Author Topic: [GB] Createboard 60% Solid Wood Case (Shipping)  (Read 32658 times)

0 Members and 1 Guest are viewing this topic.

Offline Createboardhk

  • Thread Starter
  • Posts: 50
  • Location: Hong Kong
    • Createboard
[GB] Createboard 60% Solid Wood Case (Shipping)
« on: Sat, 26 May 2018, 23:53:28 »
Hello geekhack!

This is the GB for Createboard 60% wood case

IC link: https://geekhack.org/index.php?topic=95359.0

196409-0

196411-1

196413-2

Other photos:
https://imgur.com/a/AjQNyzh

Order link: https://goo.gl/forms/iHvlxGG2OnZtBCdn1

Detail:
•   6 types of wood to choose from: Black walnut, Padauk, Bubinga, Beech, Maple, Ash
•   Designed for 60% keyboards
•   High-profile
•   Coated with Osmo hardwax oil
•   Dimension: 31x12 cm (12.2 x 4.72 inch)
•   Weight: 300g~500g (0.66 ~ 1.10 lbs)

Include:
•   Wood case
•   Screws
•   Sticker feet

Price:
•   Black walnut, Padauk, Beech, Maple, Ash: 76USD
•   Bubinga: 77USD
•   4.4% Paypal fee
•   Other details will be listed in the invoice

Shipping:
•   Shipping will be sent from Hong Kong
•   After we received your order, We will update the delivery cost according to your shipping address in the invoice

Timeline:
•   Order Deadline: 25/6/2018
•   Estimated shipping date: 25/8/2018
•   Invoice will be sent out through GB time, and deadline of payment will be 28/6/2018

Remark:
•   Please make sure your PCB is suitable for this wood case
•   Suitable PCBs include GH60, XD60, BFACE60, YD60Ble

Please feel free to contact me if you have any questions.

Thank you!
« Last Edit: Fri, 30 November 2018, 02:31:56 by Createboardhk »

Offline Signature

  • master of puppers
  • * Moderator
  • Posts: 1914
  • Location: Sweden
  • snoozing
Re: [GB] Createboard 60% Solid Wood Case
« Reply #1 on: Sun, 27 May 2018, 05:09:21 »
Approved! :)
Very busy with studies atm.

Offline schlep

  • Posts: 72
Re: [GB] Createboard 60% Solid Wood Case
« Reply #2 on: Sun, 27 May 2018, 06:58:11 »
I would assume it can fit a poker3?

Offline Starius

  • Posts: 602
Re: [GB] Createboard 60% Solid Wood Case
« Reply #3 on: Sun, 27 May 2018, 10:25:55 »
I submitted my order!   
Congrats on starting the buy!

Offline Azou

  • Posts: 12
Re: [GB] Createboard 60% Solid Wood Case
« Reply #4 on: Sun, 27 May 2018, 11:43:38 »
I'm down for it !
Could you just confirm that the case in your last picture (with the keycaps on) is the "Bubinga" wood ?

Offline pixelpusher

  • * Elevated Elder
  • Posts: 4179
  • Location: Tennessee - USA
Re: [GB] Createboard 60% Solid Wood Case
« Reply #5 on: Sun, 27 May 2018, 13:34:46 »
Good stuff.  Getting 2

Offline enrique.aliaga

  • Posts: 250
Re: [GB] Createboard 60% Solid Wood Case
« Reply #6 on: Sun, 27 May 2018, 14:39:22 »
I'm down for it !
Could you just confirm that the case in your last picture (with the keycaps on) is the "Bubinga" wood ?

Got that question, too. Which color is that?


Sent from my iPhone using Tapatalk

Offline KaosJ

  • Posts: 1054
Re: [GB] Createboard 60% Solid Wood Case
« Reply #7 on: Sun, 27 May 2018, 16:05:25 »
DZ60 tried? 




Offline Poesjuh

  • Posts: 726
  • Location: Netherlands - N-H
Re: [GB] Createboard 60% Solid Wood Case
« Reply #8 on: Sun, 27 May 2018, 17:25:10 »
Do you have actual pictures of the different wood options? Or know a website where I can find those? :P
Second question; you mention different weights, what's the weight difference between the different kinds of wood?

I might use it as a keyboard to take to work so prefer something lighter :)

Offline Marutks

  • Posts: 310
  • Location: London
Re: [GB] Createboard 60% Solid Wood Case
« Reply #9 on: Sun, 27 May 2018, 17:27:19 »
is it compatible with dz60?

Offline Origami_Rabbit

  • Posts: 17
  • Location: Straya
Re: [GB] Createboard 60% Solid Wood Case
« Reply #10 on: Sun, 27 May 2018, 17:44:05 »
As someone mentioned, please show available wood options. How about ebony?
Also would like to  know if compatible with hasu's apls64 pcb?
Cheers!
HHKB Pro JP Type-S with hasu alt controller
Leopold FC980c

Offline droideggs

  • Posts: 21
Re: [GB] Createboard 60% Solid Wood Case
« Reply #11 on: Sun, 27 May 2018, 19:16:02 »
As someone mentioned, please show available wood options. How about ebony?
Also would like to  know if compatible with hasu's apls64 pcb?
Cheers!

would like to know as well, if its compatible with hasu's alps64 pcb

Offline dodgeyhack

  • Posts: 42
  • Location: Sydney, Australia
Re: [GB] Createboard 60% Solid Wood Case
« Reply #12 on: Sun, 27 May 2018, 23:22:22 »
I would assume it can fit a poker3?

From memory, the pok3r plate is a bit wider than standard. Do some searching around the kbdfans 60% aluminium case thread and you should find more details - they're a bit hazy for me.

Offline aya3154

  • Posts: 71
Re: [GB] Createboard 60% Solid Wood Case
« Reply #13 on: Mon, 28 May 2018, 00:50:45 »
Is this compatible with the Zeal 60? Interested in the case in Bubinga  :thumb:

Offline nguyenhimself

  • Posts: 672
Re: [GB] Createboard 60% Solid Wood Case
« Reply #14 on: Mon, 28 May 2018, 01:30:44 »
Is this compatible with the Zeal 60? Interested in the case in Bubinga  :thumb:

I imagine they will be compatible, but why opting for the expensive Zeal60 when this case cannot show any underglow lighting at all?

Offline Createboardhk

  • Thread Starter
  • Posts: 50
  • Location: Hong Kong
    • Createboard
Re: [GB] Createboard 60% Solid Wood Case
« Reply #15 on: Mon, 28 May 2018, 12:17:23 »
Unfortunately, I don't have many of the PCBs mentioned in the comments section. But the general rule of thumb is that so long your 60% PCB has the same 6 screw's positions and even better so if it fits into a normal standard 60% case. It will be compatible.

The screw's positions of the wood case are as followed:

196537-0

PCB and plate photo found on google:

196539-1

196541-2

About the wood options, I've already updated at ic and order link, you can find it here if you want.

Different wood would have different weight. Bubinga is the heaviest of the 6. if you prefer a lighter case, we would suggest Maple or Ash.

Sorry to tell you our current case is in black walnut wood, but not Bubinga. We've shot the photo under the sun, so it may be brighter than the sample.

For an idea of Bulbinga wood, please see the one below:

196543-3


Offline lecorsair

  • Posts: 214
Re: [GB] Createboard 60% Solid Wood Case
« Reply #16 on: Mon, 28 May 2018, 14:23:48 »
Is this compatible with the Zeal 60? Interested in the case in Bubinga  :thumb:

I imagine they will be compatible, but why opting for the expensive Zeal60 when this case cannot show any underglow lighting at all?

Per key RGB?

Offline AuthenticDanger

  • Posts: 402
Re: [GB] Createboard 60% Solid Wood Case
« Reply #17 on: Mon, 28 May 2018, 19:32:58 »
Can we get this without a logo?
F Keys belong on the left.

Offline Createboardhk

  • Thread Starter
  • Posts: 50
  • Location: Hong Kong
    • Createboard
Re: [GB] Createboard 60% Solid Wood Case
« Reply #18 on: Mon, 28 May 2018, 20:54:48 »
Can we get this without a logo?

No unfortunately we can't. This is for identifying our own case so we can follow up when we need be.

Offline AuthenticDanger

  • Posts: 402
Re: [GB] Createboard 60% Solid Wood Case
« Reply #19 on: Mon, 28 May 2018, 23:13:45 »
Can we get this without a logo?

No unfortunately we can't. This is for identifying our own case so we can follow up when we need be.

Are there any photos of where and how big the logo would be on both the back and the inside?
F Keys belong on the left.

Offline enrique.aliaga

  • Posts: 250
Re: [GB] Createboard 60% Solid Wood Case
« Reply #20 on: Tue, 29 May 2018, 12:08:32 »
Yay! Just joined the GB. Black Walnut for me. OP, if there is ever a R2, I might go for a light color, such as Maple.

Thanks a lot!


Sent from my iPhone using Tapatalk

Offline Createboardhk

  • Thread Starter
  • Posts: 50
  • Location: Hong Kong
    • Createboard
Re: [GB] Createboard 60% Solid Wood Case
« Reply #21 on: Tue, 29 May 2018, 12:55:49 »
Can we get this without a logo?

No unfortunately we can't. This is for identifying our own case so we can follow up when we need be.

Are there any photos of where and how big the logo would be on both the back and the inside?

I've sorted out an album for the wood case, inside you'll find the case being shot from multiple angles, including the back with the Logo on. Please see the link below,

http://imgur.com/a/AjQNyzh

While I don't have a case with the logo engraved inside, please expect it to be relatively smaller than the logo at the back, positioning at the left side within the case.

Offline Azou

  • Posts: 12
Re: [GB] Createboard 60% Solid Wood Case
« Reply #22 on: Tue, 29 May 2018, 15:20:26 »
Joined as well !
Thanks for the answers OP

Offline AuthenticDanger

  • Posts: 402
Re: [GB] Createboard 60% Solid Wood Case
« Reply #23 on: Tue, 29 May 2018, 23:22:47 »
Oh, I just thought of one more thing: feet.

Any chance of getting some recessed circles for rubber bumpons/feet so that the case doesn't slide around (or have the bottom get scratched up)?
F Keys belong on the left.

Offline aya3154

  • Posts: 71
Re: [GB] Createboard 60% Solid Wood Case
« Reply #24 on: Wed, 30 May 2018, 08:43:47 »
Is this compatible with the Zeal 60? Interested in the case in Bubinga  :thumb:

I imagine they will be compatible, but why opting for the expensive Zeal60 when this case cannot show any underglow lighting at all?

 Zeal60 is my fav so personal pref

Offline Starius

  • Posts: 602
Re: [GB] Createboard 60% Solid Wood Case
« Reply #25 on: Wed, 30 May 2018, 21:18:52 »


I got mine today, at any rate.  :)

Hope the GB is doing well.
This will be my first wood keyboard case!

Offline macken

  • Posts: 70
  • Location: Finland
Re: [GB] Createboard 60% Solid Wood Case
« Reply #26 on: Fri, 01 June 2018, 15:10:54 »
Will this work with a DZ60? Any MOQ?

Offline Createboardhk

  • Thread Starter
  • Posts: 50
  • Location: Hong Kong
    • Createboard
Re: [GB] Createboard 60% Solid Wood Case
« Reply #27 on: Fri, 01 June 2018, 22:43:55 »
Oh, I just thought of one more thing: feet.

Any chance of getting some recessed circles for rubber bumpons/feet so that the case doesn't slide around (or have the bottom get scratched up)?

Sorry guys. It's been really busy this week, so we can’t reply in time.

About the feet, we haven't include a recessed area on the case for feet, however we do include removable mounting in the order. We decided we didn't want to fix an area for mounting, so you are free to paste and adjust it wherever you like on the wood case.

Offline Createboardhk

  • Thread Starter
  • Posts: 50
  • Location: Hong Kong
    • Createboard
Re: [GB] Createboard 60% Solid Wood Case
« Reply #28 on: Fri, 01 June 2018, 22:45:15 »
Show Image


I got mine today, at any rate.  :)

Hope the GB is doing well.
This will be my first wood keyboard case!

Thanks for the friendly reminder :D

Yes we will continue sending out invoices before 25/6/2018.When you receive it, please check the details again as we will update the shipping cost according to your shipping address, please remember to pay before our deadline, as it will be the cut off date for us informing the factory the number of cases needed to be made.

Thanks again!
« Last Edit: Tue, 05 June 2018, 10:36:27 by Createboardhk »

Offline Createboardhk

  • Thread Starter
  • Posts: 50
  • Location: Hong Kong
    • Createboard
Re: [GB] Createboard 60% Solid Wood Case
« Reply #29 on: Fri, 01 June 2018, 23:17:48 »
Will this work with a DZ60? Any MOQ?

Hi, sorry again I don't have a DZ60 in hand, our wood case is a very standard 60% case, the rule of thumb is if it has the same screw areas as the one I marked (please refer to reply #15) it should fit. Also, if your pcb fits with standard sizes 60% cases such as 5 degrees, yes it would fit well on the wood case.

And nope we don't have an MOQ.

Offline pixelpusher

  • * Elevated Elder
  • Posts: 4179
  • Location: Tennessee - USA
Re: [GB] Createboard 60% Solid Wood Case
« Reply #30 on: Sat, 02 June 2018, 00:13:40 »
I still never got an invoice for my order.  What should I do about that?

Offline goodman247

  • Posts: 64
  • Location: Tatooine
  • It's confirmed, I'm an idiot.
Re: [GB] Createboard 60% Solid Wood Case
« Reply #31 on: Sat, 02 June 2018, 01:10:58 »
I love this design and forwarded to my friend :) I'm still too noob to build my own board yet, but still can appreciate this :)

Offline Createboardhk

  • Thread Starter
  • Posts: 50
  • Location: Hong Kong
    • Createboard
Re: [GB] Createboard 60% Solid Wood Case
« Reply #32 on: Sat, 02 June 2018, 01:16:05 »
I still never got an invoice for my order.  What should I do about that?

Please don’t worry, we will be sending it out to you soon! It will usualy take 3 days time as we needed to process your order. Please do raise it in this thread or email us directly if you haven’t received an invoice, we will follow up with you asap!

Offline Createboardhk

  • Thread Starter
  • Posts: 50
  • Location: Hong Kong
    • Createboard
Re: [GB] Createboard 60% Solid Wood Case
« Reply #33 on: Sat, 02 June 2018, 02:57:18 »
I love this design and forwarded to my friend :) I'm still too noob to build my own board yet, but still can appreciate this :)

Hey! Glad to know you like the design :) I think there is so much you can play around with customized mechanical keyboards, and part of the fun is assembling it! Hope you get to build your dream board someday soon ;)

Offline Starius

  • Posts: 602
Re: [GB] Createboard 60% Solid Wood Case
« Reply #34 on: Sat, 02 June 2018, 07:19:37 »
I love this design and forwarded to my friend :) I'm still too noob to build my own board yet, but still can appreciate this :)

I can sympathize about being intimidated by assembling a board from scratch for the first time. 
That's why I'm probably going with a fully assembled board like this one, for this particular case.
https://kbdfans.cn/collections/fully-assembled-keyboard/products/fully-assembled-yd60ble-pcb

Someday I'll get to soldering myself....  probably.   ;)

Offline ReverbSlush

  • Posts: 254
  • 16/52 RNG score
Re: [GB] Createboard 60% Solid Wood Case
« Reply #35 on: Mon, 04 June 2018, 11:34:37 »
I grabbed the beech.  Is there an email I can send about my order though?  I swear I put "inside" for the logo but it's coming up "back" when I view it.

Offline enrique.aliaga

  • Posts: 250
Re: [GB] Createboard 60% Solid Wood Case
« Reply #36 on: Mon, 04 June 2018, 11:54:11 »
Received the invoice last Saturday; just payed for it today.

I'm eargerly waiting for this case! It's going to be part of my very first build. Can't wait! :D

Offline Createboardhk

  • Thread Starter
  • Posts: 50
  • Location: Hong Kong
    • Createboard
Re: [GB] Createboard 60% Solid Wood Case
« Reply #37 on: Tue, 05 June 2018, 20:59:47 »
I love this design and forwarded to my friend :) I'm still too noob to build my own board yet, but still can appreciate this :)

I can sympathize about being intimidated by assembling a board from scratch for the first time. 
That's why I'm probably going with a fully assembled board like this one, for this particular case.
https://kbdfans.cn/collections/fully-assembled-keyboard/products/fully-assembled-yd60ble-pcb

Someday I'll get to soldering myself....  probably.   ;)

That's actually really handy. YD60BLE is one of the Bluetooth PCBs I really appreciate, it's much more stable and works so smoothly.


I grabbed the beech.  Is there an email I can send about my order though?  I swear I put "inside" for the logo but it's coming up "back" when I view it.

No worries, we can change it for you. If you have other questions, you can email us through createboardhk@gmail.com or just leave a message here.

Received the invoice last Saturday; just payed for it today.

I'm eargerly waiting for this case! It's going to be part of my very first build. Can't wait! :D

Just wanted to say a big thanks for the support since IC!

Offline macken

  • Posts: 70
  • Location: Finland
Re: [GB] Createboard 60% Solid Wood Case
« Reply #38 on: Wed, 06 June 2018, 11:53:53 »
Will these be quality controlled and checked before shipped out?

Offline Data

  • Posts: 2608
  • Location: Orlando, FL
Re: [GB] Createboard 60% Solid Wood Case
« Reply #39 on: Wed, 06 June 2018, 11:56:57 »
So many awesome wood cases, but only for 60s.  Sadface.

Good luck with GB!

Offline zap2oz

  • Posts: 55
Re: [GB] Createboard 60% Solid Wood Case
« Reply #40 on: Wed, 06 June 2018, 22:37:58 »
Really like these! I have to consider whether or not I want to build another 60%, but if I do then my money is yours. GLWGB!

Offline pixelpusher

  • * Elevated Elder
  • Posts: 4179
  • Location: Tennessee - USA
Re: [GB] Createboard 60% Solid Wood Case
« Reply #41 on: Thu, 07 June 2018, 07:12:08 »
So many awesome wood cases, but only for 60s.  Sadface.

Good luck with GB!
Bigger would only be trouble. 

 I have 3 other wood cases at the moment.  All of them have warped over time as they age.  Unless they’ve cut these close to final form and let them sit for a year or so, they will probably also warp in time.  Imagine how bad that would turn out with a tkl or full-size board.

I just use various size feet/pads on the bottom to accommodate for warped cases to keep them from wobbling while typing. 

Offline Createboardhk

  • Thread Starter
  • Posts: 50
  • Location: Hong Kong
    • Createboard
Re: [GB] Createboard 60% Solid Wood Case
« Reply #42 on: Sat, 09 June 2018, 03:24:10 »
Will these be quality controlled and checked before shipped out?

Yes there is QC control, we will also check every case before shipping. Every case will be numbered and recorded before we send it out.

Offline Createboardhk

  • Thread Starter
  • Posts: 50
  • Location: Hong Kong
    • Createboard
Re: [GB] Createboard 60% Solid Wood Case
« Reply #43 on: Sat, 16 June 2018, 00:28:30 »
We've hit our target! We've been really excited and can't say how thankful we are :) For those who've purchased 2 cases or more, we've got a small gift for you ;) Check out our wood keycaps,  R4 at OEM profile,  we'll be giving out a random wood keycap along with your case.

198152-0

Offline pixelpusher

  • * Elevated Elder
  • Posts: 4179
  • Location: Tennessee - USA
Re: [GB] Createboard 60% Solid Wood Case
« Reply #44 on: Sat, 16 June 2018, 00:32:22 »
We've hit our target! We've been really excited and can't say how thankful we are :) For those who've purchased 2 cases or more, we've got a small gift for you ;) Check out our wood keycaps,  R4 at OEM profile,  we'll be giving out a random wood keycap along with your case.

(Attachment Link)

Nice!  Glad you hit your target.  Looking forward to the cases, and the small gift is nice.

Offline Azou

  • Posts: 12
Re: [GB] Createboard 60% Solid Wood Case
« Reply #45 on: Sat, 16 June 2018, 13:51:17 »
Beautiful ! Congratz, can't wait

Offline macken

  • Posts: 70
  • Location: Finland
Re: [GB] Createboard 60% Solid Wood Case
« Reply #46 on: Mon, 18 June 2018, 01:08:54 »
Nice! Can't wait for my case to arrive.

Offline Starius

  • Posts: 602
Re: [GB] Createboard 60% Solid Wood Case
« Reply #47 on: Sun, 24 June 2018, 08:28:50 »
Just wanted to give this thread a little bump because, if I'm not mistaken, tomorrow is the last day for this group buy!

Offline Createboardhk

  • Thread Starter
  • Posts: 50
  • Location: Hong Kong
    • Createboard
Re: [GB] Createboard 60% Solid Wood Case
« Reply #48 on: Mon, 25 June 2018, 12:04:20 »
Hey everyone! It's now 26th in Hong Kong and the group buy has been concluded!
The deadline for payment is on 28th June, please do remember to settle it soon if you haven't!

Thanks for the support again everyone;)

Estimated delivery date: End of August.

Offline befbef

  • Posts: 149
  • Location: Germany
Re: [GB] Createboard 60% Solid Wood Case (GB Closed)
« Reply #49 on: Thu, 02 August 2018, 03:48:55 »
Could you tell us the current status please?