Author Topic: [GB] Duck 60% Raven/Sidewinder (Read 36973 times)

whizzard · « **Reply #50 on:** Tue, 31 May 2022, 12:47:32 »

Quote from: liberator on Tue, 31 May 2022, 08:41:55

Requested an order edit on May 23rd when the invoices went out. I didn't receive a response and my order is canceled it looks like.

I'd like to join the GB if possible.

He probably is just fulfilling the invoices that he just sent out. He gave a few weeks of time for edits/clarification before he sent them out. You can get in on the next round of sales for sure though if your order was canceled or whatever so don't worry too much over it. Best of luck.

liberator · « **Reply #51 on:** Tue, 31 May 2022, 15:05:01 »

Quote from: whizzard on Tue, 31 May 2022, 12:47:32

Quote from: liberator on Tue, 31 May 2022, 08:41:55
Requested an order edit on May 23rd when the invoices went out. I didn't receive a response and my order is canceled it looks like.

I'd like to join the GB if possible.

He probably is just fulfilling the invoices that he just sent out. He gave a few weeks of time for edits/clarification before he sent them out. You can get in on the next round of sales for sure though if your order was canceled or whatever so don't worry too much over it. Best of luck.

I was in the group that got an invoice just sent out and I requested the edit the day they went out, once I had an invoice number to specify the edits.

Sounds like this is the final round for this particular board so I'd like to get in it if possible.

TrueCustom · « **Reply #52 on:** Wed, 01 June 2022, 13:12:03 »

Quote from: liberator on Tue, 31 May 2022, 08:41:55

Requested an order edit on May 23rd when the invoices went out. I didn't receive a response and my order is canceled it looks like.

I'd like to join the GB if possible.

Could you re-send the email to me?

liberator · « **Reply #53 on:** Thu, 02 June 2022, 15:23:54 »

Quote from: TrueCustom on Wed, 01 June 2022, 13:12:03

Quote from: liberator on Tue, 31 May 2022, 08:41:55
Requested an order edit on May 23rd when the invoices went out. I didn't receive a response and my order is canceled it looks like.

I'd like to join the GB if possible.

Could you re-send the email to me?

I see you found it, I've replied. Thank you!

Puddsy · « **Reply #54 on:** Thu, 02 June 2022, 17:37:01 »

Hi truecustom, sent you an email a bit ago.

TrueCustom · « **Reply #55 on:** Fri, 03 June 2022, 06:24:18 »

Quote from: Puddsy on Thu, 02 June 2022, 17:37:01

Hi truecustom, sent you an email a bit ago.

I have checked spam folder but didn't find yours. Could you double check if you sent the email to mycnc2002 [at] mycnc.co.kr

TrueCustom · « **Reply #56 on:** Fri, 03 June 2022, 06:27:12 »

I updated batches. Please note that the few first batch can be moved to second batch based on stock status.
Thanks.

pixelpusher · « **Reply #57 on:** Fri, 03 June 2022, 09:26:22 »

The spreadsheet shows my order was cancelled, and I just got my PayPal transaction refunded. What happened?

TrueCustom · « **Reply #58 on:** Fri, 03 June 2022, 18:00:22 »

Quote from: pixelpusher on Fri, 03 June 2022, 09:26:22

The spreadsheet shows my order was cancelled, and I just got my PayPal transaction refunded. What happened?

I just realized a person asked me to cancel his order, but told me your order number instead of his.
My apologies.
I will revert back your order soon.

pixelpusher · « **Reply #59 on:** Fri, 03 June 2022, 19:09:52 »

Quote from: TrueCustom on Fri, 03 June 2022, 18:00:22

Quote from: pixelpusher on Fri, 03 June 2022, 09:26:22
The spreadsheet shows my order was cancelled, and I just got my PayPal transaction refunded. What happened?

I just realized a person asked me to cancel his order, but told me your order number instead of his.
My apologies.
I will revert back your order soon.

Thanks. I paid again

TrueCustom · « **Reply #60 on:** Mon, 06 June 2022, 05:52:22 »

Quote from: pixelpusher on Fri, 03 June 2022, 19:09:52

Quote from: TrueCustom on Fri, 03 June 2022, 18:00:22
Quote from: pixelpusher on Fri, 03 June 2022, 09:26:22
The spreadsheet shows my order was cancelled, and I just got my PayPal transaction refunded. What happened?

I just realized a person asked me to cancel his order, but told me your order number instead of his.
My apologies.
I will revert back your order soon.

Thanks. I paid again

Thank you! I updated the order status.

TrueCustom · « **Reply #61 on:** Wed, 15 June 2022, 06:35:39 »

Tracking numbers for the first batch are updated.
Friendly reminder that I can only guarantee damages for 7 days from the day you receive the items. Please open and test your items as soon as possible.
Thanks.

pixelpusher · « **Reply #62 on:** Tue, 21 June 2022, 13:20:17 »

Got my Sidewinder today! Arrived without any issues and PCB fully functioning.

TrueCustom · « **Reply #63 on:** Thu, 30 June 2022, 07:25:38 »

Quote from: pixelpusher on Tue, 21 June 2022, 13:20:17

Got my Sidewinder today! Arrived without any issues and PCB fully functioning.

TrueCustom · « **Reply #64 on:** Sun, 17 July 2022, 20:34:45 »

Currently, PCB assemblies have an issue. I am suspecting that the MCU(Atmega32u4 AU) are counterfeit even though I paid 3 time more than regular price.
It seems like Atmega32u4 are not available in the market. I will be searching for other IC distributor for 1~2 weeks, and if I cannot find genuine parts, I will cancel and refund the orders.

whizzard · « **Reply #65 on:** Sun, 17 July 2022, 20:43:07 »

that is bad news!! really hope you can figure it out. does that apply to all the 2nd shipment orders? good luck with the atmel chips if there is anything at all we can do to help let us know.

TrueCustom · « **Reply #66 on:** Mon, 18 July 2022, 05:22:05 »

Quote from: whizzard on Sun, 17 July 2022, 20:43:07

that is bad news!! really hope you can figure it out. does that apply to all the 2nd shipment orders? good luck with the atmel chips if there is anything at all we can do to help let us know.

Thank you for your kind words. I only have two assembled PCBs from previous batch, so maybe I can ship the first one from 2nd batch, but I may need to cancel others.
If someone find any IC distributor which has Atmega32u4 AU in their stock, please let me know.

Thanks.

kajahtaa · « **Reply #67 on:** Mon, 18 July 2022, 10:39:00 »

I don't mind a dead PCB.

Intending to commission a replacement anyway.

MyManMart · « **Reply #68 on:** Mon, 18 July 2022, 13:51:18 »

Haven't been checking geekhack as much so late to the party, but do you plan to have any extra Ravens? Or if anyone with a Raven doesn't want their spot anymore please reach out! Looks like there's only a few ravens on the list but always worth a shot!

whizzard · « **Reply #69 on:** Mon, 18 July 2022, 14:30:30 »

Mouser has some of those in stock today... https://www.mouser.com/ProductDetail/Microchip-Technology-Atmel/ATMEGA32U4-AU?qs=SSucg2PyLi7mKWjHIsNJ3w%3D%3D

*as of now they have 107 units in stock.

I always get genuine products from them.. if you need me to proxy let me know

TrueCustom · « **Reply #70 on:** Tue, 26 July 2022, 06:55:17 »

Quote from: whizzard on Mon, 18 July 2022, 14:30:30

Mouser has some of those in stock today... https://www.mouser.com/ProductDetail/Microchip-Technology-Atmel/ATMEGA32U4-AU?qs=SSucg2PyLi7mKWjHIsNJ3w%3D%3D

*as of now they have 107 units in stock.

I always get genuine products from them.. if you need me to proxy let me know

My sourcing partner ordered MCU from US which comes with a certificate. I am supposed to receive them in a week.

Quote from: MyManMart on Mon, 18 July 2022, 13:51:18

Haven't been checking geekhack as much so late to the party, but do you plan to have any extra Ravens? Or if anyone with a Raven doesn't want their spot anymore please reach out! Looks like there's only a few ravens on the list but always worth a shot!

I will let you know if someone cancel it.

TrueCustom · « **Reply #71 on:** Tue, 26 July 2022, 07:00:33 »

First of all, I am really sorry for the delay.
I am supposed to receive MCUs in a week, and I need at least 1~1.5 month to prepare shipping because of SMT process. I cannot confirm exact day at this moment.

If you want to cancel your order and refund it, Please send me an email with your order number.
Email mycnc2002[at]mycnc[dot]co[dot]kr

I am really sorry about the trouble again.

Thanks.

whizzard · « **Reply #72 on:** Tue, 26 July 2022, 11:07:44 »

Thank you very much, TrueCustom. I am so excited to get this keyboard as I think duck keyboards are second to none. Let us know if you need anything else or have any other issues, and don't worry about the delay.

suffeler · « **Reply #73 on:** Mon, 01 August 2022, 20:19:07 »

Hi truecustom, i have sent you an email a bit ago.

TrueCustom · « **Reply #74 on:** Thu, 04 August 2022, 12:21:57 »

Quote from: whizzard on Tue, 26 July 2022, 11:07:44

Thank you very much, TrueCustom. I am so excited to get this keyboard as I think duck keyboards are second to none. Let us know if you need anything else or have any other issues, and don't worry about the delay.

Thank you for your kind words.

TrueCustom · « **Reply #75 on:** Thu, 04 August 2022, 12:24:35 »

I received MCU from Mouser so It must be genuine.
I will test it in two week and start SMT process.

If you want cancel and refund your order, Please let me know it by the end of this week.
Currently, I got one cancelation request, and will cancel/refund all requests by this week together.

Thanks.

whizzard · « **Reply #76 on:** Thu, 04 August 2022, 17:20:03 »

Quote from: TrueCustom on Thu, 04 August 2022, 12:24:35

I received MCU from Mouser so It must be genuine.
I will test it in two week and start SMT process.

If you want cancel and refund your order, Please let me know it by the end of this week.
Currently, I got one cancelation request, and will cancel/refund all requests by this week together.

Thanks.

This is great news. Thank you for putting in the extra effort to get these put together and for keeping us updated. Much appreciated!

lanyusea · « **Reply #77 on:** Wed, 10 August 2022, 10:33:34 »

too late to reach this thread.

wondering if there is any Sidewinder left?

TrueCustom · « **Reply #78 on:** Wed, 10 August 2022, 12:11:53 »

Quote from: lanyusea on Wed, 10 August 2022, 10:33:34

too late to reach this thread.

wondering if there is any Sidewinder left?

I have few more but won't sell them until current round is done first.

Thanks.

kajahtaa · « **Reply #79 on:** Wed, 10 August 2022, 14:56:54 »

Would it be possible to get PCB edge cuts and drill holes?

If not no biggie. I'll figure it out later.

Thanks

TrueCustom · « **Reply #80 on:** Wed, 17 August 2022, 17:15:31 »

Quote from: kajahtaa on Wed, 10 August 2022, 14:56:54

Would it be possible to get PCB edge cuts and drill holes?

If not no biggie. I'll figure it out later.

Thanks

I am not sure what are PCB edge cuts and drill holes. Could you clarify it or attach a picture of them?

TrueCustom · « **Reply #81 on:** Wed, 17 August 2022, 17:18:10 »

I received sample MCU today and tested it. It looks good.
I will ship the items early next month(September) and update more accurate schedule in next week.
Thanks!

whizzard · « **Reply #82 on:** Wed, 17 August 2022, 17:19:07 »

That is great news, thanks for the update

TrueCustom · « **Reply #83 on:** Mon, 22 August 2022, 06:13:57 »

Order form is update. Please check here(https://docs.google.com/presentation/d/1x3NlPHEdrlTb-8d-ohoKhdCLFQbK_jrJN_nzI112u6Y/edit?usp=sharing)

whizzard · « **Reply #84 on:** Mon, 22 August 2022, 18:42:07 »

Great to see the orders going out!

layzen · « **Reply #85 on:** Sat, 27 August 2022, 05:19:25 »

Can't you get the plate drawings of the products you sold?
I hope you show it to github or anywhere

ALOHAKB · « **Reply #86 on:** Tue, 30 August 2022, 12:17:27 »

I think it's a very interesting layout, I'd love to get it if I get the chance

kajahtaa · « **Reply #87 on:** Tue, 30 August 2022, 17:46:18 »

Quote from: TrueCustom on Wed, 17 August 2022, 17:15:31

Quote from: kajahtaa on Wed, 10 August 2022, 14:56:54
Would it be possible to get PCB edge cuts and drill holes?

If not no biggie. I'll figure it out later.

Thanks

I am not sure what are PCB edge cuts and drill holes. Could you clarify it or attach a picture of them?

If you have the gerbers then the edge cuts and drill holes might look something like this.

If not. That's totally cool. I understand. I was only interested in the Sidewinder as that's what I joined.

Thanks

typischt · « **Reply #88 on:** Thu, 15 September 2022, 01:35:49 »

Any update on this?

Gesendet von iPhone mit Tapatalk

kajahtaa · « **Reply #89 on:** Thu, 15 September 2022, 19:13:55 »

oh yeah I will have a new address in a Month

TrueCustom · « **Reply #90 on:** Fri, 16 September 2022, 07:11:05 »

Quote from: kajahtaa on Tue, 30 August 2022, 17:46:18

Quote from: TrueCustom on Wed, 17 August 2022, 17:15:31
Quote from: kajahtaa on Wed, 10 August 2022, 14:56:54
Would it be possible to get PCB edge cuts and drill holes?

If not no biggie. I'll figure it out later.

Thanks

I am not sure what are PCB edge cuts and drill holes. Could you clarify it or attach a picture of them?

If you have the gerbers then the edge cuts and drill holes might look something like this.

If not. That's totally cool. I understand. I was only interested in the Sidewinder as that's what I joined.

Thanks

I don't fully understand it but I think I cannot do it since the PCB is already ready.

TrueCustom · « **Reply #91 on:** Fri, 16 September 2022, 07:16:55 »

I am really sorry about the delay.

All PCBs and parts are in a PCB assembly manufacturer, and I am still waiting for the process.
Once I receive the assembled PCBs, I will be able to ship them in a week.
I will update the thread once I receive them.

If I won't be able to ship them in this month(Sep, 2022), I will start to cancel/refund orders for those who want to cancel the order.

Thanks.

matchaboba · « **Reply #92 on:** Fri, 16 September 2022, 19:37:58 »

Quote from: TrueCustom on Fri, 16 September 2022, 07:16:55

I am really sorry about the delay.

All PCBs and parts are in a PCB assembly manufacturer, and I am still waiting for the process.
Once I receive the assembled PCBs, I will be able to ship them in a week.
I will update the thread once I receive them.

If I won't be able to ship them in this month(Sep, 2022), I will start to cancel/refund orders for those who want to cancel the order.

Thanks.

Thank you for the updates, much appreciated

TrueCustom · « **Reply #93 on:** Tue, 20 September 2022, 06:13:53 »

I can confirm that second batch will be shipped on Sep. 28, 2022.

I really appreciate your patience. I have been handling PCB/SMT over 20 years, so I experienced many edge cases and know how to handle them. However, this time, it went wrong every possible ways, so I was having very hard time to handle it. I am really sorry for the delay again.

I got another cancelation, so I have two canceled orders in total. If someone interested in them please contact me by email.

Thanks.

TrueCustom · « **Reply #94 on:** Tue, 20 September 2022, 19:07:24 »

I found I have enough MX aluminum and MX plastic plates. If you want to switch your plate kind, please let me know by email ASAP.

Thanks.

kajahtaa · « **Reply #95 on:** Thu, 29 September 2022, 12:26:39 »

So not shipping this week ?

TrueCustom · « **Reply #96 on:** Tue, 04 October 2022, 07:32:03 »

2022-10-04

All orders are shipped and the tracking numbers are updated here.(https://docs.google.com/presentation/d/1x3NlPHEdrlTb-8d-ohoKhdCLFQbK_jrJN_nzI112u6Y/edit?usp=sharing)
I only provide after-sale service for 7 days since you received your order. Please check if there is anything missing or defect in the time period.

Thanks

liberator · « **Reply #97 on:** Sat, 15 October 2022, 10:56:27 »

Went to flash my PCB for this board and the firmware located [in qmk](https://github.com/qmk/qmk_firmware/tree/4b630c46fed48f8a82641438029b628ec0dd5150/keyboards/duck/eagle_viper/v2) does not appear to work. The PCB is functional but does not register after flashing with the default or via keymaps.

Has anyone successfully flashed their PCB with QMK and can provide some help?

whizzard · « **Reply #98 on:** Sat, 15 October 2022, 22:58:45 »

Quote from: liberator on Sat, 15 October 2022, 10:56:27

Went to flash my PCB for this board and the firmware located [in qmk](https://github.com/qmk/qmk_firmware/tree/4b630c46fed48f8a82641438029b628ec0dd5150/keyboards/duck/eagle_viper/v2) does not appear to work. The PCB is functional but does not register after flashing with the default or via keymaps.

Has anyone successfully flashed their PCB with QMK and can provide some help?

I wish I could help you, but for all my duck keyboards, I always used his custom firmware... it runs on windows with a DFU driver. Let us know if you get it figured out with QMK as I saw some of his boards (not any I ever had before) on the list but never tried it myself.

liberator · « **Reply #99 on:** Sun, 16 October 2022, 09:57:18 »

Quote from: whizzard on Sat, 15 October 2022, 22:58:45

Quote from: liberator on Sat, 15 October 2022, 10:56:27
Went to flash my PCB for this board and the firmware located [in qmk](https://github.com/qmk/qmk_firmware/tree/4b630c46fed48f8a82641438029b628ec0dd5150/keyboards/duck/eagle_viper/v2) does not appear to work. The PCB is functional but does not register after flashing with the default or via keymaps.

Has anyone successfully flashed their PCB with QMK and can provide some help?

I wish I could help you, but for all my duck keyboards, I always used his custom firmware... it runs on windows with a DFU driver. Let us know if you get it figured out with QMK as I saw some of his boards (not any I ever had before) on the list but never tried it myself.

Where do you get his custom firmware from? Are you still able to configure the keymap with it? I'm fine with DFU, so long as it's customizable.

News:

Author Topic: [GB] Duck 60% Raven/Sidewinder (Read 36973 times)