Author Topic: Greetech Brown switch review  (Read 7315 times)

0 Members and 1 Guest are viewing this topic.

Offline Reimu_64

  • Thread Starter
  • Posts: 57
    • KeebWorks
Greetech Brown switch review
« on: Thu, 02 July 2020, 16:22:40 »
Here's a switch I find to be superior to Cherry MX Browns that no one seems to know about.

Offline HungerMechanic

  • Posts: 821
Re: Greetech Brown switch review
« Reply #1 on: Thu, 02 July 2020, 21:46:21 »
It's my understanding that these make good housings for some frankenswitches, including OUTEMU Silent Skies. I think the housing was about as quiet with those stems as the actual OUTEMU housing.

I think I've heard of them involved in Ergo Clear projects more generally, and some other switch mods.

Offline RedJohn456

  • Posts: 10
Re: Greetech Brown switch review
« Reply #2 on: Thu, 27 August 2020, 19:16:27 »
I found out about greetech brown after seeing ActualGlacier's typing tests with his Lin Whale. They sounded heavenly and so I had to try them. Paid out the wazoo to get them fast from mk.com to Canada but they were quite disappointing out of the box.

I have never seen stem wobble this bad before, but after filming and lubing, I have really come to love them. I lubed them with a nice coating of 3204 but they are still scratchy. However the main that thing bothers me about them is the sound of the stem contacting the leaf, the leafs are NOISY AF and for obvious reasons I can't lube them.

I soldered them into a Durgod K320 I had lying around, and I am using them with stock springs. I think I will be spring swapping and am considering using Sprit 63.5, Outemu 62g or Durock 62g.

Again I have yet to try the SMD variant but apparently the SMD variant is different in tactility from the opaque housing variant. I will be ordering a small batch of the RGB variants to see how they fare.

I know I spent more of the post complaining about the switches but I still love them so much and I look forward to typing on them whenever I can. I just need to tune them further to get the most out of them - lots of potential here. Love how the tactile bump is larger than both the MX and Gateron Brown. If only I could get these to be as smooth as gaterons, this would be endgame light tactile for me.

Offline Rob27shred

  • Posts: 1194
  • Location: Pittsburgh, PA
  • Insane in the Membrane! 👻
Re: Greetech Brown switch review
« Reply #3 on: Thu, 27 August 2020, 19:44:05 »
Greetech switches do fly under the radar, although they have been known about for sometime. Specifically Skully (the Clueboard creator) used to (may still not 100% sure) sell them & tried to turn the community onto them as a cheaper alternative to Cherry MX without much loss in quality. This was quite a few yrs. back though, when Zealios were the only boutique switch out & Cherry really was considered king. They never caught on, then subsequently got buried in the onslaught of boutique switches & clones with better quality than Cherry MX.

Offline molohov

  • Posts: 1
Re: Greetech Brown switch review
« Reply #4 on: Wed, 09 June 2021, 14:03:25 »
Again I have yet to try the SMD variant but apparently the SMD variant is different in tactility from the opaque housing variant. I will be ordering a small batch of the RGB variants to see how they fare.

Did you ever try the SMD variant and notice any differences between it and the opaque black version? I currently have the latter and am interested if the SMD variant has sharper tactility, as the OP reviewed the SMD variant.

I noticed that HaaTa actually has two different Greetech Brown graphs in his plot.ly library, and they have two completely different force curves!
Opaque black top/bottom (smaller, sharp bump with 2.0mm actuation)
https://chart-studio.plotly.com/~haata/111/greetech-brown/

Clear top/black bottom (larger, sharp bump with 2.65mm actuation)
https://chart-studio.plotly.com/~haata/113/greetech-brown/

Strangely, the SMD version that OP reviewed doesn't seem to fall into either of these descriptions. Therefore, I'm curious if the SMD version is the same as the original opaque black version, or is more like the latter version.
« Last Edit: Thu, 10 June 2021, 17:25:02 by molohov »