Author Topic: [GB] LZ CLS s x h (Classic 60) : [Production now]  (Read 21407 times)

profanum429, poolside, Hako, Spaghetti and 3 Guests are viewing this topic.

Offline LifeZ

  • Thread Starter
  • Posts: 540
  • LifeZone
Re: [GB] LZ CLS s x h (Classic 60) : [Order Check]
« Reply #200 on: Tue, 06 February 2018, 20:27:31 »
Is it possible to test with an Alps64 PCB? Thanks.

yes, no problem. 
Many 60PCB USB locations are slightly different, but no problem.
Thank you for the confirmation!
ALPS  60%(Alps64 pcb Test ok)
[ Specified attachment is not available ]
« Last Edit: Tue, 06 February 2018, 20:30:07 by LifeZ »

Offline LifeZ

  • Thread Starter
  • Posts: 540
  • LifeZone
Re: [GB] LZ CLS s x h (Classic 60) : [Order]
« Reply #201 on: Fri, 09 February 2018, 05:53:49 »
Since I guess we're going to see more and more PCBs using the USB Type-C connectors: is the cutout wide enough for those? (~8.4mm)
I see,
I think, type-c connectors is no problem.
and This gb in. i can test.
https://geekhack.org/index.php?topic=93685.0

60% There are many kinds of pcb. And the position of the connector is slightly different.

If you have a pcb dxf layout, I can check.
confirmed compatible pcb.
L3 finger60(leeku pcb), Nerd60, GH60, POCKER, Bface(R), Zeal60, DO60 and iGK61(not yet, Need confirmation)
update.
confirmed compatible pcb.
L3 finger60(leeku pcb), Nerd60, GH60, POCKER, Bface(R)(W), Zeal60, DO60 and iGK61(iGK64 is custom layout plate)
Sample PCB : iGK61 (backlight RGB LEDs)
188479-0
188481-1
188483-2
« Last Edit: Fri, 09 February 2018, 05:59:34 by LifeZ »

Online profanum429

  • Posts: 47
  • Location: Florida, USA
Re: [GB] LZ CLS s x h (Classic 60) : [Order Check]
« Reply #202 on: Fri, 09 February 2018, 08:27:44 »
I sent a follow up email earlier about the plate list in my custom layout picture, just wanted to make sure I don't miss the cut off for order check!

Offline kekstee

  • Posts: 238
  • Location: Germany
Re: [GB] LZ CLS s x h (Classic 60) : [Order Check]
« Reply #203 on: Fri, 09 February 2018, 09:01:51 »
Thank you for the confirmation on those PCBs. That's a nice service.

This is going to be a long wait... :D

More
HHKB Pro2 BN (silenced); Hammer GH60 (52g silent Red); TX-CP (52g vintage Black); IBM SSK 1392980; IBM 5291 'Bigfoot';
HHKB Pro2 W; NerD60 (ErgoClear); DZ60 (57g vintage Black); Alps64 (SKCM Orange); Realforce 87USW; Filco Majestouch-2 (MX-Brown); IBM Model M 1391403; G80-1000HFD; G80-1000HAD

Offline ihalatch

  • Posts: 539
  • Location: Adelaide, Australia
Re: [GB] LZ CLS s x h (Classic 60) : [Order Check]
« Reply #204 on: Fri, 09 February 2018, 18:47:40 »
Since I guess we're going to see more and more PCBs using the USB Type-C connectors: is the cutout wide enough for those? (~8.4mm)
I see,
I think, type-c connectors is no problem.
and This gb in. i can test.
https://geekhack.org/index.php?topic=93685.0

60% There are many kinds of pcb. And the position of the connector is slightly different.

If you have a pcb dxf layout, I can check.
confirmed compatible pcb.
L3 finger60(leeku pcb), Nerd60, GH60, POCKER, Bface(R), Zeal60, DO60 and iGK61(not yet, Need confirmation)
update.
confirmed compatible pcb.
L3 finger60(leeku pcb), Nerd60, GH60, POCKER, Bface(R)(W), Zeal60, DO60 and iGK61(iGK64 is custom layout plate)
Sample PCB : iGK61 (backlight RGB LEDs)
(Attachment Link)
(Attachment Link)
(Attachment Link)


Damn you LZ. I'm broke and can't afford it right now. This is one beautiful keyboard.

Online poolside

  • Posts: 674
  • Location: On the deck
Re: [GB] LZ CLS s x h (Classic 60) : [Order Check]
« Reply #205 on: Sat, 10 February 2018, 08:22:17 »
Hi LZ, I have just sent you an email regarding a last minute change to my order  ;D

Online amnesia0287

  • Formerly Amnesia
  • Posts: 998
Re: [GB] LZ CLS s x h (Classic 60) : [Order Check]
« Reply #206 on: Sat, 10 February 2018, 20:52:16 »
Is the ordercheck sheet going to update? I sent my details in on the 9th, but I'm not sure how to tell if everything was okay :D

Online midnight2903

  • Posts: 284
  • Location: Singapore
Re: [GB] LZ CLS s x h (Classic 60) : [Order Check]
« Reply #207 on: Sat, 10 February 2018, 21:33:39 »
How the **** did I miss this?!?!

Offline LifeZ

  • Thread Starter
  • Posts: 540
  • LifeZone
Re: [GB] LZ CLS s x h (Classic 60) : [Invoice]
« Reply #208 on: Mon, 12 February 2018, 22:51:29 »
Calculations are incorrect due to formula errors in some orders. You have sent an updated invoice.
The purchase order calculation is incorrect and has been fixed.

Online donut_sauce

  • Posts: 148
Re: [GB] LZ CLS s x h (Classic 60) : [Invoice]
« Reply #209 on: Mon, 12 February 2018, 23:13:30 »
_
« Last Edit: Mon, 12 February 2018, 23:20:57 by donut_sauce »

Online donut_sauce

  • Posts: 148
Re: [GB] LZ CLS s x h (Classic 60) : [Invoice]
« Reply #210 on: Mon, 12 February 2018, 23:14:56 »
Hey LZ. So I already sent a payment, can I just pay the difference?

Edit: never mind, just saw that you refunded.
« Last Edit: Mon, 12 February 2018, 23:16:39 by donut_sauce »

Online amnesia0287

  • Formerly Amnesia
  • Posts: 998
Re: [GB] LZ CLS s x h (Classic 60) : [Invoice]
« Reply #211 on: Wed, 14 February 2018, 12:41:42 »
Welp. Paid, now to forget all about it so I don’t just wait for it the whole time >_<.


Sent from my iPhone using Tapatalk

Offline Depeche

  • Posts: 5
  • Location: California
Re: [GB] LZ CLS s x h (Classic 60) : [Invoice]
« Reply #212 on: Wed, 14 February 2018, 12:57:29 »
Welp. Paid, now to forget all about it so I don’t just wait for it the whole time >_<.


Sent from my iPhone using Tapatalk

Got any tips for that?

Online sroop

  • Posts: 29
Re: [GB] LZ CLS s x h (Classic 60) : [Invoice]
« Reply #213 on: Wed, 14 February 2018, 13:17:19 »
Welp. Paid, now to forget all about it so I don’t just wait for it the whole time >_<.


Sent from my iPhone using Tapatalk

Got any tips for that?

1)Get into multiple GBs at the same time
2)eventually get overwhelmed trying to keep track of one particular keyboard
3)become homeless and begin a life of crime to supply your addiction
4) ? ? ?
5)Profit

« Last Edit: Wed, 14 February 2018, 13:22:32 by sroop »

Offline Depeche

  • Posts: 5
  • Location: California
Re: [GB] LZ CLS s x h (Classic 60) : [Invoice]
« Reply #214 on: Wed, 14 February 2018, 13:27:15 »
Welp. Paid, now to forget all about it so I don’t just wait for it the whole time >_<.


Sent from my iPhone using Tapatalk

Got any tips for that?

1)Get into multiple GBs at the same time
2)eventually get overwhelmed trying to keep track of one particular keyboard
3)become homeless and begin a life of crime to supply your addiction
4) ? ? ?
5)Profit

Genius. Now I just need to figure out where to store the keyboards at the homeless stage.

Offline odd

  • Posts: 212
Re: [GB] LZ CLS s x h (Classic 60) : [Invoice]
« Reply #215 on: Wed, 14 February 2018, 14:11:37 »
Can you add another pcb and polycarb plate to my order. I also dont remember if i added a bag if not can you add that as well? Thank you

Online CommonCurt

  • * Esteemed Elder
  • Posts: 4334
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: [GB] LZ CLS s x h (Classic 60) : [Invoice]
« Reply #216 on: Wed, 14 February 2018, 23:23:57 »
Invoice paid  :thumb:
Some of my Keyboards -->
More
OTD Koala:  lubed 62g Old MX-Blacks    |    KMAC2:  lubed 62g Tactile MX-Greys    |    X60:  lubed 62g Vintage MX-Blacks    |    GON NerD 60:  lubed 62g Old MX-Clears    |    Filco MJ2 (Beige) TKL's:  lubed 62g MX-Clears  &  lubed  62g Vintage MX-Blacks    |    IBM '91 SSK
                                
       
WTB/WTS ---->
More

Offline aaron6301

  • Posts: 480
  • Location: Orange County, CA
  • Pixel Pusher
Re: [GB] LZ CLS s x h (Classic 60) : [Invoice]
« Reply #217 on: Thu, 15 February 2018, 10:32:39 »
LZ,

I sent a follow up email regarding shipping address confirmation. Can you please have a look and verify?

Once verified, I can make my payment.

Thanks

Offline airs

  • Posts: 293
  • Location: Seattle, WA, USA
Re: [GB] LZ CLS s x h (Classic 60) : [Invoice]
« Reply #218 on: Thu, 15 February 2018, 11:53:51 »
I'm confused - for the HHKB version, how will the plate (I opted for CF) and PCB fit? Will I need to do some dremeling?

Edit: I guess it'll just sit under the blockers and not be an issue?
« Last Edit: Thu, 15 February 2018, 11:56:19 by airs »
Octagon v2, LZ CLS

Offline xondat

  • i'm not a star
  • * Maker
  • Posts: 4151
  • Location: United Kingdom
Re: [GB] LZ CLS s x h (Classic 60) : [Invoice]
« Reply #219 on: Thu, 15 February 2018, 11:57:37 »
I'm confused - for the HHKB version, how will the plate (I opted for CF) and PCB fit? Will I need to do some dremeling?

Edit: I guess it'll just sit under the blockers and not be an issue?

Edit is correct.

Offline aaron6301

  • Posts: 480
  • Location: Orange County, CA
  • Pixel Pusher
Re: [GB] LZ CLS s x h (Classic 60) : [Invoice]
« Reply #220 on: Wed, 21 February 2018, 12:42:16 »
Paid, thanks LZ.

Offline theillumedpanda

  • Posts: 223
  • Don't point that gun at me - I'm an unpaid intern!
Re: [GB] LZ CLS s x h (Classic 60) : [Invoice]
« Reply #221 on: Sat, 24 February 2018, 14:30:15 »
Paid the invoice 2 days ago.

Online pixelpusher

  • Formerly known as reececonrad
  • Posts: 1756
  • Location: Tennessee - USA
Re: [GB] LZ CLS s x h (Classic 60) : [Invoice]
« Reply #222 on: Sat, 24 February 2018, 14:32:31 »
Let us know if there are any unpaid.  I might pick one up
:)

Offline airs

  • Posts: 293
  • Location: Seattle, WA, USA
Re: [GB] LZ CLS s x h (Classic 60) : [Invoice]
« Reply #223 on: Mon, 26 February 2018, 13:35:20 »
Paid! Thanks LZ.
Octagon v2, LZ CLS

Offline theillumedpanda

  • Posts: 223
  • Don't point that gun at me - I'm an unpaid intern!
Re: [GB] LZ CLS s x h (Classic 60) : [Invoice]
« Reply #224 on: Mon, 26 February 2018, 15:45:24 »
Let us know if there are any unpaid.  I might pick one up
You‘re trying to pick up all the nice boards, aren‘t you? Now you know why I wanted to transfer my 268 AG spot ;)

Online amnesia0287

  • Formerly Amnesia
  • Posts: 998
Re: [GB] LZ CLS s x h (Classic 60) : [Invoice]
« Reply #225 on: Mon, 26 February 2018, 18:21:00 »
Let us know if there are any unpaid.  I might pick one up
You‘re trying to pick up all the nice boards, aren‘t you? Now you know why I wanted to transfer my 268 AG spot ;)

 :eek:

Offline theillumedpanda

  • Posts: 223
  • Don't point that gun at me - I'm an unpaid intern!
Re: [GB] LZ CLS s x h (Classic 60) : [Invoice]
« Reply #226 on: Mon, 26 February 2018, 18:23:39 »
Let us know if there are any unpaid.  I might pick one up
You‘re trying to pick up all the nice boards, aren‘t you? Now you know why I wanted to transfer my 268 AG spot ;)

 :eek:
Wasn‘t purely because of that, but I somewhat had to decide between the two. Looking forward to this either way!

Online pixelpusher

  • Formerly known as reececonrad
  • Posts: 1756
  • Location: Tennessee - USA
Re: [GB] LZ CLS s x h (Classic 60) : [Invoice]
« Reply #227 on: Mon, 26 February 2018, 19:50:23 »
Let us know if there are any unpaid.  I might pick one up
You‘re trying to pick up all the nice boards, aren‘t you? Now you know why I wanted to transfer my 268 AG spot ;)

Maaaaaybe....
:)

Offline xondat

  • i'm not a star
  • * Maker
  • Posts: 4151
  • Location: United Kingdom
Re: [GB] LZ CLS s x h (Classic 60) : [Invoice]
« Reply #228 on: Tue, 27 February 2018, 03:56:31 »
Let us know if there are any unpaid.  I might pick one up
You‘re trying to pick up all the nice boards, aren‘t you? Now you know why I wanted to transfer my 268 AG spot ;)

:'(

Lucky Reece ;)

Online cheunjm

  • Posts: 10
Re: [GB] LZ CLS s x h (Classic 60) : [Production now]
« Reply #229 on: Tue, 20 March 2018, 03:16:04 »
If anyone wants to let go of their hhkb version, please let me know! Happy to take your spot.

Sent from my SM-G955N using Tapatalk


Offline nzhoward

  • Posts: 20
Re: [GB] LZ CLS s x h (Classic 60) : [Production now]
« Reply #230 on: Fri, 23 March 2018, 14:22:31 »
I have a spot for standard 60% version, black I believe. Pm me on reddit or discord if interested (reddit: /u/nzhoward, discord: nzhoward) Thanks!

Offline kconfire

  • Posts: 292
  • Location: NJ, USA
Re: [GB] LZ CLS s x h (Classic 60) : [Production now]
« Reply #231 on: Fri, 23 March 2018, 18:18:52 »
I have Red HHKB spot I'd be willing to switch out, too if anyone's interested! :)
PM kconfire on Reddit/GH.

Offline mago

  • Posts: 32
  • Location: New York
Re: [GB] LZ CLS s x h (Classic 60) : [Production now]
« Reply #232 on: Tue, 17 April 2018, 03:55:52 »
If anyone wants to sell a Silver HHKB version with STS plate slot, please message me whenever  :thumb:
TX60 | E6-V2 | Ares | M60-A | QXP

Offline Helldrop

  • Posts: 80
  • Location: South Hell
Re: [GB] LZ CLS s x h (Classic 60) : [Production now]
« Reply #233 on: Tue, 17 April 2018, 10:22:20 »
I'm looking for CLSs, Standard 60%, except for Silver one!
If anyone wants to cancel the order, please PM me whenever.


Edit: I succeeded to get the board!  :thumb:
« Last Edit: Wed, 18 April 2018, 05:40:59 by Helldrop »

Offline LifeZ

  • Thread Starter
  • Posts: 540
  • LifeZone
Re: [GB] LZ CLS s x h (Classic 60) : [Production now]
« Reply #234 on: Mon, 23 April 2018, 00:45:02 »
UPDATE. april.23
CNC 85%
SWITCH PLATE 70%
PCB(L3 Finger) 100%
BAG 70%
194441-0

Online Vadurr

  • Posts: 405
  • Location: CA
  • Valar Morghulis
Re: [GB] LZ CLS s x h (Classic 60) : [Production now]
« Reply #235 on: Mon, 23 April 2018, 01:10:04 »
UPDATE. april.23
CNC 85%
SWITCH PLATE 70%
PCB(L3 Finger) 100%
BAG 70%
(Attachment Link)


ooohyahhh :p

Online CommonCurt

  • * Esteemed Elder
  • Posts: 4334
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: [GB] LZ CLS s x h (Classic 60) : [Production now]
« Reply #236 on: Mon, 23 April 2018, 01:37:49 »
UPDATE. april.23
CNC 85%
SWITCH PLATE 70%
PCB(L3 Finger) 100%
BAG 70%
(Attachment Link)

Thanks for the update LZ  :)
Some of my Keyboards -->
More
OTD Koala:  lubed 62g Old MX-Blacks    |    KMAC2:  lubed 62g Tactile MX-Greys    |    X60:  lubed 62g Vintage MX-Blacks    |    GON NerD 60:  lubed 62g Old MX-Clears    |    Filco MJ2 (Beige) TKL's:  lubed 62g MX-Clears  &  lubed  62g Vintage MX-Blacks    |    IBM '91 SSK
                                
       
WTB/WTS ---->
More

Offline LifeZ

  • Thread Starter
  • Posts: 540
  • LifeZone
Re: [GB] LZ CLS s x h (Classic 60) : [Production now]
« Reply #237 on: Tue, 24 April 2018, 19:01:07 »
MX Switch plate
carbon, pc, alu
194534-0

Online profanum429

  • Posts: 47
  • Location: Florida, USA
Re: [GB] LZ CLS s x h (Classic 60) : [Production now]
« Reply #238 on: Tue, 24 April 2018, 19:02:57 »
Hnnnnng, looking forward to this!

Online CommonCurt

  • * Esteemed Elder
  • Posts: 4334
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: [GB] LZ CLS s x h (Classic 60) : [Production now]
« Reply #239 on: Tue, 24 April 2018, 20:46:01 »
MX Switch plate
carbon, pc, alu
(Attachment Link)

Nice.

Can someone post the actual link to the order check?  The I'm still getting redirected to Rainbow Magic Land when I click on links.
Some of my Keyboards -->
More
OTD Koala:  lubed 62g Old MX-Blacks    |    KMAC2:  lubed 62g Tactile MX-Greys    |    X60:  lubed 62g Vintage MX-Blacks    |    GON NerD 60:  lubed 62g Old MX-Clears    |    Filco MJ2 (Beige) TKL's:  lubed 62g MX-Clears  &  lubed  62g Vintage MX-Blacks    |    IBM '91 SSK
                                
       
WTB/WTS ---->
More

Online amnesia0287

  • Formerly Amnesia
  • Posts: 998
Re: [GB] LZ CLS s x h (Classic 60) : [Production now]
« Reply #240 on: Tue, 24 April 2018, 21:22:38 »
MX Switch plate
carbon, pc, alu
(Attachment Link)

Nice.

Can someone post the actual link to the order check?  The I'm still getting redirected to Rainbow Magic Land when I click on links.

The link is correct, that seems to be a geek hack problem. Just copy paste the link.

Online CommonCurt

  • * Esteemed Elder
  • Posts: 4334
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: [GB] LZ CLS s x h (Classic 60) : [Production now]
« Reply #241 on: Tue, 24 April 2018, 22:47:33 »
MX Switch plate
carbon, pc, alu
(Attachment Link)

Nice.

Can someone post the actual link to the order check?  The I'm still getting redirected to Rainbow Magic Land when I click on links.

The link is correct, that seems to be a geek hack problem. Just copy paste the link.

No, the Order Check link in the OP is definitely not working for me (even when copying to a new tab).

The one on page 4 does work though  :thumb:
Some of my Keyboards -->
More
OTD Koala:  lubed 62g Old MX-Blacks    |    KMAC2:  lubed 62g Tactile MX-Greys    |    X60:  lubed 62g Vintage MX-Blacks    |    GON NerD 60:  lubed 62g Old MX-Clears    |    Filco MJ2 (Beige) TKL's:  lubed 62g MX-Clears  &  lubed  62g Vintage MX-Blacks    |    IBM '91 SSK
                                
       
WTB/WTS ---->
More

Online Spaghetti

  • Posts: 11
Re: [GB] LZ CLS s x h (Classic 60) : [Production now]
« Reply #242 on: Thu, 26 April 2018, 15:02:08 »
MX Switch plate
carbon, pc, alu
(Attachment Link)

Nice.

Can someone post the actual link to the order check?  The I'm still getting redirected to Rainbow Magic Land when I click on links.

The link is correct, that seems to be a geek hack problem. Just copy paste the link.

No, the Order Check link in the OP is definitely not working for me (even when copying to a new tab).

The one on page 4 does work though  :thumb:

Thanks, I thought the order check was just closed for some reason
Realforce 104U | Pearl | Planck | Leopold 660M | Dell AT101