Author Topic: [GB] Phantom Parts and Assembly Services (Update Posted 2018/07/23) (Read 302549 times)

csimi · « **Reply #250 on:** Tue, 15 January 2013, 03:08:50 »

Yeah, one stem/spring swap assembly and the PLU pcb/plate/remaining parts also sent in pieces.

TheProfosist · « **Reply #251 on:** Tue, 15 January 2013, 03:16:45 »

Quote from: gameaholic on Tue, 15 January 2013, 03:02:47

I'm going for a black case with lubed red switches costar stabilizers and the same layout as my filco TKL.

Some questions before I fill out the form.

1. About the plates. I already ordered 2 of WFD's universal plates (1 to go in this and one for my filco) and he is doing my assembly so I should already be good and not need any of the other plates right?

2. If I order the black PLU 87 with Red Switches that covers the case and switches then I just need to order a few extra red switches in case they are bad.
(I will also be ordering some clear switches to go in my GH60-how many of those will I need?).

3. No purple or white LEDs?

if he is doing your assembly and is one of the builders in this GB select the type of assembly that you want and leave his name in the notes so that the needed parts get shipped to him. No you shouldnt need any other plates.

yes a few extra would be good also dont forget stabilizers i recommended cherry with the mod

white is what comes with the phantom and no no purple those are usually UV

TheProfosist · « **Reply #252 on:** Tue, 15 January 2013, 03:17:31 »

Quote from: csimi on Tue, 15 January 2013, 03:08:50

Yeah, one stem/spring swap assembly and the PLU pcb/plate/remaining parts also sent in pieces.

alright ill modify your order for you

edit: modified

Matt3o · « **Reply #253 on:** Tue, 15 January 2013, 03:28:05 »

sorry if I missed something, but are these the plates from the IC http://geekhack.org/index.php?topic=38623.0 ?

TheProfosist · « **Reply #254 on:** Tue, 15 January 2013, 03:29:00 »

Quote from: Matt3o on Tue, 15 January 2013, 03:28:05

sorry if I missed something, but are these the plates from the IC http://geekhack.org/index.php?topic=38623.0 ?

yep theres a note way at the bottom of the OP sorry it doesnt stick out more

Matt3o · « **Reply #255 on:** Tue, 15 January 2013, 03:33:32 »

you are right, sorry dude, didn't notice the notes were updated.

TheProfosist · « **Reply #256 on:** Tue, 15 January 2013, 03:34:43 »

Quote from: Matt3o on Tue, 15 January 2013, 03:33:32

you are right, sorry dude, didn't notice the notes were updated.

not a problem their not very noticeable lol

Matt3o · « **Reply #257 on:** Tue, 15 January 2013, 03:45:04 »

still undecided if I should get a full PLU or just the plate...

BimboBB · « **Reply #258 on:** Tue, 15 January 2013, 03:46:23 »

form filled for parts only order. (but had to mark all the other stuff with zero)

kmiller8 · « **Reply #259 on:** Tue, 15 January 2013, 03:50:58 »

Quote from: BimboBB on Tue, 15 January 2013, 03:46:23

form filled for parts only order. (but had to mark all the other stuff with zero)

^this

That's reallllly annoying.

TheProfosist · « **Reply #260 on:** Tue, 15 January 2013, 03:55:36 »

Quote from: kmiller8 on Tue, 15 January 2013, 03:50:58

Quote from: BimboBB on Tue, 15 January 2013, 03:46:23
form filled for parts only order. (but had to mark all the other stuff with zero)

^this

That's reallllly annoying.

sorry but i set i up that way purposefully so hopefully having to mark 0 would force you to really look over what your ordering and not miss anything.

TheProfosist · « **Reply #261 on:** Tue, 15 January 2013, 04:12:39 »

topic updated

Amr0d · « **Reply #262 on:** Tue, 15 January 2013, 04:57:43 »

Can we get Purple LED?

Dgsbllx · « **Reply #263 on:** Tue, 15 January 2013, 05:11:34 »

Are LEDs actually needed at all?

TheProfosist · « **Reply #264 on:** Tue, 15 January 2013, 05:13:03 »

dont forget if you guys are looking for a nice custom cable for your phantom get in touch with MiMiC also check out his thread here.

TheProfosist · « **Reply #265 on:** Tue, 15 January 2013, 05:13:43 »

Quote from: Dgsbllx on Tue, 15 January 2013, 05:11:34

Are LEDs actually needed at all?

no, you get white ones in the kit the ones i offer are if you want a different color.

okooko · « **Reply #266 on:** Tue, 15 January 2013, 05:16:26 »

Form submitted, thanks for the clarifications.

Dgsbllx · « **Reply #267 on:** Tue, 15 January 2013, 05:18:40 »

Quote from: TheProfosist on Tue, 15 January 2013, 05:13:43

Quote from: Dgsbllx on Tue, 15 January 2013, 05:11:34
Are LEDs actually needed at all?
no, you get white ones in the kit the ones i offer are if you want a different color.

So I don't even need the white ones on either?
Cheers for quick response

TheProfosist · « **Reply #268 on:** Tue, 15 January 2013, 05:25:57 »

Quote from: okooko on Tue, 15 January 2013, 05:16:26

Form submitted, thanks for the clarifications.

yep no problem, and yes its fine we can ship it to you built without a case.

TheProfosist · « **Reply #269 on:** Tue, 15 January 2013, 05:30:48 »

also as a note if anyone is planing on ergo clears youll need select at least the stem or spring swap service and buy clears, along with either providing me with springs or buying another type of switch for the springs. This is only if you are have me build ergo clears and remember all extra parts will be returned to you with your phantom.

Matt3o · « **Reply #270 on:** Tue, 15 January 2013, 05:51:01 »

okay took a plate, if I get it right it will be SS, but ALU is also good for me

TheProfosist · « **Reply #271 on:** Tue, 15 January 2013, 06:08:13 »

Quote from: Matt3o on Tue, 15 January 2013, 05:51:01

okay took a plate, if I get it right it will be SS, but ALU is also good for me

yes plates are made of stainless

Gupgup · « **Reply #272 on:** Tue, 15 January 2013, 07:35:11 »

Form filled, can't wait!

FabsSpeed · « **Reply #273 on:** Tue, 15 January 2013, 07:38:06 »

Sent me order for the two Phantoms! Thank you very much for the great support Prof:)

agor · « **Reply #274 on:** Tue, 15 January 2013, 08:41:40 »

Order sent, thanks

mashby · « **Reply #275 on:** Tue, 15 January 2013, 09:14:45 »

Form filled.

Leewei · « **Reply #276 on:** Tue, 15 January 2013, 09:52:28 »

Form filled. Thanks =)

longweight · « **Reply #277 on:** Tue, 15 January 2013, 14:05:22 »

So are the LEDs for all of the caps? Per set?

TheProfosist · « **Reply #278 on:** Tue, 15 January 2013, 15:09:44 »

Quote from: longweight on Tue, 15 January 2013, 14:05:22

So are the LEDs for all of the caps? Per set?

nope there only 2 leds on the board the price for the leds will be adjusted later today hopefullly when i have time to price out the leds and resistors

nebo · « **Reply #279 on:** Tue, 15 January 2013, 15:22:59 »

I have a question, how are you planning on modifying the PLU case for the 7bit num block? Might end up wanting to get one seeing as cases are still probably a few months out...

TheProfosist · « **Reply #280 on:** Tue, 15 January 2013, 15:30:01 »

Quote from: nebo on Tue, 15 January 2013, 15:22:59

I have a question, how are you planning on modifying the PLU case for the 7bit num block? Might end up wanting to get one seeing as cases are still probably a few months out...

using my skill and a dremel, the same way that I did mine, their not perfect those were also my first attempts at it but I will make it look as clean as possible

Acetrak · « **Reply #281 on:** Tue, 15 January 2013, 15:32:23 »

TheProfosist is gonna karate chop them

Binge · « **Reply #282 on:** Tue, 15 January 2013, 15:44:24 »

submitted my order. Interested to use a prof-layout for a full day of work.

nebo · « **Reply #283 on:** Tue, 15 January 2013, 16:02:21 »

I think I'll wait until the 20th (this closes the 21st right?) until I change my order to get a case as well in case something comes up.

AKIMbO · « **Reply #284 on:** Tue, 15 January 2013, 16:03:10 »

How are we doing on switches Prof? Anywhere near 1000 yet?

metalliqaz · « **Reply #285 on:** Tue, 15 January 2013, 17:08:17 »

Well I'm about to order at least 180 more.. gonna be building a lot more than a Phantom!

TheProfosist · « **Reply #286 on:** Tue, 15 January 2013, 17:15:41 »

Quote from: nebo on Tue, 15 January 2013, 16:02:21

I think I'll wait until the 20th (this closes the 21st right?) until I change my order to get a case as well in case something comes up.

sounds fine to me just maksure you get your order in before the loose deadline

TheProfosist · « **Reply #287 on:** Tue, 15 January 2013, 17:15:56 »

Quote from: AKIMbO on Tue, 15 January 2013, 16:03:10

How are we doing on switches Prof? Anywhere near 1000 yet?

clears alone are well over the 1000

nebo · « **Reply #288 on:** Tue, 15 January 2013, 17:19:17 »

Quote from: TheProfosist on Tue, 15 January 2013, 17:15:41

Quote from: nebo on Tue, 15 January 2013, 16:02:21
I think I'll wait until the 20th (this closes the 21st right?) until I change my order to get a case as well in case something comes up.
sounds fine to me just maksure you get your order in before the loose deadline

Already got it in just to be safe. Worst case I have to use my super duper dremel skills on a case I get from classifieds.

TheProfosist · « **Reply #289 on:** Tue, 15 January 2013, 18:39:30 »

ok an update on switches (the OP and form will be updated shortly):

there will be more switch types coming (still no blacks). green and grey were added.

white's and dark grey's price has to be raised $0.05 a switch

and i was informed that there are now limited stocks on hand for switches and any switches order over those amounts would be back ordered ~2 months

sorry to bring the semi disheartening news but I dont have much control over this, for those who dont want to wait but are over the limited amount of instock switches i could look into getting some from mouser or like likes but the pricing even at 500 switches is much higher. Also if you ordered switches before this announcement and would like to cancel because of it please send me a pm.

TheProfosist · « **Reply #290 on:** Tue, 15 January 2013, 18:46:03 »

here is the updated switch list

Code: [Select]

$0.60 - MXBLUE     (MX1A-E1NN)
$0.60 - MXBROWN     (MX1A-G1NN)
$0.60 - MXRED     (MX1A-L1NN)
$0.60 - MXCLEAR     (MX1A-C1NN)
$0.85 - MXGREEN     (MX1A-F1NN)
$0.65 - MXWHITE     (MX1A-A1NN)
$0.85 - MXGREY     (MX1A-D1NN)
$0.85 - MXDARKGREY     (MX1A-21NN)

nebo · « **Reply #291 on:** Tue, 15 January 2013, 18:46:54 »

An extra $5 for white switches? Worth it.

AKIMbO · « **Reply #292 on:** Tue, 15 January 2013, 18:56:51 »

Quote from: nebo on Tue, 15 January 2013, 18:46:54

An extra $5 for white switches? Worth it.

Heck yes it is.

TheProfosist · « **Reply #293 on:** Tue, 15 January 2013, 19:09:02 »

MXWHITE now on backorder

TheProfosist · « **Reply #294 on:** Tue, 15 January 2013, 19:12:30 »

OP and Form now fully up to date!

AKIMbO · « **Reply #295 on:** Tue, 15 January 2013, 19:13:46 »

Quote from: TheProfosist on Tue, 15 January 2013, 19:09:02

MXWHITE now on backorder

Nooo!!!1

nebo · « **Reply #296 on:** Tue, 15 January 2013, 19:21:55 »

Quote from: TheProfosist on Tue, 15 January 2013, 19:09:02

MXWHITE now on backorder

Does it affect you if the order was already in?

TheProfosist · « **Reply #297 on:** Tue, 15 January 2013, 19:26:56 »

Quote from: AKIMbO on Tue, 15 January 2013, 19:13:46

Quote from: TheProfosist on Tue, 15 January 2013, 19:09:02
MXWHITE now on backorder

Nooo!!!1

Quote from: nebo on Tue, 15 January 2013, 19:21:55

Quote from: TheProfosist on Tue, 15 January 2013, 19:09:02
MXWHITE now on backorder
Does it affect you if the order was already in?

dont worry you two and everyone that ordered before I announced they were on back order got there orders in for instock switches

AKIMbO · « **Reply #298 on:** Tue, 15 January 2013, 19:30:31 »

Quote from: TheProfosist on Tue, 15 January 2013, 19:26:56

Quote from: AKIMbO on Tue, 15 January 2013, 19:13:46
Quote from: TheProfosist on Tue, 15 January 2013, 19:09:02
MXWHITE now on backorder

Nooo!!!1

Quote from: nebo on Tue, 15 January 2013, 19:21:55
Quote from: TheProfosist on Tue, 15 January 2013, 19:09:02
MXWHITE now on backorder
Does it affect you if the order was already in?

dont worry you two and everyone that ordered before I announced they were on back order got there orders in for instock switches

gameaholic · « **Reply #299 on:** Tue, 15 January 2013, 20:30:22 »

Quote from: TheProfosist on Tue, 15 January 2013, 03:16:45

Quote from: gameaholic on Tue, 15 January 2013, 03:02:47
I'm going for a black case with lubed red switches costar stabilizers and the same layout as my filco TKL.

Some questions before I fill out the form.

1. About the plates. I already ordered 2 of WFD's universal plates (1 to go in this and one for my filco) and he is doing my assembly so I should already be good and not need any of the other plates right?

2. If I order the black PLU 87 with Red Switches that covers the case and switches then I just need to order a few extra red switches in case they are bad.
(I will also be ordering some clear switches to go in my GH60-how many of those will I need?).

3. No purple or white LEDs?

if he is doing your assembly and is one of the builders in this GB select the type of assembly that you want and leave his name in the notes so that the needed parts get shipped to him. No you shouldnt need any other plates.

yes a few extra would be good also dont forget stabilizers i recommended cherry with the mod

white is what comes with the phantom and no no purple those are usually UV

Form Filled. I've never tried cherry stabilizers. Gonna trust you on this one.

News:

Author Topic: [GB] Phantom Parts and Assembly Services (Update Posted 2018/07/23) (Read 302549 times)