NEW USERS, READ THIS!
0 Members and 1 Guest are viewing this topic.
Hi guys,I was busy last weekend sorting the screws and counter sinking the TOP/BOTTOM. Yes I digged thousand of hole. Tomorrow I would get all the stuff on hand and ship all by Thursday.I was hopping this would be a X-MAS present for you but sorry about one week delay.Now I am hopping this would be a NEW YEAR celebration. Thank you for waiting.
Quote from: leeku on Mon, 21 December 2015, 20:30:13Hi guys,I was busy last weekend sorting the screws and counter sinking the TOP/BOTTOM. Yes I digged thousand of hole. Tomorrow I would get all the stuff on hand and ship all by Thursday.I was hopping this would be a X-MAS present for you but sorry about one week delay.Now I am hopping this would be a NEW YEAR celebration. Thank you for waiting. Hey guys,I am very sorry about saying that I could not ship today(12/24), it's X-mas season. I WILL ship them all on next Monday(12/28). -Leeku-
Hey guys,I am very sorry about saying that I could not ship today(12/24), it's X-mas season. I WILL ship them all on next Monday(12/28). -Leeku-
Quote from: leeku on Wed, 23 December 2015, 19:52:26Quote from: leeku on Mon, 21 December 2015, 20:30:13Hi guys,I was busy last weekend sorting the screws and counter sinking the TOP/BOTTOM. Yes I digged thousand of hole. Tomorrow I would get all the stuff on hand and ship all by Thursday.I was hopping this would be a X-MAS present for you but sorry about one week delay.Now I am hopping this would be a NEW YEAR celebration. Thank you for waiting. Hey guys,I am very sorry about saying that I could not ship today(12/24), it's X-mas season. I WILL ship them all on next Monday(12/28). -Leeku- when you say all are you also referring to the assembled ones? Please enjoy Christmas and New Years
Quote from: ccarlitos2 on Wed, 23 December 2015, 21:50:47Quote from: leeku on Wed, 23 December 2015, 19:52:26Quote from: leeku on Mon, 21 December 2015, 20:30:13Hi guys,I was busy last weekend sorting the screws and counter sinking the TOP/BOTTOM. Yes I digged thousand of hole. Tomorrow I would get all the stuff on hand and ship all by Thursday.I was hopping this would be a X-MAS present for you but sorry about one week delay.Now I am hopping this would be a NEW YEAR celebration. Thank you for waiting. Hey guys,I am very sorry about saying that I could not ship today(12/24), it's X-mas season. I WILL ship them all on next Monday(12/28). -Leeku- when you say all are you also referring to the assembled ones? Please enjoy Christmas and New Years It's not. Sorry. i will try to ship the assemled ASAP.
Quote from: leeku on Wed, 23 December 2015, 19:52:26Quote from: leeku on Mon, 21 December 2015, 20:30:13Hi guys,I was busy last weekend sorting the screws and counter sinking the TOP/BOTTOM. Yes I digged thousand of hole. Tomorrow I would get all the stuff on hand and ship all by Thursday.I was hopping this would be a X-MAS present for you but sorry about one week delay.Now I am hopping this would be a NEW YEAR celebration. Thank you for waiting. Hey guys,I am very sorry about saying that I could not ship today(12/24), it's X-mas season. I WILL ship them all on next Monday(12/28). -Leeku- Its ok, im hopping my board assembled and can ship next Monday Merry X-mas u guys
A fast group buy! I can't believe this is even possible. I read about the compact 1800 keyboard not long ago, and now it is even shipping?
Can anyone confirm the board in the pic in the OP has 98 switches? I have a bag of 100 Zealios so if I've counted that right my ISO build will need every one of them. If I can't count after a handful of beers I might be a couple short, and that would just be annoying
Quote from: suicidal_orange on Sat, 26 December 2015, 13:20:19Can anyone confirm the board in the pic in the OP has 98 switches? I have a bag of 100 Zealios so if I've counted that right my ISO build will need every one of them. If I can't count after a handful of beers I might be a couple short, and that would just be annoying For a standard layout there are 98 keys. Enjoy
[12/30]Update !!!ALL SHIPPED at 12/29!! except assembly asked, and ISO user(suicidal_orange).suicidal_orange : I realized the they missed a ISO plate. sorry I will ship yours ASAP.assembly : please give me 1~2 weeks. This is not a job but like a hobby actually... sorry.Happy New Year! and I'll post second SQ series in couple of dates, 75SK.
I have a bag of 100 Zealios so if I've counted that right my ISO build will need every one of them.
Quote from: suicidal_orange on Sat, 26 December 2015, 13:20:19 I have a bag of 100 Zealios so if I've counted that right my ISO build will need every one of them.I always buy a few extra switches just in case. Taking into account the excessive chattering that seems to occur with many Zealios I'd look into ordering some more if I were you.
Quote from: building_an_ergo on Thu, 31 December 2015, 08:37:51Quote from: suicidal_orange on Sat, 26 December 2015, 13:20:19 I have a bag of 100 Zealios so if I've counted that right my ISO build will need every one of them.I always buy a few extra switches just in case. Taking into account the excessive chattering that seems to occur with many Zealios I'd look into ordering some more if I were you.I wasn't intending to build a full size when I bought the Zealios, was thinking they would go on the alphas of a 60% and my JD40 but this was too shiny! I also have 20 linears so if some do turn out bad (non removable switch tops ) I can swap them in, but most importantly I have 100 purple stems so all good
Look what arrived today!Show Image
Woah nice being so close to Korea! Build that baby!
Quote from: alienman82 on Fri, 01 January 2016, 21:58:27Woah nice being so close to Korea! Build that baby!Airflow sucks here.Really need to get some sort of fan before I do.So tomorrow of the day after.
Quote from: building_an_ergo on Fri, 01 January 2016, 21:38:34Look what arrived today!Show ImageOh a white PCB what an nice unexpected surprise!
I am actually a little confused when it comes to assembly, the stabalizers especially.I assumed they are mounted first, and then the plate is? Doing this leaves a littel space between the plate and the PCB. This is normal correct? The switches themselves leave a little space between PCB and Plate when locked it.Image:Show ImageThis is correct, right? The plate will go over, I will solder every switch in, then I close it up in the case, right?
So like this?Show ImageWith a small space between plate and PCB like this?Show ImageSorry for asking so many questions, but this is kinda different from my last build and I'd hate to have to desolder everything after I finish.
Quote from: building_an_ergo on Sat, 02 January 2016, 00:04:01So like this?Show ImageWith a small space between plate and PCB like this?Show ImageSorry for asking so many questions, but this is kinda different from my last build and I'd hate to have to desolder everything after I finish.Yeap that's how you do, just always make sure to do a last minute check that all switches are level and snapped in corrrectly before you start soldering. I made that mistake once...
Yeap that's how you do, just always make sure to do a last minute check that all switches are level and snapped in corrrectly before you start soldering. I made that mistake once...
now i cant wait for mine too arrive nice build with green switch
Quote from: Steezus on Sat, 02 January 2016, 00:06:06Yeap that's how you do, just always make sure to do a last minute check that all switches are level and snapped in corrrectly before you start soldering. I made that mistake once... Thank you for the assistance.Here it is with all switches snapped in. Gonna have to take another look at that bottom row, not sure about spacing. And I am still on the fence about that split spacebar. I want it, but getting keycaps for it will be hell.Show ImageAnyway, I will solder it and probably be done this time tomorrow (if I don't run out of solder, only got one small spindle :D).Quote from: gadzkun on Sat, 02 January 2016, 00:20:07now i cant wait for mine too arrive :pnice build with green switch :thumb: :thumb: :thumb: :thumb: :thumb:I absolutely love greens. I was considering getting some gateron blues and switching springs since they are so highly praised, but it ended up being way to expensive to get them here.
now i cant wait for mine too arrive :pnice build with green switch :thumb: :thumb: :thumb: :thumb: :thumb:
Quote from: Steezus on Sat, 02 January 2016, 00:06:06Yeap that's how you do, just always make sure to do a last minute check that all switches are level and snapped in corrrectly before you start soldering. I made that mistake once... Thank you for the assistance.Here it is with all switches snapped in. Gonna have to take another look at that bottom row, not sure about spacing. And I am still on the fence about that split spacebar. I want it, but getting keycaps for it will be hell.Show ImageAnyway, I will solder it and probably be done this time tomorrow (if I don't run out of solder, only got one small spindle :D).
Quote from: building_an_ergo on Sat, 02 January 2016, 00:27:47Quote from: Steezus on Sat, 02 January 2016, 00:06:06Yeap that's how you do, just always make sure to do a last minute check that all switches are level and snapped in corrrectly before you start soldering. I made that mistake once... Thank you for the assistance.Here it is with all switches snapped in. Gonna have to take another look at that bottom row, not sure about spacing. And I am still on the fence about that split spacebar. I want it, but getting keycaps for it will be hell.Show ImageAnyway, I will solder it and probably be done this time tomorrow (if I don't run out of solder, only got one small spindle :D).Quote from: gadzkun on Sat, 02 January 2016, 00:20:07now i cant wait for mine too arrive :pnice build with green switch :thumb: :thumb: :thumb: :thumb: :thumb:I absolutely love greens. I was considering getting some gateron blues and switching springs since they are so highly praised, but it ended up being way to expensive to get them here.I'm both simultaneously loving and hating your update pics. Looks great, but I want mine NOW dammit :p
Quote from: Steezus on Sat, 02 January 2016, 00:06:06Quote from: building_an_ergo on Sat, 02 January 2016, 00:04:01So like this?Show ImageWith a small space between plate and PCB like this?Show ImageSorry for asking so many questions, but this is kinda different from my last build and I'd hate to have to desolder everything after I finish.Yeap that's how you do, just always make sure to do a last minute check that all switches are level and snapped in corrrectly before you start soldering. I made that mistake once... Can i open the top of switches after switches soldered?
Can i open the top of switches after switches soldered?
