MoreKeycool 87 switch swap and mod
KBT Oni switch swap and mod
Ducky DK1087 switch swap and mod
Mxmini repair
Poker I fit beast plate
Poker II Switch swap and fit into Poker 1 Accrylic case
Kmac mini switch swap
38GT full build (incl SMD)
GH60 full build and programming etc.
Duck v1.5 full build
LZGH Full build
Ergodox full build (incl SMD)
Ergodox full build (incl SMD)
Ergodox full build (incl SMD)
Ergodox full build (incl SMD)
Ergodox full build (incl SMD)
Ergodox full build (incl SMD)
Ergodox partial repair and finished build
WASD 104 switch swap
WASD 105 switch swap
G80-3700 PCB repair
Filco switch swap
Filco cable swap
Cougar attack LED mod
LZGH Switch repair
Poker II switch swap, lube and LED mod
KMAC Happy strip for case re-anodising
A.87 ps2avr - controller and SMD soldering
GON ISO HHKB
Filco Switch Swap
OTD 360c
I've stripped more donor boards than I care to remember and I have likely done more things than above but that's all I can remember
To do/return List:
To do: (in no specific order)
Build Longweight GON
Build Margo GON
Filco switch clean
Service/cap swap 16x8x4 mixer (gonna take an age!)
Service/cap swap vintage trace and elliot bass head
Done:MoreBuild Bunny 360Build JaccoW OrionBuild Dustin's GONGK's A.87 - SMD work, diodes, resistors - all SMD work complete - posting 11/04/2014Ergodox - received 11/4/2014Skidata - strip all switches and stabs - received 9/4/2014Leo numpad - swap switches to clears - received 9/4/2014 - stripped 10/4/2014Goldtouch numpad - remove brown switches - this is mine, so whenever :)CM TK - swap 4 switches - recieved 10/04/2014 - posted 11/04/2014KMAC Happy - Remove plate - Posted 19/03/2014My monitor - Swap all 40 odd caps for new high quality caps - waiting on parts - DONE Monitor fixed :D 15/03/2014Mod WASD 105 browns to clears - done - post back Friday 28.02.2014ErgoDox - Completed - posted Thursday 12.02.2014Poker2 switch swap and fit LEDs - This is my board, so to be completed when I find the time!Post WASD 104 back to USA - Posted Friday 07.02.2014Post back G80-3700 - Posted Monday 10.02.2014GH60 repaired - Drop back Monday 10.02.2014
Are there any previous mods you've worked on that you can show us? Or maybe some previous customers that could chime in? Not that I doubt your abilities, it would just be nice to see your handiwork.
Jesus.. Those are some really great prices.
I actually had to do a double take when I first read them. They are ridiculously low.Jesus.. Those are some really great prices.
we aim to please
Nice prices, welcome Margo!
let's see some joints! ;)
Ctrl-Alt-Store really making some improvements as of recent, great work guys
I'd trust Margon to assemble my children.
Do you have any experience assemblying A87 PCB's? (by OTD)
I have the bare pcb and the normal assorted stuff that needs to be soldered on, but I am not sure if resistors or anything else is included. Do you have switches and LED's on hand? I am curious as to how much they would be in addition as shipping would be cheaper (I believe) >.<
Kind of don't want to ruin my pcb with my noobiness.
In other words, how much would it be to assemble a pcb with all soldering needed in addittion to switches and LED's
It looks like the prices are in USD. These are the best prices I have seen so far!
After more consideration, would it be better to order a 105 key board and then buy 110 clear switches from http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=597 and send them straight to you so you could do a straight swap?
Awesome! I am thinking a wasd V2 with reds, because that's all they have in stock, but are there any boards you would recommend? Or any that would make your job easier? Because I don't want to choose a board that is going to be a pain for you to work with.
After more consideration, would it be better to order a 105 key board and then buy 110 clear switches from http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=597 and send them straight to you so you could do a straight swap?
Working on a pretty board at the moment :)No idea about the others but i personally can't wait :D
Build log, pictures, fun stuff in the next few days.
Do you do lube switches as well?
Fun evening building lzgh, well evening, it took me 1.5 hours tops.
40% to play with overnight till I take this all back tomorrow, not mine and lzgh also not mine :D
(http://i13.photobucket.com/albums/a258/lymph/IMG_2481_zps7f916809.jpg) (http://s13.photobucket.com/user/lymph/media/IMG_2481_zps7f916809.jpg.html)
Prices slightly revised and updated - have invested a fair amount in my equipment over the last month so is just due to that really. I still think they are very fair.
Prices slightly revised and updated - have invested a fair amount in my equipment over the last month so is just due to that really. I still think they are very fair.
Fair?
If I lived in the UK, it would be so fair, I would be sending you a new keyboard every week to mod!!!!
(Luckily, I do not live in the UK, and since shipping to and fro would cost me at least a hundred per keyboard, I am not going to go down that slippery path. Whew!)
Poor bunny. I imagine he's bought way more keyboards than he should thanks to your very affordable services.
Prices slightly revised and updated - have invested a fair amount in my equipment over the last month so is just due to that really. I still think they are very fair.
Fair?
If I lived in the UK, it would be so fair, I would be sending you a new keyboard every week to mod!!!!
(Luckily, I do not live in the UK, and since shipping to and fro would cost me at least a hundred per keyboard, I am not going to go down that slippery path. Whew!)
Poor bunny. I imagine he's bought way more keyboards than he should thanks to your very affordable services.
A little further up the page there are photo's of a keypad repair if that helps?
A little further up the page there are photo's of a keypad repair if that helps?
you mean the numpad thing with the black-and-white cable thingy?
it looked a lot like a squid. Not being technically trained I didn't understand the photo at all. The problem I have looks quite different, including what seems to be a destroyed solder pad.
woah, can't wait to get my hands on that Dox, looks great man good job! :)
Edit:
Got my Dox back yesterday, Margo did a great job and everything is working great! Would definitely recommend his services ;)
I loved building my dox. It's a fun project :)
I loved building my dox. It's a fun project :)
I've never built one for myself :P
I have never built myself any boards from scratch...PITY ME!
Just got my WASD through today after four months of waiting (nothing to do with Margo!) and it is amazing. The clears feel incredible, it looks amazing, and there is nothing to show it's been changed at all!
I want to say that Margo is a really friendly guy, with quick responses and was able to change everything I wanted at a moments notice.
Would be my first point of call for any mods/build ever. 11/10.
<3
I loved building my dox. It's a fun project :)
I've never built one for myself :P
I have never built myself any boards from scratch...PITY ME!
FINALLY some more projects :)
(http://i13.photobucket.com/albums/a258/lymph/IMG_2693_zps8d5b2c77.jpg) (http://s13.photobucket.com/user/lymph/media/IMG_2693_zps8d5b2c77.jpg.html)
This guy is going to have a custom board (eventually, need case)
Have a monitor to replace all the caps on too, but I am waiting for those to arrive.
FINALLY some more projects :)
(http://i13.photobucket.com/albums/a258/lymph/IMG_2693_zps8d5b2c77.jpg) (http://s13.photobucket.com/user/lymph/media/IMG_2693_zps8d5b2c77.jpg.html)
This guy is going to have a custom board (eventually, need case)
Have a monitor to replace all the caps on too, but I am waiting for those to arrive.
what pcb is this ? ;D
Soldered up my A.87 - this time without breaking the Atmega32 :D
(http://i13.photobucket.com/albums/a258/lymph/IMG_2711_zps4c72e9c8.jpg) (http://s13.photobucket.com/user/lymph/media/IMG_2711_zps4c72e9c8.jpg.html)
You are insane i am jelly of your skills!Show ImageShow ImageShow ImageShow ImageSoldered up my A.87 - this time without breaking the Atmega32 :D
(http://i13.photobucket.com/albums/a258/lymph/IMG_2711_zps4c72e9c8.jpg) (http://s13.photobucket.com/user/lymph/media/IMG_2711_zps4c72e9c8.jpg.html)
Except that brought it's own problems - in that the spare Atmega's I have have zero firmware on them, and the one I broke, was preflashed.
because i'm a nerd I have an arduido, prototyping wire and sil sockets laying about
Soldered sil sockets to ISP2
(http://i13.photobucket.com/albums/a258/lymph/IMG_2712_zpsdb271b6b.jpg) (http://s13.photobucket.com/user/lymph/media/IMG_2712_zpsdb271b6b.jpg.html)
Arduido time! While the arduino does ship with a sketch for ISP, it took me AGES to work out some of the variables for my uno
(http://i13.photobucket.com/albums/a258/lymph/IMG_2713_zps53ac3dec.jpg) (http://s13.photobucket.com/user/lymph/media/IMG_2713_zps53ac3dec.jpg.html)
Arduino getting it's flash on, it's handy having the TX RX LEDs on the board
(http://i13.photobucket.com/albums/a258/lymph/IMG_2714_zpse7a01a48.jpg) (http://s13.photobucket.com/user/lymph/media/IMG_2714_zpse7a01a48.jpg.html)
SIL sockets with proto wire
(http://i13.photobucket.com/albums/a258/lymph/IMG_2715_zpsa0eba9fb.jpg) (http://s13.photobucket.com/user/lymph/media/IMG_2715_zpsa0eba9fb.jpg.html)
these are the commands I used:
wake it up:
avrdude -c avrisp -P com3 -p atmega32 -U hfuse:w:0xD0:m -U lfuse:w:0x0F:m -b 19200
Backup hex from atmega32:
avrdude -p atmega32 -P com3 -c avrisp -b 19200 -U flash:r:backup.hex:i
Flash hex:
avrdude -p atmega32 -P com3 -c avrisp -b 19200 -U flash:w:backup.hex:i
Those commands might be a bit different for you depending on your set up and what you are using as an isp - took me ages to get a value for -b that worked.
I loved building my dox. It's a fun project :)
I've never built one for myself :P
I have never built myself any boards from scratch...PITY ME!
Am amazed, Margo! I would have thought pcbs were your daily bread and lube your daily butter...
Btw after we talked, I wanted to send you my stuff for modding, but I delayed because I was trying to make my own jailhouse blues. And didn't succeed.
I'm still figuring out what I really want to do with my stuff. You know, whether to do ergo clears, ghetto greens, or something.
But I promise you, I'll send you once I figure things out! And you'll get that Tg3 to play with and the WYSE keycaps and all that! i really do want my stuff to get modded by your expert hands; better than things fall apart in my less-than-expert hands...
I really enjoy following this thread and seeing your work Margo -- which is really nice BTW. :thumb:
GK's A87 is done :)
(http://i13.photobucket.com/albums/a258/lymph/DSC05607_zpsaf951a3e.jpg) (http://s13.photobucket.com/user/lymph/media/DSC05607_zpsaf951a3e.jpg.html)
Wow, the white pcb looks really good.
May I ask what did you use to clean it tho ? ;D
Wow, the white pcb looks really good.
May I ask what did you use to clean it tho ? ;D
(http://i13.photobucket.com/albums/a258/lymph/IMG_2705_zps68e41e31.jpg) (http://s13.photobucket.com/user/lymph/media/IMG_2705_zps68e41e31.jpg.html)
:thumb:
Ah alright. Do you think 99% isopropyl alcohol will cut it ?IPA doesn't do much against the flux in the solder that I'm sending you.
or it's a bad idea. Cause I'll doing some soldering on my own and my pcb is white. ;)
Yeah I never had much luck with IPA. In the above picture, the bright spark stuff is rubbish, that doesn't really clean flux residue, the stuff on the right in the green and white can is really good and was only about £7 I think. I have barely used any of the can and I've cleaned loads of boards with it.
Looks like that product is limited to the UK, but I'm curious how you use it. How is it applied and removed?
Filled my own solder paste syringe today as I've found a supplier for paste in larger quantities, the top syringe is what I have been using, the bottom one is the one I filled this evening, and has cost me just over a quarter the price of the top one, and it's quite a lot bigger. I can just about do this cheaply enough to sell prefilled syringes but I don't know if there is demand for it as I don't know how many people are soldering SMD on air! I'm happy I've found a much cheaper source, is 63/37 blend, real joy to use as well.
don't understand a word of what you're saying and I still can't tell the dif between SMD and flux. But whatever, heh, thanks to you I've started watching UK ebay auctions because I can always buy and send you something to mod!
I think Mr Baggins just got my project in the post :D I'm so excited :D
JaccoW -
(http://i13.photobucket.com/albums/a258/lymph/DSC05639_zpsb4e3acb4.jpg) (http://s13.photobucket.com/user/lymph/media/DSC05639_zpsb4e3acb4.jpg.html)
JaccoW -
(http://i13.photobucket.com/albums/a258/lymph/DSC05639_zpsb4e3acb4.jpg) (http://s13.photobucket.com/user/lymph/media/DSC05639_zpsb4e3acb4.jpg.html)
Show ImageShow ImageJaccoW -
(http://i13.photobucket.com/albums/a258/lymph/DSC05639_zpsb4e3acb4.jpg) (http://s13.photobucket.com/user/lymph/media/DSC05639_zpsb4e3acb4.jpg.html)
(http://i13.photobucket.com/albums/a258/lymph/DSC05645_zps0d99037e.jpg) (http://s13.photobucket.com/user/lymph/media/DSC05645_zps0d99037e.jpg.html)
surprise:
(http://i13.photobucket.com/albums/a258/lymph/DSC05663_zps58090e4c.jpg) (http://s13.photobucket.com/user/lymph/media/DSC05663_zps58090e4c.jpg.html)
Show ImageShow ImageJaccoW -
(http://i13.photobucket.com/albums/a258/lymph/DSC05639_zpsb4e3acb4.jpg) (http://s13.photobucket.com/user/lymph/media/DSC05639_zpsb4e3acb4.jpg.html)
(http://i13.photobucket.com/albums/a258/lymph/DSC05645_zps0d99037e.jpg) (http://s13.photobucket.com/user/lymph/media/DSC05645_zps0d99037e.jpg.html)
surprise:
(http://i13.photobucket.com/albums/a258/lymph/DSC05663_zps58090e4c.jpg) (http://s13.photobucket.com/user/lymph/media/DSC05663_zps58090e4c.jpg.html)
Is the surprise that the numpad is now upside down?!?!
Show ImageShow ImageJaccoW -
(http://i13.photobucket.com/albums/a258/lymph/DSC05639_zpsb4e3acb4.jpg) (http://s13.photobucket.com/user/lymph/media/DSC05639_zpsb4e3acb4.jpg.html)
(http://i13.photobucket.com/albums/a258/lymph/DSC05645_zps0d99037e.jpg) (http://s13.photobucket.com/user/lymph/media/DSC05645_zps0d99037e.jpg.html)
surprise:
(http://i13.photobucket.com/albums/a258/lymph/DSC05663_zps58090e4c.jpg) (http://s13.photobucket.com/user/lymph/media/DSC05663_zps58090e4c.jpg.html)
Is the surprise that the numpad is now upside down?!?!
Is the surprise that the numpad is now upside down?!?!
Show ImageShow ImageJaccoW -
(http://i13.photobucket.com/albums/a258/lymph/DSC05639_zpsb4e3acb4.jpg) (http://s13.photobucket.com/user/lymph/media/DSC05639_zpsb4e3acb4.jpg.html)
(http://i13.photobucket.com/albums/a258/lymph/DSC05645_zps0d99037e.jpg) (http://s13.photobucket.com/user/lymph/media/DSC05645_zps0d99037e.jpg.html)
surprise:
(http://i13.photobucket.com/albums/a258/lymph/DSC05663_zps58090e4c.jpg) (http://s13.photobucket.com/user/lymph/media/DSC05663_zps58090e4c.jpg.html)
Is the surprise that the numpad is now upside down?!?!
i think the surprise is that he hoodwinked some of my switch stickers haha
Is the surprise that the numpad is now upside down?!?!
i picked you up an alps 60% pcb sirI want to see this pls :O
Show ImageShow ImageJaccoW -
(http://i13.photobucket.com/albums/a258/lymph/DSC05639_zpsb4e3acb4.jpg) (http://s13.photobucket.com/user/lymph/media/DSC05639_zpsb4e3acb4.jpg.html)
(http://i13.photobucket.com/albums/a258/lymph/DSC05645_zps0d99037e.jpg) (http://s13.photobucket.com/user/lymph/media/DSC05645_zps0d99037e.jpg.html)
surprise:
(http://i13.photobucket.com/albums/a258/lymph/DSC05663_zps58090e4c.jpg) (http://s13.photobucket.com/user/lymph/media/DSC05663_zps58090e4c.jpg.html)
Is the surprise that the numpad is now upside down?!?!
i think the surprise is that he hoodwinked some of my switch stickers haha
No hoodwinking :P they my ones :DIs the surprise that the numpad is now upside down?!?!
You win the prize :) I realised that after I took the picture hehe
Hi margo.
I'd like that you modded my CM QuickFire Tk Stealth, installing full led: can we talk about it? Maybe by PM?
In case, did you ever do such a mod on a Stealth/Ninja/any-kb-with-blank-caps?
I'm asking you so, as I'm looking for pics to evaluate the final result with not so backlit friendly keycaps, as the Stealth ones are (or I expect they are).
Thanks in advance and best regards!
I prefer solid caps over a backlight, give a sort of under glow that I think is nice.
I prefer solid caps over a backlight, give a sort of under glow that I think is nice.
Dear margo, first of all thanks for your kind answer: I appreciate so much your willingness.
Whether your tries won't be satisfactory, which could the alternatives be? My Tk has the IT layout, and I'm unable to source any compact brown/crystal/green-switch equipped kb with IT layout.
At any rate, my primary concern is to somehow improve the keyboard readability at night, as that's mainly what currently I don't like of this keyboard. So, if glowing in the dark will suffice, then I'd be happy with it.
quest for silence, let me suggest this source so kindly recommended by sonic revolution and Ivan Ivanovich: xkeys
Price isn't great but it's not too exorbitant either, at $5 per 10 keys.
You can make your own legends and stick them under the relegendable cover.
quest for silence, let me suggest this source so kindly recommended by sonic revolution and Ivan Ivanovich: xkeys
Price isn't great but it's not too exorbitant either, at $5 per 10 keys.
You can make your own legends and stick them under the relegendable cover.
Thanks for your advice: just to be sure, are you talking about these ones (http://www.keyboardspecialists.co.uk/5093-x-keys-transparent-10-x-single-key-caps-for-xk-series) (it's the only source I found, at about 1$ per key), aren't you?
Yo Margo.
Quick check, was all my stuff present and correct (bar the SMDs we discussed). Any issues that I need to fix?
(http://i13.photobucket.com/albums/a258/lymph/ctrl-caps_zps98de34e2.jpg) (http://s13.photobucket.com/user/lymph/media/ctrl-caps_zps98de34e2.jpg.html)By looking at the pics i can't quite get what exactly you did to the traces. Can you enlighten me please? :D
Quick mod!
Swapped ctrl and caps on my work keyboard. destructive mod :) no turning back haha.
(http://i13.photobucket.com/albums/a258/lymph/ctrl-caps-edit_zps9d07b52b.jpg) (http://s13.photobucket.com/user/lymph/media/ctrl-caps-edit_zps9d07b52b.jpg.html)Ah that makes so much more sense now ahah :D
I just cut through the traces where indicated above in the orange circles, I then did wire's where I wanted the signal to go
I slipped when I did the first one, top left :P is why my cut is so long, I did that one first though as there was the most amount of space around it for potential slips, that did happen :D
Can she do that? Just evict you on such short notice?
Good luck Margon, I hope you and your roommate manage to find a place again soon. :)
Tsk tsk :PCan she do that? Just evict you on such short notice?
Good luck Margon, I hope you and your roommate manage to find a place again soon. :)
Oh I forgot about you! Do you know how long your Orion is going to be? If you get it to me before I move I can still sort that for you prior to moving house.
Tsk tsk :PCan she do that? Just evict you on such short notice?
Good luck Margon, I hope you and your roommate manage to find a place again soon. :)
Oh I forgot about you! Do you know how long your Orion is going to be? If you get it to me before I move I can still sort that for you prior to moving house.
I don't know. I should be getting it in a few weeks but I wasn't in the first batch... :(
When parts do start turning up I will contact you. :)
Important notice - I am not going to be taking any work on for a few months now - I will get finished what I have and get that sent back to people ASAP - with the exception of beserkerfans stuff that hasn't yet arrived from the otherside of the globe, but I've PM'd him. I've had a rather stressful week which has now culminated in me and my housemates being evicted from our house, due to no fault of our own but the landlady wants her house back to renovate and let out to a family. I have to move out/find a new place and be moved by the end of June, so I imagine the next 8 - 10 weeks are going to be rather stressful and annoying - once I have got a new roof over my head I will open my doors again.
Hello
The TK Stealth - while it does have the holes for LEDs on the pcb, it doesn't have any hardware on the pcb to support LEDs. I have a TK stealth, so I would need to test if just soldering in a resistor and an LED will make it work. I think it might not, but it's worth a try. I won't have any time to do this until the weekend though I don't think, as I have a couple of projects to get finished and posted and a busy week at work! But I will get it done at teh weekend and let you know :) I did have the pcb out of this board once before to look at this very proposal, but I can't remember what I decided so will have to give it another look.
I prefer solid caps over a backlight, give a sort of under glow that I think is nice.
Any news, Margo?
Good to hear Margo :)
I was wondering if you were still alive as you haven't been very active on BT either.
Like I told you there, take your time, I know what a pain moving places can be. I've moved 9 times in my life so far and I haven't even reached 30 yet. :P
I am really looking forward to see what you have done so far and I will be in touch for the final details regarding the Orion. You should have all the parts needed. :)
Hope your situation is brightening up bro! I am new here so just browsing the forum like a good little nerd and came across your thread. Love the work you do, I am sure if I bugger up the stuff I am planning on doing when my Poker II arrives this week I can bring it to you when you are sorted. I am just down the road from Brighton!
Anyway I look forward to more updates in this thread of your work :thumb:
Hello - I haven't been able to have a look yet :( My TK is my work keyboard so it's often just in my office - andI have zero free time at the moment as I am packing all my stuff up and I have a few things on with work at the moment. I will try bring my TK back from my office some time this week.
(http://i13.photobucket.com/albums/a258/lymph/DSC05750_zps682ddb00.jpg) (http://s13.photobucket.com/user/lymph/media/DSC05750_zps682ddb00.jpg.html)
Shriekbob's lovely ergodox, finally has left my possession. Thanks Bob for being very understanding I hope you enjoy it.
This one looks great, i would really like to see it with some transparent caps on top :eek:
I'm super super chuffed with the Ergodox, it looks great, I'm just waiting for my Penumbra to go on there, and we'll be good to go.
Thank you Margo, you did a great job.
Show ImageThis one looks great, i would really like to see it with some transparent caps on top :eek:
Make all the things transparent :D
Yesterday I modded some windows:
(http://i13.photobucket.com/albums/a258/lymph/IMG_2913_zps5d68ea33.jpg) (http://s13.photobucket.com/user/lymph/media/IMG_2913_zps5d68ea33.jpg.html)
I put up this curtain pole and these curtains, infront of which is going to go my electronics desk :D It's west facing, so gets all the light in the evenings, which is when I do most of my keyboard work.
(http://i13.photobucket.com/albums/a258/lymph/IMG_2914_zps1d169ba8.jpg) (http://s13.photobucket.com/user/lymph/media/IMG_2914_zps1d169ba8.jpg.html)
This window is in my bathroom, it's the least important of all the blinds I need to hang so I did it first to make sure I can do them and make them look nice. The blind is 100% level, the ceiling is not perpendicular to the window sides, which is why the gap above the blind is not an even rectangle!
I also layed a bunch of vinyl flooring that I didn't take a picture of. Now, I need to put up 3 more blinds, get my new bed delivered, and my new sofa's delivered and finally then I can move all my stuff! 2 weeks today I will be waking up there :D
Ignore that the garden looks a bit disordered, that's how it was left when I got the place, and I haven't time to sort it before I move in!
Show ImageThis one looks great, i would really like to see it with some transparent caps on top :eek:
Make all the things transparent :D
Yesterday I modded some windows:
(http://i13.photobucket.com/albums/a258/lymph/IMG_2913_zps5d68ea33.jpg) (http://s13.photobucket.com/user/lymph/media/IMG_2913_zps5d68ea33.jpg.html)
I put up this curtain pole and these curtains, infront of which is going to go my electronics desk :D It's west facing, so gets all the light in the evenings, which is when I do most of my keyboard work.
(http://i13.photobucket.com/albums/a258/lymph/IMG_2914_zps1d169ba8.jpg) (http://s13.photobucket.com/user/lymph/media/IMG_2914_zps1d169ba8.jpg.html)
This window is in my bathroom, it's the least important of all the blinds I need to hang so I did it first to make sure I can do them and make them look nice. The blind is 100% level, the ceiling is not perpendicular to the window sides, which is why the gap above the blind is not an even rectangle!
I also layed a bunch of vinyl flooring that I didn't take a picture of. Now, I need to put up 3 more blinds, get my new bed delivered, and my new sofa's delivered and finally then I can move all my stuff! 2 weeks today I will be waking up there :D
Ignore that the garden looks a bit disordered, that's how it was left when I got the place, and I haven't time to sort it before I move in!
Margo,
so you're not just good with keyboards; you are good at fixing up your place?
btw I have a proposal for you. Small change...
I got a bunch of PM's I need to get back to - probably won't be able to until the weekend I need to get my head down and do some work, got loads of pictures to update the thread with soon though, been doing lots of fun things :) but just want to get them finished to move onto the next load of stuff!
thanks :)
Can't wait to get my keyboard featured in this thread :thumb: :thumb: :thumb:
That...is so damn pretty. Margo, you're going to be the one putting the jd40 kits together, right?
It's really all about the lighting. I just bought two of these studio lights (http://www.ebay.com/itm/190834339138?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT), mini tripods (http://www.ebay.com/itm/350488482805?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT), batteries (http://www.ebay.com/itm/181150698068?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT) and a charger (http://www.ebay.com/itm/371008913548?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT). And simply shot away. With simply good light you can make really good pictures, even with a cellphone.That...is so damn pretty. Margo, you're going to be the one putting the jd40 kits together, right?Yes I am indeed :)
Thanks for the nice pictures JaccoW! One day I will learn to use the semi decent camera I have and stop taking pictures on my iphone (maybe, doubtful hehe)
(http://i13.photobucket.com/albums/a258/lymph/Filco%20switch%20swap/keypresses_zps27639be4.jpg) (http://s13.photobucket.com/user/lymph/media/Filco%20switch%20swap/keypresses_zps27639be4.jpg.html)
(http://i13.photobucket.com/albums/a258/lymph/Filco%20switch%20swap/keypresses_zps27639be4.jpg) (http://s13.photobucket.com/user/lymph/media/Filco%20switch%20swap/keypresses_zps27639be4.jpg.html)
What tool are you using to check keypresses? Is that the one from EK?
Amazing work, thanks!!!! :thumb:
(http://i13.photobucket.com/albums/a258/lymph/Filco%20switch%20swap/keypresses_zps27639be4.jpg) (http://s13.photobucket.com/user/lymph/media/Filco%20switch%20swap/keypresses_zps27639be4.jpg.html)
What tool are you using to check keypresses? Is that the one from EK?
sure is! much prefer it to aqua- has different layouts, and is better for finding chatter box switches as it tells you press duration etc
(http://i13.photobucket.com/albums/a258/lymph/Filco%20switch%20swap/keypresses_zps27639be4.jpg) (http://s13.photobucket.com/user/lymph/media/Filco%20switch%20swap/keypresses_zps27639be4.jpg.html)
What tool are you using to check keypresses? Is that the one from EK?
sure is! much prefer it to aqua- has different layouts, and is better for finding chatter box switches as it tells you press duration etc
So if the switch has chatter, what would that readout look like? I've been using AquaKeyTest and it's been helpful but more information is always a good thing :).
Dustin's GON ISO HHKB, part 1 (still need to do the LED)
(http://i13.photobucket.com/albums/a258/lymph/Dustin%20-%20GON%20ISO%20HHKB/20140809_114422816_iOS_zpsb41a51d9.jpg) (http://s13.photobucket.com/user/lymph/media/Dustin%20-%20GON%20ISO%20HHKB/20140809_114422816_iOS_zpsb41a51d9.jpg.html)
Margo can i get a price on soldering switches in my mx mini? Thanks
Dustin's GON ISO HHKB, part 1 (still need to do the LED)
(http://i13.photobucket.com/albums/a258/lymph/Dustin%20-%20GON%20ISO%20HHKB/20140809_114422816_iOS_zpsb41a51d9.jpg) (http://s13.photobucket.com/user/lymph/media/Dustin%20-%20GON%20ISO%20HHKB/20140809_114422816_iOS_zpsb41a51d9.jpg.html)
Show ImageShow ImageShow ImageShow ImageShow ImageShow ImageShow ImageShow ImageShow ImageDustin's GON ISO HHKB, part 1 (still need to do the LED)
(http://i13.photobucket.com/albums/a258/lymph/Dustin%20-%20GON%20ISO%20HHKB/20140809_114422816_iOS_zpsb41a51d9.jpg) (http://s13.photobucket.com/user/lymph/media/Dustin%20-%20GON%20ISO%20HHKB/20140809_114422816_iOS_zpsb41a51d9.jpg.html)
(http://i13.photobucket.com/albums/a258/lymph/Dustin%20-%20GON%20ISO%20HHKB/20140809_114430278_iOS_zps428acc47.jpg) (http://s13.photobucket.com/user/lymph/media/Dustin%20-%20GON%20ISO%20HHKB/20140809_114430278_iOS_zps428acc47.jpg.html)
(http://i13.photobucket.com/albums/a258/lymph/Dustin%20-%20GON%20ISO%20HHKB/20140809_114803288_iOS_zpsc7683aad.jpg) (http://s13.photobucket.com/user/lymph/media/Dustin%20-%20GON%20ISO%20HHKB/20140809_114803288_iOS_zpsc7683aad.jpg.html)
(http://i13.photobucket.com/albums/a258/lymph/Dustin%20-%20GON%20ISO%20HHKB/20140809_115115825_iOS_zps623f062b.jpg) (http://s13.photobucket.com/user/lymph/media/Dustin%20-%20GON%20ISO%20HHKB/20140809_115115825_iOS_zps623f062b.jpg.html)
(http://i13.photobucket.com/albums/a258/lymph/Dustin%20-%20GON%20ISO%20HHKB/20140809_121214536_iOS_zps23552d57.jpg) (http://s13.photobucket.com/user/lymph/media/Dustin%20-%20GON%20ISO%20HHKB/20140809_121214536_iOS_zps23552d57.jpg.html)
(http://i13.photobucket.com/albums/a258/lymph/Dustin%20-%20GON%20ISO%20HHKB/20140809_124315920_iOS_zps1339cf05.jpg) (http://s13.photobucket.com/user/lymph/media/Dustin%20-%20GON%20ISO%20HHKB/20140809_124315920_iOS_zps1339cf05.jpg.html)
(http://i13.photobucket.com/albums/a258/lymph/Dustin%20-%20GON%20ISO%20HHKB/20140809_134523285_iOS_zps25ce58d6.jpg) (http://s13.photobucket.com/user/lymph/media/Dustin%20-%20GON%20ISO%20HHKB/20140809_134523285_iOS_zps25ce58d6.jpg.html)
(http://i13.photobucket.com/albums/a258/lymph/Dustin%20-%20GON%20ISO%20HHKB/20140809_144642475_iOS_zpsac852154.jpg) (http://s13.photobucket.com/user/lymph/media/Dustin%20-%20GON%20ISO%20HHKB/20140809_144642475_iOS_zpsac852154.jpg.html)
(http://i13.photobucket.com/albums/a258/lymph/Dustin%20-%20GON%20ISO%20HHKB/20140809_151516030_iOS_zps67f8b87f.jpg) (http://s13.photobucket.com/user/lymph/media/Dustin%20-%20GON%20ISO%20HHKB/20140809_151516030_iOS_zps67f8b87f.jpg.html)
(http://i13.photobucket.com/albums/a258/lymph/Dustin%20-%20GON%20ISO%20HHKB/20140809_151752414_iOS_zps67d2cc4d.jpg) (http://s13.photobucket.com/user/lymph/media/Dustin%20-%20GON%20ISO%20HHKB/20140809_151752414_iOS_zps67d2cc4d.jpg.html)
More up later! then tomorrow going to get the 360c done and out the door.
Alright thanks that is so cheapppp :thumb: I will message you when i receive my pcb :)Margo can i get a price on soldering switches in my mx mini? Thanks
Not much - I'll do it for you for a tenner + postage if it's literally just putting switches in the board.
Dustin's GON ISO finished :)
(http://i13.photobucket.com/albums/a258/lymph/Dustin%20-%20GON%20ISO%20HHKB/20140813_181940217_iOS_zpseb42823e.jpg) (http://s13.photobucket.com/user/lymph/media/Dustin%20-%20GON%20ISO%20HHKB/20140813_181940217_iOS_zpseb42823e.jpg.html)
Dustin's GON ISO finished :)
(http://i13.photobucket.com/albums/a258/lymph/Dustin%20-%20GON%20ISO%20HHKB/20140813_181940217_iOS_zpseb42823e.jpg) (http://s13.photobucket.com/user/lymph/media/Dustin%20-%20GON%20ISO%20HHKB/20140813_181940217_iOS_zpseb42823e.jpg.html)
So i got my first board with clears yesterday!
I wouldn't be posting in this thread if it wasn't Margo's job, so that's the reasoning behind it.
The board itself is a stock FILCO, I asked Margo to do a switch swap since he was very well known for really doing his job good.
The board itself feels really good - maybe i expected too much from clears, but they're very fine the way they are. There are absolutely no scratches and the board doesn't show that it has been pulled apart by any means. The protection sticker for the main screw of the board has been penetrated, but that doesn't really count :p
Every button of course registers.
Although a switch swap wasn't really a challenge for a man of Margo's caliber, he still did a splendid job with it!
To top everything off, the attitude of this guy is just phenomenal. I haven't been on this forum for long, yet everyone I met was extremely friendly and helpful. But Margo is just something special. He really did EVERYTHING to do this experience as enjoyable for me as possible! To top everything off, I even got an easter egg which I didn't expect! An orange button that says "Margo's"
10/10, Thanks Margo!
To anyone reading this, whatever work needs to be done with your keyboard, ask Margo.
You will definitely not regret it!
Love dustins board, are there purple leds on the bottom too?
And that 360c is looking amazing, are those mx whites?!?!
My first Margo's Mods boards :DShow Image(http://i.imgur.com/VHPmcGm.jpg)
I need to finish the LEDs and take a picture of that - there some LED in at the moment but they are not all in yet.
My first Margo's Mods boards :DNice photo! ;DShow Image(http://i.imgur.com/VHPmcGm.jpg)
I need to finish the LEDs and take a picture of that - there some LED in at the moment but they are not all in yet.
My first Margo's Mods boards :DNice photo! ;DShow Image(http://i.imgur.com/VHPmcGm.jpg)
I need to finish the LEDs and take a picture of that - there some LED in at the moment but they are not all in yet.
What is the controler of the 360c?atmega16a pu
What is the controler of the 360c?
What is the controler of the 360c?
do you offer your services to europeans too?He's in the UK :))
do you offer your services to europeans too?He's in the UK :))
Hi!
I am highly interested in ordering custom mechanical keyboard. I'd like to have a TKL or, if won't be able to afford TKL, even smaller keyboard. I want the least expensive option (I don't mind if it is GH60, phantom or a keyboard with replaced switches). I am from Poland, so let me know if there are any problems with shipping. I've made project of keyboard where colour of switch describes type of Cherry MX switch (pinkish stands for MX Clear, grey for MX Tacticle Grey). Tell me about pricing and costs.
Looking forward to your reply :)
Project: http://imgur.com/XGFFfvi
So if i understand right you could build a Ergodox if i buy one from Massdrop? (if it comes again) :thumb:
(didn't do it when it was on Massdrop because i don't know how to build one :'( )
Things I have modded/repaired/built that I can think of:
Ergodox full build (incl SMD)
Ergodox full build (incl SMD)
Ergodox full build (incl SMD)
Ergodox full build (incl SMD)
Ergodox full build (incl SMD)
Ergodox full build (incl SMD)
Ergodox partial repair and finished build
cool! :DSo if i understand right you could build a Ergodox if i buy one from Massdrop? (if it comes again) :thumb:
(didn't do it when it was on Massdrop because i don't know how to build one :'( )QuoteThings I have modded/repaired/built that I can think of:
Ergodox full build (incl SMD)
Ergodox full build (incl SMD)
Ergodox full build (incl SMD)
Ergodox full build (incl SMD)
Ergodox full build (incl SMD)
Ergodox full build (incl SMD)
Ergodox partial repair and finished build
I would say so, as long as you provide all the parts (switches included) :p
cool! :DSo if i understand right you could build a Ergodox if i buy one from Massdrop? (if it comes again) :thumb:
(didn't do it when it was on Massdrop because i don't know how to build one :'( )QuoteThings I have modded/repaired/built that I can think of:
Ergodox full build (incl SMD)
Ergodox full build (incl SMD)
Ergodox full build (incl SMD)
Ergodox full build (incl SMD)
Ergodox full build (incl SMD)
Ergodox full build (incl SMD)
Ergodox partial repair and finished build
I would say so, as long as you provide all the parts (switches included) :p
SMD?
aah okay. thanks!cool! :DSo if i understand right you could build a Ergodox if i buy one from Massdrop? (if it comes again) :thumb:
(didn't do it when it was on Massdrop because i don't know how to build one :'( )QuoteThings I have modded/repaired/built that I can think of:
Ergodox full build (incl SMD)
Ergodox full build (incl SMD)
Ergodox full build (incl SMD)
Ergodox full build (incl SMD)
Ergodox full build (incl SMD)
Ergodox full build (incl SMD)
Ergodox partial repair and finished build
I would say so, as long as you provide all the parts (switches included) :p
SMD?
surface-mount device. I think the diodes are SMD
All questions look as though they have been answered :Dhehe i understand mate ;) well then I won't let you build one!
there can be issues using a massdrop case with hole through diodes unless you trim the legs real short - otherwise they foul the case .
I like SMD as it means I get to use my hot air station :D
I would build your Dox Tyver, but, over all I think I want to stop building doxes, I hate them. I don't enjoy building them one bit! I don't know why that is.
Hello there Margo, I think I asked this a while ago but you where taking a break, and I forgot where I asked it... Anyway...
Do you do stepped caps lock mods?
I have all the keys needed for the mod, and extra donor keys, I just lack the tools, time and most importantly; ability.
Cheers!
No problem! Just thought I would ask :P
Potato Teaser - It's not finished (As it needs to have the switches soldered, cable soldered on and firmware flashed onto it)Beautiful!Show Image(http://i.imgur.com/6Na5nho.jpg?1)
Potato Teaser - It's not finished (As it needs to have the switches soldered, cable soldered on and firmware flashed onto it)Show Image(http://i.imgur.com/6Na5nho.jpg?1)
Potato Teaser - It's not finished (As it needs to have the switches soldered, cable soldered on and firmware flashed onto it)That's a sweet looking board Margo. What is it?Show Image(http://i.imgur.com/6Na5nho.jpg?1)
Potato Teaser - It's not finished (As it needs to have the switches soldered, cable soldered on and firmware flashed onto it)That's a sweet looking board Margo. What is it?Show Image(http://i.imgur.com/6Na5nho.jpg?1)
Already got a verification mail that this keyboard is on its way to Sweden! ;)Potato Teaser - It's not finished (As it needs to have the switches soldered, cable soldered on and firmware flashed onto it)Show Image(http://i.imgur.com/6Na5nho.jpg?1)
You should accidentally mail that to me.
Already got a verification mail that this keyboard is on its way to Sweden! ;)Potato Teaser - It's not finished (As it needs to have the switches soldered, cable soldered on and firmware flashed onto it)Show Image(http://i.imgur.com/6Na5nho.jpg?1)
You should accidentally mail that to me.
Don't break my dreams :(Already got a verification mail that this keyboard is on its way to Sweden! ;)Potato Teaser - It's not finished (As it needs to have the switches soldered, cable soldered on and firmware flashed onto it)Show Image(http://i.imgur.com/6Na5nho.jpg?1)
You should accidentally mail that to me.
i think you will find that is actually mine good sir
Bunny's right - it's his! You don't want to cross the bunny man.I think i should back off... I heard that the bunny man is no one you messing with :(
bunnylakehype"I got boards."Show Image(http://i.imgur.com/un8ygpK.jpg)
is this the GON 70 ?
New delivery today from Mr Margo himself - GON NerD TKL with lubed & stickered vintage blacks and orange LEDs both for the switches and sides LEDNever really loved the colour orange, but DAMN, thats a nice looking board. :thumb: Margo does such awesome work.Show Image(http://i.imgur.com/wqIzFaY.jpg)Show Image(http://i.imgur.com/DPEGObF.jpg)Show Image(http://i.imgur.com/s3nXeby.jpg)Show Image(http://i.imgur.com/4SSm6c6l.jpg)
Looks particularly nice with some nice dyesubs on :D Not original Cherry I hasten to add :p
A truly awesome job by Margo - really top notch work :thumb:
New delivery today from Mr Margo himself - GON NerD TKL with lubed & stickered vintage blacks and orange LEDs both for the switches and sides LEDShow Image(http://i.imgur.com/wqIzFaY.jpg)Show Image(http://i.imgur.com/DPEGObF.jpg)Show Image(http://i.imgur.com/s3nXeby.jpg)Show Image(http://i.imgur.com/4SSm6c6l.jpg)
Looks particularly nice with some nice dyesubs on :D Not original Cherry I hasten to add :p
A truly awesome job by Margo - really top notch work :thumb:
(http://i.imgur.com/wvFmIRi.jpg) (http://i.imgur.com/wvFmIRi.jpg)
(http://i.imgur.com/wvFmIRi.jpg) (http://i.imgur.com/wvFmIRi.jpg)
Show Image(http://i.imgur.com/wvFmIRi.jpg) (http://i.imgur.com/wvFmIRi.jpg)
(http://i.imgur.com/zCsXoY9.jpg) (http://i.imgur.com/zCsXoY9.jpg)
:) <3
album here http://imgur.com/a/A52q5
Show Image(http://i.imgur.com/wvFmIRi.jpg) (http://i.imgur.com/wvFmIRi.jpg)
(http://i.imgur.com/zCsXoY9.jpg) (http://i.imgur.com/zCsXoY9.jpg)
:) <3
album here http://imgur.com/a/A52q5
The pink color come from switch stickers right?
Looks fantastic.
(http://i.imgur.com/wvFmIRi.jpg) (http://i.imgur.com/wvFmIRi.jpg)
Ah I see! Sorry, yes, clear tops, pink stickers. Linear grey's with 62g gold springs. Lubed with thin lube and korean spring oil.
Ah I see! Sorry, yes, clear tops, pink stickers. Linear grey's with 62g gold springs. Lubed with thin lube and korean spring oil.
That sounds amazing to type on..
Whose idea was it to use clear tops with colored stickers? Awesome idea that turned out really well... Now I feel like an idiot for buying black stickers.
:o You're back margo :D. Can you build my Octagon I just got, having trouble finding anyone else to build it. I'm not in a hurry if you are a bit busy at the moment.
Yea that's fine. If you're still in Brighton I may be able to get a friend to drop it off if that's ok. I need lube, white switch LEDs, switch stickers (don't mind colour) and clear switch tops, do you have any of those on hand?Whose idea was it to use clear tops with colored stickers? Awesome idea that turned out really well... Now I feel like an idiot for buying black stickers.
All b7ad! I just turned his dreams into reality :) you wait until you see his next board :-X :-X :-X :-X
watch this space. hype.:o You're back margo :D. Can you build my Octagon I just got, having trouble finding anyone else to build it. I'm not in a hurry if you are a bit busy at the moment.
It will literally be a 6 week-ish wait until I get time to build it - but if you don't mind waiting, then I can :)
Whose idea was it to use clear tops with colored stickers? Awesome idea that turned out really well... Now I feel like an idiot for buying black stickers.
All b7ad! I just turned his dreams into reality :) you wait until you see his next board :-X :-X :-X :-X
watch this space. hype.
I think these are potentially the best switches I've modded/lubed, I'm not saying any I've done in the past are bad, but these just seem sublime, though I've not capped the board as it's not mine, and I've already re-wrapped it in soft stuff, so you'll have to ask b7ad in a little while :)
Man where do you source those stickers?
Man where do you source those stickers?
these were for one of my boards, but I had a problem with the stickers brad sent, which were admittedly better - so I offered him these instead as I'm never going to get round to stickering a board for myself :D I'm not sure where these came from, well I got them from bunny, but this was last year some time, maybe even longer ago.
Behold!Euch. Partial poly plate? B7ad, you don't want that. Let me trade you my 360c with a nice solid, aluminium plate.
(http://i.imgur.com/uWiSB6N.jpg) (http://i.imgur.com/uWiSB6N.jpg)
Behold!
(http://i.imgur.com/uWiSB6N.jpg) (http://i.imgur.com/uWiSB6N.jpg)
It would be nice if it was finally his own board... but probably not. :PBehold!Hoooooly ****, who's is that?
(http://i.imgur.com/uWiSB6N.jpg) (http://i.imgur.com/uWiSB6N.jpg)
Behold!
(http://i.imgur.com/uWiSB6N.jpg) (http://i.imgur.com/uWiSB6N.jpg)
Hoooooly ****, who's is that?
It would be nice if it was finally his own board... but probably not. :PBehold!Hoooooly ****, who's is that?
(http://i.imgur.com/uWiSB6N.jpg) (http://i.imgur.com/uWiSB6N.jpg)
edit: sorry I accidentally edited this and didn't quote - I'll repost what I wrote - margo
Here's some pictures of my boards Margo built :-*
Apologies I'm not the best with taking photo's, there's a couple more on my blog, but I think these are the best of the bunch;Show Image(http://i.imgur.com/ulcXTti.jpg)Show Image(http://i.imgur.com/ltbqcHc.jpg)Show Image(http://i.imgur.com/qwGlP8b.jpg)Show Image(http://i.imgur.com/fDc0Hwm.jpg)Show Image(http://i.imgur.com/ZZ97Zgj.jpg)Show Image(http://i.imgur.com/PwRMT9O.jpg)Show Image(http://i.imgur.com/CPLNf2P.jpg)Show Image(http://i.imgur.com/TponZtF.jpg)Show Image(http://i.imgur.com/gU1rVdp.jpg)Show Image(http://i.imgur.com/busVSNo.jpg)Show Image(http://i.imgur.com/r9JvPEh.jpg)
(http://i.imgur.com/pOu9ey4.png)Hey I got loads of nice boards :D Just none that are fully margo tuned, well, half a gon but it bust I need to swap pcb, then I will have a full margo's mods board again :D It's B7ad's, part of his awesome duo of boards I just built.It would be nice if it was finally his own board... but probably not. :PBehold!Hoooooly ****, who's is that?
(http://i.imgur.com/uWiSB6N.jpg) (http://i.imgur.com/uWiSB6N.jpg)
Seen this thread for the first time, that's some great work margo, not to mention excellent roller blind installation.
You alive Margo?
You alive Margo?
hes been at a work training thing for a few days, should be back around tomorrow
Margo can you reply to my PM's please?
Nice one mate, nice to see how you work. You're a little bit more organized than me :D.
Watch me build keyboards here https://onedrive.live.com/?cid=D2061ACA9EDE7042&id=D2061ACA9EDE7042%2110753&v=3&authkey=%21AB_CFwR7YMCLrTYVery interesting. Bunny need to link this to people waiting on their JD40 orders, they'll understand the amount of work it takes.
lower quality here, might stream better I dunno https://onedrive.live.com/?cid=d2061aca9ede7042&id=D2061ACA9EDE7042!10752&action=Share&v=3
Watch me build keyboards here https://onedrive.live.com/?cid=D2061ACA9EDE7042&id=D2061ACA9EDE7042%2110753&v=3&authkey=%21AB_CFwR7YMCLrTYVery interesting. Bunny need to link this to people waiting on their JD40 orders, they'll understand the amount of work it takes.
lower quality here, might stream better I dunno https://onedrive.live.com/?cid=d2061aca9ede7042&id=D2061ACA9EDE7042!10752&action=Share&v=3
Too bad the pcbs don't have the hole for chery pegs, that's so much time wasted clipping those stabs.
Don't, I fixed the board with the help of GeekHackers.Watch me build keyboards here https://onedrive.live.com/?cid=D2061ACA9EDE7042&id=D2061ACA9EDE7042%2110753&v=3&authkey=%21AB_CFwR7YMCLrTYVery interesting. Bunny need to link this to people waiting on their JD40 orders, they'll understand the amount of work it takes.
lower quality here, might stream better I dunno https://onedrive.live.com/?cid=d2061aca9ede7042&id=D2061ACA9EDE7042!10752&action=Share&v=3
Too bad the pcbs don't have the hole for chery pegs, that's so much time wasted clipping those stabs.
I've just seen your pm! I will get back to you later today :)
Don't, I fixed the board with the help of GeekHackers.Watch me build keyboards here https://onedrive.live.com/?cid=D2061ACA9EDE7042&id=D2061ACA9EDE7042%2110753&v=3&authkey=%21AB_CFwR7YMCLrTYVery interesting. Bunny need to link this to people waiting on their JD40 orders, they'll understand the amount of work it takes.
lower quality here, might stream better I dunno https://onedrive.live.com/?cid=d2061aca9ede7042&id=D2061ACA9EDE7042!10752&action=Share&v=3
Too bad the pcbs don't have the hole for chery pegs, that's so much time wasted clipping those stabs.
I've just seen your pm! I will get back to you later today :)