while :(
Post by: popkorn62 on Mon, 11 January 2016, 19:32:22
Post by: FranksNewLiver on Mon, 11 January 2016, 19:34:43
Post by: jshane on Mon, 11 January 2016, 19:39:32
Is that something that comes with the duck feet or is the acrylic bottom the only flat bottom available?
Post by: 64rky on Mon, 11 January 2016, 19:45:59
Is that one person getting three...
Yea, arguably that's one order :)
Post by: mrboovn on Mon, 11 January 2016, 19:51:09
Post by: GL1TCH3D on Mon, 11 January 2016, 19:53:01
Post by: Dreamre on Mon, 11 January 2016, 20:06:35
Is that one person getting three...
Yea, arguably that's one order :)
One for the girlfriend and two for myself ;).
Post by: GL1TCH3D on Mon, 11 January 2016, 20:08:06
Is that one person getting three...
Yea, arguably that's one order :)
One for the girlfriend and two for myself ;).
You mean one for gl1tch3d your Canadian brethren right?
Post by: Pemdas on Mon, 11 January 2016, 20:15:24
I was told 2 months estimated time of shipping, but that was what I was told for Orion, so just FYI.
I wasn't around for the Orion, did that one take a long time? Very stoked for this one.
For time reference took me about 8 months for me to get my Orion and I was in the first 30 batch too :p
#26 this time!
Missed V1... Missed Orion V2... Now missing Octagon V2 T.T
I don't think you're missing it completely though, just the first round of 30. For the Orion the first 30 people (minus a couple due to the acrylic bottom problems) got it ~2 months before the rest shipped out.
Post by: tuco on Mon, 11 January 2016, 20:16:26
Post by: FrostyToast on Mon, 11 January 2016, 20:17:44
Is that one person getting three...
Yea, arguably that's one order :)
One for the girlfriend and two for myself ;).
You mean one for gl1tch3d your Canadian brethren right?
I doubt he is buying two of the same board.
He must have 2 girlfriends.
Post by: kivx on Mon, 11 January 2016, 20:23:31
Post by: FranksNewLiver on Mon, 11 January 2016, 20:26:34
Is that one person getting three...
Yea, arguably that's one order :)
One for the girlfriend and two for myself ;).
You mean one for gl1tch3d your Canadian brethren right?
I doubt he is buying two of the same board.
He must have 2 girlfriends.
Oh god, and I thought keyboards were an expensive hobby.
Post by: FrostyToast on Mon, 11 January 2016, 20:28:59
Is that one person getting three...
Yea, arguably that's one order :)
One for the girlfriend and two for myself ;).
You mean one for gl1tch3d your Canadian brethren right?
I doubt he is buying two of the same board.
He must have 2 girlfriends.
Oh god, and I thought keyboards were an expensive hobby.
Speaking of expensive, I hear that Elton always goes for the high maintenance girls.
Post by: GL1TCH3D on Mon, 11 January 2016, 20:29:33
Is that one person getting three...
Yea, arguably that's one order :)
One for the girlfriend and two for myself ;).
You mean one for gl1tch3d your Canadian brethren right?
I doubt he is buying two of the same board.
He must have 2 girlfriends.
Oh god, and I thought keyboards were an expensive hobby.
Tea is the cheapest hobby I participate in with audio / photography being on the upper end.
I remember when I sold my W3000anv when I first started keyboarding and got a ton of stuff with that money.
However having a girlfriend is easily the most expensive hobby...
Post by: 64rky on Mon, 11 January 2016, 20:38:04
Is that one person getting three...
Yea, arguably that's one order :)
One for the girlfriend and two for myself ;).
:( hopefully I land up getting in on this, been after one of these for a while, oh well... Ordered as soon as I got home, meh... I am sure this is the god's ways of telling me to calm my weird keyboard hobby down :)
Post by: FranksNewLiver on Mon, 11 January 2016, 20:42:24
Genuinely curious, how is tea a hobby? Am I missing out on something wonderful because I've been a coffee drinker all my life?Is that one person getting three...
Yea, arguably that's one order :)
One for the girlfriend and two for myself ;).
You mean one for gl1tch3d your Canadian brethren right?
I doubt he is buying two of the same board.
He must have 2 girlfriends.
Oh god, and I thought keyboards were an expensive hobby.
Tea is the cheapest hobby I participate in with audio / photography being on the upper end.
I remember when I sold my W3000anv when I first started keyboarding and got a ton of stuff with that money.
However having a girlfriend is easily the most expensive hobby...
Post by: hcwt on Mon, 11 January 2016, 20:44:30
Post by: GL1TCH3D on Mon, 11 January 2016, 20:46:15
Genuinely curious, how is tea a hobby? Am I missing out on something wonderful because I've been a coffee drinker all my life?Is that one person getting three...
Yea, arguably that's one order :)
One for the girlfriend and two for myself ;).
You mean one for gl1tch3d your Canadian brethren right?
I doubt he is buying two of the same board.
He must have 2 girlfriends.
Oh god, and I thought keyboards were an expensive hobby.
Tea is the cheapest hobby I participate in with audio / photography being on the upper end.
I remember when I sold my W3000anv when I first started keyboarding and got a ton of stuff with that money.
However having a girlfriend is easily the most expensive hobby...
You have different grades of tea as well as styles of preparation and just collecting and using teaware.
For example a decent yixing clay teapot will run about $100 and the more hardcore enthusiasts will have 1 for each type of tea they drink due to how it "absorbs" flavor.
Obviously the grades of tea are like getting better coffee beans, better wine, etc.
Then the preparation styles are different for Japanese teas, Chinese, etc.
I wouldn't consider the person that just buys a few boxes of tea a hobbyist though =P
Post by: FrostyToast on Mon, 11 January 2016, 20:46:53
Genuinely curious, how is tea a hobby? Am I missing out on something wonderful because I've been a coffee drinker all my life?
Either tea or coffee can be someone's hobby.
People will develop knowledge of what makes either one taste good through: technique, ingredients, subjectivity
A coffee drinker isn't automatically a coffee hobbyist, just like a keyboard user isn't automatically a keyboard hobbyist; it's all about the enthusiasm to delve deeper and gain knowledge on the subject.
Post by: kelbear on Mon, 11 January 2016, 20:50:52
You mean one for gl1tch3d your Canadian brethren right?
No, for me :)
Post by: cirrus82 on Mon, 11 January 2016, 21:09:50
Post by: FranksNewLiver on Mon, 11 January 2016, 21:14:47
Genuinely curious, how is tea a hobby? Am I missing out on something wonderful because I've been a coffee drinker all my life?Is that one person getting three...
Yea, arguably that's one order :)
One for the girlfriend and two for myself ;).
You mean one for gl1tch3d your Canadian brethren right?
I doubt he is buying two of the same board.
He must have 2 girlfriends.
Oh god, and I thought keyboards were an expensive hobby.
Tea is the cheapest hobby I participate in with audio / photography being on the upper end.
I remember when I sold my W3000anv when I first started keyboarding and got a ton of stuff with that money.
However having a girlfriend is easily the most expensive hobby...
You have different grades of tea as well as styles of preparation and just collecting and using teaware.
For example a decent yixing clay teapot will run about $100 and the more hardcore enthusiasts will have 1 for each type of tea they drink due to how it "absorbs" flavor.
Obviously the grades of tea are like getting better coffee beans, better wine, etc.
Then the preparation styles are different for Japanese teas, Chinese, etc.
I wouldn't consider the person that just buys a few boxes of tea a hobbyist though =P
Cool, sounds like a hobby that has the added benefit of looking nice when not using it. It'll be hard to drag me away from my chemex though :p
Post by: pmh1410 on Mon, 11 January 2016, 21:19:35
Post by: ryptide11 on Mon, 11 January 2016, 21:20:27
Post by: cirrus82 on Mon, 11 January 2016, 21:29:36
Post by: adamski07 on Mon, 11 January 2016, 21:45:13
Post by: romevi on Mon, 11 January 2016, 21:50:41
Just ordered three of these. I'm numb from the joy and pain.
That's a little...bogus. But I guess there's no limit. :mad:
Post by: whentheclouds on Mon, 11 January 2016, 21:59:09
Can anyone tell me if the Acrylic Flat Bottom contains the feet?the feet are designed for the flat bottom, but are sold separately
Post by: romevi on Mon, 11 January 2016, 22:02:48
However having a girlfriend is easily the most expensive hobby...
Nope. Having children is. Not only do they suck the money out of your wallet, but they suck the energy from your mind and eyes too.
Post by: HannahPeach on Mon, 11 January 2016, 22:05:07
However having a girlfriend is easily the most expensive hobby...
Nope. Having children is. Not only do they suck the money out of your wallet, but they suck the energy from your mind and eyes too.
It all pays off on christmas day, the happy those kids can be over small things is unreal actually.
Can anyone tell me if the Acrylic Flat Bottom contains the feet?the feet are designed for the flat bottom, but are sold separately
The flat bottom always includes the more standard feet though, if I am not mistaken.
Post by: adamski07 on Mon, 11 January 2016, 22:09:45
Can anyone tell me if the Acrylic Flat Bottom contains the feet?It comes with the chrome feet, but you can also get the duck feet if you don't like the stock one.
Post by: whentheclouds on Mon, 11 January 2016, 22:16:13
It comes with the chrome feet, but you can also get the duck feet if you don't like the stock one.i didn't check the order form till now, you're right
do we have comparison photos of the feet?
Post by: adamski07 on Mon, 11 January 2016, 22:27:23
It comes with the chrome feet, but you can also get the duck feet if you don't like the stock one.i didn't check the order form till now, you're right
do we have comparison photos of the feet?
http://duck0113.tistory.com/127
http://duck0113.tistory.com/126
http://duck0113.tistory.com/125
Post by: tom.smykowski on Mon, 11 January 2016, 22:37:42
Post by: whentheclouds on Mon, 11 January 2016, 22:58:16
http://duck0113.tistory.com/125oh that's what they are. i saw them before but since they were on a different board i didn't make the connection. thanks again
omg... I can't believe it went so quickly. Does anyone have any idea how many would be fulfilled beyond the first 30?last time it was 30+30
Post by: tuco on Mon, 11 January 2016, 23:02:42
last time it was 30+30
That is good to know, didn't get in the first 30, but got in the next.
Post by: calavera on Mon, 11 January 2016, 23:17:09
I missed the Korean GB so I'm joining this one.
Post by: duckness on Mon, 11 January 2016, 23:34:42
Post by: ika on Mon, 11 January 2016, 23:39:06
Anyone know if there's any difference between the Aluminium and Steel plates?
They're made of different metals?
Post by: joostflux on Mon, 11 January 2016, 23:42:00
Anyone know if there's any difference between the Aluminium and Steel plates?
I would also like to know this. I'm more curious about why I should pick one over the other. My thinking is that the plate is to reduce flex but I highly doubt with this amazing aluminum case we are going to need to worry about too much flex. But why would one pick steel over aluminum?
Post by: ika on Mon, 11 January 2016, 23:43:37
Post by: tuba section on Mon, 11 January 2016, 23:44:54
Post by: lanyusea on Tue, 12 January 2016, 00:26:47
not quite clear about the PCB image, wondering if it supports HHKB layout?
i.e. split the backspace key and the right shift key.
Post by: Steezus on Tue, 12 January 2016, 01:35:46
a layout question:
not quite clear about the PCB image, wondering if it supports HHKB layout?
i.e. split the backspace key and the right shift key.
There is no split spacebar and the right shift is already shortened due to the arrow keys.
Post by: darkclone24 on Tue, 12 January 2016, 01:56:42
Post by: lanyusea on Tue, 12 January 2016, 02:24:30
a layout question:
not quite clear about the PCB image, wondering if it supports HHKB layout?
i.e. split the backspace key and the right shift key.
There is no split spacebar and the right shift is already shortened due to the arrow keys.
while.. I mean backspace
Post by: E3E on Tue, 12 January 2016, 02:45:13
Post by: Sifo on Tue, 12 January 2016, 02:45:27
a layout question:
not quite clear about the PCB image, wondering if it supports HHKB layout?
i.e. split the backspace key and the right shift key.
There is no split spacebar and the right shift is already shortened due to the arrow keys.
while.. I mean backspace
Looking at the PCB image there is a split backspace.
Post by: E3E on Tue, 12 January 2016, 05:14:26
Yep, this'll work. No regrets. :D
Post by: bocahgundul on Tue, 12 January 2016, 05:39:32
Post by: E3E on Tue, 12 January 2016, 06:03:00
Too bad the this don't havu the alps option :'(
Indeed. Maybe in the future, and if not, I'm gonna have to take a drill to it and have someone make up a custom plate. If this had the plastic plate option the Orion had, then I could just modify the plate myself. I could even do it with aluminum, but I'd rather not have to endure doing all that by hand haha when it comes to aluminum.
Post by: bocahgundul on Tue, 12 January 2016, 06:14:31
Missed the orion v2 and I waited for the octagon and hoping that there will be an alps option an damn no option so I have to skip this GBToo bad the this don't havu the alps option :'(
Indeed. Maybe in the future, and if not, I'm gonna have to take a drill to it and have someone make up a custom plate. If this had the plastic plate option the Orion had, then I could just modify the plate myself. I could even do it with aluminum, but I'd rather not have to endure doing all that by hand haha when it comes to aluminum.
Post by: elton5354 on Tue, 12 January 2016, 06:17:34
I just updated the spreadsheet and there are over 70 orders. :O Much more than anticipated. Some are double orders, so I'm not sure if they're mistakes or not. Let me know....
Post by: darkclone24 on Tue, 12 January 2016, 07:00:03
I'll reply to everyone's PM when I have time at lunch or after work at home.
I just updated the spreadsheet and there are over 70 orders. :O Much more than anticipated. Some are double orders, so I'm not sure if they're mistakes or not. Let me know....
Any idea as to batch size after the first 30?
Post by: apolotary on Tue, 12 January 2016, 07:03:38
Does your top plate allow opening switches without desoldering?
And also:
Quote
MX PCB + Plate - $72 USD
Means ordering one more set of PCB+plate on top of original order?
And Micro-USB or Mini-USB?
Post by: MrRooks on Tue, 12 January 2016, 07:23:47
Hey sorry if this was answered earlier, but:It doesn't allow switch top removal. There are a bunch of bottom row options,look at the pics in the first post, one of them shows the bottom row configurations. Yeah that cost is for an extra plate and pcb on top of your order.
Does your top plate allow opening switches without desoldering?Is there only a winkeyless layout or I can have a winkey bottom row?found a winkey here (http://cfile4.uf.tistory.com/image/260D1C4D565929F51536CA)
And also:QuoteMX PCB + Plate - $72 USD
Means ordering one more set of PCB+plate on top of original order?
And Micro-USB or Mini-USB?
Post by: apolotary on Tue, 12 January 2016, 07:39:40
Hey sorry if this was answered earlier, but:It doesn't allow switch top removal. There are a bunch of bottom row options,look at the pics in the first post, one of them shows the bottom row configurations. Yeah that cost is for an extra plate and pcb on top of your order.
Does your top plate allow opening switches without desoldering?Is there only a winkeyless layout or I can have a winkey bottom row?found a winkey here (http://cfile4.uf.tistory.com/image/260D1C4D565929F51536CA)
And also:QuoteMX PCB + Plate - $72 USD
Means ordering one more set of PCB+plate on top of original order?
And Micro-USB or Mini-USB?
Thanks! I'll wait for the next iteration with removable switch tops then
Post by: E3E on Tue, 12 January 2016, 09:48:25
LOOKS LIKE I HAVE THE RARE FIRST EDITION RED MODEL AWW YE.
Silver was the least common color from v1. Then red, then black, then blue grey. Blue grey was the most popular color in the first Octagon GB.
5 Silver | 7 Red | 9 Black | 14 Blue Grey
Post by: Steezus on Tue, 12 January 2016, 11:15:38
The v2 is definitely going to dwarf the popularity of the v1. Hehe. It's going to be interesting to see this take off. Jeez. 72 and it hasn't even been up for a day yet. Crazy stuff. The first one only had like 27 orders and 35 individual boards sold.
LOOKS LIKE I HAVE THE RARE FIRST EDITION RED MODEL AWW YE.
Silver was the least common color from v1. Then red, then black, then blue grey. Blue grey was the most popular color in the first Octagon GB.
5 Silver | 7 Red | 9 Black | 14 Blue Grey
People shouldn't collect boards because of reality, that's the wrong attitude imo. Who cares how rare the board is, buy it to use it.
Post by: KetchyKech on Tue, 12 January 2016, 11:24:09
(been eyeing 75% keyboards for awhile now)
I wonder if the butterfly numpad will ever make another round :p !!! I sure hope so
Could definitely use that ;D
Post by: cirrus82 on Tue, 12 January 2016, 11:24:50
Ugh. Thank goodness I saw this late. My wallet is at a bit of an ease, for now.Just ordered three of these. I'm numb from the joy and pain.
That's a little...bogus. But I guess there's no limit. :mad:
75% is the best layout for me, needed one for work and home. Third is a special gift.
Post by: KetchyKech on Tue, 12 January 2016, 11:57:34
Is having a steel plate w/ tactile switches not an ideal circumstance? I know this kind of determination can get rather subjective, and I've read many opinions that advocate for the usage of tactiles on aluminum plates ("for the feel"), but it made me wonder if difference was really all that significant. Any input is appreciated!
Post by: Dreamre on Tue, 12 January 2016, 12:07:15
bah ~ i'm a little conflicted -- I lean towards tactile switches, but I do own boards w/ linear switches (and enjoy them as well)
Is having a steel plate w/ tactile switches not an ideal circumstance? I know this kind of determination can get rather subjective, and I've read many opinions that advocate for the usage of tactiles on aluminum plates ("for the feel"), but it made me wonder if difference was really all that significant. Any input is appreciated!
I picked aluminium as I find the stainless steel ones easier to scratch. The aluminium ones have a sandblasted finish while the steel ones have a brushed finish. I hope this helps!
Post by: KetchyKech on Tue, 12 January 2016, 12:15:37
bah ~ i'm a little conflicted -- I lean towards tactile switches, but I do own boards w/ linear switches (and enjoy them as well)
Is having a steel plate w/ tactile switches not an ideal circumstance? I know this kind of determination can get rather subjective, and I've read many opinions that advocate for the usage of tactiles on aluminum plates ("for the feel"), but it made me wonder if difference was really all that significant. Any input is appreciated!
I picked aluminium as I find the stainless steel ones easier to scratch. The aluminium ones have a sandblasted finish while the steel ones have a brushed finish. I hope this helps!
certainly a factor to consider, thank you! I simply chose steel plate because I selected the acrylic bottom and wanted to add some weight --it wasn't until later that I thought about how it would affect the feel of certain switch-types
Post by: 64rky on Tue, 12 January 2016, 12:27:41
bah ~ i'm a little conflicted -- I lean towards tactile switches, but I do own boards w/ linear switches (and enjoy them as well)
Is having a steel plate w/ tactile switches not an ideal circumstance? I know this kind of determination can get rather subjective, and I've read many opinions that advocate for the usage of tactiles on aluminum plates ("for the feel"), but it made me wonder if difference was really all that significant. Any input is appreciated!
I picked aluminium as I find the stainless steel ones easier to scratch. The aluminium ones have a sandblasted finish while the steel ones have a brushed finish. I hope this helps!
certainly a factor to consider, thank you! I simply chose steel plate because I selected the acrylic bottom and wanted to add some weight --it wasn't until later that I thought about how it would affect the feel of certain switch-types
I never thought of this, mainly because I'm a n00b. So how exactly does each plate type affect the feel? I ordered aluminum??
Post by: KetchyKech on Tue, 12 January 2016, 12:48:44
bah ~ i'm a little conflicted -- I lean towards tactile switches, but I do own boards w/ linear switches (and enjoy them as well)
Is having a steel plate w/ tactile switches not an ideal circumstance? I know this kind of determination can get rather subjective, and I've read many opinions that advocate for the usage of tactiles on aluminum plates ("for the feel"), but it made me wonder if difference was really all that significant. Any input is appreciated!
I picked aluminium as I find the stainless steel ones easier to scratch. The aluminium ones have a sandblasted finish while the steel ones have a brushed finish. I hope this helps!
certainly a factor to consider, thank you! I simply chose steel plate because I selected the acrylic bottom and wanted to add some weight --it wasn't until later that I thought about how it would affect the feel of certain switch-types
I never thought of this, mainly because I'm a n00b. So how exactly does each plate type affect the feel? I ordered aluminum??
i'll let those with personal knowledge of differences weigh in, as I can only comment based on what i've read --
but apparently:
tactile switches --> aluminum plate
linear switches --> steel plate
the reason I see the most pop up is that the rigidity of metals play a role in how it feels (e.g., how much flex you get if you bottom out) and there was some mention of how sounds resonate
:'( no clue though, it may be so minor that one may hardly notice
someone guide us! :-\
Post by: Steezus on Tue, 12 January 2016, 13:03:34
A steel plate has the least amount of flex to it, which is what you want for linear switches to have a fluid motion of each key press without any additional "feedback".
An aluminum plate gives a slight bit of flex to it, which is good for tactile switches to help make the tactility more pronounced. Aluminum tends to give the best sound in terms of tactile switches.
An acrylic plate gives a fair bit of flex, it is best in terms of tactility and also my favorite. I have an acrylic plate with 65g Purple Zealios for my Orion v2 and the typing experience is heavenly. The sound is very muted though with the acrylic plate but another benefit is the even distribution of backlight.
Post by: KetchyKech on Tue, 12 January 2016, 13:20:56
KetckhyKech you basically got the right idea. However I can guarantee you that the board itself will already weight a ton so opting for a steel plate just for the added weight isn't really a good idea.
A steel plate has the least amount of flex to it, which is what you want for linear switches to have a fluid motion of each key press without any additional "feedback".
An aluminum plate gives a slight bit of flex to it, which is good for tactile switches to help make the tactility more pronounced. Aluminum tends to give the best sound in terms of tactile switches.
An acrylic plate gives a fair bit of flex, it is best in terms of tactility and also my favorite. I have an acrylic plate with 65g Purple Zealios for my Orion v2 and the typing experience is heavenly. The sound is very muted though with the acrylic plate but another benefit is the even distribution of backlight.
Just what I was looking for, thank you kind sir! (your orion v2 sounds like a dream)
the reassurance on the weight put me at ease -- I'll have to decide if I want this to be a linear or tactile board after all :thumb:
Post by: MrRooks on Tue, 12 January 2016, 13:36:31
KetckhyKech you basically got the right idea. However I can guarantee you that the board itself will already weight a ton so opting for a steel plate just for the added weight isn't really a good idea.
A steel plate has the least amount of flex to it, which is what you want for linear switches to have a fluid motion of each key press without any additional "feedback".
An aluminum plate gives a slight bit of flex to it, which is good for tactile switches to help make the tactility more pronounced. Aluminum tends to give the best sound in terms of tactile switches.
An acrylic plate gives a fair bit of flex, it is best in terms of tactility and also my favorite. I have an acrylic plate with 65g Purple Zealios for my Orion v2 and the typing experience is heavenly. The sound is very muted though with the acrylic plate but another benefit is the even distribution of backlight.
Just what I was looking for, thank you kind sir! (your orion v2 sounds like a dream)
the reassurance on the weight put me at ease -- I'll have to decide if I want this to be a linear or tactile board after all :thumb:
Even then it's still preference. I use linear switches and prefer an aluminum plate over steel.
Post by: Steezus on Tue, 12 January 2016, 13:40:42
KetckhyKech you basically got the right idea. However I can guarantee you that the board itself will already weight a ton so opting for a steel plate just for the added weight isn't really a good idea.
A steel plate has the least amount of flex to it, which is what you want for linear switches to have a fluid motion of each key press without any additional "feedback".
An aluminum plate gives a slight bit of flex to it, which is good for tactile switches to help make the tactility more pronounced. Aluminum tends to give the best sound in terms of tactile switches.
An acrylic plate gives a fair bit of flex, it is best in terms of tactility and also my favorite. I have an acrylic plate with 65g Purple Zealios for my Orion v2 and the typing experience is heavenly. The sound is very muted though with the acrylic plate but another benefit is the even distribution of backlight.
Just what I was looking for, thank you kind sir! (your orion v2 sounds like a dream)
the reassurance on the weight put me at ease -- I'll have to decide if I want this to be a linear or tactile board after all :thumb:
No problem, glad to help out. ;)
I personally always like to try out different switches when I get a new board, even though it's a little risky trying something new on such an expensive board. I know that I'm a tactile man myself so I just like to try all different variations of tactility. You can always order another set of PCB and plates to have the ability of swapping out between tactility and linear switches. However I do want to try out some Vintage Blacks on a steel plate but I'll most likely try that on a refurbished 1800 or something.
Post by: digi on Tue, 12 January 2016, 13:43:40
Too bad the this don't havu the alps option :'(
+1, I'm almost happy or I would be throwing money at Elton (again =))
Post by: romevi on Tue, 12 January 2016, 13:49:07
Too bad the this don't havu the alps option :'(
+1, I'm almost happy or I would be throwing money at Elton (again =))
This is why I'm glad I was late to the party. I would've impulsed-buy, even though I told myself beforehand I'd join only if Alps were available.
Looks like I can thank my tardiness that I can stick to my original game plan.
Post by: GL1TCH3D on Tue, 12 January 2016, 15:57:53
pretty excited ~ as this is going to be first korean custom :eek:
(been eyeing 75% keyboards for awhile now)
I wonder if the butterfly numpad will ever make another round :p !!! I sure hope so
Could definitely use that ;D
Jeez how many group buys are you in? =P
I can't really talk because I'm in both my own and this onw though...
Post by: KetchyKech on Tue, 12 January 2016, 16:16:07
pretty excited ~ as this is going to be first korean custom :eek:
(been eyeing 75% keyboards for awhile now)
I wonder if the butterfly numpad will ever make another round :p !!! I sure hope so
Could definitely use that ;D
Jeez how many group buys are you in? =P
I can't really talk because I'm in both my own and this onw though...
haha, ever since i joined geekhack my money seems to slowly be disappearing :confused:
common side effect?
Post by: gnarlsagan on Tue, 12 January 2016, 18:42:31
Hey sorry if this was answered earlier, but:It doesn't allow switch top removal. There are a bunch of bottom row options,look at the pics in the first post, one of them shows the bottom row configurations. Yeah that cost is for an extra plate and pcb on top of your order.
Does your top plate allow opening switches without desoldering?Is there only a winkeyless layout or I can have a winkey bottom row?found a winkey here (http://cfile4.uf.tistory.com/image/260D1C4D565929F51536CA)
And also:QuoteMX PCB + Plate - $72 USD
Means ordering one more set of PCB+plate on top of original order?
And Micro-USB or Mini-USB?
Woah no switch top removal? Is it possible to to modify the plate to allow switch top removal? This feature has come in super handy on my Red Scarf 84.
Post by: E3E on Tue, 12 January 2016, 22:05:55
The v2 is definitely going to dwarf the popularity of the v1. Hehe. It's going to be interesting to see this take off. Jeez. 72 and it hasn't even been up for a day yet. Crazy stuff. The first one only had like 27 orders and 35 individual boards sold.
LOOKS LIKE I HAVE THE RARE FIRST EDITION RED MODEL AWW YE.
Silver was the least common color from v1. Then red, then black, then blue grey. Blue grey was the most popular color in the first Octagon GB.
5 Silver | 7 Red | 9 Black | 14 Blue Grey
People shouldn't collect boards because of reality, that's the wrong attitude imo. Who cares how rare the board is, buy it to use it.
Lol, I was joking, mang. :P Though I legitimately find the stats of the original GB very interesting.
I buy all my boards out of personal visual appeal and functionality! Rarity is a nice thing to gawk about sometimes, but only out of coincidence. I don't like looking for things just out of rarity, there has to be a personal appeal to it beyond that.
But, if something just happens to be rare out of coincidence, I do have that happy dance time in my mind of having something that might be just a little unique! Hey I'm not rich, let me have mine. :PP You are the guy who has a ton of TKLs though, hahaha.
I am not so blessed. I make very calculated and frugal purchases. I can't just buy whatever I want--yet. :P Hehe. Not throwin' any shade though, Steez. You're an awesome dude. I just don't have the finances is all.
Post by: Steezus on Tue, 12 January 2016, 22:27:24
The v2 is definitely going to dwarf the popularity of the v1. Hehe. It's going to be interesting to see this take off. Jeez. 72 and it hasn't even been up for a day yet. Crazy stuff. The first one only had like 27 orders and 35 individual boards sold.
LOOKS LIKE I HAVE THE RARE FIRST EDITION RED MODEL AWW YE.
Silver was the least common color from v1. Then red, then black, then blue grey. Blue grey was the most popular color in the first Octagon GB.
5 Silver | 7 Red | 9 Black | 14 Blue Grey
People shouldn't collect boards because of reality, that's the wrong attitude imo. Who cares how rare the board is, buy it to use it.
Lol, I was joking, mang. :P I buy all my boards out of personal visual appeal and functionality! Rarity is a nice thing to gawk about sometimes, but only out of coincidence. I don't like looking for things just out of rarity, there has to be a personal appeal to it beyond that.
But, if something just happens to be rare out of coincidence, I do have that happy dance time in my mind of having something that might be just a little unique! Hey I'm not rich, let me have mine. :PP You are they guy who has a ton of TKLs though, hahaha.
I am not so blessed. I make very calculated and frugal purchases. I can't just buy whatever I want--yet. :P Hehe. Not throwin' any shade though, Steez. You're an awesome dude. I just don't have the finances is all.
I wasn't accusing you or anything, but there is a lot of people that collect just for the sake of rarity here. If you're going to own a board then use it, otherwise it would be better off with somebody else that would enjoy it. I do have a fair bit of boards but I make sure they all see their use, hence why I'm trying to sell my RS96 since I feel that it doesn't get as much use as it should. I didn't mean anything rude either, I enjoy talking to you on here as well. I'm pretty broke now myself haha so I'm trying to just sell and use that money to buy more boards or items.
Post by: E3E on Tue, 12 January 2016, 22:29:25
Hey sorry if this was answered earlier, but:It doesn't allow switch top removal. There are a bunch of bottom row options,look at the pics in the first post, one of them shows the bottom row configurations. Yeah that cost is for an extra plate and pcb on top of your order.
Does your top plate allow opening switches without desoldering?Is there only a winkeyless layout or I can have a winkey bottom row?found a winkey here (http://cfile4.uf.tistory.com/image/260D1C4D565929F51536CA)
And also:QuoteMX PCB + Plate - $72 USD
Means ordering one more set of PCB+plate on top of original order?
And Micro-USB or Mini-USB?
Woah no switch top removal? Is it possible to to modify the plate to allow switch top removal? This feature has come in super handy on my Red Scarf 84.
Duck has never offered this. LZ has on the other hand. If you want to take a diamond or carbide file to the notches for a good couple of hours, haha. Easiest route would be to use a custom designed plate. The lack of switch top removal is what made the last Octagon such a ***** for me to customize in the ideal way I wanted it to be. I had to desolder everything, and it was my first desolder job on a plate mounted board, let alone an expensive custom.
It was nearly traumatic for me. :P
I believe one difference from the original and this one is ISO support, I think.
I wasn't accusing you or anything, but there is a lot of people that collect just for the sake of rarity here. If you're going to own a board then use it, otherwise it would be better off with somebody else that would enjoy it. I do have a fair bit of boards but I make sure they all see their use, hence why I'm trying to sell my RS96 since I feel that it doesn't get as much use as it should. I didn't mean anything rude either, I enjoy talking to you on here as well. I'm pretty broke now myself haha so I'm trying to just sell and use that money to buy more boards or items.
Yeah, I see that a lot as well. People getting hype over getting a rare artisan just because its rare, or a certain board or key cap set, etc. It's definitely not something I agree with either though. It should really have some real personal appeal beyond, oh look, it's scarce. Collector mentalities like that can be a little silly, I guess.
It's good that you rotate your boards! I try and do the same with my own, though this Hammer has become bound to my soul. It's hard to break a way from it for too long, though I do love showing love to all of mine! I have considered selling some, but sentimental value is what holds me back. Like, I haven't touched my v1 Octagon in a while because of the Hammer but with its custom designed hard carrying case and Lightpad companion, I feel like I can't separate them.
Yeah, I hear you on reselling to get new boards. I have a good share of blue Alps boards I could probably sell to get a good Korean custom or two, but I really like them, so it's probably not something I'd do, haha. I wanted to get two Octagon v2s, really, but I decided one is enough, and I'll be going with my original plan to match GMK SNES + clicky clear (vintage MX white), with zealio housings for that clicky RGB love.
I always go with the hot colors, or the cool blues, but I think a silver and grey board would be cool.
Course, this would bank on GMK SNES being successful on the relaunch.
I still think my idea for the SNES set in Famicom colors would be sick, but I don't know how I could set up a GB for that, even though I'd love to.
Post by: ctrlX on Wed, 13 January 2016, 00:49:13
Post by: darkclone24 on Wed, 13 January 2016, 01:58:09
Hold on now.. Does Octagon V2 have ISO support?
The plate and PCB in the diagram can take an ISO Enter; however the PCB doesn't look like it will take a split Left Shift. The plate does, however, so it might just be US ISO layout, or the diagram may be wrong.
Post by: dadoduk on Wed, 13 January 2016, 02:17:29
Q1) Where is shipping area?
. ex) From Canada to USA? or From Korea to USA
Post by: duckness on Wed, 13 January 2016, 02:30:38
I am internation student in USA.
Q1) Where is shipping area?
. ex) From Canada to USA? or From Korea to USA
See:
Shipping
Shipping will be from South Korea with EMS. Shipping cost will depend on your location. Each set weighs about (TBD) kg with packaging. Click here to check your zone (https://geekhack.org/index.php?topic=53348.msg1191127#msg1191127) and Click here to check their prices in Korean Won (http://www.koreapost.go.kr/eng/sub/subpage.jsp?contId=e1020300)
Post by: Arvid on Wed, 13 January 2016, 05:11:11
Hold on now.. Does Octagon V2 have ISO support?I messaged Elton about this, he said he would look into it but he believed it was only ANSI:/
Post by: ctrlX on Wed, 13 January 2016, 05:53:15
Interesting. Oh well, if it would support international ISO that would just be a bonus. I was already dead set on it being my first ANSI board.Hold on now.. Does Octagon V2 have ISO support?
The plate and PCB in the diagram can take an ISO Enter; however the PCB doesn't look like it will take a split Left Shift. The plate does, however, so it might just be US ISO layout, or the diagram may be wrong.
Post by: Jumie on Wed, 13 January 2016, 06:22:52
Post by: xondat on Wed, 13 January 2016, 08:02:42
is the spot still available?
You can put your name down and hope that he produces so many kits.
Post by: merlin64 on Wed, 13 January 2016, 09:53:07
Does that mean i completely lost my chance?
If not, does it mean I'm in for round 2 (I'm 35), and if so are we still paying the same time as everyone?
Or, does it mean I'm gonna have to keep my eyes peeled and do a mad rush when r2 happens?
Post by: ika on Wed, 13 January 2016, 09:57:05
So I'm a little confused, I unfortunately didn't make it in the first 30. What does that mean?
Does that mean i completely lost my chance?
If not, does it mean I'm in for round 2 (I'm 35), and if so are we still paying the same time as everyone?
Or, does it mean I'm gonna have to keep my eyes peeled and do a mad rush when r2 happens?
Quote
Limit of 30 sets for first round. If over, will take more time for the later orders.
Post by: Jumie on Wed, 13 January 2016, 10:10:12
So I'm a little confused, I unfortunately didn't make it in the first 30. What does that mean?
Does that mean i completely lost my chance?
If not, does it mean I'm in for round 2 (I'm 35), and if so are we still paying the same time as everyone?
Or, does it mean I'm gonna have to keep my eyes peeled and do a mad rush when r2 happens?
how do u know u're 35? I'd like to know mine too..
Post by: 64rky on Wed, 13 January 2016, 10:12:30
So I'm a little confused, I unfortunately didn't make it in the first 30. What does that mean?
Does that mean i completely lost my chance?
If not, does it mean I'm in for round 2 (I'm 35), and if so are we still paying the same time as everyone?
Or, does it mean I'm gonna have to keep my eyes peeled and do a mad rush when r2 happens?
how do u know u're 35? I'd like to know mine too..
Google doc on OP.
Post by: Jumie on Wed, 13 January 2016, 10:15:29
So I'm a little confused, I unfortunately didn't make it in the first 30. What does that mean?
Does that mean i completely lost my chance?
If not, does it mean I'm in for round 2 (I'm 35), and if so are we still paying the same time as everyone?
Or, does it mean I'm gonna have to keep my eyes peeled and do a mad rush when r2 happens?
how do u know u're 35? I'd like to know mine too..
Google doc on OP.
dang.. how could I missed that.. thanks :thumb:
Post by: c4103 on Wed, 13 January 2016, 10:29:42
Post by: 64rky on Wed, 13 January 2016, 10:38:33
I'm in! This will be my first custom and I'm super excited. I guess I'm probably late to the party and it will take a while, but whatever. That gives me more time to decide on switch choice and layout.
You have time to get on Zealios R2 :)
Post by: E3E on Wed, 13 January 2016, 10:39:19
So I'm a little confused, I unfortunately didn't make it in the first 30. What does that mean?
Does that mean i completely lost my chance?
If not, does it mean I'm in for round 2 (I'm 35), and if so are we still paying the same time as everyone?
Or, does it mean I'm gonna have to keep my eyes peeled and do a mad rush when r2 happens?QuoteLimit of 30 sets for first round. If over, will take more time for the later orders.
Lol, and I think the form was only at around, I don't know, 15 when I first saw it, but I couldn't make up my mind and now I'm at 67.
I'm so surprised this is even more popular than the Orion v2, considering how low the sales were of the first Octagon. I do hope that I'm still able to have mine produced at order # 67.
Duck's getting good business!
Post by: tadbitnerdy on Wed, 13 January 2016, 11:23:41
Post by: E3E on Wed, 13 January 2016, 11:31:03
In! I still haven't built my Lightsaver v2, or my Octogon v1. I might need to sell these :)
But what if you just end up not building your Octagon v2? :P
I have considered selling my v1, but I love the little "Octagon" nameplate too much. It'll be nice to compare the feels between the case-mounted PCB of the v1 versus the top bezel-mounted PCB of the v2 as well.
The v1 is just a solid hunk of aluminum, which is awesome in itself. There is as much charm over its simplicity as there is over the v2's complexity.
The fact the Octagon v1 was the first RGB duck board, too, is something I find awesome.
Post by: slushi on Wed, 13 January 2016, 11:34:48
In! I still haven't built my Lightsaver v2, or my Octogon v1. I might need to sell these :)
But what if you just end up not building your Octagon v2? :P
I have considered selling my v1, but I love the little "Octagon" nameplate too much. It'll be nice to compare the feels between the case-mounted PCB of the v1 versus the top bezel-mounted PCB of the v2 as well.
The v1 is just a solid hunk of aluminum, which is awesome in itself. There is as much charm over its simplicity as there is over the v2's complexity.
The fact the Octagon v1 was the first RGB duck board, too, is something I find awesome.
Glad to see you got your next board lined up!
Post by: Dreamre on Wed, 13 January 2016, 11:50:13
In! I still haven't built my Lightsaver v2, or my Octogon v1. I might need to sell these :)
But what if you just end up not building your Octagon v2? :P
I have considered selling my v1, but I love the little "Octagon" nameplate too much. It'll be nice to compare the feels between the case-mounted PCB of the v1 versus the top bezel-mounted PCB of the v2 as well.
The v1 is just a solid hunk of aluminum, which is awesome in itself. There is as much charm over its simplicity as there is over the v2's complexity.
The fact the Octagon v1 was the first RGB duck board, too, is something I find awesome.
E3E...stop trying to convince yourself that you don't want one. Deep down inside...you want one... :)) ;)
Post by: E3E on Wed, 13 January 2016, 11:51:09
In! I still haven't built my Lightsaver v2, or my Octogon v1. I might need to sell these :)
But what if you just end up not building your Octagon v2? :P
I have considered selling my v1, but I love the little "Octagon" nameplate too much. It'll be nice to compare the feels between the case-mounted PCB of the v1 versus the top bezel-mounted PCB of the v2 as well.
The v1 is just a solid hunk of aluminum, which is awesome in itself. There is as much charm over its simplicity as there is over the v2's complexity.
The fact the Octagon v1 was the first RGB duck board, too, is something I find awesome.
Glad to see you got your next board lined up!
Haha, yep! I've been waiting for this one for a while now! Still on the fence on whether or not I want to add a flat acrylic bottom to my order, but we have time. :)
Post by: mrboovn on Wed, 13 January 2016, 12:07:40
In! I still haven't built my Lightsaver v2, or my Octogon v1. I might need to sell these :)just let me know if you wanna sell your lightsaver :D
Post by: 64rky on Wed, 13 January 2016, 12:23:45
- which LEDs should I buy for this, or rather any board? Or rather, what are the specs of the LEDs I'd buy?
- are the bottom LEDs of this board RGB, or do we need to order those?
Yup, more than one Q, might be even more coming :)
Post by: Steezus on Wed, 13 January 2016, 12:31:56
Another n00b question incoming:
- which LEDs should I buy for this, or rather any board? Or rather, what are the specs of the LEDs I'd buy?
- are the bottom LEDs of this board RGB, or do we need to order those?
Yup, more than one Q, might be even more coming :)
2x3x4mm LEDs are generally the best for in switch LEDs. For anyone that doesn't want switch backlighting you will still need to supply your own LEDs for the indicators.
The RGB LEDs are supplied and presoldered on the underside of the PCB so there will be no work needed there.
Post by: E3E on Wed, 13 January 2016, 12:42:11
In! I still haven't built my Lightsaver v2, or my Octogon v1. I might need to sell these :)
But what if you just end up not building your Octagon v2? :P
I have considered selling my v1, but I love the little "Octagon" nameplate too much. It'll be nice to compare the feels between the case-mounted PCB of the v1 versus the top bezel-mounted PCB of the v2 as well.
The v1 is just a solid hunk of aluminum, which is awesome in itself. There is as much charm over its simplicity as there is over the v2's complexity.
The fact the Octagon v1 was the first RGB duck board, too, is something I find awesome.
E3E...stop trying to convince yourself that you don't want one. Deep down inside...you want one... :)) ;)
Oh I'm down for at least one! Haha, though I'd love to get as many as you though, or at least a second order in red with the flat acrylic bottom. :P
You though, you've got bases loaded!
Another n00b question incoming:
- which LEDs should I buy for this, or rather any board? Or rather, what are the specs of the LEDs I'd buy?
- are the bottom LEDs of this board RGB, or do we need to order those?
Yup, more than one Q, might be even more coming :)
I generally agree with what Steezus here. The only problem with 2x3x4mm LEDs is that they can impede the travel of thick low profile caps (ala Cherry profile), so you have to keep that in mind.
Some people actually put these inside the switch housings for a more diffused look--that would also get past the travel issues they might causes. Otherwise you could use 1.8mm LEDs or do what LastPilot did for his LZ and sand down the tops of the LEDs a bit to allow clearance.
Post by: Steezus on Wed, 13 January 2016, 13:16:22
Another n00b question incoming:
- which LEDs should I buy for this, or rather any board? Or rather, what are the specs of the LEDs I'd buy?
- are the bottom LEDs of this board RGB, or do we need to order those?
Yup, more than one Q, might be even more coming :)
I generally agree with what Steezus here. The only problem with 2x3x4mm LEDs is that they can impede the travel of thick low profile caps (ala Cherry profile), so you have to keep that in mind.
Some people actually put these inside the switch housings for a more diffused look--that would also get past the travel issues they might causes. Otherwise you could use 1.8mm LEDs or do what LastPilot did for his LZ and sand down the tops of the LEDs a bit to allow clearance.
Sanding down the LEDs is really easy to do and a nice fix if you find any caps rubbing. I for one have never had a problem with them other than some artisans, so I would just sand down the few that needed it. The light bleed fix that I did on Jane can prove to be a problem if not done right and caps can then rub and get stuck but that too was an easy fix as well.
Post by: xondat on Wed, 13 January 2016, 14:06:00
Post by: nickheller on Wed, 13 January 2016, 14:08:48
Just want to clarify - I was the 14th to submit the form, am I allowed to change the options?
If you have any changes, just PM me.
I was told 2 months estimated time of shipping, but that was what I was told for Orion, so just FYI.
I'll post a public sheet soon for everyone to see their orders.
Post by: xondat on Wed, 13 January 2016, 14:09:50
Just want to clarify - I was the 14th to submit the form, am I allowed to change the options?If you have any changes, just PM me.
I was told 2 months estimated time of shipping, but that was what I was told for Orion, so just FYI.
I'll post a public sheet soon for everyone to see their orders.
Merci
Post by: alienman82 on Wed, 13 January 2016, 14:15:30
Post by: SaySo on Wed, 13 January 2016, 14:29:42
Post by: 64rky on Wed, 13 January 2016, 14:47:01
are the duck feet only silver alu? or could I get black ones?
This is a darn good point! I also didn't realise initially that the flat bottom comes with feet, lol!! Might remove the duck feet from my order if they don't come in the blue...
Post by: alienman82 on Wed, 13 January 2016, 14:50:01
Post by: c4103 on Wed, 13 January 2016, 15:29:06
I'm in! This will be my first custom and I'm super excited. I guess I'm probably late to the party and it will take a while, but whatever. That gives me more time to decide on switch choice and layout.
You have time to get on Zealios R2 :)
When is that happening?
Post by: xondat on Wed, 13 January 2016, 15:32:35
I'm in! This will be my first custom and I'm super excited. I guess I'm probably late to the party and it will take a while, but whatever. That gives me more time to decide on switch choice and layout.
You have time to get on Zealios R2 :)
When is that happening?
Sale is up any time soon.
Post by: roostrc0gburn on Wed, 13 January 2016, 15:50:32
I'm in! This will be my first custom and I'm super excited. I guess I'm probably late to the party and it will take a while, but whatever. That gives me more time to decide on switch choice and layout.
You have time to get on Zealios R2 :)
When is that happening?
Sale is up any time soon.
yussssssss. perfect timing
Post by: ika on Wed, 13 January 2016, 17:23:30
In! I still haven't built my Lightsaver v2, or my Octogon v1. I might need to sell these :)
But what if you just end up not building your Octagon v2? :P
I have considered selling my v1, but I love the little "Octagon" nameplate too much. It'll be nice to compare the feels between the case-mounted PCB of the v1 versus the top bezel-mounted PCB of the v2 as well.
The v1 is just a solid hunk of aluminum, which is awesome in itself. There is as much charm over its simplicity as there is over the v2's complexity.
The fact the Octagon v1 was the first RGB duck board, too, is something I find awesome.
Ah that's what's missing! I knew the pictures looked somehow "wrong" but couldn't put my finger on what it was missing. The badge!
Post by: beltet on Wed, 13 January 2016, 17:47:37
Or is it going to be like the first version 30+30?
Post by: E3E on Wed, 13 January 2016, 18:31:04
Is there any possibility that late comers(?) will have a shot on this now? I made a order but not sure what place I came in. The doc haven't been updated yet. Somewhere around 75 I guess.
Or is it going to be like the first version 30+30?
I will be so upset if my order at #67 won't be able to be fulfilled. :(
Especially since I had gotten here early, but couldn't make up my mind at first. I guess we'll have to wait and see.
In! I still haven't built my Lightsaver v2, or my Octogon v1. I might need to sell these :)
But what if you just end up not building your Octagon v2? :P
I have considered selling my v1, but I love the little "Octagon" nameplate too much. It'll be nice to compare the feels between the case-mounted PCB of the v1 versus the top bezel-mounted PCB of the v2 as well.
The v1 is just a solid hunk of aluminum, which is awesome in itself. There is as much charm over its simplicity as there is over the v2's complexity.
The fact the Octagon v1 was the first RGB duck board, too, is something I find awesome.
Ah that's what's missing! I knew the pictures looked somehow "wrong" but couldn't put my finger on what it was missing. The badge!
Yep, I certainly think the badge was an iconic part of the original. Though it did look best with the stickers and not without. I layered mine with brass foil tape to really make the "OCTAGON" lettering pop and shine along with the rest of the gold accents in the board, hehe. :D
Post by: Steezus on Wed, 13 January 2016, 19:14:59
Is there any possibility that late comers(?) will have a shot on this now? I made a order but not sure what place I came in. The doc haven't been updated yet. Somewhere around 75 I guess.
Or is it going to be like the first version 30+30?
I will be so upset if my order at #67 won't be able to be fulfilled. :(
Especially since I had gotten here early, but couldn't make up my mind at first. I guess we'll have to wait and see.
There was 60 made of the Orion v2 for geekhack. Not sure whether that was all the interest or if 60 was the cut off point, best of luck. :thumb:
Post by: elton5354 on Wed, 13 January 2016, 19:46:35
Orders will be fulfilled by 40+40+...
Post by: 64rky on Wed, 13 January 2016, 19:55:40
The Duck Feet's are going to be available only in anodized silver.
Orders will be fulfilled by 40+40+...
40+... I AM IN, WOOO HOOOO :)
Post by: Steezus on Wed, 13 January 2016, 20:01:55
The Duck Feet's are going to be available only in anodized silver.
Orders will be fulfilled by 40+40+...
40+... I AM IN, WOOO HOOOO :)
Much congrats, that helps out a lot of people now. :thumb:
Post by: FranksNewLiver on Wed, 13 January 2016, 21:22:41
The Duck Feet's are going to be available only in anodized silver.
Orders will be fulfilled by 40+40+...
woot, 38.
Crap, my luck was wasted when I could have been winning powerball.
Post by: Steezus on Wed, 13 January 2016, 21:32:35
The Duck Feet's are going to be available only in anodized silver.
Orders will be fulfilled by 40+40+...
woot, 38.
Crap, my luck was wasted when I could have been winning powerball.
Then you could've bought all the Octagons!
Post by: beltet on Thu, 14 January 2016, 08:20:53
The Duck Feet's are going to be available only in anodized silver.
Orders will be fulfilled by 40+40+...
OMG! That is really great news! Now I just need the funds :p....
Post by: c4103 on Thu, 14 January 2016, 09:48:19
Post by: 64rky on Thu, 14 January 2016, 09:52:24
Where are you guys seeing the number you got?
Link to Google doc on OP
Post by: E3E on Thu, 14 January 2016, 13:45:58
Is there any possibility that late comers(?) will have a shot on this now? I made a order but not sure what place I came in. The doc haven't been updated yet. Somewhere around 75 I guess.
Or is it going to be like the first version 30+30?
I will be so upset if my order at #67 won't be able to be fulfilled. :(
Especially since I had gotten here early, but couldn't make up my mind at first. I guess we'll have to wait and see.
There was 60 made of the Orion v2 for geekhack. Not sure whether that was all the interest or if 60 was the cut off point, best of luck. :thumb:
I'm happy as a cucumber, I think. I mean, I think that's what people say.
Aww yeah! I'm gonna have the silver and grey aluminum Octagon v2 as the main setup and I'm going to use the Duck feet for the carbon fiber case I plan on buying for my second Alps Eagle.
Half tempted to add the acrylic flat bottom, but I think I will be happy with just one. :D
Post by: Steezus on Thu, 14 January 2016, 13:53:36
Is there any possibility that late comers(?) will have a shot on this now? I made a order but not sure what place I came in. The doc haven't been updated yet. Somewhere around 75 I guess.
Or is it going to be like the first version 30+30?
I will be so upset if my order at #67 won't be able to be fulfilled. :(
Especially since I had gotten here early, but couldn't make up my mind at first. I guess we'll have to wait and see.
There was 60 made of the Orion v2 for geekhack. Not sure whether that was all the interest or if 60 was the cut off point, best of luck. :thumb:
I'm happy as a cucumber, I think. I mean, I think that's what people say.
Aww yeah! I'm gonna have the silver and grey aluminum Octagon v2 as the main setup and I'm going to use the Duck feet for the carbon fiber case I plan on buying for my second Alps Eagle.
Half tempted to add the acrylic flat bottom, but I think I will be happy with just one. :D
I'm happy to see that you got in, it would've been a damn shame if you missed the cut-off.
That sounds like a lovely Octagon v2, the duck feet for you Alps Eagle will be great as well. I really need to get myself an Alps Eagle board, it seems like a lot of work though. :p
I personally am sad that I missed out on the flat acrylic bottom, it looks so much better than what anybody expected for the Orion v2. For $22 I'd so go for it. :thumb:
Post by: mrboovn on Thu, 14 January 2016, 14:24:14
Post by: E3E on Thu, 14 January 2016, 14:32:33
Having an aluminum bottom as my main option,also with a duck feet.So should i get a Acrylic bottom or flat acrylic bottom with chrome feet as the extra bottom? and what is the difference between chrome feet and duck feet ? or they are one? Thanks :D
The Duck feet are intended for use with the flat acrylic bottom as a more elegant option as opposed to the normal conical feet. That's all, really. They aren't meant to go on the other bottom housings.
Post by: Steezus on Thu, 14 January 2016, 14:35:55
Having an aluminum bottom as my main option,also with a duck feet.So should i get a Acrylic bottom or flat acrylic bottom with chrome feet as the extra bottom? and what is the difference between chrome feet and duck feet ? or they are one? Thanks :D
The Duck feet are intended for use with the flat acrylic bottom as a more elegant option as opposed to the normal conical feet. That's all, really. They aren't meant to go on the other bottom housings.
Agreed, the angled acrylic bottom will have soft rubber pads on the bottom. Adding feet to that would increase the typing angle an insane amount.
Post by: romevi on Thu, 14 January 2016, 14:37:30
Adding feet to that would increase the typing angle an insane amount.Having an aluminum bottom as my main option,also with a duck feet.So should i get a Acrylic bottom or flat acrylic bottom with chrome feet as the extra bottom? and what is the difference between chrome feet and duck feet ? or they are one? Thanks :D
The Duck feet are intended for use with the flat acrylic bottom as a more elegant option as opposed to the normal conical feet. That's all, really. They aren't meant to go on the other bottom housings.
Would love to try this, if just for kicks and giggles.
Post by: xondat on Thu, 14 January 2016, 15:17:44
Adding feet to that would increase the typing angle an insane amount.Having an aluminum bottom as my main option,also with a duck feet.So should i get a Acrylic bottom or flat acrylic bottom with chrome feet as the extra bottom? and what is the difference between chrome feet and duck feet ? or they are one? Thanks :D
The Duck feet are intended for use with the flat acrylic bottom as a more elegant option as opposed to the normal conical feet. That's all, really. They aren't meant to go on the other bottom housings.
Would love to try this, if just for kicks and giggles.
20 degree angle :eek:
Post by: romevi on Thu, 14 January 2016, 15:37:58
Adding feet to that would increase the typing angle an insane amount.Having an aluminum bottom as my main option,also with a duck feet.So should i get a Acrylic bottom or flat acrylic bottom with chrome feet as the extra bottom? and what is the difference between chrome feet and duck feet ? or they are one? Thanks :D
The Duck feet are intended for use with the flat acrylic bottom as a more elegant option as opposed to the normal conical feet. That's all, really. They aren't meant to go on the other bottom housings.
Would love to try this, if just for kicks and giggles.
20 degree angle :eek:
:))
Post by: 64rky on Thu, 14 January 2016, 15:39:24
Post by: Steezus on Thu, 14 January 2016, 15:40:30
Weird question, but does anyone know if the Orion V2 bottom would fit on the Octagon V2?
The dimensions of the board is different, therefore it wouldn't it fit.
Post by: popkorn62 on Thu, 14 January 2016, 17:02:52
Post by: Steezus on Thu, 14 January 2016, 17:39:35
Hopefully this will arrive before I have to move :D :D
When might that be? This GB will most likely take several months.
Post by: popkorn62 on Thu, 14 January 2016, 18:12:11
Hopefully this will arrive before I have to move :D :D
When might that be? This GB will most likely take several months.
As long as it happens before August I'll be fine
Post by: Steezus on Thu, 14 January 2016, 18:13:05
Hopefully this will arrive before I have to move :D :D
When might that be? This GB will most likely take several months.
As long as it happens before August I'll be fine
Being in the first round you should be fine then. :thumb:
Post by: metalliqaz on Thu, 14 January 2016, 18:14:26
Post by: omgar on Thu, 14 January 2016, 22:08:16
Post by: ccc24 on Thu, 14 January 2016, 23:08:55
And can anyone with a blue grey case and hyperfuse set show me what they look like together? Deciding on which color will look best with hyperfuse.
Post by: duckness on Fri, 15 January 2016, 00:56:19
Can anyone explain the difference in feel between the 2 plates? I currently have the aluminum as I assume a softer metal will sound less pingy.
See:
Jokes aside, a steel plate will be heavier, more rigid, and louder (in that vibrations travel much more easily through steel). Aluminum is lighter, softer, flexier, but dampens vibrations better. Steel plates are notorious for "pinging", where you hear the "sproing" of the spring after an upstroke. I've never had that issue with an alu or plastic plate.
I picked aluminium as I find the stainless steel ones easier to scratch. The aluminium ones have a sandblasted finish while the steel ones have a brushed finish. I hope this helps!
i'll let those with personal knowledge of differences weigh in, as I can only comment based on what i've read --
but apparently:
tactile switches --> aluminum plate
linear switches --> steel plate
the reason I see the most pop up is that the rigidity of metals play a role in how it feels (e.g., how much flex you get if you bottom out) and there was some mention of how sounds resonate
:'( no clue though, it may be so minor that one may hardly notice
someone guide us! :-\
KetckhyKech you basically got the right idea. However I can guarantee you that the board itself will already weight a ton so opting for a steel plate just for the added weight isn't really a good idea.
A steel plate has the least amount of flex to it, which is what you want for linear switches to have a fluid motion of each key press without any additional "feedback".
An aluminum plate gives a slight bit of flex to it, which is good for tactile switches to help make the tactility more pronounced. Aluminum tends to give the best sound in terms of tactile switches.
An acrylic plate gives a fair bit of flex, it is best in terms of tactility and also my favorite. I have an acrylic plate with 65g Purple Zealios for my Orion v2 and the typing experience is heavenly. The sound is very muted though with the acrylic plate but another benefit is the even distribution of backlight.
Post by: tkpresent on Fri, 15 January 2016, 14:22:54
Hope it's still available...
Post by: Steezus on Fri, 15 January 2016, 16:02:34
Just ordered.
Hope it's still available...
If nobody else did then you should be #80, the last one for the second batch. There is a chance that there could be a third batch but I'm assuming it would have to be another 40 orders for that to happen.
Post by: romevi on Fri, 15 January 2016, 16:07:58
Just ordered.There is a chance that there could be a third batch but I'm assuming it would have to be another 40 orders for that to happen.
Hope it's still available...
I would like this very much. Turns out I may be able to join, and I'd rather submit my own unique request than have to ask anybody to take over theirs.
Post by: asgeirtj on Fri, 15 January 2016, 16:18:06
Post by: romevi on Fri, 15 January 2016, 16:23:20
I reckon not every one ordered will pay their invoice so some people who are back in the list could get into the first batch I'd think
Would those people be able to modify their orders when they get bumped up? I'd imagine so...
Post by: merlin64 on Fri, 15 January 2016, 16:56:40
Post by: Steezus on Fri, 15 January 2016, 16:58:44
So glad that I'm in. But my wallet isn't. This + the last round of Granite on Massdrop is gonna be expensive.
Just skip out on a few meals, keyboards are more important anyways.
Post by: ccc24 on Fri, 15 January 2016, 17:19:42
Post by: 64rky on Fri, 15 January 2016, 17:27:31
anyone have any opinions on which case color would look best with the hyperfuse set? Blue-Grey or silver?
Blue grey is pretty neutral, but the blue grey is awesome, I have it in the Orion :)
Post by: breitling on Fri, 15 January 2016, 17:30:06
So glad that I'm in. But my wallet isn't. This + the last round of Granite on Massdrop is gonna be expensive.
Just skip out on a few meals, keyboards are more important anyways.
^This. I've been on a ramen diet since I started buying keyboards.
Post by: romevi on Fri, 15 January 2016, 17:30:16
anyone have any opinions on which case color would look best with the hyperfuse set? Blue-Grey or silver?
Blue grey is pretty neutral, but the blue grey is awesome, I have it in the Orion :)
If I were to join this I'd definitely get the blue/gray. It looks amazing.
Post by: aaron6301 on Fri, 15 January 2016, 17:37:38
anyone have any opinions on which case color would look best with the hyperfuse set? Blue-Grey or silver?
Blue grey is pretty neutral, but the blue grey is awesome, I have it in the Orion :)
If I were to join this I'd definitely get the blue/gray. It looks amazing.
I was on the fence about Blue Grey and ordered Silver. I think I might have to change my color choice :)
Post by: KaminKevCrew on Fri, 15 January 2016, 18:58:31
anyone have any opinions on which case color would look best with the hyperfuse set? Blue-Grey or silver?
HEY!!! Blue grey and hyperfuse are what I was planning!!!
XD I think they would both look great.
Post by: alienman82 on Fri, 15 January 2016, 19:25:35
Post by: Steezus on Fri, 15 January 2016, 19:30:12
Show Image(http://i.imgur.com/7jxPj4w.jpg)
Is this layout supported? The mock-up of the plate appears to, but the layout pic argues against it.
Looking at the right shift specifically
It appears that the long shift is no longer supported
(http://cfile22.uf.tistory.com/image/26218F4E5659291514F381)
Post by: alienman82 on Fri, 15 January 2016, 19:37:09
Post by: Delirious on Fri, 15 January 2016, 19:48:47
Show Image(http://i.imgur.com/7jxPj4w.jpg)
Is this layout supported? The mock-up of the plate appears to, but the layout pic argues against it.
Looking at the right shift specifically
That looks supported to me. This is my Gon-60 plate with the same separation bar. It actually helps making the switch studier if using 2.75x Shift
(http://i.imgur.com/c8Sfb4C.jpg)
Post by: Steezus on Fri, 15 January 2016, 19:56:47
Show Image(http://i.imgur.com/7jxPj4w.jpg)
Is this layout supported? The mock-up of the plate appears to, but the layout pic argues against it.
Looking at the right shift specifically
That looks supported to me. This is my Gon-60 plate with the same separation bar. It actually helps making the switch studier if using 2.75x ShiftShow Image(http://i.imgur.com/c8Sfb4C.jpg)
So what you use two switches rather than stabilizers?
Post by: KaminKevCrew on Fri, 15 January 2016, 19:59:32
No, you just put the switch in the middle there with some stabs on the sides.Show Image(http://i.imgur.com/7jxPj4w.jpg)
Is this layout supported? The mock-up of the plate appears to, but the layout pic argues against it.
Looking at the right shift specifically
That looks supported to me. This is my Gon-60 plate with the same separation bar. It actually helps making the switch studier if using 2.75x ShiftShow Image(http://i.imgur.com/c8Sfb4C.jpg)
So what you use two switches rather than stabilizers?
Post by: Steezus on Fri, 15 January 2016, 20:02:50
No, you just put the switch in the middle there with some stabs on the sides.Show Image(http://i.imgur.com/7jxPj4w.jpg)
Is this layout supported? The mock-up of the plate appears to, but the layout pic argues against it.
Looking at the right shift specifically
That looks supported to me. This is my Gon-60 plate with the same separation bar. It actually helps making the switch studier if using 2.75x ShiftShow Image(http://i.imgur.com/c8Sfb4C.jpg)
So what you use two switches rather than stabilizers?
Yeah but the Octagon doesn't have cutouts in the plate for stabs.
Post by: Delirious on Fri, 15 January 2016, 20:07:12
Show Image(http://i.imgur.com/7jxPj4w.jpg)
Is this layout supported? The mock-up of the plate appears to, but the layout pic argues against it.
Looking at the right shift specifically
That looks supported to me. This is my Gon-60 plate with the same separation bar. It actually helps making the switch studier if using 2.75x ShiftShow Image(http://i.imgur.com/c8Sfb4C.jpg)
So what you use two switches rather than stabilizers?
Yea I use the Pure layout.
Post by: KaminKevCrew on Fri, 15 January 2016, 20:07:28
The way that stabs are set up in the board with the grey plate (above), the stab cutouts are above the switch (as you can see on the enter key) so I wouldn't be surprised if you can't see them because of the switches.No, you just put the switch in the middle there with some stabs on the sides.Show Image(http://i.imgur.com/7jxPj4w.jpg)
Is this layout supported? The mock-up of the plate appears to, but the layout pic argues against it.
Looking at the right shift specifically
That looks supported to me. This is my Gon-60 plate with the same separation bar. It actually helps making the switch studier if using 2.75x ShiftShow Image(http://i.imgur.com/c8Sfb4C.jpg)
So what you use two switches rather than stabilizers?
Yeah but the Octagon doesn't have cutouts in the plate for stabs.
Also, if you look at the schematic type pictures in the first post, the plate clearly supports the stabs for a long shift :)
Post by: ika on Fri, 15 January 2016, 20:08:14
No, you just put the switch in the middle there with some stabs on the sides.Show Image(http://i.imgur.com/7jxPj4w.jpg) (http://i.imgur.com/7jxPj4w.jpg)
Is this layout supported? The mock-up of the plate appears to, but the layout pic argues against it.
Looking at the right shift specifically
That looks supported to me. This is my Gon-60 plate with the same separation bar. It actually helps making the switch studier if using 2.75x Shift
(http://i.imgur.com/c8Sfb4C.jpg) (http://i.imgur.com/c8Sfb4C.jpg)
So what you use two switches rather than stabilizers?
Yeah but the Octagon doesn't have cutouts in the plate for stabs.
It does, and does support long right-shift from the looks of it:
(http://cfile22.uf.tistory.com/original/227249495659292223A610) (http://cfile22.uf.tistory.com/original/227249495659292223A610)
Post by: Steezus on Fri, 15 January 2016, 20:11:24
No, you just put the switch in the middle there with some stabs on the sides.Show ImageShow Image(http://i.imgur.com/7jxPj4w.jpg) (http://i.imgur.com/7jxPj4w.jpg)
Is this layout supported? The mock-up of the plate appears to, but the layout pic argues against it.
Looking at the right shift specifically
That looks supported to me. This is my Gon-60 plate with the same separation bar. It actually helps making the switch studier if using 2.75x Shift
(http://i.imgur.com/c8Sfb4C.jpg) (http://i.imgur.com/c8Sfb4C.jpg)
So what you use two switches rather than stabilizers?
Yeah but the Octagon doesn't have cutouts in the plate for stabs.
It does, and does support long right-shift from the looks of it:
(http://cfile22.uf.tistory.com/original/227249495659292223A610) (http://cfile22.uf.tistory.com/original/227249495659292223A610)
Ah ok that's good to know, it appears the picture I grabbed was at the perfect angle to cover it up. :p
Post by: alienman82 on Fri, 15 January 2016, 20:12:45
Post by: E3E on Fri, 15 January 2016, 21:37:04
Show Image(http://i.imgur.com/7jxPj4w.jpg)
Is this layout supported? The mock-up of the plate appears to, but the layout pic argues against it.
Looking at the right shift specifically
Pff, short right shifts are so much better. Long shifts are so redundant.
Though I understand if you're having trouble finding the caps there. Definitely another kink in the road that is non-standard layouts.
Post by: Zedd on Sat, 16 January 2016, 16:59:36
Post by: Steezus on Sat, 16 January 2016, 17:10:17
ordered!
Best of luck and welcome to geekhack! It appears we're past the 80 order mark so there is a chance anyone entering now may not get a board, don't let that discourage you to order still since if there is enough orders a third round could happen. :thumb:
Post by: Zapheo on Sat, 16 January 2016, 17:36:57
Hey guys I can't really tell, but is this the grey blue bottom with silver top?
Post by: 64rky on Sat, 16 January 2016, 17:38:07
ordered!
Best of luck and welcome to geekhack! It appears we're past the 80 order mark so there is a chance anyone entering now may not get a board, don't let that discourage you to order still since if there is enough orders a third round could happen. :thumb:
wouldn't they just go into a later batch?
The Duck Feet's are going to be available only in anodized silver.
Orders will be fulfilled by 40+40+...
Post by: Steezus on Sat, 16 January 2016, 17:42:22
ordered!
Best of luck and welcome to geekhack! It appears we're past the 80 order mark so there is a chance anyone entering now may not get a board, don't let that discourage you to order still since if there is enough orders a third round could happen. :thumb:
wouldn't they just go into a later batch?
Yeah that's what I said but I'm not sure a third batch would happen unless their was a full 40 more orders, depending on how overloaded Duck is or not. Have to remember this isn't the only site that he is doing the GB for as well.
Post by: 64rky on Sat, 16 January 2016, 17:47:49
ordered!
Best of luck and welcome to geekhack! It appears we're past the 80 order mark so there is a chance anyone entering now may not get a board, don't let that discourage you to order still since if there is enough orders a third round could happen. :thumb:
wouldn't they just go into a later batch?
Yeah that's what I said but I'm not sure a third batch would happen unless their was a full 40 more orders, depending on how overloaded Duck is or not. Have to remember this isn't the only site that he is doing the GB for as well.
ah, gotcha... makes sense
Post by: xondat on Sat, 16 January 2016, 18:57:08
Post by: KaminKevCrew on Sat, 16 January 2016, 18:58:25
Kinda annoyed that it was 30 but then raised to 80 because of whatever reason. Really wanted it due to the exclusivity and meaning of it but felt that it's going to lose some of that because of the amount. Obviously there's no pulling back to 30 but still going to go ahead with it.Why wouldn't you just be happy that more people will get to enjoy the board now?
Post by: Steezus on Sat, 16 January 2016, 19:06:08
Kinda annoyed that it was 30 but then raised to 80 because of whatever reason. Really wanted it due to the exclusivity and meaning of it but felt that it's going to lose some of that because of the amount. Obviously there's no pulling back to 30 but still going to go ahead with it.
In my opinion it should never be about exclusivity, sure it feels more special when less are made but 80 is still an insanely low number. It's such a fantastic board and I feel more people should get the opportunity to own a Duck. The reason why customs aren't mass produced is the creator is generally not comfortable with dealing with that many, you tend to lose on quality.
Post by: KaminKevCrew on Sat, 16 January 2016, 19:07:04
That's how I feel about it :) I'm glad I'll get to build and own one...Kinda annoyed that it was 30 but then raised to 80 because of whatever reason. Really wanted it due to the exclusivity and meaning of it but felt that it's going to lose some of that because of the amount. Obviously there's no pulling back to 30 but still going to go ahead with it.
In my opinion it should never be about exclusivity, sure it feels more special when less are made but 80 is still an insanely low number. It's such a fantastic board and I feel more people should get the opportunity to own a Duck.
Post by: xondat on Sat, 16 January 2016, 19:08:49
Post by: KaminKevCrew on Sat, 16 January 2016, 19:09:47
True that more people get the experience but I get hard-ons from knowing I have 1 of x. Makes everything a lot more special for me.You know you have one of 80, or whatever the number ends up being. What's your point?
Post by: xondat on Sat, 16 January 2016, 19:13:28
True that more people get the experience but I get hard-ons from knowing I have 1 of x. Makes everything a lot more special for me.You know you have one of 80, or whatever the number ends up being. What's your point?
Smaller numbers are nicer & are better long term (creates loyalty etc). If everyone can get one then what's the point?
Post by: KaminKevCrew on Sat, 16 January 2016, 19:16:38
Post by: xondat on Sat, 16 January 2016, 19:26:30
My point is that not everyone can get one anyway... Even if the numbers were in the thousands, there are plenty of people that would still want one.
I agree with your point, I just personally wouldn't of made the decision to increase the drop amount. I like the idea of more people experiencing it though, thanks guys.
Post by: munch on Sat, 16 January 2016, 19:30:07
Kinda annoyed that it was 30 but then raised to 80 because of whatever reason. Really wanted it due to the exclusivity and meaning of it but felt that it's going to lose some of that because of the amount. Obviously there's no pulling back to 30 but still going to go ahead with it.
have you thought about that there might be more made for the Korean community too? ;-)
maybe even a Chinese GB as well...
Post by: 64rky on Sat, 16 January 2016, 19:30:56
My point is that not everyone can get one anyway... Even if the numbers were in the thousands, there are plenty of people that would still want one.
I agree with your point, I just personally wouldn't of made the decision to increase the drop amount. I like the idea of more people experiencing it though, thanks guys.
Wasn't there always going to be more than 30? The first batch would have been 30.
Post by: Steezus on Sat, 16 January 2016, 19:33:46
My point is that not everyone can get one anyway... Even if the numbers were in the thousands, there are plenty of people that would still want one.
I agree with your point, I just personally wouldn't of made the decision to increase the drop amount. I like the idea of more people experiencing it though, thanks guys.
Wasn't there always going to be more than 30? The first batch would have been 30.
Yeah, it all depends on interest really but with more and more GBs there will obviously be more interest. I believe the LSv2 had exactly 30 but then the Orion v2 had 60, and now 80+.
Post by: swornxin on Sat, 16 January 2016, 22:42:30
Hoping for a Duck or Viper version two in the near future. Such beautiful cases that come with all of them.
Post by: Steezus on Sat, 16 January 2016, 22:43:42
I snagged the blue grey from version one, and it is a stunning colour. Still waiting on Hyperfuse so it hasn't been used yet, but soon. Haha.
Hoping for a Duck or Viper version two in the near future. Such beautiful cases that come with all of them.
It'll be a couple years before a Duck Viper/Eagle v2, Duck already has other plans for LSv3 and then Orion v3 after this.
Post by: KetchyKech on Sun, 17 January 2016, 11:14:51
Kinda annoyed that it was 30 but then raised to 80 because of whatever reason. Really wanted it due to the exclusivity and meaning of it but felt that it's going to lose some of that because of the amount. Obviously there's no pulling back to 30 but still going to go ahead with it.
In my opinion it should never be about exclusivity, sure it feels more special when less are made but 80 is still an insanely low number. It's such a fantastic board and I feel more people should get the opportunity to own a Duck. The reason why customs aren't mass produced is the creator is generally not comfortable with dealing with that many, you tend to lose on quality.
Omg, this! I was in the first 30 (first group buy ever too), and im glad that its 40, 40 & that more people get to get in....Its nice to be a special snowflake, but as Steezus mentioned, 80 is still so damn low. The exclusivity/prestige/mystique of the product will remain intact !
On another note, I hope as get the opportunity to nab a Lightsaver v3, cause i really believe thats endgame for me :-*
...Or...I'll be beyond content if they bring back the butterfly numpad ;D
Post by: swornxin on Sun, 17 January 2016, 11:22:06
Well I'm interested in Orion v3 as well, so no worries. ;D ;D ;DI snagged the blue grey from version one, and it is a stunning colour. Still waiting on Hyperfuse so it hasn't been used yet, but soon. Haha.
Hoping for a Duck or Viper version two in the near future. Such beautiful cases that come with all of them.
It'll be a couple years before a Duck Viper/Eagle v2, Duck already has other plans for LSv3 and then Orion v3 after this.
Post by: tkpresent on Sun, 17 January 2016, 11:26:52
or is there only one type of board that I can choose/build whatever I want when I build the keyboard?
Sorry about the basic question. This gonna be my first custom keyboard.
Post by: E3E on Sun, 17 January 2016, 11:50:39
Kinda annoyed that it was 30 but then raised to 80 because of whatever reason. Really wanted it due to the exclusivity and meaning of it but felt that it's going to lose some of that because of the amount. Obviously there's no pulling back to 30 but still going to go ahead with it.
This is ridiculous. So for people like me who knew about this board way ahead of time (as an Octagon lover, that should be obvious) but had a busy day and couldn't make up a decision in time for the first batch (that ended up with me being at position #67), we should just get screwed over? No, sorry, but that is stupid. Nothing against you, but this kind of thinking is really some of the most terrible in the community. So many people get wrapped up in exclusivity. It should never be about that. Having something just to say you have something rare or coveted is stupid and selfish.
Look at me, I'm a special snow flake. Look at these rare boards and artisans I pissed my money away into. No. Lol. Just no.
That said, enjoy your damn Octagon v2 for what it is! An AWESOME board. Like Steez said, 80 is still very low compared to anything OEM. It might be higher than the paltry 27 orders (35 boards) of the first Octagon GB, but it's still limited!
I think the hype from the second Orion and draw from the reddit community as well as more awareness in general has contributed to the huge influx for this GB.
Like, another one that shocked me was how many people ordered a Mira. I didn't think that'd even even hit the numbered maximum, but it surpassed it!
Post by: Bromono on Sun, 17 January 2016, 14:07:17
Kinda annoyed that it was 30 but then raised to 80 because of whatever reason. Really wanted it due to the exclusivity and meaning of it but felt that it's going to lose some of that because of the amount. Obviously there's no pulling back to 30 but still going to go ahead with it.
The only reason I can see people wanting exclusive stuff is so that they can mark up the price and re-sell.
Defeats the purpose in my opinion.
Let people, who are willing to pay for it, get one.
Keyboards dont need to start following the artisan scene.
Post by: roostrc0gburn on Sun, 17 January 2016, 14:09:01
Kinda annoyed that it was 30 but then raised to 80 because of whatever reason. Really wanted it due to the exclusivity and meaning of it but felt that it's going to lose some of that because of the amount. Obviously there's no pulling back to 30 but still going to go ahead with it.
This is ridiculous. So for people like me who knew about this board way ahead of time (as an Octagon lover, that should be obvious) but had a busy day and couldn't make up a decision in time for the first batch (that ended up with me being at position #67), we should just get screwed over? No, sorry, but that is stupid. Nothing against you, but this kind of thinking is really some of the most terrible in the community. So many people get wrapped up in exclusivity. It should never be about that. Having something just to say you have something rare or coveted is stupid and selfish.
Look at me, I'm a special snow flake. Look at these rare boards and artisans I pissed my money away into. No. Lol. Just no.
That said, enjoy your damn Octagon v2 for what it is! An AWESOME board. Like Steez said, 80 is still very low compared to anything OEM. It might be higher than the paltry 27 orders (35 boards) of the first Octagon GB, but it's still limited!
I think the hype from the second Orion and draw from the reddit community as well as more awareness in general has contributed to the huge influx for this GB.
Like, another one that shocked me was how many people ordered a Mira. I didn't think that'd even even hit the numbered maximum, but it surpassed it!
i think it is still yet to be seen if that one will make it, though. duck is definitely more reliable on his promises
Post by: E3E on Sun, 17 January 2016, 14:47:27
Kinda annoyed that it was 30 but then raised to 80 because of whatever reason. Really wanted it due to the exclusivity and meaning of it but felt that it's going to lose some of that because of the amount. Obviously there's no pulling back to 30 but still going to go ahead with it.
The only reason I can see people wanting exclusive stuff is so that they can mark up the price and re-sell.
Defeats the purpose in my opinion.
Let people, who are willing to pay for it, get one.
Keyboards dont need to start following the artisan scene.
Damn, I didn't even think of it from the capitalist angle. That's so true and it disgusts me even more. Ew, ew, ew! >:D
I wholeheartedly agree here.
Post by: Steezus on Sun, 17 January 2016, 14:50:03
Kinda annoyed that it was 30 but then raised to 80 because of whatever reason. Really wanted it due to the exclusivity and meaning of it but felt that it's going to lose some of that because of the amount. Obviously there's no pulling back to 30 but still going to go ahead with it.
The only reason I can see people wanting exclusive stuff is so that they can mark up the price and re-sell.
Defeats the purpose in my opinion.
Let people, who are willing to pay for it, get one.
Keyboards dont need to start following the artisan scene.
Damn, I didn't even think of it from the capitalist angle. That's so true and it disgusts me even more. Ew, ew, ew! >:D
I wholeheartedly agree here.
But think of all the monies I can have selling my boards? :(
Post by: alienman82 on Sun, 17 January 2016, 16:17:47
Post by: RichieRo on Sun, 17 January 2016, 17:17:56
Post by: xondat on Sun, 17 January 2016, 19:07:10
Post by: elton5354 on Sun, 17 January 2016, 19:28:50
Post by: Zapheo on Sun, 17 January 2016, 19:32:29
Ok I think this is enough orders. I will stop adding orders from here on out.
Congrats to everyone who got in!
Post by: tkpresent on Sun, 17 January 2016, 22:13:26
I've just found that my order number has been changed from #80 to #81???!!!
Why??????????????
Post by: Steezus on Sun, 17 January 2016, 22:17:36
What?
I've just found that my order number has been changed from #80 to #81???!!!
Why??????????????
Pretty sure you just looked at it wrong, never saw you at #80
Post by: Zapheo on Sun, 17 January 2016, 22:19:50
What?
I've just found that my order number has been changed from #80 to #81???!!!
Why??????????????
Pretty sure you just looked at it wrong, never saw you at #80
That's weird because I'm pretty sure I got in at #79 and now it's showing me at #80.
Post by: Steezus on Sun, 17 January 2016, 22:22:08
What?
I've just found that my order number has been changed from #80 to #81???!!!
Why??????????????
Pretty sure you just looked at it wrong, never saw you at #80
That's weird because I'm pretty sure I got in at #79 and now it's showing me at #80.
Oh yeah you're right, maybe an order was altered.
Post by: KaminKevCrew on Sun, 17 January 2016, 22:22:49
He definitely got moved up. I was order 62 and now I'm 63.What?
I've just found that my order number has been changed from #80 to #81???!!!
Why??????????????
Pretty sure you just looked at it wrong, never saw you at #80
That's weird because I'm pretty sure I got in at #79 and now it's showing me at #80.
Oh yeah you're right, maybe an order was altered.
Post by: Steezus on Sun, 17 January 2016, 22:28:50
He definitely got moved up. I was order 62 and now I'm 63.What?
I've just found that my order number has been changed from #80 to #81???!!!
Why??????????????
Pretty sure you just looked at it wrong, never saw you at #80
That's weird because I'm pretty sure I got in at #79 and now it's showing me at #80.
Oh yeah you're right, maybe an order was altered.
Yeah my guess is that either an order was altered or elton missed somebody.
Post by: tkpresent on Sun, 17 January 2016, 22:33:35
He definitely got moved up. I was order 62 and now I'm 63.What?
I've just found that my order number has been changed from #80 to #81???!!!
Why??????????????
Pretty sure you just looked at it wrong, never saw you at #80
That's weird because I'm pretty sure I got in at #79 and now it's showing me at #80.
Oh yeah you're right, maybe an order was altered.
Yeah my guess is that either an order was altered or elton missed somebody.
I guess so.
The thing is that I was so happy because I was just #80.
Post by: c4103 on Sun, 17 January 2016, 22:45:08
Post by: duckness on Mon, 18 January 2016, 00:26:18
Any of you know there I can pick up some stabilizers for this board?
7bit stocks some (http://"http://deskthority.net/group-buys-f50/cherry-mx-taking-pre-orders-t2760.html")(get the PCB set + a spacebar). There is also a potential GB for transparent stabs in Q3 this year by zeal (http://"https://geekhack.org/index.php?topic=78155.0")
Post by: E3E on Mon, 18 January 2016, 02:28:54
He definitely got moved up. I was order 62 and now I'm 63.What?
I've just found that my order number has been changed from #80 to #81???!!!
Why??????????????
Pretty sure you just looked at it wrong, never saw you at #80
That's weird because I'm pretty sure I got in at #79 and now it's showing me at #80.
Oh yeah you're right, maybe an order was altered.
Yeah my guess is that either an order was altered or elton missed somebody.
I guess so.
The thing is that I was so happy because I was just #80.
Yo man, ask Elton. I'm sure he should be able to slot you in since you were originally #80. It'd be a little unfair if you missed out because some odd technicality.
Post by: henz on Mon, 18 January 2016, 04:14:23
Post by: limitz on Mon, 18 January 2016, 04:43:53
Post by: xondat on Mon, 18 January 2016, 07:16:17
Post by: joey on Mon, 18 January 2016, 07:34:28
2 UK orders, I find that quite strange.Why?
Post by: xondat on Mon, 18 January 2016, 07:35:55
2 UK orders, I find that quite strange.Why?
Dunno, suppose there's like 10 of us in the UK.
Post by: joey on Mon, 18 January 2016, 07:41:40
I wasn't sure if you thought 2 was a lot or not! :P2 UK orders, I find that quite strange.Why?
Dunno, suppose there's like 10 of us in the UK.
Post by: 64rky on Mon, 18 January 2016, 08:37:13
Any of you know there I can pick up some stabilizers for this board?
I ordered some from: http://winkeyless.kr/
Their shipping is pricey, but if you email them they have other options. They are also good at responding.
Post by: 64rky on Mon, 18 January 2016, 08:38:33
What?
I've just found that my order number has been changed from #80 to #81???!!!
Why??????????????
Pretty sure you just looked at it wrong, never saw you at #80
That's weird because I'm pretty sure I got in at #79 and now it's showing me at #80.
Yup, I went from #31 to #32... Maybe one was accidentally missed.
Post by: nickheller on Mon, 18 January 2016, 08:40:18
Post by: KaminKevCrew on Mon, 18 January 2016, 09:50:26
What?Talk to Elton and see if you can get in. If you can't, I'd be willing to give my spot to you.
I've just found that my order number has been changed from #80 to #81???!!!
Why??????????????
PM me if you can't get in!
Post by: c4103 on Mon, 18 January 2016, 10:20:49
Any of you know there I can pick up some stabilizers for this board?
7bit stocks some (http://"http://deskthority.net/group-buys-f50/cherry-mx-taking-pre-orders-t2760.html")(get the PCB set + a spacebar). There is also a potential GB for transparent stabs in Q3 this year by zeal (http://"https://geekhack.org/index.php?topic=78155.0")
Transparent stabs would be awesome! I'll keep my eye out for that. Just ordered a batch of 65g plate mount zealios for this last night.
Post by: tkpresent on Mon, 18 January 2016, 10:46:18
What?Talk to Elton and see if you can get in. If you can't, I'd be willing to give my spot to you.
I've just found that my order number has been changed from #80 to #81???!!!
Why??????????????
PM me if you can't get in!
Really? That sounds so sweet!
But I guess your spot is #63 which is much better than mine.
I've sent a PM to Elton and waiting for his response. I'll see.
Thanks anyway, KaminKevCrew!
Post by: joostflux on Mon, 18 January 2016, 10:51:14
Post by: KaminKevCrew on Mon, 18 January 2016, 10:57:32
For sure! I'd totally be willing to give you mine if Elton is absolutely limited to 80 for the first two runs!What?Talk to Elton and see if you can get in. If you can't, I'd be willing to give my spot to you.
I've just found that my order number has been changed from #80 to #81???!!!
Why??????????????
PM me if you can't get in!
Really? That sounds so sweet!
But I guess your spot is #63 which is much better than mine.
I've sent a PM to Elton and waiting for his response. I'll see.
Thanks anyway, KaminKevCrew!
Post by: alienman82 on Mon, 18 January 2016, 12:40:19
Post by: xondat on Mon, 18 January 2016, 12:59:08
Post by: beltet on Mon, 18 January 2016, 15:25:31
Post by: Steezus on Mon, 18 January 2016, 15:26:46
I can't reach the document anymore, anyone with the same problem?
Working fine for me.
Post by: romevi on Mon, 18 January 2016, 15:31:57
I can't reach the document anymore, anyone with the same problem?
Working fine for me.
Same. Maybe Elton was updating something at the moment?
Post by: beltet on Mon, 18 January 2016, 16:06:22
I can't reach the document anymore, anyone with the same problem?
Working fine for me.
Same. Maybe Elton was updating something at the moment?
Strange... Maybe it's because I'm on my phone. My PSU on my computer broke down two days ago. Anyone willing to check what number I have ATM? Thinking about the bump everyone experienced.
Post by: blighty on Mon, 18 January 2016, 16:08:27
Strange... Maybe it's because I'm on my phone. My PSU on my computer broke down two days ago. Anyone willing to check what number I have ATM? Thinking about the bump everyone experienced.You are 79/91. Looks like 3 groups of 30 + elton's board? :thumb:
Post by: romevi on Mon, 18 January 2016, 16:08:42
I can't reach the document anymore, anyone with the same problem?
Working fine for me.
Same. Maybe Elton was updating something at the moment?
Strange... Maybe it's because I'm on my phone. My PSU on my computer broke down two days ago. Anyone willing to check what number I have ATM? Thinking about the bump everyone experienced.
79
[attachimg=1]
Post by: beltet on Mon, 18 January 2016, 16:30:36
I can't reach the document anymore, anyone with the same problem?
Working fine for me.
Same. Maybe Elton was updating something at the moment?
Strange... Maybe it's because I'm on my phone. My PSU on my computer broke down two days ago. Anyone willing to check what number I have ATM? Thinking about the bump everyone experienced.
79
(Attachment Link)
Aaah great! Thanks mates!
Post by: merlin64 on Mon, 18 January 2016, 18:44:12
1. PCB supports PCB mount switches?
2. Plate supports switch top removal?
Post by: Steezus on Mon, 18 January 2016, 18:45:51
Anyone know if....
1. PCB supports PCB mount switches?
2. Plate supports switch top removal?
1. Yes
2. No
Post by: alienman82 on Mon, 18 January 2016, 18:47:49
Post by: E3E on Mon, 18 January 2016, 18:51:34
Anyone know if....
1. PCB supports PCB mount switches?
2. Plate supports switch top removal?
I do believe the PCB will be mounted to the top bezel like the Orion v2, so that would make mounting switches to the bare PCB without a plate impossible.
Post by: ccc24 on Mon, 18 January 2016, 20:19:00
Post by: Steezus on Mon, 18 January 2016, 20:32:24
Anyone know if....
1. PCB supports PCB mount switches?
2. Plate supports switch top removal?
1. Yes
2. No
Not so sure because if it's like the Orion you need a plate
Not so sure what? All of Duck's PCBs support PCB mounted switches, most PCBs in general do nowadays. A plate is just to add rigidity, you can use a plate and PCB mounted switches.
Post by: killerbolt on Mon, 18 January 2016, 20:49:58
What he meant was that while you can use PCB mount switches, you cannot use the board without the plate as the PCB is attached to the plate only, like the Orion and most Kustoms.Anyone know if....
1. PCB supports PCB mount switches?
2. Plate supports switch top removal?
1. Yes
2. No
Not so sure because if it's like the Orion you need a plate
Not so sure what? All of Duck's PCBs support PCB mounted switches, most PCBs in general do nowadays. A plate is just to add rigidity, you can use a plate and PCB mounted switches.
Post by: Steezus on Mon, 18 January 2016, 21:04:44
What he meant was that while you can use PCB mount switches, you cannot use the board without the plate as the PCB is attached to the plate only, like the Orion and most Kustoms.Anyone know if....
1. PCB supports PCB mount switches?
2. Plate supports switch top removal?
1. Yes
2. No
Not so sure because if it's like the Orion you need a plate
Not so sure what? All of Duck's PCBs support PCB mounted switches, most PCBs in general do nowadays. A plate is just to add rigidity, you can use a plate and PCB mounted switches.
Oh ok then that is correct, the plate is necessary because that is what is screwed into the top half. PCB mounted switches still work though but the plate has to be used.
Post by: FranksNewLiver on Mon, 18 January 2016, 21:42:54
Post by: Steezus on Mon, 18 January 2016, 22:40:53
The bump down is from one person going from one board to two boards. That shouldn't be allowed. My first order was prior to their second order, their second order should be at the bottom unless multiple boards does not affect the order number. Then the order numbers should be adjusted accordingly.
We don't know all the details but I agree that if they just messaged elton now then their second order should be at the end. Elton could've missed a pm or messed something up.
Post by: kenshinjeff on Tue, 19 January 2016, 02:01:13
Post by: Steezus on Tue, 19 January 2016, 02:06:31
Hi guys, still a korean keyboard virgin here, would I be able to program or script the front LEDs that's under the keycaps? Or is that already pre-programmed?
If you're talking about in-switch LEDs then you'll be able to program the brightness and how they turn on whether it's constant, flashing, flash on keypress, etc.
Post by: kenshinjeff on Tue, 19 January 2016, 06:34:49
If you're talking about in-switch LEDs then you'll be able to program the brightness and how they turn on whether it's constant, flashing, flash on keypress, etc.
Ah yes, you're right, I was referring to in switch LEDs. How would I go about doing that? Is there a windows app or something?
Post by: Steezus on Tue, 19 January 2016, 11:44:04
If you're talking about in-switch LEDs then you'll be able to program the brightness and how they turn on whether it's constant, flashing, flash on keypress, etc.
Ah yes, you're right, I was referring to in switch LEDs. How would I go about doing that? Is there a windows app or something?
In O2D keymapper that Duck has for his boards, you'll be able to assign keys to allow you to change said options.
He may come out with another thread for the new Octagon but here is the last one. http://duck0113.tistory.com/115
Post by: Kalopsia on Tue, 19 January 2016, 16:22:16
Post by: Steezus on Tue, 19 January 2016, 16:23:11
So its closed now? Thought the deadline was 1st of february :eek: Wanted to get in on this!
There was a lot more orders than expected.
Post by: Kalopsia on Tue, 19 January 2016, 16:28:19
Post by: nguyenkimtam on Tue, 19 January 2016, 16:42:17
Yeah , that's will make this Octagon v2 not rare haha, too much Octagon V2 on geekhack. Also there will be some from the Korean groupbuy :mad:So its closed now? Thought the deadline was 1st of february :eek: Wanted to get in on this!
There was a lot more orders than expected.
Post by: Steezus on Tue, 19 January 2016, 16:47:57
Yeah , that's will make this Octagon v2 not rare haha, too much Octagon V2 on geekhack. Also there will be some from the Korean groupbuy :mad:So its closed now? Thought the deadline was 1st of february :eek: Wanted to get in on this!
There was a lot more orders than expected.
Who gives a **** whether it's rare or not. There's still going to be ~80 boards on geekhack, that's plenty rare compared to any other retail board and other customs such as winkeyless and gon. I personally think it's kind of pretty damn selfish if you want less people to enjoy a board as good as this.
Post by: KetchyKech on Tue, 19 January 2016, 17:04:02
Yeah , that's will make this Octagon v2 not rare haha, too much Octagon V2 on geekhack. Also there will be some from the Korean groupbuy :mad:So its closed now? Thought the deadline was 1st of february :eek: Wanted to get in on this!
There was a lot more orders than expected.
Who gives a **** whether it's rare or not. There's still going to be ~80 boards on geekhack, that's plenty rare compared to any other retail board and other customs such as winkeyless and gon. I personally think it's kind of pretty damn selfish if you want less people to enjoy a board as good as this.
LightSaver v3 for every1 plz :-*
Post by: Steezus on Tue, 19 January 2016, 17:05:55
Yeah , that's will make this Octagon v2 not rare haha, too much Octagon V2 on geekhack. Also there will be some from the Korean groupbuy :mad:So its closed now? Thought the deadline was 1st of february :eek: Wanted to get in on this!
There was a lot more orders than expected.
Who gives a **** whether it's rare or not. There's still going to be ~80 boards on geekhack, that's plenty rare compared to any other retail board and other customs such as winkeyless and gon. I personally think it's kind of pretty damn selfish if you want less people to enjoy a board as good as this.
LightSaver v3 for every1 plz :-*
There will still be limited amounts because Duck will only take on as much as he's comfortable with, given the amount of popularity he's getting I wouldn't be surprised if he comes out with 100+.
Post by: nguyenkimtam on Tue, 19 January 2016, 17:09:03
I don't selfish about it . I mean that if that not have a large quantities , people will feel lucky when have it and more care about it ( maybe feel respectful) . Also if too many that may not have a good quality as less quantity (also long time to make it ). That's just my opinion so please don't feel angry about itWho gives a **** whether it's rare or not. There's still going to be ~80 boards on geekhack, that's plenty rare compared to any other retail board and other customs such as winkeyless and gon. I personally think it's kind of pretty damn selfish if you want less people to enjoy a board as good as this.Yeah , that's will make this Octagon v2 not rare haha, too much Octagon V2 on geekhack. Also there will be some from the Korean groupbuy :mad:So its closed now? Thought the deadline was 1st of february :eek: Wanted to get in on this!
There was a lot more orders than expected.
Post by: Steezus on Tue, 19 January 2016, 17:18:03
I don't selfish about it . I mean that if that not have a large quantities , people will feel lucky when have it and more care about it. Also if too many that may not have a good quality as less quantity (also long time to make it ). That's just my opinion so please don't feel angry about itWho gives a **** whether it's rare or not. There's still going to be ~80 boards on geekhack, that's plenty rare compared to any other retail board and other customs such as winkeyless and gon. I personally think it's kind of pretty damn selfish if you want less people to enjoy a board as good as this.Yeah , that's will make this Octagon v2 not rare haha, too much Octagon V2 on geekhack. Also there will be some from the Korean groupbuy :mad:So its closed now? Thought the deadline was 1st of february :eek: Wanted to get in on this!
There was a lot more orders than expected.
I'm not angry at you at all, I completely understand about concerns for quality but that's why I feel that Duck will only take on as much as he is comfortable with. I personally would love if everybody got away from all that retail nonsense and had a board like this to type on, it truly is wonderful. My Jane is 1 of 20, Jane CE 1 of 25, Lightsaver v2 1 of 30(in GH), and Orion v2 1 of 60(in GH) but I don't see them being any more special that less of them have been made.
Post by: nguyenkimtam on Tue, 19 January 2016, 17:22:58
I also want everybody have a great board for them. Just concern about the quality. And also hope that won't take a long time like the Orion V2 :rolleyes: :rolleyes:I don't selfish about it . I mean that if that not have a large quantities , people will feel lucky when have it and more care about it. Also if too many that may not have a good quality as less quantity (also long time to make it ). That's just my opinion so please don't feel angry about itWho gives a **** whether it's rare or not. There's still going to be ~80 boards on geekhack, that's plenty rare compared to any other retail board and other customs such as winkeyless and gon. I personally think it's kind of pretty damn selfish if you want less people to enjoy a board as good as this.Yeah , that's will make this Octagon v2 not rare haha, too much Octagon V2 on geekhack. Also there will be some from the Korean groupbuy :mad:So its closed now? Thought the deadline was 1st of february :eek: Wanted to get in on this!
There was a lot more orders than expected.
I'm not angry at you at all, I completely understand about concerns for quality but that's why I feel that Duck will only take on as much as he is comfortable with. I personally would love if everybody got away from all that retail nonsense and had a board like this to type on, it truly is wonderful. My Jane is 1 of 20, Jane CE 1 of 25, Lightsaver v2 1 of 30(in GH), and Orion v2 1 of 60(in GH) but I don't see them being any more special that less of them have been made.
Post by: Steezus on Tue, 19 January 2016, 17:24:15
I also want everybody have a great board for them. Just concern about the quality. And also hope that won't take a long time like the Orion V2 :rolleyes: :rolleyes:I don't selfish about it . I mean that if that not have a large quantities , people will feel lucky when have it and more care about it. Also if too many that may not have a good quality as less quantity (also long time to make it ). That's just my opinion so please don't feel angry about itWho gives a **** whether it's rare or not. There's still going to be ~80 boards on geekhack, that's plenty rare compared to any other retail board and other customs such as winkeyless and gon. I personally think it's kind of pretty damn selfish if you want less people to enjoy a board as good as this.Yeah , that's will make this Octagon v2 not rare haha, too much Octagon V2 on geekhack. Also there will be some from the Korean groupbuy :mad:So its closed now? Thought the deadline was 1st of february :eek: Wanted to get in on this!
There was a lot more orders than expected.
I'm not angry at you at all, I completely understand about concerns for quality but that's why I feel that Duck will only take on as much as he is comfortable with. I personally would love if everybody got away from all that retail nonsense and had a board like this to type on, it truly is wonderful. My Jane is 1 of 20, Jane CE 1 of 25, Lightsaver v2 1 of 30(in GH), and Orion v2 1 of 60(in GH) but I don't see them being any more special that less of them have been made.
Yeah I hear ya there, 9 months was pretty damn long for the Orion. Especially when the estimated time was 2 months. :confused:
Post by: nguyenkimtam on Tue, 19 January 2016, 17:27:25
Actually i have joined in Korea group buy so i think mine will arrive faster , still join in GH group buy because want another color to mix :cool: :cool:I also want everybody have a great board for them. Just concern about the quality. And also hope that won't take a long time like the Orion V2 :rolleyes: :rolleyes:I don't selfish about it . I mean that if that not have a large quantities , people will feel lucky when have it and more care about it. Also if too many that may not have a good quality as less quantity (also long time to make it ). That's just my opinion so please don't feel angry about itWho gives a **** whether it's rare or not. There's still going to be ~80 boards on geekhack, that's plenty rare compared to any other retail board and other customs such as winkeyless and gon. I personally think it's kind of pretty damn selfish if you want less people to enjoy a board as good as this.Yeah , that's will make this Octagon v2 not rare haha, too much Octagon V2 on geekhack. Also there will be some from the Korean groupbuy :mad:So its closed now? Thought the deadline was 1st of february :eek: Wanted to get in on this!
There was a lot more orders than expected.
I'm not angry at you at all, I completely understand about concerns for quality but that's why I feel that Duck will only take on as much as he is comfortable with. I personally would love if everybody got away from all that retail nonsense and had a board like this to type on, it truly is wonderful. My Jane is 1 of 20, Jane CE 1 of 25, Lightsaver v2 1 of 30(in GH), and Orion v2 1 of 60(in GH) but I don't see them being any more special that less of them have been made.
Yeah I hear ya there, 9 months was pretty damn long for the Orion. Especially when the estimated time was 2 months. :confused:
Post by: jshane on Tue, 19 January 2016, 18:50:17
I don't selfish about it . I mean that if that not have a large quantities , people will feel lucky when have it and more care about it. Also if too many that may not have a good quality as less quantity (also long time to make it ). That's just my opinion so please don't feel angry about itWho gives a **** whether it's rare or not. There's still going to be ~80 boards on geekhack, that's plenty rare compared to any other retail board and other customs such as winkeyless and gon. I personally think it's kind of pretty damn selfish if you want less people to enjoy a board as good as this.Yeah , that's will make this Octagon v2 not rare haha, too much Octagon V2 on geekhack. Also there will be some from the Korean groupbuy :mad:So its closed now? Thought the deadline was 1st of february :eek: Wanted to get in on this!
There was a lot more orders than expected.
I'm not angry at you at all, I completely understand about concerns for quality but that's why I feel that Duck will only take on as much as he is comfortable with. I personally would love if everybody got away from all that retail nonsense and had a board like this to type on, it truly is wonderful. My Jane is 1 of 20, Jane CE 1 of 25, Lightsaver v2 1 of 30(in GH), and Orion v2 1 of 60(in GH) but I don't see them being any more special that less of them have been made.
So when are you giving away all your boards except one, Steezus?
You seem irritated at the idea anyone would "collect" keyboards because it would mean some poor soul out there isn't able to "enjoy" the experience. I mean, you can't honestly say you type on all of those boards at once, right? And if they're all high quality, why do you need so many? Wouldn't it be more in-line with your philosophy to give them away (or sell them at your cost) so that less fortunate people could enjoy those items?
This is the second time in this single runaway thread I've seen someone attacked and ostracized because they expressed dissatisfaction that it will not be as limited run as those that preceded it and its disgusting because it's coming from collectors of artisan keycaps and limited run keyboards... You can have an opinion but don't proudly flaunt hypocrisy in the process.
Who cares whether it's rare or not, you ask? I do. Other people here do. You do, apparently.
Am I selfish because I care about rarity? Well, I own a single 60% (Duck Poker), a TKL I made myself (custom aluminum case), and wanted to add a 75% to the collection to round out the only boards I am interested in or would even use... If that makes me selfish, what does a guy with 4 limited run keyboards (and more on the way, proudly displayed in the signature) qualify as?
I'd make a crack about wearing out those keyboards posting crap that doesn't matter in these forums, but its none of my business how you spend your money, use your possessions, or the rationale that influenced those decisions. Just like it isn't any of yours to anyone else.
Post by: Steezus on Tue, 19 January 2016, 19:11:11
I don't selfish about it . I mean that if that not have a large quantities , people will feel lucky when have it and more care about it. Also if too many that may not have a good quality as less quantity (also long time to make it ). That's just my opinion so please don't feel angry about itWho gives a **** whether it's rare or not. There's still going to be ~80 boards on geekhack, that's plenty rare compared to any other retail board and other customs such as winkeyless and gon. I personally think it's kind of pretty damn selfish if you want less people to enjoy a board as good as this.Yeah , that's will make this Octagon v2 not rare haha, too much Octagon V2 on geekhack. Also there will be some from the Korean groupbuy :mad:So its closed now? Thought the deadline was 1st of february :eek: Wanted to get in on this!
There was a lot more orders than expected.
I'm not angry at you at all, I completely understand about concerns for quality but that's why I feel that Duck will only take on as much as he is comfortable with. I personally would love if everybody got away from all that retail nonsense and had a board like this to type on, it truly is wonderful. My Jane is 1 of 20, Jane CE 1 of 25, Lightsaver v2 1 of 30(in GH), and Orion v2 1 of 60(in GH) but I don't see them being any more special that less of them have been made.
So when are you giving away all your boards except one, Steezus?
You seem irritated at the idea anyone would "collect" keyboards because it would mean some poor soul out there isn't able to "enjoy" the experience. I mean, you can't honestly say you type on all of those boards at once, right? And if they're all high quality, why do you need so many? Wouldn't it be more in-line with your philosophy to give them away (or sell them at your cost) so that less fortunate people could enjoy those items?
This is the second time in this single runaway thread I've seen someone attacked and ostracized because they expressed dissatisfaction that it will not be as limited run as those that preceded it and its disgusting because it's coming from collectors of artisan keycaps and limited run keyboards... You can have an opinion but don't proudly flaunt hypocrisy in the process.
Who cares whether it's rare or not, you ask? I do. Other people here do. You do, apparently.
Am I selfish because I care about rarity? Well, I own a single 60% (Duck Poker), a TKL I made myself (custom aluminum case), and wanted to add a 75% to the collection to round out the only boards I am interested in or would even use... If that makes me selfish, what does a guy with 4 limited run keyboards (and more on the way, proudly displayed in the signature) qualify as?
I'd make a crack about wearing out those keyboards posting crap that doesn't matter in these forums, but its none of my business how you spend your money, use your possessions, or the rationale that influenced those decisions. Just like it isn't any of yours to anyone else.
Lol calm down and check your facts bud. What does me having to give away my boards do with anything?
I currently have two keyboards in my possession and I rotate them on a daily basis. I'm not irritated at somebody wanting to collect keyboards, I don't have a problem with that at all. I just don't understand the reasoning of wanting the amount of orders to be decreased to increase the rarity.
Did I ever say that I cared about boards being rare? Simply put, no. I buy these boards because I like the quality of them and have actually put them to use. I have multiple computers that I work at and places to travel hence why I have multiple boards, I also like to have a variety of switches to type on for various purposes.
I'm not saying you're selfish for caring about rarity, however if you want the amount of orders to be less just so you can say your board is rare then yes, you are being selfish. "Proudly displayed in the signature", lol just lol, I create build logs in order to help out other users when it comes to creating their first custom because that's how I learned to build my first keyboard. I like to add updates showing ways that I've found are best in order to fix your board up whether keycap light bleed, anodization scratch fix, etc. The real question is what the hell does rarity do for you? The fact that you can stroke yourself because you have a board that other people don't? A board being rare does not make it any better to type on, it's just for bragging rights. I enjoy the boards for what they are, the quality and engineering put into them. I'm a sucker for full aluminum boards, I don't like anything else. There aren't many options out there so I take what I can, I'm sorry I have more money to spend than you. I'm such a terrible person aren't I because I'd prefer that Duck makes more boards so that others can enjoy the experience of a quality board that he makes. If I was in it for collecting then I would've been in this buy as well.
Post by: tuco on Tue, 19 January 2016, 19:29:08
Post by: E3E on Tue, 19 January 2016, 20:27:26
Yeah , that's will make this Octagon v2 not rare haha, too much Octagon V2 on geekhack. Also there will be some from the Korean groupbuy :mad:So its closed now? Thought the deadline was 1st of february :eek: Wanted to get in on this!
There was a lot more orders than expected.
This mentality is so stupid. Ugh. Heavens forbid if you have something that "everyone" else has. That instantly makes it less special. It shows that you value less of the craftsmanship that goes into something and more so the scarcity of it, which can ALSO be artificially altered and limited. That is just...
I guess I should feel special that I have a Lightpad and an Octagon, the latter of which there were only 27 orders for. I don't care though, lol.
Anwyay, I have to apologize. This tangent and all of the related posts should not be what's discussed here.
Post by: Steezus on Tue, 19 January 2016, 20:29:52
Yeah , that's will make this Octagon v2 not rare haha, too much Octagon V2 on geekhack. Also there will be some from the Korean groupbuy :mad:So its closed now? Thought the deadline was 1st of february :eek: Wanted to get in on this!
There was a lot more orders than expected.
This mentality is so stupid. Ugh.
Careful now, jshane will jump down your throat.
Post by: nguyenkimtam on Tue, 19 January 2016, 20:31:44
That's normal with many people, also that's my opinion , please read all my comment after this comment. I don't know who are you , you don't have a right to told anybody stupid. You are nothing at all. I don't want to make a war so please stopYeah , that's will make this Octagon v2 not rare haha, too much Octagon V2 on geekhack. Also there will be some from the Korean groupbuy :mad:So its closed now? Thought the deadline was 1st of february :eek: Wanted to get in on this!
There was a lot more orders than expected.
This mentality is so stupid. Ugh.
Post by: E3E on Tue, 19 January 2016, 20:34:50
Yeah , that's will make this Octagon v2 not rare haha, too much Octagon V2 on geekhack. Also there will be some from the Korean groupbuy :mad:So its closed now? Thought the deadline was 1st of february :eek: Wanted to get in on this!
There was a lot more orders than expected.
This mentality is so stupid. Ugh.
Careful now, jshane will jump down your throat.
Haha. Ehhh... My gripe isn't whether or not a GB should be open to orders in the way that GON or WKL.kr is, but more so that people are so caught up in wanting the orders list even more restricted than it already is?
80 orders? NO! I demand only the quantity immediately above my order number! I want to feel special. Why are you being so inconsiderate?
IMO, this has nothing to do with jshane's post. Every GB is limited, but it's the fact some people apparently want this board's quantity to be even MORE limited than it already is--artificially restricted to appease to some stupid draw to rarity.
Post by: 64rky on Tue, 19 January 2016, 20:35:57
Apologies in advance if I'm asking dumb questions?
Few questions:
- are the batches in 30's or 40's, I thought I saw elton say 40 + 40 +,..? But the final number is 91?
- why did my number go from 31 to 32? Thought I might be in the first batch, but if it's 30 I definitely won't (30 + 1 for elton)
- are invoices still on the 1st Feb, or is that gonna BA sooner now the ordering is closed?
Thanks in advance :)
Post by: E3E on Tue, 19 January 2016, 20:36:17
That's normal with many people, also that's my opinion , please read all my comment after this comment. I don't know who are you , you don't have a right to told anybody stupid. You are nothing at all. I don't want to make a war so please stopYeah , that's will make this Octagon v2 not rare haha, too much Octagon V2 on geekhack. Also there will be some from the Korean groupbuy :mad:So its closed now? Thought the deadline was 1st of february :eek: Wanted to get in on this!
There was a lot more orders than expected.
This mentality is so stupid. Ugh.
I don't know who you are aside from what you show, and I wasn't calling you stupid. I was calling the mentality of seeking rarity over simply enjoying a quality board stupid. That is all. Enjoy the keyboard, not the number.
But yes, sir. I am nothing. Thank you. Have a good one. :)
Lastly, to clarify, if your concerns are in how quality might be affected by a large quantity, that is far more understandable than simply wanting lower quantities out of some greater sense of significance just because less were produced.
Post by: Steezus on Tue, 19 January 2016, 20:39:17
Ah, so orders are closed now, crazy now quick those orders came in right?
Apologies in advance if I'm asking dumb questions?
Few questions:
- are the batches in 30's or 40's, I thought I saw elton say 40 + 40 +,..? But the final number is 91?
- why did my number go from 31 to 32? Thought I might be in the first batch, but if it's 30 I definitely won't (30 + 1 for elton)
- are invoices still on the 1st Feb, or is that gonna BA sooner now the ordering is closed?
Thanks in advance :)
Batches are in 40, I believe people jumped up a number is because somebody added a board to their order. Deadline for invoices is February 7th.
Post by: 64rky on Tue, 19 January 2016, 20:46:31
Ah, so orders are closed now, crazy now quick those orders came in right?
Apologies in advance if I'm asking dumb questions?
Few questions:
- are the batches in 30's or 40's, I thought I saw elton say 40 + 40 +,..? But the final number is 91?
- why did my number go from 31 to 32? Thought I might be in the first batch, but if it's 30 I definitely won't (30 + 1 for elton)
- are invoices still on the 1st Feb, or is that gonna BA sooner now the ordering is closed?
Thanks in advance :)
Batches are in 40, I believe people jumped up a number is because somebody added a board to their order. Deadline for invoices is February 7th.
Thanks, you are Mr knowledge :)
Post by: ccc24 on Tue, 19 January 2016, 20:47:54
And invoices haven't been sent out yet have they?
Post by: Steezus on Tue, 19 January 2016, 20:48:41
Ah, so orders are closed now, crazy now quick those orders came in right?
Apologies in advance if I'm asking dumb questions?
Few questions:
- are the batches in 30's or 40's, I thought I saw elton say 40 + 40 +,..? But the final number is 91?
- why did my number go from 31 to 32? Thought I might be in the first batch, but if it's 30 I definitely won't (30 + 1 for elton)
- are invoices still on the 1st Feb, or is that gonna BA sooner now the ordering is closed?
Thanks in advance :)
Batches are in 40, I believe people jumped up a number is because somebody added a board to their order. Deadline for invoices is February 7th.
Thanks, you are Mr knowledge :)
Haha thank you, I try to help out where I can. ;)
Post by: Dreamre on Tue, 19 January 2016, 20:56:30
Post by: Steezus on Tue, 19 January 2016, 20:57:06
Let's get back on topic here. This is a GB for the purposes of a keyboard, nothing more, nothing less.
It's kind of been back on topic already.
Post by: Zapheo on Tue, 19 January 2016, 20:58:33
Ah, so orders are closed now, crazy now quick those orders came in right?
Apologies in advance if I'm asking dumb questions?
Few questions:
- are the batches in 30's or 40's, I thought I saw elton say 40 + 40 +,..? But the final number is 91?
- why did my number go from 31 to 32? Thought I might be in the first batch, but if it's 30 I definitely won't (30 + 1 for elton)
- are invoices still on the 1st Feb, or is that gonna BA sooner now the ordering is closed?
Thanks in advance :)
Batches are in 40, I believe people jumped up a number is because somebody added a board to their order. Deadline for invoices is February 7th.
Thanks, you are Mr knowledge :)
Haha thank you, I try to help out where I can. ;)
Geez it feels like every other day someone is trying to start drama (cough jshane cough). I for one appreciate Steezus contributing to this thread and answering pretty much everyone's questions. I know you've helped myself, and I'm sure countless others who have frequented this thread. Don't let these keyboard warriors get to you, man. :)
Post by: Steezus on Tue, 19 January 2016, 21:02:49
Ah, so orders are closed now, crazy now quick those orders came in right?
Apologies in advance if I'm asking dumb questions?
Few questions:
- are the batches in 30's or 40's, I thought I saw elton say 40 + 40 +,..? But the final number is 91?
- why did my number go from 31 to 32? Thought I might be in the first batch, but if it's 30 I definitely won't (30 + 1 for elton)
- are invoices still on the 1st Feb, or is that gonna BA sooner now the ordering is closed?
Thanks in advance :)
Batches are in 40, I believe people jumped up a number is because somebody added a board to their order. Deadline for invoices is February 7th.
Thanks, you are Mr knowledge :)
Haha thank you, I try to help out where I can. ;)
Geez it feels like every other day someone is trying to start drama (cough jshane cough). I for one appreciate Steezus contributing to this thread and answering pretty much everyone's questions. I know you've helped myself, and I'm sure countless others who have frequented this thread. Don't let these keyboard warriors get to you, man. :)
I appreciate it but it's no big deal, probably just some troll.
But what Dreamre said let's keep this thread about the Octagon now. Just a little tip to people since I regret it from the Orion v2 buy, pick up the flat acrylic bottom. For only $22 you can't beat it and it looks so good when the board is fully built and LEDs on.
Post by: E3E on Tue, 19 January 2016, 21:06:56
Let's get back on topic here. This is a GB for the purposes of a keyboard, nothing more, nothing less.
It's kind of been back on topic already.
Word! Yep, I'm definitely stoked to be in this GB, though I'm really unsure what will become of my v1. The differences between the two, especially in plate-mounting styles will certainly make me more inclined to keep the original, as well as the little "OCTAGON" nameplate that juts out an actually creates an irregular octagon out of the otherwise rectangular shape of the board, haha. The stickers were actually pretty unique, if not novel.
This one isn't going to be too much different than the first, just in Silver and Blue Grey to go with GMK SNES (so hoping the next launch of that set goes through), with clicky clear switches (vintage MX whites) in Zealio housings. Steez has probably seen me babble about my plans for this board tons of times.
I'll probably use a straight cable for it, maybe just a plain black USB cable to allude to the cables of the SNES controllers.
I did want to get a red version with a flat bottom and either wait for a 75% Alps PCB to come around (or commission one from Clueboard whenever Skully's services are open), or take a drill to the Octagon PCB and "alpsify" it, lol.
Yes, cringe in horror! Haha. But yeah, I wanted an Alps 75%. Red with a flat acrylic bottom and Duck feet would've been my choice there.
I can't afford that either way, Alps plans or not. I'm already having a Lightpad Alps plate designed so I can transition my Lightpad to the Alps side for some blue Alps number crunching goodness. That'll probably be expensive since I plan to get the plate made out of CF.
I'm honestly surprised at how many orders this GB has gotten. Has the community really grown that much in a year? I STILL haven't made my first anniversary here yet. That'd be in March! So much has happened since then!
Post by: KetchyKech on Tue, 19 January 2016, 21:07:28
More
Exclusivity is a factor when considering the overall worth an item has to someone, theres no denying that -- as that notion is applicable to almost any platform, input devices included. It can enhance a user's experience through the satisfaction they derive from that exclusivity -- I think the majority of keyboard enthusiasts value exclusivity, albeit not uniformly.
The issue most likely, in my view, is that when users express their dismay that perhaps their desire for exclusivity won't be satiated
---it comes off as incredibly selfish in a thread presumably full of users wishing to have joined in time. It's pretty easy for one to garner distaste among his peers by gloating and simultaneously wishing for their exclusion.
nothing wrong with valuing rarity... its just sensitivity goes a long way :thumb:
That being said, i personally don't think anyone has crossed into the realm of being deemed an "insensitive jerk" :p
The issue most likely, in my view, is that when users express their dismay that perhaps their desire for exclusivity won't be satiated
---it comes off as incredibly selfish in a thread presumably full of users wishing to have joined in time. It's pretty easy for one to garner distaste among his peers by gloating and simultaneously wishing for their exclusion.
nothing wrong with valuing rarity... its just sensitivity goes a long way :thumb:
That being said, i personally don't think anyone has crossed into the realm of being deemed an "insensitive jerk" :p
edit: Ohhh boy, wont add fuel to da fire :P added spoilers to my take on exclusivity
edit2:
Quote
Silver and Blue Grey to go with GMK SNES
Umm.. wow, that set is probably perfect for the blue-grey color. Now im regretting not joining that massdrop for it! :-[
Post by: E3E on Tue, 19 January 2016, 21:34:10
MoreExclusivity is a factor when considering the overall worth an item has to someone, theres no denying that -- as that notion is applicable to almost any platform, input devices included. It can enhance a user's experience through the satisfaction they derive from that exclusivity -- I think the majority of keyboard enthusiasts value exclusivity, albeit not uniformly.
The issue most likely, in my view, is that when users express their dismay that perhaps their desire for exclusivity won't be satiated
---it comes off as incredibly selfish in a thread presumably full of users wishing to have joined in time. It's pretty easy for one to garner distaste among his peers by gloating and simultaneously wishing for their exclusion.
nothing wrong with valuing rarity... its just sensitivity goes a long way :thumb:
That being said, i personally don't think anyone has crossed into the realm of being deemed an "insensitive jerk" :p
edit: Ohhh boy, wont add fuel to da fire :P added spoilers to my take on exclusivity
edit2:
QuoteSilver and Blue Grey to go with GMK SNES
Umm.. wow, that set is probably perfect for the blue-grey color. Now im regretting not joining that massdrop for it! :-[
!!! - Don't feel too bad, Kech. The drop wasn't successful, unfortunately. We're all hoping for it to go through on the relaunch, whenever that happens!
But yeah, I know right? Silver and Blue Grey to go with the light and dark grey of SNES. I feel like it'd be a great analog!
Spoiler for more talk about exclusivity stuff (also, I'm really sleepy and probably shouldn't be trying to talk about much in this current state of mind, haha):
More
I totally get appreciating exclusivity by the way, but not making it your entire reason for owning something. Like, my FAME blue Alps keyboard for instance--not even Tai Hao has an example in their headquarters, as I've heard from Daniel Beardsmore, where they several other different models with blue Alps there, but not this one. Pretty low serial number as well!
It turned out to be a very rare keyboard, and that does make me happy, but that is not why I bought it--I had no idea! It was entirely for practical purposes, to replace another metal-bottomed blue Alps board I accidentally bricked. :(
I -don't- use it these days because I have some pristine Hebrew doubleshots on it and I don't want to shine the caps. Plus, I have other Alps boards I can enjoy! :D The Leading Edge DC-3014 has been a favorite lately. ^-^ So the FAME is pretty much the only board I have that has turned into more of a collection piece.
But yeah, several boards I own are rather limited or hard to find, but that was never my motive for buying them.
Octagon v1? I wanted it because I thought it'd go perfect with Jukebox when I saw a red one for sale on Zeal's website.
Lightpad? What better to go with the Octagon than a Lightpad. I just so happened to get offered one after posting various places! Black is also the more popular color as well, which just happened by chance in my case. I wanted silver to be honest, but now black has grown on me--ultimately, I do want to get it reanodized in red to match my Hammer Alps board and the Octagon v1. We shall see.
Some of the Alps boards I have are less common variants of more common boards. The DC-3014 isn't terribly rare, but it isn't common, but it does have blue Alps and NKRO in an ANSI 101 layout, which was my main draw to it!
I really don't have a ginormous collection. I'm pretty frugal with things--I really don't have too much cash to drop on things.
I think my most prized board is the Hammer Alps custom Duck Eagle I built. Definitely. <3
It turned out to be a very rare keyboard, and that does make me happy, but that is not why I bought it--I had no idea! It was entirely for practical purposes, to replace another metal-bottomed blue Alps board I accidentally bricked. :(
I -don't- use it these days because I have some pristine Hebrew doubleshots on it and I don't want to shine the caps. Plus, I have other Alps boards I can enjoy! :D The Leading Edge DC-3014 has been a favorite lately. ^-^ So the FAME is pretty much the only board I have that has turned into more of a collection piece.
But yeah, several boards I own are rather limited or hard to find, but that was never my motive for buying them.
Octagon v1? I wanted it because I thought it'd go perfect with Jukebox when I saw a red one for sale on Zeal's website.
Lightpad? What better to go with the Octagon than a Lightpad. I just so happened to get offered one after posting various places! Black is also the more popular color as well, which just happened by chance in my case. I wanted silver to be honest, but now black has grown on me--ultimately, I do want to get it reanodized in red to match my Hammer Alps board and the Octagon v1. We shall see.
Some of the Alps boards I have are less common variants of more common boards. The DC-3014 isn't terribly rare, but it isn't common, but it does have blue Alps and NKRO in an ANSI 101 layout, which was my main draw to it!
I really don't have a ginormous collection. I'm pretty frugal with things--I really don't have too much cash to drop on things.
I think my most prized board is the Hammer Alps custom Duck Eagle I built. Definitely. <3
Post by: Steezus on Tue, 19 January 2016, 21:35:54
QuoteSilver and Blue Grey to go with GMK SNES
Umm.. wow, that set is probably perfect for the blue-grey color. Now im regretting not joining that massdrop for it! :-[
Well you're in luck because the drop failed to me moq, it was due to bad timing right after the holidays so a rerun is planned.
Post by: Zapheo on Tue, 19 January 2016, 21:36:18
Let's get back on topic here. This is a GB for the purposes of a keyboard, nothing more, nothing less.
It's kind of been back on topic already.
Word! Yep, I'm definitely stoked to be in this GB, though I'm really unsure what will become of my v1. The differences between the two, especially in plate-mounting styles will certainly make me more inclined to keep the original, as well as the little "OCTAGON" nameplate that juts out an actually creates an irregular octagon out of the otherwise rectangular shape of the board, haha. The stickers were actually pretty unique, if not novel.
This one isn't going to be too much different than the first, just in Silver and Blue Grey to go with GMK SNES (so hoping the next launch of that set goes through), with clicky clear switches (vintage MX whites) in Zealio housings. Steez has probably seen me babble about my plans for this board tons of times.
I'll probably use a straight cable for it, maybe just a plain black USB cable to allude to the cables of the SNES controllers.
I did want to get a red version with a flat bottom and either wait for a 75% Alps PCB to come around (or commission one from Clueboard whenever Skully's services are open), or take a drill to the Octagon PCB and "alpsify" it, lol.
Yes, cringe in horror! Haha. But yeah, I wanted an Alps 75%. Red with a flat acrylic bottom and Duck feet would've been my choice there.
I can't afford that either way, Alps plans or not. I'm already having a Lightpad Alps plate designed so I can transition my Lightpad to the Alps side for some blue Alps number crunching goodness. That'll probably be expensive since I plan to get the plate made out of CF.
I'm honestly surprised at how many orders this GB has gotten. Has the community really grown that much in a year? I STILL haven't made my first anniversary here yet. That'd be in March! So much has happened since then!
E3 it sounds like you're going to have a pretty sweet board on your hands.
Post by: E3E on Tue, 19 January 2016, 22:20:56
Let's get back on topic here. This is a GB for the purposes of a keyboard, nothing more, nothing less.
It's kind of been back on topic already.
Word! Yep, I'm definitely stoked to be in this GB, though I'm really unsure what will become of my v1. The differences between the two, especially in plate-mounting styles will certainly make me more inclined to keep the original, as well as the little "OCTAGON" nameplate that juts out an actually creates an irregular octagon out of the otherwise rectangular shape of the board, haha. The stickers were actually pretty unique, if not novel.
This one isn't going to be too much different than the first, just in Silver and Blue Grey to go with GMK SNES (so hoping the next launch of that set goes through), with clicky clear switches (vintage MX whites) in Zealio housings. Steez has probably seen me babble about my plans for this board tons of times.
I'll probably use a straight cable for it, maybe just a plain black USB cable to allude to the cables of the SNES controllers.
I did want to get a red version with a flat bottom and either wait for a 75% Alps PCB to come around (or commission one from Clueboard whenever Skully's services are open), or take a drill to the Octagon PCB and "alpsify" it, lol.
Yes, cringe in horror! Haha. But yeah, I wanted an Alps 75%. Red with a flat acrylic bottom and Duck feet would've been my choice there.
I can't afford that either way, Alps plans or not. I'm already having a Lightpad Alps plate designed so I can transition my Lightpad to the Alps side for some blue Alps number crunching goodness. That'll probably be expensive since I plan to get the plate made out of CF.
I'm honestly surprised at how many orders this GB has gotten. Has the community really grown that much in a year? I STILL haven't made my first anniversary here yet. That'd be in March! So much has happened since then!
E3 it sounds like you're going to have a pretty sweet board on your hands.
Hey hey! You might be right! ;)
But hey, you're not alone! Out of all 91 orders, I've noticed that yours is the only other individual order with the same dual tone color scheme that I selected, silver and blue grey, though you went for the aluminum plate whereas I went for stainless, hehe.
Looks we'll both have some pretty sweet boards!
Post by: roostrc0gburn on Tue, 19 January 2016, 22:53:28
QuoteSilver and Blue Grey to go with GMK SNES
Umm.. wow, that set is probably perfect for the blue-grey color. Now im regretting not joining that massdrop for it! :-[
Well you're in luck because the drop failed to me moq, it was due to bad timing right after the holidays so a rerun is planned.
hoping a rerun of GMK Classic Beige comes first, tho! need it for this board
Post by: Steezus on Tue, 19 January 2016, 22:57:00
QuoteSilver and Blue Grey to go with GMK SNES
Umm.. wow, that set is probably perfect for the blue-grey color. Now im regretting not joining that massdrop for it! :-[
Well you're in luck because the drop failed to me moq, it was due to bad timing right after the holidays so a rerun is planned.
hoping a rerun of GMK Classic Beige comes first, tho! need it for this board
In the livestream today Photekq said it's very unlikely that it'll happen, if so it'll be a something like a moogle kit.
Post by: roostrc0gburn on Tue, 19 January 2016, 23:48:35
Post by: E3E on Wed, 20 January 2016, 06:35:40
QuoteSilver and Blue Grey to go with GMK SNES
Umm.. wow, that set is probably perfect for the blue-grey color. Now im regretting not joining that massdrop for it! :-[
Well you're in luck because the drop failed to me moq, it was due to bad timing right after the holidays so a rerun is planned.
hoping a rerun of GMK Classic Beige comes first, tho! need it for this board
Hmm. Classic beige; I'd have to imagine some EnjoyPBT sets would come close to the same color scheme, so if you are alright with PBT, you can look there!
Post by: Vittra on Wed, 20 January 2016, 08:01:23
I'll have to be more vigilant in the coming months.
Post by: darkclone24 on Wed, 20 January 2016, 11:27:59
Ha. I missed this GB completely. I think I'd prefer Orion anyway, though I do have a nostalgia for the layout of the Noppoo Choc Mini I had so very long ago.
I'll have to be more vigilant in the coming months.
Leeku should be doing a 75% group buy soon.
Post by: E3E on Wed, 20 January 2016, 12:32:45
Ha. I missed this GB completely. I think I'd prefer Orion anyway, though I do have a nostalgia for the layout of the Noppoo Choc Mini I had so very long ago.
I'll have to be more vigilant in the coming months.
Leeku should be doing a 75% group buy soon.
If he'd make a 75% Alps PCB, I'd <3
Post by: c4103 on Wed, 20 January 2016, 17:20:58
Post by: Steezus on Wed, 20 January 2016, 17:22:50
Okay so I have a question. Clearly this board comes with a plate, but I see that it says to use PCB mount stabilizers? Does that mean you need to use PCB mount switches too? I ordered 100 plate mount zealios... hope I didn't order the wrong thing...
You can use PCB mounted switches but you don't have to. The PCB mounted switches just make them a little sturdier because they have two extra legs that clip into the PCB.
Post by: roostrc0gburn on Wed, 20 January 2016, 17:27:37
Post by: aaron6301 on Wed, 20 January 2016, 17:29:57
some people may need a source for pcb-mount stabs, though. i have a couple sets, so i am set. but for my personal edification as well, can someone tell us where to find them?
Originative only has 6.25u atm.
http://www.originativeco.com/collections/accessories (http://www.originativeco.com/collections/accessories)
Zeal only offers 6.25u per his website as well.
http://zealpc.net/collections/switches/products/pcb-plate-mount-cherry-stabilizers
Alternatively you can source from winkeyless.kr but I heard shipping can be quite expensive. They offer both 6.25u and 7u :thumb:
http://winkeyless.kr/product/cherry-pcb-mount-stabilizers/
Post by: c4103 on Wed, 20 January 2016, 17:30:52
Okay so I have a question. Clearly this board comes with a plate, but I see that it says to use PCB mount stabilizers? Does that mean you need to use PCB mount switches too? I ordered 100 plate mount zealios... hope I didn't order the wrong thing...
You can use PCB mounted switches but you don't have to. The PCB mounted switches just make them a little sturdier because they have two extra legs that clip into the PCB.
I see, thanks for the clarification.
Post by: 64rky on Wed, 20 January 2016, 17:38:12
some people may need a source for pcb-mount stabs, though. i have a couple sets, so i am set. but for my personal edification as well, can someone tell us where to find them?
Originative only has 6.25u atm.
http://www.originativeco.com/collections/accessories (http://www.originativeco.com/collections/accessories)
Zeal only offers 6.25u per his website as well.
http://zealpc.net/collections/switches/products/pcb-plate-mount-cherry-stabilizers
Alternatively you can source from winkeyless.kr but I heard shipping can be quite expensive. They offer both 6.25u and 7u :thumb:
http://winkeyless.kr/product/cherry-pcb-mount-stabilizers/
Emailing winkeyless will help with shipping costs. They have other options.
Post by: c4103 on Wed, 20 January 2016, 17:41:48
some people may need a source for pcb-mount stabs, though. i have a couple sets, so i am set. but for my personal edification as well, can someone tell us where to find them?
Originative only has 6.25u atm.
http://www.originativeco.com/collections/accessories (http://www.originativeco.com/collections/accessories)
Zeal only offers 6.25u per his website as well.
http://zealpc.net/collections/switches/products/pcb-plate-mount-cherry-stabilizers
Alternatively you can source from winkeyless.kr but I heard shipping can be quite expensive. They offer both 6.25u and 7u :thumb:
http://winkeyless.kr/product/cherry-pcb-mount-stabilizers/
Thanks for this info. From looking at the layout, this board uses a 6.25 unit spacebar, no? I plan on putting Granite on it so that's what I will be using. I didn't really understand the difference between PCB and plate mount switches and I ordered a **** ton of the plate mount Zealios... How much stability do PCB mount switches / stabs add? Is it worth cancelling my order and getting some PCB mount ones instead? Can I even use the plate mount stabilizers? Really I just want to keep everything consistent. This is my first custom, sorry if these are stupid questions.
Post by: aaron6301 on Wed, 20 January 2016, 17:50:13
some people may need a source for pcb-mount stabs, though. i have a couple sets, so i am set. but for my personal edification as well, can someone tell us where to find them?
Originative only has 6.25u atm.
http://www.originativeco.com/collections/accessories (http://www.originativeco.com/collections/accessories)
Zeal only offers 6.25u per his website as well.
http://zealpc.net/collections/switches/products/pcb-plate-mount-cherry-stabilizers
Alternatively you can source from winkeyless.kr but I heard shipping can be quite expensive. They offer both 6.25u and 7u :thumb:
http://winkeyless.kr/product/cherry-pcb-mount-stabilizers/
Thanks for this info. From looking at the layout, this board uses a 6.25 unit spacebar, no? I plan on putting Granite on it so that's what I will be using. I didn't really understand the difference between PCB and plate mount switches and I ordered a **** ton of the plate mount Zealios... How much stability do PCB mount switches / stabs add? Is it worth cancelling my order and getting some PCB mount ones instead? Can I even use the plate mount stabilizers? Really I just want to keep everything consistent. This is my first custom, sorry if these are stupid questions.
This PCB supports both winkey and winkeyless layouts. So, you can use either a 6.25u spacebar stab for winkey layouts or a 7u spacebar stab for winkeyless.
After a brief back and forth with Zeal, the extra stability doesn't hurt. In fact, I did exactly what your contemplating. I changed my order from plate mount to PCB mounted 65g's. If you feel that you don't need the extra legs on PCB mounted switches, you can clip them with a flush cutter (credit to Steezus for the info).
Post by: KaminKevCrew on Wed, 20 January 2016, 18:13:47
some people may need a source for pcb-mount stabs, though. i have a couple sets, so i am set. but for my personal edification as well, can someone tell us where to find them?Originative sells gold plated ones, and zeal sells both pcb and plate mounted, non gold plated stabs :)
Post by: romevi on Wed, 20 January 2016, 18:16:01
The ones Originative sells are SPRiT's, by the way.some people may need a source for pcb-mount stabs, though. i have a couple sets, so i am set. but for my personal edification as well, can someone tell us where to find them?Originative sells gold plated ones, and zeal sells both pcb and plate mounted, non gold plated stabs :)
Post by: c4103 on Wed, 20 January 2016, 18:37:03
Post by: E3E on Wed, 20 January 2016, 18:55:06
The ones Originative sells are SPRiT's, by the way.some people may need a source for pcb-mount stabs, though. i have a couple sets, so i am set. but for my personal edification as well, can someone tell us where to find them?Originative sells gold plated ones, and zeal sells both pcb and plate mounted, non gold plated stabs :)
Thanks for this information! This is very good to know now that SPRiT's GB stuff has scattered, with his springs on MechanicalKeyboards.com and now, as I've learned, his stabs on Originative/Sherry's website.
Post by: E3E on Wed, 20 January 2016, 18:57:07
Okay so I have a question. Clearly this board comes with a plate, but I see that it says to use PCB mount stabilizers? Does that mean you need to use PCB mount switches too? I ordered 100 plate mount zealios... hope I didn't order the wrong thing...
You can use PCB mounted switches but you don't have to. The PCB mounted switches just make them a little sturdier because they have two extra legs that clip into the PCB.
Not only this, but they also help ensure that the switches aren't crooked at all! Even if clipped into the plate, I've seen some crooked switches before, or at least the result of crooked switches as seen by the key caps (my Octagon being an example >W<).
Post by: alienman82 on Wed, 20 January 2016, 19:04:44
Post by: jaemzp on Wed, 20 January 2016, 20:47:32
Post by: salasource on Thu, 21 January 2016, 05:25:46
Post by: moorederodeo on Thu, 21 January 2016, 11:59:14
does anyone want my place?
I would be more than willing to take your place. Sorry it's a new account, but I literally created it just to reply to your message (I have a more established account on reddit under the same name). I've pm'ed you as well
Post by: alienman82 on Thu, 21 January 2016, 13:59:59
Post by: Steezus on Thu, 21 January 2016, 14:00:43
Such **** photoshop such hopeShow Image(http://i.imgur.com/Rk5Y1Bf.jpg)
Woah Alienman, how did you already get an Octagon v2? ;)
Post by: alienman82 on Thu, 21 January 2016, 14:12:45
Post by: mtzgr on Fri, 22 January 2016, 00:48:15
Post by: laminam on Fri, 22 January 2016, 10:56:39
Post by: joey on Fri, 22 January 2016, 11:20:52
Post by: romevi on Fri, 22 January 2016, 13:08:57
At this stage, can't people just drop out and everyone else move up?
Yeah, I think so.
Post by: Sifo on Fri, 22 January 2016, 13:11:26
Post by: E3E on Fri, 22 January 2016, 13:13:00
just so you guys know the orders have been changed to 30 + 30 because duck is unable to produce the requested volume of boards
Welp, looks like I'm knocked out of this GB! gg~
Oh well, tis money saved in the end. Thanks for the heads up, Sifo.
Post by: aaron6301 on Fri, 22 January 2016, 13:14:09
just so you guys know the orders have been changed to 30 + 30 because duck is unable to produce the requested volume of boardsDang, well I guess I just missed the cut at #61 -_-
Post by: romevi on Fri, 22 January 2016, 13:21:28
just so you guys know the orders have been changed to 30 + 30 because duck is unable to produce the requested volume of boards
Good news and bad news for me, I guess. Bad news because I missed out, good news because I missed out and now I have money to spend on other things. :-\
Post by: c4103 on Fri, 22 January 2016, 13:55:40
Post by: E3E on Fri, 22 January 2016, 13:59:24
Nooo I'm #73. Is this absolutely the case that orders beyond #60 won't be fulfilled? I ordered switches and stabs for this and would like to try and get in on something else asap if that's the case. Should I email duck about it?
As
Post by: c4103 on Fri, 22 January 2016, 14:13:54
The Duck Feet's are going to be available only in anodized silver.
Orders will be fulfilled by 40+40+...
just so you guys know the orders have been changed to 30 + 30 because duck is unable to produce the requested volume of boards
These seem to conflict. Can we get an official statement on this from duck?
Post by: romevi on Fri, 22 January 2016, 14:20:13
The Duck Feet's are going to be available only in anodized silver.
Orders will be fulfilled by 40+40+...just so you guys know the orders have been changed to 30 + 30 because duck is unable to produce the requested volume of boards
These seem to conflict. Can we get an official statement on this from duck?
elton's statement was over a week ago. Duck probably changed his mind since.
But yeah; I guess we'll have to wait 'til we hear from elton regarding the western GB.
Post by: 64rky on Fri, 22 January 2016, 14:47:11
The Duck Feet's are going to be available only in anodized silver.
Orders will be fulfilled by 40+40+...just so you guys know the orders have been changed to 30 + 30 because duck is unable to produce the requested volume of boards
These seem to conflict. Can we get an official statement on this from duck?
elton's statement was over a week ago. Duck probably changed his mind since.
But yeah; I guess we'll have to wait 'til we hear from elton regarding the western GB.
I'll just assume I am in the second batch, whatever.
Post by: Sifo on Fri, 22 January 2016, 14:49:12
Post by: c4103 on Fri, 22 January 2016, 14:51:49
Elton told me 30+30 a few days ago
Thanks Sifo. I trust you but I still emailed him for a confirmation because if I can't get in on this, I want to build an ErgoDox. I'll need to change my Granite order within the next 5 days if that's going to happen, and I want to be 100% sure that I won't be able to get one of these first.
Post by: Zedd on Fri, 22 January 2016, 15:25:16
i hope my order doesnt get abandoned :(
Post by: romevi on Fri, 22 January 2016, 15:38:54
Elton told me 30+30 a few days ago
Thanks Sifo. I trust you but I still emailed him for a confirmation because if I can't get in on this, I want to build an ErgoDox. I'll need to change my Granite order within the next 5 days if that's going to happen, and I want to be 100% sure that I won't be able to get one of these first.
lol I'm in the exact same boat.
Post by: Sifo on Fri, 22 January 2016, 15:40:27
Post by: darkclone24 on Fri, 22 January 2016, 17:45:51
Please be 40 + 40.
Post by: lawlz_xD on Fri, 22 January 2016, 18:22:26
Post by: Steezus on Fri, 22 January 2016, 18:26:24
To clarify, if it is indeed 30+30, those after 60 are out of the GB?
Yeah, there's nothing else they could do.
Post by: ccc24 on Fri, 22 January 2016, 18:50:45
Post by: ccc24 on Fri, 22 January 2016, 19:00:09
Post by: E3E on Fri, 22 January 2016, 21:51:15
well that's too bad. Guess its good news since I don't have to drop 600 bucks for this and the f77. Going to 100% now on the new model f's.
Yep, it'll free up cash for other endeavors! Like getting a carbon fiber plate made for my Lightpad so it can Alps it up, buying holtite sockets for the Lightpad and such. All that is going to cost at least $100, I'd say, but it will be so worth it.
I still need a case for my other hotswap Eagle, so there's that.
Not having a $400 keyboard expense on top of that is a good thing.
Post by: lootbag on Fri, 22 January 2016, 23:35:46
I guess I will have to keep waiting for my chance at a Duck board.
Enjoy guys!
Post by: Chewypost on Sat, 23 January 2016, 11:34:11
Post by: ccc24 on Sat, 23 January 2016, 11:37:35
Post by: Steezus on Sat, 23 January 2016, 11:41:54
Damn, I signed up for the Octagon group buy. I saw that it would be here soon, but didn't check for it. Sucks that I missed out :( Really didn't expect such low batch.
This is the highest batch of boards that Duck has ever done along with the Orion v2.
Post by: Chewypost on Sat, 23 January 2016, 11:50:40
Damn, I signed up for the Octagon group buy. I saw that it would be here soon, but didn't check for it. Sucks that I missed out :( Really didn't expect such low batch.
This is the highest batch of boards that Duck has ever done along with the Orion v2.
I see. It's good that He's able to fulfill much more than he has in the past then. I was just under the impression that it wouldn't be sub-100 order. But that's my own fault lol.
Post by: FoC_Tow on Sat, 23 January 2016, 11:57:49
Super stoked that it looks like I actually made it in after missing out on Lightsaver V2.
Also btw:
Still trying to decide if I should switch to an aluminum plate since it seems to be the most common choice.
Since there seems to be more then enough room in the case, has anyone tried using tiny o-rings in between the plate and the case? Shouldn't that in theory dampen the harder plate a little and solve any possibility of pinging issues?
Post by: Steezus on Sat, 23 January 2016, 12:13:04
Place 40 over here! :)
Super stoked that it looks like I actually made it in after missing out on Lightsaver V2.
Also btw:
Still trying to decide if I should switch to an aluminum plate since it seems to be the most common choice.
Since there seems to be more then enough room in the case, has anyone tried using tiny o-rings in between the plate and the case? Shouldn't that in theory dampen the harder plate a little and solve any possibility of pinging issues?
Brag much, lol? JK though, congrats
I don't know what you mean by putting o-rings between the plate and case since there will be a PCB there. However if you mean around the sides that wouldn't dampen a plate at all because the material of the plate itself is what gives the hardness of it.
Post by: radio_killah on Sat, 23 January 2016, 12:16:45
Post by: Steezus on Sat, 23 January 2016, 12:25:17
How many of these are actually getting made? Jeez 90+ on the order sheet? Duck is doing real well ;)
Right now it's only 60, 30+30 like the Orion v2. It was originally said to be two rounds of 40 but that has now since changed.
Post by: FoC_Tow on Sat, 23 January 2016, 12:39:52
Place 40 over here! :)
Super stoked that it looks like I actually made it in after missing out on Lightsaver V2.
Also btw:
Still trying to decide if I should switch to an aluminum plate since it seems to be the most common choice.
Since there seems to be more then enough room in the case, has anyone tried using tiny o-rings in between the plate and the case? Shouldn't that in theory dampen the harder plate a little and solve any possibility of pinging issues?
Brag much, lol? JK though, congrats
I don't know what you mean by putting o-rings between the plate and case since there will be a PCB there. However if you mean around the sides that wouldn't dampen a plate at all because the material of the plate itself is what gives the hardness of it.
Thx for the quick reply Steezus, but it doesn't really answer my question. :)
Sorry if I didn't fully explain what I mean.
To elaborate:
Since this is a two part case design, the plate is directly attached to the top half of the case by screws,
(unlike poker style cases where the pcb is attached to the case directly)
so the plate is in fact in direct contact with the case with no pcb inbetween.
(the pcb is more or less free floating and only attached to the plate itself wich again screws to the case)
I was wondering if putting o-rings on the screws that attach the plate to the case (in between where the plate normally makes contact with the case) would give the plate a more dampened feel, incase anyone has ever tried to do something similar to this?
Sorry if I made that explanation slightly complicated, but I hope the question becomes more clear now.
Edit:
If you take a closer look on the plate you will see the eight attachment points used to screw the plate to the top half of the case.
I meant using o-rings on these attachments points between plate and case.
Post by: Steezus on Sat, 23 January 2016, 12:59:57
Place 40 over here! :)
Super stoked that it looks like I actually made it in after missing out on Lightsaver V2.
Also btw:
Still trying to decide if I should switch to an aluminum plate since it seems to be the most common choice.
Since there seems to be more then enough room in the case, has anyone tried using tiny o-rings in between the plate and the case? Shouldn't that in theory dampen the harder plate a little and solve any possibility of pinging issues?
Brag much, lol? JK though, congrats
I don't know what you mean by putting o-rings between the plate and case since there will be a PCB there. However if you mean around the sides that wouldn't dampen a plate at all because the material of the plate itself is what gives the hardness of it.
Thx for the quick reply Steezus, but it doesn't really answer my question. :)
Sorry if I didn't fully explain what I mean.
To elaborate:
Since this is a two part case design, the plate is directly attached to the top half of the case by screws,
(unlike poker style cases where the pcb is attached to the case directly)
so the plate is in fact in direct contact with the case with no pcb inbetween.
(the pcb is more or less free floating and only attached to the plate itself wich again screws to the case)
I was wondering if putting o-rings on the screws that attach the plate to the case (in between where the plate normally makes contact with the case) would give the plate a more dampened feel, incase anyone has ever tried to do something similar to this?
Sorry if I made that explanation slightly complicated, but I hope the question becomes more clear now.
Edit:
If you take a closer look on the plate you will see the eight attachment points used to screw the plate to the top half of the case.
I meant using o-rings on these attachments points between plate and case.
Yeah I know how Duck's boards work, I have an Orion v2 myself. I was just confused on the question.
The plate material is what matters on the amount of flex for certain types of switches. Putting o-rings on all the screws, if possible, would just have the entire plate be a little squishy around the edges and be able to push it down but still does not give it "flex". It may dampen is around the edges but to not each individual switch.
Post by: FoC_Tow on Sat, 23 January 2016, 13:50:27
Yeah I know how Duck's boards work, I have an Orion v2 myself. I was just confused on the question.
The plate material is what matters on the amount of flex for certain types of switches. Putting o-rings on all the screws, if possible, would just have the entire plate be a little squishy around the edges and be able to push it down but still does not give it "flex". It may dampen is around the edges but to not each individual switch.
Sorry Steezus didn't realize until now my idea is probably what you referred to by around the sides.
Really appreciate your feedback especially if you have experience with Duck's board and didn't mean to sound rude or anything, I was just trying to further explain my idea and keep in mind Im not a native speaker.
So thx a lot again! :)
I might actually give the o-rings a try since I have a bunch of different sizes flying around, but Im still wondering wether to go aluminum or stick with stainless?
Do you have an aluminum Plate on your Orion? What would you recommend to go with?
Im probably just going to pick whatever your suggestion would be...
I do realize stainless would be heavier and aluminum softer, but never really had a direct comparison to go by.
Went with the angled acrylic bottom btw! =D
Post by: Steezus on Sat, 23 January 2016, 14:06:46
Yeah I know how Duck's boards work, I have an Orion v2 myself. I was just confused on the question.
The plate material is what matters on the amount of flex for certain types of switches. Putting o-rings on all the screws, if possible, would just have the entire plate be a little squishy around the edges and be able to push it down but still does not give it "flex". It may dampen is around the edges but to not each individual switch.
Sorry Steezus didn't realize until now my idea is probably what you referred to by around the sides.
Really appreciate your feedback especially if you have experience with Duck's board and didn't mean to sound rude or anything, I was just trying to further explain my idea and keep in mind Im not a native speaker.
So thx a lot again! :)
I might actually give the o-rings a try since I have a bunch of different sizes flying around, but Im still wondering wether to go aluminum or stick with stainless?
Do you have an aluminum Plate on your Orion? What would you recommend to go with?
Im probably just going to pick whatever your suggestion would be...
I do realize stainless would be heavier and aluminum softer, but never really had a direct comparison to go by.
Went with the angled acrylic bottom btw! =D
It's all good, you didn't rude or anything. :thumb:
The plates really depend on which switches you'd like to use. If you're going the linear route then stainless steel is definitely the better option imo.
I personally am using an acrylic plate in my Orion with 65g Tactile Zealios, the tactility is phenomenal but the sound is rather mute.
The aluminum is a good mix of in between where you have more rigidity, better sound, but still some flex for tactile switches and still good for linears.
Honestly I couldn't really tell you which plate to decide on unless I know which switches you're thinking about using.
Post by: beltet on Sat, 23 January 2016, 15:01:01
Hopefully there will be some changes in the future.
Post by: popkorn62 on Sat, 23 January 2016, 17:48:12
Post by: slowpokie on Sun, 24 January 2016, 00:42:47
Elton told me 30+30 a few days ago
Very sad news. This was my dream board and it looks like I'll be missing out. :(
Post by: kurtle107 on Sun, 24 January 2016, 01:13:41
Post by: FoC_Tow on Sun, 24 January 2016, 10:49:16
It's all good, you didn't rude or anything. :thumb:
The plates really depend on which switches you'd like to use. If you're going the linear route then stainless steel is definitely the better option imo.
I personally am using an acrylic plate in my Orion with 65g Tactile Zealios, the tactility is phenomenal but the sound is rather mute.
The aluminum is a good mix of in between where you have more rigidity, better sound, but still some flex for tactile switches and still good for linears.
Honestly I couldn't really tell you which plate to decide on unless I know which switches you're thinking about using.
Thx for your input again Steezus! :)
I've been using linear switches in all my recent boards, but since the Zealios GB R2 launched I'm heavily considering those for my Octagon.
Im probably going with Tactile Zealios so I'll shoot elton a PM to switch to an aluminum Plate! :thumb:
I didn't even realize the acrylic plate was actually available for the Orion btw, sounds awesome!
Ive seen some acrylic plates on the octagon pics linked in this thread, but unfortunately it doesn't seem to be available this time around.
Post by: E3E on Sun, 24 January 2016, 13:38:01
Elton told me 30+30 a few days ago
Very sad news. This was my dream board and it looks like I'll be missing out. :(
I'm just using my Octagon v1 for now, living in the moment, knowing the v2 will never be mine now! Lest I pay crazy aftermarket prices for a potential color, plate, and bottom layout I do not 100% want.
So eh, whatever. I'll live with it.
Post by: xondat on Sun, 24 January 2016, 15:43:05
Post by: E3E on Sun, 24 January 2016, 17:46:05
Don't know whether to get a LZ-RV or this - I'd feel cruel not getting this due to how many people missed out though.
Good reason. You should go for this then!
Post by: xondat on Mon, 25 January 2016, 09:15:03
Don't know whether to get a LZ-RV or this - I'd feel cruel not getting this due to how many people missed out though.
Good reason. You should go for this then!
And it'd be the only UK one, that'd make my ego get a bit bigger /s
Post by: stillzman on Mon, 25 January 2016, 19:12:52
Post by: darkclone24 on Tue, 26 January 2016, 13:48:30
Don't know whether to get a LZ-RV or this - I'd feel cruel not getting this due to how many people missed out though.
Good reason. You should go for this then!
And it'd be the only UK one, that'd make my ego get a bit bigger /s
:(
Post by: 64rky on Tue, 26 January 2016, 13:54:10
I have an orion in blue grey, wondering if I need some variation!?
What do you all think?
Post by: E3E on Tue, 26 January 2016, 14:02:41
hmmm... So I currently have the Blue Grey on order... I am now wondering if I want to change that to black?
I have an orion in blue grey, wondering if I need some variation!?
What do you all think?
Variety is the spice of life, as they say.
I was thinking of getting one of these in red like my v1 and Hammer, but I decided against it. It's boring having boards that all look the same. Go for something different!
And for that matter, when I was considering what cases to use on my two Duck Eagles PCBs, I was originally planning on buying two carbon fiber cases from HPS' project, but then the opportunity to buy a red Hammer case fell into my lap, and after consideration I went for it.
Before that, my mindset towards 60% was that they should always be super light and portable, but I stand corrected now. Heft is nice in any layout, and it doesn't even weigh enough to be unwieldy either.
In other words, two of the same is boring. I'm glad I changed it up!
Post by: KaminKevCrew on Tue, 26 January 2016, 14:08:28
I had the same opinion for heavy 60% boards, but those heavy aluminum cases are so nice to use!hmmm... So I currently have the Blue Grey on order... I am now wondering if I want to change that to black?
I have an orion in blue grey, wondering if I need some variation!?
What do you all think?
Variety is the spice of life, as they say.
I was thinking of getting one of these in red like my v1 and Hammer, but I decided against it. It's boring having boards that all look the same. Go for something different!
And for that matter, when I was considering what cases to use on my two Duck Eagles PCBs, I was originally planning on buying two carbon fiber cases from HPS' project, but then the opportunity to buy a red Hammer case fell into my lap, and after consideration I went for it.
Before that, my mindset towards 60% was that they should always be super light and portable, but I stand corrected now. Heft is nice in any layout, and it doesn't even weigh enough to be unwieldy either.
In other words, two of the same is boring. I'm glad I changed it up!
Post by: Pemdas on Tue, 26 January 2016, 14:09:36
hmmm... So I currently have the Blue Grey on order... I am now wondering if I want to change that to black?
I have an orion in blue grey, wondering if I need some variation!?
What do you all think?
I got the same color scheme as I did with my Orion v2 (blue grey top with silver bottom) I was thinking of going black this time to change it up but I think it's gonna look really cool having matching duck boards :thumb:
Post by: romevi on Tue, 26 January 2016, 14:11:20
hmmm... So I currently have the Blue Grey on order... I am now wondering if I want to change that to black?
I have an orion in blue grey, wondering if I need some variation!?
What do you all think?
There's always a black keyboard. Stick with blue-gray.
Post by: 64rky on Tue, 26 January 2016, 14:21:53
hmmm... So I currently have the Blue Grey on order... I am now wondering if I want to change that to black?
I have an orion in blue grey, wondering if I need some variation!?
What do you all think?
There's always a black keyboard. Stick with blue-gray.
Yea this is exactly why I am hesitating, although I was thinking of using either the Miami Nights, or SKIDATA set on it, the black would look cool... aaarrrggg... if only I won the powerball, I'd buy both :)
Post by: 64rky on Tue, 26 January 2016, 14:24:28
hmmm... So I currently have the Blue Grey on order... I am now wondering if I want to change that to black?
I have an orion in blue grey, wondering if I need some variation!?
What do you all think?
Variety is the spice of life, as they say.
I was thinking of getting one of these in red like my v1 and Hammer, but I decided against it. It's boring having boards that all look the same. Go for something different!
And for that matter, when I was considering what cases to use on my two Duck Eagles PCBs, I was originally planning on buying two carbon fiber cases from HPS' project, but then the opportunity to buy a red Hammer case fell into my lap, and after consideration I went for it.
Before that, my mindset towards 60% was that they should always be super light and portable, but I stand corrected now. Heft is nice in any layout, and it doesn't even weigh enough to be unwieldy either.
In other words, two of the same is boring. I'm glad I changed it up!
This is a very good point! I am slowly replacing all my non-custom boards with custom, and all my non-custom are black... so it's kind of got that stigma to it...
was even thinking of putting orange LED's on it... with vintage MX blacks... I have a Star Cluster BBv2 which will .... WHAT'S WRONG WITH ME?!?
Post by: E3E on Tue, 26 January 2016, 14:41:09
hmmm... So I currently have the Blue Grey on order... I am now wondering if I want to change that to black?
I have an orion in blue grey, wondering if I need some variation!?
What do you all think?
Variety is the spice of life, as they say.
I was thinking of getting one of these in red like my v1 and Hammer, but I decided against it. It's boring having boards that all look the same. Go for something different!
And for that matter, when I was considering what cases to use on my two Duck Eagles PCBs, I was originally planning on buying two carbon fiber cases from HPS' project, but then the opportunity to buy a red Hammer case fell into my lap, and after consideration I went for it.
Before that, my mindset towards 60% was that they should always be super light and portable, but I stand corrected now. Heft is nice in any layout, and it doesn't even weigh enough to be unwieldy either.
In other words, two of the same is boring. I'm glad I changed it up!
This is a very good point! I am slowly replacing all my non-custom boards with custom, and all my non-custom are black... so it's kind of got that stigma to it...
was even thinking of putting orange LED's on it... with vintage MX blacks... I have a Star Cluster BBv2 which will .... WHAT'S WRONG WITH ME?!?
Rainb1ood does have a great example of a stealth Octagon, and he also recently transferred the caps from that build to his Orion v2 that I helped put together for him.
Here's the Octagon. Some might find it boring, but I find it pretty sick.
(http://i.imgur.com/q9R869X.jpg)
Black has a certain subtlety to it. I like my black Lightpad a lot, but it is true, many OEM keyboards are black these days.
And since you have a black Orion, I think that's enough love for black! Go blue grey unless you really have an idea that would work best with black as opposed to any other color.
Post by: 64rky on Tue, 26 January 2016, 14:56:59
hmmm... So I currently have the Blue Grey on order... I am now wondering if I want to change that to black?
I have an orion in blue grey, wondering if I need some variation!?
What do you all think?
Variety is the spice of life, as they say.
I was thinking of getting one of these in red like my v1 and Hammer, but I decided against it. It's boring having boards that all look the same. Go for something different!
And for that matter, when I was considering what cases to use on my two Duck Eagles PCBs, I was originally planning on buying two carbon fiber cases from HPS' project, but then the opportunity to buy a red Hammer case fell into my lap, and after consideration I went for it.
Before that, my mindset towards 60% was that they should always be super light and portable, but I stand corrected now. Heft is nice in any layout, and it doesn't even weigh enough to be unwieldy either.
In other words, two of the same is boring. I'm glad I changed it up!
This is a very good point! I am slowly replacing all my non-custom boards with custom, and all my non-custom are black... so it's kind of got that stigma to it...
was even thinking of putting orange LED's on it... with vintage MX blacks... I have a Star Cluster BBv2 which will .... WHAT'S WRONG WITH ME?!?
Rainb1ood does have a great example of a stealth Octagon, and he also recently transferred the caps from that build to his Orion v2 that I helped put together for him.
Here's the Octagon. Some might find it boring, but I find it pretty sick.Show Image(http://i.imgur.com/q9R869X.jpg)
Black has a certain subtlety to it. I like my black Lightpad a lot, but it is true, many OEM keyboards are black these days.
And since you have a black Orion, I think that's enough love for black! Go blue grey unless you really have an idea that would work best with black as opposed to any other color.
That does look quite sexy, I can imagine that with the orange LED's, and the SKIDATA set on...
My Orion is Blue Grey, My Lightsaver is Gun metal grey I think, but not the blue grey...
So this would be the first black custom...
hmmmm... thanks for the advice, and pic... really does help.
Post by: E3E on Tue, 26 January 2016, 15:01:21
hmmm... So I currently have the Blue Grey on order... I am now wondering if I want to change that to black?
I have an orion in blue grey, wondering if I need some variation!?
What do you all think?
Variety is the spice of life, as they say.
I was thinking of getting one of these in red like my v1 and Hammer, but I decided against it. It's boring having boards that all look the same. Go for something different!
And for that matter, when I was considering what cases to use on my two Duck Eagles PCBs, I was originally planning on buying two carbon fiber cases from HPS' project, but then the opportunity to buy a red Hammer case fell into my lap, and after consideration I went for it.
Before that, my mindset towards 60% was that they should always be super light and portable, but I stand corrected now. Heft is nice in any layout, and it doesn't even weigh enough to be unwieldy either.
In other words, two of the same is boring. I'm glad I changed it up!
This is a very good point! I am slowly replacing all my non-custom boards with custom, and all my non-custom are black... so it's kind of got that stigma to it...
was even thinking of putting orange LED's on it... with vintage MX blacks... I have a Star Cluster BBv2 which will .... WHAT'S WRONG WITH ME?!?
Rainb1ood does have a great example of a stealth Octagon, and he also recently transferred the caps from that build to his Orion v2 that I helped put together for him.
Here's the Octagon. Some might find it boring, but I find it pretty sick.Show Image(http://i.imgur.com/q9R869X.jpg)
Black has a certain subtlety to it. I like my black Lightpad a lot, but it is true, many OEM keyboards are black these days.
And since you have a black Orion, I think that's enough love for black! Go blue grey unless you really have an idea that would work best with black as opposed to any other color.
That does look quite sexy, I can imagine that with the orange LED's, and the SKIDATA set on...
My Orion is Blue Grey, My Lightsaver is Gun metal grey I think, but not the blue grey...
So this would be the first black custom...
hmmmm... thanks for the advice, and pic... really does help.
Wow, excuse my ridiculous derp. My mind got it all mixed up. Yes, definitely shoot for black, man! I thought your boards were all black, not grey.
I'd definitely go for something different. Make yourself a sexy dark beast!
Always happy to lend my thoughts!
Post by: elton5354 on Tue, 26 January 2016, 19:06:15
Sorry for the absence..was hectic at work. Needed to travel and all.
Anyway back on topic..I haven't read the replies in this thread or in my inbox yet, but here is the most updated news I have. No more assumptions or guessing..
There will be 30 sets that are going out first and then another 30 sets will go out after. There MAY be a chance of another 30 or so depending on the time and how long this group buy will take. For now, I am only going to take 60 orders. I will put the rest on hold if you guys are still interested..
Second batch will be finished 1-2 months after the first batch and so on.
The reason for this was the schedule of other keyboards and that they weren't expecting that many orders at all; 30-40 was their max assumption of sets that would be ordered. When I said "unlimited" orders, I may have misunderstood their directions and quoted what they told me.
If you have any general questions, just reply here as I will be spending some time reading my PMs. If it's specific to your order, then PM me..
I apologize again and I hope you guys aren't upset about this.
Post by: Sifo on Tue, 26 January 2016, 19:07:23
I apologize again and I hope you guys are upset about this.
told u guys
Post by: Steezus on Tue, 26 January 2016, 19:08:51
I apologize again and I hope you guys are upset about this.
told u guys
Lol, people believed you but it's just that they didn't want to. :p
Post by: FrostyToast on Tue, 26 January 2016, 19:13:54
I apologize again and I hope you guys are upset about this.
told u guys
Lol, people believed you but it's just that they didn't want to. :p
It's not that, Sifo was trying to point out Elton's brutal savagery.
That man ain't joking around. This is what happens when Geekhack meets an unstoppable force.
Post by: Sifo on Tue, 26 January 2016, 19:15:22
ARE YOU ****ING SORRY?
Post by: popkorn62 on Tue, 26 January 2016, 19:22:27
Post by: E3E on Tue, 26 January 2016, 19:28:01
Post by: elton5354 on Tue, 26 January 2016, 20:01:02
Post by: Steezus on Tue, 26 January 2016, 20:02:14
So upset. The tears flow. Elton is tyrannous leader. Tyrannosaurus Elton. :(
Elton is just the middle man in this ordeal, if it wasn't for him then we'd be completely Duckless. ;)
Post by: E3E on Tue, 26 January 2016, 20:32:37
So upset. The tears flow. Elton is tyrannous leader. Tyrannosaurus Elton. :(
Elton is just the middle man in this ordeal, if it wasn't for him then we'd be completely Duckless. ;)
I'm kidding. I don't mind. I'm happy with my v1.
I'm more so eyeing up the VE.A as it is anyway. Alps compatible and right up my alley. :)
Oh right, and I do have a spot thanks to the every-so-kind Xondat.
I may or may not get the v2, but I will hold onto that spot for now. Since I own the v1, it sounds a bit redundant to be honest. The VE.A is more of a unique experience in comparison for me and more suited to my tastes because of its Alps compatibility and it is essentially a 75% derived layout. :D
Post by: Steezus on Tue, 26 January 2016, 20:33:34
So upset. The tears flow. Elton is tyrannous leader. Tyrannosaurus Elton. :(
Elton is just the middle man in this ordeal, if it wasn't for him then we'd be completely Duckless. ;)
I'm kidding. I don't mind. I'm happy with my v1.
I'm more so eyeing up the VE.A as it is anyway. Alps compatible and right up my alley. :)
Hell yeah! I'm definitely getting a VE.A as well, but not for alps. :p
Post by: elton5354 on Tue, 26 January 2016, 20:52:28
So upset. The tears flow. Elton is tyrannous leader. Tyrannosaurus Elton. :(
Elton is just the middle man in this ordeal, if it wasn't for him then we'd be completely Duckless. ;)
I'm kidding. I don't mind. I'm happy with my v1.
I'm more so eyeing up the VE.A as it is anyway. Alps compatible and right up my alley. :)
Hell yeah! I'm definitely getting a VE.A as well, but not for alps. :p
What is that? I can't find anything in the search function :S
Post by: lootbag on Tue, 26 January 2016, 20:53:08
Post by: Steezus on Tue, 26 January 2016, 20:54:07
So upset. The tears flow. Elton is tyrannous leader. Tyrannosaurus Elton. :(
Elton is just the middle man in this ordeal, if it wasn't for him then we'd be completely Duckless. ;)
I'm kidding. I don't mind. I'm happy with my v1.
I'm more so eyeing up the VE.A as it is anyway. Alps compatible and right up my alley. :)
Hell yeah! I'm definitely getting a VE.A as well, but not for alps. :p
What is that? I can't find anything in the search function :S
Sending you a PM so I don't derail this thread. :thumb:
Post by: xondat on Wed, 27 January 2016, 02:41:34
I ****ED UP
Post by: gnarlsagan on Wed, 27 January 2016, 09:43:25
Post by: 64rky on Wed, 27 January 2016, 09:53:04
I was originally order number 30, and now I'm 31. Did we confirm the reason for this? If it was because someone added an extra board to their order, can that person move their second board to the end of the line? Fair is fair.
I was 31 and now I am 32, I think everyone up to 31 is in the first batch as elton doesn't count himself as part of first 30, I may be wrong... But if I am right, the I just shifted from the first to second batch :(
Post by: Vittra on Wed, 27 January 2016, 09:54:53
From a logistics/workflow perspective, it makes sense that Duck would want to complete both boards at the same time for a person and send them off together to avoid any extra issues that could arise (lost/damaged packages, making a mistake, etc).
Post by: blighty on Wed, 27 January 2016, 10:00:04
I was originally order number 30, and now I'm 31. Did we confirm the reason for this? If it was because someone added an extra board to their order, can that person move their second board to the end of the line? Fair is fair.
LOL. It would not be fair for rooster to pay for shipping twice, would it?
Post by: 64rky on Wed, 27 January 2016, 10:07:09
I was originally order number 30, and now I'm 31. Did we confirm the reason for this? If it was because someone added an extra board to their order, can that person move their second board to the end of the line? Fair is fair.
LOL. It would not be fair for rooster to pay for shipping twice, would it?
Arguably if I modified my order to two boards, would I knock number 60 off the list? That wouldn't be right? Additional boards should be treated as adding orders regardless of who they're going to. If I wanted to modify my order and add another board, then that order should be at the back of the list?
Post by: blighty on Wed, 27 January 2016, 10:14:54
I was originally order number 30, and now I'm 31. Did we confirm the reason for this? If it was because someone added an extra board to their order, can that person move their second board to the end of the line? Fair is fair.
LOL. It would not be fair for rooster to pay for shipping twice, would it?
Arguably if I modified my order to two boards, would I knock number 60 off the list? That wouldn't be right? Additional boards should be treated as adding orders regardless of who they're going to. If I wanted to modify my order and add another board, then that order should be at the back of the list?
If orders were still open, I would say add one if you want it. Not like there was a rule against it or anything.
Post by: Dansor on Wed, 27 January 2016, 10:27:48
I was thinking the TX1800, when it arrives, would be my temporary ultimate board, but the more I look at those light-diffusing inserts... wow....
Congrats to everyone in on this one. I will forever begrudge you this board :thumb:
Post by: gnarlsagan on Wed, 27 January 2016, 10:49:54
I was originally order number 30, and now I'm 31. Did we confirm the reason for this? If it was because someone added an extra board to their order, can that person move their second board to the end of the line? Fair is fair.
LOL. It would not be fair for rooster to pay for shipping twice, would it?
I would agree under the circumstances of a normal sale where there is no order limit. This is not such a sale. Orders were limited, and each order was logged in the order in which it was received. So if I added an additional board now, I would most definitely expect to have it added at the end of the list, and not with my current order to the detriment of everyone behind me.
It's not a huge deal, but I would be a lot more frustrated if I was number 60 bumped to 61 because one board was not enough for someone.
Post by: roostrc0gburn on Wed, 27 January 2016, 12:49:42
I was originally order number 30, and now I'm 31. Did we confirm the reason for this? If it was because someone added an extra board to their order, can that person move their second board to the end of the line? Fair is fair.
LOL. It would not be fair for rooster to pay for shipping twice, would it?
I would agree under the circumstances of a normal sale where there is no order limit. This is not such a sale. Orders were limited, and each order was logged in the order in which it was received. So if I added an additional board now, I would most definitely expect to have it added at the end of the list, and not with my current order to the detriment of everyone behind me.
It's not a huge deal, but I would be a lot more frustrated if I was number 60 bumped to 61 because one board was not enough for someone.
ok, so i'm busted. come clean time...
my original order was basically two full keyboards (minus a second top plate). I later added a second top-plate, and Elton created a second order - two complete keyboards. I pm'd him when people started freaking out about orders getting bumped and told him that the second top plate could be moved to later order - that would be fair to everyone. Then, more orders were opened up. Then, those people were told that maybe their orders won't go through. I am still willing to let my second top plate get put at the end of the line, as long as it is still in line.
At this point, though, where's the end? I definitely put in my second plate order before the first 60, so that means someone is getting bumped...
sorry i didn't mean to create all this hassle. i didnt think elton would bump everyone back in order to meet my request.
<edited for clarity>
Post by: gnarlsagan on Wed, 27 January 2016, 19:44:19
I was originally order number 30, and now I'm 31. Did we confirm the reason for this? If it was because someone added an extra board to their order, can that person move their second board to the end of the line? Fair is fair.
LOL. It would not be fair for rooster to pay for shipping twice, would it?
I would agree under the circumstances of a normal sale where there is no order limit. This is not such a sale. Orders were limited, and each order was logged in the order in which it was received. So if I added an additional board now, I would most definitely expect to have it added at the end of the list, and not with my current order to the detriment of everyone behind me.
It's not a huge deal, but I would be a lot more frustrated if I was number 60 bumped to 61 because one board was not enough for someone.
ok, so i'm busted. come clean time...
my original order was basically two full keyboards (minus a second top plate). I later added a second top-plate, and Elton created a second order - two complete keyboards. I pm'd him when people started freaking out about orders getting bumped and told him that the second top plate could be moved to later order - that would be fair to everyone. Then, more orders were opened up. Then, those people were told that maybe their orders won't go through. I am still willing to let my second top plate get put at the end of the line, as long as it is still in line.
At this point, though, where's the end? I definitely put in my second plate order before the first 60, so that means someone is getting bumped...
sorry i didn't mean to create all this hassle. i didnt think elton would bump everyone back in order to meet my request.
<edited for clarity>
Cool, thanks for the clarification. Doesn't sound like your fault at all. I'm honestly not too bummed about missing the first shipment, since I'm waiting for Round 6 caps that will go on this board. I have a feeling I'll have plenty of time (2017? lol).
I have an unrelated open question: does anyone know if other 75% plates are compatible with the Octagon? I don't forsee it being an issue, but I'm thinking of grabbing a Red Scarf plate or something if I can manage it, so that it supports opening the switches without desoldering.
Post by: E3E on Wed, 27 January 2016, 22:32:43
I have an unrelated open question: does anyone know if other 75% plates are compatible with the Octagon? I don't forsee it being an issue, but I'm thinking of grabbing a Red Scarf plate or something if I can manage it, so that it supports opening the switches without desoldering.
Because the Octagon v2 is going to use a top-mounted plate design, IE, screwed into the top bezel and now down to the base, you'd have to find one that mounts in a similar way with all the same or at least enough of the same mounting positions and make sure that it is aligned correctly with the top bezel.
These plates are more complicated than in tray style cases like for most 60% and the Octagon v1.
Quick check to glimpse the plate style of the RS84 and, no, it will not work for the v2. It would for the v1, however,
Post by: Steezus on Thu, 28 January 2016, 00:46:14
Post by: Steezus on Thu, 28 January 2016, 10:23:20
My Orion is up for sale in my classifieds thread. :thumb:
Oops thought this was the Orion thread last night lol
Post by: E3E on Thu, 28 January 2016, 11:35:02
My Orion is up for sale in my classifieds thread. :thumb:
Oops thought this was the Orion thread last night lol
Lol, it's okay man, so did I.
:))
Post by: Ail on Thu, 28 January 2016, 15:03:52
I'm guessing due to popularity they will run this again? Why is the buy limit so low, small production facility?
Post by: 64rky on Thu, 28 January 2016, 15:12:09
FFFFFFFFfffffff, this is an awesome looking board. I NEED IT!
I'm guessing due to popularity they will run this again? Why is the buy limit so low, small production facility?
Yea dude, I missed the V1, they'll come round again for v3. This order number is more than the last....
Also keep an eye here, it's likely that someone might sell theirs, etc... That's how I got my Orion.
Post by: E3E on Thu, 28 January 2016, 15:21:28
FFFFFFFFfffffff, this is an awesome looking board. I NEED IT!
I'm guessing due to popularity they will run this again? Why is the buy limit so low, small production facility?
Yea dude, I missed the V1, they'll come round again for v3. This order number is more than the last....
Also keep an eye here, it's likely that someone might sell theirs, etc... That's how I got my Orion.
v1 Master Race >:C
Lol, nah this one is sick. It's gonna be hard deciding this or the VE.A; I wish I had deeper pockets. I feel like I want my v1 to have a younger brother, but the VE.A is like a 75% w/ Alps compatibility, a split ergo board, and 10 extra keys to the left like an F AT layout.
Bwaah!
Post by: 64rky on Thu, 28 January 2016, 15:39:44
FFFFFFFFfffffff, this is an awesome looking board. I NEED IT!
I'm guessing due to popularity they will run this again? Why is the buy limit so low, small production facility?
Yea dude, I missed the V1, they'll come round again for v3. This order number is more than the last....
Also keep an eye here, it's likely that someone might sell theirs, etc... That's how I got my Orion.
v1 Master Race >:C
Lol, nah this one is sick. It's gonna be hard deciding this or the VE.A; I wish I had deeper pockets. I feel like I want my v1 to have a younger brother, but the VE.A is like a 75% w/ Alps compatibility, a split ergo board, and 10 extra keys to the left like an F AT layout.
Bwaah!
Link?
Post by: E3E on Thu, 28 January 2016, 18:16:07
FFFFFFFFfffffff, this is an awesome looking board. I NEED IT!
I'm guessing due to popularity they will run this again? Why is the buy limit so low, small production facility?
Yea dude, I missed the V1, they'll come round again for v3. This order number is more than the last....
Also keep an eye here, it's likely that someone might sell theirs, etc... That's how I got my Orion.
v1 Master Race >:C
Lol, nah this one is sick. It's gonna be hard deciding this or the VE.A; I wish I had deeper pockets. I feel like I want my v1 to have a younger brother, but the VE.A is like a 75% w/ Alps compatibility, a split ergo board, and 10 extra keys to the left like an F AT layout.
Bwaah!
Link?
PM'd as to not derail the thread. GB won't be until mid-February.
Post by: Butter on Thu, 28 January 2016, 20:15:51
FFFFFFFFfffffff, this is an awesome looking board. I NEED IT!
I'm guessing due to popularity they will run this again? Why is the buy limit so low, small production facility?
Yea dude, I missed the V1, they'll come round again for v3. This order number is more than the last....
Also keep an eye here, it's likely that someone might sell theirs, etc... That's how I got my Orion.
v1 Master Race >:C
Lol, nah this one is sick. It's gonna be hard deciding this or the VE.A; I wish I had deeper pockets. I feel like I want my v1 to have a younger brother, but the VE.A is like a 75% w/ Alps compatibility, a split ergo board, and 10 extra keys to the left like an F AT layout.
Bwaah!
Link?
PM'd as to not derail the thread. GB won't be until mid-February.
I'll like a PM as well, Can;t find anything about VE.A
Post by: blighty on Thu, 28 January 2016, 20:28:45
Post by: E3E on Thu, 28 January 2016, 20:30:25
The GB for that should be happening in mid-February. Keep an eye out for it.
(http://i.imgur.com/Yyw4Jh1.jpg)
Not much more information than that, really!
All of you asking for the link should go look for information yourself. It's not as if I'm part of some secret club. Use the search function. All the info you need is on the forum.
There is no current GB or IC. There's no link. It's just an upcoming thing. Keep your pants on, guys. :thumb:
Post by: Steezus on Thu, 28 January 2016, 20:39:34
I feel like I've opened up pandora's box, lol.
The GB for that should be happening in mid-February. Keep an eye out for it.Show Image(http://i.imgur.com/Yyw4Jh1.jpg)
Not much more information than that, really!
All of you asking for the link should go look for information yourself. It's not as if I'm part of some secret club. Use the search function. All the info you need is on the forum.
There is no current GB or IC. There's no link. It's just an upcoming thing. Keep your pants on, guys. :thumb:
I would like to mention that the first GB was a secret/private one. There is no guarantee that it will open up to international orders either. The only reason why I'm interested is that I have a friend that can proxy for me. Don't give up hope, there still may be a chance.
Post by: KetchyKech on Thu, 28 January 2016, 20:40:04
suppose time will tell...
Anyway-- the time for invoices is nearly upon us :cool:
Post by: E3E on Thu, 28 January 2016, 20:53:31
I feel like I've opened up pandora's box, lol.
The GB for that should be happening in mid-February. Keep an eye out for it.Show Image(http://i.imgur.com/Yyw4Jh1.jpg)
Not much more information than that, really!
All of you asking for the link should go look for information yourself. It's not as if I'm part of some secret club. Use the search function. All the info you need is on the forum.
There is no current GB or IC. There's no link. It's just an upcoming thing. Keep your pants on, guys. :thumb:
I would like to mention that the first GB was a secret/private one. There is no guarantee that it will open up to international orders either. The only reason why I'm interested is that I have a friend that can proxy for me. Don't give up hope, there still may be a chance.
Yep, no guarantee or clear understanding how this one will be run. I too am in a similar situation though in having an avenue. Still, I really dislike the idea of hijacking this thread with all this.
But yeah, this next one might also be private or it might be open. We don't know.
Post by: roostrc0gburn on Thu, 28 January 2016, 23:28:14
(http://kerrystith.com/wp-content/uploads/2012/08/train-derailment.jpg)
Post by: xondat on Fri, 29 January 2016, 04:23:00
OMFGShow Image(http://kerrystith.com/wp-content/uploads/2012/08/train-derailment.jpg)
Pretty mad derailment. I made a discussion thread for the VE.A here: https://geekhack.org/index.php?topic=79183
Let's not clutter other threads with something different :p
Post by: darkclone24 on Fri, 29 January 2016, 05:06:43
Come on guys, 4 more people drop out! Please?
Post by: 64rky on Fri, 29 January 2016, 05:48:05
Post by: aaron6301 on Fri, 29 January 2016, 14:54:21
Post by: Steezus on Fri, 29 January 2016, 14:58:57
Oooo, I have gone from 32 to 31.....noooow, does that mean I am in the first or second batch given elton is 1?
I'm pretty sure that you're still in the second batch. They still need to make a board for Elton so he would be in the first batch.
Post by: pmh1410 on Sat, 30 January 2016, 00:57:30
Post by: popkorn62 on Sat, 30 January 2016, 01:00:18
Post by: ika on Sat, 30 January 2016, 01:18:38
Post by: HannahPeach on Sat, 30 January 2016, 06:47:10
with the Duck feet will fit the aluminium bottom?
Post by: E3E on Sat, 30 January 2016, 10:02:07
Do you guys think that the acrylic windows that are coming
with the Duck feet will fit the aluminium bottom?
They look to be the same size, but I'm not sure if they'll be removable. But yeah, I think they'd fit.
Post by: GL1TCH3D on Sat, 30 January 2016, 10:03:57
Post by: HannahPeach on Sat, 30 January 2016, 10:06:27
Do you guys think that the acrylic windows that are coming
with the Duck feet will fit the aluminium bottom?
They look to be the same size, but I'm not sure if they'll be removable. But yeah, I think they'd fit.
I honestly don't enjoy the design of the aluminium bottom without the acrylic windows.. really makes the board perfect, to me at least.
Post by: Steezus on Sat, 30 January 2016, 10:09:59
Do you guys think that the acrylic windows that are coming
with the Duck feet will fit the aluminium bottom?
They look to be the same size, but I'm not sure if they'll be removable. But yeah, I think they'd fit.
I personally think they're pointless and defeats the whole purpose of the cutout in the aluminum bottom. The cutout is meant to give a spot for you to easily pick up the board to move around, filling it up with an acrylic piece no longer allows that.
I honestly don't enjoy the design of the aluminium bottom without the acrylic windows.. really makes the board perfect, to me at least.
Post by: E3E on Sat, 30 January 2016, 11:56:23
I personally think they're pointless and defeats the whole purpose of the cutout in the aluminum bottom. The cutout is meant to give a spot for you to easily pick up the board to move around, filling it up with an acrylic piece no longer allows that.
They might give less gripping area, but the ridge that Ducks' newer designs have along the top bezel aids in being able to grip the board.
Now in his v1 designs like the Lightsaver and Lightpad, well... Yeah, it has entirely smooth sides, so that would be troublesome, but not with these designs.
Post by: ika on Sat, 30 January 2016, 12:05:24
Post by: Steezus on Sat, 30 January 2016, 12:05:59
Wait, were acrylic inserts not included? I was under the impression that they were included with the alu bottom.
I don't think I've ever seen them included in any of his group buys. Pretty easy to make them yourself though.
Post by: HannahPeach on Sat, 30 January 2016, 12:10:05
Wait, were acrylic inserts not included? I was under the impression that they were included with the alu bottom.
I think it's not too late to just shoot elton a private message and ask him about that.
Post by: E3E on Sat, 30 January 2016, 13:22:16
Wait, were acrylic inserts not included? I was under the impression that they were included with the alu bottom.
I don't think I've ever seen them included in any of his group buys. Pretty easy to make them yourself though.
They never were included, no. The Viper/Eagle GB is the only group buy that has had a concurrent GB for the inserts, AFAIK. I'm less aware of the Lightsaver V1/V2 or Orion v1 era though.
The Octagon v1 wiggled in and some people got their inserts. I've got two sets for my Octagon, one frosted, one clear.
I've also indeed made my own by hand with a dremel and some tinted polycarbonate for my Lightpad.
(http://i.imgur.com/MnrvWHk.jpg)
(http://i.imgur.com/j40PvGu.jpg)
-
That said, Elton has shared the files for the acrylic inserts so you can easily go get them CNC'd somewhere.
Post by: HannahPeach on Sat, 30 January 2016, 13:23:23
Wait, were acrylic inserts not included? I was under the impression that they were included with the alu bottom.
I don't think I've ever seen them included in any of his group buys. Pretty easy to make them yourself though.
They never were included, no. The Viper/Eagle GB is the only group buy that has had a concurrent GB for the inserts, AFAIK. I'm less aware of the Lightsaver V1/V2 or Orion v1 era though.
The Octagon v1 wiggled in and some people got their inserts. I've got two sets for my Octagon, one frosted, one clear.
I've also indeed made my own by hand with a dremel and some tinted polycarbonate for my Lightpad.Show Image(http://i.imgur.com/MnrvWHk.jpg)Show Image(http://i.imgur.com/j40PvGu.jpg)
-
That said, Elton has shared the files for the acrylic inserts so you can easily go get them CNC'd somewhere.
The inserts for the lightpad turned out pretty sexy.
Post by: alienman82 on Sat, 30 January 2016, 13:24:38
Post by: E3E on Sat, 30 January 2016, 13:26:51
The inserts for the lightpad turned out pretty sexy.
Thanks man. They aren't perfect but they did come out pretty nice! :D
I didn't realize the Lightpad (and Lightsaver v1) had much larger inserts compared to Duck's Orion v1 - and further v2 designs.
I was ready to use my spare set of inserts for it but then--nope, didn't fit. The tinted look is pretty unique though. I like it! It's like a pair of eyes gleeming into your soul through the darkness. :P
woah man those look really good for a dremel! You make a rig or something?
I made a visual template after taking some measurements, but I did it all by hand. The only thing that I botched up was in fusing the two pieces of poly together to make the inserts wide enough for the Lightpad.
I used too much ambroid pro weld and it created some runs down the middle. Very hard to see for the most part though.
I thought of redoing them, but it was HELL doing it all by hand like that.
Post by: elton5354 on Sun, 31 January 2016, 00:40:54
Post by: kenlee on Sun, 31 January 2016, 20:28:58
Updated all the pricing and cost in google doc. Last chance to change anything on your order before I start invoicing..
Elton, i have sent u a pm about changing my order yesterday, thanks for ur time
Post by: dakuzo on Mon, 01 February 2016, 14:52:57
Updated all the pricing and cost in google doc. Last chance to change anything on your order before I start invoicing..
Sent you a pm - Dropping out of the GB. Should make 64rky very happy ;D
Post by: 64rky on Mon, 01 February 2016, 16:11:34
Updated all the pricing and cost in google doc. Last chance to change anything on your order before I start invoicing..
Sent you a pm - Dropping out of the GB. Should make 64rky very happy ;D
And harry_nugs :D
Post by: roostrc0gburn on Mon, 01 February 2016, 16:36:36
Updated all the pricing and cost in google doc. Last chance to change anything on your order before I start invoicing..
Sent you a pm - Dropping out of the GB. Should make 64rky very happy ;D
And harry_nugs :D
oh, sorry I'm adding another keyboard to my order. you're getting bumped down again ;D
Post by: HannahPeach on Mon, 01 February 2016, 17:01:48
Updated all the pricing and cost in google doc. Last chance to change anything on your order before I start invoicing..
Sent you a pm - Dropping out of the GB. Should make 64rky very happy ;D
And harry_nugs :D
oh, sorry I'm adding another keyboard to my order. you're getting bumped down again ;D
I'd honestly pay half of your order if you would do that! LOL
Post by: roostrc0gburn on Mon, 01 February 2016, 17:09:00
Updated all the pricing and cost in google doc. Last chance to change anything on your order before I start invoicing..
Sent you a pm - Dropping out of the GB. Should make 64rky very happy ;D
And harry_nugs :D
oh, sorry I'm adding another keyboard to my order. you're getting bumped down again ;D
I'd honestly pay half of your order if you would do that! LOL
any takers on the other half?
Post by: E3E on Mon, 01 February 2016, 17:24:51
Post by: roostrc0gburn on Mon, 01 February 2016, 17:38:02
Post by: 64rky on Mon, 01 February 2016, 18:21:21
Updated all the pricing and cost in google doc. Last chance to change anything on your order before I start invoicing..
Sent you a pm - Dropping out of the GB. Should make 64rky very happy ;D
And harry_nugs :D
oh, sorry I'm adding another keyboard to my order. you're getting bumped down again ;D
Ha ha... your second board would be at the bottom of the list bro ;D
Post by: roostrc0gburn on Mon, 01 February 2016, 19:27:13
Post by: elton5354 on Mon, 01 February 2016, 22:56:57
I've sent some invoices out. I'll send more tomorrow.
:)
Post by: CornCha0s on Tue, 02 February 2016, 00:15:53
Post by: T0mb3ry on Tue, 02 February 2016, 03:41:22
(https://i.imgur.com/YdMhUh.jpg)
Post by: ctrlX on Tue, 02 February 2016, 08:29:36
Post by: Dreamre on Tue, 02 February 2016, 09:01:46
Post by: KetchyKech on Tue, 02 February 2016, 14:25:51
thanks elton :thumb:
Post by: breitling on Tue, 02 February 2016, 14:28:14
Post by: Butter on Tue, 02 February 2016, 14:38:59
Post by: Steezus on Tue, 02 February 2016, 14:39:37
Paid, The wallet hurt so much.
Wallet pain is temporary, the keyboards can't wait. ;)
Post by: alienman82 on Tue, 02 February 2016, 14:48:03
Post by: Steezus on Tue, 02 February 2016, 14:49:00
Paid, The wallet hurt so much.
Wallet pain is temporary, the keyboards can't wait. ;)
Well he'll be waiting for the board. So waiting. Yeah...
Well if he waits on the payment then there'll be board.
Post by: omgar on Tue, 02 February 2016, 17:52:40
Replied and updated all PMs and changes.
I've sent some invoices out. I'll send more tomorrow.
:)
Thanks Elton. Just paid mine :)
Post by: 64rky on Tue, 02 February 2016, 18:03:18
(https://media.giphy.com/media/Rgpqw0a5ZlbZ6/giphy.gif)
Post by: tuco on Tue, 02 February 2016, 18:07:42
Post by: E3E on Tue, 02 February 2016, 18:35:15
Post by: m1raz on Tue, 02 February 2016, 18:41:06
Post by: kenshinjeff on Tue, 02 February 2016, 19:13:19
Post by: romevi on Tue, 02 February 2016, 19:18:44
Post by: Pemdas on Tue, 02 February 2016, 19:21:17
Post by: pmh1410 on Tue, 02 February 2016, 19:39:38
Post by: kenlee on Tue, 02 February 2016, 19:42:07
Post by: GL1TCH3D on Tue, 02 February 2016, 20:21:57
Post by: nguyenkimtam on Tue, 02 February 2016, 21:17:24
Post by: hcwt on Tue, 02 February 2016, 21:21:09
Post by: tkpresent on Wed, 03 February 2016, 00:20:49
Post by: SaySo on Wed, 03 February 2016, 01:37:26
Post by: adamski07 on Wed, 03 February 2016, 02:10:56
Post by: mrboovn on Wed, 03 February 2016, 17:00:07
Now waiting :D
Post by: tom.smykowski on Wed, 03 February 2016, 17:20:45
Post by: E3E on Wed, 03 February 2016, 19:21:22
This will be one I don't know if I'll hang on to, but it's more so my just in case if certain things don't line up. If I end up letting go of it, I'll let you guys know.
Post by: romevi on Wed, 03 February 2016, 19:25:18
Paid!
This will be one I don't know if I'll hang on to, but it's more so my just in case if certain things don't line up. If I end up letting go of it FOR FREE!!! LOL, I'll let you guys know.
Wow, that's very generous of you! I'll take it! Thank you!
Post by: E3E on Wed, 03 February 2016, 19:27:03
Paid!
This will be one I don't know if I'll hang on to, but it's more so my just in case if certain things don't line up. If I end up letting go of it FOR FREE!!! LOL, I'll let you guys know.
Wow, that's very generous of you! I'll take it! Thank you!
Hahaha.
>:D
Post by: ika on Wed, 03 February 2016, 19:27:05
Paid!
This will be one I don't know if I'll hang on to, but it's more so my just in case if certain things don't line up. If I end up letting go of it, I'll let you guys know.
If you decide to go with the V2 over the V1 and let go of the original, I would love to be contacted first :^)
As for me, my funds are locked up for a few days - I'll be able to pay invoice by Friday though!
Post by: E3E on Wed, 03 February 2016, 19:27:53
Paid!
This will be one I don't know if I'll hang on to, but it's more so my just in case if certain things don't line up. If I end up letting go of it, I'll let you guys know.
If you decide to go with the V2 over the V1 and let go of the original, I would love to be contacted first :^)
Oh, this is sneaky! I like it. Haha. I'll let you know.
But, I do have a custom case that was built around the Octagon and its Lightpad bro, so I dunno... Might be hard to let that one go! :P
Post by: blighty on Wed, 03 February 2016, 21:18:09
(http://duck0113.tistory.com/128 (http://duck0113.tistory.com/128))
[attach=1]
Here's to hoping the first round ships in April! :thumb:
Post by: E3E on Wed, 03 February 2016, 21:51:45
ISO enter and 2.75u shift should make some people happy:
(http://duck0113.tistory.com/128 (http://duck0113.tistory.com/128))
(Attachment Link)
Here's to hoping the first round ships in April! :thumb:
If I keep this, I'm going to make it ISO, just because ISO needs some love.
Post by: joostflux on Wed, 03 February 2016, 23:53:51
Post by: darkclone24 on Thu, 04 February 2016, 02:45:31
Post by: lootbag on Thu, 04 February 2016, 03:58:45
SOOO close to 60, I hope (with good intentions) that some members will have to drop their orders.
Post by: 64rky on Thu, 04 February 2016, 05:33:49
ISO enter and 2.75u shift should make some people happy:
(http://duck0113.tistory.com/128 (http://duck0113.tistory.com/128))
(Attachment Link)
Here's to hoping the first round ships in April! :thumb:
What switches are those? Nice clear cases.
Post by: E3E on Thu, 04 February 2016, 08:22:59
ISO enter and 2.75u shift should make some people happy:
(http://duck0113.tistory.com/128 (http://duck0113.tistory.com/128))
(Attachment Link)
Here's to hoping the first round ships in April! :thumb:
What switches are those? Nice clear cases.
I'd say they are Gateron yellows with clear switch tops. I think the Gats put into a board from the factory came with black bottoms and clear switch tops, and that's what this looks like, despite being transplanted into an Octagon.
Post by: GL1TCH3D on Thu, 04 February 2016, 11:59:23
EDIT:
YEEESSSSSSS
First 30!
And paid
Post by: romevi on Thu, 04 February 2016, 13:34:46
30 plzzzzz =[
EDIT:
YEEESSSSSSS
First 30!
And paid
Nice! Congrats!
Post by: KetchyKech on Thu, 04 February 2016, 13:36:55
hopefully I can get in on that, would go nicely together :thumb:
Post by: romevi on Thu, 04 February 2016, 13:46:45
read in one of the other threads that a v2 of that butterfly keypad may be next..... ;D
hopefully I can get in on that, would go nicely together :thumb:
What was the price of the v1?
Post by: KetchyKech on Thu, 04 February 2016, 13:47:28
something steep, along the lines of 195$ i believe :eek:read in one of the other threads that a v2 of that butterfly keypad may be next..... ;D
hopefully I can get in on that, would go nicely together :thumb:
What was the price of the v1?
Post by: Weiss on Thu, 04 February 2016, 14:08:06
Post by: E3E on Thu, 04 February 2016, 14:38:25
read in one of the other threads that a v2 of that butterfly keypad may be next..... ;D
hopefully I can get in on that, would go nicely together :thumb:
What was the price of the v1?
It wasn't bad; it was around $125 before shipping. I paid $180 shipped for mine aftermarket.
****, if red is finally offered for a Lightpad, I might be too tempted. Silver would go well with the v2, but I love red and it'd go well with my Hammer and Octagon v1.
If it's just gonna be black and silver again, then silver is a no-brainer since I have a black v1.
Post by: romevi on Thu, 04 February 2016, 15:03:11
read in one of the other threads that a v2 of that butterfly keypad may be next..... ;D
hopefully I can get in on that, would go nicely together :thumb:
What was the price of the v1?
It wasn't bad; it was around $125 before shipping. I paid $180 shipped for mine aftermarket.
****, if red is finally offered for a Lightpad, I might be too tempted. Silver would go well with the v2, but I love red and it'd go well with my Hammer and Octagon v1.
If it's just gonna be black and silver again, then silver is a no-brainer since I have a black v1.
Hmm... This or the Jane pad?
Post by: E3E on Thu, 04 February 2016, 15:05:14
read in one of the other threads that a v2 of that butterfly keypad may be next..... ;D
hopefully I can get in on that, would go nicely together :thumb:
What was the price of the v1?
It wasn't bad; it was around $125 before shipping. I paid $180 shipped for mine aftermarket.
****, if red is finally offered for a Lightpad, I might be too tempted. Silver would go well with the v2, but I love red and it'd go well with my Hammer and Octagon v1.
If it's just gonna be black and silver again, then silver is a no-brainer since I have a black v1.
Hmm... This or the Jane pad?
Damn, thanks for reminding me. I have no idea what the Jane Pad is going to look like though, but that TGR is one sleek board.
I feel loyal to the Lightpad, but... Daaaammit!
Post by: 64rky on Thu, 04 February 2016, 15:06:58
read in one of the other threads that a v2 of that butterfly keypad may be next..... ;D
hopefully I can get in on that, would go nicely together :thumb:
What was the price of the v1?
It wasn't bad; it was around $125 before shipping. I paid $180 shipped for mine aftermarket.
****, if red is finally offered for a Lightpad, I might be too tempted. Silver would go well with the v2, but I love red and it'd go well with my Hammer and Octagon v1.
If it's just gonna be black and silver again, then silver is a no-brainer since I have a black v1.
Hmm... This or the Jane pad?
What is this pad you speak of?
Post by: romevi on Thu, 04 February 2016, 15:08:49
read in one of the other threads that a v2 of that butterfly keypad may be next..... ;D
hopefully I can get in on that, would go nicely together :thumb:
What was the price of the v1?
It wasn't bad; it was around $125 before shipping. I paid $180 shipped for mine aftermarket.
****, if red is finally offered for a Lightpad, I might be too tempted. Silver would go well with the v2, but I love red and it'd go well with my Hammer and Octagon v1.
If it's just gonna be black and silver again, then silver is a no-brainer since I have a black v1.
Hmm... This or the Jane pad?
What is this pad you speak of?
It's a secret for Jane r1 owners. ;D :-*
Post by: Steezus on Thu, 04 February 2016, 15:17:54
read in one of the other threads that a v2 of that butterfly keypad may be next..... ;D
hopefully I can get in on that, would go nicely together :thumb:
What was the price of the v1?
It wasn't bad; it was around $125 before shipping. I paid $180 shipped for mine aftermarket.
****, if red is finally offered for a Lightpad, I might be too tempted. Silver would go well with the v2, but I love red and it'd go well with my Hammer and Octagon v1.
If it's just gonna be black and silver again, then silver is a no-brainer since I have a black v1.
Hmm... This or the Jane pad?
What is this pad you speak of?
It's a secret for Jane r1 owners. ;D :-*
No, they're talking about the Duck Lightpad. The Lightpad v2 is suppose to come next after the Octagon v2 group buy, according to Sifo which was proven right after the last statement.
Post by: filphil on Thu, 04 February 2016, 15:20:29
read in one of the other threads that a v2 of that butterfly keypad may be next..... ;D
hopefully I can get in on that, would go nicely together :thumb:
What was the price of the v1?
It wasn't bad; it was around $125 before shipping. I paid $180 shipped for mine aftermarket.
****, if red is finally offered for a Lightpad, I might be too tempted. Silver would go well with the v2, but I love red and it'd go well with my Hammer and Octagon v1.
If it's just gonna be black and silver again, then silver is a no-brainer since I have a black v1.
Hmm... This or the Jane pad?
What is this pad you speak of?
It's a secret for Jane r1 owners. ;D :-*
No, they're talking about the Duck Lightpad. The Lightpad v2 is suppose to come next after the Octagon v2 group buy, according to Sifo which was proven right after the last statement.
Lightpad v2 sounds lovely except that bluegaloo didn't have the keys for it. And I've grown to really like bluegaloo. =(
Post by: romevi on Thu, 04 February 2016, 15:20:49
read in one of the other threads that a v2 of that butterfly keypad may be next..... ;D
hopefully I can get in on that, would go nicely together :thumb:
What was the price of the v1?
It wasn't bad; it was around $125 before shipping. I paid $180 shipped for mine aftermarket.
****, if red is finally offered for a Lightpad, I might be too tempted. Silver would go well with the v2, but I love red and it'd go well with my Hammer and Octagon v1.
If it's just gonna be black and silver again, then silver is a no-brainer since I have a black v1.
Hmm... This or the Jane pad?
What is this pad you speak of?
It's a secret for Jane r1 owners. ;D :-*
No, they're talking about the Duck Lightpad. The Lightpad v2 is suppose to come next after the Octagon v2 group buy, according to Sifo which was proven right after the last statement.
I assumed 64rky was asking me about the Jane pad.
Post by: Steezus on Thu, 04 February 2016, 15:43:47
read in one of the other threads that a v2 of that butterfly keypad may be next..... ;D
hopefully I can get in on that, would go nicely together :thumb:
What was the price of the v1?
It wasn't bad; it was around $125 before shipping. I paid $180 shipped for mine aftermarket.
****, if red is finally offered for a Lightpad, I might be too tempted. Silver would go well with the v2, but I love red and it'd go well with my Hammer and Octagon v1.
If it's just gonna be black and silver again, then silver is a no-brainer since I have a black v1.
Hmm... This or the Jane pad?
What is this pad you speak of?
It's a secret for Jane r1 owners. ;D :-*
No, they're talking about the Duck Lightpad. The Lightpad v2 is suppose to come next after the Octagon v2 group buy, according to Sifo which was proven right after the last statement.
I assumed 64rky was asking me about the Jane pad.
Oh ok, I just read the first few posts and saw that they were talking about the Lightpad.
All I have to say is,
(http://i.imgur.com/c7NJRa2.gif)
Post by: E3E on Thu, 04 February 2016, 15:58:49
Oh ok, I just read the first few posts and saw that they were talking about the Lightpad.
All I have to say is,Show Image(http://i.imgur.com/c7NJRa2.gif)
:thumb:
Post by: slowpokie on Thu, 04 February 2016, 17:39:43
Post by: bocahgundul on Thu, 04 February 2016, 17:44:52
Oh ok, I just read the first few posts and saw that they were talking about the Lightpad.Agreed :))
All I have to say is,Show Image(http://i.imgur.com/c7NJRa2.gif)
Post by: darkclone24 on Fri, 05 February 2016, 03:25:34
Post by: xondat on Fri, 05 February 2016, 06:10:25
Paid!
Oh we have a UK Octagon! :-*
If there ever is a meetup make sure to bring it
Post by: 64rky on Fri, 05 February 2016, 06:44:51
read in one of the other threads that a v2 of that butterfly keypad may be next..... ;D
hopefully I can get in on that, would go nicely together :thumb:
What was the price of the v1?
It wasn't bad; it was around $125 before shipping. I paid $180 shipped for mine aftermarket.
****, if red is finally offered for a Lightpad, I might be too tempted. Silver would go well with the v2, but I love red and it'd go well with my Hammer and Octagon v1.
If it's just gonna be black and silver again, then silver is a no-brainer since I have a black v1.
Hmm... This or the Jane pad?
What is this pad you speak of?
It's a secret for Jane r1 owners. ;D :-*
No, they're talking about the Duck Lightpad. The Lightpad v2 is suppose to come next after the Octagon v2 group buy, according to Sifo which was proven right after the last statement.
I assumed 64rky was asking me about the Jane pad.
Oh ok, I just read the first few posts and saw that they were talking about the Lightpad.
All I have to say is,Show Image(http://i.imgur.com/c7NJRa2.gif)
Links to either :)
Post by: aaron6301 on Fri, 05 February 2016, 11:27:33
Post by: roostrc0gburn on Fri, 05 February 2016, 13:32:59
Post by: HannahPeach on Sat, 06 February 2016, 04:36:50
Post by: duckness on Sat, 06 February 2016, 07:08:19
I have the number 55 next to my "PAID". I really really hope that this is not how it's decided whether or not you're in the first round or the second since I am spot 20 actually.
I believe it's just the order in which you were invoiced. You probably took over someone's spot 20?
Post by: HannahPeach on Sat, 06 February 2016, 07:33:22
I have the number 55 next to my "PAID". I really really hope that this is not how it's decided whether or not you're in the first round or the second since I am spot 20 actually.
I believe it's just the order in which you were invoiced. You probably took over someone's spot 20?
No I did not, I was invoiced before and there was a little bit of a confusion so that I had to be invoiced a second time.
But you don't think that I'd be in the second run now?
Post by: xondat on Sat, 06 February 2016, 09:36:02
I have the number 55 next to my "PAID". I really really hope that this is not how it's decided whether or not you're in the first round or the second since I am spot 20 actually.
I believe it's just the order in which you were invoiced. You probably took over someone's spot 20?
No I did not, I was invoiced before and there was a little bit of a confusion so that I had to be invoiced a second time.
But you don't think that I'd be in the second run now?
I doubt that'd happen, seeming you are in the first run. Invoicing order is a stupid way to figure out what run you're in.
Post by: HannahPeach on Sat, 06 February 2016, 14:37:56
I have the number 55 next to my "PAID". I really really hope that this is not how it's decided whether or not you're in the first round or the second since I am spot 20 actually.
I believe it's just the order in which you were invoiced. You probably took over someone's spot 20?
No I did not, I was invoiced before and there was a little bit of a confusion so that I had to be invoiced a second time.
But you don't think that I'd be in the second run now?
I doubt that'd happen, seeming you are in the first run. Invoicing order is a stupid way to figure out what run you're in.
Elton just got back to me and cleared up that he does not use invoice numbers to sort who's in which round.
Post by: Pieminister on Mon, 08 February 2016, 07:52:54
Post by: omgar on Mon, 08 February 2016, 08:00:50
Sorry, this has probably been asked, but estimated shopping time is a few months, isnt it? I am mainly excited because once these puppies are out i think its time for.... LightSaver 3.0!!!!!
In the Duck Eagle/Viper GB thread Elton said he "heard viper and eagle might show up again after Octagon V2" (https://geekhack.org/index.php?topic=61227.msg2045207#msg2045207).
Post by: KetchyKech on Mon, 08 February 2016, 10:46:22
what are everyone's respective plans for their Octagonv2s? Do you have a keyset in mind to go with your case color combo? Which switches does everyone have on deck for the build? ~ What bottom row are people leaning towards?
I have a steel plate w/ mine so I def want to go linear switches, maybe linear zealios (which never seems to get love, but in general ppl around here despise linear) or some vintage blacks, but good ones seem hard to come by. I'm in to RGB lighting on the keycaps but i already went acrylic angled bottom, so not sure how much of a light show I'd want
As for sets I'm not too sure, I went with blue grey top/angled acrylic bottom, so I'm thinking GMK Cyan (if i can stalk mechmarket for a set if im lucky) or perhaps waiting on nubb's GMK Skeletor, which looks amaze (and im not even a huge fan of purple and I like it)
And my bottom row will either surely be the winkeyless (them mods just look so good in winkeyless) or the winkey/winkyless mix, which i've rarely seen before :thumb:
edit: lets not forget Nanucket Selectric in all its glory :-*
Post by: slowpokie on Mon, 08 February 2016, 10:48:05
Sorry, this has probably been asked, but estimated shopping time is a few months, isnt it? I am mainly excited because once these puppies are out i think its time for.... LightSaver 3.0!!!!!
In the Duck Eagle/Viper GB thread Elton said he "heard viper and eagle might show up again after Octagon V2" (https://geekhack.org/index.php?topic=61227.msg2045207#msg2045207).
Kreygasm
I need to make sure I'm on that Eagle/Viper GB to make up for missing the Octagon.
Post by: darkclone24 on Mon, 08 February 2016, 10:52:49
the hype is real--
what are everyone's respective plans for their Octagonv2s? Do you have a keyset in mind to go with your case color combo? Which switches does everyone have on deck for the build? ~ What bottom row are people leaning towards?
I have a steel plate w/ mine so I def want to go linear switches, maybe linear zealios (which never seems to get love, but in general ppl around here despise linear) or some vintage blacks, but good ones seem hard to come by. I'm in to RGB lighting on the keycaps but i already went acrylic angled bottom, so not sure how much of a light show I'd want
As for sets I'm not too sure, I went with blue grey top/angled acrylic bottom, so I'm thinking GMK Cyan (if i can stalk mechmarket for a set if im lucky) or perhaps waiting on nubb's GMK Skeletor, which looks amaze (and im not even a huge fan of purple and I like it)
And my bottom row will either surely be the winkeyless (them mods just look so good in winkeyless) or the winkey/winkyless mix, which i've rarely seen before :thumb:
edit: lets not forget Nanucket Selectric in all its glory :-*
I've got the black top case with acrylic angled bottom - definitely going to be some darker coloured caps on there. GMK SkiData+ is definitely the first thing going on there.
Switch-wise I'm going for 78g Zealios. I like the 67g Zealios I have on my RS84, but I definitely want to try out the new, heavier switch.
As for bottom row, I'm going for full winkeyless - I have the winkey/winkeyless mix on my RS84 and I want to try something with more symmetry.
Post by: duckness on Mon, 08 February 2016, 11:51:48
the hype is real--Already have some 67g Zealios and a USB cable. Just waiting for Penumbra R2. Will probably do a 1.25+1.25+1.25+6.25+1.5+1.5 for the bottom row.
what are everyone's respective plans for their Octagonv2s? Do you have a keyset in mind to go with your case color combo? Which switches does everyone have on deck for the build? ~ What bottom row are people leaning towards?
I have a steel plate w/ mine so I def want to go linear switches, maybe linear zealios (which never seems to get love, but in general ppl around here despise linear) or some vintage blacks, but good ones seem hard to come by. I'm in to RGB lighting on the keycaps but i already went acrylic angled bottom, so not sure how much of a light show I'd want
As for sets I'm not too sure, I went with blue grey top/angled acrylic bottom, so I'm thinking GMK Cyan (if i can stalk mechmarket for a set if im lucky) or perhaps waiting on nubb's GMK Skeletor, which looks amaze (and im not even a huge fan of purple and I like it)
And my bottom row will either surely be the winkeyless (them mods just look so good in winkeyless) or the winkey/winkyless mix, which i've rarely seen before :thumb:
edit: lets not forget Nanucket Selectric in all its glory :-*
Post by: E3E on Tue, 09 February 2016, 00:15:04
the hype is real--
what are everyone's respective plans for their Octagonv2s? Do you have a keyset in mind to go with your case color combo? Which switches does everyone have on deck for the build? ~ What bottom row are people leaning towards?
I have a steel plate w/ mine so I def want to go linear switches, maybe linear zealios (which never seems to get love, but in general ppl around here despise linear) or some vintage blacks, but good ones seem hard to come by. I'm in to RGB lighting on the keycaps but i already went acrylic angled bottom, so not sure how much of a light show I'd want
As for sets I'm not too sure, I went with blue grey top/angled acrylic bottom, so I'm thinking GMK Cyan (if i can stalk mechmarket for a set if im lucky) or perhaps waiting on nubb's GMK Skeletor, which looks amaze (and im not even a huge fan of purple and I like it)
And my bottom row will either surely be the winkeyless (them mods just look so good in winkeyless) or the winkey/winkyless mix, which i've rarely seen before :thumb:
edit: lets not forget Nanucket Selectric in all its glory :-*
Since my Octagon v1 had linear switches in it, I decided to go for clicky switches this time with an aluminum plate (first time ever using an aluminum plate, so I'm excited for that).
I wanted something a little different so I went for vintage MX whites (which have translucent stems and no nub to identify it as clicky) with the intent to do the unorthodox, swap them in Zealio housings so they give of the misleading appearance of either linear Zealios or MX clears stems swapped into Zealios. I found a nice amount of them! I also wanted this for the sake of seeing the RGB glow up from under them; the idea of a totally translucent clicky switch just really got me hooked on the idea, even though I typically hate MX clicky (and love Alps clicky).
Here's a typing test (https://drive.google.com/file/d/0Bz7wy2NQWCerZ1M0RHgzWGRiSkk/view?usp=sharing) going from Blue Alps > Vintage Whites in Zealio housings > Stock Vintage Whites > Modern MX Green
I personally think that the vintage whites in Zealios sound very similar to blue Alps for what it's worth, at least as close as you can get with MX switches, except for maybe that strange pro world clone switch that had an MX stem and reminiscent housing but also had an alps-like click leaf wedged in there, haha. MX Greens are ew. Vintage whites in stock housings are a little underwhelming. What do you think?
This idea was one of the strongest motivators for me in buying an Octagon v2, since I'm kind of removed from Cherry MX these days.
-
Another big one was GMK SNES, which I think will look sick with my silver and blue grey dual tone scheme, like the light and dark grey plastic of an SNES. I really hope that set meets MQO next time it is run.
If not, then I'll either get EnjoyPBT, some black cherry POM blanks, or just sell the damn thing and the vintage whites haha. :P If GMK SNES does hit MQO, I can see myself hunting for certain GMK mods till the end of time.
I also plan on hotswap modding it, which is much easier than the craziness I had to do to create a hotswappable Alps Eagle, lol. Cherry is no where near as complicated to modify for holtite sockets (this is going to prompt many questions, I can just see it).
I also went with the flat acrylic bottom at the recommendation of, I think it was Steezus? Yeah, just to really soak up that rainbow glory, even though I think I'll prefer a full aluminum board.
Got some ducky duck feet that I might use for the flat bottom or put on the case I get for my second Alps Eagle, which is planned to be a carbon fiber case which might be rather flat in profile, so the feet would work well there and have more DUCK rep for the build. :P
/ramble
Post by: lootbag on Tue, 09 February 2016, 02:42:41
the hype is real--
what are everyone's respective plans for their Octagonv2s? Do you have a keyset in mind to go with your case color combo? Which switches does everyone have on deck for the build? ~ What bottom row are people leaning towards?
I have a steel plate w/ mine so I def want to go linear switches, maybe linear zealios (which never seems to get love, but in general ppl around here despise linear) or some vintage blacks, but good ones seem hard to come by. I'm in to RGB lighting on the keycaps but i already went acrylic angled bottom, so not sure how much of a light show I'd want
As for sets I'm not too sure, I went with blue grey top/angled acrylic bottom, so I'm thinking GMK Cyan (if i can stalk mechmarket for a set if im lucky) or perhaps waiting on nubb's GMK Skeletor, which looks amaze (and im not even a huge fan of purple and I like it)
And my bottom row will either surely be the winkeyless (them mods just look so good in winkeyless) or the winkey/winkyless mix, which i've rarely seen before :thumb:
edit: lets not forget Nanucket Selectric in all its glory :-*
I am not too clear on my plan for the Octagon V2 either but definitely winkeyless bottom row.
Went with the acrylic angled to cut some costs and besides already have a full metal case with the Duck Viper.
I have full access to a laser cutting machine and 3D printers (but an old CNC machine that I would not trust with a chunk of acrylic/polycarbonate/delrin), so I figured I could also make a flat acrylic bottom (and feet) myself at a later date.'
I have GMK TA on the Viper and an incomplete white on black SA set sitting around, but I am thinking of trying a set of Enjoypbt (cyrillic orange and black or... cyan/pink hangul).
But just like E3E, GMK SNES would be my #1 choice if it meets MOQ next time around.
My Duck Viper has the steel plate and vintage MX blacks which is very enjoyable but will probably go tactile for the Octagon(or maybe just default to linear again) but I ordered an aluminum plate.
Trying to make up my mind on 67g or 78g Zealios... or maybe just join the Gateron Massdrop going on right now to save some money.
Post by: havenlau on Tue, 09 February 2016, 08:51:37
Post by: aaron6301 on Tue, 09 February 2016, 14:49:30
the hype is real--
what are everyone's respective plans for their Octagonv2s? Do you have a keyset in mind to go with your case color combo? Which switches does everyone have on deck for the build? ~ What bottom row are people leaning towards?
I have a steel plate w/ mine so I def want to go linear switches, maybe linear zealios (which never seems to get love, but in general ppl around here despise linear) or some vintage blacks, but good ones seem hard to come by. I'm in to RGB lighting on the keycaps but i already went acrylic angled bottom, so not sure how much of a light show I'd want
As for sets I'm not too sure, I went with blue grey top/angled acrylic bottom, so I'm thinking GMK Cyan (if i can stalk mechmarket for a set if im lucky) or perhaps waiting on nubb's GMK Skeletor, which looks amaze (and im not even a huge fan of purple and I like it)
And my bottom row will either surely be the winkeyless (them mods just look so good in winkeyless) or the winkey/winkyless mix, which i've rarely seen before :thumb:
edit: lets not forget Nanucket Selectric in all its glory :-*
Since I opted for the Blue/Grey case I think I might be going with GMK Olivetti and some 65g or 67g Zealios. Seeing as I intend to put some 65g tactiles in my White Fox, I'm likely leaning towards 67g switches to change it up.
Post by: ctrlX on Wed, 10 February 2016, 00:49:34
Tell us more about your hot-swap mod. Very curious.the hype is real--
what are everyone's respective plans for their Octagonv2s? Do you have a keyset in mind to go with your case color combo? Which switches does everyone have on deck for the build? ~ What bottom row are people leaning towards?
I have a steel plate w/ mine so I def want to go linear switches, maybe linear zealios (which never seems to get love, but in general ppl around here despise linear) or some vintage blacks, but good ones seem hard to come by. I'm in to RGB lighting on the keycaps but i already went acrylic angled bottom, so not sure how much of a light show I'd want
As for sets I'm not too sure, I went with blue grey top/angled acrylic bottom, so I'm thinking GMK Cyan (if i can stalk mechmarket for a set if im lucky) or perhaps waiting on nubb's GMK Skeletor, which looks amaze (and im not even a huge fan of purple and I like it)
And my bottom row will either surely be the winkeyless (them mods just look so good in winkeyless) or the winkey/winkyless mix, which i've rarely seen before :thumb:
edit: lets not forget Nanucket Selectric in all its glory :-*
Since my Octagon v1 had linear switches in it, I decided to go for clicky switches this time with an aluminum plate (first time ever using an aluminum plate, so I'm excited for that).
I wanted something a little different so I went for vintage MX whites (which have translucent stems and no nub to identify it as clicky) with the intent to do the unorthodox, swap them in Zealio housings so they give of the misleading appearance of either linear Zealios or MX clears stems swapped into Zealios. I found a nice amount of them! I also wanted this for the sake of seeing the RGB glow up from under them; the idea of a totally translucent clicky switch just really got me hooked on the idea, even though I typically hate MX clicky (and love Alps clicky).
Here's a typing test (https://drive.google.com/file/d/0Bz7wy2NQWCerZ1M0RHgzWGRiSkk/view?usp=sharing) going from Blue Alps > Vintage Whites in Zealio housings > Stock Vintage Whites > Modern MX Green
I personally think that the vintage whites in Zealios sound very similar to blue Alps for what it's worth, at least as close as you can get with MX switches, except for maybe that strange pro world clone switch that had an MX stem and reminiscent housing but also had an alps-like click leaf wedged in there, haha. MX Greens are ew. Vintage whites in stock housings are a little underwhelming. What do you think?
This idea was one of the strongest motivators for me in buying an Octagon v2, since I'm kind of removed from Cherry MX these days.
-
Another big one was GMK SNES, which I think will look sick with my silver and blue grey dual tone scheme, like the light and dark grey plastic of an SNES. I really hope that set meets MQO next time it is run.
If not, then I'll either get EnjoyPBT, some black cherry POM blanks, or just sell the damn thing and the vintage whites haha.If GMK SNES does hit MQO, I can see myself hunting for certain GMK mods till the end of time.
I also plan on hotswap modding it, which is much easier than the craziness I had to do to create a hotswappable Alps Eagle, lol. Cherry is no where near as complicated to modify for holtite sockets (this is going to prompt many questions, I can just see it).
I also went with the flat acrylic bottom at the recommendation of, I think it was Steezus? Yeah, just to really soak up that rainbow glory, even though I think I'll prefer a full aluminum board.
Got some ducky duck feet that I might use for the flat bottom or put on the case I get for my second Alps Eagle, which is planned to be a carbon fiber case which might be rather flat in profile, so the feet would work well there and have more DUCK rep for the build.
/ramble
Post by: Zapheo on Wed, 10 February 2016, 00:56:02
Post by: elton5354 on Wed, 10 February 2016, 19:37:31
Post by: Steezus on Wed, 10 February 2016, 19:45:38
Actually, they are willing to do another batch after the 2nd batch. It will take another month or so after the 2nd batch though.
Well I'm sure that will make a lot of peoples' day. Great info elton! :thumb:
Post by: Sifo on Wed, 10 February 2016, 19:46:33
Actually, they are willing to do another batch after the 2nd batch. It will take another month or so after the 2nd batch though.
ayyyy duck
Post by: tuco on Wed, 10 February 2016, 19:53:54
Post by: o3okevin on Wed, 10 February 2016, 19:54:14
Actually, they are willing to do another batch after the 2nd batch. It will take another month or so after the 2nd batch though.Elton the superhero
Post by: Zapheo on Wed, 10 February 2016, 19:57:49
Actually, they are willing to do another batch after the 2nd batch. It will take another month or so after the 2nd batch though.
Well that just made my night. ;D
Post by: alienman82 on Wed, 10 February 2016, 20:03:49
Post by: jshane on Wed, 10 February 2016, 20:36:58
Even money takes it.
Post by: romevi on Wed, 10 February 2016, 21:30:20
Post by: slowpokie on Wed, 10 February 2016, 21:53:39
Actually, they are willing to do another batch after the 2nd batch. It will take another month or so after the 2nd batch though.
Oh sweet glazed honey BBQ jesus. Best news I've heard all month. So happy!
Post by: havenlau on Thu, 11 February 2016, 08:52:01
Actually, they are willing to do another batch after the 2nd batch. It will take another month or so after the 2nd batch though.
oh yussssssssssss
Selling my order in the first round.so many options :-X
Even money takes it.
Post by: Chewypost on Sat, 13 February 2016, 12:45:29
Actually, they are willing to do another batch after the 2nd batch. It will take another month or so after the 2nd batch though.
I guess I'll be browsing every hour for the next couple months :p
Post by: GL1TCH3D on Sat, 13 February 2016, 12:47:44
Post by: HannahPeach on Sat, 13 February 2016, 12:59:04
I might have to raise funds (some additional fees came up for the golbat that weren't known before...) so I might sell my order...
RIP inbox :(
Post by: elton5354 on Tue, 16 February 2016, 17:58:25
Post by: alienman82 on Tue, 16 February 2016, 19:50:01
Post by: GL1TCH3D on Wed, 17 February 2016, 07:03:20
Oh well, guess I'll tough it out!
Post by: havenlau on Wed, 17 February 2016, 16:59:31
So I think I gave the unpaid orders enough time to pay..I'm going to cancel their orders and let the 3 next in line if they are still interested..that means i'm actually the 60th omg yusssss
send me the n000ds
i mean invoice
Post by: mrboovn on Wed, 17 February 2016, 17:52:32
Congrat to join octagon team :thumb:So I think I gave the unpaid orders enough time to pay..I'm going to cancel their orders and let the 3 next in line if they are still interested..that means i'm actually the 60th omg yusssss
send me the n000ds
i mean invoice
Post by: aaron6301 on Wed, 17 February 2016, 18:16:07
So I think I gave the unpaid orders enough time to pay..I'm going to cancel their orders and let the 3 next in line if they are still interested..that means i'm actually the 60th omg yusssss
send me the n000ds
i mean invoice
Aw yeah, congrats! :thumb:
Post by: E3E on Wed, 17 February 2016, 18:42:11
Post by: lootbag on Thu, 18 February 2016, 00:41:21
So I think I gave the unpaid orders enough time to pay..I'm going to cancel their orders and let the 3 next in line if they are still interested..
Good to hear about not giving the stragglers anymore time to dawdle on payments.
Let's get the ball rolling on this GB!
The sooner I receive my Octagon, the better.
that means i'm actually the 60th omg yusssss
I know that feeling haha.
Post by: naasfu on Thu, 18 February 2016, 03:59:16
Post by: havenlau on Thu, 18 February 2016, 08:30:01
Haha I saw you went from 70 to 60, the feeling of barely sneaking in :-\So I think I gave the unpaid orders enough time to pay..I'm going to cancel their orders and let the 3 next in line if they are still interested..
Good to hear about not giving the stragglers anymore time to dawdle on payments.
Let's get the ball rolling on this GB!
The sooner I receive my Octagon, the better.that means i'm actually the 60th omg yusssss
I know that feeling haha.
Seems like we have the identical setup though :p
Blue grey + acrylic bottom + aluminum plate :thumb:
Can't wait
Post by: alienman82 on Thu, 18 February 2016, 09:27:57
Post by: Phenix on Thu, 18 February 2016, 09:40:26
Post by: FLFisherman on Thu, 18 February 2016, 09:41:36
Would like to join. Is it possible? Can I get an Iso layout?
We are well past the deadline, so most likely not. There's also a waitlist.
Post by: Phenix on Thu, 18 February 2016, 10:32:59
Post by: FLFisherman on Thu, 18 February 2016, 10:36:18
how long is the waitlist?
This long (https://docs.google.com/spreadsheets/d/19enJgC0uMUPcQd_qNDn1UH7A2x2IJJie3UGb4l3U7MU/pubhtml?gid=1358261006&single=true), as of January 12th.
Post by: romevi on Thu, 18 February 2016, 10:38:26
how long is the waitlist?
This long (https://docs.google.com/spreadsheets/d/19enJgC0uMUPcQd_qNDn1UH7A2x2IJJie3UGb4l3U7MU/pubhtml?gid=1358261006&single=true), as of January 12th.
And only the first 60 will get in for now.
Post by: 64rky on Thu, 18 February 2016, 11:33:22
Nobody wanted the order
Oh well, guess I'll tough it out!
This user was selling their place, not sure if so anymore.
Post by: E3E on Thu, 18 February 2016, 15:00:31
how long is the waitlist?
It got up to 90+ before it was hacked down to 77.
I wouldn't hold my breath on the possibility of Duck handling more orders after he's done the first 60, but hopefully so for all those that are missing out here.
Post by: naasfu on Fri, 19 February 2016, 02:15:49
elton, can i get in for the wait list, please?
You can have my spot. It's above 60 though so it may take a while
smoochies! :-*
I wouldn't hold my breath on the possibility of Duck handling more orders after he's done the first 60, but hopefully so for all those that are missing out here.
holding my breath now...
Post by: gadzkun on Fri, 19 February 2016, 02:58:00
The most powerful custom keyboard.
code name : Trinity
(http://cfile24.uf.tistory.com/image/2301E04456C6846E1A951C)
:eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek:
any news about this new duck project?
Post by: naasfu on Fri, 19 February 2016, 03:01:00
comming soon.
The most powerful custom keyboard.
code name : TrinityShow Image(http://cfile24.uf.tistory.com/image/2301E04456C6846E1A951C)
:eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek:
any news about this new duck project?
looks like a zealio to me. :))
or maybe a full-sized board? or two-person viper!
edit: another guess: if it's called trinity, then maybe some kind of three piece board combo? like 60%, num pad, and F row cluster?
Post by: duckness on Fri, 19 February 2016, 06:00:22
comming soon.
The most powerful custom keyboard.
code name : TrinityShow Image(http://cfile24.uf.tistory.com/image/2301E04456C6846E1A951C)
:eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek:
any news about this new duck project?
If you shrink it then upscale with a blur, you can kind of make out a few features
(http://i.imgur.com/u7CueFq.png)
Post by: E3E on Fri, 19 February 2016, 06:57:18
comming soon.
The most powerful custom keyboard.
code name : TrinityShow Image(http://cfile24.uf.tistory.com/image/2301E04456C6846E1A951C)
:eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek:
any news about this new duck project?
looks like a zealio to me. :))
or maybe a full-sized board? or two-person viper!
edit: another guess: if it's called trinity, then maybe some kind of three piece board combo? like 60%, num pad, and F row cluster?
Holy ****, Naas, I think you've pretty much nailed it. Considering the fact Elton said the next Lightpad was going to be very modular and customizable, to the fact he said the Eagle/Viper v2 might be coming up soon.
These all seem like pieces to the Trinity puzzle.
And god damn will they be expensive, I bet. If it allows Alps then I'm done.
Post by: gadzkun on Fri, 19 February 2016, 07:24:01
comming soon.
The most powerful custom keyboard.
code name : TrinityShow Image(http://cfile24.uf.tistory.com/image/2301E04456C6846E1A951C)
:eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek:
any news about this new duck project?
looks like a zealio to me. :))
or maybe a full-sized board? or two-person viper!
edit: another guess: if it's called trinity, then maybe some kind of three piece board combo? like 60%, num pad, and F row cluster?
Holy ****, Naas, I think you've pretty much nailed it. Considering the fact Elton said the next Lightpad was going to be very modular and customizable, to the fact he said the Eagle/Viper v2 might be coming up soon.
These all seem like pieces to the Trinity puzzle.
And god damn will they be expensive, I bet. If it allows Alps then I'm done.
hope it will resemble lightsaver a bit i need lightsaver in my laifu :'(
Post by: ika on Fri, 19 February 2016, 07:48:28
Post by: GL1TCH3D on Sat, 20 February 2016, 08:45:26
Half life 3 confirmed?
Post by: romevi on Sat, 20 February 2016, 10:23:19
Code name trinityIt was worth the weight.
Half life 3 confirmed?
Post by: aaron6301 on Sat, 20 February 2016, 16:02:59
https://www.originativeco.com/products/cherry-pcb-mounted-stabilizer?variant=10172620357
Post by: roostrc0gburn on Sat, 20 February 2016, 17:30:22
Originative just stocked some PCB mounted stabs if people are still in need.
https://www.originativeco.com/products/cherry-pcb-mounted-stabilizer?variant=10172620357
****. did not even see that. just ordered sky dolch. think they can just add this to my order?
Post by: aaron6301 on Sat, 20 February 2016, 17:32:42
Originative just stocked some PCB mounted stabs if people are still in need.
https://www.originativeco.com/products/cherry-pcb-mounted-stabilizer?variant=10172620357
****. did not even see that. just ordered sky dolch. think they can just add this to my order?
I'm sure they can. I placed an order for Sky as well and they didn't provide free shipping even though it was $100+. I emailed them through the website and they issued the refund for shipping immediately. :thumb:
Post by: roostrc0gburn on Sat, 20 February 2016, 20:56:03
Originative just stocked some PCB mounted stabs if people are still in need.
https://www.originativeco.com/products/cherry-pcb-mounted-stabilizer?variant=10172620357
****. did not even see that. just ordered sky dolch. think they can just add this to my order?
I'm sure they can. I placed an order for Sky as well and they didn't provide free shipping even though it was $100+. I emailed them through the website and they issued the refund for shipping immediately. :thumb:
that's weird. i paid for shipping too, but i was surprised when they sent a refund for it
Post by: beltet on Sun, 21 February 2016, 03:03:54
Post by: Chewypost on Sun, 21 February 2016, 13:31:55
Any news on the third possible batch?....
There won't be any word until the first and second batch finishes. Shame, but there's a glimmer of hope for the third batch :)
Post by: E3E on Mon, 29 February 2016, 18:07:49
At the risk of sounding fickle, I have to say that I might need a little more time to consider this.
Post by: Steezus on Mon, 29 February 2016, 18:13:10
Welp, I've decided to sell off my order. If anyone wants Order #12 on the order form (https://docs.google.com/spreadsheets/d/19enJgC0uMUPcQd_qNDn1UH7A2x2IJJie3UGb4l3U7MU/pubhtml?gid=1358261006&single=true), please let me know.
That's a shocker, why the change of mind? :(
Post by: E3E on Mon, 29 February 2016, 18:21:48
Welp, I've decided to sell off my order. If anyone wants Order #12 on the order form (https://docs.google.com/spreadsheets/d/19enJgC0uMUPcQd_qNDn1UH7A2x2IJJie3UGb4l3U7MU/pubhtml?gid=1358261006&single=true), please let me know.
That's a shocker, why the change of mind? :(
Haha, well. The Orion v2 purchase and $400+ on top of that for supplies for the Alps build (gold plated holtites for you know what again, + a mint AT101 + stuff for dyeing key caps and then some), a flat acrylic bottom, etc really put a dent in my funds.
When I saw Yutksi's LZ-FE, I was thinking if I had made a mistake with my Orion v2 purchase, since I've paid that much and more already, haha. The FE can take an Alps plate too, so I was rather downtrodden over that.
I guess I'm not 100% sure yet, to be honest. I feel like I don't really need more MX boards as it is.
Post by: Steezus on Mon, 29 February 2016, 18:24:29
Welp, I've decided to sell off my order. If anyone wants Order #12 on the order form (https://docs.google.com/spreadsheets/d/19enJgC0uMUPcQd_qNDn1UH7A2x2IJJie3UGb4l3U7MU/pubhtml?gid=1358261006&single=true), please let me know.
That's a shocker, why the change of mind? :(
Haha, well. The Orion v2 purchase and $400+ on top of that for supplies for the Alps build (gold plated holtites for you know what again, + a mint AT101 + stuff for dyeing key caps and then some), a flat acrylic bottom, etc really put a dent in my funds.
When I saw Yutksi's LZ-FE, I was thinking if I had made a mistake with my Orion v2 purchase, since I've paid that much and more already, haha. The FE can take an Alps plate too, so I was rather downtrodden over that.
I guess I'm not 100% sure yet, to be honest. I feel like I don't really need more MX boards as it is.
Ah ok, I think an Alps Orion v2 will be more than perfect. Don't regret your decision, make the best of it. :thumb:
Post by: E3E on Mon, 29 February 2016, 18:26:20
Welp, I've decided to sell off my order. If anyone wants Order #12 on the order form (https://docs.google.com/spreadsheets/d/19enJgC0uMUPcQd_qNDn1UH7A2x2IJJie3UGb4l3U7MU/pubhtml?gid=1358261006&single=true), please let me know.
That's a shocker, why the change of mind? :(
Haha, well. The Orion v2 purchase and $400+ on top of that for supplies for the Alps build (gold plated holtites for you know what again, + a mint AT101 + stuff for dyeing key caps and then some), a flat acrylic bottom, etc really put a dent in my funds.
When I saw Yutksi's LZ-FE, I was thinking if I had made a mistake with my Orion v2 purchase, since I've paid that much and more already, haha. The FE can take an Alps plate too, so I was rather downtrodden over that.
I guess I'm not 100% sure yet, to be honest. I feel like I don't really need more MX boards as it is.
Ah ok, I think an Alps Orion v2 will be more than perfect. Don't regret your decision, make the best of it. :thumb:
Thanks man!
Yeah, it's what I had always hoped for to be honest. I've always seen it as a spiritual successor to the Kingsaver so I'm very happy to have found one! I appreciate the pep up. :)
Post by: Steezus on Mon, 29 February 2016, 18:29:45
Welp, I've decided to sell off my order. If anyone wants Order #12 on the order form (https://docs.google.com/spreadsheets/d/19enJgC0uMUPcQd_qNDn1UH7A2x2IJJie3UGb4l3U7MU/pubhtml?gid=1358261006&single=true), please let me know.
That's a shocker, why the change of mind? :(
Haha, well. The Orion v2 purchase and $400+ on top of that for supplies for the Alps build (gold plated holtites for you know what again, + a mint AT101 + stuff for dyeing key caps and then some), a flat acrylic bottom, etc really put a dent in my funds.
When I saw Yutksi's LZ-FE, I was thinking if I had made a mistake with my Orion v2 purchase, since I've paid that much and more already, haha. The FE can take an Alps plate too, so I was rather downtrodden over that.
I guess I'm not 100% sure yet, to be honest. I feel like I don't really need more MX boards as it is.
Ah ok, I think an Alps Orion v2 will be more than perfect. Don't regret your decision, make the best of it. :thumb:
Thanks man!
Yeah, it's what I had always hoped for to be honest. I've always seen it as a spiritual successor to the Kingsaver so I'm very happy to have found one! I appreciate the pep up. :)
TBH I kind of regret selling my Orion v2. I don't know if it's because I sold a fully functioning board for a kit that still hasn't been built yet or what. Not a single one of my parts for my 360c has arrived yet, kind of already over the board. :))
Post by: Chewypost on Mon, 29 February 2016, 22:54:09
Welp, I've decided to sell off my order. If anyone wants Order #12 on the order form (https://docs.google.com/spreadsheets/d/19enJgC0uMUPcQd_qNDn1UH7A2x2IJJie3UGb4l3U7MU/pubhtml?gid=1358261006&single=true), please let me know.
That's a shocker, why the change of mind? :(
Haha, well. The Orion v2 purchase and $400+ on top of that for supplies for the Alps build (gold plated holtites for you know what again, + a mint AT101 + stuff for dyeing key caps and then some), a flat acrylic bottom, etc really put a dent in my funds.
When I saw Yutksi's LZ-FE, I was thinking if I had made a mistake with my Orion v2 purchase, since I've paid that much and more already, haha. The FE can take an Alps plate too, so I was rather downtrodden over that.
I guess I'm not 100% sure yet, to be honest. I feel like I don't really need more MX boards as it is.
Ah ok, I think an Alps Orion v2 will be more than perfect. Don't regret your decision, make the best of it. :thumb:
Thanks man!
Yeah, it's what I had always hoped for to be honest. I've always seen it as a spiritual successor to the Kingsaver so I'm very happy to have found one! I appreciate the pep up. :)
Hey man I can understand, it does eat a lot at your funds and it makes you get buyers remorse. But the Orion is something that you should look forward to. Pace yourself with the parts of it really is taking a toll on your wallet :P
Post by: E3E on Mon, 29 February 2016, 23:30:33
TBH I kind of regret selling my Orion v2. I don't know if it's because I sold a fully functioning board for a kit that still hasn't been built yet or what. Not a single one of my parts for my 360c has arrived yet, kind of already over the board. :))
I understand that, man. OTD has a lot of pull behind it, and they are really nicely styled, especially the Corsa. Yeah, but they are older boards and to be honest, with how they need to be flashed, they seem like they are far less flexible. Still, I understand the hype.
At first I wasn't sure about the Orion v2 as I've always felt like TKL would not be a layout I cared for. I made an exception though since it's one of the few Alps customs out there and even then... The odds of landing on of the 7 that were sold outside of Korea... I couldn't pass that up.
So I'm really excited about it, and it'd would most likely be far more satisfying than simply throwing a huge wad down for a rare LZ--this one has more creativity behind it (I mean this in the sense of the ideas I have in mind for the build). The LZ would've just been > receive board > wait for Leeku PCB+Plate Alps GB for the LZ-FE > assemble and throw on a simple, nice set of caps.
The Orion v2 project is going to be much more involved. Doiku Saver v2 is going to be what I'm going to call it. :P
I'm rambling. :) I'm sure you will totally enjoy your OTD when all is said and done. I understand how it can be waiting so long that the original hype just falls by the wayside, but I think you'll feel it again when everything arrives.
Hey man I can understand, it does eat a lot at your funds and it makes you get buyers remorse. But the Orion is something that you should look forward to. Pace yourself with the parts of it really is taking a toll on your wallet :P
Right? Most of my money spent in this hobby has been toward projects and vintage Alps boards over just Korean customs. If I had just allocated all my extra cash to custom boards, I'd probably have a decently sized fleet. But hey, it's the passion that matters most, I think. Just trying not to break the bank with it either, haha.
The last component I need for this Orion v2 is a brass plate. HNNG. I want one so bad, haha.
Post by: Mrs. Butter on Tue, 15 March 2016, 16:37:48
This is going to be one beautiful board. Hnnnnngggg.
Post by: HannahPeach on Tue, 15 March 2016, 18:20:18
Post by: naasfu on Tue, 15 March 2016, 18:34:22
edit: grey top works too.
Post by: GL1TCH3D on Wed, 16 March 2016, 08:21:52
Letting go of my order (order 20), shoot me a message for any details.
nooooo hannah whyyyyy
Also any news on this shipping?
Post by: WNovizar on Wed, 16 March 2016, 08:39:50
Letting go of my order (order 20), shoot me a message for any details.
YGPM Hannah, I am interested in your order
Post by: merlin64 on Wed, 16 March 2016, 09:18:32
Post by: E3E on Sun, 20 March 2016, 12:56:42
My order is up for grabs again as previous arrangements did not go through.
I'm order #12, so I'm in the first round. Feel free to PM me if you want to buy my spot.
Silver Aluminum Top, Blue Grey Aluminum Bottom, Aluminum Plate, Flat Angled Bottom, Duck Feet.
Plans were to put this together with GMK SNES (silver to match the lighter grey of the set/system and blue grey to coordinate with the darker grey). It was a fun idea, but I really do not need this anymore.
Post by: Chewypost on Sun, 20 March 2016, 13:37:14
Hey guys,
My order is up for grabs again as previous arrangements did not go through.
I'm order #12, so I'm in the first round. Feel free to PM me if you want to buy my spot.
Silver Aluminum Top, Blue Grey Aluminum Bottom, Aluminum Plate, Flat Angled Bottom, Duck Feet.
Plans were to put this together with GMK SNES (silver to match the lighter grey of the set/system and blue grey to coordinate with the darker grey). It was a fun idea, but I really do not need this anymore.
Ahh sucks to hear that you're giving it up :(
I'm guessing it's not possible to edit the order?
Post by: E3E on Sun, 20 March 2016, 15:40:19
Hey guys,
My order is up for grabs again as previous arrangements did not go through.
I'm order #12, so I'm in the first round. Feel free to PM me if you want to buy my spot.
Silver Aluminum Top, Blue Grey Aluminum Bottom, Aluminum Plate, Flat Angled Bottom, Duck Feet.
Plans were to put this together with GMK SNES (silver to match the lighter grey of the set/system and blue grey to coordinate with the darker grey). It was a fun idea, but I really do not need this anymore.
Ahh sucks to hear that you're giving it up :(
I'm guessing it's not possible to edit the order?
I don't think so! D: We have no idea if these are in production or not either. Elton has been a bit AFK AFGH AWOL-ish lately, though I have no doubt in him.
Post by: WNovizar on Sun, 20 March 2016, 15:58:12
Hey guys,
My order is up for grabs again as previous arrangements did not go through.
I'm order #12, so I'm in the first round. Feel free to PM me if you want to buy my spot.
Silver Aluminum Top, Blue Grey Aluminum Bottom, Aluminum Plate, Flat Angled Bottom, Duck Feet.
Plans were to put this together with GMK SNES (silver to match the lighter grey of the set/system and blue grey to coordinate with the darker grey). It was a fun idea, but I really do not need this anymore.
Ahh sucks to hear that you're giving it up :(
I'm guessing it's not possible to edit the order?
I don't think so! D: We have no idea if these are in production or not either. Elton has been a bit AFK AFGH AWOL-ish lately, though I have no doubt in him.
I want it. Ygpm
Post by: Chewypost on Sun, 20 March 2016, 16:07:18
Hey guys,
My order is up for grabs again as previous arrangements did not go through.
I'm order #12, so I'm in the first round. Feel free to PM me if you want to buy my spot.
Silver Aluminum Top, Blue Grey Aluminum Bottom, Aluminum Plate, Flat Angled Bottom, Duck Feet.
Plans were to put this together with GMK SNES (silver to match the lighter grey of the set/system and blue grey to coordinate with the darker grey). It was a fun idea, but I really do not need this anymore.
Ahh sucks to hear that you're giving it up :(
I'm guessing it's not possible to edit the order?
I don't think so! D: We have no idea if these are in production or not either. Elton has been a bit AFK AFGH AWOL-ish lately, though I have no doubt in him.
Shame to hear that. I woulda taken it if it was possible to edit the order. But it looks like you got someone who's interested!
Post by: xondat on Sun, 20 March 2016, 16:42:06
Hey guys,
My order is up for grabs again as previous arrangements did not go through.
I'm order #12, so I'm in the first round. Feel free to PM me if you want to buy my spot.
Silver Aluminum Top, Blue Grey Aluminum Bottom, Aluminum Plate, Flat Angled Bottom, Duck Feet.
Plans were to put this together with GMK SNES (silver to match the lighter grey of the set/system and blue grey to coordinate with the darker grey). It was a fun idea, but I really do not need this anymore.
What's the overall cost of this? I might be able to pick it back up haha
Pm'd. Didn't see that.
Post by: KetchyKech on Sun, 20 March 2016, 18:33:31
Hey guys,
My order is up for grabs again as previous arrangements did not go through.
I'm order #12, so I'm in the first round. Feel free to PM me if you want to buy my spot.
Silver Aluminum Top, Blue Grey Aluminum Bottom, Aluminum Plate, Flat Angled Bottom, Duck Feet.
Plans were to put this together with GMK SNES (silver to match the lighter grey of the set/system and blue grey to coordinate with the darker grey). It was a fun idea, but I really do not need this anymore.
awww man...i was really looking forward to seeing this~ well you have a oct. v1 so, I guess you wont be missing out on all that much! :cool:
Post by: E3E on Sun, 20 March 2016, 18:38:13
Hey guys,
My order is up for grabs again as previous arrangements did not go through.
I'm order #12, so I'm in the first round. Feel free to PM me if you want to buy my spot.
Silver Aluminum Top, Blue Grey Aluminum Bottom, Aluminum Plate, Flat Angled Bottom, Duck Feet.
Plans were to put this together with GMK SNES (silver to match the lighter grey of the set/system and blue grey to coordinate with the darker grey). It was a fun idea, but I really do not need this anymore.
awww man...i was really looking forward to seeing this~ well you have a oct. v1 so, I guess you wont be missing out on all that much! :cool:
Haha, sorry to disappoint! I do have an Orion v2 now as well, so I'm pretty much not missing out on anything, haha. This successor to my v1 is pretty much a baby Orion v2, hehe.
Yeah, the build concept was really something I was excited about, but I don't think I can reasonably hang onto the order right now.
Post by: KetchyKech on Sun, 20 March 2016, 18:43:32
Hey guys,
My order is up for grabs again as previous arrangements did not go through.
I'm order #12, so I'm in the first round. Feel free to PM me if you want to buy my spot.
Silver Aluminum Top, Blue Grey Aluminum Bottom, Aluminum Plate, Flat Angled Bottom, Duck Feet.
Plans were to put this together with GMK SNES (silver to match the lighter grey of the set/system and blue grey to coordinate with the darker grey). It was a fun idea, but I really do not need this anymore.
awww man...i was really looking forward to seeing this~ well you have a oct. v1 so, I guess you wont be missing out on all that much! :cool:
Haha, sorry to disappoint! I do have an Orion v2 now as well, so I'm pretty much not missing out on anything, haha. This successor to my v1 is pretty much a baby Orion v2, hehe.
Yeah, the build concept was really something I was excited about, but I don't think I can reasonably hang onto the order right now.
Absolutely, all the duck boards are becoming pretty similar aesthetically-- (not a bad thing)--If i were your shoes I certainly wouldn't spring for v2 of a item I already own--if I was planning other projects that were different and varied. Also circumstances change all the time, of course, & whats reasonable one day, may not be the next! G'luck & look forward to what else you come up with!
Someone grab this man's order before I convince myself I need another :p (really holding out to see what this "trinity" business is about though :p)
Post by: KetchyKech on Sun, 20 March 2016, 18:46:30
Blackbird!?! :eek: Why haven't I heard about this till now omg
(http://cfile2.uf.tistory.com/image/215C744856EAA5D1120B68)
(http://cfile4.uf.tistory.com/image/2358754856EAA5D2163571)
perhaps this is what codename:trinity was ?
Post by: alienman82 on Sun, 20 March 2016, 19:05:07
Post by: KetchyKech on Sun, 20 March 2016, 20:03:11
umm, speaking of which....wtf is this!! http://duck0113.tistory.com/130 (http://duck0113.tistory.com/130)
Blackbird!?! :eek: Why haven't I heard about this till now omgShow Image(http://cfile2.uf.tistory.com/image/215C744856EAA5D1120B68)Show Image(http://cfile4.uf.tistory.com/image/2358754856EAA5D2163571)
perhaps this is what codename:trinity was ?
That looks quite amazing
It certainly does!! I need this in my life basically ~ sighs `~ gotta make room for VE:A and this in the budget now :'(
...if im lucky to get into a run of these :eek:
Post by: E3E on Sun, 20 March 2016, 22:10:26
Okay, so it is official.
I have transferred my order to WNovizar (https://geekhack.org/index.php?action=profile;u=54288) and the invoice has been paid, so please consider this an indicator of that transaction.
I know that Elton is AWOL atm, but if WNovizar needs to verify, this will be here, and I will also personally verify the transfer as well.
Post by: WNovizar on Sun, 20 March 2016, 22:14:26
Well, that was quick!
Okay, so it is official.
I have transferred my order to WNovizar (https://geekhack.org/index.php?action=profile;u=54288) and the invoice has been paid, so please consider this an indicator of that transaction.
I know that Elton is AWOL atm, but if WNovizar needs to verify, this will be here, and I will also personally verify the transfer as well.
Transfer confirmed. Now too look for on what should I do about those acrylic flat bottom w/ duck feet. Any suggestions for pcb, top, and plates?
Post by: E3E on Sun, 20 March 2016, 22:24:02
Well, that was quick!
Okay, so it is official.
I have transferred my order to WNovizar (https://geekhack.org/index.php?action=profile;u=54288) and the invoice has been paid, so please consider this an indicator of that transaction.
I know that Elton is AWOL atm, but if WNovizar needs to verify, this will be here, and I will also personally verify the transfer as well.
Transfer confirmed. Now too look for on what should I do about those acrylic flat bottom w/ duck feet. Any suggestions for pcb, top, and plates?
I would have switched them out every now and then, but someone might want to buy the bottom off of you. A lot of people regretted not buying the flat bottom for the Orion v2.
I'm not sure what tops would be compatible, to be honest. Since it's a flat bottom, any 75% should be compatible since you don't have to worry about USB placement. I'd get a top 3D printed or CNC'd if I were you; if you really want to create another board altogether.
Post by: WNovizar on Sun, 20 March 2016, 22:48:04
Well, that was quick!
Okay, so it is official.
I have transferred my order to WNovizar (https://geekhack.org/index.php?action=profile;u=54288) and the invoice has been paid, so please consider this an indicator of that transaction.
I know that Elton is AWOL atm, but if WNovizar needs to verify, this will be here, and I will also personally verify the transfer as well.
Transfer confirmed. Now too look for on what should I do about those acrylic flat bottom w/ duck feet. Any suggestions for pcb, top, and plates?
I would have switched them out every now and then, but someone might want to buy the bottom off of you. A lot of people regretted not buying the flat bottom for the Orion v2.
I'm not sure what tops would be compatible, to be honest. Since it's a flat bottom, any 75% should be compatible since you don't have to worry about USB placement. I'd get a top 3D printed or CNC'd if I were you; if you really want to create another board altogether.
Are you saying that the bottom housing is compatible with Duck Orion?
Post by: Chewypost on Sun, 20 March 2016, 22:55:10
Well, that was quick!
Okay, so it is official.
I have transferred my order to WNovizar (https://geekhack.org/index.php?action=profile;u=54288) and the invoice has been paid, so please consider this an indicator of that transaction.
I know that Elton is AWOL atm, but if WNovizar needs to verify, this will be here, and I will also personally verify the transfer as well.
Transfer confirmed. Now too look for on what should I do about those acrylic flat bottom w/ duck feet. Any suggestions for pcb, top, and plates?
I'll buy those duck feet off of you :D
Post by: E3E on Sun, 20 March 2016, 23:05:20
Are you saying that the bottom housing is compatible with Duck Orion?
No, it isn't at all. It's just that many people voiced being disappointed about not having picked up the flat bottom with the Orion v2, so I didn't want to make the same mistake with the Octagon v2 and went for it.
Post by: MoarCoffeePlzzz on Sun, 20 March 2016, 23:24:27
Post by: E3E on Sun, 20 March 2016, 23:25:12
Wish this was still open. Came in a bit late!
Throw out a line and you'll probably catch something. A lot of people have been giving up their positions lately!
Post by: ika on Mon, 21 March 2016, 00:01:13
Post by: E3E on Mon, 21 March 2016, 00:15:23
If you guys haven't already PMed Elton about the order transfer, I suggest you do so. It's much easier for him to track changes through PMs than by watching his threads.
I was actually drafting a PM, but forgot about it because the invoice hadn't been paid at the time. Thanks for the reminder. :thumb:
Post by: WNovizar on Mon, 21 March 2016, 02:44:27
If you guys haven't already PMed Elton about the order transfer, I suggest you do so. It's much easier for him to track changes through PMs than by watching his threads.
I was actually drafting a PM, but forgot about it because the invoice hadn't been paid at the time. Thanks for the reminder. :thumb:
I already replied your PM to elton, with my shipping address. :thumb: :thumb:
Post by: HannahPeach on Sat, 26 March 2016, 17:21:53
Letting go of my order (order 20), shoot me a message for any details.
nooooo hannah whyyyyy
Also any news on this shipping?
I have reconsidered and I am still in on this, so no worries! :D
Post by: ctrlX on Tue, 29 March 2016, 01:04:54
http://duck0113.tistory.com/m/post/126
Cheers!
Post by: Chewypost on Tue, 29 March 2016, 01:06:47
Does anyone know where I can get Cherry clear tops as seen on Duck's site?
http://duck0113.tistory.com/m/post/126
Cheers!
If you look closely, they're actually Gaterons and not cherry
Post by: ctrlX on Tue, 29 March 2016, 01:34:31
Does anyone know where I can get Cherry clear tops as seen on Duck's site?
http://duck0113.tistory.com/m/post/126
Cheers!
If you look closely, they're actually Gaterons and not cherry
Ahaaaa, cool! :-)
Are there official Cherry transparent/clear tops available? If not, could I use Gaterons with Cherry?
Post by: popkorn62 on Tue, 29 March 2016, 02:05:21
I believe there are Cherry RGB switches which are pretty hard (impossible??) to find. you can swap the clear housing from gaterons to cherry though I believe!Does anyone know where I can get Cherry clear tops as seen on Duck's site?
http://duck0113.tistory.com/m/post/126
Cheers!
If you look closely, they're actually Gaterons and not cherry
Ahaaaa, cool! :-)
Are there official Cherry transparent/clear tops available? If not, could I use Gaterons with Cherry?
Post by: ctrlX on Tue, 29 March 2016, 02:20:28
I believe there are Cherry RGB switches which are pretty hard (impossible??) to find. you can swap the clear housing from gaterons to cherry though I believe!Does anyone know where I can get Cherry clear tops as seen on Duck's site?
http://duck0113.tistory.com/m/post/126
Cheers!
If you look closely, they're actually Gaterons and not cherry
Ahaaaa, cool! :-)
Are there official Cherry transparent/clear tops available? If not, could I use Gaterons with Cherry?
Thanks for the info. I've got ~100 65g R1 Zealios that I could use for that. I'll probably not use them anyway. Although it is a wee bit of a shame to use them for that purpose. Initially I was on planning to sell them cheaply.
Post by: E3E on Tue, 29 March 2016, 03:54:27
I believe there are Cherry RGB switches which are pretty hard (impossible??) to find. you can swap the clear housing from gaterons to cherry though I believe!
Best bet would be to use an RGB Corsair K-series board as a donor for those. The tops don't have slots for in-switch LEDs though, so you can't get the the classic nixie look exact with them.
Post by: onmybikedrunk on Tue, 29 March 2016, 16:33:34
They're available on Taobao...I believe there are Cherry RGB switches which are pretty hard (impossible??) to find. you can swap the clear housing from gaterons to cherry though I believe!Does anyone know where I can get Cherry clear tops as seen on Duck's site?
http://duck0113.tistory.com/m/post/126 (http://duck0113.tistory.com/m/post/126)
Cheers!
If you look closely, they're actually Gaterons and not cherry
Ahaaaa, cool! :-)
Are there official Cherry transparent/clear tops available? If not, could I use Gaterons with Cherry?
Thanks for the info. I've got ~100 65g R1 Zealios that I could use for that. I'll probably not use them anyway. Although it is a wee bit of a shame to use them for that purpose. Initially I was on planning to sell them cheaply.
https://world.taobao.com/item/520160330432.htm?spm=a312a.7700714.0.0.yhrZTI#detail (https://world.taobao.com/item/520160330432.htm?spm=a312a.7700714.0.0.yhrZTI#detail)
Post by: ctrlX on Tue, 29 March 2016, 17:38:27
Thanks!They're available on Taobao...I believe there are Cherry RGB switches which are pretty hard (impossible??) to find. you can swap the clear housing from gaterons to cherry though I believe!Does anyone know where I can get Cherry clear tops as seen on Duck's site?
http://duck0113.tistory.com/m/post/126 (http://duck0113.tistory.com/m/post/126)
Cheers!
If you look closely, they're actually Gaterons and not cherry
Ahaaaa, cool! :-)
Are there official Cherry transparent/clear tops available? If not, could I use Gaterons with Cherry?
Thanks for the info. I've got ~100 65g R1 Zealios that I could use for that. I'll probably not use them anyway. Although it is a wee bit of a shame to use them for that purpose. Initially I was on planning to sell them cheaply.
https://world.taobao.com/item/520160330432.htm?spm=a312a.7700714.0.0.yhrZTI#detail (https://world.taobao.com/item/520160330432.htm?spm=a312a.7700714.0.0.yhrZTI#detail)
Post by: NoahNHP on Tue, 29 March 2016, 21:07:17
Post by: thatsmrdoctortoyou on Tue, 29 March 2016, 21:25:01
Condolences.
Post by: elton5354 on Tue, 05 April 2016, 18:45:52
There isn't much to update, but the 1st batch should be ready soon..
I wonder if the un-invoiced participates still want in..:\
Post by: laughatpain on Tue, 05 April 2016, 19:16:55
Post by: duckness on Tue, 05 April 2016, 22:27:04
the 1st batch should be ready soon..(http://i.imgur.com/NUyttbn.gif)
Post by: mrboovn on Tue, 05 April 2016, 22:37:36
Sorry for the absence. I've updated everything and answered most of my PMs regarding this GB. Hope I did not disappoint anyone :Owow that's fast.Thanks for great news elton :thumb: :thumb:
There isn't much to update, but the 1st batch should be ready soon..
I wonder if the un-invoiced participates still want in..:\
Post by: ika on Tue, 05 April 2016, 23:14:44
Post by: Weiss on Tue, 05 April 2016, 23:18:59
There isn't much to update, but the 1st batch should be ready soon..(http://i.imgur.com/tNWFvTn.gif)
Post by: joostflux on Tue, 05 April 2016, 23:44:01
Second, this may be a dumb question but I know there are two groups and the first one of course only includes the first 30. My question is do we go by the number on the left of the Google doc or the number on the far right next to our invoice?
Post by: ctrlX on Tue, 05 April 2016, 23:55:23
totally expected this to take another 7-8 months like the Orion did... I am not ready for this to show up anytime soon O_OSame here... Just the other day I was contemplating to PM elton and ask if I could make a change in my order. Thought there was plenty of time left.
Now I am REALLY glad I jumped on the Zealios R2 GB.
Post by: Jin on Wed, 06 April 2016, 00:09:00
Post by: GOGOMA on Wed, 06 April 2016, 03:25:23
(http://i.imgur.com/pe3ehEs.jpg)
(http://i.imgur.com/JsV10ZM.jpg)
(http://i.imgur.com/CJbwdoH.jpg)
Post by: E3E on Wed, 06 April 2016, 03:26:28
Post by: WNovizar on Wed, 06 April 2016, 03:29:46
Post by: zennasyndroxx on Wed, 06 April 2016, 03:57:03
Post by: popkorn62 on Wed, 06 April 2016, 05:03:14
Post by: kurtle107 on Wed, 06 April 2016, 05:03:47
Post by: omgar on Wed, 06 April 2016, 09:56:41
Sorry for the absence. I've updated everything and answered most of my PMs regarding this GB. Hope I did not disappoint anyone :O
There isn't much to update, but the 1st batch should be ready soon..
I wonder if the un-invoiced participates still want in..:\
Oh my. Super excited for this.
Post by: elton5354 on Wed, 06 April 2016, 13:04:51
Post by: aaron6301 on Wed, 06 April 2016, 13:45:10
Yeah, they just sent out Korean orders this week and they probably can ship out our 1st batch next week.So pumped for this. Hopefully this means batch 2 orders will be done sooner than anticipated as well.
Post by: 64rky on Wed, 06 April 2016, 13:46:40
Yeah, they just sent out Korean orders this week and they probably can ship out our 1st batch next week.
NEXT WEEK!? better order my LEDs
Post by: Dreamre on Wed, 06 April 2016, 13:51:02
Yeah, they just sent out Korean orders this week and they probably can ship out our 1st batch next week.
Elton, I owe you a dinner date! :)) :) ;) ;D :-*
Post by: tkpresent on Wed, 06 April 2016, 19:50:05
Yeah, they just sent out Korean orders this week and they probably can ship out our 1st batch next week.
Also wondering when the 2nd batch would be?
Post by: havenlau on Wed, 06 April 2016, 21:35:47
It's even better right now since the CAD went back up.. a little :-X
Post by: HannahPeach on Wed, 06 April 2016, 22:01:15
Yeah, they just sent out Korean orders this week and they probably can ship out our 1st batch next week.
NEXT WEEK!? better order my LEDs
Good on you to rermind me of that!!
Post by: merlin64 on Thu, 14 April 2016, 10:00:01
Are the switch LEDs SMD and through-hole?
Post by: 64rky on Thu, 14 April 2016, 10:15:33
Does anyone know what LEDs are going to be needed?
Are the switch LEDs SMD and through-hole?
Assuming the same as Orion, 1.8 mm. I got mine from lighthouse.
Post by: E3E on Thu, 14 April 2016, 17:28:33
Does anyone know what LEDs are going to be needed?
Are the switch LEDs SMD and through-hole?
I don't think you'll need to worry about soldering the SMD RGB LEDs, but I Don't know about SMD in-switch LEDs. Everything else should be soldered already.
Post by: Venatorious on Fri, 15 April 2016, 04:37:22
Post by: omgar on Fri, 15 April 2016, 09:47:07
I heard some people dropped out, does that mean there are extra's?
You can't really just "drop out". Only option is for someone to sell their order.
Post by: boo on Fri, 15 April 2016, 10:03:01
Post by: elton5354 on Fri, 15 April 2016, 23:01:03
The 1st batch is almost ready to be shipped. Truecustom is working hard on filling up the custom shipping forms right now.
Post by: Venatorious on Fri, 15 April 2016, 23:25:55
EDIT: Dumb question I guess :rolleyes:
Post by: laughatpain on Sat, 16 April 2016, 01:24:42
Post by: Weiss on Sat, 16 April 2016, 01:37:31
Is there an estimate as to how long it would take round 3 to ship?
Assuming all rounds follow the same sort of scheme that Round 1 followed, Round 3 would probably hit your doorstep in November. That's assuming creation of all the parts takes 2 months like Round 1 did and then giving like a month of leeway for shipping and such.
Post by: lootbag on Sat, 16 April 2016, 03:34:17
There will be a 3rd batch, so I'll open back the order form after the first batch is shipped.
The 1st batch is almost ready to be shipped. Truecustom is working hard on filling up the custom shipping forms right now.
Very pleased to see this GB moving along at such a quick pace.
Any idea when the 2nd batch will ship?
Reason is, my address may change in the next 2-3 months.
Post by: WNovizar on Sat, 16 April 2016, 03:45:11
Post by: HannahPeach on Sat, 16 April 2016, 10:31:32
There will be a 3rd batch, so I'll open back the order form after the first batch is shipped.
The 1st batch is almost ready to be shipped. Truecustom is working hard on filling up the custom shipping forms right now.
(https://media.giphy.com/media/UO2FqRJkan6bm/giphy.gif)
Post by: onmybikedrunk on Sat, 16 April 2016, 15:49:33
There will be a 3rd batch, so I'll open back the order form after the first batch is shipped.I am so grateful for this! Thanks Elton/Duck everybody!
The 1st batch is almost ready to be shipped. Truecustom is working hard on filling up the custom shipping forms right now.
Post by: hkf on Sun, 17 April 2016, 07:12:57
Post by: oatmicro on Sun, 17 April 2016, 08:53:03
Post by: ultraman982 on Mon, 18 April 2016, 16:31:10
Name you price! Will pay over what you did. Will also pay extra if you want to do full assembly!
Post by: cmd on Mon, 18 April 2016, 16:38:37
I know I'm late for this...but if anyone wants to sell me theirs let me know. (Full Set, so top housing, aluminum bottom, plate and pcb)There will be a third batch, my dood
Name you price! Will pay over what you did. Will also pay extra if you want to do full assembly!
Sent from my Nexus 6P using Tapatalk
Post by: elton5354 on Mon, 18 April 2016, 20:48:17
https://docs.google.com/spreadsheets/d/19enJgC0uMUPcQd_qNDn1UH7A2x2IJJie3UGb4l3U7MU/pubhtml?gid=1358261006&single=true
You can track them here: http://www.koreapost.go.kr/eng/sub/EMS_Search.jsp?contId=e1020600
You can also track them with your local postal service website.
Post by: Butter on Mon, 18 April 2016, 20:57:10
Tracking is up for the 1st batch!
https://docs.google.com/spreadsheets/d/19enJgC0uMUPcQd_qNDn1UH7A2x2IJJie3UGb4l3U7MU/pubhtml?gid=1358261006&single=true
You can track them here: http://www.koreapost.go.kr/eng/sub/EMS_Search.jsp?contId=e1020600
You can also track them with your local postal service website.
Thank you for doing this!! first duck :))
Post by: WNovizar on Mon, 18 April 2016, 21:02:44
Sent from my E5563 using Tapatalk
Post by: elton5354 on Mon, 18 April 2016, 21:06:02
That doc is set to private. So please approve my access elton
Sent from my E5563 using Tapatalk
It shouldn't be. The URL link should be accessible to the public. I can't give you access to the main spreadsheet as there are other info in there..but your order is
EG169212373KR WNovizar Silver Blue Grey Aluminum Bottom Aluminum Flat Acrylic Bottom with Chrome feet 1
Post by: WNovizar on Mon, 18 April 2016, 21:07:24
Sent from my E5563 using Tapatalk
Post by: elton5354 on Mon, 18 April 2016, 21:09:47
Post by: yuktsi on Mon, 18 April 2016, 21:12:46
Or anybody selling?
Post by: WNovizar on Mon, 18 April 2016, 21:15:03
Post by: omgar on Mon, 18 April 2016, 21:24:53
Tracking is up for the 1st batch!
https://docs.google.com/spreadsheets/d/19enJgC0uMUPcQd_qNDn1UH7A2x2IJJie3UGb4l3U7MU/pubhtml?gid=1358261006&single=true
You can track them here: http://www.koreapost.go.kr/eng/sub/EMS_Search.jsp?contId=e1020600
You can also track them with your local postal service website.
So close! I'm at spot #30. Do you have an idea of when the second batch will ship Elton?
Post by: mrboovn on Mon, 18 April 2016, 21:36:29
Tracking is up for the 1st batch!Thanks for updating Elton :thumb:
https://docs.google.com/spreadsheets/d/19enJgC0uMUPcQd_qNDn1UH7A2x2IJJie3UGb4l3U7MU/pubhtml?gid=1358261006&single=true
You can track them here: http://www.koreapost.go.kr/eng/sub/EMS_Search.jsp?contId=e1020600
You can also track them with your local postal service website.
Post by: popkorn62 on Mon, 18 April 2016, 21:56:13
Post by: Pemdas on Tue, 19 April 2016, 00:05:49
Tracking is up for the 1st batch!
https://docs.google.com/spreadsheets/d/19enJgC0uMUPcQd_qNDn1UH7A2x2IJJie3UGb4l3U7MU/pubhtml?gid=1358261006&single=true
You can track them here: http://www.koreapost.go.kr/eng/sub/EMS_Search.jsp?contId=e1020600
You can also track them with your local postal service website.
Yes! What a quick turnaround! Thanks elton and duck :thumb:
I really need to source some gold stabs now...
Post by: beltet on Tue, 19 April 2016, 01:04:52
Do you still use the old list? I have kept my place in case this happens.
Post by: zoomwalt on Tue, 19 April 2016, 01:52:44
Popkorn - your avatar made me sad :( My 15 year old dog passed away on Saturday and he looked like your avatar (he was a Jindo but had the same fur color).
Anyways - do I need to monitor this to get in on around 3? or will I be notified somehow?
Post by: ctrlX on Tue, 19 April 2016, 08:09:16
Now I just need to decide if this will be my first ANSI board or if I should just stick to ISO SE layout.
Sent from my Nexus 5X using Tapatalk
Post by: blighty on Tue, 19 April 2016, 08:19:06
Timing could not be better. Received 65g Zealios a couple of days ago. :-)
Now I just need to decide if this will be my first ANSI board or if I should just stick to ISO SE layout.
Sent from my Nexus 5X using Tapatalk
Does the pcb support the 1.25u left shift? The pcb drawing in the OP doesnt show the holes for the switch, although the plate looks to support both options.
Post by: ctrlX on Tue, 19 April 2016, 08:22:22
Exactly. Hence it will be my first ANSI, but if it does support ISO, i.e. PCB drawing is incorrect, I will have a hard time deciding. :-)Timing could not be better. Received 65g Zealios a couple of days ago. :-)
Now I just need to decide if this will be my first ANSI board or if I should just stick to ISO SE layout.
Sent from my Nexus 5X using Tapatalk
Does the pcb support the 1.25u left shift? The pcb drawing in the OP doesnt show the holes for the switch, although the plate looks to support both options.
Sent from my Nexus 5X using Tapatalk
Post by: duckness on Wed, 20 April 2016, 01:56:57
(http://i.imgur.com/TAu3Hlt.jpg)
Post by: onmybikedrunk on Wed, 20 April 2016, 02:50:00
To say the least, even just seeing the board all rapped up like what's above makes me cream my panties. Thanks Elton! Thanks Duck!
Post by: Weiss on Wed, 20 April 2016, 04:21:02
really fast shippingShow Image(http://i.imgur.com/TAu3Hlt.jpg)
Wow! :eek:
Now I really can't wait for mine...
Post by: kenshinjeff on Wed, 20 April 2016, 08:00:30
really fast shippingShow Image(http://i.imgur.com/TAu3Hlt.jpg)
Post by: HannahPeach on Wed, 20 April 2016, 08:04:06
really fast shippingShow Image(http://i.imgur.com/TAu3Hlt.jpg)
mine's in customs :(
Post by: T0mb3ry on Wed, 20 April 2016, 11:08:34
really fast shippingShow Image(http://i.imgur.com/TAu3Hlt.jpg)
mine's in customs :(
Same here. Hope i dont need to visit customs.
Post by: HannahPeach on Wed, 20 April 2016, 11:33:14
really fast shippingShow Image(http://i.imgur.com/TAu3Hlt.jpg)
mine's in customs :(
Same here. Hope i dont need to visit customs.
I'm just wondering if the declarations are filled out correctly, with the actual prices that were paid.
Post by: duckness on Wed, 20 April 2016, 11:34:34
I'm just wondering if the declarations are filled out correctly, with the actual prices that were paid.mine was declared as 35
Post by: HannahPeach on Wed, 20 April 2016, 12:09:17
I'm just wondering if the declarations are filled out correctly, with the actual prices that were paid.mine was declared as 35
Awesome!
Post by: nguyenkimtam on Wed, 20 April 2016, 12:52:34
(http://i.imgur.com/wQMWsdl.jpg)
Post by: tuco on Wed, 20 April 2016, 13:49:24
Post by: T0mb3ry on Wed, 20 April 2016, 14:06:43
really fast shippingShow Image(http://i.imgur.com/TAu3Hlt.jpg)
mine's in customs :(
Same here. Hope i dont need to visit customs.
I'm just wondering if the declarations are filled out correctly, with the actual prices that were paid.
AFAIK our customs dont care as long the item is under 20euros.
Post by: tkpresent on Wed, 20 April 2016, 14:09:21
:cool:Show Image(http://i.imgur.com/wQMWsdl.jpg)
Congratulations!
Just wondering where we can buy the brass plate?
Post by: Data on Wed, 20 April 2016, 14:25:20
Post by: ika on Wed, 20 April 2016, 14:26:11
Post by: blighty on Wed, 20 April 2016, 14:28:01
Exactly. Hence it will be my first ANSI, but if it does support ISO, i.e. PCB drawing is incorrect, I will have a hard time deciding. :-)Timing could not be better. Received 65g Zealios a couple of days ago. :-)
Now I just need to decide if this will be my first ANSI board or if I should just stick to ISO SE layout.
Sent from my Nexus 5X using Tapatalk
Does the pcb support the 1.25u left shift? The pcb drawing in the OP doesnt show the holes for the switch, although the plate looks to support both options.
Sent from my Nexus 5X using Tapatalk
FYI, full ISO support (small left shift/1u) :)
Post by: CornCha0s on Wed, 20 April 2016, 14:38:00
really fast shippingShow Image(http://i.imgur.com/TAu3Hlt.jpg)
mine's in customs :(
Same here. Hope i dont need to visit customs.
I'm just wondering if the declarations are filled out correctly, with the actual prices that were paid.
AFAIK our customs dont care as long the item is under 20euros.
They won't care as long as it's under 23€, but if you have to pick up the package from the custom's office you'll have to show them proof of payment so it won't matter what value was used in the declaration.
Post by: HannahPeach on Wed, 20 April 2016, 14:47:44
really fast shippingShow Image(http://i.imgur.com/TAu3Hlt.jpg)
mine's in customs :(
Same here. Hope i dont need to visit customs.
I'm just wondering if the declarations are filled out correctly, with the actual prices that were paid.
AFAIK our customs dont care as long the item is under 20euros.
They won't care as long as it's under 23€, but if you have to pick up the package from the custom's office you'll have to show them proof of payment so it won't matter what value was used in the declaration.
Whether or not they care solely depends on the customs office you're looking at.
Some do, some don't..
Post by: Pemdas on Wed, 20 April 2016, 15:00:30
Didn't expect it to be so fast!
Post by: blighty on Wed, 20 April 2016, 18:37:01
edit:http://kbdlab.co.kr/index.php?mid=board_sw&document_srl=100301 (http://kbdlab.co.kr/index.php?mid=board_sw&document_srl=100301)
Post by: Butter on Wed, 20 April 2016, 19:13:12
(http://i.imgur.com/JK13v58.jpg)
Post by: ctrlX on Wed, 20 April 2016, 23:37:16
Yeeeha!Exactly. Hence it will be my first ANSI, but if it does support ISO, i.e. PCB drawing is incorrect, I will have a hard time deciding. :-)Timing could not be better. Received 65g Zealios a couple of days ago. :-)
Now I just need to decide if this will be my first ANSI board or if I should just stick to ISO SE layout.
Sent from my Nexus 5X using Tapatalk
Does the pcb support the 1.25u left shift? The pcb drawing in the OP doesnt show the holes for the switch, although the plate looks to support both options.
Sent from my Nexus 5X using Tapatalk
FYI, full ISO support (small left shift/1u) :)
Now the hard part... To ANSI, or not to ANSI.
Sent from my Nexus 5X using Tapatalk
Post by: Venatorious on Wed, 20 April 2016, 23:39:41
Post by: Pemdas on Thu, 21 April 2016, 14:44:44
Got my octagon today!! EMS is seriously fast :eek:
Thanks again to elton and duck. Gotta wait a few days for other parts to come in before I can start building it though :(
Post by: tuco on Thu, 21 April 2016, 15:09:02
So how can I tell the LED polarity? It have nothing on the pcb. Also anyone know how can I use this part? ThanksShow Image(http://i.imgur.com/JK13v58.jpg)
The one that has the trace will be the positive.
Post by: blighty on Thu, 21 April 2016, 15:16:00
[attach=2]
[attach=3]
I must say, I'm loving the feel of the black-bottomed gateron reds. Thanks for running another great buy elton!
Post by: aaron6301 on Thu, 21 April 2016, 15:54:33
(Attachment Link)
(Attachment Link)
(Attachment Link)
I must say, I'm loving the feel of the black-bottomed gateron reds. Thanks for running another great buy elton!
Fancy! Now with the lights on if you will :thumb:
Post by: Butter on Thu, 21 April 2016, 15:59:40
So how can I tell the LED polarity? It have nothing on the pcb. Also anyone know how can I use this part? ThanksShow Image(http://i.imgur.com/JK13v58.jpg)
The one that has the trace will be the positive.
Thanks. I end it up putting sip socket on it.
Post by: blighty on Thu, 21 April 2016, 17:00:20
(Attachment Link)
(Attachment Link)
(Attachment Link)
I must say, I'm loving the feel of the black-bottomed gateron reds. Thanks for running another great buy elton!
Fancy! Now with the lights on if you will :thumb:
I'm sure someone will post some daylight pics. Just not me (caps are dirty). :)
Post by: adamski07 on Thu, 21 April 2016, 17:31:32
Post by: elton5354 on Thu, 21 April 2016, 21:35:08
Anyway, I'll open up the order form for the rest of the 3rd batch orders on Friday April 22 at 6PM EST.
Post by: mrboovn on Thu, 21 April 2016, 23:09:44
Post by: Karosu on Fri, 22 April 2016, 00:00:42
Post by: Venatorious on Fri, 22 April 2016, 00:03:43
Post by: mrboovn on Fri, 22 April 2016, 00:16:47
Hi guys, I'm pretty new to mech keyboards and I saw this posted on reddit.. does this keyboard come assembled?DIY-kit only :D
Post by: nugglets on Fri, 22 April 2016, 00:36:59
Post by: GL1TCH3D on Fri, 22 April 2016, 01:05:33
Post by: witbliz on Fri, 22 April 2016, 10:01:54
Post by: qqeyes on Fri, 22 April 2016, 12:54:27
Post by: -musubi on Fri, 22 April 2016, 13:12:25
Post by: alienman82 on Fri, 22 April 2016, 13:14:12
Post by: HannahPeach on Fri, 22 April 2016, 16:45:13
(Attachment Link)
(Attachment Link)
(Attachment Link)
I must say, I'm loving the feel of the black-bottomed gateron reds. Thanks for running another great buy elton!
Which program did you use for programming your board, if I may ask? Duck's blog doesn't seem to be updated with a new firmware, at least as far as I can see.
Post by: hkf on Fri, 22 April 2016, 17:00:12
Post by: -musubi on Fri, 22 April 2016, 17:01:28
Post by: Gengarfan on Fri, 22 April 2016, 17:05:15
Post by: cmd on Fri, 22 April 2016, 17:06:51
Filled it out! Just want to make sure I did everything correctly though. Did we need the $45 feet if we got the aluminum bottom? And what difference does the aluminum or steel plate make? I chose aluminum.
Negative. If you got the bottom aluminum casing you are golden. Duck feet would be optional if you got the acrylic flat bottom.
Post by: Gengarfan on Fri, 22 April 2016, 17:10:12
Filled it out! Just want to make sure I did everything correctly though. Did we need the $45 feet if we got the aluminum bottom? And what difference does the aluminum or steel plate make? I chose aluminum.
Negative. If you got the bottom aluminum casing you are golden. Duck feet would be optional if you got the acrylic flat bottom.
Thanks for the fast reply! And just to give me peace of mind, we were supposed to fill out the order form on the first page of this thread even though it is still labeled the same?
Post by: cmd on Fri, 22 April 2016, 17:16:17
Filled it out! Just want to make sure I did everything correctly though. Did we need the $45 feet if we got the aluminum bottom? And what difference does the aluminum or steel plate make? I chose aluminum.
Negative. If you got the bottom aluminum casing you are golden. Duck feet would be optional if you got the acrylic flat bottom.
Thanks for the fast reply! And just to give me peace of mind, we were supposed to fill out the order form on the first page of this thread even though it is still labeled the same?
Yes, earlier this afternoon I checked up on it and it was still closed.
Bring back the Viper :-X Think I will hold out on this...a second time!
Post by: Pemdas on Fri, 22 April 2016, 18:30:10
(http://i.imgur.com/6xKmYGk.jpg)
Finished my Octagon v2! Gateron clears w/ 72g Sprit gold springs :cool:
Blue grey top and silver bottom + acrylic angled bottom
And a little build log, had to fix a screwup with a couple jumps. I really don't like desoldering:(
More
(http://i.imgur.com/mdUV0Ja.jpg)
(http://i.imgur.com/dYsYf9n.jpg)
(http://i.imgur.com/6UBVsQ9.jpg)
(http://i.imgur.com/rO9TkP8.jpg)
(http://i.imgur.com/KKaggv3.jpg)
(http://i.imgur.com/kC6IIGP.jpg)
(http://i.imgur.com/MHyfb5m.jpg)
(http://i.imgur.com/YnuDSD1.jpg)
(http://i.imgur.com/dYsYf9n.jpg)
(http://i.imgur.com/6UBVsQ9.jpg)
(http://i.imgur.com/rO9TkP8.jpg)
(http://i.imgur.com/KKaggv3.jpg)
(http://i.imgur.com/kC6IIGP.jpg)
(http://i.imgur.com/MHyfb5m.jpg)
(http://i.imgur.com/YnuDSD1.jpg)
Post by: tuco on Fri, 22 April 2016, 18:37:59
Thanks!
Post by: stratzi on Fri, 22 April 2016, 18:40:41
How do I buy one without having it shipped to my house?
I don't want my GF finding out i'm getting another mech because she'll probably kill me. You know the usual ;D
Post by: Butter on Fri, 22 April 2016, 18:40:50
What size LEDs fit in the 7 spots along the top?
Thanks!
I use 1.8mm with sip socket.
Post by: tuco on Fri, 22 April 2016, 18:44:10
What size LEDs fit in the 7 spots along the top?
Thanks!
I use 1.8mm with sip socket.
Awesome thanks, I have a nice stash of those so I should be set with everything I need once I get mine. It is in the second batch though.
Post by: boo on Fri, 22 April 2016, 19:11:32
Edit: Ordered :thumb:
Post by: gaiden on Fri, 22 April 2016, 19:20:08
Sent from my SM-G900T using Tapatalk
Post by: Venatorious on Fri, 22 April 2016, 19:28:33
Post by: Pemdas on Fri, 22 April 2016, 19:30:30
Post by: gaiden on Fri, 22 April 2016, 19:34:42
Sent from my SM-G900T using Tapatalk
Post by: ika on Fri, 22 April 2016, 19:48:47
No idea if anything has changed for v2.
Post by: airs on Fri, 22 April 2016, 20:00:00
Post by: gaiden on Fri, 22 April 2016, 20:42:08
Post by: Elaeagnifolia on Fri, 22 April 2016, 21:14:12
does anyone know how to view my current order and how to edit the order?
It looks like Elton doesn't have the edit order feature enabled for his Google Form, so you're going to have to PM him to have any changes made most likely.
Post by: mrboovn on Fri, 22 April 2016, 21:40:52
(http://i.imgur.com/HmjTcX1.jpg)
Post by: mrboovn on Fri, 22 April 2016, 21:41:49
Post by: ultraman982 on Fri, 22 April 2016, 22:43:20
You guys are getting them so quick..mine is still in a limbo with no tracking updates. :(
Anyway, I'll open up the order form for the rest of the 3rd batch orders on Friday April 22 at 6PM EST.
Just put my order in! Super excited!
Post by: WNovizar on Fri, 22 April 2016, 23:04:30
Sent from my E5563 using Tapatalk
Post by: elton5354 on Fri, 22 April 2016, 23:13:20
The package has arrived. Thanks elton, but I thought this GB included some LEDs for free right? I have not get them. Anyway, Where can I get CAD file for brass weight?
Sent from my E5563 using Tapatalk
It comes with RGB SMD LEDs already soldered on the PCB.
Post by: WNovizar on Sat, 23 April 2016, 00:04:03
Sent from my E5563 using Tapatalk
Post by: nguyenkimtam on Sat, 23 April 2016, 00:51:01
sorry for double post...so retarted
Post by: witbliz on Sat, 23 April 2016, 01:16:41
Sent from my iPhone using Tapatalk
Post by: hkf on Sat, 23 April 2016, 02:12:55
Hi guys where do I buy the stabilizers for this ? Zeal sold out so I was wondering where else stock them
Sent from my iPhone using Tapatalk
Gons or winkeyless
Post by: pmh1410 on Sat, 23 April 2016, 02:38:58
The package has arrived. Thanks elton, but I thought this GB included some LEDs for free right? I have not get them. Anyway, Where can I get CAD file for brass weight?
Sent from my E5563 using Tapatalk
you can buy WS2812B 5050 RGB LED Chip for replace if RGB led died
Post by: HannahPeach on Sat, 23 April 2016, 04:48:06
Hi guys where do I buy the stabilizers for this ? Zeal sold out so I was wondering where else stock them
Sent from my iPhone using Tapatalk
if you're in the EU 7bit is a good option!!
Post by: Arvid on Sat, 23 April 2016, 10:24:47
Anybody have the instructions for flashing keymaps?
Did you find anything?
Post by: Xiro7 on Sat, 23 April 2016, 10:35:57
Hi guys where do I buy the stabilizers for this ? Zeal sold out so I was wondering where else stock them
Sent from my iPhone using Tapatalk
If CONUS, Clueboard.io has them: https://shop.clueboard.co/Cherry-MX-PCB-Mount-Stabilizers-for-Clueboard.html
Post by: T0mb3ry on Sat, 23 April 2016, 10:42:42
Post by: blighty on Sat, 23 April 2016, 11:19:21
edit: added AppLocale for those who don't want to change system language to Korean.
Post by: Butter on Sat, 23 April 2016, 11:50:41
Here is the current keymapper. :-*
edit: added AppLocale for those who don't want to change system language to Korean.
Any idea which key is the flip key? My scroll lock isn't working.
Post by: blighty on Sat, 23 April 2016, 11:53:22
Here is the current keymapper. :-*
edit: added AppLocale for those who don't want to change system language to Korean.
Any idea which key is the flip key? My scroll lock isn't working.
It's the upper right hand corner key.
Post by: Butter on Sat, 23 April 2016, 11:59:02
Here is the current keymapper. :-*
edit: added AppLocale for those who don't want to change system language to Korean.
Any idea which key is the flip key? My scroll lock isn't working.
It's the upper right hand corner key.
Thanks it work! Now I need to find the driver.
Post by: Pieminister on Sat, 23 April 2016, 12:00:12
Post by: blighty on Sat, 23 April 2016, 12:08:28
Here is the current keymapper. :-*
edit: added AppLocale for those who don't want to change system language to Korean.
Any idea which key is the flip key? My scroll lock isn't working.
It's the upper right hand corner key.
Thanks it work! Now I need to find the driver.
Here are the files I have. Put them all in one post. :thumb:
Post by: tuco on Sat, 23 April 2016, 12:33:46
Here is the current keymapper. :-*
edit: added AppLocale for those who don't want to change system language to Korean.
Any idea which key is the flip key? My scroll lock isn't working.
It's the upper right hand corner key.
Thanks it work! Now I need to find the driver.
Here are the files I have. Put them all in one post. :thumb:
Thanks for the files!
Post by: Jedi on Sat, 23 April 2016, 13:21:52
Does the acrylic flat bottom plate have room for 2 sets of duck feet (total of 4)?
Post by: cirrus82 on Sat, 23 April 2016, 14:31:39
Post by: Pemdas on Sat, 23 April 2016, 15:25:36
Here is the current keymapper. :-*
edit: added AppLocale for those who don't want to change system language to Korean.
Any idea which key is the flip key? My scroll lock isn't working.
It's the upper right hand corner key.
Thanks it work! Now I need to find the driver.
Here are the files I have. Put them all in one post. :thumb:
Thanks for the files! Gonna have to mess with this tonight :thumb:
Post by: Venatorious on Sat, 23 April 2016, 17:33:45
Post by: beltet on Sat, 23 April 2016, 17:43:09
Post by: zoomwalt on Sat, 23 April 2016, 23:21:00
Post by: hkf on Sun, 24 April 2016, 00:05:06
Post by: Jedi on Sun, 24 April 2016, 00:14:44
Post by: GOGOMA on Sun, 24 April 2016, 02:38:14
Korean alphabet "Hangeul"
Lee Sunshin font
(http://i.imgur.com/bN7EmUH.jpg)
(http://i.imgur.com/XVM7iEo.jpg)
(http://i.imgur.com/kjrWgsC.jpg)
Post by: WNovizar on Sun, 24 April 2016, 02:49:07
Post by: biocalves on Sun, 24 April 2016, 02:51:59
Post by: Venatorious on Sun, 24 April 2016, 03:13:20
Post by: boo on Sun, 24 April 2016, 03:21:09
Post by: WNovizar on Sun, 24 April 2016, 03:25:19
Would love the brass weightSeconded. Even the cad design files would be fine for me, since the is local workshop who would laser cut it for me
Post by: duckness on Sun, 24 April 2016, 04:02:40
Post by: beckshl on Sun, 24 April 2016, 07:23:46
Post by: whizzard on Sun, 24 April 2016, 08:34:12
Post by: Butter on Sun, 24 April 2016, 09:40:02
Would love the brass weightSeconded. Even the cad design files would be fine for me, since the is local workshop who would laser cut it for me
If you get them cut can I buy on off you?
Post by: WNovizar on Sun, 24 April 2016, 09:59:14
Would love the brass weightSeconded. Even the cad design files would be fine for me, since the is local workshop who would laser cut it for me
If you get them cut can I buy on off you?
You could, but first I need to find the cad files for it.
Post by: alienman82 on Sun, 24 April 2016, 10:01:35
Post by: duckness on Sun, 24 April 2016, 10:04:20
Post by: WNovizar on Sun, 24 April 2016, 10:11:13
Would love the brass weightSeconded. Even the cad design files would be fine for me, since the is local workshop who would laser cut it for me
If you get them cut can I buy on off you?
You could, but first I need to find the cad files for it.
Looks fairly simple to make a CAD file for. Just a rectangle extruded with some filets :D
I sucks at it tho. Again I am not good at it, so I just want to get the CAD files, and take it to the local workshop. They might be able to countersunk the screws
Post by: alienman82 on Sun, 24 April 2016, 10:12:56
Post by: WNovizar on Sun, 24 April 2016, 10:14:09
Post by: ika on Sun, 24 April 2016, 18:35:36
Would love the brass weightSeconded. Even the cad design files would be fine for me, since the is local workshop who would laser cut it for me
If you get them cut can I buy on off you?
You could, but first I need to find the cad files for it.
Looks fairly simple to make a CAD file for. Just a rectangle extruded with some filets :D
I sucks at it tho. Again I am not good at it, so I just want to get the CAD files, and take it to the local workshop. They might be able to countersunk the screws
Wish I had an octagon, I could do it for you :)
If you pass through Akron on your way from Columbus to Philly, I could let you borrow mine for science.
Post by: WNovizar on Mon, 25 April 2016, 02:57:51
Post by: alienman82 on Mon, 25 April 2016, 09:46:21
Post by: adamski07 on Mon, 25 April 2016, 12:03:33
It looks from the pictures on duck's site where he talks about the feet that it is possible to have two feet one on the left and one on the right and two in the top area of the acrylic flat bottom.
Does the acrylic flat bottom plate have room for 2 sets of duck feet (total of 4)?
No. You would need to drill new holes for the other two duck feet.
Post by: gaiden on Mon, 25 April 2016, 18:04:25
4 duck feet... OK... But why?It looks from the pictures on duck's site where he talks about the feet that it is possible to have two feet one on the left and one on the right and two in the top area of the acrylic flat bottom.
Does the acrylic flat bottom plate have room for 2 sets of duck feet (total of 4)?
No. You would need to drill new holes for the other two duck feet.
Sent from my SM-G925T using Tapatalk
Post by: elton5354 on Mon, 25 April 2016, 18:46:46
How many spots is round 3?
30 orders
When are the invoices for Batch 3 coming?
Maybe mid-May or so. I'll give you guys a week to pay otherwise the spot goes to the next in line.
Does the Octagon still not support opening the switch tops without desoldering?
I'm afraid not.. :blank:
I filled form soon and last time I checked my No. is 74 ... Now I'm 98. What happen with my order?
That can't be possible..#74 was an order from long ago. I haven't switched anyone around...
Also there are a lot more than 30 orders for the 3rd batch..... :eek: :-[ I just haven't added the rest yet because we're already at 99 on the public spreadsheet...
Post by: Jedi on Mon, 25 April 2016, 19:51:31
Post by: elton5354 on Mon, 25 April 2016, 19:58:19
I will update the spreadsheet at most 100, because I'm not taking more than 90 orders.
FYI, the blackbird will be the next keyboard GB. http://duck0113.tistory.com/130
Post by: Gengarfan on Mon, 25 April 2016, 20:07:30
Actually, I want to take payment as soon as possible, so I will start invoicing by this week.
I will update the spreadsheet at most 100, because I'm not taking more than 90 orders.
FYI, the blackbird will be the next keyboard GB. http://duck0113.tistory.com/130
Great news! Does this mean the GB will be done sooner than if invoicing was done in May?
Post by: elton5354 on Mon, 25 April 2016, 20:14:19
Actually, I want to take payment as soon as possible, so I will start invoicing by this week.
I will update the spreadsheet at most 100, because I'm not taking more than 90 orders.
FYI, the blackbird will be the next keyboard GB. http://duck0113.tistory.com/130
Great news! Does this mean the GB will be done sooner than if invoicing was done in May?
Yes, It will quicker than 1st round. 3rd round will also be quicker.
Moving on to the next keyboard soon :D
Post by: Butter on Mon, 25 April 2016, 20:21:13
Actually, I want to take payment as soon as possible, so I will start invoicing by this week.
I will update the spreadsheet at most 100, because I'm not taking more than 90 orders.
FYI, the blackbird will be the next keyboard GB. http://duck0113.tistory.com/130
Any estimate time for Blackbird GB? So I can get the wallet ready.
Post by: tuco on Mon, 25 April 2016, 20:22:39
Post by: aaron6301 on Mon, 25 April 2016, 21:27:05
Guess I have more time to save funds for possibly 2 :D
Sent from my SAMSUNG-SM-G925A using Tapatalk
Post by: elton5354 on Mon, 25 April 2016, 22:17:04
Actually, I want to take payment as soon as possible, so I will start invoicing by this week.
I will update the spreadsheet at most 100, because I'm not taking more than 90 orders.
FYI, the blackbird will be the next keyboard GB. http://duck0113.tistory.com/130
Any estimate time for Blackbird GB? So I can get the wallet ready.
Not sure, maybe in a few months.
Post by: Butter on Mon, 25 April 2016, 22:22:33
Actually, I want to take payment as soon as possible, so I will start invoicing by this week.
I will update the spreadsheet at most 100, because I'm not taking more than 90 orders.
FYI, the blackbird will be the next keyboard GB. http://duck0113.tistory.com/130
Any estimate time for Blackbird GB? So I can get the wallet ready.
Not sure, maybe in a few months.
Cool, Thanks for doing the GB :)
Post by: Delirious on Mon, 25 April 2016, 22:41:50
Post by: blighty on Tue, 26 April 2016, 00:17:25
Have anyone found a successful way to flash the firmware? I held down the top right key and my board won't go into boot mode for flashing whatsoever. I even tried second top right keys, caps lock, esc and no success so far.
I am assuming you held the upper right hand key in while plugging in the board with no results? Is the switch soldered securely/ making contact? Could you have burned a trace around that switch?
Post by: Pemdas on Tue, 26 April 2016, 00:18:18
Have anyone found a successful way to flash the firmware? I held down the top right key and my board won't go into boot mode for flashing whatsoever. I even tried second top right keys, caps lock, esc and no success so far.
The keymapper wasn't flashing for me for some reason, wouldn't write anything or reboot my keyboard out of the boot mode.
I did have success flashing the hex file using the atmel flip software though.
Although if you're having trouble even getting into bootloader mode not really sure what the problem could be.
This is what I do to get my board into the boot mode
1. unplug keyboard
2. hold down top right key
3. plug in keyboard
4. let go of top right key
Post by: breitling on Tue, 26 April 2016, 15:51:08
Post by: joostflux on Tue, 26 April 2016, 16:55:46
Got mine! The blue grey is a lot more silvery than I thought. Looks great though! Love it!
Pics when you get a chance please :)
Post by: E3E on Tue, 26 April 2016, 23:30:47
Got mine! The blue grey is a lot more silvery than I thought. Looks great though! Love it!
If that's the case, then I wonder how silvery silver is. :P
Post by: Venatorious on Tue, 26 April 2016, 23:36:40
Also I can agree with breit, the blue gray is amazing the blue isn't as prominent as you might think.
Post by: gnarlsagan on Tue, 26 April 2016, 23:51:06
Post by: kenshinjeff on Wed, 27 April 2016, 00:08:53
Octagon V2 Brass plate
Korean alphabet "Hangeul"
Lee Sunshin fontShow Image(http://i.imgur.com/bN7EmUH.jpg)Show Image(http://i.imgur.com/XVM7iEo.jpg)Show Image(http://i.imgur.com/kjrWgsC.jpg)
I gues it shouldn't be _too_ difficult to do this with a cnc machine. What type of pain gives the engraving "colouring"? I assume it's something like masking tape over the plate before the cnc machine starts, and when the cnc machine is finished, the paint (?) is sprayed over.
Post by: duckness on Wed, 27 April 2016, 00:14:15
Does anyone know if it's possible to program the command key for a Mac? How about custom commands? The how-to page on duck's site isn't super clear. I can program everything else no problem.command key on OSX is the same as windows key on windows.
Post by: elton5354 on Wed, 27 April 2016, 13:40:54
Let me know...
Post by: Maevy on Wed, 27 April 2016, 13:48:51
Post by: elton5354 on Wed, 27 April 2016, 13:51:02
How many slots for this round 30?
Yeah..so up to 90 orders total
Post by: nguyenkimtam on Wed, 27 April 2016, 13:51:15
Do you guys prefer if I give out individual invoices or do you want to just send me the payment to me directly to my PayPal account? Of course you are paying it as goods/services as the total would have the PayPal fees included.I prefer send invoice :thumb:
Let me know...
Post by: eksuen on Wed, 27 April 2016, 13:55:32
Post by: ultraman982 on Wed, 27 April 2016, 14:32:25
Do you guys prefer if I give out individual invoices or do you want to just send me the payment to me directly to my PayPal account? Of course you are paying it as goods/services as the total would have the PayPal fees included.
Let me know...
Whatever is convenient.
For those not super used to paypal, direct payment shouldn't actually matter from a protection standpoint since we're sending it as Goods and Services.
Post by: qqeyes on Wed, 27 April 2016, 14:46:17
Do you guys prefer if I give out individual invoices or do you want to just send me the payment to me directly to my PayPal account?
Either way is fine, invoicing every person seems like a pain.
Post by: cirrus82 on Wed, 27 April 2016, 16:16:18
Post by: Gengarfan on Wed, 27 April 2016, 16:29:18
Do you guys prefer if I give out individual invoices or do you want to just send me the payment to me directly to my PayPal account? Of course you are paying it as goods/services as the total would have the PayPal fees included.
Let me know...
I would prefer an invoice to me directly. That would be a lot of work though so I understand if you choose to have us do it.
Post by: Jin on Wed, 27 April 2016, 17:02:11
Post by: breitling on Wed, 27 April 2016, 18:36:12
Post by: boo on Wed, 27 April 2016, 19:45:15
How many slots for this round 30?
Yeah..so up to 90 orders total
So what happens to people after 90? Is that a wait list?
Post by: gnarlsagan on Wed, 27 April 2016, 20:16:52
[attachimg=1]
Post by: alienman82 on Wed, 27 April 2016, 20:20:19
Post by: cirrus82 on Wed, 27 April 2016, 20:33:32
Mid build. :cool:
(Attachment Link)
Nice, is that an off white/amber color for the leds? I just ordered some red 1.8mm but I'm still a little bit on the fence...
Post by: gnarlsagan on Wed, 27 April 2016, 20:41:29
Mid build. :cool:
(Attachment Link)
Nice, is that an off white/amber color for the leds? I just ordered some red 1.8mm but I'm still a little bit on the fence...
Yep they're warm white. I picked them up on eBay:
http://www.ebay.com/itm/121730667540?
Post by: kiwi99 on Wed, 27 April 2016, 21:08:11
Mid build. :cool:
(Attachment Link)
Looks sweet, love the warm white leds.
Post by: cirrus82 on Wed, 27 April 2016, 21:32:33
Mid build. :cool:
(Attachment Link)
Looks sweet, love the warm white leds.
Agreed, they look great.
Post by: airs on Wed, 27 April 2016, 22:25:48
Post by: kurtle107 on Thu, 28 April 2016, 08:50:45
Post by: kurtle107 on Thu, 28 April 2016, 20:20:10
Post by: hkf on Thu, 28 April 2016, 21:34:57
I see my order in the spreadsheet but it doesn't say Angled Acrylic for the extra bottom casing. Will it get updated later?
other peoples have been updated so I assume your form was filled out incorrectly, best to PM him to confirm
Post by: duckness on Fri, 29 April 2016, 00:21:59
Any of the other SG ppl in the buy want to get one cut with me?
Post by: Butter on Fri, 29 April 2016, 00:29:48
Contacted duck0113 for the weight insert CAD files. Enjoy.
Any of the other SG ppl in the buy want to get one cut with me?
Nice! Thank you for sharing this. Now any US people want to get them cut?
Post by: hkf on Fri, 29 April 2016, 00:53:12
Contacted duck0113 for the weight insert CAD files. Enjoy.
Any of the other SG ppl in the buy want to get one cut with me?
Thanks duckness :D
Post by: roostrc0gburn on Fri, 29 April 2016, 01:06:46
Contacted duck0113 for the weight insert CAD files. Enjoy.
Any of the other SG ppl in the buy want to get one cut with me?
Nice! Thank you for sharing this. Now any US people want to get them cut?
i would love to get in on a little mini-gb. might have a shop for the plates, depending on material type and finish work
Post by: killerbolt on Fri, 29 April 2016, 02:57:51
Contacted duck0113 for the weight insert CAD files. Enjoy.I think you may be the only guy in SG with an Octagon V2. You're planning to have one cut?
Any of the other SG ppl in the buy want to get one cut with me?
Sent from my Nexus 6P using Tapatalk
Post by: duckness on Fri, 29 April 2016, 03:29:37
I think you may be the only guy in SG with an Octagon V2.yes, so far. Got the 3 of you in round 2 though, right?
You're planning to have one cut?Yes, although I want stainless steel.
Post by: kurtle107 on Fri, 29 April 2016, 03:43:37
i míss this time again, can please let me inHow many slots for this round 30?
Yeah..so up to 90 orders total
Post by: merlin64 on Fri, 29 April 2016, 09:46:17
I'd be willing to have him cut them if someone can give me parameters such as
1. What is it made of?
2. Price point?
3. Finishing?
4. Anything else you can think of
Post by: duckness on Fri, 29 April 2016, 10:04:10
I'd be willing to have him cut them if someone can give me parameters such as1. Usually Brass or Stainless Steel
1. What is it made of?
2. Price point?
3. Finishing?
4. Anything else you can think of
2. unsure
3. I think offering a mirror finish and a brushed finish would be sufficient
4. It should be countersunk and be approximately 3.5mm in height
Post by: redbanshee on Fri, 29 April 2016, 10:07:07
Edit: looked at OP, anwsered my own question.....
Post by: ika on Fri, 29 April 2016, 10:11:58
I'd be willing to have him cut them if someone can give me parameters such as1. Usually Brass or Stainless Steel
1. What is it made of?
2. Price point?
3. Finishing?
4. Anything else you can think of
2. unsure
3. I think offering a mirror finish and a brushed finish would be sufficient
4. It should be countersunk and be approximately 3.5mm in height
Finishing is easy to DIY with just some brasso and a polishing cloth, maybe a little fine grit sandpaper if required. If it drops the price point considerably I would be fine with finishing it myself.
Post by: merlin64 on Fri, 29 April 2016, 10:13:52
Is this even going to be worth a group buy for?
Post by: WNovizar on Fri, 29 April 2016, 10:24:48
I think you may be the only guy in SG with an Octagon V2.yes, so far. Got the 3 of you in round 2 though, right?
You're planning to have one cut?Yes, although I want stainless steel.
Please start IC thread for these inserts, I live in Indonesia, so shipping those from singapore might not be so bad.....
Post by: duckness on Fri, 29 April 2016, 10:34:47
Finishing is easy to DIY with just some brasso and a polishing cloth, maybe a little fine grit sandpaper if required. If it drops the price point considerably I would be fine with finishing it myself.IIRC metals are usually already sold in multiple finishes so it may not affect price too much
Duckness are you thinking of cutting more pieces so that international people (international to Singapore) would be able to buy from you/Group Buy, or should I attempt to run an Interest Check and Group Buy.
Is this even going to be worth a group buy for?
My main concern is shipping, at 500g minimum a piece, it may not be worth shipping anywhere other than locally. I'm probably going to cut mine in Singapore unless your friend has really good rates.
Please start IC thread for these inserts, I live in Indonesia, so shipping those from singapore might not be so bad.....
I'll talk to my contact this weekend and see how it goes first.
Post by: merlin64 on Fri, 29 April 2016, 10:39:22
Post by: -musubi on Fri, 29 April 2016, 12:31:27
Post by: elton5354 on Fri, 29 April 2016, 13:11:53
I'll talk to my people too and figure out rates from there. I'll try and source something locally too (US). We'll carry on the rest of the discussion through PM so as to not hijack this thread.
I'm in!!
I'll start invoicing over the weekend.
Post by: roostrc0gburn on Fri, 29 April 2016, 13:17:05
Contacted duck0113 for the weight insert CAD files. Enjoy.
Any of the other SG ppl in the buy want to get one cut with me?
i dont see dimensions for the thickness of the plate in the file. it's just 2D. anyone have that info?
measuring from the bottom housing could be problematic
Post by: duckness on Fri, 29 April 2016, 13:25:09
Contacted duck0113 for the weight insert CAD files. Enjoy.
Any of the other SG ppl in the buy want to get one cut with me?
i dont see dimensions for the thickness of the plate in the file. it's just 2D. anyone have that info?
measuring from the bottom housing could be problematic
It doesn't really matter how thick it is so long as it doesn't touch the PCB, I feel a good gauge would be the thickness of the acrylic inserts, which are approximately 3.5mm
Post by: guy12 on Fri, 29 April 2016, 15:51:57
Post by: beltet on Fri, 29 April 2016, 16:07:13
I'll talk to my people too and figure out rates from there. I'll try and source something locally too (US). We'll carry on the rest of the discussion through PM so as to not hijack this thread.
I'm in!!
I'll start invoicing over the weekend.
Is it possible to pay on monday? I need to transfer money between accounts.
Post by: hkf on Fri, 29 April 2016, 17:00:33
I'll talk to my people too and figure out rates from there. I'll try and source something locally too (US). We'll carry on the rest of the discussion through PM so as to not hijack this thread.
I'm in!!
I'll start invoicing over the weekend.
Yay! :D
Post by: cirrus82 on Fri, 29 April 2016, 17:26:10
I'll talk to my people too and figure out rates from there. I'll try and source something locally too (US). We'll carry on the rest of the discussion through PM so as to not hijack this thread.
I'd be down for one or or two depending on price. Would prefer it plain without the logotype, if that's possible.
Post by: Butter on Fri, 29 April 2016, 17:36:04
I'll talk to my people too and figure out rates from there. I'll try and source something locally too (US). We'll carry on the rest of the discussion through PM so as to not hijack this thread.
I'll be in for 1 as well.
Post by: gaiden on Fri, 29 April 2016, 18:27:59
Interested if I get the boardI'll talk to my people too and figure out rates from there. I'll try and source something locally too (US). We'll carry on the rest of the discussion through PM so as to not hijack this thread.
I'll be in for 1 as well.
Sent from my SM-G900T using Tapatalk
Post by: jshane on Fri, 29 April 2016, 21:13:54
Post by: elton5354 on Fri, 29 April 2016, 23:49:07
I'll talk to my people too and figure out rates from there. I'll try and source something locally too (US). We'll carry on the rest of the discussion through PM so as to not hijack this thread.
I'm in!!
I'll start invoicing over the weekend.
Is it possible to pay on monday? I need to transfer money between accounts.
I'll give everyone a week to pay otherwise I'll give the spot to the next person in line.
Post by: Jedi on Sat, 30 April 2016, 01:54:08
Post by: duckness on Sat, 30 April 2016, 03:11:40
The list hasn't been updated since round 2 closed. The form is still open but considering this is limited production, does this round3 only involve the people that were leftovers from round2?It has most certainly been updated, got a few people I know that entered when the form was reopened and are currently on the list
Post by: kenlee on Sat, 30 April 2016, 03:23:58
have you got any info when batch 2 ship out
Post by: kurtle107 on Sat, 30 April 2016, 05:49:36
do we still have a chance?I'll talk to my people too and figure out rates from there. I'll try and source something locally too (US). We'll carry on the rest of the discussion through PM so as to not hijack this thread.
I'm in!!
I'll start invoicing over the weekend.
Is it possible to pay on monday? I need to transfer money between accounts.
I'll give everyone a week to pay otherwise I'll give the spot to the next person in line.
Post by: elton5354 on Sat, 30 April 2016, 07:47:13
hi elton5354
have you got any info when batch 2 ship out
They are mostly ready, just needs to be anodized. I'd say 2-3 weeks.
do we still have a chance?I'll talk to my people too and figure out rates from there. I'll try and source something locally too (US). We'll carry on the rest of the discussion through PM so as to not hijack this thread.
I'm in!!
I'll start invoicing over the weekend.
Is it possible to pay on monday? I need to transfer money between accounts.
I'll give everyone a week to pay otherwise I'll give the spot to the next person in line.
You're at spot 112, so maybe not..unfortunately.
The list hasn't been updated since round 2 closed. The form is still open but considering this is limited production, does this round3 only involve the people that were leftovers from round2?
No, there were about half that were leftovers from the 2nd batch and the other half was from the recent opening of the order form.
Post by: Jedi on Sat, 30 April 2016, 07:55:26
Post by: elton5354 on Sat, 30 April 2016, 08:04:11
Thanks Elton5354, I'm sure there are many more than will be fulfilled by this next round. Thank you for opening it up for a third run. Do you know by chance my spot on the form?
No problem. :) You're at 104
Post by: tom.smykowski on Sat, 30 April 2016, 08:36:16
Post by: guy12 on Sat, 30 April 2016, 08:49:23
Post by: boo on Sat, 30 April 2016, 09:40:45
Post by: kurtle107 on Sat, 30 April 2016, 09:41:10
[/quote]
They are mostly ready, just needs to be anodized. I'd say 2-3 weeks.
do we still have a chance?I'll talk to my people too and figure out rates from there. I'll try and source something locally too (US). We'll carry on the rest of the discussion through PM so as to not hijack this thread.
I'm in!!
I'll start invoicing over the weekend.
Is it possible to pay on monday? I need to transfer money between accounts.
I'll give everyone a week to pay otherwise I'll give the spot to the next person in line.
You're at spot 112, so maybe not..unfortunately.
[/quote]
thanks i wont miss that again
Post by: gaiden on Sat, 30 April 2016, 09:45:50
Damn I'm number 91.... Just 1 away. :(I hear you, I'm 93..
Sent from my SM-G900T using Tapatalk
Post by: WNovizar on Sat, 30 April 2016, 10:07:48
Post by: ultraman982 on Sat, 30 April 2016, 16:29:57
Damn I'm number 91.... Just 1 away. :(I hear you, I'm 93..
Sent from my SM-G900T using Tapatalk
I'm 97....I was too slow :(
I imagine most people will pay their invoices real quick, though one can dream.
Post by: hkf on Sat, 30 April 2016, 17:09:35
Post by: -musubi on Sat, 30 April 2016, 17:35:51
Post by: airs on Sat, 30 April 2016, 18:19:06
(https://media1.giphy.com/media/LGa69eFGOfJ6M/200_s.gif)
Post by: Gengarfan on Sat, 30 April 2016, 18:33:46
Post by: RichieRo on Sat, 30 April 2016, 19:29:36
Sent from my iPhone using Tapatalk
Post by: Jin on Sat, 30 April 2016, 19:43:47
Post by: Namkhanhv on Sat, 30 April 2016, 23:17:41
Post by: yuktsi on Sun, 01 May 2016, 10:28:31
Post by: Venatorious on Sun, 01 May 2016, 11:11:33
Does anyone want my spot? (89) :cool:
Post by: elton5354 on Sun, 01 May 2016, 11:18:40
I love my Orion v2 so much I don't think I will need another duck custom... Put my order in before I got my Orion.
Does anyone want my spot? (89) :cool:
Or if you don't want it anymore, I can cancel your order and give it to the next person in line. :p ;D
Actually, I am not accepting any spot taking as I would like the ones that put in their order have a chance (since they did made it in).
Post by: Venatorious on Sun, 01 May 2016, 11:20:02
Post by: Auxo on Sun, 01 May 2016, 11:27:22
Thanks
Post by: elton5354 on Sun, 01 May 2016, 11:30:11
random question, but does anyone know where I can get the green arrow keys in the main picture of the octagon?
Thanks
https://elitekeyboards.com/products.php?sub=access,cherrymxkeys&pid=cds_grn_arrow
Post by: alienman82 on Sun, 01 May 2016, 11:38:45
Post by: boo on Sun, 01 May 2016, 12:50:45
Post by: widdlekitty on Sun, 01 May 2016, 12:58:43
please cancel my order or give it up
Will take :thumb:
Post by: beltet on Sun, 01 May 2016, 12:59:09
I'll talk to my people too and figure out rates from there. I'll try and source something locally too (US). We'll carry on the rest of the discussion through PM so as to not hijack this thread.
I'm in!!
I'll start invoicing over the weekend.
Is it possible to pay on monday? I need to transfer money between accounts.
I'll give everyone a week to pay otherwise I'll give the spot to the next person in line.
Great, Thanks! Will pay tomorrow.
Do you have any estimate on when batch 3 will be shipping. Just wondering if I need to change adress because of my summer vacation.
Post by: Venatorious on Sun, 01 May 2016, 13:01:54
Paid. Thank you
Were you the one that took my place? I hope you enjoy your octagon. :D
Post by: boo on Sun, 01 May 2016, 14:30:55
Paid. Thank you
Were you the one that took my place? I hope you enjoy your octagon. :D
Yeah I think so :D Thank you. It will be my first custom.
Post by: Venatorious on Sun, 01 May 2016, 14:44:14
I actually don't even know what the alu bottom is like, I have both acrylic bottoms because the light is something I bought the board for and the alu bottom doesn't show enough :rolleyes:
Post by: boo on Sun, 01 May 2016, 15:22:25
I am a touch typist so I rarely look towards my keyboard during normal use.
Post by: ika on Sun, 01 May 2016, 15:33:43
RE: alu bottom vs acrylic angled - both have their place. I have angled acrylic on my Orion and alu on my Octagon. I do like how the RGB light spills out from underneath the board on the Orion. On the Octagon, the underglow light is only visible at the edges of the board, and without a triangular insert I don't really see the RGB light when typing from above. Even the acrylic side inserts don't do a whole lot unless looking at the board from the side. Right now I just have it matched to my LED color, since the alu and keys are both black and my switch LEDS are orange-red.
Post by: HannahPeach on Sun, 01 May 2016, 16:13:17
random question, but does anyone know where I can get the green arrow keys in the main picture of the octagon?
Thanks
I got those as well just for the heck of it!
Post by: stillzman on Sun, 01 May 2016, 16:38:45
Post by: billhicks on Sun, 01 May 2016, 17:08:28
Post by: Jin on Sun, 01 May 2016, 17:31:56
i want to joinI love my Orion v2 so much I don't think I will need another duck custom... Put my order in before I got my Orion.
Does anyone want my spot? (89) :cool:
Or if you don't want it anymore, I can cancel your order and give it to the next person in line. :p ;D
Actually, I am not accepting any spot taking as I would like the ones that put in their order have a chance (since they did made it in).
Post by: Auxo on Sun, 01 May 2016, 18:24:12
random question, but does anyone know where I can get the green arrow keys in the main picture of the octagon?
Thanks
https://elitekeyboards.com/products.php?sub=access,cherrymxkeys&pid=cds_grn_arrow
Awesome thank you
Post by: elton5354 on Sun, 01 May 2016, 19:57:14
I'll talk to my people too and figure out rates from there. I'll try and source something locally too (US). We'll carry on the rest of the discussion through PM so as to not hijack this thread.
I'm in!!
I'll start invoicing over the weekend.
Is it possible to pay on monday? I need to transfer money between accounts.
I'll give everyone a week to pay otherwise I'll give the spot to the next person in line.
Great, Thanks! Will pay tomorrow.
Do you have any estimate on when batch 3 will be shipping. Just wondering if I need to change adress because of my summer vacation.
Man I'm such a newb I keep missing out on this!! Any chance for a 4th round?
No 4th round. This will be the last round for this board.
The 3rd batch will ship out a few weeks after 2nd batch is shipped.
Post by: Jedi on Sun, 01 May 2016, 20:54:59
No 4th round. This will be the last round for this board.
If there is even the slightest possibility of increasing the lot size by even 10 more, that would be amazing. This is one cool board that I sure wouldn't want to miss out on. You're organization on these buys is incredible. I know its alot harder than you make it look. Makes it that much harder for me knowing you have such a good grip on how to make this all work. :)
Post by: Venatorious on Sun, 01 May 2016, 21:01:19
You might even be glad they ran out in the future.
Post by: Jedi on Sun, 01 May 2016, 21:10:48
Post by: roostrc0gburn on Sun, 01 May 2016, 21:56:16
Post by: filphil on Sun, 01 May 2016, 21:59:28
having some trouble with the keymapper. can someone direct me to a thread on this? i guess i assume there has been previous discussion
Note - I don't personally own an Octagon v2
https://geekhack.org/index.php?topic=70864.msg2156462#msg2156462
This is how I map my keys since the lightsaver v1. I don't imagine the octagon v2 being any different but you can give this a try. It's a bit of redirecting but hopefully it helps as long as the octagon also uses the atmega32U4 chip.
Post by: roostrc0gburn on Sun, 01 May 2016, 22:06:22
having some trouble with the keymapper. can someone direct me to a thread on this? i guess i assume there has been previous discussion
Note - I don't personally own an Octagon v2
https://geekhack.org/index.php?topic=70864.msg2156462#msg2156462
This is how I map my keys since the lightsaver v1. I don't imagine the octagon v2 being any different but you can give this a try. It's a bit of redirecting but hopefully it helps as long as the octagon also uses the atmega32U4 chip.
thank you! that actually did fix it - i had to rename the .hex.
Post by: ika on Sun, 01 May 2016, 22:14:14
Post by: roostrc0gburn on Sun, 01 May 2016, 22:18:10
The driver I had installed for the Orion v2 worked for the Octagon so I imagine they are very similar in terms of hardware. Instructions should be basically the same except for keymap and the flip key (top right on the Octagon).
yep, the gui is pretty intuitive. the overall process is a little quirky, but the guide blighty uploaded covers the bases. anyone else having that issue with the arrow keys? i would rather not have to use a separate layer as a workaround
blighty's post, for those who missed it:
https://geekhack.org/index.php?topic=78549.msg2149910#msg2149910
Post by: ika on Sun, 01 May 2016, 22:23:28
The driver I had installed for the Orion v2 worked for the Octagon so I imagine they are very similar in terms of hardware. Instructions should be basically the same except for keymap and the flip key (top right on the Octagon).
yep, the gui is pretty intuitive. the overall process is a little quirky, but the guide blighty uploaded covers the bases. anyone else having that issue with the arrow keys? i would rather not have to use a separate layer as a workaround
blighty's post, for those who missed it:
https://geekhack.org/index.php?topic=78549.msg2149910#msg2149910
Is there an issue with your arrow keys? Mine work fine on the default layer.
Post by: Butter on Sun, 01 May 2016, 22:39:04
The driver I had installed for the Orion v2 worked for the Octagon so I imagine they are very similar in terms of hardware. Instructions should be basically the same except for keymap and the flip key (top right on the Octagon).
yep, the gui is pretty intuitive. the overall process is a little quirky, but the guide blighty uploaded covers the bases. anyone else having that issue with the arrow keys? i would rather not have to use a separate layer as a workaround
blighty's post, for those who missed it:
https://geekhack.org/index.php?topic=78549.msg2149910#msg2149910
I read some where that you need to change your system language to Korean. It work for me.
Post by: SaySo on Mon, 02 May 2016, 06:43:01
Post by: elton5354 on Mon, 02 May 2016, 07:21:44
No 4th round. This will be the last round for this board.
If there is even the slightest possibility of increasing the lot size by even 10 more, that would be amazing. This is one cool board that I sure wouldn't want to miss out on. You're organization on these buys is incredible. I know its alot harder than you make it look. Makes it that much harder for me knowing you have such a good grip on how to make this all work. :)
Thanks for your kind words. It was quite flattering and I even blushed a bit. There are quite a bit of work behind the scene, but it is still manageable. :)
Unfortunately, 90 will be the max order for this buy as Duck and TC wants to move on to Blackbird next. Duck really loves the Blackbird :P
Received mine, everything seems there, super well packed :Show Image(http://i.imgur.com/FYrNfWA.jpg?1)
Thank you Elton and Duck :thumb:
It took a while for you to receive yours. Yeah the packaging is amazing and it leaves me with tons of garbage afterwards.. :))
Post by: SaySo on Mon, 02 May 2016, 07:30:27
Post by: ctrlX on Mon, 02 May 2016, 13:01:12
Post by: roostrc0gburn on Mon, 02 May 2016, 13:52:10
Received mine last week. Noticed yesterday when test fitting my stabs that my PCB has a couple of minor "imperfections". I tested closing the circuit on all switch mounting points and all seem to work, including LED holes. Does anyone else have this on the PCB, or is it just mine?
not sure what you are referring to? maybe there is a bit of a "burn mark" around D18? could just be flux from soldering...
otherwise i dont see anything abnormal. a couple of those pads look like they're lifted, but i think it is just a black reflection of your camera or phone?
Post by: HannahPeach on Mon, 02 May 2016, 13:54:33
for all of you guys who went with the red bottom part. This keyboard looks like a sports car to me!
Thanks for the textbook example of a smoothly running GB, elton!
(http://i.imgur.com/uduRacY.jpg)
(http://i.imgur.com/SrWcwSf.jpg)
(http://i.imgur.com/nhDhVjO.jpg)
(http://i.imgur.com/eWDtiL5.jpg)
Post by: alienman82 on Mon, 02 May 2016, 14:10:45
Post by: omgar on Mon, 02 May 2016, 14:16:30
I thought I might share some pictures here in the thread as well
for all of you guys who went with the red bottom part. This keyboard looks like a sports car to me!
Thanks for the textbook example of a smoothly running GB, elton!
Are those Nixdorf blacks? It looks great! Which keyset are you planning to use with it?
Post by: HannahPeach on Mon, 02 May 2016, 14:28:30
Post by: Venatorious on Mon, 02 May 2016, 14:42:02
Nice board btw I never thought of mixing different tops and bottoms
Post by: HannahPeach on Mon, 02 May 2016, 14:49:25
Is the plate bronze anodized? It kind of looks that way.
Nice board btw I never thought of mixing different tops and bottoms
It isn't, there's wood above the keyboard in this photo which makes it look that way.
It's just the usual stainless steel plate. I was pretty anxious about mixing two colors myself,
though I am super super happy with how it turned out.
Post by: ctrlX on Mon, 02 May 2016, 15:05:50
Yes, some residue at D18. Look at D48. Dunno how to describe it, but it looks like it is from drilling the holes for the switch.Received mine last week. Noticed yesterday when test fitting my stabs that my PCB has a couple of minor "imperfections". I tested closing the circuit on all switch mounting points and all seem to work, including LED holes. Does anyone else have this on the PCB, or is it just mine?
not sure what you are referring to? maybe there is a bit of a "burn mark" around D18? could just be flux from soldering...
otherwise i dont see anything abnormal. a couple of those pads look like they're lifted, but i think it is just a black reflection of your camera or phone?
Post by: Dreamre on Mon, 02 May 2016, 15:10:19
Received mine last week. Noticed yesterday when test fitting my stabs that my PCB has a couple of minor "imperfections". I tested closing the circuit on all switch mounting points and all seem to work, including LED holes. Does anyone else have this on the PCB, or is it just mine?
They're like that to support different kind of layouts.
Post by: ctrlX on Mon, 02 May 2016, 15:16:15
Hehe, it sure does. :) There is a small metal sliver from the drilled holes at D48. Spotted two more locations on the PCB where there are slivers. I've tested the board and everything seems fine. Just wanted to check if someone else also had this. Just making sure mine was properly aligned when the holes were drilled in the factory.Received mine last week. Noticed yesterday when test fitting my stabs that my PCB has a couple of minor "imperfections". I tested closing the circuit on all switch mounting points and all seem to work, including LED holes. Does anyone else have this on the PCB, or is it just mine?
They're like that to support different kind of layouts.
Post by: Dreamre on Mon, 02 May 2016, 15:26:59
Hehe, it sure does. :) There is a small metal sliver from the drilled holes at D48. Spotted two more locations on the PCB where there are slivers. I've tested the board and everything seems fine. Just wanted to check if someone else also had this. Just making sure mine was properly aligned when the holes were drilled in the factory.Received mine last week. Noticed yesterday when test fitting my stabs that my PCB has a couple of minor "imperfections". I tested closing the circuit on all switch mounting points and all seem to work, including LED holes. Does anyone else have this on the PCB, or is it just mine?
They're like that to support different kind of layouts.
Oh, I see it now. Let me take at my PCB tonight.
Post by: omgar on Mon, 02 May 2016, 15:58:02
I thought I might share some pictures here in the thread as well
for all of you guys who went with the red bottom part. This keyboard looks like a sports car to me!
Thanks for the textbook example of a smoothly running GB, elton!
Are those Nixdorf blacks? It looks great! Which keyset are you planning to use with it?
Yes indeed they are, I just took another picture for you to have a better look at the switches.
I am not quite sure to be honest with you, usually I'm a sucker for DSA but I don't think it looks as nice with anything
above 65% so I'm probably going to go with something like.. BSP Cyrillic.. or BSP Hebrew. [:
Thank you! Glad to see switches like this being put to good use. I'm actually surprised we haven't seen more pictures from other builds. I'm first up on the second batch and I'm itching to get it.
Post by: ultraman982 on Mon, 02 May 2016, 23:05:13
Post by: Jedi on Mon, 02 May 2016, 23:09:42
Post by: ika on Mon, 02 May 2016, 23:12:25
Hehe, it sure does. :) There is a small metal sliver from the drilled holes at D48. Spotted two more locations on the PCB where there are slivers. I've tested the board and everything seems fine. Just wanted to check if someone else also had this. Just making sure mine was properly aligned when the holes were drilled in the factory.Received mine last week. Noticed yesterday when test fitting my stabs that my PCB has a couple of minor "imperfections". I tested closing the circuit on all switch mounting points and all seem to work, including LED holes. Does anyone else have this on the PCB, or is it just mine?
They're like that to support different kind of layouts.
the metal slivers are just the pin plating lifting away from the areas where there are modular holes for compatibility. Not really a problem, I've seen it on a lot of PCBs from Korea.
Post by: pmh1410 on Mon, 02 May 2016, 23:57:14
I thought I might share some pictures here in the thread as well
for all of you guys who went with the red bottom part. This keyboard looks like a sports car to me!
Thanks for the textbook example of a smoothly running GB, elton!
Are those Nixdorf blacks? It looks great! Which keyset are you planning to use with it?
Yes indeed they are, I just took another picture for you to have a better look at the switches.
I am not quite sure to be honest with you, usually I'm a sucker for DSA but I don't think it looks as nice with anything
above 65% so I'm probably going to go with something like.. BSP Cyrillic.. or BSP Hebrew. [:Show Image(http://i.imgur.com/pPiAEm3.jpg)
Oh Sh*T, Nixdorf Vintage Black. Nice build ;)
Post by: ctrlX on Tue, 03 May 2016, 00:55:07
Cheers! Then I'm not worried anymore.Hehe, it sure does. :) There is a small metal sliver from the drilled holes at D48. Spotted two more locations on the PCB where there are slivers. I've tested the board and everything seems fine. Just wanted to check if someone else also had this. Just making sure mine was properly aligned when the holes were drilled in the factory.Received mine last week. Noticed yesterday when test fitting my stabs that my PCB has a couple of minor "imperfections". I tested closing the circuit on all switch mounting points and all seem to work, including LED holes. Does anyone else have this on the PCB, or is it just mine?
They're like that to support different kind of layouts.
the metal slivers are just the pin plating lifting away from the areas where there are modular holes for compatibility. Not really a problem, I've seen it on a lot of PCBs from Korea.
Now I need to find time to lube the rest of my Zealios and make the difficult decision of going ANSI or stick with ISO.
Post by: Venatorious on Tue, 03 May 2016, 00:58:35
Post by: ctrlX on Tue, 03 May 2016, 01:09:06
Go ANSI, join the master race :thumb:Hehe. Leaning towards that, but easier said than done. Especially for us Swedes with all the extra diacritical letters. Plus I'm not good at touch typing. I find myself having to look at the board from time to time. Especially for Alt Gr + key combinations. I'll probably put in a mix of keys with printed legends for ISO Nordic layout. It will be a bit wee difficult since I really want to put my Retro SA to use
Post by: onmybikedrunk on Tue, 03 May 2016, 03:13:55
Post by: beltet on Wed, 04 May 2016, 01:04:01
Go ANSI, join the master race :thumb:Hehe. Leaning towards that, but easier said than done. Especially for us Swedes with all the extra diacritical letters. Plus I'm not good at touch typing. I find myself having to look at the board from time to time. Especially for Alt Gr + key combinations. I'll probably put in a mix of keys with printed legends for ISO Nordic layout. It will be a bit wee difficult since I really want to put my Retro SA to use
ANSI-HHKB-SE FOR THE WIN!:
(http://i.imgur.com/6YUqTA1.jpg)
Post by: ctrlX on Wed, 04 May 2016, 01:12:17
O_O weird seeing ANSI layout, but with a small ISO left shift. SWANSI?Go ANSI, join the master race :thumb:Hehe. Leaning towards that, but easier said than done. Especially for us Swedes with all the extra diacritical letters. Plus I'm not good at touch typing. I find myself having to look at the board from time to time. Especially for Alt Gr + key combinations. I'll probably put in a mix of keys with printed legends for ISO Nordic layout. It will be a bit wee difficult since I really want to put my Retro SA to use
ANSI-HHKB-SE FOR THE WIN!:Show Image(http://i.imgur.com/6YUqTA1.jpg)
Post by: zoomwalt on Thu, 05 May 2016, 00:51:45
I'll talk to my people too and figure out rates from there. I'll try and source something locally too (US). We'll carry on the rest of the discussion through PM so as to not hijack this thread.
I'm in!!
I'll start invoicing over the weekend.
Is it possible to pay on monday? I need to transfer money between accounts.
I'll give everyone a week to pay otherwise I'll give the spot to the next person in line.
Great, Thanks! Will pay tomorrow.
Do you have any estimate on when batch 3 will be shipping. Just wondering if I need to change adress because of my summer vacation.Man I'm such a newb I keep missing out on this!! Any chance for a 4th round?
No 4th round. This will be the last round for this board.
The 3rd batch will ship out a few weeks after 2nd batch is shipped.
Any chance I will make it in? My name is on the list but I'm 98 on the list right now.
Post by: hkf on Thu, 05 May 2016, 17:28:30
I'll talk to my people too and figure out rates from there. I'll try and source something locally too (US). We'll carry on the rest of the discussion through PM so as to not hijack this thread.
I'm in!!
I'll start invoicing over the weekend.
Is it possible to pay on monday? I need to transfer money between accounts.
I'll give everyone a week to pay otherwise I'll give the spot to the next person in line.
Great, Thanks! Will pay tomorrow.
Do you have any estimate on when batch 3 will be shipping. Just wondering if I need to change adress because of my summer vacation.Man I'm such a newb I keep missing out on this!! Any chance for a 4th round?
No 4th round. This will be the last round for this board.
The 3rd batch will ship out a few weeks after 2nd batch is shipped.
Any chance I will make it in? My name is on the list but I'm 98 on the list right now.
Considering that there are 6 outstanding invoices from what I can see and you're 7th from it I'd say 0% chance
Post by: dubious on Thu, 05 May 2016, 18:56:38
Post by: gaiden on Thu, 05 May 2016, 21:10:46
Post by: beckshl on Sat, 07 May 2016, 09:44:09
Pls check pm'd
Post by: elton5354 on Sat, 07 May 2016, 23:04:08
I'm trying to rush this because they are waiting on the payments to move ahead with production.
Post by: Gengarfan on Sun, 08 May 2016, 00:25:04
Update on the payments: I'm going to cancel all unpaid orders by 9AM this Sunday May 8 and I will invoice the next in line. I'll give 24 hours to receive the payments. Given how much time was already given, it shouldn't take that long right? :)
I'm trying to rush this because they are waiting on the payments to move ahead with production.
Awesome! Do you have an estimate for how long it will be to get the round 3 boards? (You are doing awesome btw)
Post by: E3E on Sun, 08 May 2016, 00:32:46
I do switch tuning, stab clipping, sanding, and lubing, band-aid mods, and soldering and desoldering--pretty much all standard services. I can also do hotswap (hotswappable switches and/or LEDs) PCB modding if anyone's into that.
I definitely wouldn't mind putting together some of these for anyone who wants or needs someone else to handle it for them.
:thumb:
My first Korean custom was the Octagon v1, so it'd be cool to work on a v2 or two. :P
Post by: boo on Sun, 08 May 2016, 01:38:30
Just a small reminder for those that prefer handing off assembly services! I'm always available for handling such things.
I do switch tuning, stab clipping, sanding, and lubing, band-aid mods, and soldering and desoldering--pretty much all standard services. I can also do hotswap (hotswappable switches and/or LEDs) PCB modding if anyone's into that.
I definitely wouldn't mind putting together some of these for anyone who wants or needs someone else to handle it for them.
:thumb:
My first Korean custom was the Octagon v1, so it'd be cool to work on a v2 or two. :P
I might take you up on that. Can we discuss when R3 is getting closer? XD
Post by: E3E on Sun, 08 May 2016, 01:40:54
I might take you up on that. Can we discuss when R3 is getting closer? XD
Hahaha, fine by me! Just send me a PM whenever the occasion calls. :P
Post by: cmd on Sun, 08 May 2016, 07:48:36
Update on the payments: I'm going to cancel all unpaid orders by 9AM this Sunday May 8 and I will invoice the next in line. I'll give 24 hours to receive the payments. Given how much time was already given, it shouldn't take that long right? :)
I'm trying to rush this because they are waiting on the payments to move ahead with production.
Have them get another production run for the Orion :eek: :eek: :eek:
Post by: Jedi on Sun, 08 May 2016, 10:38:52
Any chance I will make it in? My name is on the list but I'm 98 on the list right now.Considering that there are 6 outstanding invoices from what I can see and you're 7th from it I'd say 0% chance
Considering he's in and PAID, I guess that 0% chance went out the window... :p
Post by: ultraman982 on Sun, 08 May 2016, 10:52:30
Update on the payments: I'm going to cancel all unpaid orders by 9AM this Sunday May 8 and I will invoice the next in line. I'll give 24 hours to receive the payments. Given how much time was already given, it shouldn't take that long right? :)
I'm trying to rush this because they are waiting on the payments to move ahead with production.
Invoice paid! Body is ready
Post by: zoomwalt on Sun, 08 May 2016, 10:59:55
Post by: billhicks on Sun, 08 May 2016, 12:38:56
Post by: biocalves on Sun, 08 May 2016, 13:18:56
Paid!
Nooooo~~~
Post by: hkf on Sun, 08 May 2016, 17:49:52
Any chance I will make it in? My name is on the list but I'm 98 on the list right now.Considering that there are 6 outstanding invoices from what I can see and you're 7th from it I'd say 0% chance
Considering he's in and PAID, I guess that 0% chance went out the window... :p
Guess people pulled out? Or I couldn't count, either is likely. :P
Post by: elton5354 on Sun, 08 May 2016, 18:46:31
Oh BTW. No CHANGES anymore please.
Post by: Venatorious on Sun, 08 May 2016, 19:11:37
Post by: Jin on Sun, 08 May 2016, 19:45:12
I just cancelled the 6 unpaid orders, that's all :)i wanna join
Oh BTW. No CHANGES anymore please.
Post by: boo on Sun, 08 May 2016, 21:58:29
I might take you up on that. Can we discuss when R3 is getting closer? XD
Hahaha, fine by me! Just send me a PM whenever the occasion calls. :P
Great! Thanks!
Post by: kurtle107 on Mon, 09 May 2016, 09:32:54
I just cancelled the 6 unpaid orders, that's all :)so its mean until number 96 right?
Oh BTW. No CHANGES anymore please.
Post by: ika on Mon, 09 May 2016, 16:37:16
I just cancelled the 6 unpaid orders, that's all :)i wanna join
Oh BTW. No CHANGES anymore please.
You can't, please stop asking.
Post by: Gengarfan on Mon, 09 May 2016, 17:24:57
I just cancelled the 6 unpaid orders, that's all :)i wanna join
Oh BTW. No CHANGES anymore please.
You can't, please stop asking.
Thank you for finally saying what we were all thinking...
Post by: hkf on Mon, 09 May 2016, 17:25:42
I just cancelled the 6 unpaid orders, that's all :)i wanna join
Oh BTW. No CHANGES anymore please.
You can't, please stop asking.
Thank you for finally saying what we were all thinking...
Now if only someone will say that to the person that PM'd everyone in R3 for their spot.
Post by: Venatorious on Mon, 09 May 2016, 17:39:48
Post by: Gengarfan on Mon, 09 May 2016, 17:50:34
I just cancelled the 6 unpaid orders, that's all :)i wanna join
Oh BTW. No CHANGES anymore please.
You can't, please stop asking.
Thank you for finally saying what we were all thinking...
Now if only someone will say that to the person that PM'd everyone in R3 for their spot.
These darn vultures lol did we ever get an estimate for around when R3 people will be getting their boards by the way?
Post by: merlin64 on Mon, 09 May 2016, 18:20:26
https://geekhack.org/index.php?topic=81978.0
Post by: Jin on Mon, 09 May 2016, 18:23:15
IC for the metal plate insert =).Nice... i want this.... brass plate
https://geekhack.org/index.php?topic=81978.0
Post by: Venatorious on Mon, 09 May 2016, 18:25:16
Post by: merlin64 on Mon, 09 May 2016, 18:39:50
Post by: Chewypost on Mon, 09 May 2016, 18:53:24
Post by: Jin on Mon, 09 May 2016, 18:59:52
But Jin you need the keyboard first!i got from my friend !
Post by: HannahPeach on Mon, 09 May 2016, 19:29:10
Elton, if we chose the flat acrylic, will the chrome feet still be included?
yes
Post by: Chewypost on Mon, 09 May 2016, 21:35:57
Perfect thanks for the answer!Elton, if we chose the flat acrylic, will the chrome feet still be included?
yes
I looked at the order sheet and it just said flat acrylic so I wasn't sure
Post by: duckness on Mon, 09 May 2016, 22:46:46
(http://i.imgur.com/F8a7VNG.jpg)
Post by: alienman82 on Mon, 09 May 2016, 23:09:27
Post by: roostrc0gburn on Mon, 09 May 2016, 23:59:16
Post by: duckness on Tue, 10 May 2016, 00:07:36
what thickness?3mm
Post by: WNovizar on Tue, 10 May 2016, 01:11:48
what thickness?3mm
Please open your own GB duckness, I will buy it. You are nearer to me than merlin!!
Post by: nguyenkimtam on Tue, 10 May 2016, 14:20:50
Love it :thumb:
(http://i.imgur.com/mNdJzWv.jpg)
Post by: biocalves on Tue, 10 May 2016, 14:24:40
Love it :thumb:Show Image(http://i.imgur.com/mNdJzWv.jpg)
Man that looks hawt. Too bad I missed this buy by 2 spots, buty at least I'm not cswanic!
Post by: aaron6301 on Tue, 10 May 2016, 14:30:27
Love it :thumb:Show Image(http://i.imgur.com/mNdJzWv.jpg)
Dang, those inserts :eek:
Post by: alienman82 on Tue, 10 May 2016, 14:44:21
Post by: omgar on Tue, 10 May 2016, 14:57:10
Love it :thumb:Show Image(http://i.imgur.com/mNdJzWv.jpg)
Very nice!
Post by: zoomwalt on Tue, 10 May 2016, 15:08:16
Post by: gaiden on Tue, 10 May 2016, 15:10:19
Wait, so it goes INSIDE the case? As in you can't see it from the outside?These are meant to be weights, truthfully it's what's INSIDE that counts
Sent from my SM-G900T using Tapatalk
Post by: nguyenkimtam on Tue, 10 May 2016, 15:19:53
Wait, so it goes INSIDE the case? As in you can't see it from the outside?There's no chance for outside :p
Post by: WNovizar on Tue, 10 May 2016, 19:18:06
Love it :thumb:Show Image(http://i.imgur.com/mNdJzWv.jpg)
Uhh? My octagon does not have acrylic diffuser that big o.O
Post by: Venatorious on Tue, 10 May 2016, 21:55:43
Love it :thumb:Show Image(http://i.imgur.com/mNdJzWv.jpg)
I really like the silver one with the engravings.
Post by: billhicks on Wed, 11 May 2016, 08:30:33
Post by: merlin64 on Wed, 11 May 2016, 09:19:28
Post by: aaron6301 on Wed, 11 May 2016, 10:39:42
Any status updates regarding Round 2?
I reached out to Elton on May 5th and he replied with the following: "Last told was about 2-3 weeks. They have the cases prepared and made already, just need to anodize them".
Post by: elton5354 on Wed, 11 May 2016, 13:41:06
Any status updates regarding Round 2?
I reached out to Elton on May 5th and he replied with the following: "Last told was about 2-3 weeks. They have the cases prepared and made already, just need to anodize them".
yup
Post by: brighenne on Thu, 12 May 2016, 19:01:19
Post by: hkf on Thu, 12 May 2016, 19:09:44
I seem to recall reading that there would be another group buy for octagons, am I remembering correctly?
Duck is going to do other projects
Post by: Chewypost on Fri, 13 May 2016, 09:41:57
I seem to recall reading that there would be another group buy for octagons, am I remembering correctly?
You probably thought about the third batch of round 2.
Post by: brighenne on Fri, 13 May 2016, 10:13:09
I seem to recall reading that there would be another group buy for octagons, am I remembering correctly?
You probably thought about the third batch of round 2.
I think you're correct. I'll continue my search.
Post by: breitling on Fri, 13 May 2016, 12:59:41
Post by: AceRuckus on Fri, 13 May 2016, 16:25:20
Post by: gaiden on Fri, 13 May 2016, 16:38:31
Will this GB ever come back? :'(I'm guessing when v3 comes around but v2 is gone as far as I know.
Sent from my SM-G900T using Tapatalk
Post by: mrboovn on Fri, 13 May 2016, 19:53:36
Post by: Venatorious on Fri, 13 May 2016, 20:37:57
I have a Blue-greyOctagon v2 Full Aluminum kit.Anyone have a Red-Silver(top or bottom case doesn't matter)want to trade to Blue-grey please let me know.Thanks :D
I have acrylic. Would you be interested in trading + cash for one of your bottom cases?
Post by: mrboovn on Fri, 13 May 2016, 20:39:06
No thanks :D I only want to trade it to another alu bottom.I have a Blue-greyOctagon v2 Full Aluminum kit.Anyone have a Red-Silver(top or bottom case doesn't matter)want to trade to Blue-grey please let me know.Thanks :D
I have acrylic. Would you be interested in trading + cash for one of your bottom cases?
Post by: Venatorious on Fri, 13 May 2016, 20:53:37
Post by: AceRuckus on Sat, 14 May 2016, 02:50:15
Any news on v3 ever being made? Lol I want this kb so badWill this GB ever come back? :'(I'm guessing when v3 comes around but v2 is gone as far as I know.
Sent from my SM-G900T using Tapatalk
Post by: joostflux on Sat, 14 May 2016, 10:49:15
Any news on v3 ever being made? Lol I want this kb so badWill this GB ever come back? :'(I'm guessing when v3 comes around but v2 is gone as far as I know.
Sent from my SM-G900T using Tapatalk
Duck does all kinds of different keyboards and his next one up is the Blackbird. You can check out his website http://duck0113.tistory.com/ (http://duck0113.tistory.com/) and you can see the timeline between some of his boards but my guess is it will be at least a year before for V.3, if V.3 ever comes.
Post by: AceRuckus on Sat, 14 May 2016, 11:17:59
Any news on v3 ever being made? Lol I want this kb so badWill this GB ever come back? :'(I'm guessing when v3 comes around but v2 is gone as far as I know.
Sent from my SM-G900T using Tapatalk
Duck does all kinds of different keyboards and his next one up is the Blackbird. You can check out his website http://duck0113.tistory.com/ (http://duck0113.tistory.com/) and you can see the timeline between some of his boards but my guess is it will be at least a year before for V.3, if V.3 ever comes.
Thanks! That's exactly what I was trying to look for on these forums!
Post by: ctrlX on Sat, 14 May 2016, 11:54:19
Post by: Venatorious on Sat, 14 May 2016, 15:16:25
Post by: ctrlX on Sat, 14 May 2016, 15:36:18
That would be the LED for numlock. Just plug in any keyboard with a numpad to turn it off/on.Ahaaa. Yes but of course. (Feeling stupid now). Haven't used a full size keyboard with numpad for a long time.
Post by: breitling on Mon, 16 May 2016, 17:32:52
Post by: AceRuckus on Mon, 16 May 2016, 17:35:12
Finally done mine!Beautiful. Lmk if you gonna sell it lol
Post by: ctrlX on Mon, 16 May 2016, 18:03:40
After I've soldered about 5 switches I ran them through the key tester to see if I had any chattering. I repeated this process throughout the whole board until I had all the switches soldered. Luckily no chattering was discovered. I was very careful with not applying too much heat on all the pads and actually lowered the temp of my soldering station to 300 degrees C before I started. During the soldering session, the same problem occurred about 3 times. Every time when I re-connected the USB cable, my PC was not able to identify the device, error message; "Unknown USB Device (Device Descriptor Request Failed)".
After frantically disconnecting and connecting the USB cable, the board did get recognized eventually. Sometimes it took 5 minutes and sometimes more. Every time it got recognized I sighed out of relief. Now all the switches are soldered and I started programming my layers. After flashing the board a couple of times and testing my layers the same thing happened again! My PC refuses to recognize the board and I've even tested from another computer but to no avail.
Any help and suggestions would be greatly appreciated. Could I have received a defected PCB?
Edit:
The issue seem to have mysteriously disappeared. Last time it happened I flashed it using Atmel Flip instead of O2D KeyMapper. It has been solid ever since. Been using the board everyday at work for a couple of days now. Hopefully I'm not jinxing it by writing this post and it stays functional.
Post by: Jin on Mon, 16 May 2016, 18:21:24
Finally done mine!very nice :thumb:
Post by: omgar on Tue, 17 May 2016, 12:54:37
That would be the LED for numlock. Just plug in any keyboard with a numpad to turn it off/on.Ahaaa. Yes but of course. (Feeling stupid now). Haven't used a full size keyboard with numpad for a long time.
You can also turn off numlock from the on-screen keyboard in Windows 7/10
(http://i.stack.imgur.com/gUuZk.png)
Post by: duckness on Tue, 17 May 2016, 13:02:45
Post by: ctrlX on Tue, 17 May 2016, 13:39:33
That would be the LED for numlock. Just plug in any keyboard with a numpad to turn it off/on.Ahaaa. Yes but of course. (Feeling stupid now). Haven't used a full size keyboard with numpad for a long time.
You can also turn off numlock from the on-screen keyboard in Windows 7/10Show Image(http://i.stack.imgur.com/gUuZk.png)
Cheers. I've already figured it out :-)
Here are some pictures of mine....
[attach=1]
[attach=2]
Using lubed 65g Zealios with my Retro SA set. At the moment I'm going all brown. Really wish I had gotten the PETSCII set as well, but didn't have the funds when the GB was running. :-( I'll experiment with different key color combination of the Retro SA set in the future. For now I like going all brown.
My first ANSI build and I have installed SE keys to get used to the layout (not good at touch typing).
I also have to apologize for the bad quality of the images. I used my phone and couldn't be bothered picking up my DSLR.
Really liking the layout and I am utilizing layers to control LEDs and Fn key for compensating for losing some keys to the layout and going from ISO SE to ANSI.
Unfortunately it is not all peaches. I have re-occurring problem with the Octagon that I've described here: https://geekhack.org/index.php?topic=78549.msg2172587#msg2172587
Edit:
The issue seem to have mysteriously disappeared. Last time it happened I flashed it using Atmel Flip instead of O2D KeyMapper. It has been solid ever since. Been using the board everyday at work for a couple of days now. Hopefully I'm not jinxing it by writing this post and it stays functional.
Post by: E3E on Tue, 17 May 2016, 14:06:53
Post by: ctrlX on Wed, 18 May 2016, 01:08:32
Great looking board, CtrlX. I hope you get your issues with the PCB resolved!Thank you very much!
Love what you did with your Orion V2 by the way. Have you hot-swap modded Cherry type PCBs also?
Post by: E3E on Fri, 20 May 2016, 15:21:02
Great looking board, CtrlX. I hope you get your issues with the PCB resolved!Thank you very much!
Love what you did with your Orion V2 by the way. Have you hot-swap modded Cherry type PCBs also?
Thank you just the same! I'm happy people like it since it's pretty much one of the last customs I've had chalked up. Dyeing the key caps was a tricky ordeal!
I have not tried hotswapping Cherry PCBs, but I can tell you that doing so with the sockets needed for Cherry MX would be substantially easier than with Alps switches (due to the larger pins that Alps uses). You would not need to use a drill at all to bore out the switch positions like you would with Alps.
I'd really love to build a hotswappable Cherry build because of its relative simplicity to execute compared to Alps, but I'm just not really invested in Cherry MX that much these days.
Post by: Butter on Fri, 20 May 2016, 22:18:32
(http://i.imgur.com/AGK3AFW.jpg)
Post by: Chewypost on Fri, 20 May 2016, 22:42:41
Post by: adamski07 on Tue, 24 May 2016, 21:17:33
Post by: cirrus82 on Wed, 25 May 2016, 12:07:08
Post by: Gengarfan on Wed, 25 May 2016, 13:51:06
Post by: Dreamre on Wed, 25 May 2016, 16:40:38
Can we get an update on how things are going by any chance? I PM'd Elton with no reply about this awhile ago.
I believe they're anodizing the keyboards right now.
Post by: cirrus82 on Wed, 25 May 2016, 17:11:29
That would be the LED for numlock. Just plug in any keyboard with a numpad to turn it off/on.Ahaaa. Yes but of course. (Feeling stupid now). Haven't used a full size keyboard with numpad for a long time.
You can also turn off numlock from the on-screen keyboard in Windows 7/10Show Image(http://i.stack.imgur.com/gUuZk.png)
Cheers. I've already figured it out :-)
Here are some pictures of mine....
(Attachment Link)
(Attachment Link)
Using lubed 65g Zealios with my Retro SA set. At the moment I'm going all brown. Really wish I had gotten the PETSCII set as well, but didn't have the funds when the GB was running. :-( I'll experiment with different key color combination of the Retro SA set in the future. For now I like going all brown.
My first ANSI build and I have installed SE keys to get used to the layout (not good at touch typing).
I also have to apologize for the bad quality of the images. I used my phone and couldn't be bothered picking up my DSLR.
Really liking the layout and I am utilizing layers to control LEDs and Fn key for compensating for losing some keys to the layout and going from ISO SE to ANSI.
Unfortunately it is not all peaches. I have re-occurring problem with the Octagon that I've described here: https://geekhack.org/index.php?topic=78549.msg2172587#msg2172587
Edit:
The issue seem to have mysteriously disappeared. Last time it happened I flashed it using Atmel Flip instead of O2D KeyMapper. It has been solid ever since. Been using the board everyday at work for a couple of days now. Hopefully I'm not jinxing it by writing this post and it stays functional.
Looks great in SA, glad to see the row profile works out. Think I'm doing something similar...
Post by: Gengarfan on Wed, 25 May 2016, 18:14:41
Can we get an update on how things are going by any chance? I PM'd Elton with no reply about this awhile ago.
I believe they're anodizing the keyboards right now.
Alright awesome. Is that for round 2 or round 3?
Post by: Dreamre on Wed, 25 May 2016, 18:27:12
Can we get an update on how things are going by any chance? I PM'd Elton with no reply about this awhile ago.
I believe they're anodizing the keyboards right now.
Alright awesome. Is that for round 2 or round 3?
That's for R2, no news for R3 yet! :thumb:
Post by: roostrc0gburn on Wed, 25 May 2016, 22:47:41
(picture from duck's site)
(http://cfile3.uf.tistory.com/image/2358804356A8B624088F93)
I am guessing the 3 on the left are NumLock, ScrollLock, CapsLock (idk what order) and the other 4 are layers??
Post by: Butter on Wed, 25 May 2016, 23:06:16
finally finished making zealios and getting into this build. can someone give an explanation for the 7 indicator LEDs?
(picture from duck's site)Show Image(http://cfile3.uf.tistory.com/image/2358804356A8B624088F93)
I am guessing the 3 on the left are NumLock, ScrollLock, CapsLock (idk what order) and the other 4 are layers??
Yup, you got them right.
Post by: ctrlX on Thu, 26 May 2016, 00:56:13
finally finished making zealios and getting into this build. can someone give an explanation for the 7 indicator LEDs?Correct. Note that when layer 4 is active, none of the layer LEDs are active. 4th LED in the layer LED cluster is used when LED control is activated.
(picture from duck's site)Show Image(http://cfile3.uf.tistory.com/image/2358804356A8B624088F93)
I am guessing the 3 on the left are NumLock, ScrollLock, CapsLock (idk what order) and the other 4 are layers??
Post a pic of the board when you finished building it.
Very few has posted imo.
Post by: roostrc0gburn on Thu, 26 May 2016, 01:54:25
Post by: ctrlX on Thu, 26 May 2016, 01:58:32
So, why is there a NumLock LED? There is no number cluster.anybody using this for something else?Good question. The Orion also has a NumLock LED without having a number cluster.
Post by: ika on Fri, 27 May 2016, 13:42:28
Post by: beckshl on Sat, 28 May 2016, 21:43:34
Post by: joostflux on Sun, 29 May 2016, 09:47:24
Does anyone have info about batch 2 and 3? Cant wait anymore :(
If you look up a few posts the last thing we knew was happening was they were getting ano'd. As far as time goes this GB is flying in comparison to the last Duck GB which was Orion V.2 and if my memory serves that took nearly a year. So I know it sucks to be patient but trust me we are all in the same boat. I've been waiting for this GB to come back since I missed out on round 1 by just a few months. Patience is key in the mech keyboard game. We need to be thankful that there is a round 2 and 3 in the first place :thumb:
Post by: billhicks on Mon, 30 May 2016, 10:15:20
Post by: omgar on Mon, 30 May 2016, 10:47:46
How long did the first and second buys take from paypal->U.S. doorsteps? What is the ETA for the 3rd/final round in the U.S.?Invoices started going out February 1st. First round was at people's doorsteps ~April 20th.
Post by: roostrc0gburn on Mon, 30 May 2016, 22:40:48
ok, final assembly complete. 78g lubed and individually socketed zealios. haven't installed indicating LEDs or switch LEDs yet, but i could use some help with RGB controls. I have been playing around with the LED controls in 02D Mapper, but i cant figure it out. also found this on duck's website, but i am unable to decipher.
http://duck0113.tistory.com/category/%E2%98%85Firmware%20Program (http://duck0113.tistory.com/category/%E2%98%85Firmware%20Program)
can someone please explain or point me to a thread that tells me how to turn down the intensity and change colors/RGB effects on the fly?
Post by: boo on Tue, 31 May 2016, 09:51:15
Post by: aaron6301 on Tue, 31 May 2016, 10:30:34
Hey guys, as I prepare for r3, what kind of stabilizers does the octagon support? Pcb or plate mounted?
First page and first post :rolleyes:... "(Requires Cherry PCB stabilizers)"
Post by: merlin64 on Tue, 31 May 2016, 10:37:35
Shameless Plug: Meanwhile if you're all looking for some extra weight, I'm running an IC for the metal insert.
Post by: boo on Tue, 31 May 2016, 18:35:59
Hey guys, as I prepare for r3, what kind of stabilizers does the octagon support? Pcb or plate mounted?
First page and first post :rolleyes:... "(Requires Cherry PCB stabilizers)"
Haha you are right. My bad! Thanks for pointing out!
Sent from my iPhone using Tapatalk
Post by: nothing4me on Thu, 02 June 2016, 01:03:44
I just found out about this keyboard... :(
Post by: Chewypost on Thu, 02 June 2016, 11:33:25
Post by: joostflux on Thu, 02 June 2016, 17:05:23
Maybe a year later. It's still finishing up
No guarantee and if it does it will probably be a V.3, so there will most likely be changes.
Post by: Chewypost on Thu, 02 June 2016, 21:55:15
Yea I should of mentioned that. Best bet would be to go through the classifieds and r/mechmarketMaybe a year later. It's still finishing up
No guarantee and if it does it will probably be a V.3, so there will most likely be changes.
Post by: beltet on Sun, 05 June 2016, 18:25:23
Post by: tuba section on Sun, 05 June 2016, 20:31:16
I've tried to contact elton about a adress change on my order in batch 3. But have not yet got a reply. Any know if elton have been seen lately?
I talked to Elton recently. Round 2 hasn't shipped yet, I am confident he will respond to you well before r3, don't worry!
Post by: beltet on Mon, 06 June 2016, 00:39:01
I've tried to contact elton about a adress change on my order in batch 3. But have not yet got a reply. Any know if elton have been seen lately?
I talked to Elton recently. Round 2 hasn't shipped yet, I am confident he will respond to you well before r3, don't worry!
Aaaah ok. thanks. Maybe then I dont need an adress change. Can't pick it up in june.
Post by: mrboovn on Mon, 06 June 2016, 20:26:59
(http://i.imgur.com/pUNjsE2.jpg)
Post by: kenshinjeff on Tue, 07 June 2016, 00:18:14
Post by: merlin64 on Wed, 08 June 2016, 08:36:14
Meanwhile if you want one, come check out my GB now live!
Post by: KetchyKech on Wed, 08 June 2016, 08:51:33
Just got on mail :thumb:Show Image(http://i.imgur.com/pUNjsE2.jpg)
makes me wish i got the alu bottom...if only i knew
enjoy!! it looks great
edit: if anyone has a spare alu bottom that they bought and don't want anymore, hit me up!! will gladly buy it off ya :thumb:
Post by: elton5354 on Wed, 08 June 2016, 08:54:19
Anyway I've updated the tracking for the 2nd batch. 😉
Post by: aaron6301 on Wed, 08 June 2016, 10:39:01
Hey guys. Sorry for the absence. There weren't anything to update so I usually shy away at these times.
Anyway I've updated the tracking for the 2nd batch. 😉
Thanks for the update!
Post by: redbanshee on Wed, 08 June 2016, 10:39:44
Anyway I've updated the tracking for the 2nd batch. 😉
HYPE
Post by: mbrown559 on Wed, 08 June 2016, 23:09:55
Post by: omgar on Wed, 08 June 2016, 23:13:11
Hey guys. Sorry for the absence. There weren't anything to update so I usually shy away at these times.
Anyway I've updated the tracking for the 2nd batch. 😉
Thank you for the good news Elton! :cool:
Post by: pmh1410 on Wed, 08 June 2016, 23:39:15
Hey guys. Sorry for the absence. There weren't anything to update so I usually shy away at these times.
Anyway I've updated the tracking for the 2nd batch. 😉
Thanks Elton for new update ;)
Post by: kenshinjeff on Thu, 09 June 2016, 03:17:32
Naturally, I stopped everything to open it :))
What can I say, the packing is super, the quality colour and weight of the case is simply SUPERB. Seriously guys. Really great product.
http://imgur.com/WPeqWCL
Post by: nothing4me on Thu, 09 June 2016, 14:55:19
Post by: tuco on Thu, 09 June 2016, 15:10:09
Words can't describe how awesome this is, thanks!
Post by: tom.smykowski on Thu, 09 June 2016, 19:27:59
Post by: airs on Thu, 09 June 2016, 21:24:19
Post by: hkf on Thu, 09 June 2016, 21:57:08
Can we expect r3 sometime around the middle of August?
Judging by r1 timeline, they were invoiced at Feb 1, orders started being dispatched Mid-April
r3 was invoiced Mid-April, so I would say expect dispatch around early August assuming the timeline is the same :)
Post by: Gengarfan on Thu, 09 June 2016, 22:24:52
Can we expect r3 sometime around the middle of August?
Judging by r1 timeline, they were invoiced at Feb 1, orders started being dispatched Mid-April
r3 was invoiced Mid-April, so I would say expect dispatch around early August assuming the timeline is the same :)
I will be on vacation at that time and can't put it together then :eek: :eek: :eek:
Post by: aaron6301 on Fri, 10 June 2016, 11:09:20
Thanks for the GB Elton!
Post by: nothing4me on Fri, 10 June 2016, 11:25:24
I'll buy it from you. ;)Can we expect r3 sometime around the middle of August?
Judging by r1 timeline, they were invoiced at Feb 1, orders started being dispatched Mid-April
r3 was invoiced Mid-April, so I would say expect dispatch around early August assuming the timeline is the same :)
I will be on vacation at that time and can't put it together then :eek: :eek: :eek:
Post by: Gengarfan on Fri, 10 June 2016, 12:50:21
I'll buy it from you. ;)Can we expect r3 sometime around the middle of August?
Judging by r1 timeline, they were invoiced at Feb 1, orders started being dispatched Mid-April
r3 was invoiced Mid-April, so I would say expect dispatch around early August assuming the timeline is the same :)
I will be on vacation at that time and can't put it together then :eek: :eek: :eek:
You wish :p I will have someone house-sitting who will take it inside at least
Post by: aaron6301 on Sun, 12 June 2016, 16:46:59
When plugging in the keyboard, the last/layer 4 indicator turns on for about 5 seconds and then turns off. When I cycle through the layers, indicators for layers 1-3 stay lit but 4 doesn't for some odd reason.
Any help would be greatly appreciated.
Thanks.
Post by: omgar on Sun, 12 June 2016, 23:27:38
Does anyone know how to turn on the layer 4 indicator on when switching to that particular layer?
When plugging in the keyboard, the last/layer 4 indicator turns on for about 5 seconds and then turns off. When I cycle through the layers, indicators for layers 1-3 stay lit but 4 doesn't for some odd reason.
Any help would be greatly appreciated.
Thanks.
I believe the 4th LED should only light up when you're in LED Ctrl mode. Does it light up when you're in that mode?
Post by: roostrc0gburn on Mon, 13 June 2016, 01:01:06
Does anyone know how to turn on the layer 4 indicator on when switching to that particular layer?
When plugging in the keyboard, the last/layer 4 indicator turns on for about 5 seconds and then turns off. When I cycle through the layers, indicators for layers 1-3 stay lit but 4 doesn't for some odd reason.
Any help would be greatly appreciated.
Thanks.
I believe the 4th LED should only light up when you're in LED Ctrl mode. Does it light up when you're in that mode?
how do you get to LED Ctrl mode? is there a tutorial in english or something?
Post by: aaron6301 on Mon, 13 June 2016, 01:12:25
I didn't map that key but will give it a shot tomorrow.Does anyone know how to turn on the layer 4 indicator on when switching to that particular layer?
When plugging in the keyboard, the last/layer 4 indicator turns on for about 5 seconds and then turns off. When I cycle through the layers, indicators for layers 1-3 stay lit but 4 doesn't for some odd reason.
Any help would be greatly appreciated.
Thanks.
I believe the 4th LED should only light up when you're in LED Ctrl mode. Does it light up when you're in that mode?
FWIW, when I press FN and cycle LED modes, the 4th LED flashes.
Post by: bananaplum on Mon, 13 June 2016, 04:04:54
Post by: merlin64 on Mon, 13 June 2016, 09:59:06
Post by: omgar on Mon, 13 June 2016, 10:02:30
Dangit, I set it to deliver to my office, but my office was closed on Saturday. Do you know if Korean Post or whoever they partner with here in the US attempt redelivery?
EMS utilizes USPS when in the United States. They should attempt delivery today. If you enter your tracking number on the USPS website (https://tools.usps.com/go/TrackConfirmAction?qtc_tLabels1=EG173498712KR) it should show you all the information.
Post by: omgar on Mon, 13 June 2016, 10:20:21
Does anyone know how to turn on the layer 4 indicator on when switching to that particular layer?
When plugging in the keyboard, the last/layer 4 indicator turns on for about 5 seconds and then turns off. When I cycle through the layers, indicators for layers 1-3 stay lit but 4 doesn't for some odd reason.
Any help would be greatly appreciated.
Thanks.
I believe the 4th LED should only light up when you're in LED Ctrl mode. Does it light up when you're in that mode?
how do you get to LED Ctrl mode? is there a tutorial in english or something?
FWIW, when I press FN and cycle LED modes, the 4th LED flashes.
It depends what you mapped LED Ctrl to. By default it is mapped to Esc on Layer 4.
(http://i.imgur.com/2dGOhiO.png)
Post by: aaron6301 on Mon, 13 June 2016, 11:42:27
Does anyone know how to turn on the layer 4 indicator on when switching to that particular layer?
When plugging in the keyboard, the last/layer 4 indicator turns on for about 5 seconds and then turns off. When I cycle through the layers, indicators for layers 1-3 stay lit but 4 doesn't for some odd reason.
Any help would be greatly appreciated.
Thanks.
I believe the 4th LED should only light up when you're in LED Ctrl mode. Does it light up when you're in that mode?
how do you get to LED Ctrl mode? is there a tutorial in english or something?
FWIW, when I press FN and cycle LED modes, the 4th LED flashes.
It depends what you mapped LED Ctrl to. By default it is mapped to Esc on Layer 4.Show Image(http://i.imgur.com/2dGOhiO.png)
Great, thanks for the heads up. I also just realized that I was utilizing the wrong preset map, Octagon V1 :confused:
Post by: hcwt on Mon, 13 June 2016, 23:04:29
Post by: 64rky on Tue, 14 June 2016, 09:13:59
Post by: Saiph on Tue, 14 June 2016, 09:49:14
Post by: beltet on Tue, 14 June 2016, 09:53:19
Anyway I'm happy! ;D
But now I must source the last parts(clear housing tops). Anyone know where to buy the gateron tops?
Post by: aaron6301 on Tue, 14 June 2016, 10:48:24
Got mine today! I thought i was in batch 3, but must have moved up to batch two.
Anyway I'm happy! ;D
But now I must source the last parts(clear housing tops). Anyone know where to buy the gateron tops?
https://zealpc.net/collections/accessories/products/gateron
Post by: aaron6301 on Tue, 14 June 2016, 10:49:20
Looking to sell my kit, my order is on the spreadsheet. Pm me if conus and interested, thanks
If by any chance you're will to part with your angled acrylic base, I'd be happy to purchase it off you.
Post by: biocalves on Tue, 14 June 2016, 12:18:38
Post by: aaron6301 on Tue, 14 June 2016, 13:05:51
If anyone wants to sell their spot for a Blue Grey, Acrylic or Aluminum bottom, please let me know~
65rky is selling his kit, Blue Grey w/alum bottom. Post is a few above yours.
Post by: biocalves on Tue, 14 June 2016, 13:08:36
If anyone wants to sell their spot for a Blue Grey, Acrylic or Aluminum bottom, please let me know~
65rky is selling his kit, Blue Grey w/alum bottom. Post is a few above yours.
I messaged anyone who posted on here that showed interest in selling their board but I was bit late as everything is pending or sold, hence my post looking to buy in any case someone else was thinking about it. Thanks for looking out though! :thumb:
Post by: 64rky on Tue, 14 June 2016, 14:06:21
Looking to sell my kit, my order is on the spreadsheet. Pm me if conus and interested, thanks
Sold
Post by: AceRuckus on Tue, 14 June 2016, 14:23:36
Post by: adamski07 on Wed, 15 June 2016, 00:04:35
Post by: aaron6301 on Wed, 15 June 2016, 00:24:49
Where can I download the latest keymapper for the Octagon V2 and any tutorials for assigning keys? Can't find on Duck's website. TIAPost #803 by Blighty, grouped all in one post.
Sent from my SAMSUNG-SM-G925A using Tapatalk
Post by: gaiden on Wed, 15 June 2016, 08:11:31
Got mine in! Thanks a ton, Elton!
It's not assembled, however. I'll likely be putting in the 65g Zealios I have in it, but, if anyone is looking to purchase one of these, shoot me a PM and we can talk. I probably want to assemble it for the hell of it, and probably give it a bit of a test, but I doubt it'll see much use. Acrylic bottom, as the order sheet says.
It's a very nice keyboard and very expensive so i'm trying hard to understand why you would "doubt it'll see much use"? was buyer's remorse when you open it or were you just curious to see it in person and then flip it back out? To me it's a high ticket item and very well designed and im going to put good use to it, but you made it sound as if you just bought a switch tester lol I dont rather i should laugh or cry. :-\
Post by: adamski07 on Wed, 15 June 2016, 16:44:33
Where can I download the latest keymapper for the Octagon V2 and any tutorials for assigning keys? Can't find on Duck's website. TIAPost #803 by Blighty, grouped all in one post.
Sent from my SAMSUNG-SM-G925A using Tapatalk
Thanks. I was able to flash my layout. I'm having a problem tho. Any idea why my "Shift row" is acting up. When I press "Shift" or "Z" it would type all the alphas on the said row. Other keys aren't registering. Tried checking the solder and everything looks fine. Anyone could help me please? :-X
Post by: hkf on Wed, 15 June 2016, 17:33:00
Where can I download the latest keymapper for the Octagon V2 and any tutorials for assigning keys? Can't find on Duck's website. TIAPost #803 by Blighty, grouped all in one post.
Sent from my SAMSUNG-SM-G925A using Tapatalk
Thanks. I was able to flash my layout. I'm having a problem tho. Any idea why my "Shift row" is acting up. When I press "Shift" or "Z" it would type all the alphas on the said row. Other keys aren't registering. Tried checking the solder and everything looks fine. Anyone could help me please? :-X
Clean your traces with IPA, and reflow your shift and Z joints
Post by: adamski07 on Wed, 15 June 2016, 18:16:18
Where can I download the latest keymapper for the Octagon V2 and any tutorials for assigning keys? Can't find on Duck's website. TIAPost #803 by Blighty, grouped all in one post.
Sent from my SAMSUNG-SM-G925A using Tapatalk
Thanks. I was able to flash my layout. I'm having a problem tho. Any idea why my "Shift row" is acting up. When I press "Shift" or "Z" it would type all the alphas on the said row. Other keys aren't registering. Tried checking the solder and everything looks fine. Anyone could help me please? :-X
Clean your traces with IPA, and reflow your shift and Z joints
I'll try that later. Actually it is not just "Shift and "z". All the keys on that rows is acting up. once pressed, all the letters follows. i.e. when I press "z" it will type "zxcvbnZ>?Cmxv,zNCBxmv,nvn" I'm starting to believe that I have a bad pcb.
Post by: hkf on Wed, 15 June 2016, 18:17:44
Where can I download the latest keymapper for the Octagon V2 and any tutorials for assigning keys? Can't find on Duck's website. TIAPost #803 by Blighty, grouped all in one post.
Sent from my SAMSUNG-SM-G925A using Tapatalk
Thanks. I was able to flash my layout. I'm having a problem tho. Any idea why my "Shift row" is acting up. When I press "Shift" or "Z" it would type all the alphas on the said row. Other keys aren't registering. Tried checking the solder and everything looks fine. Anyone could help me please? :-X
Clean your traces with IPA, and reflow your shift and Z joints
I'll try that later. Actually it is not just "Shift and "z". All the keys on that rows is acting up. once pressed, all the letters follows. i.e. when I press "z" it will type "zxcvbnZ>?Cmxv,zNCBxmv,nvn" I'm starting to believe that I have a bad pcb.
Multimeter test the traces on the switches, I highly doubt that your PCB is bad from one row of shorting on switches.
Post by: -musubi on Wed, 15 June 2016, 18:30:09
Post by: ctrlX on Thu, 16 June 2016, 01:11:02
I also thought I had a bad PCB. All of a sudden it stopped working and LEDs turned of. Unplugging/plugging it back in did not help. Sometimes it took me 30 minutes to get it working again, some times only 5 minutes. All was however resolved by flashing the firmware with FLIp software instead of O2D. My suggestion is to try that. Resolved all my issues and haven't had any since.Where can I download the latest keymapper for the Octagon V2 and any tutorials for assigning keys? Can't find on Duck's website. TIAPost #803 by Blighty, grouped all in one post.
Sent from my SAMSUNG-SM-G925A using Tapatalk
Thanks. I was able to flash my layout. I'm having a problem tho. Any idea why my "Shift row" is acting up. When I press "Shift" or "Z" it would type all the alphas on the said row. Other keys aren't registering. Tried checking the solder and everything looks fine. Anyone could help me please? :-X
Clean your traces with IPA, and reflow your shift and Z joints
I'll try that later. Actually it is not just "Shift and "z". All the keys on that rows is acting up. once pressed, all the letters follows. i.e. when I press "z" it will type "zxcvbnZ>?Cmxv,zNCBxmv,nvn" I'm starting to believe that I have a bad pcb.
Post by: adamski07 on Thu, 16 June 2016, 19:59:48
I also thought I had a bad PCB. All of a sudden it stopped working and LEDs turned of. Unplugging/plugging it back in did not help. Sometimes it took me 30 minutes to get it working again, some times only 5 minutes. All was however resolved by flashing the firmware with FLIp software instead of O2D. My suggestion is to try that. Resolved all my issues and haven't had any since.Where can I download the latest keymapper for the Octagon V2 and any tutorials for assigning keys? Can't find on Duck's website. TIAPost #803 by Blighty, grouped all in one post.
Sent from my SAMSUNG-SM-G925A using Tapatalk
Thanks. I was able to flash my layout. I'm having a problem tho. Any idea why my "Shift row" is acting up. When I press "Shift" or "Z" it would type all the alphas on the said row. Other keys aren't registering. Tried checking the solder and everything looks fine. Anyone could help me please? :-X
Clean your traces with IPA, and reflow your shift and Z joints
I'll try that later. Actually it is not just "Shift and "z". All the keys on that rows is acting up. once pressed, all the letters follows. i.e. when I press "z" it will type "zxcvbnZ>?Cmxv,zNCBxmv,nvn" I'm starting to believe that I have a bad pcb.
Where can I download the Flip keymapper? Could you please link me to the one you used. Thanks
Post by: ctrlX on Fri, 17 June 2016, 03:57:42
I also thought I had a bad PCB. All of a sudden it stopped working and LEDs turned of. Unplugging/plugging it back in did not help. Sometimes it took me 30 minutes to get it working again, some times only 5 minutes. All was however resolved by flashing the firmware with FLIp software instead of O2D. My suggestion is to try that. Resolved all my issues and haven't had any since.Where can I download the latest keymapper for the Octagon V2 and any tutorials for assigning keys? Can't find on Duck's website. TIAPost #803 by Blighty, grouped all in one post.
Sent from my SAMSUNG-SM-G925A using Tapatalk
Thanks. I was able to flash my layout. I'm having a problem tho. Any idea why my "Shift row" is acting up. When I press "Shift" or "Z" it would type all the alphas on the said row. Other keys aren't registering. Tried checking the solder and everything looks fine. Anyone could help me please? :-X
Clean your traces with IPA, and reflow your shift and Z joints
I'll try that later. Actually it is not just "Shift and "z". All the keys on that rows is acting up. once pressed, all the letters follows. i.e. when I press "z" it will type "zxcvbnZ>?Cmxv,zNCBxmv,nvn" I'm starting to believe that I have a bad pcb.
Where can I download the Flip keymapper? Could you please link me to the one you used. Thanks
Flip programmer can be downloaded from Atmel's website. If I remember correctly you have to register to download. I've shared the installation file below so you do not have to. :)
Create your key map using O2D and save the .hex-file. Use Flip programmer to flash the keyboard with your saved .hex file.
URL: https://drive.google.com/file/d/0BzEaXm348GjsLUxxVGJ1aDVqT00/view?usp=sharing
Post by: WNovizar on Sat, 18 June 2016, 01:37:18
Post by: m1raz on Mon, 20 June 2016, 00:24:58
Hi all, can someone tell me the exact length and height of the front side of Octagon V2? I want make wrist rest that must match the length and height of Octagon V2, but I lack the proper tools to measure them myself. Thanks in advance
The length is 316mm and height is about 20mm with alu bottom.
Post by: WNovizar on Mon, 20 June 2016, 00:50:37
Post by: KetchyKech on Mon, 20 June 2016, 13:13:19
OctagonV2 Blue-grey / Angled Acrylic Bottom
Stainless Steel Plate
Lubed 65g Linear Zealios (clear)
Sip-sockted White LED / Warm-White LED on stabs
EnjoyPBT Dyesub Keyset ~ KR Cyan & Pink
CMY Mod Pack ~
more pics:
More
(http://i.imgur.com/jwx9akS.jpg)
(http://i.imgur.com/8v8PfZ3.jpg)
(http://i.imgur.com/8v8PfZ3.jpg)
first korean custom mech! absolutely love it :-*
Post by: cirrus82 on Mon, 20 June 2016, 16:26:14
Really happy I got the rows to match with SA, was about to develop OCD over it.
More pics: http://imgur.com/a/wf8ZW
Post by: merlin64 on Mon, 20 June 2016, 16:28:29
Trying to make a switchable top plate for this, hopefully that works out. Reason I'm doing it is because I'm very conflicted as to what switches I should use.
Post by: Gengarfan on Mon, 20 June 2016, 16:50:58
Man, I don't think I'll be building mine for awhile.
Trying to make a switchable top plate for this, hopefully that works out. Reason I'm doing it is because I'm very conflicted as to what switches I should use.
How long do you think it would take to develop that? I'm very interested
Post by: merlin64 on Mon, 20 June 2016, 17:44:11
Post by: cirrus82 on Mon, 20 June 2016, 20:56:35
I've flashed my board with O2D, and I'm pretty pleased with the results. Got macros working, LED settings, custom layers...
The odd thing is that pressing Left Control and then Tab will auto-release Left Control even though I'm still holding it down. This is common on OSX for switching tabs (I actually think it's the same on Windows, or similar, if not). You keep Left Control pressed and keep pressing Tab to cycle through tabs (likewise Shift+Control+Tab). However I can't do that as it autoreleases Left Control inserting just tabs after the first one. It's bizarre as it works fine with the Right Control. The odd thing is that it seems like it's just that combination (Left Ctrl + Tab), using Left Ctrl + A or Left Ctrl + E repeatedly by holding down control (for home and end) works fine.
Can anyone else try and see if they can cycle tabs with Left Ctrl + Tab?
One other odd thing, I mapped Volume Up, Volume Down and Mute. They have some odd logic going on as if I press them in rapid succession, it registers as if I'd been holding them down. It almost seems like those actions have a really long debounce or something. Odd as it's just those keys.
Post by: cirrus82 on Mon, 20 June 2016, 20:59:13
On the firmware issues, I've got an odd one too.
I've flashed my board with O2D, and I'm pretty pleased with the results. Got macros working, LED settings, custom layers...
The odd thing is that pressing Left Control and then Tab will auto-release Left Control even though I'm still holding it down. This is common on OSX for switching tabs (I actually think it's the same on Windows, or similar, if not). You keep Left Control pressed and keep pressing Tab to cycle through tabs (likewise Shift+Control+Tab). However I can't do that as it autoreleases Left Control inserting just tabs after the first one. It's bizarre as it works fine with the Right Control. The odd thing is that it seems like it's just that combination (Left Ctrl + Tab), using Left Ctrl + A or Left Ctrl + E repeatedly by holding down control (for home and end) works fine.
Can anyone else try and see if they can cycle tabs with Left Ctrl + Tab?
One other odd thing, I mapped Volume Up, Volume Down and Mute. They have some odd logic going on as if I press them in rapid succession, it registers as if I'd been holding them down. It almost seems like those actions have a really long debounce or something. Odd as it's just those keys.
Super weird, after a bit Left Ctrl + Tab fixed itself.
Post by: duckness on Mon, 20 June 2016, 21:45:55
On the firmware issues, I've got an odd one too.
I've flashed my board with O2D, and I'm pretty pleased with the results. Got macros working, LED settings, custom layers...
The odd thing is that pressing Left Control and then Tab will auto-release Left Control even though I'm still holding it down. This is common on OSX for switching tabs (I actually think it's the same on Windows, or similar, if not). You keep Left Control pressed and keep pressing Tab to cycle through tabs (likewise Shift+Control+Tab). However I can't do that as it autoreleases Left Control inserting just tabs after the first one. It's bizarre as it works fine with the Right Control. The odd thing is that it seems like it's just that combination (Left Ctrl + Tab), using Left Ctrl + A or Left Ctrl + E repeatedly by holding down control (for home and end) works fine.
Can anyone else try and see if they can cycle tabs with Left Ctrl + Tab?
One other odd thing, I mapped Volume Up, Volume Down and Mute. They have some odd logic going on as if I press them in rapid succession, it registers as if I'd been holding them down. It almost seems like those actions have a really long debounce or something. Odd as it's just those keys.
Super weird, after a bit Left Ctrl + Tab fixed itself.
could be a sign of soldering issues?
Post by: tom.smykowski on Tue, 21 June 2016, 11:44:31
Post by: cirrus82 on Tue, 21 June 2016, 12:00:38
On the firmware issues, I've got an odd one too.
I've flashed my board with O2D, and I'm pretty pleased with the results. Got macros working, LED settings, custom layers...
The odd thing is that pressing Left Control and then Tab will auto-release Left Control even though I'm still holding it down. This is common on OSX for switching tabs (I actually think it's the same on Windows, or similar, if not). You keep Left Control pressed and keep pressing Tab to cycle through tabs (likewise Shift+Control+Tab). However I can't do that as it autoreleases Left Control inserting just tabs after the first one. It's bizarre as it works fine with the Right Control. The odd thing is that it seems like it's just that combination (Left Ctrl + Tab), using Left Ctrl + A or Left Ctrl + E repeatedly by holding down control (for home and end) works fine.
Can anyone else try and see if they can cycle tabs with Left Ctrl + Tab?
One other odd thing, I mapped Volume Up, Volume Down and Mute. They have some odd logic going on as if I press them in rapid succession, it registers as if I'd been holding them down. It almost seems like those actions have a really long debounce or something. Odd as it's just those keys.
Super weird, after a bit Left Ctrl + Tab fixed itself.
could be a sign of soldering issues?
It could be, but it went really smoothly and cleanly. I might try to flash it with that Flip software someone mentioned on here. Is O2D and the firmware open source?
Post by: megaforce on Thu, 23 June 2016, 00:49:14
Post by: ika on Thu, 23 June 2016, 11:56:16
Love the board but does anyone else feel that the aluminum bottom and top together makes the board super heavy? I shift my keyboard around when I'm adjusting my seat. On another note - I love the acrylic bottom - the videos and pictures really don't do justice to how the lights blend togetherThe weight is the point ;) the feet are just super high friction, if you want it to be easier to move, replace those first.
Post by: aaron6301 on Thu, 23 June 2016, 12:10:24
Hmm whats the "MFN" key used for?
I was under the nothing that it meant "Master Function"... I could be wrong though.
Post by: KetchyKech on Thu, 23 June 2016, 12:17:00
Hmm whats the "MFN" key used for?
cycle through multiple layers w/ consecutive buttons presses of a single key :thumb: (note you gotta hold it when you reach your desired layer)
the light indicators will reflect which layer you are currently on after every given press of the key.
Post by: megaforce on Thu, 23 June 2016, 12:43:20
Hmm whats the "MFN" key used for?
cycle through multiple layers w/ consecutive buttons presses of a single key :thumb: (note you gotta hold it when you reach your desired layer)
the light indicators will reflect which layer you are currently on after every given press of the key.
Hmm whats the "MFN" key used for?
I was under the nothing that it meant "Master Function"... I could be wrong though.
Thanks for the help! I finished building mine earlier this week, still trying to figure out how to program it..AHHHHHHHH :-[
Post by: aaron6301 on Thu, 23 June 2016, 13:11:50
Omgar, a fellow GH was very helpful in helping me program/map my board.Hmm whats the "MFN" key used for?
cycle through multiple layers w/ consecutive buttons presses of a single key :thumb: (note you gotta hold it when you reach your desired layer)
the light indicators will reflect which layer you are currently on after every given press of the key.Hmm whats the "MFN" key used for?
I was under the nothing that it meant "Master Function"... I could be wrong though.
Thanks for the help! I finished building mine earlier this week, still trying to figure out how to program it..AHHHHHHHH :-[
If you need some basic assistance shoot me a PM and hopefully I can provide some help.
Sent from my SAMSUNG-SM-G925A using Tapatalk
Post by: megaforce on Thu, 23 June 2016, 13:22:05
I'll have to take you up on that, thank you!Omgar, a fellow GH was very helpful in helping me program/map my board.Hmm whats the "MFN" key used for?
cycle through multiple layers w/ consecutive buttons presses of a single key :thumb: (note you gotta hold it when you reach your desired layer)
the light indicators will reflect which layer you are currently on after every given press of the key.Hmm whats the "MFN" key used for?
I was under the nothing that it meant "Master Function"... I could be wrong though.
Thanks for the help! I finished building mine earlier this week, still trying to figure out how to program it..AHHHHHHHH :-[
If you need some basic assistance shoot me a PM and hopefully I can provide some help.
Sent from my SAMSUNG-SM-G925A using Tapatalk
Sent from my Nexus 6P using Tapatalk
Post by: omgar on Thu, 23 June 2016, 15:07:15
Omgar, a fellow GH was very helpful in helping me program/map my board.Hmm whats the "MFN" key used for?
cycle through multiple layers w/ consecutive buttons presses of a single key :thumb: (note you gotta hold it when you reach your desired layer)
the light indicators will reflect which layer you are currently on after every given press of the key.Hmm whats the "MFN" key used for?
I was under the nothing that it meant "Master Function"... I could be wrong though.
Thanks for the help! I finished building mine earlier this week, still trying to figure out how to program it..AHHHHHHHH :-[
If you need some basic assistance shoot me a PM and hopefully I can provide some help.
Sent from my SAMSUNG-SM-G925A using Tapatalk
Yup! If anyone needs help I'm available too. :)
Post by: hkf on Thu, 23 June 2016, 21:31:31
Post by: Gengarfan on Thu, 23 June 2016, 21:49:24
Are there any round 3 updates? If the round 1 and 2 timeframe between payment to shipment is on track, we could be getting these bad boys end of next month?
Please don't get me excited for this at the end of next month... I don't want to be heartbroken when it comes the beginning of August while I'm on vacation lol (I know we don't actually know when it's coming yet)
Side note: I was also going to ask for an update so I'm glad you did
Post by: T0mb3ry on Mon, 27 June 2016, 15:57:39
The plate has almost the same dimensions as the original plate. But almost.
(http://i.imgur.com/CwluUCH.jpg)
There is an error of like ~0.1mm+/- which is cumulative (see the plate grommets).
(http://i.imgur.com/wzDbit9.jpg)
However after some slight milling by myself it does still fit well without problems.
(http://i.imgur.com/8INGM2s.jpg)
Keep in mind merlin64 will probably run a GB for such plate.
Post by: ctrlX on Mon, 27 June 2016, 16:07:06
Keep in mind merlin64 will probably run a GB for such plate.
Makes me regret that I've already assembled mine...
Good job on the plate!
Post by: limitz on Mon, 27 June 2016, 16:08:52
Post by: aaron6301 on Mon, 27 June 2016, 17:02:40
Keep in mind merlin64 will probably run a GB for such plate.
Makes me regret that I've already assembled mine...
Good job on the plate!
Same here :( . That was some of my best/cleanest soldering work to date.
If the GB mentioned happens to support a winkeyless layout, I might have to desolder and put her back together again.
Post by: merlin64 on Mon, 27 June 2016, 19:11:09
Tomb3ry can you elaborate on what you had to manually shave down, just eyeballing it from my 15 inch laptop screen, it's hard to notice any differences between that and the original.
Post by: aaron6301 on Mon, 27 June 2016, 19:18:13
Yaaaay! Does the pcb support a winkeyless layout?
Yessir, my bottom row is 1.5 x 1.5 x 7 x 1.5 x 1.5 x 1 x 1 x 1
Sent from my SAMSUNG-SM-G925A using Tapatalk
Post by: T0mb3ry on Tue, 28 June 2016, 01:26:35
Yaaaay! Does the pcb support a winkeyless layout?Unfortunately not, because i am winkey user (alignin windows with "win + arrows" is priceless). However it can be easily transformed into winkeyles or what ever you want layout. The most important thing here is to get proper outer shape.
Tomb3ry can you elaborate on what you had to manually shave down, just eyeballing it from my 15 inch laptop screen, it's hard to notice any differences between that and the original.
The following picture displays with arrows the sites i have shaved down. I shaved down maybe less than 0.5mm. Those screw grommits need to be moved more to the center.
(http://i.imgur.com/FMuqG0u.jpg)
The plate fits barelly and if you are not careful enough the plate might scratch the top case.
(http://i.imgur.com/1wb5H6y.jpg)
However after fixing it with screws, it sits very well and tight like a guitar string. The plate has no flex (loosines). Overall its extremely stiff compared to aluminum plate.
(http://i.imgur.com/aRKVzsN.jpg)
The plate sits very centric and has on every site ~1mm slot.
(http://i.imgur.com/d8SaGgZ.jpg)
Keep in mind that plate is cnc milled. It was not cut with water or something else.
Overall i am very happy with that plate. It fullfills all my needs. However for a real GB, the svg i got, needs a little bit workout. I dont think people will buy a product which they have to mill/shave down afterwards.
Post by: blighty on Tue, 28 June 2016, 04:01:18
Yaaaay! Does the pcb support a winkeyless layout?
Tomb3ry can you elaborate on what you had to manually shave down, just eyeballing it from my 15 inch laptop screen, it's hard to notice any differences between that and the original.
The pcb supports WKL, just not his custom plate. I am not a fan of his chosen layout(prefer stepped caps lock and 1.5 mods left of space) but it is nice to look at. Nice job!
Post by: AceRuckus on Thu, 30 June 2016, 12:49:33
Post by: onmybikedrunk on Mon, 04 July 2016, 04:28:54
Post by: boo on Mon, 04 July 2016, 15:39:59
Please let this GB happen. Otherwise, can we order one from you? HeheYaaaay! Does the pcb support a winkeyless layout?Unfortunately not, because i am winkey user (alignin windows with "win + arrows" is priceless). However it can be easily transformed into winkeyles or what ever you want layout. The most important thing here is to get proper outer shape.Tomb3ry can you elaborate on what you had to manually shave down, just eyeballing it from my 15 inch laptop screen, it's hard to notice any differences between that and the original.
The following picture displays with arrows the sites i have shaved down. I shaved down maybe less than 0.5mm. Those screw grommits need to be moved more to the center.Show Image(http://i.imgur.com/FMuqG0u.jpg)
The plate fits barelly and if you are not careful enough the plate might scratch the top case.Show Image(http://i.imgur.com/1wb5H6y.jpg)
However after fixing it with screws, it sits very well and tight like a guitar string. The plate has no flex (loosines). Overall its extremely stiff compared to aluminum plate.Show Image(http://i.imgur.com/aRKVzsN.jpg)
The plate sits very centric and has on every site ~1mm slot.Show Image(http://i.imgur.com/d8SaGgZ.jpg)
Keep in mind that plate is cnc milled. It was not cut with water or something else.
Overall i am very happy with that plate. It fullfills all my needs. However for a real GB, the svg i got, needs a little bit workout. I dont think people will buy a product which they have to mill/shave down afterwards.
Sent from my iPhone using Tapatalk
Post by: Proyoyo on Mon, 04 July 2016, 19:03:22
Post by: elton5354 on Mon, 04 July 2016, 19:05:35
Any address changes that were made to me by PM has been changed.
You'll all get them by next week probably. :)
Post by: airs on Mon, 04 July 2016, 21:42:56
3rd batch will be shipped this week.
Any address changes that were made to me by PM has been changed.
You'll all get them by next week probably. :)
OMG, that was fast! Thank you Elton!
Post by: kenshinjeff on Mon, 04 July 2016, 22:40:55
3rd batch will be shipped this week.
Any address changes that were made to me by PM has been changed.
You'll all get them by next week probably. :)
Oh? Is the black bird coming soon? ;D
Post by: hkf on Mon, 04 July 2016, 23:55:00
Post by: kawasaki161 on Tue, 05 July 2016, 00:04:30
3rd batch will be shipped this week.
Any address changes that were made to me by PM has been changed.
You'll all get them by next week probably. :)
Oh? Is the black bird coming soon? ;D
Please not, my Wallet is not yet ready for that one.
Post by: -musubi on Tue, 05 July 2016, 00:11:42
Post by: gaiden on Tue, 05 July 2016, 00:52:30
Sent from my SM-G925T using Tapatalk
Post by: Namkhanhv on Tue, 05 July 2016, 01:29:25
Post by: beckshl on Tue, 05 July 2016, 04:18:45
Post by: raymogi on Tue, 05 July 2016, 05:20:04
I already downloaded the o2d keymapper and dfu programmer.
Post by: gaiden on Tue, 05 July 2016, 06:34:41
Sent from my SM-G900T using Tapatalk
Post by: omgar on Tue, 05 July 2016, 08:31:58
How to connect in DFU mode?
I already downloaded the o2d keymapper and dfu programmer.
Hold the top-right key when plugging it in.
Post by: mbrown559 on Tue, 05 July 2016, 15:07:54
Post by: beltet on Sat, 09 July 2016, 01:41:37
Post by: kenlee on Sat, 09 July 2016, 02:46:23
Post by: ctrlX on Sat, 09 July 2016, 04:10:34
Anyone know how to fix the arrowkey bug? I have now assembled my board but I only get questionmarks instead of arrows in O2D. So they dont register when I'm trying to edit the layout.You can either:
change system locale to Korea
or
launch the O2D via AppLocale (http://www.microsoft.com/en-us/download/details.aspx?id=13209)
Post by: beltet on Sat, 09 July 2016, 06:10:28
Anyone know how to fix the arrowkey bug? I have now assembled my board but I only get questionmarks instead of arrows in O2D. So they dont register when I'm trying to edit the layout.You can either:
change system locale to Korea
or
launch the O2D via AppLocale (http://www.microsoft.com/en-us/download/details.aspx?id=13209)
Thanks!
I tried both, and did unfurtunate not work... Believe it's because of windows 10. Very strange that the locale setting in windows 10 did not work at all. Anyway I managed to get it working with this:
https://github.com/xupefei/Locale-Emulator
And one more thing. Can anyone explain a little about the macros how those work? Espacially whats the difference between s and d macros.
Post by: ctrlX on Sat, 09 July 2016, 06:24:54
Ah cool you got it working. I'm still on win 8.1. too lazy to upgrade. Unfortunately I'm not able to help regarding the macros. I too have no idea what the difference is.Anyone know how to fix the arrowkey bug? I have now assembled my board but I only get questionmarks instead of arrows in O2D. So they dont register when I'm trying to edit the layout.You can either:
change system locale to Korea
or
launch the O2D via AppLocale (http://www.microsoft.com/en-us/download/details.aspx?id=13209)
Thanks!
I tried both, and did unfurtunate not work... Believe it's because of windows 10. Very strange that the locale setting in windows 10 did not work at all. Anyway I managed to get it working with this:
https://github.com/xupefei/Locale-Emulator
And one more thing. Can anyone explain a little about the macros how those work? Espacially whats the difference between s and d macros.
Post by: roostrc0gburn on Sun, 10 July 2016, 00:42:45
Post by: ctrlX on Sun, 10 July 2016, 02:22:40
that link from microsoft dneHmm, you're right. I've got the msi locally, but on vacation atm. So I am not able to upload it as an attachment. But it does not seem to work on win10 anyway. You could try the other utility beltet mentioned instead.
Post by: hkf on Sun, 10 July 2016, 17:39:56
3rd batch will be shipped this week.
Any address changes that were made to me by PM has been changed.
You'll all get them by next week probably. :)
Week has come and gone, any chance for tracking updates Elton? Thanks!
Post by: gaiden on Mon, 11 July 2016, 10:54:40
Post by: omgar on Mon, 11 July 2016, 10:55:42
can anyone tell me which usb connection the Octagon v2 uses Micro or Mini? thanks
Mini-USB
Post by: gaiden on Mon, 11 July 2016, 11:04:14
Thanks!can anyone tell me which usb connection the Octagon v2 uses Micro or Mini? thanks
Mini-USB
Sent from my SM-G900T using Tapatalk
Post by: beltet on Tue, 12 July 2016, 05:13:30
Duck Octagon V2 https://imgur.com/a/R4p3k
Thanks for this GB!
Post by: aaron6301 on Tue, 12 July 2016, 12:15:16
My build is now finished:
Duck Octagon V2 https://imgur.com/a/R4p3k
Thanks for this GB!
Looks like you have that slight color discoloration line as well :( Kinda bummed about it tbh. Does anyone know if there is any possible way to remove that line without re-anodizing?
Post by: ctrlX on Tue, 12 July 2016, 14:05:03
Where is the line located you speak of? I'm on a crappy connection at the moment and not able to look at high res images.My build is now finished:
Duck Octagon V2 https://imgur.com/a/R4p3k
Thanks for this GB!
Looks like you have that slight color discoloration line as well :( Kinda bummed about it tbh. Does anyone know if there is any possible way to remove that line without re-anodizing?
Post by: aaron6301 on Tue, 12 July 2016, 14:24:00
EDIT: I've only seen the faint line on the Silver/Gray boards.
Post by: rephlex00 on Tue, 12 July 2016, 21:17:28
Post by: beltet on Wed, 13 July 2016, 16:04:36
My build is now finished:
Duck Octagon V2 https://imgur.com/a/R4p3k
Thanks for this GB!
Looks like you have that slight color discoloration line as well :( Kinda bummed about it tbh. Does anyone know if there is any possible way to remove that line without re-anodizing?
I have not noticed it until you told me :eek:... Damn you :mad:
Anyway I will check it when I get home. As I have not noticed it before hopefully I will not, later as well.
Post by: aaron6301 on Wed, 13 July 2016, 16:47:10
My build is now finished:
Duck Octagon V2 https://imgur.com/a/R4p3k
Thanks for this GB!
Looks like you have that slight color discoloration line as well :( Kinda bummed about it tbh. Does anyone know if there is any possible way to remove that line without re-anodizing?
I have not noticed it until you told me :eek:... Damn you :mad:
Anyway I will check it when I get home. As I have not noticed it before hopefully I will not, later as well.
Sorry bud, didn't mean to rain on your parade. Thought you might've noticed it... If it's any consolation, I have that line on my board as well :-[
Post by: ctrlX on Wed, 13 July 2016, 16:59:53
In pictures 2 & 3, there is a faint line on the top and bottom aluminum case that runs parallel to the angel of the top case. Looks darker or lighter than the rest of the case depending on the viewing angle. It's faint and hardly noticeable, but it's there.Hmm. Hardly noticeable on the images. I will have to check on mine when I get back home from vacation. I've got top black and bottom silver case. Silver bottom is not in use at the moment though. As I am using the acrylic bottom.
EDIT: I've only seen the faint line on the Silver/Gray boards.
Post by: iamtootallforthis on Wed, 13 July 2016, 21:08:12
My build is now finished:
Duck Octagon V2 https://imgur.com/a/R4p3k
Thanks for this GB!
Looks like you have that slight color discoloration line as well :( Kinda bummed about it tbh. Does anyone know if there is any possible way to remove that line without re-anodizing?
No way to remove it with out re-anodizing.
Post by: airs on Thu, 14 July 2016, 16:16:09
Post by: hkf on Thu, 14 July 2016, 17:34:53
Elton plz.
I just got a shipping notification direct to my auspost account!
Post by: redbanshee on Thu, 14 July 2016, 18:19:57
Elton plz.
I just got a shipping notification direct to my auspost account!
HYPE
Post by: beckshl on Thu, 14 July 2016, 19:09:43
Post by: elton5354 on Fri, 15 July 2016, 11:17:57
Post by: airs on Fri, 15 July 2016, 11:34:05
Post by: Chewypost on Fri, 15 July 2016, 12:47:15
Post by: hkf on Fri, 15 July 2016, 19:11:10
Awesome! What courier would this be going with?
It's EMS so whatever your local carrier is (in your case Canada Post)
Post by: Chewypost on Sat, 16 July 2016, 00:58:02
Thanks. Can't waitAwesome! What courier would this be going with?
It's EMS so whatever your local carrier is (in your case Canada Post)
Post by: AceRuckus on Sun, 17 July 2016, 22:15:57
Post by: gaiden on Mon, 18 July 2016, 16:08:44
Post by: redbanshee on Mon, 18 July 2016, 16:34:55
Post by: boo on Mon, 18 July 2016, 18:03:11
I got my box, packaging was fantastic, 5/7!! every thing checks out! one question: is the silver top/bottom supposed to be the same shade as the silver aluminum switch plate? mine is different shades when putting them next to each other. starting to think i got the blue-grey instead. can anyone confirm if the silver alum case has the same shade as the silver alum switch plate? thanks guys..
Hey Gaiden,
I've also ordered silver but looks more blue-grey ish as well. Not that I mind at all and I think it looks fantastic either way but I was wondering if my order was switched around with someone else's
Post by: gaiden on Mon, 18 July 2016, 18:05:03
Sent from my SM-G900T using Tapatalk
Post by: Proyoyo on Mon, 18 July 2016, 18:37:23
Post by: billhicks on Mon, 18 July 2016, 18:39:05
If anyone is interested in assembling my kit, I am in need of help & would like to work with someone based in the US and that has a good reputation. Any suggestions of whom to contact are also appreciated.
Post by: witbliz on Tue, 19 July 2016, 04:04:05
My keyboard just arrived at work ! Can't wait for my stabs to arrive and I'll be hibernating in my room !
Sent from my iPhone using Tapatalk
Post by: redbanshee on Tue, 19 July 2016, 10:12:58
Show Image(http://uploads.tapatalk-cdn.com/20160719/9675f4b6ad320bfb61a1248da74acc00.jpg)Show Image(http://uploads.tapatalk-cdn.com/20160719/107a105bfa061997c7372d07767b2c39.jpg)
My keyboard just arrived at work ! Can't wait for my stabs to arrive and I'll be hibernating in my room !
Sent from my iPhone using Tapatalk
Blues!? :eek: :-X
Post by: cirrus82 on Tue, 19 July 2016, 11:03:56
Show Image(http://uploads.tapatalk-cdn.com/20160719/9675f4b6ad320bfb61a1248da74acc00.jpg)Show Image(http://uploads.tapatalk-cdn.com/20160719/107a105bfa061997c7372d07767b2c39.jpg)
My keyboard just arrived at work ! Can't wait for my stabs to arrive and I'll be hibernating in my room !
Sent from my iPhone using Tapatalk
Blues!? :eek: :-X
Blues for life! Although I have to say, Gateron Greens are surprisingly crisp.
Post by: darkclone24 on Tue, 19 July 2016, 16:13:04
Thanks for such a great group buy Elton!
Post by: AceRuckus on Wed, 20 July 2016, 14:04:14
Post by: onmybikedrunk on Thu, 21 July 2016, 11:31:17
(http://i.imgur.com/PuKbfsy.jpg)
Post by: gaiden on Thu, 21 July 2016, 13:06:19
The mailman was good to me yesterday...Show Image(http://i.imgur.com/PuKbfsy.jpg)
mailman made a mistake, those 1080 were supposed to be at my front door.. :))
Post by: Proyoyo on Fri, 22 July 2016, 03:15:17
The mailman was good to me yesterday...Show Image(http://i.imgur.com/PuKbfsy.jpg)
Nice!
Post by: -musubi on Fri, 22 July 2016, 23:23:29
Post by: aaron6301 on Sat, 23 July 2016, 01:31:43
Anyone have some more insight on how the LED UP and DOWN work for O2D firmware? All I get are two levels of brightness... either all the way up or completely off.Led Up/Down serves as On/Off when not in "Led Ctrl" mode. The brightness of each led group can be adjusted via Led Up/Down once Led Ctrl is toggled.
Example of adjusting Led brightness on Alphas:
1. Toggle Led Ctrl On
2. Toggle Alpha Layer
3. Adjust brightness via Led Up/Down
4. Toggle Led Ctrl Off
5. Alphas will maintain brightness level set
Sent from my SAMSUNG-SM-G925A using Tapatalk
Post by: -musubi on Sat, 23 July 2016, 01:34:49
Anyone have some more insight on how the LED UP and DOWN work for O2D firmware? All I get are two levels of brightness... either all the way up or completely off.Led Up/Down serves as On/Off when not in "Led Ctrl" mode. The brightness of each led group can be adjusted via Led Up/Down once Led Ctrl is toggled.
Example of adjusting Led brightness on Alphas:
1. Toggle Led Ctrl On
2. Toggle Alpha Layer
3. Adjust brightness via Led Up/Down
4. Toggle Led Ctrl Off
5. Alphas will maintain brightness level set
Sent from my SAMSUNG-SM-G925A using Tapatalk
Dude you are AWESOME! thank you for the really clear explanation, haha I would have never guessed that was how the Led Ctrl worked :thumb:
Post by: aaron6301 on Sat, 23 July 2016, 01:41:46
Sure thing. Just passing along the knowledge nugget from one member to another :thumb:Anyone have some more insight on how the LED UP and DOWN work for O2D firmware? All I get are two levels of brightness... either all the way up or completely off.Led Up/Down serves as On/Off when not in "Led Ctrl" mode. The brightness of each led group can be adjusted via Led Up/Down once Led Ctrl is toggled.
Example of adjusting Led brightness on Alphas:
1. Toggle Led Ctrl On
2. Toggle Alpha Layer
3. Adjust brightness via Led Up/Down
4. Toggle Led Ctrl Off
5. Alphas will maintain brightness level set
Sent from my SAMSUNG-SM-G925A using Tapatalk
Dude you are AWESOME! thank you for the really clear explanation, haha I would have never guessed that was how the Led Ctrl worked :thumb:
Sent from my SAMSUNG-SM-G925A using Tapatalk
Post by: -musubi on Sat, 23 July 2016, 02:39:24
Sure thing. Just passing along the knowledge nugget from one member to another :thumb:Anyone have some more insight on how the LED UP and DOWN work for O2D firmware? All I get are two levels of brightness... either all the way up or completely off.Led Up/Down serves as On/Off when not in "Led Ctrl" mode. The brightness of each led group can be adjusted via Led Up/Down once Led Ctrl is toggled.
Example of adjusting Led brightness on Alphas:
1. Toggle Led Ctrl On
2. Toggle Alpha Layer
3. Adjust brightness via Led Up/Down
4. Toggle Led Ctrl Off
5. Alphas will maintain brightness level set
Sent from my SAMSUNG-SM-G925A using Tapatalk
Dude you are AWESOME! thank you for the really clear explanation, haha I would have never guessed that was how the Led Ctrl worked :thumb:
Sent from my SAMSUNG-SM-G925A using Tapatalk
You ever get the issue where when using leds that when typing really fast for a long period if time, the leds fade down? I know there's a mode where that's the behavior but I'm getting it no matter what when all the leds are on...
Post by: ctrlX on Sat, 23 July 2016, 03:26:02
This happens to me also. Both on my Octagon and Orion. No clue why though. Would be nice to know what is causing this.Sure thing. Just passing along the knowledge nugget from one member to another :thumb:Anyone have some more insight on how the LED UP and DOWN work for O2D firmware? All I get are two levels of brightness... either all the way up or completely off.Led Up/Down serves as On/Off when not in "Led Ctrl" mode. The brightness of each led group can be adjusted via Led Up/Down once Led Ctrl is toggled.
Example of adjusting Led brightness on Alphas:
1. Toggle Led Ctrl On
2. Toggle Alpha Layer
3. Adjust brightness via Led Up/Down
4. Toggle Led Ctrl Off
5. Alphas will maintain brightness level set
Sent from my SAMSUNG-SM-G925A using Tapatalk
Dude you are AWESOME! thank you for the really clear explanation, haha I would have never guessed that was how the Led Ctrl worked :thumb:
Sent from my SAMSUNG-SM-G925A using Tapatalk
You ever get the issue where when using leds that when typing really fast for a long period if time, the leds fade down? I know there's a mode where that's the behavior but I'm getting it no matter what when all the leds are on...
Post by: -musubi on Sat, 23 July 2016, 03:29:56
Great to know I'm not the only one, I'm going crazy trying to get the LEDs to do what I want lol. I noticed that if I leave it at default max brightness with the rgb backlight the dimming doesn't occur. However if I'm using any customized led setting then it'll happen.This happens to me also. Both on my Octagon and Orion. No clue why though. Would be nice to know what is causing this.Sure thing. Just passing along the knowledge nugget from one member to another :thumb:Anyone have some more insight on how the LED UP and DOWN work for O2D firmware? All I get are two levels of brightness... either all the way up or completely off.Led Up/Down serves as On/Off when not in "Led Ctrl" mode. The brightness of each led group can be adjusted via Led Up/Down once Led Ctrl is toggled.
Example of adjusting Led brightness on Alphas:
1. Toggle Led Ctrl On
2. Toggle Alpha Layer
3. Adjust brightness via Led Up/Down
4. Toggle Led Ctrl Off
5. Alphas will maintain brightness level set
Sent from my SAMSUNG-SM-G925A using Tapatalk
Dude you are AWESOME! thank you for the really clear explanation, haha I would have never guessed that was how the Led Ctrl worked :thumb:
Sent from my SAMSUNG-SM-G925A using Tapatalk
You ever get the issue where when using leds that when typing really fast for a long period if time, the leds fade down? I know there's a mode where that's the behavior but I'm getting it no matter what when all the leds are on...
Post by: Chewypost on Sat, 23 July 2016, 10:54:40
Post by: MoarCoffeePlzzz on Sat, 23 July 2016, 16:29:08
Post by: Weiss on Sat, 23 July 2016, 17:52:22
Will this ever be redone as a new buy?
Probably as Octagon v3 but who knows what's in between then and now.
Post by: shangrila500 on Sat, 23 July 2016, 18:31:04
Will this ever be redone as a new buy?
Probably as Octagon v3 but who knows what's in between then and now.
And now I start to kick myself for not joining the GB.
Post by: airs on Sat, 23 July 2016, 20:08:58
Post by: Dreamre on Sat, 23 July 2016, 21:50:35
Has anyone in Canada used SIP sockets in their build yet? I'm having trouble trying to source proper SIP sockets that won't cost me an arm and a leg for pins.
I got mine from Zeal, it's costly, but it's quick and it's longer than the traditional ones.
Post by: shangrila500 on Mon, 25 July 2016, 00:26:03
Has anyone in Canada used SIP sockets in their build yet? I'm having trouble trying to source proper SIP sockets that won't cost me an arm and a leg for pins.
I got mine from Zeal, it's costly, but it's quick and it's longer than the traditional ones.
That is where I always buy mine from too. The actual SIP sockets are that expensive from Zeal, just the shipping. It is worth it though, he uses DHL overnight shipping and I absolutely LOVE getting my stuff the next day so I can go ahead and get started. Totally worth it!
Post by: xninetynine on Mon, 25 July 2016, 01:39:14
Post by: onmybikedrunk on Tue, 26 July 2016, 03:27:39
Post by: beckshl on Fri, 05 August 2016, 22:05:49
Post by: Proyoyo on Sat, 06 August 2016, 08:48:54
Not sure how true this is, but there's a red flag about beckshl.
Post by: xninetynine on Sat, 06 August 2016, 08:49:59
https://www.reddit.com/r/mechmarket/comments/4uj9qe/meta_scammer_umrbeckshl/
Not sure how true this is, but there's a red flag about beckshl.
Good looking out proyoyo. I PMed him earlier. Lol
Post by: beckshl on Sat, 06 August 2016, 09:34:18
Post by: xondat on Sat, 06 August 2016, 09:39:30
lol how believable, explain yourself! :-\https://www.reddit.com/r/mechmarket/comments/4uj9qe/meta_scammer_umrbeckshl/
Not sure how true this is, but there's a red flag about beckshl.
Something went wrong and I'm trying to sell my kit to refund this case.
Post by: airs on Tue, 09 August 2016, 17:55:29
Pics from the build: https://imgur.com/a/1bkJe
(https://i.imgur.com/8I0tk9D.jpg)
Post by: Kubiedo on Tue, 09 August 2016, 21:39:58
Post by: Chewypost on Thu, 11 August 2016, 17:46:34
Post by: Dreamre on Thu, 11 August 2016, 18:04:58
Hey Elton, I've sent you a PM but haven't heard back. I really need the parts I'm missing.
What are you missing?
Post by: Chewypost on Thu, 11 August 2016, 18:47:12
Hey Elton, I've sent you a PM but haven't heard back. I really need the parts I'm missing.
What are you missing?
Screws and feet. I only got 14 screw for the flat acrylic plate, and 0 screws and feet for my Acrylic angled piece
Post by: Chewypost on Thu, 11 August 2016, 19:02:42
Post by: Dreamre on Thu, 11 August 2016, 20:25:05
Also having a bit of trouble with flashing my keyboard. I think I may have messed up flashing it. The keyboard is recognized, but no lights or keys register with they computer.
PM me your email and I'll send you my HEX configuration and try flashing it with that.
Post by: Chewypost on Thu, 11 August 2016, 20:27:28
Pm'dAlso having a bit of trouble with flashing my keyboard. I think I may have messed up flashing it. The keyboard is recognized, but no lights or keys register with they computer.
PM me your email and I'll send you my HEX configuration and try flashing it with that.
Post by: Chewypost on Thu, 11 August 2016, 21:25:19
Post by: omgar on Thu, 11 August 2016, 21:25:54
Still having problems. Seems to be stuck in DFU and I can't get it out :/ still looking for some help please
Have you tried flashing through FLIP?
Post by: Chewypost on Thu, 11 August 2016, 21:31:51
Still having problems. Seems to be stuck in DFU and I can't get it out :/ still looking for some help please
Have you tried flashing through FLIP?
I've held down the 2nd button to the top- right, yes. but I held down the top right most button before that and I think that may have screwed something up. Now whenever I plug it in regardless of holding down the button or not, it goes straight to DFU.
Post by: omgar on Thu, 11 August 2016, 22:06:29
Still having problems. Seems to be stuck in DFU and I can't get it out :/ still looking for some help please
Have you tried flashing through FLIP?
I've held down the 2nd button to the top- right, yes. but I held down the top right most button before that and I think that may have screwed something up. Now whenever I plug it in regardless of holding down the button or not, it goes straight to DFU.
Sorry, I mean literally flashing the HEX file through Atmel FLIP? (http://www.atmel.com/tools/FLIP.aspx) You would build your HEX through O2D and then flash it with FLIP. You could follow this guide (https://geekhack.org/index.php?topic=49647.0) save for the HEX building part. Proceed with caution.
Post by: Chewypost on Thu, 11 August 2016, 22:51:18
Still having problems. Seems to be stuck in DFU and I can't get it out :/ still looking for some help please
Have you tried flashing through FLIP?
I've held down the 2nd button to the top- right, yes. but I held down the top right most button before that and I think that may have screwed something up. Now whenever I plug it in regardless of holding down the button or not, it goes straight to DFU.
Sorry, I mean literally flashing the HEX file through Atmel FLIP? (http://www.atmel.com/tools/FLIP.aspx) You would build your HEX through O2D and then flash it with FLIP. You could follow this guide (https://geekhack.org/index.php?topic=49647.0) save for the HEX building part. Proceed with caution.
Just tried doing that. Erase and Blank Check pass but the Program step fails.
Post by: omgar on Fri, 12 August 2016, 08:26:37
Got mine yesterday!, won't be building it fully till I move in 10 days, anyone got any ideas for a black/green themed keycap set, or any other ideas I have the silver base also need to buy a usb wire.. thinking going with Zeal's green and black
Have you checked out Toxic set?
It would take sometime to find one now though
Still having problems. Seems to be stuck in DFU and I can't get it out :/ still looking for some help please
Have you tried flashing through FLIP?
I've held down the 2nd button to the top- right, yes. but I held down the top right most button before that and I think that may have screwed something up. Now whenever I plug it in regardless of holding down the button or not, it goes straight to DFU.
Sorry, I mean literally flashing the HEX file through Atmel FLIP? (http://www.atmel.com/tools/FLIP.aspx) You would build your HEX through O2D and then flash it with FLIP. You could follow this guide (https://geekhack.org/index.php?topic=49647.0) save for the HEX building part. Proceed with caution.
Just tried doing that. Erase and Blank Check pass but the Program step fails.
Appleonama had a similar problem (https://geekhack.org/index.php?topic=70864.msg2123951#msg2123951) with his Orion V2 PCB. Maybe he wouldn't mind helping you out?
Post by: Dreamre on Fri, 12 August 2016, 11:53:42
Got mine yesterday!, won't be building it fully till I move in 10 days, anyone got any ideas for a black/green themed keycap set, or any other ideas I have the silver base also need to buy a usb wire.. thinking going with Zeal's green and black
Have you checked out Toxic set?
It would take sometime to find one now thoughStill having problems. Seems to be stuck in DFU and I can't get it out :/ still looking for some help please
Have you tried flashing through FLIP?
I've held down the 2nd button to the top- right, yes. but I held down the top right most button before that and I think that may have screwed something up. Now whenever I plug it in regardless of holding down the button or not, it goes straight to DFU.
Sorry, I mean literally flashing the HEX file through Atmel FLIP? (http://www.atmel.com/tools/FLIP.aspx) You would build your HEX through O2D and then flash it with FLIP. You could follow this guide (https://geekhack.org/index.php?topic=49647.0) save for the HEX building part. Proceed with caution.
Just tried doing that. Erase and Blank Check pass but the Program step fails.
Appleonama had a similar problem (https://geekhack.org/index.php?topic=70864.msg2123951#msg2123951) with his Orion V2 PCB. Maybe he wouldn't mind helping you out?
You have to hole the top right key and then plug the keyboard in to get it into DFU mode. Holding that button is most likely for some type of function.
Post by: Chewypost on Fri, 12 August 2016, 12:54:05
Got mine yesterday!, won't be building it fully till I move in 10 days, anyone got any ideas for a black/green themed keycap set, or any other ideas I have the silver base also need to buy a usb wire.. thinking going with Zeal's green and black
Have you checked out Toxic set?
It would take sometime to find one now thoughStill having problems. Seems to be stuck in DFU and I can't get it out :/ still looking for some help please
Have you tried flashing through FLIP?
I've held down the 2nd button to the top- right, yes. but I held down the top right most button before that and I think that may have screwed something up. Now whenever I plug it in regardless of holding down the button or not, it goes straight to DFU.
Sorry, I mean literally flashing the HEX file through Atmel FLIP? (http://www.atmel.com/tools/FLIP.aspx) You would build your HEX through O2D and then flash it with FLIP. You could follow this guide (https://geekhack.org/index.php?topic=49647.0) save for the HEX building part. Proceed with caution.
Just tried doing that. Erase and Blank Check pass but the Program step fails.
Appleonama had a similar problem (https://geekhack.org/index.php?topic=70864.msg2123951#msg2123951) with his Orion V2 PCB. Maybe he wouldn't mind helping you out?
You have to hole the top right key and then plug the keyboard in to get it into DFU mode. Holding that button is most likely for some type of function.
So I've got it to flash through FLIP, which is good news. Still doesn't flash through 02D, which is kind of a bummer.
Post by: Chewypost on Fri, 12 August 2016, 14:06:24
Post by: kingnestea on Sun, 14 August 2016, 15:50:29
Post by: pmh1410 on Tue, 16 August 2016, 08:34:39
Post by: airs on Tue, 16 August 2016, 12:16:15
Post by: Kubiedo on Sun, 21 August 2016, 10:31:01
Thanks!
Post by: airs on Sun, 21 August 2016, 10:39:13
Post by: redbanshee on Sun, 21 August 2016, 10:40:20
Just a quick question... I saw that the pcb supports rgb smd leds, but is that only for the underlight, or can we do it for switches? For instance, would these work with zeal's rgb lights?
Thanks!
It does support in switch LED's but not the RGB 4 pin ones.
Post by: yookwh on Sun, 21 August 2016, 20:07:11
Post by: ryan92084 on Mon, 22 August 2016, 08:38:03
Post by: Weiss on Thu, 01 September 2016, 02:43:05
Willing to pay quite a hefty amount.
Post by: breitling on Wed, 14 September 2016, 16:32:09
Post by: eksuen on Wed, 14 September 2016, 16:39:12
Programmed mine without a hitch the first time, but can't seem to get it to program again with ATMEL FLip or with the DFU programmer.. it doesn't seem to have the correct driver installed. Holding the right key above backspace and plugging it in does not seem to get the ATMEL USB to show up under Device Manager either.. does anyone know how I can get the correct drive installed? Thanks!
If I recall correctly, the key you want to hold is the upper right most key in the corner. Try that one.
Post by: breitling on Wed, 14 September 2016, 16:49:09
Programmed mine without a hitch the first time, but can't seem to get it to program again with ATMEL FLip or with the DFU programmer.. it doesn't seem to have the correct driver installed. Holding the right key above backspace and plugging it in does not seem to get the ATMEL USB to show up under Device Manager either.. does anyone know how I can get the correct drive installed? Thanks!
If I recall correctly, the key you want to hold is the upper right most key in the corner. Try that one.
Thanks that key does seem to load the keyboard up in a different mode.. all the LEDs are off and the keyboard does not respond. No difference in device manager and I cannot flash it still.. says "Check ATMEL USB Driver"...
Post by: breitling on Wed, 14 September 2016, 16:57:35
Post by: eksuen on Wed, 14 September 2016, 17:02:07
Figured it out... someone another driver got installed over it and it was showing up in device manager under Universal Serial Bus Devices... I deleted that driver and it reverted back to the original driver and works now. Thanks!!
Fantastic.
Post by: Chewypost on Wed, 21 September 2016, 23:48:16
Post by: beltet on Wed, 02 November 2016, 06:21:45
Post by: Chewypost on Wed, 02 November 2016, 09:56:38
Have anyone managed to turn of the underlight LED's? Can't find any option for it in O2D programmer. Also have anyone tested some other firmware? For example TMK?You can turn them off via RGB Mode key set. You toggle it through LED mode under FM layer 4 and it's set default to F5 or something.
Post by: xauser on Wed, 02 November 2016, 15:29:49
Post by: redbanshee on Wed, 02 November 2016, 15:47:22
I'm almost done with porting octagon v2 to tmk. Matrix works, status and rgb leds work. I'll have to test switch leds (not soldered yet). I'm not sure how to let the user control all these led combinations.
Hell yea man I sure hope you share that github link!
Post by: gaiden on Wed, 02 November 2016, 17:47:39
I'm almost done with porting octagon v2 to tmk. Matrix works, status and rgb leds work. I'll have to test switch leds (not soldered yet). I'm not sure how to let the user control all these led combinations.Wow this is awesome! More LEDs controls is what i have been hoping for
Sent from my SM-G935F using Tapatalk
Post by: xauser on Thu, 03 November 2016, 14:09:42
Have fun
https://github.com/xauser/tmk_keyboard/tree/xauser (https://github.com/xauser/tmk_keyboard/tree/xauser)
Post by: tjweir on Thu, 03 November 2016, 17:56:39
I traced the octagon v2 pcb and created a low level api in tmk to control the hardware. I haven't spend any time on led effects, maybe someone will carry on from here. This firmware isn't much tested and should only be used by tmk experts first.
Have fun
https://github.com/xauser/tmk_keyboard/tree/xauser (https://github.com/xauser/tmk_keyboard/tree/xauser)
I used xauser's tmk port for my Octagon V1s. Recommended, would flash firmware again. :)
Post by: gaiden on Thu, 03 November 2016, 18:50:31
Hoping someone would be able to carry the LEDs control and eventually making this compatible with all Duck boardsI traced the octagon v2 pcb and created a low level api in tmk to control the hardware. I haven't spend any time on led effects, maybe someone will carry on from here. This firmware isn't much tested and should only be used by tmk experts first.
Have fun
https://github.com/xauser/tmk_keyboard/tree/xauser (https://github.com/xauser/tmk_keyboard/tree/xauser)
I used xauser's tmk port for my Octagon V1s. Recommended, would flash firmware again. :)
Sent from my SM-G935F using Tapatalk
Post by: NoChance on Thu, 03 November 2016, 20:00:31
Post by: kenshinjeff on Thu, 03 November 2016, 22:35:32
I traced the octagon v2 pcb and created a low level api in tmk to control the hardware. I haven't spend any time on led effects, maybe someone will carry on from here. This firmware isn't much tested and should only be used by tmk experts first.
Have fun
https://github.com/xauser/tmk_keyboard/tree/xauser (https://github.com/xauser/tmk_keyboard/tree/xauser)
This is really cool work man.
Post by: AceRuckus on Fri, 04 November 2016, 00:35:24
Post by: witbliz on Sun, 27 November 2016, 22:09:15
Sent from my iPhone using Tapatalk
Post by: witbliz on Wed, 30 November 2016, 04:19:57
Sent from my iPhone using Tapatalk
Post by: Pemdas on Wed, 30 November 2016, 04:35:16
Hi guys , I'm having issues with flashing the firmware. Is there anybody having a 7 space bar hex file I can use ?
Sent from my iPhone using Tapatalk
I'm using a 7x spacebar on my octagon, here's the hex file for it.
Hope it helps :thumb:
Post by: witbliz on Wed, 30 November 2016, 04:36:09
Sent from my iPhone using Tapatalk
Post by: yookwh on Wed, 30 November 2016, 21:14:15
Post by: FactoryDefaults on Fri, 02 December 2016, 09:05:12
Post by: kawasaki161 on Fri, 02 December 2016, 09:16:04
Does anyone know if it's possible that the underglow has a solid color and stays on? I've tried all led options on o2d mapper but closest I get is a solid color and slowly pulsing on and off. Anything I'm missing?
I tried the same for the Duck Black Bird, without having the board glitch (I'll get back to that later) the only possible thing is setting all LEDs to the same color which means reflashing if you want to change said color.
So, to the glitching. I don't know how this exactly happened, but it happened a few times already. Somehow you can swap the color palettes used for the modes, so you can have reactive multicolors and static monocolors. How? No idea, but it has to be a glitch because it is not documented at all (or just in Korean) and I was not able to trigger it when going through the standard functions.
Post by: FactoryDefaults on Fri, 02 December 2016, 11:14:58
Does anyone know if it's possible that the underglow has a solid color and stays on? I've tried all led options on o2d mapper but closest I get is a solid color and slowly pulsing on and off. Anything I'm missing?
I tried the same for the Duck Black Bird, without having the board glitch (I'll get back to that later) the only possible thing is setting all LEDs to the same color which means reflashing if you want to change said color.
So, to the glitching. I don't know how this exactly happened, but it happened a few times already. Somehow you can swap the color palettes used for the modes, so you can have reactive multicolors and static monocolors. How? No idea, but it has to be a glitch because it is not documented at all (or just in Korean) and I was not able to trigger it when going through the standard functions.
Thanks I got it to work! For anyone else wondering, open your HEX file in O2D keymapper, go to Tools -> RGB color preset http://i.imgur.com/veqdToS.png and set every color there to the same one. Then flash your HEX file to your board again. Like kawasaki said, the downside is that you gotta flash your HEX file each time you want a different color, but this is a great solution if you're looking for a solid color for a longer term.
Post by: yookwh on Fri, 02 December 2016, 12:25:22
Post by: RocketGruntJake on Wed, 04 January 2017, 01:11:50
Post by: RocketGruntJake on Wed, 04 January 2017, 01:38:23
My new PCB is unresponsive, I downloaded the O2D tool and plugged the usb in holding the second key from the top left and nothing happens, Anyone have some quick pointers?
When I plug it in the mini usb connector gets very hot rapidly. Is something soldered incorrectly on my PCB?
Post by: RocketGruntJake on Wed, 04 January 2017, 08:13:25
Anyone have any idea?
There is no response from the keyboard or PC when plugged in(windows 10)
Post by: ctrlX on Wed, 04 January 2017, 08:27:58
Post by: Dreamre on Wed, 04 January 2017, 08:40:15
PCB pics
Anyone have any idea?
There is no response from the keyboard or PC when plugged in(windows 10)
Have you tried it prior to installing the holtite sockets? Did you buy the PCB separately? Or are you building your kit?
Post by: RocketGruntJake on Wed, 04 January 2017, 08:42:47
have you tried flashing it with Atmel Flip instead? First time was going to flash my Octagon V2 it didn't respond either. Only after I flashed it with Flip for the first time. Did you perform the hot-swap mod on the PCB or did you receive it as is?
The PCB was new in bag from the person I bought this Octagon Kit from. It was wrapped up in the original plastic.
Where is that switch? That may be the cause but I am away from home today for work.
I preformed the hotlite mod myself, It is a solderless Job save for one pad that wouldn't fit a hotlite. I have set up several boards now with hotlites and have had 0 issues.
Post by: RocketGruntJake on Wed, 04 January 2017, 08:45:12
PCB pics
Anyone have any idea?
There is no response from the keyboard or PC when plugged in(windows 10)
Have you tried it prior to installing the holtite sockets? Did you buy the PCB separately? Or are you building your kit?
I sadly did not test before inserting the hotlites, however I used no solder in their installation so couldn't have burned anything out. I have done the hotlite mod on several keyboards now with no issue. This seems to be an issue with the board as it is unresponsive when plugged into the PC. The PCB/Plate was in the sealed bag, I bought it off another user with one built pcb and one unbuilt, finally decided to build this one and nothing, womp.
Post by: Dreamre on Wed, 04 January 2017, 08:45:31
have you tried flashing it with Atmel Flip instead? First time was going to flash my Octagon V2 it didn't respond either. Only after I flashed it with Flip for the first time. Did you perform the hot-swap mod on the PCB or did you receive it as is?
The PCB was new in bag from the person I bought this Octagon Kit from. It was wrapped up in the original plastic.
Where is that switch? That may be the cause but I am away from home today for work.
I preformed the hotlite mod myself, It is a solderless Job save for one pad that wouldn't fit a hotlite. I have set up several boards now with hotlites and have had 0 issues.
That's a program he's referring to, not a physical switch.
Post by: RocketGruntJake on Wed, 04 January 2017, 08:50:20
have you tried flashing it with Atmel Flip instead? First time was going to flash my Octagon V2 it didn't respond either. Only after I flashed it with Flip for the first time. Did you perform the hot-swap mod on the PCB or did you receive it as is?
The PCB was new in bag from the person I bought this Octagon Kit from. It was wrapped up in the original plastic.
Where is that switch? That may be the cause but I am away from home today for work.
I preformed the hotlite mod myself, It is a solderless Job save for one pad that wouldn't fit a hotlite. I have set up several boards now with hotlites and have had 0 issues.
That's a program he's referring to, not a physical switch.
Ahh okay, is there a guide to flashing the pcb with Atmel Flip for the first time? CTRLx do you have any pointers after having done exactly that?
Post by: ctrlX on Wed, 04 January 2017, 14:44:44
have you tried flashing it with Atmel Flip instead? First time was going to flash my Octagon V2 it didn't respond either. Only after I flashed it with Flip for the first time. Did you perform the hot-swap mod on the PCB or did you receive it as is?
The PCB was new in bag from the person I bought this Octagon Kit from. It was wrapped up in the original plastic.
Where is that switch? That may be the cause but I am away from home today for work.
I preformed the hotlite mod myself, It is a solderless Job save for one pad that wouldn't fit a hotlite. I have set up several boards now with hotlites and have had 0 issues.
That's a program he's referring to, not a physical switch.
Ahh okay, is there a guide to flashing the pcb with Atmel Flip for the first time? CTRLx do you have any pointers after having done exactly that?
Launch 02D and map your keys, RGB LED colors etc. Save the HEX file and launch Atmel Flip. Before connecting your PCB to your PC USB port, press and hold the physical FLIP key on your Octagon. In Atmel Flip software go to File > Load Hex file and then Device > Program (if I remember correctly).
If that doesn't work have you verified that you PC can discover the Atmel chip? This guide helped me out when I was having problems: http://www.adamfalwell.com/projects/octagon/assets/-simplified-guide--duck-pcb-flash-firmware---keymapping.docx
Other members also had problems with flashing the Octagon V2. You can read about it from here (maybe that conversation mentions something I've missed): https://geekhack.org/index.php?topic=78549.msg2238881#msg2238881
Atmel Flip can be downloaded from here: http://www.atmel.com/tools/flip.aspx
Good luck and hopefully everything works out in the end.
Post by: RocketGruntJake on Wed, 04 January 2017, 16:58:58
L1 - small black has 000 printed on it
R78-R73 - small black has 4700 printed on it
Heat up to a very high temperature compared to the rest of the components.
This leads me to believe that something related to them is off that is causing this. anyone know what those components are and what could possibly be wrong. I don't think they are one direction as between my two octagon pcbs they are wildly different directions for all components of the same type.
Halp pls
Post by: RocketGruntJake on Wed, 04 January 2017, 17:12:56
Listen to my yarn...
Based on the fact that a small section of the resistors heating up I figured the issue must lie at one end of the parts in question, a short maybe. On the right side there was nothing that could cause it, on the left, Zeal Screw in Stabs.... Sure enough they cause a short when screwed into the Enter key position on the octagon PCB. What a novel issue.
This is a word of warning, make sure you put an o-ring or something similar when you use screw in stabs on any Duck PCB where the traces pass around the stab hole.
Thanks for everyone who checked out my issues.
Post by: roostrc0gburn on Wed, 04 January 2017, 17:20:06
Post by: RocketGruntJake on Wed, 04 January 2017, 17:37:59
what is goin on with that bottom right switch? did you solder in that holtite?
Hey Rooster,
Yeah for some reason that one socket would not allow a hotlite to fit in it. I've seriously messed up a pcb trying to force a hotlite in so now I just make a single solder joint if necessary. No hotlite there.
Post by: roostrc0gburn on Wed, 04 January 2017, 17:54:08
Post by: RocketGruntJake on Wed, 04 January 2017, 20:15:40
nice job trouble-shooting that. i remember some other guy on reddit recently burning up his board. idk if he was using zeal stabs or not, but definitely catostrophic
Happily mine still works, pics later!
Post by: gaiden on Wed, 04 January 2017, 21:15:49
Post by: Weiss on Wed, 04 January 2017, 23:50:46
Here is my problem, I try to use O2D keymapper (version 1.8.622) and when I select Octagon V2 the arrow keys are all question marks "?" "?" "?" and if i try to map arrow keys elsewhere and save I would get Error "76" is there a better version of the O2D or may another software that can do keymapping for duck boards? Thank in advance for any suggestions.
You have to open the O2D keymapper with Korean locale iirc, otherwise you will get the error and have your arrow keys be question marks.
Post by: ctrlX on Thu, 05 January 2017, 01:04:45
Ladies and gentlemen I figured it out,Good job figuring it out. I will definitely double check your findings as I have 3 builds coming up with Zeal stabs and Leeku PCBs.
Listen to my yarn...
Based on the fact that a small section of the resistors heating up I figured the issue must lie at one end of the parts in question, a short maybe. On the right side there was nothing that could cause it, on the left, Zeal Screw in Stabs.... Sure enough they cause a short when screwed into the Enter key position on the octagon PCB. What a novel issue.
This is a word of warning, make sure you put an o-ring or something similar when you use screw in stabs on any Duck PCB where the traces pass around the stab hole.
Thanks for everyone who checked out my issues.
Post by: RocketGruntJake on Thu, 05 January 2017, 01:19:41
[attachimg=1]
[attachimg=2]
[attachimg=3]
[attachimg=4]
My frankengon:
Lubed mod H switches for Alphas, Spacebar, and Function keys
Lubed clear linear gateron stems in Zealios housing with 78g springs for the mods
Zealistotles for the enter and escape keys
Feels pretty darn good:)
Post by: gaiden on Thu, 05 January 2017, 01:31:54
For putting up with my questions I present picturesthat's how i wanted to set my keys (like yours) by swap pipe "|\" with "Backspace" how did you do yours? please list out your procedures it is much appreciated :)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
My frankengon:
Lubed mod H switches for Alphas, Spacebar, and Function keys
Lubed clear linear gateron stems in Zealios housing with 78g springs for the mods
Zealistotles for the enter and escape keys
Feels pretty darn good:)
Here is my problem, I try to use O2D keymapper (version 1.8.622) and when I select Octagon V2 the arrow keys are all question marks "?" "?" "?" and if i try to map arrow keys elsewhere and save I would get Error "76" is there a better version of the O2D or may another software that can do keymapping for duck boards? Thank in advance for any suggestions.
You have to open the O2D keymapper with Korean locale iirc, otherwise you will get the error and have your arrow keys be question marks.
Installed Korean language, changed system locale, still gets Run Time Error "76" Path not found: I basically just download the keymapper, unzip, and run it. I'm trying to set change caplock to layer2 and on layer2 map arrow keys to I,J,K,L and when i save i get the error and the program closes... what am i doing wrong?
Post by: Dreamre on Thu, 05 January 2017, 12:11:10
Ladies and gentlemen I figured it out,Good job figuring it out. I will definitely double check your findings as I have 3 builds coming up with Zeal stabs and Leeku PCBs.
Listen to my yarn...
Based on the fact that a small section of the resistors heating up I figured the issue must lie at one end of the parts in question, a short maybe. On the right side there was nothing that could cause it, on the left, Zeal Screw in Stabs.... Sure enough they cause a short when screwed into the Enter key position on the octagon PCB. What a novel issue.
This is a word of warning, make sure you put an o-ring or something similar when you use screw in stabs on any Duck PCB where the traces pass around the stab hole.
Thanks for everyone who checked out my issues.
Wow, thanks for sharing. Glad you got it figured out!
Post by: Chewypost on Fri, 06 January 2017, 08:50:30
Ladies and gentlemen I figured it out,That's something that sounds like it shouldn't be happening. Have you contacted zeal to see if it was an issue with just your batch or something other people have reported? I've got some coming in too so I'm glad this was something that got caught before I installed mine into another board.
Listen to my yarn...
Based on the fact that a small section of the resistors heating up I figured the issue must lie at one end of the parts in question, a short maybe. On the right side there was nothing that could cause it, on the left, Zeal Screw in Stabs.... Sure enough they cause a short when screwed into the Enter key position on the octagon PCB. What a novel issue.
This is a word of warning, make sure you put an o-ring or something similar when you use screw in stabs on any Duck PCB where the traces pass around the stab hole.
Thanks for everyone who checked out my issues.
Post by: ctrlX on Sun, 15 January 2017, 17:35:49
Any suggestions is greatly appreciated. Cheers!
Post by: yookwh on Tue, 17 January 2017, 20:48:24
Downloading the O2D file and the dfu-prog-usb-1.2.2 and then moving the O2D into the dfu folder, holding down the button before plugging in the USB cable, selecting the dfu folder for driver installation) work completely fine. Any ideas here?
Post by: balotelli00 on Tue, 17 January 2017, 21:42:38
Post by: alveeno on Tue, 17 January 2017, 22:22:35
is this still on? bacause i couldn't join..gb closed
Post by: unoab on Tue, 17 January 2017, 23:09:54
Based on the fact that a small section of the resistors heating up I figured the issue must lie at one end of the parts in question, a short maybe. On the right side there was nothing that could cause it, on the left, Zeal Screw in Stabs.... Sure enough they cause a short when screwed into the Enter key position on the octagon PCB. What a novel issue.That's something that sounds like it shouldn't be happening. Have you contacted zeal to see if it was an issue with just your batch or something other people have reported? I've got some coming in too so I'm glad this was something that got caught before I installed mine into another board.
This is a word of warning, make sure you put an o-ring or something similar when you use screw in stabs on any Duck PCB where the traces pass around the stab hole.
look at IMG_2410.JPG in his post (https://geekhack.org/index.php?topic=78549.msg2332517#msg2332517) with the PCB pics, and then look at the topmost stab screw. The screw head is shorting out LED pads, unless zeal has smaller head screws, it is always going to be a possibility on multi-layout boards that this can happen as stab holes are going to be near pads for alternate switch placements. So, not a batch issue, more so a weird compatibility issue that requires a small insulator as a workaround.
Post by: yookwh on Wed, 18 January 2017, 00:07:31
1) Installed Flash (I completely forgot that I didn't have this thing installed)
2) Installed Flip 3.4.7
3) Installed the latest 02D software that includes Octagon V2, and not just V1
4) Mapped out everything in O2D
5) Brought it over to Flip
And it works!
Post by: smithyithy on Thu, 19 January 2017, 07:22:39
Post by: bmmcwhirt on Fri, 20 January 2017, 15:46:29
Post by: KHAANNN on Sat, 21 January 2017, 03:30:42
Post by: ihalatch on Sun, 29 January 2017, 21:27:04
Post by: Mr_BeastQuake on Sun, 29 January 2017, 21:45:07
Octagon V3 Group Buy any time soon?
Viper/Eagle hasn't shipped, Lightsaver is next, then maybe Octagon. So, no, not "soon".
Post by: gaiden on Sat, 04 February 2017, 20:37:47
(http://i.imgur.com/ZG7g1y7.png)
I wish they spent more time to make this more user friendly, if anyone knows what i'm doing wrong please do tell. thanks guys :'(
Post by: CMYK on Sat, 04 February 2017, 20:46:13
Post by: gaiden on Sat, 04 February 2017, 20:56:50
Are you getting that when you are trying to save your layout? I read in the Duck BlackBird thread that you have to create your own name, and it should save the hex file.
thanks, I figured it out after making that post... so the program puts slashes "/" in the name (why?!?) and it errors out due to an illegal naming scheme.
here is my next questions:
DFU or FLIP? what are the proper steps for each software?
Also can anyone explain these? (http://i.imgur.com/dajO3oa.jpg)
Post by: gaiden on Sat, 04 February 2017, 23:36:52
[Download] - This Zip file http://www.filedropper.com/duckkeymappero2d-dfu-steps (http://www.filedropper.com/duckkeymappero2d-dfu-steps) contains the following:
- O2D_KeyMapper_Custom_v1.8.622 (Duck board keymapper, also activates DFU during firmware keymap uploads)
- dfu-programmer-win-0.7.2 (has correct Atmel USB device driver inside - read simplified guide for details)
- -simplified-guide--duck-pcb-flash-firmware---keymapping (helpful instructions for programming Duck boards)
[Apps & Files]
- Korean language pack for Windows (apparently this is needed due to Korean arrows in O2D app)
- O2D KeyMapper Custom v1.8.622 (use this to make your keymap)
- dfu-programmer (uploads your keymap hex file, activates through O2D)
- dfu-prog-usb-1.2.2 (manual update your Atmel USB device to ATmega32u4)
- Adobe Flashplayer (mentioned by a fellow geekhacker it was needed for the FLIP app so you may not need it here at all, i mentioned it because I installed it..)
[Notes]
- when doing keymaps i use Layer1 (default) and then FN1, FN2, etc and set my FN1, FN2 function keys accordingly. I'm not sure the difference between Layer 2 and FN2 but FN2 worked for me here so i'm sticking with it.
- when saving your keymap, GIVE IT A NEW NAME & DO NOT USE THE NAME GIVEN BY O2D, apparently it adds slashes "/" to the name and when you attempt to save the app crashes on Error 76 which i can only assume is due to Windows not liking the illegal naming scheme
- before flashing you need to hold the FLIP key before connecting your OctagonV2 to USB. OctagonV2's FLIP key is TOP RIGHT KEY, when i held mine and connect to USB all the Indicator LEDs were turned OFF so maybe this can help you confirm that you did it right.
- Once your OctagonV2 is in the right mode and it's ready to flash, go to O2D>File>Firmware Upload. if the OctagonV2 is connected correctly the first step "1). DFU & Connect Check" should be in "yellow color". Next File Open and select your saved keymap file. 2). File Open will turn yellow once that's done. Press Upload. another small DOS window will popup and the firmware upload begins. just press any key when done!
- you can go to O2D>Tools>Key tester to test confirm your keymap. :thumb:
I'm making a note here hoping some of it will help new owners with their Making/Uploading Duck firmwares. Happy clacking guys!
Post by: tuananh_bkk on Wed, 15 February 2017, 01:00:24
Post by: axm2 on Sun, 05 March 2017, 00:02:48
Post by: yookwh on Sun, 05 March 2017, 13:33:45
Post by: axm2 on Sun, 05 March 2017, 16:21:06
edit: Tried it on 3 windows 10 pc's, and it just worked like a normal keyboard everytime :(
edit2: Pause/Break doesn't appear to work in the key tester, could that be an issue?
Post by: yookwh on Mon, 06 March 2017, 10:44:08
Post by: axm2 on Mon, 06 March 2017, 10:55:59
Is this on a board you just made? Or did you buy it pre-built? If it's the latter, did it happen all of the sudden, or when you received it?
Bought it from another user, I fixed it now though. One of the solder joints came loose during shipping. Should've been the first thing I checked honestly, oops.
Post by: P1kas on Sat, 11 March 2017, 22:07:21
Post by: gaiden on Sat, 11 March 2017, 22:26:55
Has anyone weighed this board? I'd like to see how it compares to other top mount 75% cases.5.5lb or ~2.5kg
Sent from my SM-G935F using Tapatalk
Post by: yookwh on Sat, 13 May 2017, 21:59:53
Post by: Charizard on Sun, 21 May 2017, 02:09:18
Post by: -musubi on Wed, 24 May 2017, 00:15:31
Basically when I plug the board back in, the top right light stays lit and the caps/top right key LEDs stay active. No keys get registered when typing.
Would appreciate it if anyone could give some insight (switch is the "B" key, next to the D71 and R85). Thanks!
(http://i.imgur.com/CrVpYXY.jpg)
(http://i.imgur.com/8jSddLx.jpg)
(http://i.imgur.com/8NXsO1h.jpg)
Post by: hkf on Wed, 24 May 2017, 00:20:14
Well who would've thought I'd screw up my most prized possession... thought I'd be cool and try to desolder a switch cause it made a slightly different pingy noise (barely noticeable) and got carried away at how I kept failing and eventually burnt some of the pads. Called it quits and soldered it back just to find out that my whole keyboard was rendered useless... anyone know if a single switch could do that?
Basically when I plug the board back in, the top right light stays lit and the caps/top right key LEDs stay active. No keys get registered when typing.
Would appreciate it if anyone could give some insight (switch is the "B" key, next to the D71 and R85). Thanks!Show Image(http://i.imgur.com/CrVpYXY.jpg)Show Image(http://i.imgur.com/8jSddLx.jpg)Show Image(http://i.imgur.com/8NXsO1h.jpg)
You will definitely need to jump some traces to get it fixed. I can see some broken traces near R85 just from the pics you provided. best ofluck
Post by: -musubi on Wed, 24 May 2017, 00:24:39
Well who would've thought I'd screw up my most prized possession... thought I'd be cool and try to desolder a switch cause it made a slightly different pingy noise (barely noticeable) and got carried away at how I kept failing and eventually burnt some of the pads. Called it quits and soldered it back just to find out that my whole keyboard was rendered useless... anyone know if a single switch could do that?
Basically when I plug the board back in, the top right light stays lit and the caps/top right key LEDs stay active. No keys get registered when typing.
Would appreciate it if anyone could give some insight (switch is the "B" key, next to the D71 and R85). Thanks!Show Image(http://i.imgur.com/CrVpYXY.jpg)Show Image(http://i.imgur.com/8jSddLx.jpg)Show Image(http://i.imgur.com/8NXsO1h.jpg)
You will definitely need to jump some traces to get it fixed. I can see some broken traces near R85 just from the pics you provided. best ofluck
Thanks for the suggestion, I will try that once I've given myself a bit of a break from my regret and frustration... do you think I should bother connecting up the led trace as well? I figured that one isn't as important since taking out the LED makes it open anyways. I thought the one above was for the resistors as well (also tied to the LEDs) but maybe it is important... definitely the top suspect for now though.
Post by: merlin64 on Wed, 24 May 2017, 00:29:14
Post by: hkf on Wed, 24 May 2017, 00:33:26
Well who would've thought I'd screw up my most prized possession... thought I'd be cool and try to desolder a switch cause it made a slightly different pingy noise (barely noticeable) and got carried away at how I kept failing and eventually burnt some of the pads. Called it quits and soldered it back just to find out that my whole keyboard was rendered useless... anyone know if a single switch could do that?
Basically when I plug the board back in, the top right light stays lit and the caps/top right key LEDs stay active. No keys get registered when typing.
Would appreciate it if anyone could give some insight (switch is the "B" key, next to the D71 and R85). Thanks!Show Image(http://i.imgur.com/CrVpYXY.jpg)Show Image(http://i.imgur.com/8jSddLx.jpg)Show Image(http://i.imgur.com/8NXsO1h.jpg)
You will definitely need to jump some traces to get it fixed. I can see some broken traces near R85 just from the pics you provided. best ofluck
Thanks for the suggestion, I will try that once I've given myself a bit of a break from my regret and frustration... do you think I should bother connecting up the led trace as well? I figured that one isn't as important since taking out the LED makes it open anyways. I thought the one above was for the resistors as well (also tied to the LEDs) but maybe it is important... definitely the top suspect for now though.
I think it may not matter, it depends on how it flows.
It's probably something crossing and shorting causing a few keys to get sent / locking your board up, but other than that I can't be of much help other than suggesting which solder sucker to use (https://www.amazon.com/Engineer-SS-02-Solder-Sucker/dp/B002MJMXD4/ref=s9u_wsim_gw_i1?_encoding=UTF8&fpl=fresh&pd_rd_i=B002MJMXD4&pd_rd_r=FRV550TVKXCNSAKYM4M1&pd_rd_w=2G3K8&pd_rd_wg=Jo9mm&pf_rd_m=ATVPDKIKX0DER&pf_rd_s=&pf_rd_r=JKNAM1N2SER3GNJKB5R3&pf_rd_t=36701&pf_rd_p=2a4fafb6-9fdc-425a-aee8-c82daa7b18ed&pf_rd_i=desktop)
Post by: -musubi on Wed, 24 May 2017, 00:50:11
Oh No!! I'm sorry to hear that musubi! This is actually one of the reasons why I still haven't built my kit. I'm looking into holtites since I can't seem to get a metal switch plate just perfect.
Haha don't make the same mistakes I made :'( it was actually working fine it was just me and my bad desoldering skills (this was my 2nd session/attempt at the same key so I didn't have much room to work with anyways so I probably should've left it alone after the first time).
Well who would've thought I'd screw up my most prized possession... thought I'd be cool and try to desolder a switch cause it made a slightly different pingy noise (barely noticeable) and got carried away at how I kept failing and eventually burnt some of the pads. Called it quits and soldered it back just to find out that my whole keyboard was rendered useless... anyone know if a single switch could do that?
Basically when I plug the board back in, the top right light stays lit and the caps/top right key LEDs stay active. No keys get registered when typing.
Would appreciate it if anyone could give some insight (switch is the "B" key, next to the D71 and R85). Thanks!Show Image(http://i.imgur.com/CrVpYXY.jpg)Show Image(http://i.imgur.com/8jSddLx.jpg)Show Image(http://i.imgur.com/8NXsO1h.jpg)
You will definitely need to jump some traces to get it fixed. I can see some broken traces near R85 just from the pics you provided. best ofluck
Thanks for the suggestion, I will try that once I've given myself a bit of a break from my regret and frustration... do you think I should bother connecting up the led trace as well? I figured that one isn't as important since taking out the LED makes it open anyways. I thought the one above was for the resistors as well (also tied to the LEDs) but maybe it is important... definitely the top suspect for now though.
I think it may not matter, it depends on how it flows.
It's probably something crossing and shorting causing a few keys to get sent / locking your board up, but other than that I can't be of much help other than suggesting which solder sucker to use (https://www.amazon.com/Engineer-SS-02-Solder-Sucker/dp/B002MJMXD4/ref=s9u_wsim_gw_i1?_encoding=UTF8&fpl=fresh&pd_rd_i=B002MJMXD4&pd_rd_r=FRV550TVKXCNSAKYM4M1&pd_rd_w=2G3K8&pd_rd_wg=Jo9mm&pf_rd_m=ATVPDKIKX0DER&pf_rd_s=&pf_rd_r=JKNAM1N2SER3GNJKB5R3&pf_rd_t=36701&pf_rd_p=2a4fafb6-9fdc-425a-aee8-c82daa7b18ed&pf_rd_i=desktop)
The funny thing is the first time I tried desoldering it I used a cheapo $5 one, and told myself I would buy one of these if I tried again. Ended up buying it and the 2nd time around I think the pads were already a bit too worn for at least an inexperienced desolderer like me and this happened... lol T___T Seriously though the LED pads are the hardest, still couldn't get out the switch in the end.
Post by: zoomwalt on Wed, 24 May 2017, 01:10:31
Post by: dubious on Wed, 24 May 2017, 12:04:32
These stories are why I have 4 unbuilt duck kits sitting in my closet.
what a shame :/
Post by: theillumedpanda on Wed, 24 May 2017, 12:30:18
These stories are why I have 4 unbuilt duck kits sitting in my closet.It's really not that difficult and if you're not feeling confident enough, why don't practice your soldering skills on a cheaper pcb?
Post by: zoomwalt on Wed, 24 May 2017, 12:32:04
These stories are why I have 4 unbuilt duck kits sitting in my closet.It's really not that difficult and if you're not feeling confident enough, why don't practice your soldering skills on a cheaper pcb?
A lot of it is I've been really busy. I'll probably attempt one later this year.
Post by: gaiden on Wed, 24 May 2017, 13:19:46
These stories are why I have 4 unbuilt duck kits sitting in my closet.Oh man, I didn't know so many people are afraid they will mess up. I have put together about a dozen custom boards including Duck & TX boards, a couple Ergodox, fixed a few boards too. If anyone just need a board to put together I might be able to help. Thought I would throw this out there. I really want to see more assembled board pictures and not kits sitting in a box somewhere collecting dust.
Sent from my SM-G935F using Tapatalk
Post by: theillumedpanda on Wed, 24 May 2017, 18:12:35
This. Many people would love to have the chance to even own one Duck keyboard and others, who were luckier getting their hands on one have them lying around unbuilt. Bit of a shame I think about it.These stories are why I have 4 unbuilt duck kits sitting in my closet.Oh man, I didn't know so many people are afraid they will mess up. I have put together about a dozen custom boards including Duck & TX boards, a couple Ergodox, fixed a few boards too. If anyone just need a board to put together I might be able to help. Thought I would throw this out there. I really want to see more assembled board pictures and not kits sitting in a box somewhere collecting dust.
Sent from my SM-G935F using Tapatalk
I'm sure that zoomwalt can do it and he should ask as many question as necessary; there are a lot of people lurking who are more than willing to help! You can do this!
Post by: hkf on Wed, 24 May 2017, 18:21:58
These stories are why I have 4 unbuilt duck kits sitting in my closet.It's really not that difficult and if you're not feeling confident enough, why don't practice your soldering skills on a cheaper pcb?
this
soldering is a joke with a temp controlled station
Post by: -musubi on Thu, 25 May 2017, 02:39:02
(http://i.imgur.com/e4gZzmM.jpg)
Post by: theillumedpanda on Thu, 25 May 2017, 02:41:23
Post by: -musubi on Thu, 25 May 2017, 02:47:30
Glad to hear that it works! Would you mind showing a few more captures of the keyboard as a whole?
Thanks! And sure, do you mean of just the pcb or of the actual board itself? It's not a new build or anything :))
Post by: theillumedpanda on Thu, 25 May 2017, 04:06:22
The actual build itself. I don't think I've seen it before! :)Glad to hear that it works! Would you mind showing a few more captures of the keyboard as a whole?
Thanks! And sure, do you mean of just the pcb or of the actual board itself? It's not a new build or anything :))
Post by: hkf on Thu, 25 May 2017, 17:07:44
Good news everyone! Got my baby to work again with some jumpers (rip traces and pads). Guess the trace running parallel with all of the LEDs is an important power rail or something (would've expected it to be parallel with each LED row and not so critical), but good thing they have those debug holes for easy troubleshooting. Also the switch pad was dead as well but that was more obvious.Show Image(http://i.imgur.com/e4gZzmM.jpg)
Nice fix.
It's very odd that the power rail is not in series on the MCU. But that's on the designer...
Post by: -musubi on Thu, 25 May 2017, 18:22:59
Good news everyone! Got my baby to work again with some jumpers (rip traces and pads). Guess the trace running parallel with all of the LEDs is an important power rail or something (would've expected it to be parallel with each LED row and not so critical), but good thing they have those debug holes for easy troubleshooting. Also the switch pad was dead as well but that was more obvious.Show Image(http://i.imgur.com/e4gZzmM.jpg)
Nice fix.
It's very odd that the power rail is not in series on the MCU. But that's on the designer...
Ye
The actual build itself. I don't think I've seen it before! :)Glad to hear that it works! Would you mind showing a few more captures of the keyboard as a whole?
Thanks! And sure, do you mean of just the pcb or of the actual board itself? It's not a new build or anything :))
Good news everyone! Got my baby to work again with some jumpers (rip traces and pads). Guess the trace running parallel with all of the LEDs is an important power rail or something (would've expected it to be parallel with each LED row and not so critical), but good thing they have those debug holes for easy troubleshooting. Also the switch pad was dead as well but that was more obvious.Show Image(http://i.imgur.com/e4gZzmM.jpg)
Nice fix.
It's very odd that the power rail is not in series on the MCU. But that's on the designer...
Yeah maybe it's just that rail that happens to share power with critical components since it's closer but who knows :p
The actual build itself. I don't think I've seen it before! :)Glad to hear that it works! Would you mind showing a few more captures of the keyboard as a whole?
Thanks! And sure, do you mean of just the pcb or of the actual board itself? It's not a new build or anything :))
Ahh okay, here's a few pics of it:
(http://i.imgur.com/PXGK21x.jpg)
(http://i.imgur.com/0S2qLDd.jpg)
Post by: P1kas on Sat, 27 May 2017, 20:10:07
Show Image(http://i.imgur.com/0S2qLDd.jpg)
Is that Sky Dolch + Ocean Dolch?
Post by: poolside on Sun, 28 May 2017, 02:54:24
Show Image(http://i.imgur.com/0S2qLDd.jpg)
Is that Sky Dolch + Ocean Dolch?
Ocean Dolch has not shipped yet. The mods are from Hyperfuse.
Post by: -musubi on Sun, 28 May 2017, 05:19:27
Show Image(http://i.imgur.com/0S2qLDd.jpg)
Is that Sky Dolch + Ocean Dolch?
Ocean Dolch has not shipped yet. The mods are from Hyperfuse.
Yup that's correct, hyperfuse mods and sky dolch alphas. I believe ocean dolch would be the same color code though.
Post by: merlin64 on Tue, 20 June 2017, 11:48:37
Post by: gaiden on Tue, 20 June 2017, 11:56:23
With much encouragement, and finally getting some time. I would like to announce that I am finally building my Octagon V2 this coming Saturday, June 24th, 2017. :DWill there be a live stream?😀
Sent from my SM-G935F using Tapatalk
Post by: merlin64 on Tue, 20 June 2017, 12:09:35
Post by: merlin64 on Thu, 22 June 2017, 09:32:44
Post by: dubious on Thu, 22 June 2017, 13:55:30
The Seattle crew is doing a build party on someone's roof top. I don't think I'll be live streaming it, but that is a good idea. Maybe when I build my Duck Eagle..sometime around 2018 or so
when's this build party you speak of? :)
Post by: kawasaki161 on Fri, 23 June 2017, 15:56:19
For those of you curious....holtites (even the tin ones) fit super loosely on the Octagon V2. Looks like I'll be soldering them in.
If the PCB is made to the same spec as the Blackbird one, don't add solder to the pads, they already come with a bit of solder on them, just get a soldering iron with a clean tip and press them in like that, works perfect.
Post by: merlin64 on Fri, 23 June 2017, 16:05:04
The Seattle crew is doing a build party on someone's roof top. I don't think I'll be live streaming it, but that is a good idea. Maybe when I build my Duck Eagle..sometime around 2018 or so
when's this build party you speak of? :)
It's tomorrow at 4! Are you in Seattle?
Post by: merlin64 on Fri, 23 June 2017, 16:05:50
For those of you curious....holtites (even the tin ones) fit super loosely on the Octagon V2. Looks like I'll be soldering them in.
If the PCB is made to the same spec as the Blackbird one, don't add solder to the pads, they already come with a bit of solder on them, just get a soldering iron with a clean tip and press them in like that, works perfect.
Post by: kawasaki161 on Fri, 23 June 2017, 17:24:43
I got it working! Didn't have to use a soldering iron. Between the plate, and the PCB mount studs, everything is perfect. Guess what I'm typing on?
Korean alu goodness?
Post by: merlin64 on Fri, 23 June 2017, 18:33:19
Any of you know what those holes on the top right are for...and what the standard layout for this board is?
Post by: kawasaki161 on Sat, 24 June 2017, 04:03:01
Post by: dubious on Sat, 24 June 2017, 17:14:26
The Seattle crew is doing a build party on someone's roof top. I don't think I'll be live streaming it, but that is a good idea. Maybe when I build my Duck Eagle..sometime around 2018 or so
when's this build party you speak of? :)
It's tomorrow at 4! Are you in Seattle?
Nope, not till next weekend. Looking forward to pics and a video hopefully!
Post by: giangpn on Fri, 25 August 2017, 10:49:07
So I'm super lucky that I just acquired an Octagon V2; however, I'm super curious about how the indicator LEDs (on the top right corner) works and what does it mean? I kinda see a few is Caps/Num/Scroll but what about the rest?
Also, is there a way to program the Underglow LEDs to be static? I'm trying to have Cyan underglow but it keeps on throbbing haha.
Thanks!
Post by: kawasaki161 on Fri, 25 August 2017, 11:38:07
To set the underglow to a static color you have to edit the colors in the keymap. Open your keymap, then select tools on the top, then select RGB color preset and then change all of them to the color you want.
Post by: giangpn on Sat, 26 August 2017, 17:52:31
The other indicators show you which layer you are currently on.
To set the underglow to a static color you have to edit the colors in the keymap. Open your keymap, then select tools on the top, then select RGB color preset and then change all of them to the color you want.
thanks buddy! do you know what is the exact name for RGB Color Preset in the keymapper? I saw RGB Mode, RGB Sel - and RGB Sel + but no matter how much I switch the RGB Mode, I can't find a static one.
Post by: kawasaki161 on Sat, 26 August 2017, 17:59:19
(http://puu.sh/xkjyg/3affa8a5b5.png)
Change to:
(http://puu.sh/xkjAW/2a55c427a6.png)
Then hit apply, then close, then save like you would save a keymap and then flash it :thumb:
Post by: giangpn on Sat, 26 August 2017, 18:11:23
Show Image(http://puu.sh/xkjxc/fb07126c91.png)Show Image(http://puu.sh/xkjyg/3affa8a5b5.png)
Change to:Show Image(http://puu.sh/xkjAW/2a55c427a6.png)
Then hit apply, then close, then save like you would save a keymap and then flash it :thumb:
oooooh my, I'm feeling super dumb right now lol. Thanks a lot buddy!
Post by: gaiden on Sat, 26 August 2017, 20:20:30
Kind of wish this software would get a facelift to something more intuitive and user friendly similar to the bootmapper.Show Image(http://puu.sh/xkjxc/fb07126c91.png)Show Image(http://puu.sh/xkjyg/3affa8a5b5.png)
Change to:Show Image(http://puu.sh/xkjAW/2a55c427a6.png)
Then hit apply, then close, then save like you would save a keymap and then flash it :thumb:
oooooh my, I'm feeling super dumb right now lol. Thanks a lot buddy!
Sent from my SM-G935F using Tapatalk
Post by: kawasaki161 on Sun, 27 August 2017, 04:35:11
The placement of the side menus is pretty bad, but I think the keymapping itself is a lot better than Bootmapper Client because it actually shows you the layout of the board and not just a grid with keys that don't make sense unless you hit the button to see what it corresponds to.Kind of wish this software would get a facelift to something more intuitive and user friendly similar to the bootmapper.Show Image(http://puu.sh/xkjxc/fb07126c91.png)Show Image(http://puu.sh/xkjyg/3affa8a5b5.png)
Change to:Show Image(http://puu.sh/xkjAW/2a55c427a6.png)
Then hit apply, then close, then save like you would save a keymap and then flash it :thumb:
oooooh my, I'm feeling super dumb right now lol. Thanks a lot buddy!
Sent from my SM-G935F using Tapatalk
Post by: gaiden on Sun, 27 August 2017, 07:09:32
It's not all bad, but things like connecting to keymapping software and changing colors s super easy on other software. No holding the flip key and reconnect keyboard necessay. Again, only pointing it out because seen others like WKL and TAX boards work better in some aspects.The placement of the side menus is pretty bad, but I think the keymapping itself is a lot better than Bootmapper Client because it actually shows you the layout of the board and not just a grid with keys that don't make sense unless you hit the button to see what it corresponds to.Kind of wish this software would get a facelift to something more intuitive and user friendly similar to the bootmapper.Show Image(http://puu.sh/xkjxc/fb07126c91.png)Show Image(http://puu.sh/xkjyg/3affa8a5b5.png)
Change to:Show Image(http://puu.sh/xkjAW/2a55c427a6.png)
Then hit apply, then close, then save like you would save a keymap and then flash it :thumb:
oooooh my, I'm feeling super dumb right now lol. Thanks a lot buddy!
Sent from my SM-G935F using Tapatalk
Sent from my SM-G935F using Tapatalk
Post by: giangpn on Mon, 18 September 2017, 15:51:24
Post by: Unforgivable on Mon, 13 November 2017, 22:05:37
Post by: __foo_ on Wed, 06 December 2017, 03:02:57
Post by: Puddsy on Wed, 06 December 2017, 03:41:49
Make v3 happen, please! Hard to find a 75% this quality in the market right now.
has been confirmed it won't
duck wants to move on to new designs
Post by: KetchyKech on Wed, 06 December 2017, 16:29:53
Post by: Puddsy on Wed, 06 December 2017, 16:30:18
Octagonv2 PCB just up and died on me -- any ideas where to get another pcb that fits the octagonv2 case? or am i SOL :-[
SOL
or make a mechmarket post
make sure it wasn't your cable or the USB port
Post by: zoomwalt on Thu, 07 December 2017, 01:30:48
Octagonv2 PCB just up and died on me -- any ideas where to get another pcb that fits the octagonv2 case? or am i SOL :-[
SOL
or make a mechmarket post
make sure it wasn't your cable or the USB port
Does a TX-75 PCB fit the octagon case?
Post by: Puddsy on Thu, 07 December 2017, 03:03:20
Octagonv2 PCB just up and died on me -- any ideas where to get another pcb that fits the octagonv2 case? or am i SOL :-[
SOL
or make a mechmarket post
make sure it wasn't your cable or the USB port
Does a TX-75 PCB fit the octagon case?
not as far as i'm aware, but i've never tried
on my spreadsheet it says it doesn't work, but i can't for the life of me remember where i heard that
worth a shot, the USB port is in the same spot at least
Post by: Puddsy on Sat, 09 December 2017, 11:43:31
Post by: KetchyKech on Sat, 09 December 2017, 12:39:34
I've confirmed that the TX75 PCB WILL work with an octagon. You won't be able to use the pinhole indicators, though.
yess!!! Thank you :)! Now I just gotta ask kin to sell me one :thumb:
many thanks m8
Post by: merlin64 on Wed, 13 December 2017, 22:40:43
Everything seems to work just fine....except I can't test backlighting as I never soldered in in-switch LEDs...was wondering if someone would be kind enough to test it out for me and possibly even report back any issues? Can't promise I won't brick your board lol, but I am typing this on a QMK powered Octagon V2 right now.
https://github.com/mechmerlin/qmk_firmware/tree/master/keyboards/octagon_v2
Post by: merlin64 on Mon, 18 December 2017, 09:57:19
Real Story: HD with my octagon v2 hex files and the programmer died...didn't want to invest time in finding the right version tool and getting frustrated with it all over again.
https://github.com/qmk/qmk_firmware/tree/master/keyboards/octagon
Post by: cirrus82 on Mon, 18 December 2017, 10:57:48
PULL REQUEST accepted by jack! I've had no problems using my octagon v2 with this firmware so far!
Real Story: HD with my octagon v2 hex files and the programmer died...didn't want to invest time in finding the right version tool and getting frustrated with it all over again.
https://github.com/qmk/qmk_firmware/tree/master/keyboards/octagon_v2
This is awesome, thanks for contributing it!
Post by: Jhors2 on Tue, 19 December 2017, 14:32:18
Post by: eksuen on Tue, 19 December 2017, 14:57:57
Just out of curiosity there is no way to get the clusters of LEDs running different modes like in O2D right? Meaning, F row keys running breathing mode while alphas respond to key press speed or something.
You can have them in different modes. You can select different modes for alphas, modifiers, and function keys (F row).
Post by: Jhors2 on Tue, 19 December 2017, 23:09:07
Just out of curiosity there is no way to get the clusters of LEDs running different modes like in O2D right? Meaning, F row keys running breathing mode while alphas respond to key press speed or something.
You can have them in different modes. You can select different modes for alphas, modifiers, and function keys (F row).
Sorry, this was in response to the QMK firmware. Is that possible with QMK as well?
Thanks!
Post by: eksuen on Tue, 19 December 2017, 23:11:14
Just out of curiosity there is no way to get the clusters of LEDs running different modes like in O2D right? Meaning, F row keys running breathing mode while alphas respond to key press speed or something.
You can have them in different modes. You can select different modes for alphas, modifiers, and function keys (F row).
Sorry, this was in response to the QMK firmware. Is that possible with QMK as well?
Thanks!
Ah. In that case, I don't know.
Post by: Weiss on Thu, 21 December 2017, 17:21:34
Post by: KetchyKech on Sat, 22 September 2018, 12:21:54
I've no luck securing a TX-75 PCB, anyone know of any other PCBs that work with the Octagon V2 ? :thumb:
....or someone selling a TX-75 PCB!
Post by: _ODIN_ on Mon, 24 December 2018, 12:01:59
Post by: Rumblehotep on Sun, 30 December 2018, 20:33:20
Any chance for a v3 in the future?This count? https://www.instagram.com/p/Br0H8uYnon-/
Post by: _ODIN_ on Mon, 31 December 2018, 02:24:09
Tray mount :(Any chance for a v3 in the future?This count? https://www.instagram.com/p/Br0H8uYnon-/
Gesendet von meinem H8416 mit Tapatalk