Author Topic: GON's KeyboardWorks - Questions and Answers  (Read 394606 times)

0 Members and 1 Guest are viewing this topic.

Offline minho

  • Posts: 490
  • Location: United States
  • i'm kind of back
Re: Questions and Answers
« Reply #150 on: Thu, 12 June 2014, 14:31:05 »
Cross posted from another thread about the NerD because I'm not sure if GON was following that one.

If buying a acrylic case and nerd pcb, do you need to purchase the SMD and LEDs and other components separately? (I see them for sale on the website as separate parts, but not sure if included in PCB order or not).

Offline pmh1410

  • Posts: 479
  • Location: Ha Noi, Viet Nam
Re: Questions and Answers
« Reply #151 on: Sat, 14 June 2014, 01:47:05 »
Hi Gon, pls check your email ;)
Vietnam Mechanical Keyboard Club

Keyboards Collection: Powered by OTD
TKL: 360C Hyper Silver, Cheat B/R/B
Mini: 356mini Red, Duck Poker + 38GT.

Offline GON

  • * Maker
  • Posts: 211
  • Location: S. Korea
  • Skype ID : GonsKeyboardWorks
    • GONsKeyboardWorks
Re: Questions and Answers
« Reply #152 on: Tue, 17 June 2014, 06:44:30 »
Hi Gon, pls check your email ;)

Sorry, I will check it. ;)
Even though I have made/assembled/tuned HUNDREDs of keyboards for others, I myself don't have a full-tuned Custom Keyboard now.
So Ironical!

Offline redskull

  • Posts: 381
Re: Questions and Answers
« Reply #153 on: Wed, 18 June 2014, 01:01:30 »
Hi Gon, pls check your email ;)

Sorry, I will check it. ;)
hi GON, whats the update on my small order?

Offline GON

  • * Maker
  • Posts: 211
  • Location: S. Korea
  • Skype ID : GonsKeyboardWorks
    • GONsKeyboardWorks
Re: Questions and Answers
« Reply #154 on: Sat, 21 June 2014, 06:29:04 »
Hi Gon, pls check your email ;)

Sorry, I will check it. ;)
hi GON, whats the update on my small order?

Will be shipped next week. ;)
(They are already packed and waiting for pick up. ;))
Even though I have made/assembled/tuned HUNDREDs of keyboards for others, I myself don't have a full-tuned Custom Keyboard now.
So Ironical!

Offline redskull

  • Posts: 381
Re: Questions and Answers
« Reply #155 on: Sat, 21 June 2014, 07:21:21 »
Hi Gon, pls check your email ;)

Sorry, I will check it. ;)
hi GON, whats the update on my small order?

Will be shipped next week. ;)
(They are already packed and waiting for pick up. ;))
w00t! w00t! cant wait!  ;D ;D ;D

Offline redskull

  • Posts: 381
Re: Questions and Answers
« Reply #156 on: Tue, 24 June 2014, 04:14:17 »
Hi Gon, pls check your email ;)

Sorry, I will check it. ;)
hi GON, whats the update on my small order?

Will be shipped next week. ;)
(They are already packed and waiting for pick up. ;))
hi GON,

after you ship my items, should i receive any notification in my e-mail? maybe from paypal?

Offline GON

  • * Maker
  • Posts: 211
  • Location: S. Korea
  • Skype ID : GonsKeyboardWorks
    • GONsKeyboardWorks
Re: Questions and Answers
« Reply #157 on: Thu, 26 June 2014, 06:19:51 »
Hi Gon, pls check your email ;)

Sorry, I will check it. ;)
hi GON, whats the update on my small order?

Will be shipped next week. ;)
(They are already packed and waiting for pick up. ;))
hi GON,

after you ship my items, should i receive any notification in my e-mail? maybe from paypal?

Either from paypal or at www.GONsKeyboardworks.com orderstatus. ;)
Even though I have made/assembled/tuned HUNDREDs of keyboards for others, I myself don't have a full-tuned Custom Keyboard now.
So Ironical!

Offline ApocalypseMaow

  • Kitteh Overlord
  • Posts: 1877
  • Location: Arkansas
  • Say WHAAT...
Re: Questions and Answers
« Reply #158 on: Thu, 26 June 2014, 06:28:24 »
Hello, GON!

What are the chances of getting a LEEKU 1800 pcb from your shop?
{WTT}HoffNudes(WTS)BLK LightSaverV2         
"#baby****fangerz" -Vesper 2015

Offline GON

  • * Maker
  • Posts: 211
  • Location: S. Korea
  • Skype ID : GonsKeyboardWorks
    • GONsKeyboardWorks
Re: Questions and Answers
« Reply #159 on: Thu, 26 June 2014, 06:37:11 »
Hello, GON!

What are the chances of getting a LEEKU 1800 pcb from your shop?

Sorry I don't have them in stock. ;)
Even though I have made/assembled/tuned HUNDREDs of keyboards for others, I myself don't have a full-tuned Custom Keyboard now.
So Ironical!

Offline ApocalypseMaow

  • Kitteh Overlord
  • Posts: 1877
  • Location: Arkansas
  • Say WHAAT...
Re: Questions and Answers
« Reply #160 on: Thu, 26 June 2014, 07:28:52 »
Hello, GON!

What are the chances of getting a LEEKU 1800 pcb from your shop?

Sorry I don't have them in stock. ;)
Is it something you could get in the future?
{WTT}HoffNudes(WTS)BLK LightSaverV2         
"#baby****fangerz" -Vesper 2015

Offline GON

  • * Maker
  • Posts: 211
  • Location: S. Korea
  • Skype ID : GonsKeyboardWorks
    • GONsKeyboardWorks
Re: Questions and Answers
« Reply #161 on: Thu, 26 June 2014, 07:41:44 »
Hello, GON!

What are the chances of getting a LEEKU 1800 pcb from your shop?

Sorry I don't have them in stock. ;)
Is it something you could get in the future?

Maybe not, sorry...
Even though I have made/assembled/tuned HUNDREDs of keyboards for others, I myself don't have a full-tuned Custom Keyboard now.
So Ironical!

Offline ApocalypseMaow

  • Kitteh Overlord
  • Posts: 1877
  • Location: Arkansas
  • Say WHAAT...
Re: Questions and Answers
« Reply #162 on: Thu, 26 June 2014, 09:41:10 »
Hello, GON!

What are the chances of getting a LEEKU 1800 pcb from your shop?

Sorry I don't have them in stock. ;)
Is it something you could get in the future?

Maybe not, sorry...
no worries GON! just thought I'd check.
{WTT}HoffNudes(WTS)BLK LightSaverV2         
"#baby****fangerz" -Vesper 2015

Offline GeorgeK

  • Posts: 758
  • Location: Ashford, Kent, United Kingdom
Re: Questions and Answers
« Reply #163 on: Fri, 27 June 2014, 09:22:22 »
Black Filco TKL - Stickered, Lubed Reds || Poker w/Plate, Alu Case -  Stickered, Lubed 65g Ergo-Clears || Cherry G80-3700 w/SS Plate - Lubed 65g Ergo-Clears

Offline GON

  • * Maker
  • Posts: 211
  • Location: S. Korea
  • Skype ID : GonsKeyboardWorks
    • GONsKeyboardWorks
Re: Questions and Answers
« Reply #164 on: Fri, 27 June 2014, 12:17:14 »
Even though I have made/assembled/tuned HUNDREDs of keyboards for others, I myself don't have a full-tuned Custom Keyboard now.
So Ironical!

Offline GeorgeK

  • Posts: 758
  • Location: Ashford, Kent, United Kingdom
Re: Questions and Answers
« Reply #165 on: Fri, 27 June 2014, 12:27:57 »
Damn...
Black Filco TKL - Stickered, Lubed Reds || Poker w/Plate, Alu Case -  Stickered, Lubed 65g Ergo-Clears || Cherry G80-3700 w/SS Plate - Lubed 65g Ergo-Clears

Offline GeorgeK

  • Posts: 758
  • Location: Ashford, Kent, United Kingdom
Re: Questions and Answers
« Reply #166 on: Wed, 09 July 2014, 10:47:22 »
Couple more quick questions:

1) Have you stopped doing the GON NS 87 case with semi-glare?

2) Are you going to be discontinuing them at any point?
Black Filco TKL - Stickered, Lubed Reds || Poker w/Plate, Alu Case -  Stickered, Lubed 65g Ergo-Clears || Cherry G80-3700 w/SS Plate - Lubed 65g Ergo-Clears

Offline GON

  • * Maker
  • Posts: 211
  • Location: S. Korea
  • Skype ID : GonsKeyboardWorks
    • GONsKeyboardWorks
Re: Questions and Answers
« Reply #167 on: Wed, 09 July 2014, 11:38:55 »
Couple more quick questions:

1) Have you stopped doing the GON NS 87 case with semi-glare?

2) Are you going to be discontinuing them at any point?


1) Semi-Glare is not available anymore...
2) Yes, it will be soon discontinued.
Even though I have made/assembled/tuned HUNDREDs of keyboards for others, I myself don't have a full-tuned Custom Keyboard now.
So Ironical!

Offline GeorgeK

  • Posts: 758
  • Location: Ashford, Kent, United Kingdom
Re: Questions and Answers
« Reply #168 on: Wed, 09 July 2014, 16:10:13 »
OK - how long do I have to order one?
Black Filco TKL - Stickered, Lubed Reds || Poker w/Plate, Alu Case -  Stickered, Lubed 65g Ergo-Clears || Cherry G80-3700 w/SS Plate - Lubed 65g Ergo-Clears

Offline GON

  • * Maker
  • Posts: 211
  • Location: S. Korea
  • Skype ID : GonsKeyboardWorks
    • GONsKeyboardWorks
Re: Questions and Answers
« Reply #169 on: Thu, 10 July 2014, 05:42:26 »
OK - how long do I have to order one?

I think I have one Mid-part left. And I don't know whether I will make  more or not...
AL plates are not difficult to machine, but its mid parts are not... so I usually have mid-parts in stock as many as I need.
Now, I have one left.
Even though I have made/assembled/tuned HUNDREDs of keyboards for others, I myself don't have a full-tuned Custom Keyboard now.
So Ironical!

Offline GeorgeK

  • Posts: 758
  • Location: Ashford, Kent, United Kingdom
Re: Questions and Answers
« Reply #170 on: Thu, 10 July 2014, 07:35:32 »
Could you put it aside for me?  I just need to test something and then I'll order (by Sunday at the latest)

Thanks

GK
Black Filco TKL - Stickered, Lubed Reds || Poker w/Plate, Alu Case -  Stickered, Lubed 65g Ergo-Clears || Cherry G80-3700 w/SS Plate - Lubed 65g Ergo-Clears

Offline GON

  • * Maker
  • Posts: 211
  • Location: S. Korea
  • Skype ID : GonsKeyboardWorks
    • GONsKeyboardWorks
Re: Questions and Answers
« Reply #171 on: Fri, 11 July 2014, 13:16:27 »
Could you put it aside for me?  I just need to test something and then I'll order (by Sunday at the latest)

Thanks

GK


OK, No problem. ;)
Even though I have made/assembled/tuned HUNDREDs of keyboards for others, I myself don't have a full-tuned Custom Keyboard now.
So Ironical!

Offline GeorgeK

  • Posts: 758
  • Location: Ashford, Kent, United Kingdom
Re: Questions and Answers
« Reply #172 on: Fri, 11 July 2014, 16:52:47 »
Cheers mate - will definitely get back to you in the next day or two :)

GK
Black Filco TKL - Stickered, Lubed Reds || Poker w/Plate, Alu Case -  Stickered, Lubed 65g Ergo-Clears || Cherry G80-3700 w/SS Plate - Lubed 65g Ergo-Clears

Offline GeorgeK

  • Posts: 758
  • Location: Ashford, Kent, United Kingdom
Re: Questions and Answers
« Reply #173 on: Thu, 17 July 2014, 02:18:02 »
Hmm - looks like there are some issues with my A.87 pcb that I can't iron out myself in a hurry...

Seeing as a NerD TKL PCB and one of the acrylic cases is actually less money than one of the A.87 compatible cases - a couple of questions about the NerD TKL if I may:

1) Is there a reason that orange LEDs aren't available?  I have some of these which have a forward voltage of 1.8 - 2.2v so I'm guessing the 680 ohm resistors would be best if the board supports them.

2) I see on the product page for the PCB that the keymap editor isn't available yet.  As standard, does it support this layout:



3) If it does support that layout, which key/s are the fn keys and what is the fn layer?

That's it for now!

Thanks again GON - most appreciated :)

GK

Black Filco TKL - Stickered, Lubed Reds || Poker w/Plate, Alu Case -  Stickered, Lubed 65g Ergo-Clears || Cherry G80-3700 w/SS Plate - Lubed 65g Ergo-Clears

Offline GON

  • * Maker
  • Posts: 211
  • Location: S. Korea
  • Skype ID : GonsKeyboardWorks
    • GONsKeyboardWorks
Re: Questions and Answers
« Reply #174 on: Thu, 17 July 2014, 07:31:44 »
Hmm - looks like there are some issues with my A.87 pcb that I can't iron out myself in a hurry...

Seeing as a NerD TKL PCB and one of the acrylic cases is actually less money than one of the A.87 compatible cases - a couple of questions about the NerD TKL if I may:

1) Is there a reason that orange LEDs aren't available?  I have some of these which have a forward voltage of 1.8 - 2.2v so I'm guessing the 680 ohm resistors would be best if the board supports them.

2) I see on the product page for the PCB that the keymap editor isn't available yet.  As standard, does it support this layout:

Show Image


3) If it does support that layout, which key/s are the fn keys and what is the fn layer?

That's it for now!

Thanks again GON - most appreciated :)

GK




1) There is little demand for Orange LEDs because they are too similar with REDs. So I don't stock them. But you can apply them to the PCB if you want.

2)3) Refer to the following links. Keymap editor is not a problem anymore, it will be released at around the end of this month.
http://geekhack.org/index.php?topic=50577.0
http://www.gonskeyboardworks.com/housingscases/82-acrylic-housing-for-nerd-tkl.html
Even though I have made/assembled/tuned HUNDREDs of keyboards for others, I myself don't have a full-tuned Custom Keyboard now.
So Ironical!

Offline GeorgeK

  • Posts: 758
  • Location: Ashford, Kent, United Kingdom
Re: Questions and Answers
« Reply #175 on: Thu, 17 July 2014, 07:34:55 »
Thanks for getting back to me.  So with a Winkey layout (1.5 - 1 - 1.5 - 7 - 1.5 - 1 - 1.5) does the right-hand 'windows' key (the 1x key) act as the fn key?  Does the board come pre-programmed with this layout or another layout (a 6.25 spacebar for example)

Thanks again

GK

Black Filco TKL - Stickered, Lubed Reds || Poker w/Plate, Alu Case -  Stickered, Lubed 65g Ergo-Clears || Cherry G80-3700 w/SS Plate - Lubed 65g Ergo-Clears

Offline GON

  • * Maker
  • Posts: 211
  • Location: S. Korea
  • Skype ID : GonsKeyboardWorks
    • GONsKeyboardWorks
Re: Questions and Answers
« Reply #176 on: Sat, 19 July 2014, 01:16:12 »
Thanks for getting back to me.  So with a Winkey layout (1.5 - 1 - 1.5 - 7 - 1.5 - 1 - 1.5) does the right-hand 'windows' key (the 1x key) act as the fn key?  Does the board come pre-programmed with this layout or another layout (a 6.25 spacebar for example)

Thanks again

GK




Keymap is no more problem, GUI is almost developed and will be released at the end of this month.
Even though I have made/assembled/tuned HUNDREDs of keyboards for others, I myself don't have a full-tuned Custom Keyboard now.
So Ironical!

Offline GeorgeK

  • Posts: 758
  • Location: Ashford, Kent, United Kingdom
Re: Questions and Answers
« Reply #177 on: Sat, 19 July 2014, 03:36:01 »
Great - thanks again.

Last question - I'm trying to decide on what colours to go for in terms of the case.  Do you have any pictures of the "Orange (Transparent)" acrylic that is available for either the plate or the mid section? (http://www.gonskeyboardworks.com/housingscases/82-acrylic-housing-for-nerd-tkl.html)

Cheers

GK
Black Filco TKL - Stickered, Lubed Reds || Poker w/Plate, Alu Case -  Stickered, Lubed 65g Ergo-Clears || Cherry G80-3700 w/SS Plate - Lubed 65g Ergo-Clears

Offline GON

  • * Maker
  • Posts: 211
  • Location: S. Korea
  • Skype ID : GonsKeyboardWorks
    • GONsKeyboardWorks
Re: Questions and Answers
« Reply #178 on: Sat, 19 July 2014, 08:26:02 »
Great - thanks again.

Last question - I'm trying to decide on what colours to go for in terms of the case.  Do you have any pictures of the "Orange (Transparent)" acrylic that is available for either the plate or the mid section? (http://www.gonskeyboardworks.com/housingscases/82-acrylic-housing-for-nerd-tkl.html)

Cheers

GK


Unfortunately, no... I don't have pictures for Acrylics.
Even though I have made/assembled/tuned HUNDREDs of keyboards for others, I myself don't have a full-tuned Custom Keyboard now.
So Ironical!

Offline GeorgeK

  • Posts: 758
  • Location: Ashford, Kent, United Kingdom
Re: Questions and Answers
« Reply #179 on: Sat, 19 July 2014, 13:11:47 »
OK thanks.  Fairly certain I'm going to go for black top and bottom.  Just need to decide on either orange plate and mid or transparent orange top and mid.

Would the orange that isn't transparent let any light through?  If not then I might have made my decision :)
Black Filco TKL - Stickered, Lubed Reds || Poker w/Plate, Alu Case -  Stickered, Lubed 65g Ergo-Clears || Cherry G80-3700 w/SS Plate - Lubed 65g Ergo-Clears

Offline GON

  • * Maker
  • Posts: 211
  • Location: S. Korea
  • Skype ID : GonsKeyboardWorks
    • GONsKeyboardWorks
Re: Questions and Answers
« Reply #180 on: Sun, 20 July 2014, 01:48:20 »
OK thanks.  Fairly certain I'm going to go for black top and bottom.  Just need to decide on either orange plate and mid or transparent orange top and mid.

Would the orange that isn't transparent let any light through?  If not then I might have made my decision :)

I don't recommend non-transparent parts for mid if you like beautiful Side LEDs. ;)
Even though I have made/assembled/tuned HUNDREDs of keyboards for others, I myself don't have a full-tuned Custom Keyboard now.
So Ironical!

Offline GeorgeK

  • Posts: 758
  • Location: Ashford, Kent, United Kingdom
Re: Questions and Answers
« Reply #181 on: Sun, 20 July 2014, 03:47:19 »
Fair enough :)

How does a black top and bottom and transparent orange mid and plate sound to you? (With orange switch and side LEDs)
Black Filco TKL - Stickered, Lubed Reds || Poker w/Plate, Alu Case -  Stickered, Lubed 65g Ergo-Clears || Cherry G80-3700 w/SS Plate - Lubed 65g Ergo-Clears

Offline GeorgeK

  • Posts: 758
  • Location: Ashford, Kent, United Kingdom
Re: Questions and Answers
« Reply #182 on: Fri, 25 July 2014, 07:25:31 »
Hi GON

One last question (I hope)

On the NerD PCB page at the bottom of the page it gives the option for side LED colour.  Does this mean that they are included in the price of the PCB or would they need ordering separately?  (i.e If I selected Orange would I actually receive 33 orange SMD LEDs or not?)

Thanks

George
Black Filco TKL - Stickered, Lubed Reds || Poker w/Plate, Alu Case -  Stickered, Lubed 65g Ergo-Clears || Cherry G80-3700 w/SS Plate - Lubed 65g Ergo-Clears

Offline GON

  • * Maker
  • Posts: 211
  • Location: S. Korea
  • Skype ID : GonsKeyboardWorks
    • GONsKeyboardWorks
Re: Questions and Answers
« Reply #183 on: Fri, 25 July 2014, 07:40:59 »
Hi GON

One last question (I hope)

On the NerD PCB page at the bottom of the page it gives the option for side LED colour.  Does this mean that they are included in the price of the PCB or would they need ordering separately?  (i.e If I selected Orange would I actually receive 33 orange SMD LEDs or not?)

Thanks

George

If you want to solder SMD LEDs yourself, you can order them at Accessories Category.
If you want me to solder SMD LEDs, you have to choose "Optional Soldering = Side LEDs and resistors for them" which charges you extra fee.
Even though I have made/assembled/tuned HUNDREDs of keyboards for others, I myself don't have a full-tuned Custom Keyboard now.
So Ironical!

Offline GeorgeK

  • Posts: 758
  • Location: Ashford, Kent, United Kingdom
Re: Questions and Answers
« Reply #184 on: Fri, 25 July 2014, 07:42:05 »
I'll be doing them (well margo will but same thing)

What is the drop-down on the page for?
Black Filco TKL - Stickered, Lubed Reds || Poker w/Plate, Alu Case -  Stickered, Lubed 65g Ergo-Clears || Cherry G80-3700 w/SS Plate - Lubed 65g Ergo-Clears

Offline domoaligato

  • * Exquisite Elder
  • Posts: 1672
  • Location: USA
  • All your base are belong to us!
    • All your base are belong to us!
Re: Questions and Answers
« Reply #185 on: Thu, 31 July 2014, 20:05:56 »
has information about the Gon NerD Ergo been released? I saw this in the NerD Gui youtube videos and was very interested.

Offline GON

  • * Maker
  • Posts: 211
  • Location: S. Korea
  • Skype ID : GonsKeyboardWorks
    • GONsKeyboardWorks
Re: Questions and Answers
« Reply #186 on: Thu, 31 July 2014, 20:30:11 »
has information about the Gon NerD Ergo been released? I saw this in the NerD Gui youtube videos and was very interested.

Someday... but not developed yet. ;)
Even though I have made/assembled/tuned HUNDREDs of keyboards for others, I myself don't have a full-tuned Custom Keyboard now.
So Ironical!

Offline Lastpilot

  • Power stance
  • * Esteemed Elder
  • Posts: 1463
  • Location: Louisiana
Re: Questions and Answers
« Reply #187 on: Fri, 08 August 2014, 14:02:34 »
What resistors are recommended to use for white LED's on the PS2AVR mx-miniU? In-switch square 2x3x4 white led's will be used.

I want them to be extra bright!
« Last Edit: Fri, 08 August 2014, 14:16:39 by Lastpilot »

Offline GON

  • * Maker
  • Posts: 211
  • Location: S. Korea
  • Skype ID : GonsKeyboardWorks
    • GONsKeyboardWorks
Re: Questions and Answers
« Reply #188 on: Sat, 09 August 2014, 03:41:09 »
What resistors are recommended to use for white LED's on the PS2AVR mx-miniU? In-switch square 2x3x4 white led's will be used.

I want them to be extra bright!


If you don't connect it to PS/2 but only to USB, 470R will do.
Even though I have made/assembled/tuned HUNDREDs of keyboards for others, I myself don't have a full-tuned Custom Keyboard now.
So Ironical!

Offline margo baggins

  • Dungeon Dweller
  • * Maker
  • Posts: 305
  • Location: Brighton - United Kingdom
  • Get back to work!
Re: Questions and Answers
« Reply #189 on: Mon, 11 August 2014, 07:17:32 »
Hello GON,

Can you make your 60% acrylic case support ISO? or is that not possible?

thanks :)

Margo

PS. The nerdy gui is amazing.
« Last Edit: Mon, 11 August 2014, 07:20:12 by margo baggins »
I got boards.



Offline GON

  • * Maker
  • Posts: 211
  • Location: S. Korea
  • Skype ID : GonsKeyboardWorks
    • GONsKeyboardWorks
Re: Questions and Answers
« Reply #190 on: Mon, 11 August 2014, 08:08:35 »
Hello GON,

Can you make your 60% acrylic case support ISO? or is that not possible?

thanks :)

Margo

PS. The nerdy gui is amazing.

Hi margo,

Well... I can if I feel I need to.
It's just a matter of priority.... I don't have enough time to do everything... ;)
So... I do first what many people want or would want.

Just to make one, I have to sample it.
Acrylics are not suitable to make multi-layout supporting plate...
How many want ISO only layout? ;)


P.S. I considered all about NerD - Physical PCB design, Functions, Firmware and GUI - at the very beginning of its development. ;)
Even though I have made/assembled/tuned HUNDREDs of keyboards for others, I myself don't have a full-tuned Custom Keyboard now.
So Ironical!

Offline margo baggins

  • Dungeon Dweller
  • * Maker
  • Posts: 305
  • Location: Brighton - United Kingdom
  • Get back to work!
Re: Questions and Answers
« Reply #191 on: Tue, 12 August 2014, 04:28:15 »
I don't think very many :)

Plus I realised the GON [CTRL]ALT 60 supports ISO, so I will just use that. I just wanted to build a little ISO board :)
I got boards.



Offline GON

  • * Maker
  • Posts: 211
  • Location: S. Korea
  • Skype ID : GonsKeyboardWorks
    • GONsKeyboardWorks
Re: Questions and Answers
« Reply #192 on: Tue, 12 August 2014, 05:03:48 »
I don't think very many :)

Plus I realised the GON [CTRL]ALT 60 supports ISO, so I will just use that. I just wanted to build a little ISO board :)

Yes, that KBD supports almost all kinds of layouts. ;)
Even though I have made/assembled/tuned HUNDREDs of keyboards for others, I myself don't have a full-tuned Custom Keyboard now.
So Ironical!

Offline cseng

  • Posts: 56
Re: Questions and Answers
« Reply #193 on: Tue, 19 August 2014, 06:10:26 »
Hi Gon, pls check your email ;)

Sorry, I will check it. ;)
hi GON, whats the update on my small order?

Will be shipped next week. ;)
(They are already packed and waiting for pick up. ;))
hi GON,

after you ship my items, should i receive any notification in my e-mail? maybe from paypal?

Either from paypal or at www.GONsKeyboardworks.com orderstatus. ;)

Wait... so that means my order hasn't been shipped yet?! My payment was accepted 15th May and it's 19 August today....
Btw I sent you a mail asking the same question...
« Last Edit: Tue, 19 August 2014, 08:46:32 by cseng »

Offline GON

  • * Maker
  • Posts: 211
  • Location: S. Korea
  • Skype ID : GonsKeyboardWorks
    • GONsKeyboardWorks
Re: Questions and Answers
« Reply #194 on: Tue, 19 August 2014, 14:12:59 »
Hi Gon, pls check your email ;)

Sorry, I will check it. ;)
hi GON, whats the update on my small order?

Will be shipped next week. ;)
(They are already packed and waiting for pick up. ;))
hi GON,

after you ship my items, should i receive any notification in my e-mail? maybe from paypal?

Either from paypal or at www.GONsKeyboardworks.com orderstatus. ;)

Wait... so that means my order hasn't been shipped yet?! My payment was accepted 15th May and it's 19 August today....
Btw I sent you a mail asking the same question...


Sorry for delay...
NerDy GUI took more time than I expected this spring....
But I shipped your NerD today, and you can check your tracking number at your order status.
You will need a couple of days till you can track with that number.

Thanks for your patience, ;)
GON
Even though I have made/assembled/tuned HUNDREDs of keyboards for others, I myself don't have a full-tuned Custom Keyboard now.
So Ironical!

Offline cseng

  • Posts: 56
Re: Questions and Answers
« Reply #195 on: Tue, 19 August 2014, 14:24:11 »
Ye but latest version 1.2 was released like 3rd August...
Oh well 1-2 more weeks then.
« Last Edit: Tue, 19 August 2014, 14:41:17 by cseng »

Offline archer

  • Posts: 215
Re: Questions and Answers
« Reply #196 on: Tue, 19 August 2014, 15:38:00 »
Ye but latest version 1.2 was released like 3rd August...
Oh well 1-2 more weeks then.
Not sure where you're located.. but when I got my tracking number from Gon, the kbd was at my house on my doorstep in 3 or 4 days. You might not have to wait as long as you think!

Offline cseng

  • Posts: 56
Re: Questions and Answers
« Reply #197 on: Tue, 19 August 2014, 17:34:04 »
Ye but latest version 1.2 was released like 3rd August...
Oh well 1-2 more weeks then.
Not sure where you're located.. but when I got my tracking number from Gon, the kbd was at my house on my doorstep in 3 or 4 days. You might not have to wait as long as you think!

I'm in Sweden and I hope that applies to me as well lol.

Offline GON

  • * Maker
  • Posts: 211
  • Location: S. Korea
  • Skype ID : GonsKeyboardWorks
    • GONsKeyboardWorks
Re: Questions and Answers
« Reply #198 on: Tue, 19 August 2014, 19:35:39 »
Ye but latest version 1.2 was released like 3rd August...
Oh well 1-2 more weeks then.

Sorry... I had to spend almost a whole month in developing... Which means, I could not assemble for the time being....
Even though I have made/assembled/tuned HUNDREDs of keyboards for others, I myself don't have a full-tuned Custom Keyboard now.
So Ironical!

Offline uns211

  • Posts: 52
  • Location: California
Re: Questions and Answers
« Reply #199 on: Fri, 22 August 2014, 15:53:59 »
Are these resistors suitible for the GON NerD 60/ [CTRL]ALT 60?