Dumbass question warning - what's the difference between the regular version of the Fjell and the Pro? I assume one is top mounted is not by what is said, but I honestly have no idea what that means (I buy all my boards either assembled or have friends kindly assemble them for me as I don't solder).
Either way, all three offerings seem fantastic, I'd like a Fjell of any kind and the "simple case" looks very promising too. Plus, I'm more than willing to support any EU based businesses whenever I can.
Dumbass question warning - what's the difference between the regular version of the Fjell and the Pro? I assume one is top mounted is not by what is said, but I honestly have no idea what that means (I buy all my boards either assembled or have friends kindly assemble them for me as I don't solder).
Either way, all three offerings seem fantastic, I'd like a Fjell of any kind and the "simple case" looks very promising too. Plus, I'm more than willing to support any EU based businesses whenever I can.
The difference is the Fjell Pro is for the Happy Hacking Keyboard layout, which a lot of people prefer because it's small but has the functionality of a full-size keyboard
The difference is the Fjell Pro is for the Happy Hacking Keyboard layout, which a lot of people prefer because it's small but has the functionality of a full-size keyboard
You're slightly incorrect here.
Top mount isn't purely for aesthetics, but for typing feel too. There's a big difference between a tray mount Case (Plate/PCB attach to the bottom of the case) versus a top mounted case (Plate attached to the top case, PCB floats free). Most high quality customs tend to be top mounted.
I could elaborate more, but in sure someone will jump in and give their experiences with both! I'm a huge fan of top mounted cases, however.
Edit: I also believe he may offer both top mounted HHKB and top mounted 60% if this is chosen! Fringers crossed!
Just a question, can I use a 3rd party PCB and stabs with a top-mounted case? or do they need to be made specifically for them to be compatible?I want third party support for these.
Just a question, can I use a 3rd party PCB and stabs with a top-mounted case? or do they need to be made specifically for them to be compatible?I want third party support for these.
Sent fra min D6603 via Tapatalk
run em all people will buy them
don't run fjell in a size other than 60 though, it'll look weird
also i don't like fjell pro, i think it goes against the look of normal fjell
run em all people will buy them
don't run fjell in a size other than 60 though, it'll look weird
also i don't like fjell pro, i think it goes against the look of normal fjell
I'm curious why you think the pro would look different than the normal fjell. The Fjell Pro has both full 60% and HHKB layouts, albeit with different tops.
run em all people will buy them
don't run fjell in a size other than 60 though, it'll look weird
also i don't like fjell pro, i think it goes against the look of normal fjell
I'm curious why you think the pro would look different than the normal fjell. The Fjell Pro has both full 60% and HHKB layouts, albeit with different tops.
Does regular Fjell have HHKB layout?
Also screw holes.
I think those are both "me" things though.
Show Image(http://i.imgur.com/x9LHMKf.jpg)Show Image(http://i.imgur.com/NrKOJJS.jpg)Show Image(http://i.imgur.com/ioFj6YP.jpg)
I want FJELL R2 case! Is it going to be on massdrop.com? Where can I sign up?
Fjell Pro HHKB. Yes please. I want.
Show Image(http://i.imgur.com/NrKOJJS.jpg)
what is the case on the right? I can see "hhkb" in the corner but I've never seen an hhkb case like this
ahh I see, thanks!Show Image(http://i.imgur.com/NrKOJJS.jpg)
what is the case on the right? I can see "hhkb" in the corner but I've never seen an hhkb case like this
Must be HHKB Professional BT(Bluetooth) for sure.
The simple case is just what I need. You have my vote for this one again.Show Image(http://i.imgur.com/x9LHMKf.jpg)Show Image(http://i.imgur.com/NrKOJJS.jpg)Show Image(http://i.imgur.com/ioFj6YP.jpg)
...not big on the steep angle... ....Anyone else second this?...
Very... comfjelling...not big on the steep angle... ....Anyone else second this?...
If it's possible to make the FJELL style flat and with adjustable feet, but without compromising the look, the result could be very compelling :)
aaaaand i'm still waiting for my fjell r1 to be shipped ._.Nothing will start here before you have FJELL r1 in your hands!
Would love a navy blue optionSeconded
I'd be all over the Simple case HHKB...I'm not sure the simple case would be able to have HHKB layout since it's a drop in case. A HHKB drop in case would need a custom PCB to fit the built in blockers and I think that LeandreaN has said he wants these cases to fit universal parts.
The Revo 60% HHKB case (https://geekhack.org/index.php?topic=88750.0) is a topmounted "poker compatible" universal case, so it can be done, but it is a bit more complex. But that is not a drop in case thoI'd be all over the Simple case HHKB...I'm not sure the simple case would be able to have HHKB layout since it's a drop in case. A HHKB drop in case would need a custom PCB to fit the built in blockers and I think that LeandreaN has said he wants these cases to fit universal parts.
The Revo 60% HHKB case (https://geekhack.org/index.php?topic=88750.0) is a topmounted "poker compatible" universal case, so it can be done, but it is a bit more complex. But that is not a drop in case thoI'd be all over the Simple case HHKB...I'm not sure the simple case would be able to have HHKB layout since it's a drop in case. A HHKB drop in case would need a custom PCB to fit the built in blockers and I think that LeandreaN has said he wants these cases to fit universal parts.
Show Image(http://i.imgur.com/kCKFMMl.jpg)Show Image(http://i.imgur.com/WdL7l7o.jpg)Show Image(http://i.imgur.com/Nlk1VeG.jpg)
It's not :)Show Image(http://i.imgur.com/kCKFMMl.jpg)Show Image(http://i.imgur.com/WdL7l7o.jpg)Show Image(http://i.imgur.com/Nlk1VeG.jpg)
Love the new simple case, I hope this isn't replacing it!
Show Image(http://i.imgur.com/kCKFMMl.jpg)Show Image(http://i.imgur.com/WdL7l7o.jpg)Show Image(http://i.imgur.com/Nlk1VeG.jpg)
!?Show Image(http://i.imgur.com/kCKFMMl.jpg)Show Image(http://i.imgur.com/WdL7l7o.jpg)Show Image(http://i.imgur.com/Nlk1VeG.jpg)
LZCE?
!?Show Image(http://i.imgur.com/kCKFMMl.jpg)Show Image(http://i.imgur.com/WdL7l7o.jpg)Show Image(http://i.imgur.com/Nlk1VeG.jpg)
LZCE?
Sent fra min D6603 via Tapatalk
Cool 😎!?Show Image(http://i.imgur.com/kCKFMMl.jpg)Show Image(http://i.imgur.com/WdL7l7o.jpg)Show Image(http://i.imgur.com/Nlk1VeG.jpg)
LZCE?
Sent fra min D6603 via Tapatalk
https://geekhack.org/index.php?topic=48396.0
Yeah, this is cool :)It's not :)Show Image(http://i.imgur.com/kCKFMMl.jpg)Show Image(http://i.imgur.com/WdL7l7o.jpg)Show Image(http://i.imgur.com/Nlk1VeG.jpg)
Love the new simple case, I hope this isn't replacing it!
Sent fra min D6603 via Tapatalk
Show Image(http://i.imgur.com/kCKFMMl.jpg)Show Image(http://i.imgur.com/WdL7l7o.jpg)Show Image(http://i.imgur.com/Nlk1VeG.jpg)
Show Image(http://i.imgur.com/kCKFMMl.jpg)Show Image(http://i.imgur.com/WdL7l7o.jpg)Show Image(http://i.imgur.com/Nlk1VeG.jpg)
Show Image(http://i.imgur.com/kCKFMMl.jpg)Show Image(http://i.imgur.com/WdL7l7o.jpg)Show Image(http://i.imgur.com/Nlk1VeG.jpg)
Show Image(http://i.imgur.com/kCKFMMl.jpg)Show Image(http://i.imgur.com/WdL7l7o.jpg)Show Image(http://i.imgur.com/Nlk1VeG.jpg)
This is 75 case ?
Will also be experimenting with a POM simple case :)That's gonna be awesome.
Will also be experimenting with a POM simple case :)Interesting. But don't POM only come in black?
But don't POM only come in black?POM is intrinsically opaque white, due to its high crystalline composition, but it is available in all colors. (source) (https://en.wikipedia.org/wiki/Polyoxymethylene)
Will also be experimenting with a POM simple case :)Interesting. But don't POM only come in black?
Show Image(http://i.imgur.com/Q7VVSId.jpg)Show Image(http://i.imgur.com/1Xq5NDQ.jpg)
I have some design plans to reduce loudness and will most likely sample with 4 mounting points first.Show Image(http://i.imgur.com/Q7VVSId.jpg)Show Image(http://i.imgur.com/1Xq5NDQ.jpg)
Looks nice, but are you sure 4 mounting points will be enough? That's why the pingmaster is so loud.
I think there are 6 mounting points (one on each side) but this is still a good point. I was wondering if a seamless side would be possible.Show Image(http://i.imgur.com/Q7VVSId.jpg)Show Image(http://i.imgur.com/1Xq5NDQ.jpg)
Looks nice, but are you sure 4 mounting points will be enough? That's why the pingmaster is so loud.
Correct me if im wrong but i saw there are 6 mounting points total, 2 at the rear of the caseI have some design plans to reduce loudness and will most likely sample with 4 mounting points first.Show Image(http://i.imgur.com/Q7VVSId.jpg)Show Image(http://i.imgur.com/1Xq5NDQ.jpg)
Looks nice, but are you sure 4 mounting points will be enough? That's why the pingmaster is so loud.
This is the one I needShow Image(http://i.imgur.com/Q7VVSId.jpg)Show Image(http://i.imgur.com/1Xq5NDQ.jpg)
The black version of the Simple case have slightly rounded corners and edges. Is that specific to the HHKB-layout or will of be available for the regular version as well?That's not a HHKB-simple case. That's an actual HHKB Pro 2. Zoom in on the photo and you can see the print.
I think there are 6 mounting points (one on each side) but this is still a good point. I was wondering if a seamless side would be possible.Show Image(http://i.imgur.com/Q7VVSId.jpg)Show Image(http://i.imgur.com/1Xq5NDQ.jpg)
Looks nice, but are you sure 4 mounting points will be enough? That's why the pingmaster is so loud.
I think there are 6 mounting points (one on each side) but this is still a good point. I was wondering if a seamless side would be possible.Show Image(http://i.imgur.com/Q7VVSId.jpg)Show Image(http://i.imgur.com/1Xq5NDQ.jpg)
Looks nice, but are you sure 4 mounting points will be enough? That's why the pingmaster is so loud.
It is 6, I was wrong. I'd go for 8 personally, but 1) I'm not designing this board and 2) I don't know much about designing boards in the first place.
The black version of the Simple case have slightly rounded corners and edges. Is that specific to the HHKB-layout or will of be available for the regular version as well?That's not a HHKB-simple case. That's an actual HHKB Pro 2. Zoom in on the photo and you can see the print.
This. I Want.Show Image(http://i.imgur.com/Q7VVSId.jpg)Show Image(http://i.imgur.com/1Xq5NDQ.jpg)
And we need a name for the "simple" case. The current name is boring
And we need a name for the "simple" case. The current name is boringElv.
fjord
And we need a name for the "simple" case. The current name is boring
fjord
fjord
Fjord has a nice ring to it, the river to the Fjell's mountains :))
I personally kind of like "Elv" and "Laks", since I have another project under Fjord and Fjor is very similar naming wise.
Will there be holes for the USB ports as well for the HHKB style case?
Sent from my iPhone using Tapatalk
Oh thanks for the heads up! I was looking for a HHKB replacement case and thought this would be great.Will there be holes for the USB ports as well for the HHKB style case?
Sent from my iPhone using Tapatalk
Its not meant to be a replacement case for your actual hhkb, it's still going to be a 60% case for Cherry MX PCBs, just with blocked corners so you can use the HHKB layout
The simple looks awesome. Can it take any PCB or is there only a certain one that will fit?Any standard 60% will fit, like any GH60 compatible, Poker etc...
I'd be in for the simple case. Will the pcb sit lower in the case so the keycaps look more tucked like on the fjell?
The idea is to have this case higher profile than other cases so you cant see the gap.
Hi Leandren,
Any chance of making the plate cutouts for the Fjell Pro Normal split-space compatible? Similar to the BananaSplit60, like this:Show Image(https://cdn.shopify.com/s/files/1/1369/4793/files/eyJ1cmwiOiJodHRwczovL2kuaW1ndXIuY29tL3J2akQwak0ucG5nIn0_1024x1024.png?v=1496291286)
Or like this:Show Image(http://i.imgur.com/0y4ofK4.png)
Thanks!
This top down picture really doesn't say much about the case. Could you take some all around?Show Image(http://i.imgur.com/ZuDv053.jpg)
Can you include more pics of that red simple case?
This top down picture really doesn't say much about the case. Could you take some all around?Show Image(http://i.imgur.com/ZuDv053.jpg)
This is a factory photo, I will provide many more when I have the case :)Great. I'm looking forward to it.
Any thoughts or concerns? Please let me know.
That's actually the dark grey case but the white balance is off. I'm on your side though, please give us a dark blue case LeandreN!Any thoughts or concerns? Please let me know.
Are color options still TBD? I'd like to get the simple case in dark blue like the FJELL in your sig.
That's actually the dark grey case but the white balance is off. I'm on your side though, please give us a dark blue case LeandreN!
Hello!
Some updates.
I have gotten a ton of emails and requests regarding the FJELL Group Buy, from you here and even other vendors. As of now, I can't handle enough orders to please everyone.
If I can find a vendor that is able to handle FJELL orders, I will be able to go that route. I will make sure it is safe for every participant. Manufacturing will go through my factory anyway. Everything will still be LeandreN style with Mekanisk branding, but it would allow me to have better fulfillment for more cases. This might change later, as Mekanisk grows.
Also, the simple case is ready for mass production very soon.Show Image(http://i.imgur.com/ZuDv053.jpg)
Any thoughts or concerns? Please let me know.
William
Hello!
Some updates.
I have gotten a ton of emails and requests regarding the FJELL Group Buy, from you here and even other vendors. As of now, I can't handle enough orders to please everyone.
If I can find a vendor that is able to handle FJELL orders, I will be able to go that route. I will make sure it is safe for every participant. Manufacturing will go through my factory anyway. Everything will still be LeandreN style with Mekanisk branding, but it would allow me to have better fulfillment for more cases. This might change later, as Mekanisk grows.
Also, the simple case is ready for mass production very soon.Show Image(http://i.imgur.com/ZuDv053.jpg)
Any thoughts or concerns? Please let me know.
William
That's a beautiful red. I'm totally in for one, I hope the FJELL Pro also comes in Red!
I do have a huge request - Your plates offer switchtop removal, however having the huge gaps on the side aren't really the best for stability, especially with pulling keycaps off of Clears.
Would it be possible to change the switchtop style to the one that also holds the switch on the sides, and only gaps in the 4 corners? Like the M65 plate?
I would provide an image here, but I'm not too sure how. I can message you an example if you'd like. :)
LeandreN - I'm interested in picking up a Fjell when the next GB runs. You mentioned earlier about supporting third party PCBs, this would be a huge bonus for myself as I'm looking for a high quality case to house an Alps64 PCB. Will your plates support Alps switches in combination with this PCB, or will I have to source my own plate to match my PCB?
LeandreN - I'm interested in picking up a Fjell when the next GB runs. You mentioned earlier about supporting third party PCBs, this would be a huge bonus for myself as I'm looking for a high quality case to house an Alps64 PCB. Will your plates support Alps switches in combination with this PCB, or will I have to source my own plate to match my PCB?I'm not leandren, but since you need one plate per layout/stabilizer combo for Alps I'm pretty sure they won't. The Alps plate/stabilizer stuff is a real pita.
I'm in for a Simple HHKB and a Fjell Pro HHKB for sure.Pretty sure there's not going to be a simple hhkb case. It would take a non-standard pcb to fit.
I'm in for a Simple HHKB and a Fjell Pro HHKB for sure.Pretty sure there's not going to be a simple hhkb case. It would take a non-standard pcb to fit.
That's an interesting idea. Would definitely need to be prototyped to make sure the pcb standoff in the bottom row doesn't interfere. That and possibly the USB port.I'm in for a Simple HHKB and a Fjell Pro HHKB for sure.Pretty sure there's not going to be a simple hhkb case. It would take a non-standard pcb to fit.
It might be possible to get it in with a lot of angling but it's super hard to say without trying.
I'm in for a Simple HHKB and a Fjell Pro HHKB for sure.Pretty sure there's not going to be a simple hhkb case. It would take a non-standard pcb to fit.
It might be possible to get it in with a lot of angling but it's super hard to say without trying.
That's an interesting idea. Would definitely need to be prototyped to make sure the pcb standoff in the bottom row doesn't interfere. That and possibly the USB port.
It would make for an interesting feeling spacebar though. I imagine it would be a softer bottom out without the standoff being so close.Ah I forgot about the bottom standoff. I doubt it'd work with one.That's an interesting idea. Would definitely need to be prototyped to make sure the pcb standoff in the bottom row doesn't interfere. That and possibly the USB port.I'm in for a Simple HHKB and a Fjell Pro HHKB for sure.Pretty sure there's not going to be a simple hhkb case. It would take a non-standard pcb to fit.
It might be possible to get it in with a lot of angling but it's super hard to say without trying.
It would make for an interesting feeling spacebar without the bottom standoff. I imagine it would be a softer bottom out without the standoff being so close.Ah I forgot about the bottom standoff. I doubt it'd work with one.That's an interesting idea. Would definitely need to be prototyped to make sure the pcb standoff in the bottom row doesn't interfere. That and possibly the USB port.I'm in for a Simple HHKB and a Fjell Pro HHKB for sure.Pretty sure there's not going to be a simple hhkb case. It would take a non-standard pcb to fit.
It might be possible to get it in with a lot of angling but it's super hard to say without trying.
Edit: Kawasaki brings up a very good manufacturing point. Unless it's 3D printed, there's no way to make that shape without a 2 piece design.
I'm in for a Simple HHKB and a Fjell Pro HHKB for sure.Pretty sure there's not going to be a simple hhkb case. It would take a non-standard pcb to fit.
It might be possible to get it in with a lot of angling but it's super hard to say without trying.
Without the usb port being flush or there being a quarter inch gap I don't see a way for a 1 piece case and I as well can't really see how the machining could be doneI'm in for a Simple HHKB and a Fjell Pro HHKB for sure.Pretty sure there's not going to be a simple hhkb case. It would take a non-standard pcb to fit.
It might be possible to get it in with a lot of angling but it's super hard to say without trying.
Uhh, just wondering, but how would you even get that machined?
I'm in for a Simple HHKB and a Fjell Pro HHKB for sure.Pretty sure there's not going to be a simple hhkb case. It would take a non-standard pcb to fit.
It might be possible to get it in with a lot of angling but it's super hard to say without trying.
Uhh, just wondering, but how would you even get that machined?
Any updates on when the Klippe might launch?Next week, or the week after hopefully :)
Any updates on when the Klippe might launch?Next week, or the week after hopefully :)
1upkeyboards.com is the one that will decide the time and date. I will try to keep you all posted.
Looking forward to get this first batch sold.
Planning a EU group but now, but I have no date or information on that now.
Sent from my ONEPLUS A5000 using Tapatalk
Just finished up the designs for the classic Fjell(small updates).Any updates on when the Klippe might launch?Next week, or the week after hopefully :)
1upkeyboards.com is the one that will decide the time and date. I will try to keep you all posted.
Looking forward to get this first batch sold.
Planning a EU group but now, but I have no date or information on that now.
Sent from my ONEPLUS A5000 using Tapatalk
Any rough timeline for the Fjell HHKB (pro)?
Any updates on when the Klippe might launch?Next week, or the week after hopefully :)
1upkeyboards.com is the one that will decide the time and date. I will try to keep you all posted.
Looking forward to get this first batch sold.
Planning a EU group but now, but I have no date or information on that now.
Sent from my ONEPLUS A5000 using Tapatalk
Any updates on when the Klippe might launch?Next week, or the week after hopefully :)
1upkeyboards.com is the one that will decide the time and date. I will try to keep you all posted.
Looking forward to get this first batch sold.
Planning a EU group but now, but I have no date or information on that now.
Sent from my ONEPLUS A5000 using Tapatalk
I think grey, and purple at least. There might be some other colors, but I can't remember right now.Any updates on when the Klippe might launch?Next week, or the week after hopefully :)
1upkeyboards.com is the one that will decide the time and date. I will try to keep you all posted.
Looking forward to get this first batch sold.
Planning a EU group but now, but I have no date or information on that now.
Sent from my ONEPLUS A5000 using Tapatalk
Do you know what colors will be offered for the Simple/Klippe ?
I think grey, and purple at least. There might be some other colors, but I can't remember right now.Any updates on when the Klippe might launch?Next week, or the week after hopefully :)
1upkeyboards.com is the one that will decide the time and date. I will try to keep you all posted.
Looking forward to get this first batch sold.
Planning a EU group but now, but I have no date or information on that now.
Sent from my ONEPLUS A5000 using Tapatalk
Do you know what colors will be offered for the Simple/Klippe ?
Yes the MSRP is 179 USDI think grey, and purple at least. There might be some other colors, but I can't remember right now.Any updates on when the Klippe might launch?Next week, or the week after hopefully :)
1upkeyboards.com is the one that will decide the time and date. I will try to keep you all posted.
Looking forward to get this first batch sold.
Planning a EU group but now, but I have no date or information on that now.
Sent from my ONEPLUS A5000 using Tapatalk
Do you know what colors will be offered for the Simple/Klippe ?
Okay, Grey would probably be my top choice anyways.
Sorry if it's been said already, but has there been a price decided on yet?
Yes the MSRP is 179 USDI think grey, and purple at least. There might be some other colors, but I can't remember right now.Any updates on when the Klippe might launch?Next week, or the week after hopefully :)
1upkeyboards.com is the one that will decide the time and date. I will try to keep you all posted.
Looking forward to get this first batch sold.
Planning a EU group but now, but I have no date or information on that now.
Sent from my ONEPLUS A5000 using Tapatalk
Do you know what colors will be offered for the Simple/Klippe ?
Okay, Grey would probably be my top choice anyways.
Sorry if it's been said already, but has there been a price decided on yet?
1upkeyboards will have these ready in stock. There is limited stock of course.Yes the MSRP is 179 USDI think grey, and purple at least. There might be some other colors, but I can't remember right now.Any updates on when the Klippe might launch?Next week, or the week after hopefully :)
1upkeyboards.com is the one that will decide the time and date. I will try to keep you all posted.
Looking forward to get this first batch sold.
Planning a EU group but now, but I have no date or information on that now.
Sent from my ONEPLUS A5000 using Tapatalk
Do you know what colors will be offered for the Simple/Klippe ?
Okay, Grey would probably be my top choice anyways.
Sorry if it's been said already, but has there been a price decided on yet?
And, last question.
Is there going to be a limit on how many people can join the GB like how the last one was?
1upkeyboards will have these ready in stock. There is limited stock of course.Yes the MSRP is 179 USDI think grey, and purple at least. There might be some other colors, but I can't remember right now.Any updates on when the Klippe might launch?Next week, or the week after hopefully :)
1upkeyboards.com is the one that will decide the time and date. I will try to keep you all posted.
Looking forward to get this first batch sold.
Planning a EU group but now, but I have no date or information on that now.
Sent from my ONEPLUS A5000 using Tapatalk
Do you know what colors will be offered for the Simple/Klippe ?
Okay, Grey would probably be my top choice anyways.
Sorry if it's been said already, but has there been a price decided on yet?
And, last question.
Is there going to be a limit on how many people can join the GB like how the last one was?
Hi there, Is there any way to get an invite to see the Mekanisk.co website? I've been trying to order ALPS springs for a while. Tried PMing Leandren and but there's no response. Apologies if this isn't the right venue to askIt's not up yet, but you can email me to order.
1upkeyboards will have these ready in stock. There is limited stock of course.
I like your name lol1upkeyboards will have these ready in stock. There is limited stock of course.
Wait, what, 1UP Keyboards will be the one selling the Klippe? What about us in the EU?
I like your name lol1upkeyboards will have these ready in stock. There is limited stock of course.
Wait, what, 1UP Keyboards will be the one selling the Klippe? What about us in the EU?
Wait, what, 1UP Keyboards will be the one selling the Klippe? What about us in the EU?As mentioned previously — LeandreN will be running a group buy for Europeans at a later date.
I think grey, and purple at least. There might be some other colors, but I can't remember right now.Any updates on when the Klippe might launch?Next week, or the week after hopefully :)
1upkeyboards.com is the one that will decide the time and date. I will try to keep you all posted.
Looking forward to get this first batch sold.
Planning a EU group but now, but I have no date or information on that now.
Sent from my ONEPLUS A5000 using Tapatalk
Do you know what colors will be offered for the Simple/Klippe ?
GreyI think grey, and purple at least. There might be some other colors, but I can't remember right now.Any updates on when the Klippe might launch?Next week, or the week after hopefully :)
1upkeyboards.com is the one that will decide the time and date. I will try to keep you all posted.
Looking forward to get this first batch sold.
Planning a EU group but now, but I have no date or information on that now.
Sent from my ONEPLUS A5000 using Tapatalk
Do you know what colors will be offered for the Simple/Klippe ?
Is the one in the pictures you've posted grey, or is it kind of a olive green color?
It would be awesome to see a light olive green as a color option.
GreyI think grey, and purple at least. There might be some other colors, but I can't remember right now.Any updates on when the Klippe might launch?Next week, or the week after hopefully :)
1upkeyboards.com is the one that will decide the time and date. I will try to keep you all posted.
Looking forward to get this first batch sold.
Planning a EU group but now, but I have no date or information on that now.
Sent from my ONEPLUS A5000 using Tapatalk
Do you know what colors will be offered for the Simple/Klippe ?
Is the one in the pictures you've posted grey, or is it kind of a olive green color?
It would be awesome to see a light olive green as a color option.
Will all the variations be ran as different GBs? So first klippe and then fjell normal/pro?
Very interested simple case. And what does "Klippe" mean?
From what I know it was always just the case, and in the last updates it was also only the case : https://geekhack.org/index.php?topic=88279.msg2478011#msg2478011Very interested simple case. And what does "Klippe" mean?
Think it means cliff.
And sorry to ask again, but any word on whether the $180 USD is the kit price or case price LeandreN? Cause iirc the original goal was $200 for a kit.
From what I know it was always just the case, and it the last updates it was also only the case : https://geekhack.org/index.php?topic=88279.msg2478011#msg2478011Very interested simple case. And what does "Klippe" mean?
Think it means cliff.
And sorry to ask again, but any word on whether the $180 USD is the kit price or case price LeandreN? Cause iirc the original goal was $200 for a kit.
180$/200$ for a kit (case+PCB+plate) is more taobao/aliexpress area...
180 USD is the retail price for the case only.
Other pricing is not confirmed.
From what I know it was always just the case, and in the last updates it was also only the case : https://geekhack.org/index.php?topic=88279.msg2478011#msg2478011
180$/200$ for a kit (case+PCB+plate) is more taobao/aliexpress area...
Damn the FJELL is so sexy in white: https://imgur.com/a/DuJMN
Man this color really makes me want to get in on R2Keep in mind this a cerakote finish done by a third party. However, the FJELL in white is stunning and would love if LeandreN was able to propose it in the future round (I am not keeping my hopes up though).
Man this color really makes me want to get in on R2Keep in mind this a cerakote finish done by a third party. However, the FJELL in white is stunning and would love if LeandreN was able to propose it in the future round (I am not keeping my hopes up though).
Hi there, Is there any way to get an invite to see the Mekanisk.co website? I've been trying to order ALPS springs for a while. Tried PMing Leandren and but there's no response. Apologies if this isn't the right venue to askIt's not up yet, but you can email me to order.
Support@mekanisk.co
Man this color really makes me want to get in on R2Keep in mind this a cerakote finish done by a third party. However, the FJELL in white is stunning and would love if LeandreN was able to propose it in the future round (I am not keeping my hopes up though).
the color and texture looks like it is done by MAO, quite similar to Able and Skog. So no worry, it is quite common and widely used. But really easy to have scratches and will look more obvious than tradition anodizing
What aluminum material do you use to make case?6061 for the first round.
Thanks!What aluminum material do you use to make case?6061 for the first round.
Man this color really makes me want to get in on R2Keep in mind this a cerakote finish done by a third party. However, the FJELL in white is stunning and would love if LeandreN was able to propose it in the future round (I am not keeping my hopes up though).
the color and texture looks like it is done by MAO, quite similar to Able and Skog. So no worry, it is quite common and widely used. But really easy to have scratches and will look more obvious than tradition anodizing
MAO is a harder surface than anodizing. You may be thinking about powder coating. MAO for aluminum creates a thin corundum oxide layer. Natural corundum is also know as ruby or sapphire. The only thing that should scratch mao is diamond.
the color and texture looks like it is done by MAO, quite similar to Able and Skog.
the color and texture looks like it is done by MAO, quite similar to Able and Skog.
It's written in my message you quoted: it's a cerkote (ceramic) finish : )
the color and texture looks like it is done by MAO, quite similar to Able and Skog.
It's written in my message you quoted: it's a cerkote (ceramic) finish : )
yes I know.
I showed the image to a guy working with an aluminum factory where many customized mechanical keyboards are produced, he told me it is MAO.
Then I do some Google and I found cerkote and MAO should mean the same thing. cerkote is the name of the result, while MAO is the name of the processing.
Whatever I'm not too care about the fact actually cause I didn't see it in real life, so I may be wrong. :p
My favorite is the anodizing white FJELL. I saw some before, they are really damn beautiful.
the color and texture looks like it is done by MAO, quite similar to Able and Skog.
It's written in my message you quoted: it's a cerkote (ceramic) finish : )
yes I know.
I showed the image to a guy working with an aluminum factory where many customized mechanical keyboards are produced, he told me it is MAO.
Then I do some Google and I found cerkote and MAO should mean the same thing. cerkote is the name of the result, while MAO is the name of the processing.
Whatever I'm not too care about the fact actually cause I didn't see it in real life, so I may be wrong. :p
My favorite is the anodizing white FJELL. I saw some before, they are really damn beautiful.
This is 100% false. Cerakote is a thin film ceramic coating. It is sprayed on and then cured (baked) hard.
Micro-Arc Oxidation or Plasma Electrolytic Oxidation is a chemical process like anodizing. It involves submerging the metal in an electrolytic solution and blasted with high voltage which causes plasma to form and a crystalline ceramic oxide layer to form into the surface of the metal through subsuface Oxidation.
It yields a smoother finish than any anodizing and is ~5x harder than hard anodizing (dark grey like pots and pans). If you scratch or chip a PEO case you are trying really hard. PEO is one of the hardening techniques used to coat aluminum parts to make them viable to replace steel parts. It's REALLY durable.
I will wait for EU group buy. I hope it happens before Brexit.
Is everything going to be much more expensive after Brexit?
Is everything going to be much more expensive after Brexit? Not just keyboards but food etc.At this point your guess is as good as any one else's. Regardless, I'm pretty sure LeanreN will have something going before 2019.
Hi Leandren, will the Klippe fit the Brass ANSI plate I got from you?Yes
Sent from my iPhone using Tapatalk
Definitely in for the pro in hhkb flavor :thumb:
Keep the Fjell Pro hype training rolling!:)
They look so delicious. When will those simple cases be available on 1up? Any rough estimate?
In for FJELL r2 for the AEK64 I'm building! I signed up to geekhack just to be sure I don't miss it!That sentence makes no sense at all.
The user is pre-committing himself to the yet-to-be announced second round (R2) of the Fjell case, which he plans to use for his AEK64 custom keyboard build.
The user registered to the Geekhack forum for the sole purpose of keeping up to date with any new Fjell news, in the hopes of not missing the announcement of a second round.
The user is pre-committing himself to the yet-to-be announced second round (R2) of the Fjell case, which he plans to use for his AEK64 custom keyboard build.
The user registered to the Geekhack forum for the sole purpose of keeping up to date with any new Fjell news, in the hopes of not missing the announcement of a second round.
In for FJELL r2 for the AEK64 I'm building! I signed up to geekhack just to be sure I don't miss it!
The user is pre-committing himself to the yet-to-be announced second round (R2) of the Fjell case, which he plans to use for his AEK64 custom keyboard build.
The user registered to the Geekhack forum for the sole purpose of keeping up to date with any new Fjell news, in the hopes of not missing the announcement of a second round.
Excellent deduction, sir
This guy knows what's up
In for FJELL r2 for the AEK64 I'm building! I signed up to geekhack just to be sure I don't miss it!That sentence makes no sense at all.
In for FJELL r2 for the AEK64 I'm building! I signed up to geekhack just to be sure I don't miss it!The user is pre-committing himself to the yet-to-be announced second round (R2) of the Fjell case, which he plans to use for his AEK64 custom keyboard build.
The user registered to the Geekhack forum for the sole purpose of keeping up to date with any new Fjell news, in the hopes of not missing the announcement of a second round.Excellent deduction, sirThis guy knows what's up
These people right here... make sense. alot of sense. like, a really obvious amount of sense. i'm not exaggerating.
This guy...In for FJELL r2 for the AEK64 I'm building! I signed up to geekhack just to be sure I don't miss it!That sentence makes no sense at all.Show Image(https://i.imgur.com/v64bCSL.jpg)
In for FJELL r2 for the AEK64 I'm building! I signed up to geekhack just to be sure I don't miss it!The user is pre-committing himself to the yet-to-be announced second round (R2) of the Fjell case, which he plans to use for his AEK64 custom keyboard build.
The user registered to the Geekhack forum for the sole purpose of keeping up to date with any new Fjell news, in the hopes of not missing the announcement of a second round.Excellent deduction, sirThis guy knows what's up
These people right here... make sense. alot of sense. like, a really obvious amount of sense. i'm not exaggerating.
This guy...In for FJELL r2 for the AEK64 I'm building! I signed up to geekhack just to be sure I don't miss it!That sentence makes no sense at all.Show Image(https://i.imgur.com/v64bCSL.jpg)
Damn, you must be having a really great morning, lol
But seriously, how will you build an AEK64 (which is a case) with a Fjell (which is also a case)?
https://github.com/dennistimmermann/aek64Oh, that kinda makes sense, who would have thought that there are many different things that are named the same, I was thinking about this case with integrated plate:
In for FJELL r2 for the AEK64 I'm building! I signed up to geekhack just to be sure I don't miss it!The user is pre-committing himself to the yet-to-be announced second round (R2) of the Fjell case, which he plans to use for his AEK64 custom keyboard build.
The user registered to the Geekhack forum for the sole purpose of keeping up to date with any new Fjell news, in the hopes of not missing the announcement of a second round.Excellent deduction, sirThis guy knows what's up
These people right here... make sense. alot of sense. like, a really obvious amount of sense. i'm not exaggerating.
This guy...In for FJELL r2 for the AEK64 I'm building! I signed up to geekhack just to be sure I don't miss it!That sentence makes no sense at all.Show Image(https://i.imgur.com/v64bCSL.jpg)
Damn, you must be having a really great morning, lol
But seriously, how will you build an AEK64 (which is a case) with a Fjell (which is also a case)?
Will the Pro be more expensive?It's pretty certain the Pro will be more expensive.
tray vs top-mount: Top-mount is superior in every way - right?
Will the Pro be more expensive?It's pretty certain the Pro will be more expensive.
tray vs top-mount: Top-mount is superior in every way - right?
Whether it's superior depends on the traits you view as more important.
Top-mounted cases tend to feel more solid since the plate is attached to the case. Though if it is improperly designed it can also have pinging issues when the plate transfers the keystroke to the case. They are also capable of coming in the HHKB layout with Universal PCB's (GH60). They also tend to be more expensive since the multiple parts makes it more complicated to produce.
Tray-mounted cases offer a different feel since the PCB is attached to the case instead of the plate. IMO this gives the keyboard a softer feel. This completely avoids the pinging issue that improperly designed Top-mounted cases can have. Tray-mounted cases can also be easily swapped because they use universal plates. While Top-mounted cases use plates that are specific to them. They also tend to be cheaper because they can be made in one piece.
One isn't better than the other. There is only the one that best fits what you want out of a keyboard.
1up sure is taken their time
Sent from my iPhone using Tapatalk
Klippe is up on 1upkeyboard btwPurple at the bottom of the page.
Purple is sold out. Wow. That was quick. You did say you planned to keep manufacturing these, correct?
Purple is sold out. Wow. That was quick. You did say you planned to keep manufacturing these, correct?
What he said^
Urgh $50USD shipping.
Anyone else in Australia (preferably Sydney) want to combine an order?
I knew this **** was going to happen! Only black cases left (no thank you).This. I have been waiting for ages for the announcement, only for them to announce the sale and run out of them while i'm sleeping.
Would have loved for this to be a normal GB :(
I knew this **** was going to happen! Only black cases left (no thank you).This. I have been waiting for ages for the announcement, only for them to announce the sale and run out of them while i'm sleeping.
Would have loved for this to be a normal GB :(
I knew this **** was going to happen! Only black cases left (no thank you).
Would have loved for this to be a normal GB :(
I had no idea when it was going to go live sorryI knew this **** was going to happen! Only black cases left (no thank you).
Would have loved for this to be a normal GB :(
Yep, a bit of advance notice on when the sale was going to go live would have been fantastic :(
I had no idea when it was going to go live sorryI knew this **** was going to happen! Only black cases left (no thank you).
Would have loved for this to be a normal GB :(
Yep, a bit of advance notice on when the sale was going to go live would have been fantastic :(
Any news on FJELL HHKB/Pro? Really interested in that.
Has anyone's Klippe shipped yet? Asking for a friend.Not yet!
:)
Has anyone's Klippe shipped yet? Asking for a friend.
:)
In progress...:eek:
Before finishing, sandblasting and anodizingShow Image(https://uploads.tapatalk-cdn.com/20170925/e1780ba910ae03de2649fbb7f24b94ef.jpg)
In progress...Beautiful.
Before finishing, sandblasting and anodizingShow Image(https://uploads.tapatalk-cdn.com/20170925/e1780ba910ae03de2649fbb7f24b94ef.jpg)
In progress...
Before finishing, sandblasting and anodizingShow Image(https://uploads.tapatalk-cdn.com/20170925/e1780ba910ae03de2649fbb7f24b94ef.jpg)
In progress...Gorgeous!!! Exactly like the original renders you posted! Although I must say it makes me appreciate having the r1 weight as well :)
Before finishing, sandblasting and anodizingShow Image(https://uploads.tapatalk-cdn.com/20170925/e1780ba910ae03de2649fbb7f24b94ef.jpg)
In progress...
Before finishing, sandblasting and anodizingShow Image(https://uploads.tapatalk-cdn.com/20170925/e1780ba910ae03de2649fbb7f24b94ef.jpg)
Amazing. I hope a Red FJELL shows up!
In progress...
Before finishing, sandblasting and anodizingShow Image(https://uploads.tapatalk-cdn.com/20170925/e1780ba910ae03de2649fbb7f24b94ef.jpg)
Amazing. I hope a Red FJELL shows up!
You mean green right?
In progress...
Before finishing, sandblasting and anodizingShow Image(https://uploads.tapatalk-cdn.com/20170925/e1780ba910ae03de2649fbb7f24b94ef.jpg)
Amazing. I hope a Red FJELL shows up!
You mean green right?
Even though green is my fav color, I'm not sure about a green case. Feels like the keycaps will be hard to match.
Even though green is my fav color, I'm not sure about a green case. Feels like the keycaps will be hard to match.
Even though green is my fav color, I'm not sure about a green case. Feels like the keycaps will be hard to match.
Terminal, green ePBT.
In progress...
Before finishing, sandblasting and anodizingShow Image(https://uploads.tapatalk-cdn.com/20170925/e1780ba910ae03de2649fbb7f24b94ef.jpg)
Amazing. I hope a Red FJELL shows up!
You mean green right?
In progress...
Before finishing, sandblasting and anodizingShow Image(https://uploads.tapatalk-cdn.com/20170925/e1780ba910ae03de2649fbb7f24b94ef.jpg)
Amazing. I hope a Red FJELL shows up!
You mean green right?
https://www.reddit.com/r/mechanicalkeyboards/comments/71rpdo/_/That's rough. 1up really screwed up by making the product page live a whole night in advance. In lighter news, just got notice that mine is shipping today :D
Here is the official word on the Klippe sale on 1upkeyboards. Seems like they sold fast.
https://www.reddit.com/r/mechanicalkeyboards/comments/71rpdo/_/How many units did they have in stock?
Here is the official word on the Klippe sale on 1upkeyboards. Seems like they sold fast.
25https://www.reddit.com/r/mechanicalkeyboards/comments/71rpdo/_/How many units did they have in stock?
Here is the official word on the Klippe sale on 1upkeyboards. Seems like they sold fast.
That's quite successful. Congrats to both.25https://www.reddit.com/r/mechanicalkeyboards/comments/71rpdo/_/How many units did they have in stock?
Here is the official word on the Klippe sale on 1upkeyboards. Seems like they sold fast.
That black pcb, I must know more my friend!?Show Image(https://i.imgur.com/PrlroHc.jpg)Show Image(https://i.imgur.com/fdNBI8m.jpg)
can't wait to start this build!
That black pcb, I must know more my friend!?Show Image(https://i.imgur.com/PrlroHc.jpg)Show Image(https://i.imgur.com/fdNBI8m.jpg)
can't wait to start this build!
Glad you posted this. Most other GH60's I've seen elsewhere are all white and have the LED's on the north side of the switch.That black pcb, I must know more my friend!?Show Image(https://i.imgur.com/PrlroHc.jpg)Show Image(https://i.imgur.com/fdNBI8m.jpg)
can't wait to start this build!
gh60 baybeeeeee https://techkeys.us/collections/accessories/products/gh60
the picture is green but they only have black in stock.
Glad you posted this. Most other GH60's I've seen elsewhere are all white and have the LED's on the north side of the switch.That black pcb, I must know more my friend!?Show Image(https://i.imgur.com/PrlroHc.jpg)Show Image(https://i.imgur.com/fdNBI8m.jpg)
can't wait to start this build!
gh60 baybeeeeee https://techkeys.us/collections/accessories/products/gh60
the picture is green but they only have black in stock.
yeah most of the satan pcbs are white, along with other colors for other derivatives, but AFAIK right now the only available legit GH60s are black and available through techkeys.Satan GH60 are actual GH60 but based on ver A (you can tell by the fact that the electrical components are placed on the switches' side).
yeah most of the satan pcbs are white, along with other colors for other derivatives, but AFAIK right now the only available legit GH60s are black and available through techkeys.
yeah most of the satan pcbs are white, along with other colors for other derivatives, but AFAIK right now the only available legit GH60s are black and available through techkeys.
Wait so what's the green gh60 I got from techkeys?
Wait so what's the green gh60 I got from techkeys?A rev C, the latest revision made.
Show Image(https://i.imgur.com/edEoMIb.png)
Klippe, soon.
(see newsletter email)
Show Image(https://i.imgur.com/PrlroHc.jpg)Show Image(https://i.imgur.com/fdNBI8m.jpg)
can't wait to start this build!
Are you going to put your gmk blank set on here?Show Image(https://i.imgur.com/PrlroHc.jpg)Show Image(https://i.imgur.com/fdNBI8m.jpg)
can't wait to start this build!
Found this in my yard today!
https://imgur.com/a/BzDwS
Gave it a nice home.
Show Image(https://i.imgur.com/edEoMIb.png)
Klippe, soon.
(see newsletter email)
I didn't get an email :(
Is it possible to get a klippe without pcb/plate, so case only? If yes, will it be compatible with the brass plate on the mekanisk site?It only comes in case only. No PCB or plate are included.
And it's compatible with any pok3r plate/PCB, so yes.Is it possible to get a klippe without pcb/plate, so case only? If yes, will it be compatible with the brass plate on the mekanisk site?It only comes in case only. No PCB or plate are included.
The most important part of the newsletter... Green, Silver and... WHITE are also options :OWhere is the newsletter signup?
My poor wallet.
yeah most of the satan pcbs are white, along with other colors for other derivatives, but AFAIK right now the only available legit GH60s are black and available through techkeys.Satan GH60 are actual GH60 but based on ver A (you can tell by the fact that the electrical components are placed on the switches' side).
Falbatech (https://falba.tech/product/gh60-ver-c-partially-assembled-with-electronics-cable/) also sells genuine GH60 ver C.
yeah most of the satan pcbs are white, along with other colors for other derivatives, but AFAIK right now the only available legit GH60s are black and available through techkeys.
Wait so what's the green gh60 I got from techkeys?
Are you going to put your gmk blank set on here?Show Image(https://i.imgur.com/PrlroHc.jpg)Show Image(https://i.imgur.com/fdNBI8m.jpg)
can't wait to start this build!
Sent from my SM-G900V using Tapatalk
Show Image(https://i.imgur.com/PrlroHc.jpg)Show Image(https://i.imgur.com/fdNBI8m.jpg)
can't wait to start this build!
Can you take some booty shots ? I’m curious to see more details. The case looks dope as **** !
Mekanisk.coThe most important part of the newsletter... Green, Silver and... WHITE are also options :OWhere is the newsletter signup?
My poor wallet.
Show Image(https://i.imgur.com/PrlroHc.jpg)Show Image(https://i.imgur.com/fdNBI8m.jpg)
can't wait to start this build!
GH60 rev C (https://falba.tech/product/gh60-ver-c-partially-assembled-with-electronics-cable/).MoreShow Image(https://i.imgur.com/PrlroHc.jpg)Show Image(https://i.imgur.com/fdNBI8m.jpg)
can't wait to start this build!
What PCB is this?
I'm just curious to see also the "dark side of the moon" :cool: in 99% of the cases people just post glamor shots when I'm always interested in the build details and the things you almost never see...Show Image(https://i.imgur.com/PrlroHc.jpg)Show Image(https://i.imgur.com/fdNBI8m.jpg)
can't wait to start this build!
Can you take some booty shots ? I’m curious to see more details. The case looks dope as **** !
sure i'll snap a few more. there's nothing on the bottom except machined cutouts for the bumpons though.
Man, it's been hard getting in touch with Leandren, but I sure wouldn't mind a Fjell Pro.I've been moving lately, been going through mail now, however if I have missed something please mail again.
Ugh, those are the worst, I understand (and I do actually remember now in one of our previous emails you mentioned you were really busy with apartment hunting).Man, it's been hard getting in touch with Leandren, but I sure wouldn't mind a Fjell Pro.I've been moving lately, been going through mail now, however if I have missed something please mail again.
Support@mekanisk.co
Iirc you wanted to buy a plate?
The most important part of the newsletter... Green, Silver and... WHITE are also options :OWhat newsletter if I may ask?
My poor wallet.
The most important part of the newsletter... Green, Silver and... WHITE are also options :OWhat newsletter if I may ask?
My poor wallet.
Sent from my ONEPLUS A5000 using Tapatalk
Sweet thanks!The most important part of the newsletter... Green, Silver and... WHITE are also options :OWhat newsletter if I may ask?
My poor wallet.
Sent from my ONEPLUS A5000 using Tapatalk
Sign up on Mekanisk.co :)
Signed up to the newsletter too late, wonder what it says....Soon the Klippe GB will be launched for EU and Worldwide, no date is set, just that there will be a GB soon. Hope it helps :thumb:
Show Image(https://i.imgur.com/edEoMIb.png)
Klippe, soon.
(see newsletter email)
Signed up to the newsletter too late, wonder what it says....Soon the Klippe GB will be launched for EU and Worldwide, no date is set, just that there will be a GB soon. Hope it helps :thumb:
Signed up to the newsletter too late, wonder what it says....Soon the Klippe GB will be launched for EU and Worldwide, no date is set, just that there will be a GB soon. Hope it helps :thumb:
Thanks! I will continue waiting for the Fjell Pro I guess.....
White Fjell pro with GMK red honey. Yes, please.
White Fjell pro with GMK red honey. Yes, please.
Are there any real photos yet?
Any updates, we have missed the Nov 20th date as stated on the website for preordersLittle delayed however I am working on getting everything ready. 1up needs to get their cases first...
White Fjell pro with GMK red honey. Yes, please.Yes. Spread the love for white finish!
It looks like the Simple HHKB case has the asymmetrical blockers on the bottom? If so, I'm in for that. If the Fjell Pro is available with the asymmetrical HHKB bottom row blockers, I'd get one of those, too.There is no simple HHKB case, in the photo the Klippe is compared to a HHKB. The Simple/Klippe has only full bottom row.
White Fjell pro with GMK red honey. Yes, please.Yes. Spread the love for white finish!
Please go to Mekanisk.co
50 is not the max. It will be open until I've had enough orders that we can handle.Please go to Mekanisk.co
How long will it be open? Or is the 50 the max?
What about Fjell r2? Is it still happening :(Oh yes, however this gb will happen first!
I can't wait to see the Mekanisk grey in person, if it's good, and I bet it is, I'm gonna get a Fjell with the same colour.
So is the gray one different from the gray color sold on 1upkeyboards, or are they the same color?Slight difference, this one is aimed at being dark and cool(not that warm/red) however there are none that knows exactly how it will look.
will this be shipped from EU?
I've had to pay import tax before on Leandren stuff, so don't count on it.will this be shipped from EU?
Norway isn't in the EU, so no, but I think import wise they're considered EU? You'd have to research it :p
Since Norway is not part of the EU, any sale from a Norwegian business to a customer in the EU will be considered an export from Norway. Norwegian exports are exempt from VAT. However, local VAT should be added when the goods are cleared through customs in the EU state of destination.(source (http://europa.eu/youreurope/business/vat-customs/cross-border/norway/index_en.htm))
Similarly, when goods are exported from an EU state to Norwegian customers, the seller should not charge local VAT on the sale. Norwegian VAT will be added when the goods are cleared through customs in Norway.
does the Pro Ansi brass plate support 1.5u/1u/1.5u bottom row with 7u spacebar? or do i have to go with universal?It looks like it supports the bottom row you want. Especially since it’s mostly long rectangles at the bottom instead of single holes.
does the Pro Ansi brass plate support 1.5u/1u/1.5u bottom row with 7u spacebar? or do i have to go with universal?It looks like it supports the bottom row you want. Especially since it’s mostly long rectangles at the bottom instead of single holes.
does the Pro Ansi brass plate support 1.5u/1u/1.5u bottom row with 7u spacebar? or do i have to go with universal?It looks like it supports the bottom row you want. Especially since it’s mostly long rectangles at the bottom instead of single holes.
Awesome, thanks! Yea I looked at it and it seem like it does with the open bottom row and wider cutouts for the stabs but thought I’d get some advice.
Hey Leandren, any chance the limited edition PCB (https://mekanisk.co/collections/pre-order/products/copy-of-pcb-gon-nerd60-mekanisk-limited-edition) can be included in the Klippe Premium package?It is! I'll clarify on the page!
Will this be open by Friday (when i get paid :thumb:)
https://mekanisk.co/collections/pre-order/products/copy-of-pcb-gon-nerd60-mekanisk-limited-edition
Does programming software work on MacOS or Linux?
Does programming software work on MacOS or Linux?The GUI tool (http://www.gonskeyboardworks.com/manuals/110-nerdy-gui.html) works on Windows alone while command line works on Linux as well. Alternatively you can replace the bootloader (https://deskthority.net/wiki/Converting_NerD60_to_TMK) and use TMK/QMK.
TalkingTree knows what he is talking about.Does programming software work on MacOS or Linux?The GUI tool (http://www.gonskeyboardworks.com/manuals/110-nerdy-gui.html) works on Windows alone while command line works on Linux as well. Alternatively you can replace the bootloader (https://deskthority.net/wiki/Converting_NerD60_to_TMK) and use TMK/QMK.
Hey Leandren, any chance the limited edition PCB (https://mekanisk.co/collections/pre-order/products/copy-of-pcb-gon-nerd60-mekanisk-limited-edition) can be included in the Klippe Premium package?It is! I'll clarify on the page!
Maybe its waiting on TM? (Totally just guessing tho)Finishing up Klippe now. There are still modifications needed for Fjell Pro, however the new revision Fjell classic is ready .
Maybe its waiting on TM? (Totally just guessing tho)Finishing up Klippe now. There are still modifications needed for Fjell Pro, however the new revision Fjell classic is ready .
I am not waiting for TM, however it might not happen until after TM has launched.
Maybe its waiting on TM? (Totally just guessing tho)Finishing up Klippe now. There are still modifications needed for Fjell Pro, however the new revision Fjell classic is ready .
I am not waiting for TM, however it might not happen until after TM has launched.
Maybe its waiting on TM? (Totally just guessing tho)Finishing up Klippe now. There are still modifications needed for Fjell Pro, however the new revision Fjell classic is ready .
I am not waiting for TM, however it might not happen until after TM has launched.
It's probably something obvious, but what's TM referring to here?
Maybe its waiting on TM? (Totally just guessing tho)Finishing up Klippe now. There are still modifications needed for Fjell Pro, however the new revision Fjell classic is ready .
I am not waiting for TM, however it might not happen until after TM has launched.
It's probably something obvious, but what's TM referring to here?Show Image(https://i.imgur.com/K6uvLPs.png)
why does the RAMA tkl look so damn perfect?? Is the key spacing altered or something?
Anything happen in the last few weeks regarding Fjell R2 I may have missed? I'm still saving up for R2 :D
Anything happen in the last few weeks regarding Fjell R2 I may have missed? I'm still saving up for R2 :D
From a reddit comment:
(Attachment Link)
Anything happen in the last few weeks regarding Fjell R2 I may have missed? I'm still saving up for R2 :D
From a reddit comment:
(Attachment Link)
Anything happen in the last few weeks regarding Fjell R2 I may have missed? I'm still saving up for R2 :D
From a reddit comment:
(Attachment Link)
Hopefully with the pro version offered as well.
U guys hyping it too much man. He said in the summer, for all we know it could be summer 2030.I'm okay with waiting as my wallet recovers from GMK Violet Tendencies, SA Pulse, RAMA M60-A and SA Troubled Minds lol
So ready for that lovely purple R2.
When is the GB?
Received mine today, just put WASD Code 67 on as mock-up and it is so beautiful.
Thanks to Mekanisk
(https://live.staticflickr.com/65535/48179224802_5f8f56f1a9_b.jpg) (https://flic.kr/p/2gpr7ZG)
Oh you posted here! Glad I had notifications on, because those photos are awesome. Can I use them?Show ImageShow ImageShow ImageShow ImageShow ImageShow ImageShow ImageShow ImageShow ImageReceived mine today, just put WASD Code 67 on as mock-up and it is so beautiful.
Thanks to Mekanisk
(https://live.staticflickr.com/65535/48179224802_5f8f56f1a9_b.jpg) (https://flic.kr/p/2gpr7ZG)
(https://live.staticflickr.com/65535/48179154666_26f79ecfd0_b.jpg) (https://flic.kr/p/2gpqL9s)
(https://live.staticflickr.com/65535/48179154866_bae069cfeb_b.jpg) (https://flic.kr/p/2gpqLcU)
(https://live.staticflickr.com/65535/48179226252_1d6da8cde7_b.jpg) (https://flic.kr/p/2gpr8qG)
(https://live.staticflickr.com/65535/48179225127_a50625344f_b.jpg) (https://flic.kr/p/2gpr86i)
(https://live.staticflickr.com/65535/48179225527_e97fb04f78_b.jpg) (https://flic.kr/p/2gpr8dc)
(https://live.staticflickr.com/65535/48179225507_2514623f63_b.jpg) (https://flic.kr/p/2gpr8cR)
(https://live.staticflickr.com/65535/48179225712_db40f60dcc_b.jpg) (https://flic.kr/p/2gpr8go)
(https://live.staticflickr.com/65535/48179225607_c30d521c16_b.jpg) (https://flic.kr/p/2gpr8ez)
(https://live.staticflickr.com/65535/48179226327_b010c04241_b.jpg) (https://flic.kr/p/2gpr8rZ)
Can I buy one?Mekanisk.co , coming later.
Can I buy one?Mekanisk.co , coming later.
YesCan I buy one?Mekanisk.co , coming later.
Will there be another run of Klippe?
YesCan I buy one?Mekanisk.co , coming later.
Will there be another run of Klippe?
Soon. Working on Fjell Round 4 at the moment.YesCan I buy one?Mekanisk.co , coming later.
Will there be another run of Klippe?
Awesome, any time frame?
what is after rd4? is the pro coming soon?
what is after rd4? is the pro coming soon?
https://mekanisk.co/products/fjell-pro