Author Topic: [Order] TX60/TX65/TX84se [Finished]  (Read 239472 times)

0 Members and 1 Guest are viewing this topic.

Offline Oblotzky

  • Posts: 2049
  • Location: Cologne, Germany
  • Backspace is for people that make mistakes.
Re: [Order] TX60/TX65/TX84se
« Reply #950 on: Tue, 12 March 2019, 11:44:35 »
The reason why refund is taking a bit too long because Fedex is dumb and takes forever to bill me. I still haven’t received the bill from packages I shipped on March 1st...

Thanks for the reply, but this was directed at the EU portion since that's where I'm from and Wodan seems to be done with the keyboard kits so Kin should now know what the EU boards ended up costing for shipping. I'll wait a week before I'll bug again  :p

Offline Hutch

  • Posts: 12
Re: [Order] TX60/TX65/TX84se
« Reply #951 on: Tue, 12 March 2019, 13:44:50 »
Is there a timeline on the TX108se from the extra pre-order form? Ordered at end of January.

I also ordered a TX108SE end of January and, like bengine, got an email/google form from kin this morning about how it should be shipped.

Thanks! I totally missed the email/google from from kin yesterday morning. Filled it out.

Offline appaboy

  • Posts: 197
Re: [Order] TX60/TX65/TX84se
« Reply #952 on: Thu, 14 March 2019, 17:55:44 »
Got my antique board in the mail today. Thanks Popkorn62
PC Singa, MIR80, TX84se, g80-3314, g80-0427, g80-5000 + 5700, G80-3700, g81-3000 HBU (og wob)

HASRO keycaps
OG POM keycaps
SAI OG Italian dyesubs
Scarface Fn blank

Offline appaboy

  • Posts: 197
Re: [Order] TX60/TX65/TX84se
« Reply #953 on: Fri, 15 March 2019, 00:31:53 »
215295-0
215297-1

Vint Browns and og dyesubs fit this board well.
PC Singa, MIR80, TX84se, g80-3314, g80-0427, g80-5000 + 5700, G80-3700, g81-3000 HBU (og wob)

HASRO keycaps
OG POM keycaps
SAI OG Italian dyesubs
Scarface Fn blank

Offline popkorn62

  • Posts: 602
  • Location: California
  • No keyboards for old men
    • Mekibo
Re: [Order] TX60/TX65/TX84se
« Reply #954 on: Fri, 15 March 2019, 01:05:16 »
(Attachment Link)
(Attachment Link)

Vint Browns and og dyesubs fit this board well.

Damn OG dyesub im jealous
==============
https://mekibo.com/

Offline pixelpusher

  • * Elevated Elder
  • Posts: 4179
  • Location: Tennessee - USA
Re: [Order] TX60/TX65/TX84se
« Reply #955 on: Fri, 15 March 2019, 15:58:02 »
Got my 84se antique today.  Thanks, sir.  Have to get some extra 7u stabilizers and build it out.

Offline Emir

  • icon mods
  • * Exquisite Elder
  • Posts: 1129
  • Location: Linköping, Sweden
  • Bandit
    • Discord
Re: [Order] TX60/TX65/TX84se
« Reply #956 on: Sat, 16 March 2019, 06:26:34 »
Thank you Wodan! Got my TX-CP brass and TX60 hhkb copper.

Honestly, the copper looks way better than I imagined. It plays on lighting really well, just tilting your head will change how it looks - very unique!


Only built tx60 so far, I love it.

Offline whalematrontron

  • Posts: 70
  • Location: Australia
Re: [Order] TX60/TX65/TX84se
« Reply #957 on: Sat, 16 March 2019, 06:32:51 »
Thank you Wodan! Got my TX-CP brass and TX60 hhkb copper.

Honestly, the copper looks way better than I imagined. It plays on lighting really well, just tilting your head will change how it looks - very unique!
Show Image


Only built tx60 so far, I love it.

That looks great! I love the finish on it

Offline appaboy

  • Posts: 197
Re: [Order] TX60/TX65/TX84se
« Reply #958 on: Sun, 17 March 2019, 17:08:01 »
Sorry if this has been asked a hundred times but is it normal that I still haven't gotten a refund for shipping? Worried...
PC Singa, MIR80, TX84se, g80-3314, g80-0427, g80-5000 + 5700, G80-3700, g81-3000 HBU (og wob)

HASRO keycaps
OG POM keycaps
SAI OG Italian dyesubs
Scarface Fn blank

Offline Emir

  • icon mods
  • * Exquisite Elder
  • Posts: 1129
  • Location: Linköping, Sweden
  • Bandit
    • Discord
Re: [Order] TX60/TX65/TX84se
« Reply #959 on: Sun, 17 March 2019, 17:26:32 »
Sorry if this has been asked a hundred times but is it normal that I still haven't gotten a refund for shipping? Worried...

I think so far only the Asian and Oceania customers have received refunds? EU and US still waiting, to my understanding. I for one have not received a refund yet, at least.

Offline Jedi

  • Posts: 512
  • Location: 702
Re: [Order] TX60/TX65/TX84se
« Reply #960 on: Sun, 17 March 2019, 18:14:24 »
Everyone needs to hold out until the proxies get final shipping invoices from the carriers.  If refunds went out before then and then the shipping bill comes in higher, the proxies would be out the money.  Plus the proxies are still shipping the orders and not all orders were received (US proxy noted that some of those items are still in transit).  I wouldn't worry yet about shipping credits until the orders are all sorted.  My two cents anyway.

Offline appaboy

  • Posts: 197
Re: [Order] TX60/TX65/TX84se
« Reply #961 on: Sun, 17 March 2019, 19:48:03 »
Everyone needs to hold out until the proxies get final shipping invoices from the carriers.  If refunds went out before then and then the shipping bill comes in higher, the proxies would be out the money.  Plus the proxies are still shipping the orders and not all orders were received (US proxy noted that some of those items are still in transit).  I wouldn't worry yet about shipping credits until the orders are all sorted.  My two cents anyway.

Yeah i get that and im fine with waiting, i was only worried because i thought i may be the only one still not getting it. sorry
PC Singa, MIR80, TX84se, g80-3314, g80-0427, g80-5000 + 5700, G80-3700, g81-3000 HBU (og wob)

HASRO keycaps
OG POM keycaps
SAI OG Italian dyesubs
Scarface Fn blank

Offline clik_clak

  • Posts: 423
Re: [Order] TX60/TX65/TX84se
« Reply #962 on: Mon, 18 March 2019, 10:19:39 »
Kin/Popkorn: Can we get some more info on the upcoming V2 sale that was put on the Korean blog? Are these going to be available to the US as well? Can we get some details on the boards themselves?

Offline Hutch

  • Posts: 12
Re: [Order] TX60/TX65/TX84se
« Reply #963 on: Mon, 18 March 2019, 11:22:18 »
Is there a timeline on the TX108se from the extra pre-order form? Ordered at end of January.

I also ordered a TX108SE end of January and, like bengine, got an email/google form from kin this morning about how it should be shipped.

Thanks! I totally missed the email/google from from kin yesterday morning. Filled it out.

@martink / others - did you receive an invoice for shipping after filling out the form? I haven't received yet.

Offline popkorn62

  • Posts: 602
  • Location: California
  • No keyboards for old men
    • Mekibo
Re: [Order] TX60/TX65/TX84se
« Reply #964 on: Mon, 18 March 2019, 12:16:01 »
Hi all,

I don’t know anything about refunding the shipping difference but Fedex *just* sent me the bill so I will populate the spreadsheets with actual costs for kin today or tomorrow.

I only know v2 will happen after April.
==============
https://mekibo.com/

Offline clik_clak

  • Posts: 423
Re: [Order] TX60/TX65/TX84se
« Reply #965 on: Mon, 18 March 2019, 12:24:16 »
Hi all,

I don’t know anything about refunding the shipping difference but Fedex *just* sent me the bill so I will populate the spreadsheets with actual costs for kin today or tomorrow.

I only know v2 will happen after April.

Ah, bummer. Kin's latest blog post said 3/28-4/8 for invoicing and shipping end of April-June. Must not be a US sale then.

Offline popkorn62

  • Posts: 602
  • Location: California
  • No keyboards for old men
    • Mekibo
Re: [Order] TX60/TX65/TX84se
« Reply #966 on: Mon, 18 March 2019, 13:09:18 »
Hi all,

I don’t know anything about refunding the shipping difference but Fedex *just* sent me the bill so I will populate the spreadsheets with actual costs for kin today or tomorrow.

I only know v2 will happen after April.

Ah, bummer. Kin's latest blog post said 3/28-4/8 for invoicing and shipping end of April-June. Must not be a US sale then.


I misspoke. V2 will happen in April. That timeline should work since he told me he intended to open preorders for 10 days and ship the boards on april 1st.
==============
https://mekibo.com/

Offline martink

  • Posts: 16
  • Location: Switzerland
Re: [Order] TX60/TX65/TX84se
« Reply #967 on: Mon, 18 March 2019, 13:53:45 »
@martink / others - did you receive an invoice for shipping after filling out the form? I haven't received yet.

I haven't received the shipping invoice, no.

Offline pixelpusher

  • * Elevated Elder
  • Posts: 4179
  • Location: Tennessee - USA
Re: [Order] TX60/TX65/TX84se
« Reply #968 on: Wed, 20 March 2019, 17:36:17 »
So, my Jigon just crashes every time I try to update the layout on my PCB.  Any ideas?

EDIT --

Run as administrator seemed to fix it.  didn't have to do that last time.  weird.
« Last Edit: Wed, 20 March 2019, 17:42:03 by pixelpusher »

Offline Smoff

  • Posts: 139
  • Location: Norrland
  • 817 785
    • Youtube
Re: [Order] TX60/TX65/TX84se
« Reply #969 on: Wed, 20 March 2019, 19:38:49 »
In what order are the shipping invoices for extras sent out? In the order people payed or what?
Was expecting to have my board by now :(
Current boards: Matrix 1.2 OG | Matrix 8xv2.0 | Cherry g80-1000 | Cherry g80-3000 | Matrix 2.0add | Matrix Noah

Boards on the way: Duck Orion v2.5 | Matrix Falcon

Previous boards: BOK.CP | Duck Orion v3 | Mech27v2 | HHKB pro2 x3 | Cherry g80-11800 | NIU mini | Klippe r1 | Brutal60 | Duck Unicorn x Legend | Duck jetfire | Cherry g80-1800 | IDB60 | PC Salamander | Lin Whale r2 | LZ Physix | Duck Viper v3 |

Offline LazerCat

  • Posts: 17
  • Location: Austria
Re: [Order] TX60/TX65/TX84se
« Reply #970 on: Thu, 21 March 2019, 02:19:01 »
I just paid my shipping invoice! :thumb:

Sent from my SM-N950F using Tapatalk


Offline Emir

  • icon mods
  • * Exquisite Elder
  • Posts: 1129
  • Location: Linköping, Sweden
  • Bandit
    • Discord
Re: [Order] TX60/TX65/TX84se
« Reply #971 on: Fri, 22 March 2019, 04:11:53 »
Forgot to update, but I got the shipping refund yesterday (EU).

Offline rope

  • Posts: 64
  • Location: Denmark
  • yeet
Re: [Order] TX60/TX65/TX84se
« Reply #972 on: Fri, 22 March 2019, 04:31:22 »
Forgot to update, but I got the shipping refund yesterday (EU).
Got my shipping refund yesterday too, also EU.

Offline gideon

  • Posts: 11
  • Location: Singapore
Re: [Order] TX60/TX65/TX84se
« Reply #973 on: Fri, 22 March 2019, 05:30:37 »
I haven't got my shipping invoice yet for the antique buy :( the buy was done in late January. Anyone gotten shipping invoice yet?

Offline yap68

  • Posts: 124
Re: [Order] TX60/TX65/TX84se
« Reply #974 on: Fri, 22 March 2019, 08:00:46 »
Mine was on 1st of Feb and yet to receive any shipping invoice. It won't take long, I think.

Offline Hutch

  • Posts: 12
Re: [Order] TX60/TX65/TX84se
« Reply #975 on: Fri, 22 March 2019, 09:12:48 »
Mine was on 1st of Feb and yet to receive any shipping invoice. It won't take long, I think.

I haven't got my shipping invoice yet for the antique buy :( the buy was done in late January. Anyone gotten shipping invoice yet?

I ordered a TX108se on January 29, received the shipping choices on March 11, the shipping invoice on March 21 and it actually shipped March 21 as well. Hope that helps!

Offline LazerCat

  • Posts: 17
  • Location: Austria
Re: [Order] TX60/TX65/TX84se
« Reply #976 on: Fri, 22 March 2019, 09:20:38 »
Mine was on 1st of Feb and yet to receive any shipping invoice. It won't take long, I think.

I haven't got my shipping invoice yet for the antique buy :( the buy was done in late January. Anyone gotten shipping invoice yet?

I ordered a TX108se on January 29, received the shipping choices on March 11, the shipping invoice on March 21 and it actually shipped March 21 as well. Hope that helps!

I joined the same buy on Feb 2nd and got one too. Maybe he's shipping in batches?
« Last Edit: Fri, 22 March 2019, 09:22:12 by LazerCat »

Offline pixelpusher

  • * Elevated Elder
  • Posts: 4179
  • Location: Tennessee - USA
Re: [Order] TX60/TX65/TX84se
« Reply #977 on: Fri, 22 March 2019, 09:36:26 »
I got my refund for shipping from Kin today.  Thanks  :thumb:

Offline T0mb3ry

  • Posts: 1820
  • Location: Germany
  • https://www.instagram.com/t0mb3ry_gh/
    • Flickr
Re: [Order] TX60/TX65/TX84se
« Reply #978 on: Fri, 22 March 2019, 12:20:44 »
I just got huge troubles with the tx65 pcb. Today pcb stopped to respond. On plugging it into usb port there is a win sound which notifies that an usb device has been connected. But thats all. If i try to connect with JigOn then JigOn crashes without any error notifications.

Previously the pcb had already issues but it worked at least. I could not update the firmware because of an connection error.
Code: [Select]
C:\L3_171209>l3cmd.exe cmd boot
status = 5

C:\L3_171209>bootloadHID_l3.exe -r l3.hex
Error reading page size: Communication error with device

C:\L3_171209>pause;
Press any key to continue . . .
I am using English version of win 10 with latest updates.
What i've tried previously in order to update the firmware:
 - i've tried all usb ports available on my computer (including the usb hub) and all other computers at my disposal
 - i've also tried to set the OS keyboard language to US English

Another issue was that the pcb did not worked properly after specific time without power. Say after starting my computer, the pcb blinked and did not responded to any input. To fix that i had to unplug the pcb for a short time. But despite those issues i could use the pcb as usual and even remap the layout with JigOn. Now it stopped working for me at all :(

If someone had experienced the same issues and had fixed it, then please share your solution to that problem.

Otherwise i fear i have to look for an alternative pcb. For example the Zephyr would most probably fit into the TX65 case.

As i've seen in other forums i am not the only one having issues with Leeku PCBs.
https://www.keebtalk.com/t/leeku-pcbs/3683
Its a shame because PCBs have well known issues since a while, but they are still redistributed without any fix. Tho other manufacturers do have the same troubles  :rolleyes:
I've never had issues with PCBs from other manufacturers (including Percent). But well this time the luck left me probably.

Offline T0mb3ry

  • Posts: 1820
  • Location: Germany
  • https://www.instagram.com/t0mb3ry_gh/
    • Flickr
Re: [Order] TX60/TX65/TX84se
« Reply #979 on: Fri, 22 March 2019, 13:36:43 »
Ok i got the pcb to function again.

What i did? I just Updated the pcb with JigOn without using the "Connect" function. Its weird but it worked. Previously the JigOn just crushed if i tried to connect. The weird thing was, JigOn set my default layer to layer 2 which is odd. And also every time i tried to load the bin file with my settings it loaded it with default layer set on 2. I am pretty sure the default layer was set to 0 previously. I do assume there are some serialization problems but it does not make sense to me at all, because i did not changed my bin file with settings. It seems like the pcb and the JigOn software have their own life. So i guess i can expect other surprises in the future.

I still can't update PCB firmware :(

Update: and i still have to unplug the pcb from usb port after system startup.
« Last Edit: Fri, 22 March 2019, 13:43:17 by T0mb3ry »

Offline pixelpusher

  • * Elevated Elder
  • Posts: 4179
  • Location: Tennessee - USA
Re: [Order] TX60/TX65/TX84se
« Reply #980 on: Fri, 22 March 2019, 14:18:22 »
Sometimes the behavior you describe is caused by jigon setting the default layer to 1 instead of 0.  If you have nothing mapped on 1 it just feels like it’s not  working.  I don’t know why it does that but it does. 

The crash thing happens to me unless I run as administrator.  It didn’t used to though. Weird things
« Last Edit: Fri, 22 March 2019, 14:20:08 by pixelpusher »

Offline pixelpusher

  • * Elevated Elder
  • Posts: 4179
  • Location: Tennessee - USA
Re: [Order] TX60/TX65/TX84se
« Reply #981 on: Fri, 22 March 2019, 14:23:23 »
Maybe put a layer0 key on every layer other than 0?  Lol

Offline T0mb3ry

  • Posts: 1820
  • Location: Germany
  • https://www.instagram.com/t0mb3ry_gh/
    • Flickr
Re: [Order] TX60/TX65/TX84se
« Reply #982 on: Fri, 22 March 2019, 14:28:40 »
So i just chatted with Kin via Mail and he will send me a replacement.

Tho i will try to update the new pcb before de soldering the old one and i will report here if it worked. Perhaps is my current pcb erroneous. I don't know.

I will post some pictures of my board once i got proper photos of it with a proper keyset  :rolleyes:.

Sometimes the behavior you describe is caused by jigon setting the default layer to 1 instead of 0.  If you have nothing mapped on 1 it just feels like it’s not  working.  I don’t know why it does that but it does. 

The crash thing happens to me unless I run as administrator.  It didn’t used to though. Weird things
Its magic! lol


Offline pixelpusher

  • * Elevated Elder
  • Posts: 4179
  • Location: Tennessee - USA
Re: [Order] TX60/TX65/TX84se
« Reply #983 on: Fri, 22 March 2019, 17:36:18 »
Built with lubed fei switches today

215786-0

Just waiting for my carbon bone set for it. 

215791-1
« Last Edit: Fri, 22 March 2019, 22:29:29 by pixelpusher »

Offline T0mb3ry

  • Posts: 1820
  • Location: Germany
  • https://www.instagram.com/t0mb3ry_gh/
    • Flickr
Re: [Order] TX60/TX65/TX84se
« Reply #984 on: Sat, 23 March 2019, 01:46:27 »
Just waiting for my carbon bone set for it. 

Well that is my idea too but i will also combine it with boneyard alphas.

Offline pixelpusher

  • * Elevated Elder
  • Posts: 4179
  • Location: Tennessee - USA
Re: [Order] TX60/TX65/TX84se
« Reply #985 on: Sat, 23 March 2019, 01:56:00 »
Just waiting for my carbon bone set for it. 

Well that is my idea too but i will also combine it with boneyard alphas.

Shoot, everyone knows Umka mods is where it's at.

Offline T0mb3ry

  • Posts: 1820
  • Location: Germany
  • https://www.instagram.com/t0mb3ry_gh/
    • Flickr
Re: [Order] TX60/TX65/TX84se
« Reply #986 on: Sat, 23 March 2019, 02:04:57 »
Just waiting for my carbon bone set for it. 

Well that is my idea too but i will also combine it with boneyard alphas.

Shoot, everyone knows Umka mods is where it's at.

Nah. Umka is a nice set but the copper case looks best imo with dark sets like WoB, Oblivion, Bone/Boneyard, etc...

Offline yap68

  • Posts: 124
Re: [Order] TX60/TX65/TX84se
« Reply #987 on: Sat, 23 March 2019, 06:40:17 »
Antique shipping invoice received!

Offline Smoff

  • Posts: 139
  • Location: Norrland
  • 817 785
    • Youtube
Re: [Order] TX60/TX65/TX84se
« Reply #988 on: Thu, 28 March 2019, 09:08:47 »
Got my Bok.cp from the extras buy today!  :D



Current boards: Matrix 1.2 OG | Matrix 8xv2.0 | Cherry g80-1000 | Cherry g80-3000 | Matrix 2.0add | Matrix Noah

Boards on the way: Duck Orion v2.5 | Matrix Falcon

Previous boards: BOK.CP | Duck Orion v3 | Mech27v2 | HHKB pro2 x3 | Cherry g80-11800 | NIU mini | Klippe r1 | Brutal60 | Duck Unicorn x Legend | Duck jetfire | Cherry g80-1800 | IDB60 | PC Salamander | Lin Whale r2 | LZ Physix | Duck Viper v3 |

Offline T0mb3ry

  • Posts: 1820
  • Location: Germany
  • https://www.instagram.com/t0mb3ry_gh/
    • Flickr
Re: [Order] TX60/TX65/TX84se [Finished]
« Reply #989 on: Sat, 06 April 2019, 06:04:42 »
Just got new pcb as replacement. And ofc. i have tested it and it works well without any issues. It seems like i got erroneous pcb previously :( oh well at least i discovered another nice switch combo which it will use for my rebuild so i will be more worth for me to do so :))
« Last Edit: Sat, 06 April 2019, 06:20:59 by T0mb3ry »

Offline Emir

  • icon mods
  • * Exquisite Elder
  • Posts: 1129
  • Location: Linköping, Sweden
  • Bandit
    • Discord
Re: [Order] TX60/TX65/TX84se
« Reply #990 on: Sat, 06 April 2019, 07:07:44 »
Got my Bok.cp from the extras buy today!  :D
Show Image

Show Image

Show Image

Show Image


Sexy! Wish I jumped on for a bok.cp as well. :O

Offline cjt9000

  • Posts: 19
  • Location: Massachusetts, USA
  • Beige Man
Re: [Order] TX60/TX65/TX84se [Finished]
« Reply #991 on: Mon, 08 April 2019, 13:21:48 »
Just saw the thread was marked as [Finished], but I still haven't gotten any tracking info or shipping refund? Not super worried but more just wondering what's up.
B E I G E

Offline Jedi

  • Posts: 512
  • Location: 702
Re: [Order] TX60/TX65/TX84se [Finished]
« Reply #992 on: Mon, 08 April 2019, 16:53:48 »
Yeah don't worry too much.  The thread was marked finished for the previous GB then Kin and Popkorn continued this thread for extras.  Kin is likely doing QC on the remaining boards before sending them out to the remaining buyers.  Kin doesn't post much because he is working on all the orders after they get back from his factory.  You'll be extremely impressed when the shipment is ready as he ships as soon as the boards are ready.

Offline cjt9000

  • Posts: 19
  • Location: Massachusetts, USA
  • Beige Man
Re: [Order] TX60/TX65/TX84se [Finished]
« Reply #993 on: Wed, 24 April 2019, 13:51:58 »
Yeah don't worry too much.  The thread was marked finished for the previous GB then Kin and Popkorn continued this thread for extras.  Kin is likely doing QC on the remaining boards before sending them out to the remaining buyers.  Kin doesn't post much because he is working on all the orders after they get back from his factory.  You'll be extremely impressed when the shipment is ready as he ships as soon as the boards are ready.

Forgot to update, but the board arrived fine. Turns out Kin just missed the paypal confirmation for mine but he took good care of me. Board looks and feels great, definitely glad I got in on the antiques.
B E I G E

Offline pixelpusher

  • * Elevated Elder
  • Posts: 4179
  • Location: Tennessee - USA
Re: [Order] TX60/TX65/TX84se [Finished]
« Reply #994 on: Sat, 04 May 2019, 11:28:56 »
Has Kin ever released plate files for these boards?  I was thinking about having an additional plate made for my TX65

Offline TheEerieCold

  • Posts: 164
  • Location: VA, USA
Re: [Order] TX60/TX65/TX84se [Finished]
« Reply #995 on: Mon, 06 May 2019, 17:16:00 »
Hey popkorn do you know when Kin plans to send you restocks of the springs? I've got a few builds I'd love to use them with.
Matrix Abel+ Ver.Dark / Matrix 8XV2.0 (Red) / Matrix 8XV2.2 (Blue) / Matrix 8XV2.2 (Caustic Custom) / Matrix Noah / Matrix Abel X RX-178 Ver.CA / Matrix 8XV2.0 ADD (Silver) / Matrix Falcon (Nebula) / Matrix Vita (McFlurry) / Matrix ME SE (McFlurry)

Offline popkorn62

  • Posts: 602
  • Location: California
  • No keyboards for old men
    • Mekibo
Re: [Order] TX60/TX65/TX84se [Finished]
« Reply #996 on: Thu, 09 May 2019, 19:25:00 »
Hey popkorn do you know when Kin plans to send you restocks of the springs? I've got a few builds I'd love to use them with.

I think in 2-3 weeks I should have a lot more :)
==============
https://mekibo.com/

Offline popkorn62

  • Posts: 602
  • Location: California
  • No keyboards for old men
    • Mekibo
Re: [Order] TX60/TX65/TX84se [Finished]
« Reply #997 on: Tue, 21 May 2019, 20:40:23 »
Hey popkorn do you know when Kin plans to send you restocks of the springs? I've got a few builds I'd love to use them with.

As promised, some springs are back in stock except 55g  :thumb:
==============
https://mekibo.com/

Offline pixelpusher

  • * Elevated Elder
  • Posts: 4179
  • Location: Tennessee - USA
Re: [Order] TX60/TX65/TX84se [Finished]
« Reply #998 on: Tue, 21 May 2019, 21:10:01 »
Hey popkorn do you know when Kin plans to send you restocks of the springs? I've got a few builds I'd love to use them with.

As promised, some springs are back in stock except 55g  :thumb:

Thanks, just ordered some.

Offline TheEerieCold

  • Posts: 164
  • Location: VA, USA
Re: [Order] TX60/TX65/TX84se [Finished]
« Reply #999 on: Tue, 21 May 2019, 22:50:41 »
Hey popkorn do you know when Kin plans to send you restocks of the springs? I've got a few builds I'd love to use them with.

As promised, some springs are back in stock except 55g  :thumb:

Haha and 55g was what I wanted most! Went ahead and ordered some 60g and 70g, thanks a bunch!
Matrix Abel+ Ver.Dark / Matrix 8XV2.0 (Red) / Matrix 8XV2.2 (Blue) / Matrix 8XV2.2 (Caustic Custom) / Matrix Noah / Matrix Abel X RX-178 Ver.CA / Matrix 8XV2.0 ADD (Silver) / Matrix Falcon (Nebula) / Matrix Vita (McFlurry) / Matrix ME SE (McFlurry)