geekhack Community > Other Geeky Stuff
EEs wanted: will this USB drive work with *this* USB hub?
(1/1)
Stupidface:
(NB: If any of the below is unclear, please let me know and I will clarify.)
I recently acquired an 8TB USB 3.0 drive. In terms of power requirements, the drive is rated (as near as I can make out) at 12V 4A.
The drive has two FW800 ports on the back; I will be using one of those ports to transfer data. The drive also comes with a power cable containing a barrel-type connector on one end to plug into the drive and a USB-A plug on the other end to plug into a USB port of some kind for power...which is where the USB hub comes in.
The particular USB hub I am looking at to do this is described as "a universal AC 100 – 240 V to DC 5V 6A with 6 USB Ports Power Supply." The 6 USB ports are connected in parallel so the amps will be divided according the number of charging devices I plug in. I plan on plugging in two devices (a smartphone and the aforementioned USB drive), so presumably each USB port will be able to provide 3 amps.
ETA - For the sake of anyone faced with a similar problem in the future, this matter hangs on the following formula:
W = V * A (or: watts equals volts multiplied by amps)
In this case, we have a hard drive with a power supply drawing 12 volts at 4 amps, so: 12V * 4A = 48 Watts
Meanwhile, as suicidal_orange points out, the USB hub supplies 5 volts at 6 amps so: 5V * 6A = 30 Watts.
Bottom line: Plugging a 48 Watt device into a 30 Watt hub and expecting it to operate is not likely to meet with much success.
(Well, now I know.)
suicidal_orange:
USB 3 has a spec for power delivery which allows for up to 240W, your drive (if you guessed right) requires 12V@4A which is only 48W so that's how the supplied cable should be used.
That hub provides 5V@6A which is only 30W and that's before the phone steals any and some is lost in the voltage conversion so if everything you said is accurate it wont work.
Darthbaggins:
Straight nope, it wont be a stable power source. (As S.Orange already stated as well)
Stupidface:
--- Quote from: suicidal_orange on Mon, 03 January 2022, 09:38:03 ---USB 3 has a spec for power delivery which allows for up to 240W, your drive (if you guessed right) requires 12V@4A which is only 48W so that's how the supplied cable should be used.
--- End quote ---
Yes, and therein lies the problem: the laptop I would like to use this drive with only has USB 2.0 ports, hence my messing around with USB 3.0 hubs. Unfortunately, as I have quickly learned, many of the USB 3.0 hubs for sale are not meant to power anything substantial (like, say, a HD drawing 48 Watts).
--- Quote from: suicidal_orange on Mon, 03 January 2022, 09:38:03 ---That hub provides 5V@6A which is only 30W and that's before the phone steals any and some is lost in the voltage conversion so if everything you said is accurate it wont work.
--- End quote ---
Indeed, I was barking up the wrong tree with this one. Thank you for taking the time to sort me out. [tips hat]
Stupidface:
--- Quote from: Darthbaggins on Mon, 03 January 2022, 14:48:30 ---Straight nope, it wont be a stable power source. (As S.Orange already stated as well)
--- End quote ---
Thank you for confirming suicidal_orange's answer. This one was a no-hoper, all right.
Navigation
[0] Message Index
Go to full version