an angle of 6.969 deg.
Oh wow I'm concerned about how much competition there's gonna be this one
just ****ing kidding there's a literal 0% chance I'm losing the raffle
snip
Can we also get "Jane" engraved on the inception brass weight on the bottom too?
I couldn't think of a suggestion/comment when filling the IC form earlier today, but now I remember: I already mentioned this on Discord, would DHL Express be an option for shipping? AFAIK you use Aramex as well, which is a huge pain in the ass here in Germany. Either you pay Sovereign Couriers (the cartel that takes over local delivery) 45EUR in fees plus the 19% VAT to import it for you, or you request to do customs yourself which means filling out forms and sending them via letter across Germany to the main customs office in Frankfurt, who then reply and only then Sovereign Couriers will release the package.
i love yutski and yutski accessories
I couldn't think of a suggestion/comment when filling the IC form earlier today, but now I remember: I already mentioned this on Discord, would DHL Express be an option for shipping? AFAIK you use Aramex as well, which is a huge pain in the ass here in Germany. Either you pay Sovereign Couriers (the cartel that takes over local delivery) 45EUR in fees plus the 19% VAT to import it for you, or you request to do customs yourself which means filling out forms and sending them via letter across Germany to the main customs office in Frankfurt, who then reply and only then Sovereign Couriers will release the package.
YES!! THIS 100%!! Sovereign Couriers with their extra charges are really annoying!!
Will it be limited to 40-50 units? There's already like twice as many people interested in hereLmao yeah, thats really unfortunate. Idk if its going to be FCFS or raffle
Will it be limited to 40-50 units? There's already like twice as many people interested in hereLmao yeah, thats really unfortunate. Idk if its going to be FCFS or raffle
Sent from my SM-J700T using Tapatalk
Will it be limited to 40-50 units? There's already like twice as many people interested in here
Will it be limited to 40-50 units? There's already like twice as many people interested in hereLmao yeah, thats really unfortunate. Idk if its going to be FCFS or raffle
Sent from my SM-J700T using Tapatalk
How would FCFS work? Just wait until he posts up an order form?
I thought it would be more fair if we did raffle.
Will it be limited to 40-50 units? There's already like twice as many people interested in hereLmao yeah, thats really unfortunate. Idk if its going to be FCFS or raffle
Sent from my SM-J700T using Tapatalk
How would FCFS work? Just wait until he posts up an order form?
I thought it would be more fair if we did raffle.
So everyone is good with the bottom weight design? I must not be seeing it right.No, you're definitely not the only one. I was gonna wait a bit longer after the initial hype comments about there being a new Jane to post my reply, but this seemed like a decent opportunity. I too think there is too much going on at the bottom, but my issue is with exposed screws. There's screws to hold the case together and to mount the bottom weight. I'd love it if they could design a weight where you can't see the screws mounting the bottom weight. I also think the raw brass should go with either a brushed steel or the matte coated steel and not the polished steel that can get scratched, and then maybe a moat shiny coated brass to go with the polished steel.
So everyone is good with the bottom weight design? I must not be seeing it right.No, you're definitely not the only one. I was gonna wait a bit longer after the initial hype comments about there being a new Jane to post my reply, but this seemed like a decent opportunity. I too think there is too much going on at the bottom, but my issue is with exposed screws. There's screws to hold the case together and to mount the bottom weight. I'd love it if they could design a weight where you can't see the screws mounting the bottom weight. I also think the raw brass should go with either a brushed steel or the matte coated steel and not the polished steel that can get scratched, and then maybe a moat shiny coated brass to go with the polished steel.
I also think the brass portion is just too small. The proportion of the brass with the steel around it just looks weird to me.
Of course these are just my opinions, I'm definitely interested and will be following to see how development goes.
Also, I'd be willing to pay extra to have the Toblerone weight and the bottom weight as all brass. No steel.
Will it be limited to 40-50 units? There's already like twice as many people interested in here
The bigger the group buy, the worse things can get. Limiting to 50 units makes thing safer for the group buy runner, specially if things go south.
We tend to forget that running a group buy isn't easy.
Yeah, I typically fall into the camp of "I don't care all that much because it's at the bottom and I don't see it", as you do. To be fair, my criticism of too many screws is kinda nitty gritty, but at 500 dollars per kit before paying for shipping, paypal fees, and although not absolutely necessary the extra accessories I will likely order (pcbs, plates), this will be one expensive board. Surprisingly I'd be okay with everything if the kit was 400 dollars, but at 500 dollars, my brown ass has to draw the line somewhere between me being okay because it's at the bottom and having higher personal expectations. Still stoked for this release though.So everyone is good with the bottom weight design? I must not be seeing it right.No, you're definitely not the only one. I was gonna wait a bit longer after the initial hype comments about there being a new Jane to post my reply, but this seemed like a decent opportunity. I too think there is too much going on at the bottom, but my issue is with exposed screws. There's screws to hold the case together and to mount the bottom weight. I'd love it if they could design a weight where you can't see the screws mounting the bottom weight. I also think the raw brass should go with either a brushed steel or the matte coated steel and not the polished steel that can get scratched, and then maybe a moat shiny coated brass to go with the polished steel.
I also think the brass portion is just too small. The proportion of the brass with the steel around it just looks weird to me.
Of course these are just my opinions, I'm definitely interested and will be following to see how development goes.
Also, I'd be willing to pay extra to have the Toblerone weight and the bottom weight as all brass. No steel.
Yeah I'm personally not a huge fan of there being a weight within a weight on the bottom but since I'm not normally going to see that part of the board, it is something that doesn't bother me nearly as much.
@GB runner. You mentioned the plate is a new design, I'm curious with the changes being made. Is there a side by side photo between the new plate and old plate? Thanks :)
Will it be limited to 40-50 units? There's already like twice as many people interested in here
I am hoping to get at least 50 boards from the group buy
Yes please.Will it be limited to 40-50 units? There's already like twice as many people interested in hereQuoteI am hoping to get at least 50 boards from the group buy
Sounds like we're hoping to get at least 50, as in it won't be limited hopefully.
The weight inside a weight is so good. Do you guys prefer coated or naked brass weight?
shouldn't be eyeing this when I'm broke
[/quote
Don't worry, debt is a friend
Any chance for alps support? :))Yeah
Any chance for alps support? :))Yeah
https://www.instagram.com/p/Bl2lMf1DhVM/?hl=en&taken-by=yuktsi
Any chance for alps support? :))Yeah
https://www.instagram.com/p/Bl2lMf1DhVM/?hl=en&taken-by=yuktsi
you literally scared the crap outta me. I frantically rushed over to this thread hoping for the GB form LMAO :))
I'm keeping a hawk eye on this thread and I see normal comments. Highly disappoint.Any chance for alps support? :))Yeah
https://www.instagram.com/p/Bl2lMf1DhVM/?hl=en&taken-by=yuktsi
you literally scared the crap outta me. I frantically rushed over to this thread hoping for the GB form LMAO :))
i can feel that hahaha
Offered during the buy or plate files/other pcbs? This is some cool news tho. :DAny chance for alps support? :))Yeah
https://www.instagram.com/p/Bl2lMf1DhVM/?hl=en&taken-by=yuktsi
Can we have a vote to removenoinferiorityiso from this board
Can we have a vote to removeinferiorityiso from this board
Hi guys, thank you for all the Google form responses and suggestions. Here are details about the Jane v2.Looks great, can't wait!
The basic kit will come brass plate, polycarbonate half plate can also be purchased as an additional plate. Alps PCB/plate will be offered during the buy.Show Image(https://i.imgur.com/0CjPv2q.png)
As many have suggested, I have added some engravings to the bottom weights. Let me know what you think.Show Image(https://i.imgur.com/gu8TA7b.png)
I've yet to decide on the colors, but blue-grey will be offered for sure. The GB is tentatively fixed on 2nd of October, 1200 (GMT-4), depending on the approval of the GB.
Thanks.
GMT-4 12:00pm Got it!
GMT-4 12:00pm Got it!
they are the sameGMT-4 12:00pm Got it!
also time for a lesson: what's the difference between GMT and UTC,I'm confused now Xp
GMT-4 12:00pm Got it!
also time for a lesson: what's the difference between GMT and UTC,I'm confused now Xp
How about mirror polished weight option?The triangular stainless steel weight will be mirror polished but the bottom one will be sandblasted. I will take some photos when there's better lighting.
Gmt-4 == EST?
How about mirror polished weight option?The triangular stainless steel weight will be mirror polished but the bottom one will be sandblasted. I will take some photos when there's better lighting.
Gmt-4 == EST?yes
Personally I don’t really like the look of the “Jane v2” engraving.
However the other engravings looks great!
Sent from my iPhone using Tapatalk
Personally I don’t really like the look of the “Jane v2” engraving.
However the other engravings looks great!
Sent from my iPhone using Tapatalk
Agree. The TGR logo alone is the better choice. It's enough that the brass weight has the Jane engraving on it. Maybe modify that one and include a 2 in that same typeface.
I've yet to decide on the colors, but blue-grey will be offered for sure. The GB is tentatively fixed on 2nd of October, 1200 (GMT-4), depending on the approval of the GB.
I've yet to decide on the colors, but blue-grey will be offered for sure. The GB is tentatively fixed on 2nd of October, 1200 (GMT-4), depending on the approval of the GB.
What sort of blue-grey did you have in mind? I know you offered it on the Jane R1. Will it be closer to that tone (more blue than grey) or will it be something reminiscent of the 356.2 (more grey than blue)?