Post by: VictorMTB on Fri, 20 September 2019, 16:45:00
This is an interest check for our CNC milled aluminum spacebar keycaps. I made this particular one to test our HB60 hhkb tops.
We would really like to start with cherry 7U and 6.25U.(we have decided to wait on 6U for now but don't lose hope!)
Everything will be designed and manufactured here in Richmond,BC by myself and shop owner.
Keys will be anodized to prevent scratches and dings.
Natural Shiny aluminum and Brass will be available too!
Price should be around $30-$40 USD per space bar. depending on the type of finish.
Do let us know what we can improve on and what you'd like to see from us!
If there is enough interest we'd also love to machine SA profile and Topre keycaps.
Here is a picture of our finished 6U OEM profile space bar.
10/3/2019 Update
Sorry for the late reply guys, We have decided we are going ahead with this project and you should expect to see a group buy from us within a few weeks.
By popular demand we will be starting with 6.25u and 7u Cherry profile spacebars. This also goes for brass spacebars.
In the future we would like to machine many different sizes in aluminum and brass.. and different profiles too!
Now, I'll try to figure out how to make a poll for colors...
Shiny Natural Aluminum will always be available - we would just have to figure out what to coat it with.
Keep sending us your suggestions!
(https://imgur.com/eynn5e9.jpg)
(https://imgur.com/7QKdnyb.jpg)
Here is our local anodizing shop's color swatch.
(https://imgur.com/bn0PvNi.jpg)
Comment with your color preference and we'll pick 3-4 of the most popular colors.
Remember this vote is for the anodized aluminum space bars. Polished brass and natural aluminum will be available.
Post by: Abec13 on Fri, 20 September 2019, 16:49:12
Edit: various colors maybe?
Post by: Xynerorias on Fri, 20 September 2019, 17:01:14
Sent from my ONE A2001 using Tapatalk
Post by: IOVERCALLHISTIOCYTES on Fri, 20 September 2019, 17:12:49
This might be heresy, but I bet a lotta people here would rather pay 40$ than 30, and get it made / made faster / made better.
Post by: easy_rider on Fri, 20 September 2019, 17:20:36
I mostly split space, then 6.25u, then 7, but I'd buy a 7.
This might be heresy, but I bet a lotta people here would rather pay 40$ than 30, and get it made / made faster / made better.
yea, I'd prefer better quality for 40$.
Post by: ja.ze on Fri, 20 September 2019, 17:28:15
Down for a 7U cherry.
Sent from my Pixel 2 using Tapatalk
Post by: Cornutgi on Fri, 20 September 2019, 19:05:46
Post by: Acereconkeys on Fri, 20 September 2019, 19:48:40
Post by: gminso on Fri, 20 September 2019, 20:18:42
Post by: Techichi on Fri, 20 September 2019, 20:23:09
Post by: KingOfMemes on Fri, 20 September 2019, 20:34:54
how much would 7u weigh? I am wondering if I need stiffer switch for this.I knew those 180g springs I bought would come in handy someday
Post by: Kerasan on Sat, 21 September 2019, 00:48:13
Post by: PheonixStarr on Sat, 21 September 2019, 02:12:03
$30 is an incredible price point. I think, personally, I would not mind going even up to $50 if it meant better finish (gentler feed rate, better ano, cleaner beadblast, etc), and very careful tolerance on the crosspoint mount. 6u is an interesting size option; I think you'd get the most mileage out of 6.25 and 7 unit bars, though. Let us know what colors you plan to offer--that is, if you're even intending to anodize it. Nothing wrong with polished or PVD aluminum, of course.
If we could know more about the specs--weight, material, etc, that'd be real nice. Consider me intrigued.
Post by: saint_james on Sat, 21 September 2019, 03:02:00
Post by: growler on Sat, 21 September 2019, 04:07:29
Quality is everything
Ohhh, and Brass!!
growler
Post by: Rob27shred on Sat, 21 September 2019, 04:11:48
how much would 7u weigh? I am wondering if I need stiffer switch for this.I knew those 180g springs I bought would come in handy someday
LOL, those things are beasts! I got in my head that I wanted to try them awhile back so I swapped them into some Gat clears & swapped them into a Pok3r I had sitting. Used it a couple times & realized there is such a thing as a "meme switch"!
Post by: lolafineday on Sat, 21 September 2019, 11:34:21
Sent from my SM-G975F using Tapatalk
Post by: mydens on Sat, 21 September 2019, 11:58:45
Post by: Sup on Sat, 21 September 2019, 13:30:08
Post by: dorf on Sat, 21 September 2019, 13:48:17
Post by: vicissitude on Sun, 22 September 2019, 09:12:55
Post by: RETURNISO on Sun, 22 September 2019, 10:20:19
Post by: ZyBeR on Sun, 22 September 2019, 12:41:46
Sent from my iPad using Tapatalk
Post by: _ODIN_ on Sun, 22 September 2019, 13:11:36
Post by: GigaFlop on Sun, 22 September 2019, 13:52:41
Post by: ab042896 on Sun, 22 September 2019, 14:53:26
Post by: alanskiii on Sun, 22 September 2019, 16:04:48
Sent from my iPhone using Tapatalk
Post by: gminso on Sun, 22 September 2019, 22:06:51
Post by: coffeeshopcoder on Mon, 23 September 2019, 00:28:02
Post by: VictorMTB on Mon, 23 September 2019, 00:36:06
can you consider more color options?
I should be able to show you our color swatch tomorrow. we will offer different kinds of anodized colors, and will put it up for a vote most likely.
Post by: VictorMTB on Mon, 23 September 2019, 00:39:25
Please make brass space bar or a full brass keyset thx.
Full brass keyset is tempting but.. all brass bottom row? very possible :)
Post by: VictorMTB on Mon, 23 September 2019, 00:41:03
This is definitely some interesting stuff.
$30 is an incredible price point. I think, personally, I would not mind going even up to $50 if it meant better finish (gentler feed rate, better ano, cleaner beadblast, etc), and very careful tolerance on the crosspoint mount. 6u is an interesting size option; I think you'd get the most mileage out of 6.25 and 7 unit bars, though. Let us know what colors you plan to offer--that is, if you're even intending to anodize it. Nothing wrong with polished or PVD aluminum, of course.
If we could know more about the specs--weight, material, etc, that'd be real nice. Consider me intrigued.
Thanks for your input! we will take this into consideration. Specs is definitely on the priority list right now.
We will definitely be offering anodized keys,and will be posting our color swatch tomorrow!
Post by: LightningXI on Mon, 23 September 2019, 05:21:59
I still need a grey-ish Topre 7u spacebar but nobody will make one :(
Post by: VictorMTB on Tue, 24 September 2019, 02:19:31
I'd be in if there were 6.25u
In for 7u and 6.25u -- gold ano / brass -- SA profile
In for cherry 7 or a 6.25 if that gains any traction. Gold/brass options would be cool as well.
6,25 and 7u here :)
I guess the general consensus is to start with 6.25u and 7u.
Here are the different colors from our local anodizing shop we'll have to vote on.
(https://imgur.com/5lc2tqi.jpg)
Post by: enome on Tue, 24 September 2019, 03:55:36
Post by: Kerasan on Tue, 24 September 2019, 04:55:39
I'd be in if there were 6.25uIn for 7u and 6.25u -- gold ano / brass -- SA profileIn for cherry 7 or a 6.25 if that gains any traction. Gold/brass options would be cool as well.6,25 and 7u here :)
I guess the general consensus is to start with 6.25u and 7u.
Here are the different colors from our local anodizing shop we'll have to vote on.Show Image(https://imgur.com/5lc2tqi.jpg)
Rose Gold ;D
KMK Labs
Post by: h9n9n3 on Tue, 24 September 2019, 08:40:06
Post by: KingOfMemes on Tue, 24 September 2019, 08:58:30
Dude the rose gold is so hot...I'd be in if there were 6.25uIn for 7u and 6.25u -- gold ano / brass -- SA profileIn for cherry 7 or a 6.25 if that gains any traction. Gold/brass options would be cool as well.6,25 and 7u here :)
I guess the general consensus is to start with 6.25u and 7u.
Here are the different colors from our local anodizing shop we'll have to vote on.Show Image(https://imgur.com/5lc2tqi.jpg)
Rose Gold ;D
KMK Labs
Post by: pnkpanther65 on Tue, 24 September 2019, 09:19:54
Post by: lolafineday on Tue, 24 September 2019, 10:41:42
Sent from my SM-G975F using Tapatalk
Post by: VictorMTB on Tue, 24 September 2019, 11:21:45
ne BRASSSSSS avail?
Oh woops of course, But I'm not sure what we would charge for full brass? maybe a full brass bottom row kit?
Remember, everything is designed and manufactured in-house here in Richmond, BC. Canada.
(https://imgur.com/0Ir8mfz.jpg)
Post by: VictorMTB on Tue, 24 September 2019, 11:22:26
Please add 2.25 and 2.0u and 2.75spacebars, for split users
Sent from my SM-G975F using Tapatalk
Bottom row kit very possible!
Post by: voight-kampff on Wed, 25 September 2019, 08:28:54
Post by: donkey on Wed, 25 September 2019, 08:42:38
- easier and cheaper to make (non CNC)
- much quieter yet still satisfyingly hefty
Post by: VictorMTB on Wed, 25 September 2019, 16:18:55
Making spacebars out of hard rubber should be:
- easier and cheaper to make (non CNC)
- much quieter yet still satisfyingly hefty
Unfortunately, we only specialize in CNC machining :( FOR NOW!
Post by: ab042896 on Wed, 25 September 2019, 16:24:03
Making spacebars out of hard rubber should be:What non-CNC method were thinking, injection molding?
- easier and cheaper to make (non CNC)
- much quieter yet still satisfyingly hefty
Post by: gminso on Wed, 25 September 2019, 16:54:19
Post by: VictorMTB on Wed, 25 September 2019, 17:02:51
will there be option for that shining space bar as in your pics?
Absolutely!
Post by: GigaFlop on Wed, 25 September 2019, 21:15:24
I guess the general consensus is to start with 6.25u and 7u.
Here are the different colors from our local anodizing shop we'll have to vote on.
Well ****, I'd love to see if the red brass matches the Akira Red I have on my Tokyo60
Post by: hammerbrotha on Thu, 26 September 2019, 01:50:18
Post by: yui on Fri, 27 September 2019, 01:21:17
Post by: deejasaurus on Fri, 27 September 2019, 01:52:38
Post by: lolafineday on Fri, 27 September 2019, 12:38:37
Sent from my SM-G975F using Tapatalk
Post by: VictorMTB on Fri, 27 September 2019, 15:14:16
I got 2 questions, would you ship in the EU for a reasonable price and would it be possible to get a raw machined spacebar?
you can absolutely order a raw polished aluminum or raw brass in the future! you'll just have to note that its very easy to scratch and also a fingerprint magnet.
That is if you don't anodize.
Post by: ab042896 on Fri, 27 September 2019, 16:08:23
Post by: LoneRegiment on Fri, 27 September 2019, 17:20:21
Orange 12
Post by: VictorMTB on Fri, 27 September 2019, 17:28:58
I would be in if it were a Cherry profile spacebar, and I believe it would be more widely appealing.
Havent had time to fix this post as we're pretty busy, but cherry in anodized or raw aluminum will be available!
Is it possible to get a sound test with the one you've already made :cool:?
yes sir as soon as we have a 6.25u made we shall do that and post.
Post by: enome on Sun, 29 September 2019, 06:45:49
ne BRASSSSSS avail?
Oh woops of course, But I'm not sure what we would charge for full brass? maybe a full brass bottom row kit?
Remember, everything is designed and manufactured in-house here in Richmond, BC. Canada.Show Image(https://imgur.com/0Ir8mfz.jpg)
OMG POGGGGGGERS
JUST TAKE MY MONEY
Post by: iammeuru on Mon, 30 September 2019, 19:39:00
Post by: VictorMTB on Fri, 04 October 2019, 01:14:51
By popular demand we will be starting with 6.25u and 7u Cherry profile spacebars. This also goes for brass spacebars.
In the future we would like to machine many different sizes in aluminum and brass.. and different profiles too!
Now, I'll try to figure out how to make a poll for colors...
Shiny Natural Aluminum will always be available - we would just have to figure out what to coat it with.
Keep sending us your suggestions!
Post by: VictorMTB on Fri, 04 October 2019, 01:18:42
If it's Cherry profile in 7u I'm 100% in. If it's anything else, I'm definitely not in.
I guess you're in!
Post by: alanskiii on Fri, 04 October 2019, 02:08:01
Sorry for the late reply guys, We have decided we are going ahead with this project and you should expect to see a group buy from us within a few weeks.Yesss Brass too!
By popular demand we will be starting with 6.25u and 7u Cherry profile spacebars. This also goes for brass spacebars.
In the future we would like to machine many different sizes in aluminum and brass.. and different profiles too!
Now, I'll try to figure out how to make a poll for colors...
Shiny Natural Aluminum will always be available - we would just have to figure out what to coat it with.
Keep sending us your suggestions!
this will be the perfect touch for my build. Can’t wait!Sent from my iPhone using Tapatalk
Post by: growler on Fri, 04 October 2019, 02:21:02
growler
Post by: Techichi on Fri, 04 October 2019, 09:47:32
Post by: damsenviet on Sun, 06 October 2019, 01:25:52
Post by: wt1155 on Sun, 06 October 2019, 01:53:04
Post by: VictorMTB on Tue, 08 October 2019, 10:48:20
First group buy will be 6.25u and 7u cherry profile space bars.
Post by: Kerasan on Tue, 08 October 2019, 22:49:55
Color choise: rose gold, Gray, purple
Did you think about making anodizations like in the keyboard gb you designed?
Post by: CF73 on Wed, 09 October 2019, 07:01:12
Would you offer a non-hollow version (or at least prototype and sound test it)? Some people like to stuff the inside of the spacebars with foam and the like, but it'd definitely be interesting to see a filled spacebar with just aluminum.
+1 for this, I'm assuming it'll also reduce the cost since less machining is required?
I'd be in for 6.25u alu in purple and white.
Post by: KingOfMemes on Wed, 09 October 2019, 08:17:24
A Non-hollow option would be tight. Would that cost more or less than a holo version? The obvious guess is more because more material, but I'm wondering if machining costs would be less since it would just be a flat cut along the bottomWould you offer a non-hollow version (or at least prototype and sound test it)? Some people like to stuff the inside of the spacebars with foam and the like, but it'd definitely be interesting to see a filled spacebar with just aluminum.
+1 for this, I'm assuming it'll also reduce the cost since less machining is required?
I'd be in for 6.25u alu in purple and white.
Post by: rockydbull on Wed, 09 October 2019, 09:42:50
Post by: CF73 on Wed, 09 October 2019, 23:59:48
A Non-hollow option would be tight. Would that cost more or less than a holo version? The obvious guess is more because more material, but I'm wondering if machining costs would be less since it would just be a flat cut along the bottomWould you offer a non-hollow version (or at least prototype and sound test it)? Some people like to stuff the inside of the spacebars with foam and the like, but it'd definitely be interesting to see a filled spacebar with just aluminum.
+1 for this, I'm assuming it'll also reduce the cost since less machining is required?
I'd be in for 6.25u alu in purple and white.
I could be wrong, but the material cost would be the same considering that the piece of aluminum to be machined from is the same in size. Just extra machine work to trim down the interior of the keycap for hollow ones. (It'd be a different story for 3d printing since that's an additive process, where more material = higher cost).
Also, non-hollow caps may need some tweaks with switch/stab clearance around the mounting positions. :rolleyes:
Post by: ItszBrian on Thu, 10 October 2019, 03:49:37
Post by: Gondolindrim on Mon, 14 October 2019, 19:11:08
I really like 1 (cyan) ,4 (red) ,5 (purple), and 6 (pink). Although I might only get two colors if the group buy happens soon.
I really like the blues and the golden keycaps.
Post by: langstonhuge on Mon, 14 October 2019, 19:16:46
Post by: Steezus on Mon, 14 October 2019, 19:48:51
Post by: alanskiii on Mon, 14 October 2019, 21:33:38
Sent from my iPhone using Tapatalk
Post by: RETURNISO on Tue, 15 October 2019, 07:44:36
Post by: Kerasan on Sat, 19 October 2019, 11:44:11
Post by: lolafineday on Sat, 19 October 2019, 12:45:42
Sent from my SM-G975F using Tapatalk
Post by: noorejji on Wed, 30 October 2019, 14:36:57
Post by: Chris_der_Baer on Thu, 07 November 2019, 10:05:43
Post by: nathanchere on Thu, 07 November 2019, 17:10:41
Post by: VictorMTB on Thu, 07 November 2019, 17:30:14
Did this get shelved?
No sir ! We're working overtime to get our honeyboard cases out first. We plan to hopefully start gb early december. We're really excited to start this project!
Any news?
Post by: AdrianMan on Fri, 08 November 2019, 12:21:28
Post by: HOBI3CAT on Mon, 11 November 2019, 09:18:23
Post by: alanskiii on Sun, 29 December 2019, 04:57:58
Sent from my iPhone using Tapatalk
Post by: Shutter_Shock on Sun, 29 December 2019, 08:32:00
I agree that I wouldn't mind paying $40 instead of $30 if it means better finishing. Will the plain polished aluminum and brass be raw? It would be nice to see PVD coating on the polished ones.
Post by: gamerman on Sun, 29 December 2019, 18:34:10
Post by: nathanchere on Thu, 02 January 2020, 07:44:13
Did this get shelved?
No sir ! We're working overtime to get our honeyboard cases out first. We plan to hopefully start gb early december. We're really excited to start this project!Any news?
Happy to hear that. Both that it's still happening and the attitude of honoring prior commitments before starting new projects.
Post by: Chris_der_Baer on Wed, 18 March 2020, 17:02:59
Post by: alanskiii on Wed, 18 March 2020, 17:04:28
Sent from my iPhone using Tapatalk
Post by: subluxe on Thu, 19 March 2020, 13:06:20
Post by: Top Right Logo on Thu, 19 March 2020, 14:07:23
Post by: Techichi on Fri, 19 June 2020, 16:11:38
Post by: syke on Sat, 20 June 2020, 08:38:08
Post by: froueloop on Sat, 20 June 2020, 20:49:51
Post by: dstaar on Sat, 20 June 2020, 21:26:07
Post by: KeebCalmAndCarryOn on Thu, 02 July 2020, 07:54:44
Post by: Anthixious on Sat, 08 August 2020, 03:20:54
Post by: ItszBrian on Wed, 17 February 2021, 14:06:37