Post your G80-1800 pictures

[yomammary]

why didn't you go red green blue on the LEDs o.o

1800 has always had a special place in my heart tho.

I'll change them

Show Image

Happy?

Thanks to slickmamba for doing all the hard work :)
First real soldering job for me.

That's a very interesting mod layout :) in a good way

They're the ones I use most and I'll use it at home so it made sense for me. JigOn was really easy to use to remap keys too.

[3K]

why didn't you go red green blue on the LEDs o.o

1800 has always had a special place in my heart tho.

I'll change them

Show Image

Happy?

Thanks to slickmamba for doing all the hard work :)
First real soldering job for me.

That's a very interesting mod layout :) in a good way

They're the ones I use most and I'll use it at home so it made sense for me. JigOn was really easy to use to remap keys too.

How did you do the mods? Would love to mod my WK 1800 to WKL.

[demik]

I forgot I had a leeku 1800 kit OuO

[digi]

I forgot I had a leeku 1800 kit OuO

Solder that bad boy together son!

[mason]

How did you do the mods? Would love to mod my WK 1800 to WKL.

This might help https://geekhack.org/index.php?topic=62638.0

That's how my WK 1800 became a WKL one

[demik]

I forgot I had a leeku 1800 kit OuO

Solder that bad boy together son!

need switches and i think stabs

[alienman82]

removed.

[yomammary]

why didn't you go red green blue on the LEDs o.o

1800 has always had a special place in my heart tho.

I'll change them

Show Image

Happy?

Thanks to slickmamba for doing all the hard work :)
First real soldering job for me.

That's a very interesting mod layout :) in a good way

They're the ones I use most and I'll use it at home so it made sense for me. JigOn was really easy to use to remap keys too.

How did you do the mods? Would love to mod my WK 1800 to WKL.

The latest Leeku 1800 PCB has all the right different holes for WK or WKL.

[Bromono]

I forgot I had a leeku 1800 kit OuO

D= you hates cherry lets me trades for it.

[henz]

I forgot I had a leeku 1800 kit OuO

Solder that bad boy together son!

need switches and i think stabs

ill sell you some switches

[jerue]

more 1800 love!

Just me, dolchin' around

[katushkin]

more 1800 love!

Just me, dolchin' around

Show Image

Is that GMK Dolch on an OG Dolch boardd? Where are your OG caps???  >:D

[jerue]

more 1800 love!

Just me, dolchin' around

Show Image

Is that GMK Dolch on an OG Dolch boardd? Where are your OG caps???  >:D

OnO

just cyan keys where ya see them, everything else is OG :P

[ramnes]

more 1800 love!

Just me, dolchin' around

Show Image

purdy

[quochung1989]

more 1800 love!

Just me, dolchin' around

Show Image

Nice job! Look great :D
Do you use Leeku for it? I only guess when I see cable at center position :)

[jerue]

more 1800 love!

Just me, dolchin' around

Show Image

Nice job! Look great :D
Do you use Leeku for it? I only guess when I see cable at center position :)

Thanks!

nope, it's still using the original motherboard with PS/2 connector. It's that little bit of white sticking out the left side; I just leave the usb cable in the middle since that's for my realforce :)

[quochung1989]

more 1800 love!

Just me, dolchin' around

Show Image

Nice job! Look great :D
Do you use Leeku for it? I only guess when I see cable at center position :)

Thanks!

nope, it's still using the original motherboard with PS/2 connector. It's that little bit of white sticking out the left side; I just leave the usb cable in the middle since that's for my realforce :)

Oh ok. I see :)

[VesperSAINT]

Wowzas ~ I missed even more 1800 action in here. I'm so happy 1800's are catching on.

1800 is love. 1800 is life.

Just a random 1800 theme I did for fun Bluegaloo fungaloo <3

[alienman82]

removed.

[VesperSAINT]

what happened to the bbv2 

It was the first doubleshot V2 Bro Caps made (VS Purple) and one of his eyes were drilled for the sake of science to prove the doubleshot.

It's all a part of Bro Caps history

[alienman82]

removed.

[katushkin]

more 1800 love!

Just me, dolchin' around

Show Image

Is that GMK Dolch on an OG Dolch boardd? Where are your OG caps???  >:D

OnO

just cyan keys where ya see them, everything else is OG :P

Good ^_^ <3

[iamtootallforthis]

what happened to the bbv2 

It was the first doubleshot V2 Bro Caps made (VS Purple) and one of his eyes were drilled for the sake of science to prove the doubleshot.

It's all a part of Bro Caps history

Show Image

Nice pair!

[VesperSAINT]

Nice pair!

    thanx bruh <3

[iamtootallforthis]

Nice pair!

Show Image

    thanx bruh <3

 ;)

[Khers]

.

[StormyMonday]

 

I just never get tired of looking at these 1800's.

[alienman82]

removed.

[Khers]

.

[alienman82]

removed.

[Khers]

.

[alienman82]

removed.

[StormyMonday]

No, the mini USB port fits completely inside of the case and it does not interfere with anything. You can solder your USB cable to the PCB and you're good to go.

[alienman82]

removed.

[VesperSAINT]

Can confirm. It closes perfectly after soldering in cable, and the USB hub doesn't interfere at all with the G81-1800 case.

The cable, you just need to reroute using the upper space in the case.

However, I did mine awhile back and was using the first/early generation of Leeku PCB, unlike the new ones ppl are using now.

This one uses the Beast plate, and I had to dremel the case to fit the plate though.

[alienman82]

removed.

[SixtyLife]

Wowzas ~ I missed even more 1800 action in here. I'm so happy 1800's are catching on.

1800 is love. 1800 is life.

Just a random 1800 theme I did for fun Bluegaloo fungaloo <3

Show Image

Show Image

Show Image

I finally finished this yesterday:

Show Image

Show Image

Bit of a Frankenboard; case and caps are from a G81 (notably all caps on the four upper rows are D-profile), switches are from an old 1800HAD (lubed and spring swapped to 62g - smooth as butter) and the PCB is a Leeku.

Unfortunately, the cap donor was two caps short. I didn't think this would be a problem until I realized it had all-D-profile on the top four rows, meaning that I came up empty trying to find suitable caps for page up and print screen. Bummer.

Show Image

never liked the electric bugaloo mod set til I saw these two boards.. looks perfect on the beige 1800

[StormyMonday]

The 1800s look great with just about any caps. Somehow even the classic white/beige caps fail to look boring on these boards. The possible exception is black caps on a black case ... which is why you haven't seen any pics of my 1800. I had my heart set on SoWaRe, but perhaps something else will come along ...

[merlin64]

I'll be joining this awesome club momentarily. I just got all the parts!

I'm putting a Leeku 1800 with plate in a G81-1800 case. How did those of you with the similar setup route the cable? Did you

1. Cut a hole in the middle to use the mini B on the PCB
2. Solder a USB A cable to the 4 pins above the F6 key
3. Some other way

I'm trying to figure out a way to put a detachable cable on without cutting too many holes in the case.

[StormyMonday]

I'll be joining this awesome club momentarily. I just got all the parts!

I'm putting a Leeku 1800 with plate in a G81-1800 case. How did those of you with the similar setup route the cable? Did you

1. Cut a hole in the middle to use the mini B on the PCB
2. Solder a USB A cable to the 4 pins above the F6 key
3. Some other way

I'm trying to figure out a way to put a detachable cable on without cutting too many holes in the case.

My board doesn't travel, so having a detachable cable was not a priority. I soldered the USB cable directly to the PCB and routed the cable along the same path as the AT cable.

[alienman82]

removed.

[StormyMonday]

I'll be joining this awesome club momentarily. I just got all the parts!

I'm putting a Leeku 1800 with plate in a G81-1800 case. How did those of you with the similar setup route the cable? Did you

1. Cut a hole in the middle to use the mini B on the PCB
2. Solder a USB A cable to the 4 pins above the F6 key
3. Some other way

I'm trying to figure out a way to put a detachable cable on without cutting too many holes in the case.

My board doesn't travel, so having a detachable cable was not a priority. I soldered the USB cable directly to the PCB and routed the cable along the same path as the AT cable.

Vespersaint told me that you can fit the pcb inside the case without modifying, there is also a labled spot to solder a USB cable   That should work fine for you.

Correct. The PCB fits inside of the case, with no interference, even if you don't cut the case for the mini USB port. You can cut a hole in the case and use the mini USB connector that is on the PCB, or you can solder the cable directly to the PCB. Either way works

[VesperSAINT]

god that is a lovely pic.  I'm gonna build a similar one once I get back home. I already got all the parts

Yeee. I can't wait to see you have it completed. We can be 1800 twinsies, m8 <3

never liked the electric bugaloo mod set til I saw these two boards.. looks perfect on the beige 1800

Thank you for the kind words ~ I shall attempt to come up with something prettier for the future so I can have everyone embrace the beauty of beige and Blugaloo! Hehe.

Vespersaint told me that you can fit the pcb inside the case without modifying, there is also a labled spot to solder a USB cable   That should work fine for you.

Correct. The PCB fits inside of the case, with no interference, even if you don't cut the case for the mini USB port. You can cut a hole in the case and use the mini USB connector that is on the PCB, or you can solder the cable directly to the PCB. Either way works

[appleonama]

I'll be joining this awesome club momentarily. I just got all the parts!

I'm putting a Leeku 1800 with plate in a G81-1800 case. How did those of you with the similar setup route the cable? Did you

1. Cut a hole in the middle to use the mini B on the PCB
2. Solder a USB A cable to the 4 pins above the F6 key
3. Some other way

I'm trying to figure out a way to put a detachable cable on without cutting too many holes in the case.

you and me buddy.

although I am not sure what case to put it inside and what switches to use.

I have dolch and g80 case
switches gateron blacks and ergo mx grey

[demik]

I'll be joining this awesome club momentarily. I just got all the parts!

I'm putting a Leeku 1800 with plate in a G81-1800 case. How did those of you with the similar setup route the cable? Did you

1. Cut a hole in the middle to use the mini B on the PCB
2. Solder a USB A cable to the 4 pins above the F6 key
3. Some other way

I'm trying to figure out a way to put a detachable cable on without cutting too many holes in the case.

you and me buddy.

although I am not sure what case to put it inside and what switches to use.

I have dolch and g80 case
switches gateron blacks and ergo mx grey

g80

dolch case is horribly ugly

[appleonama]

I'll be joining this awesome club momentarily. I just got all the parts!

I'm putting a Leeku 1800 with plate in a G81-1800 case. How did those of you with the similar setup route the cable? Did you

1. Cut a hole in the middle to use the mini B on the PCB
2. Solder a USB A cable to the 4 pins above the F6 key
3. Some other way

I'm trying to figure out a way to put a detachable cable on without cutting too many holes in the case.

you and me buddy.

although I am not sure what case to put it inside and what switches to use.

I have dolch and g80 case
switches gateron blacks and ergo mx grey

g80

dolch case is horribly ugly

Now that I think about it I agree but the caps on my g80 are so crappy  dolch caps on g80?

[VesperSAINT]

dolch caps on g80?

Do it. Never look back. Get me jealous with your photos when it happens.

R.I.P. Vesper 2K16.

[demik]

I'll be joining this awesome club momentarily. I just got all the parts!

I'm putting a Leeku 1800 with plate in a G81-1800 case. How did those of you with the similar setup route the cable? Did you

1. Cut a hole in the middle to use the mini B on the PCB
2. Solder a USB A cable to the 4 pins above the F6 key
3. Some other way

I'm trying to figure out a way to put a detachable cable on without cutting too many holes in the case.

you and me buddy.

although I am not sure what case to put it inside and what switches to use.

I have dolch and g80 case
switches gateron blacks and ergo mx grey

g80

dolch case is horribly ugly

Now that I think about it I agree but the caps on my g80 are so crappy  dolch caps on g80?

bro, dolch caps on a g80 is probably the best combo.

[demik]

vesp beat me to it.. but yeah, best combo NA

[appleonama]

More

dolch caps on g80?

Do it. Never look back. Get me jealous with your photos when it happens.

Show Image

R.I.P. Vesper 2K16.

More

I'll be joining this awesome club momentarily. I just got all the parts!

I'm putting a Leeku 1800 with plate in a G81-1800 case. How did those of you with the similar setup route the cable? Did you

1. Cut a hole in the middle to use the mini B on the PCB
2. Solder a USB A cable to the 4 pins above the F6 key
3. Some other way

I'm trying to figure out a way to put a detachable cable on without cutting too many holes in the case.

you and me buddy.

although I am not sure what case to put it inside and what switches to use.

I have dolch and g80 case
switches gateron blacks and ergo mx grey

g80

dolch case is horribly ugly

Now that I think about it I agree but the caps on my g80 are so crappy  :'( dolch caps on g80?

bro, dolch caps on a g80 is probably the best combo.

Show Image

you guys are right