[IC] Geekhack Wrist Rest

[Marclgw]

First Geekhack Wrist Rest Interest Check  )


To make this a successful Interest Check/Group Buy.

Below are Parts and Pieces to be taken into consideration.


Available in 104 Full Size and 87 TKL size.

Will consider making for 60% keyboards if demand is there.


1.

LOGO

Note: The "Geekhack" will be done by making a Brass Mould with the fonts to be stamped on the wrist rest upon completion.


Planning to use the below font,


As well as the Dimension of the word Geekhack?


[I need someone who is able to do out the chosen fonts on words or make it into any picture format to be submitted for mould making]


2. Material
   
    Material for the wrist rest will be synthetic leather.

    Genuine Leather is available for Black color only.

    Colors available [AFAIK]:
   

• Black
• Navy Blue
• White

     

3. Threading Colors

    To make the wrist rest stand out more , the threading on the sides of the wrist rest must be of a contrasting color.

     Eg. Navy Blue Leather with White Thread etc.

     


     Orange , Red , Blue , White , Black

     
4. Combination of color of wrist rest plus threading

    To finalise the few models that we will have.

    We need to list down the best combination to make the wrist rest.

     ALL IDEAS WELCOME!



5. Positioning of the Logo

     BOTTOM RIGHT HAND CORNER (similar to Ducky and Filco)
   


6. Base of the Wrist Rest

    Base will be a hard anti slip rubber like textile to prevent the use of 4 rubber feets at each end to increase the height of the wrist rest.

    ONLY AVAILABLE IN BLACK

   

Some images of how it may look like at the end.





-----------------------------------------------------------------------------------------------------

Dimension of Wrist Rest:

TKL - 37x10x1.8 (cm)

Full Size - 45x10x1.8 (cm)

--------------------------------------------------------------------------------------------------



Price Guide [NO MOQ, PRICE FIXED] :

Synthetic Leather

• TKL - USD 18 
• Full Size - USD 21

Genuine Leather

Black color only.

• TKL - USD 35
• Full Size - USD 38

[/list]
COO:
China

Mould Cost (Shared Among All Buyers) :
15 USD [To be Finalised]

Shipping Cost:
Unknown , base on the number of orders

[Marclgw]

Updates:







Interested Parties

Reaper  - White Base, Red Stitching
Permeability - Full size
Redndwhite - Black , Red Stitching  + White, Orange stitching
Halverson - White , Orange Sttiching
imadeanaccounttoseepics- Black , Black Stitching
Elton5354- 60%
Alessandro - 60% Black, White Stitching
TDub - Full Size, TKL , 2x60%
NikoGasm - TKL Black  , Black Stitch
Jeroplane - TKL  Black , Orange Stich  or Navy + white stitch.
Eon - TKL , Black with White Stitch
DanGWanG - TKL , Black with Red Stitch
Elrick - TKL ,Full Size, Black with Orange Stitch
Intense - Full Size, Black with White Stitch
Peachesenregalia - TKL , Black with Black Stitch
Myv - Full Size, Black with Red Stitch
OrangeJewce - Full , TKL , Black with Orange Stitch
Samwisekoi - Full size , Black with red/orange stitch
TDub - White , Blue Stitch
Sifo - TKL, White , Blue Stitch
Boost - TKL , Black with Red Stitch

[reaper]

Interested in a white one with red stiching, TKL size.  Position of the logo should be front right like Ducky below (I believe Filco's logo is in the same location).

[Permeability]

Interested in a wrist rest for 104 keyboards  )

[Redndwhite]

I'm interested in two, a 104 and a tenless.

Black with red stitching and white with a baby blue or orange would look cool

[Halverson]

I'm in for a full size white, with whatever stitching. Maybe orange....

[imadeanaccounttoseepics]

I'm In for a 104 keyboard.
Would like to know EXACT pricing and what the total would be each wrist rest + shipping.

I would want a black pad with black threading.. Is It mandatory to have the "Geek Hack" stamped onto the wrist pad?

THANKS!

[elton5354]

How about custom threading? And possibly free shipping base on the numbers ordered?

Oh and I want a 60%

[Alessandro]

I'd be after a 60%. Black leather and white stitching.

[TDub]

Interessted in 1 fullsize, 1 TKL and if you end up making 60% I would be interessted in two of those as well. Depends on the final prize though.

Wristwrest matching some of the round4 sets would be really cool, like black/grey for the dolce, White and blue for the retro or black and orange.

[NikoGasm]

Interested in a TKL. Black threading on black leather. I'd like the logo to be in the bottom right corner.

[jeroplane]

Interested in the TKL.

I agree that the best positioning for the logo would be on the lower right corner of the rest.

Not too fussed about the colours, but the safe bet would be black leather with whatever stitching. Could do GH colours and use orange thread, but that wouldn't match many boards. Personally I think the idea of navy leather + white stitching would look great.

This is a great idea - interested in how it will price!

[eon]

Also interested in a TKL version, in black with white stitching.

Logo in the bottom right corner would be nice

[Marclgw]

Interested in a white one with red stiching, TKL size.  Position of the logo should be front right like Ducky below (I believe Filco's logo is in the same location).

Show Image

Roger that on the positioning of the logo.
2ndly, for red stiching , we will have to base on what majority of the people prefer before we have a go.
I will most likely let this run for the next 2-4 days and gather more information before finalising on the color of thread each different color wrist rest.

Interested in a wrist rest for 104 keyboards  :))

Any Particular color or threading preferred?

I'm interested in two, a 104 and a tenless.

Black with red stitching and white with a baby blue or orange would look cool

Noted, as mentioned to reaper on the first reply, the finalise combination of leather and stiching combination will be out base on the number of request from people who express interest in this thread.

I'm in for a full size white, with whatever stitching. Maybe orange....

Roger, Your prototype are about done .

I'm In for a 104 keyboard.
Would like to know EXACT pricing and what the total would be each wrist rest + shipping.

I would want a black pad with black threading.. Is It mandatory to have the "Geek Hack" stamped onto the wrist pad?

THANKS!

Firstly, since this is a Geekhack Wrist Rest, it would be best to have it on every single wrist rest after all we're part of the Geekhack family isn't it =D

I would not be able to address to you the confirmed shipping cost yet as shipping charges are base on weight. As of now we do not have a confirmed figure yet of the number of pieces we will be doing.

How about custom threading? And possibly free shipping base on the numbers ordered? :D

Oh and I want a 60%

Hi Elton5354,

Chances are no custom threading as factory will be producing in bulk instead of doing it piece by piece. Free shipping will be unlikely, but godly prices will tempt you still =D.

I will see if we need a MOQ to make the 60% . Would be good if someone can provide me with the dimensions for the 60% wrist rest .

I'd be after a 60%. Black leather and white stitching.

Roger

Interessted in 1 fullsize, 1 TKL and if you end up making 60% I would be interessted in two of those as well. Depends on the final prize though.

Wristwrest matching some of the round4 sets would be really cool, like black/grey for the dolce, White and blue for the retro or black and orange.

Any particular color leather you are looking for and threading that goes with the leather color?

Interested in a TKL. Black threading on black leather. I'd like the logo to be in the bottom right corner.

Noted with thanks.

[imadeanaccounttoseepics]

@Marc : Thanks for your response but I'd still prefer not to have the logo stamped on , LOL. As you can see I'm not really a "family member" of Geek Hack since I'm still a newbie!
Like I said though, I prefer not to have It but If It's mandatory then there's no other choice!

[Marclgw]

@Marc : Thanks for your response but I'd still prefer not to have the logo stamped on , LOL. As you can see I'm not really a "family member" of Geek Hack since I'm still a newbie!
Like I said though, I prefer not to have It but If It's mandatory then there's no other choice!

Sad to say that , it will be mandatory , so that the person handling the shipment in US will handle in peace.

LOL.

[imadeanaccounttoseepics]

@Marc : Thanks for your response but I'd still prefer not to have the logo stamped on , LOL. As you can see I'm not really a "family member" of Geek Hack since I'm still a newbie!
Like I said though, I prefer not to have It but If It's mandatory then there's no other choice!

Sad to say that , it will be mandatory , so that the person handling the shipment in US will handle in peace.

LOL.

Ahh I see, Alright then haha.
Sorry but this Is shipped from China then to US then to individual people right?

[DanGWanG]

Black with red stitching.  Tkl size

[Elrick]

TKL and 104.  Black Leather with Orange stitching.

Just a Geek Hack fan.  Since a GB with Charcoal and Orange is already happening, these babies will feel right at home.

[Intense]

Would like a full size if the price is reasonable. black with white stitching

[peachesenregalia]

I'll take a black tenkeyless with black stitching.

[Myv]

Black with red stitching, full size.

[OrangeJewce]

Why is this a debate over the stitching? HAS To be orange!

If you can do this, 1 Full, 1 TKL for me.

Cheers,

[samwisekoi]

Interested in a black 104 with red or orange stitching.  Agree that the logo should be in the lower right corner of the pad.

Personally, I'd size it so the characters were sized to match a keycap face plus ascenders and descenders.

OTOH, I think it would look good -- and nicely professional -- with an imprint to match the current website logo.

 - Ron | samwisekoi

[TDub]

Since it sounds like we won't be to do too many color combinations, I would like at least one option that is very neutral and will look good with any board like black leather with black stitching.

Personally I would also be very interessted in one with white leather and if possible blue stitching but another color stitching would be fine too. But I would probably buy other color combinations as well if thats what we end up going with.

[Sifo]

TKL white blue stitching

[boost]

Put me down for a tkl black with red stitches

[midnight77]

I might be interested in a tkl one.  White/Orange stitching or black/white stitching.

I would prefer having no logo though.  I just prefer things to not have any logos on them whenever possible. 

[xJaPx]

Intetested!  Full size black base pink stitching, 60% white base with red stitching.  Also agree bottom right for.logo

[demik]

I might be interested in a tkl one.  White/Orange stitching or black/white stitching.

I would prefer having no logo though.  I just prefer things to not have any logos on them whenever possible. 

http://elitekeyboards.com/products.php?sub=access,palm_rests

[danielucf]

$70 seems crazy for a wrist rest. I hope the Geekhack ones are not anywhere near as expensive.

[alrgeez]

if the price is right, i'm down for a white or black TKL with orange stitching.

[zhuangqdcn]

I'm interesting in a full size one.

[fruktstund]

Also interested. TKL, white base, blue or white stitching. Or something like that.

[noctoocto]

Interested in a TKL in white or grey with light blue stitching. I don't really care what blue, as long as it's not navy. I might have to back out depending on price and shipping.

[wiredPANDA]

Interested in a TKL (black with orange/red stitch) and interested in a 60% if/when that ever gets an IC.

[imadeanaccounttoseepics]

I might be interested in a tkl one.  White/Orange stitching or black/white stitching.

I would prefer having no logo though.  I just prefer things to not have any logos on them whenever possible. 

I might be interested in a tkl one.  White/Orange stitching or black/white stitching.

I would prefer having no logo though.  I just prefer things to not have any logos on them whenever possible. 

http://elitekeyboards.com/products.php?sub=access,palm_rests

http://elitekeyboards.com/products.php?sub=access,palm_rests

$70 .

[balancebox]

interested in TKL black leather with red stitching and 60% black with orange stitching

[Halverson]

After some thinking, add a tkl black with red stitching to my order. And to help get the ball rolling, a 60% black with orange stitching.
As for the logo, I do like the idea of the sites current logo. Stamped on the bottom right of course.

Oh and.....woo! Prototypes!

[Burz]

I'd be interested if the price is reasonable. My preference would be to get one as long as possible (104+), because I always end up shifting the pad for both keyboard and mouse use.

The initial logo and placement look nice. The only thing I'd be concerned about is if it would wear down too quickly.

FWIW I've already got one wrist rest that's perfect... an old Belkin ErgoPad Premiere (the only thing from Belkin I ever liked). It is flat foam rubber with an equally thick layer of gel underneath, and a plastic base underneath. After 12 or 13 years its starting to wear out. I don't like gel-only rests.

[feng]

Hm.. I was about to do a group buy for these, but I'll wait for a while then. Maybe I could just do it without having the logo.

[danielucf]

I'm interested in a 60% with orange thread if the price is in the $30-40 range. TKL if the 60% doesn't get made.

[prava]

We need to know the price range

[Marclgw]

Not to worry about prices they are definitely not as pricey. In fact with 70 you can buy up to 2 or 3 of them.

[Marclgw]

I will try to allow as many options for  stitching and no logo may be considered. Anyone in CONUS keen on handling this shipment? Pm me to discuss

[imadeanaccounttoseepics]

Not to worry about prices they are definitely not as pricey. In fact with 70 you can buy up to 2 or 3 of them.

Thanks for the updates bro!

EDIT: We need more people interested.. The more people there are the bigger the discount!

[Amarok]

I'm interested in a black TKL with orange/red stitching.

[imadeanaccounttoseepics]

New Updated List :

Interested Parties

Marc - ?
Reaper  - TKL White Base, Red Stitching
Permeability - Full size or TKL, Black with red stitch
Redndwhite - 1 Full size & TKL Black, Red Stitching  + White, Orange stitch
Halverson - Full size, TKL, 60%, White Orange Stitching, Black with red stitch, Black with orange stitch
imadeanaccounttoseepics - Full size Black, Black stitch
Elton5354- 60%, Black with orange stitch
Alessandro - 60%, Black with white stitch
TDub - Full Size, TKL, 2x60%
NikoGasm - TKL Black, Black Stitch
Jeroplane - TKL  Black, Orange Stich  or Navy + white stitch.
Eon - TKL, Black with White Stitch
DanGWanG - TKL, Black with Red Stitch
Elrick - TKL, Full Size, Black with Orange Stitch
Intense - Full Size, Black with White Stitch
Peachesenregalia - TKL, Black with Black Stitch
Myv - Full Size, Black with Red Stitch
OrangeJewce - Full, TKL, Black with Orange Stitch
Samwisekoi - Full size, Black with red/orange stitch
TDub - White, Blue stitch
Sifo - TKL, White, Blue stitch
Boost - TKL, Black with Red stitch
midnight77 - TKL, White or Orange with Black or White stitch
xJaPx - Full size, 60%, Black with pink stitch, White with red stitch
alrgreez - TKL, White or Black with orange stitch
zhuangqdcn - Full size
fruktstund - TKL, White with blue or white stitch
noctoocto - TKL, White or Grey with blue stitch
wiredPANDA - TKL, 60%, Black with orange/red stitch
balancebox - TKL, 60%,  Black with red stitch, Black with orange stitch
Burz - Full size + bigger?
danielucf - 60%, ?
Amarok - TKL, Black with orange or red stitch
jessecoleman - 60%, ?
Lu_e - TKL, Black with black stitch
Appeac - TKL, Black with black stitch
projectD - TKL, White with red stitch
Binge - Full size, Blue with orange stitch
phetto - TKL, Black with white stitch
Lorem-Ipsum - Full size, Black with blue stitch
Sinzz - TKL, Black with orange stitch
quake4mhg - TKL, Black with black stitch
poopmat - TKL, Black with red stitch
fuzzyx3000 - TKL, Black with white sitch
MarkPharaoh - TKL, Black with orange
mehkat1974 - 60%, Black with orange stitch
mickd - Full size, Black with white stitch
oneproduct - 60%, Black with white stitch

48 People so far, Make sure all the information above Is correct.

[Elrick]

Please remember that when these are produced and if the makers want $70+ on their product then the QUALITY has to be up there like Filco Palm Rests.

I've got two already and they are near as perfect as palm rests could be.  Made out of Genuine Leather, absolutely no flex and weigh in quite a bit.  So if you are dealing with Chinese Manufacturers make them understand that the higher the price tag then the Quality has to really be there.

Also pre-production prototypes need to be sent and because the op who started this Group Buy will be in receivership, then he/she needs to provide detailed photos, examination of the rests before it progresses any further.

[jessecoleman]

Add my name to the list for a 60% wrist rest. It all depends on the pricing for me.

[imadeanaccounttoseepics]

Add my name to the list for a 60% wrist rest. It all depends on the pricing for me.

Done!

[Lu_e]

I am interested in TKL black. With preferably black stitching.

[imadeanaccounttoseepics]

I am interested in TKL black. With preferably black stitching.

Done!

[Marclgw]

Will update when I get back, away for 72 hours

[Appeac]

Oooo, TKL with black stitching I would be interested in.

[IPT]

i'd be interested in the same color scheme as reaper:
TKL White Base, Red Stitching

and i agree with Elrick, if this sucker is $20 bucks or so, i won't be really picky about the quality
But if we're talking 50-70, it better be the same firmness and durability as my Filco ones lol

[imadeanaccounttoseepics]

Will update when I get back, away for 72 hours

Np, I'll just keep updating the list till you get back.

[Permeability]

Can you update me on the list to black with red stitches? Full size and/or TKL, depending on price. Thanks!

[Binge]

Very interested full sized, blue leather, orange thread 

[imadeanaccounttoseepics]

^ Done!

[phetto]

Black tkl with white stitching. Sign me up or that


Sent from my iPhone using Tapatalk

[imadeanaccounttoseepics]

Black tkl with white stitching. Sign me up or that


Sent from my iPhone using Tapatalk

!

[Lorem-Ipsum]

Black 104 with blue stitching would be nice.

The price would have to be reasonable though as I can imagine shipping to the UK could cost a bit and customs may charge too.

[elton5354]

Black with gold stitching!

[imadeanaccounttoseepics]

Black with gold stitching!

Gold stitching!?

[elton5354]

Oh, I just saw the colour options for the stitches. Orange then!

[Sifo]

Oh, I just saw the colour options for the stitches. Orange then!

Geekhack colors!

[imadeanaccounttoseepics]

Hopefully OP comes back with some great pricing on the wrist pads!
I'm strapped on money especially since this will be an impulsive buy!

[Alessandro]

I'm still in for a black with white stitching as it looks so awesome in the prototype. We'll have to see what shipping and price to the UK will be though.

[imadeanaccounttoseepics]

I'm still in for a black with white stitching as it looks so awesome in the prototype. We'll have to see what shipping and price to the UK will be though.

Yeah you're on the list already.
As for the price I'm sure everyone here Is waiting for the exact price to know If they want to make the purchase 100% or not..

[MechKey]

I'm interested if it is real leather.

[danielucf]

If we get a price tier we will be ready for the group buy. There are always people that will buy no matter what the price, especially if it has geekhack on it.

[samwisekoi]

Oh, I just saw the colour options for the stitches. Orange then!

Geekhack colors!

Brain flash just to annoy the OP:

Orange on Charcoal to match the OCKC GB!  That would look sweet!

(Apologies for my poor Photoshop skills.)

 - Ron | samwisekoi

[imadeanaccounttoseepics]

If we get a price tier we will be ready for the group buy. There are always people that will buy no matter what the price, especially if it has geekhack on it.

Yeah some people are just to loyal to Geek Hack!
A price tier would be nice.

[Sinzz]

would be interested in a Black with Orange stitches version if the price is right.

[imadeanaccounttoseepics]

would be interested in a Black with Orange stitches version if the price is right.

Done, I'm guessing full size?

[prava]

I don't understand this:

Material for the wrist rest will be synthetic leather.

    Genuine Leather is available for Black color only.

Does it mean that there is genuine leather available (but only in black colour) or you can only choose the "non-genuine" leather from any of the colours mentioned?

[Elrick]

Yeah some people are just to loyal to Geek Hack!

So, why are you here then?

Loyalty has nothing to do with it.  He chose Orange and Charcoal because it's a good colour match and it roughly resembles this Forum's Logo.... go figure.  There is still negative feedback from other's here about this choice.  Believe it or not, you still have some here who hate this place........

If he wants to put the name "Geekhack" onto the wrist rests then he should look at giving some money over to mkawa as a measure of thanks for using the name on a product.  It's only fair.

[samwisekoi]

If he wants to put the name "Geekhack" onto the wrist rests then he should look at giving some money over to mkawa as a measure of thanks for using the name on a product.  It's only fair.

Yes! That is an excellent idea.

Um, I mean I would gladly support such an approach.

 - Ron | samwisekoi

[quake4mhg]

TKL black with black stitching.

[imadeanaccounttoseepics]

Yeah some people are just to loyal to Geek Hack!

So, why are you here then?

Wow wow, Did I say something offensive or something?

Loyalty has nothing to do with it.  He chose Orange and Charcoal because it's a good colour match and it roughly resembles this Forum's Logo.... go figure.  There is still negative feedback from other's here about this choice.  Believe it or not, you still have some here who hate this place........

If he wants to put the name "Geekhack" onto the wrist rests then he should look at giving some money over to mkawa as a measure of thanks for using the name on a product.  It's only fair.

[imadeanaccounttoseepics]

TKL black with black stitching.

Done!

[poopmat]

interested in black tkl with red stitching

[fuzzyx3000]

I'd be interested in black tkl with white stiching.

[imadeanaccounttoseepics]

Done.

[Sinzz]

I'm sorry, I forgot to mention TKL!

[MarkPharaoh]

Nice, 1 TKL black with orange stitching.

[mehkat1974]

No love for the poker ??    <<ediit nvm I see some in the list, lez do diss
I will be all over this if you make a Poker/HHKB size one, because there is no such thing available any where that I have seen
... and also most likely in for a TKL if the Poker size is a no go
No idea on colour right now though

edit: black leather, orange stitch, 60%

[mickd]

I would probably be in for a black full sized genuine leather rest with white stitches

[singaporean123]

so how much are these exactly?

[OrangeJewce]

Waiting for OP to get quote from manufacturer...

Cheers,

[imadeanaccounttoseepics]

Done!

[Marclgw]

Please give me sometime to get back asap. Will list out a list of price once available.

As for prototype i will see what i can do. Perhaps i can mail a piece to one representative that you guys trust for a review in advance before the official group buy.

[imadeanaccounttoseepics]

Please give me sometime to get back asap. Will list out a list of price once available.

As for prototype i will see what i can do. Perhaps i can mail a piece to one representative that you guys trust for a review in advance before the official group buy.

Hopefully It doesn't take long !

[oneproduct]

Interested in 60%, black leather with white stitching. Color isn't too important though, I'm flexible.

[imadeanaccounttoseepics]

I made this for fun.
https://docs.google.com/spreadsheet/ccc?key=0AmJnoAaokKYxdEVkdDNoQ19pMmdneHMwaEIxQzdtX2c

I have a question..
Not really related to this thread BUT It might serve a purpose..

(Small box that's about half a pound In weight)
USPS First Class International Mail $4-5 ($7'ish with Insurance + Tracking)
USPS Priority Mail (International) $12.99 ($14.50'ish with Insurance + Tracking)

My pricing above MIGHT be wrong so correct me If I'm wrong, So which Is the better route to take? 
I find that USPS First Class Is just as fast as Priority? In regards to me receiving something shipped via First Class Is 1.5-2 weeks and Priority Mail says It's 6-10 business days according to the site Is basically 1-2 weeks also.

Thanks
Thanks!

[Marclgw]

The initial packaging for these wrist rest used are barter paper, which do not look as glam , currently i am getting them to make cardboard boxes to fit this wrist rest which will be more protective and looks better when everyone receives it, will only cost likely cents to make one.

[imadeanaccounttoseepics]

The initial packaging for these wrist rest used are barter paper, which do not look as glam , currently i am getting them to make cardboard boxes to fit this wrist rest which will be more protective and looks better when everyone receives it, will only cost likely cents to make one.

We need a price before they prepare production/shipment first!

[phetto]

Just to make things clear, can one choose between the gh forum logo and the logo that is on the metal keycap?
I dont want the logo that is on the forum, I want the one that is on the keycap.

[mickd]

Personally I prefer the one on the metal keycap too, if we're here to voice our opinion

[Amarok]

Personally I prefer the one on the metal keycap too, if we're here to voice our opinion

Agreed, if we have a choice I like the metal logo better.

Sent from my Nexus 7 using Tapatalk 2

[Marclgw]

Decided to stick with the fonts on the keycaps, post #1 updated.

Can anyone decide the dimension of how huge the logo should be?

Also, i would need someone to mock up a clear image of that font to be submitted to moulding factory.

[Marclgw]

Updates on Post #1

[dirge]

tkl  White, Orange stitching
60% black grey stitching

both no logo and uk shipping great group buy!

[imadeanaccounttoseepics]

Marc Is that the final pricing? More expensive then I thought to be honest.

[elton5354]

Marc Is that the final pricing? More expensive then I thought to be honest.

We can always split the shipping cost And you're getting real leather I guess?

Also, no 60%?!

[imadeanaccounttoseepics]

Marc Is that the final pricing? More expensive then I thought to be honest.

We can always split the shipping cost And you're getting real leather I guess?

Also, no 60%?!

True although Myv / balance Is In this GB too!
Split 4 way!?

[imadeanaccounttoseepics]

Another question.. When Is the group buy actually closing because we have the prices now right? Would be hard to know If everyone Is still interested or not, Lol.

[mickd]

What's the inside filled with? I've never had a leather style wrist rest before so I'm just wondering how they normally feel. Is it like that gel silicone like stuff inside?

[Marclgw]

The wrist rest is foam based instead of gel based.
As I am superb busy with some other case I have at work , will start the official group buy in 5 days

[elton5354]

So can you confirm that 60% wrist rest is officially out of this group buy?

[Marclgw]

Will finalise everything when I start up the official group buy thread, I will negotiate for a better price. Also, I need the dimension of the wrist rest for 60% size. Factory ain't know the dimension unless provided.

I will need someone to mock up the geekhack fonts as well into JPG or .doc for them to process.

Volunteer for the distribution of wrist rest in CONUS/Eu.

Without the above the group buy will be delayed.

[elton5354]

11.5 inches wide for a Poker.

[Halverson]

For dimensions would it be the same but length made for a poker? I think there should be measurements for that someone has on hand. edit^guess so

As for Canadian buyers, will they be shipped direct or do we need a Canadian distributor as well?

[imadeanaccounttoseepics]

For dimensions would it be the same but length made for a poker? I think there should be measurements for that someone has on hand. edit^guess so

As for Canadian buyers, will they be shipped direct or do we need a Canadian distributor as well?

That would be hard to manage, A Canada/EU package handler.

[Marclgw]

I was thinking for the US handler to ship anything beyond Asia, eu, canada , uk etc.

[imadeanaccounttoseepics]

I was thinking for the US handler to ship anything beyond Asia, eu, canada , uk etc.

That would probably be best.
What's CONUS/EU?

[maui]

I'm interested!

 TKL - black - red / orange stitching

[Elrick]

For dimensions would it be the same but length made for a poker? I think there should be measurements for that someone has on hand. edit^guess so

As for Canadian buyers, will they be shipped direct or do we need a Canadian distributor as well?

I just bought a whole keyboard from a certified Canadian Seller off Ebay and he charged me only $15.00USD, hence I'm starting to love Canadians AGAIN.

[Carefoot]

For dimensions would it be the same but length made for a poker? I think there should be measurements for that someone has on hand. edit^guess so

As for Canadian buyers, will they be shipped direct or do we need a Canadian distributor as well?

I just bought a whole keyboard from a certified Canadian Seller off Ebay and he charged me only $15.00USD, hence I'm starting to love Canadians AGAIN.

Canada knows how to eBay mang.

[imadeanaccounttoseepics]

For dimensions would it be the same but length made for a poker? I think there should be measurements for that someone has on hand. edit^guess so

As for Canadian buyers, will they be shipped direct or do we need a Canadian distributor as well?

I just bought a whole keyboard from a certified Canadian Seller off Ebay and he charged me only $15.00USD, hence I'm starting to love Canadians AGAIN.

What keyboard?

[IPT]

not like its a super big deal to me, but is any portion of this GB/sale going back to GH?
you are using the logo/name, i know it was mentioned a few pages back, dunno if there was an answer.

[imadeanaccounttoseepics]

not like its a super big deal to me, but is any portion of this GB/sale going back to GH?
you are using the logo/name, i know it was mentioned a few pages back, dunno if there was an answer.

I think the "giving back" part Is that It's mandatory to get the logo stamped on all the wrist pads In honor of geek hack!

[IPT]

not like its a super big deal to me, but is any portion of this GB/sale going back to GH?
you are using the logo/name, i know it was mentioned a few pages back, dunno if there was an answer.

I think the "giving back" part Is that It's mandatory to get the logo stamped on all the wrist pads In honor of geek hack!

one can say its profiting off the geekhack name.
Obviously for us GH'ers, we feel a special tie with Geekhack merchandise/branding (GH caps for example)
I do know previously people have asked iMav for permission to use GH, as a courtesy i guess.

[n00bca3k]

Interested in a genuine leather TKL Threading preference would be black, white, blue, orange, red, in order.

[imadeanaccounttoseepics]

Interested in a genuine leather TKL Threading preference would be black, white, blue, orange, red, in order.

This Is the interest check.. Official group buy thread will be started so I think so make sure you post your order there!

[n00bca3k]

Interested in a genuine leather TKL Threading preference would be black, white, blue, orange, red, in order.

This Is the interest check.. Official group buy thread will be started so I think so make sure you post your order there!

I know, I was expressing interest!

[esoomenona]

No pink? What is this?

[Sifo]

No pink? What is this?

Yeah, right?

[reaper]

The order thread is up.  Please go here to place your orders.  Thanks! =)