Author Topic: [IC] FUSION60 (Final Design & Estimate Price)  (Read 27406 times)

Cloudnine25 and 1 Guest are viewing this topic.

Online Kerasan

  • Posts: 153
  • Location: Italy
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #150 on: Mon, 28 May 2018, 14:26:08 »
This is how the prototype looks like.. we cant make the sides looks as sharp like the 3d render.. what do you guys think? Should I keep it like that or remove the side design?
Show Image
Show Image
Show Image


Sent from my SM-G610F using Tapatalk




this detail seems to be the weak point of design, it could improve imho. however, the look is really nice.

KMK Labs

« Last Edit: Mon, 28 May 2018, 14:28:44 by Kerasan »

Offline Vulcan

  • Thread Starter
  • Posts: 117
  • Location: Indonesia
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #151 on: Tue, 29 May 2018, 05:46:33 »
Here is another photograph from different angel

Sent from my SM-G610F using Tapatalk


Offline Vulcan

  • Thread Starter
  • Posts: 117
  • Location: Indonesia
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #152 on: Tue, 29 May 2018, 06:26:07 »


This is how the prototype looks like.. we cant make the sides looks as sharp like the 3d render.. what do you guys think? Should I keep it like that or remove the side design?
Show Image
Show Image
Show Image


Sent from my SM-G610F using Tapatalk

Show Image



this detail seems to be the weak point of design, it could improve imho. however, the look is really nice.

KMK Labs

Yea.. i agree..Do you have a suggestion to fix that?

Sent from my SM-G610F using Tapatalk


Offline cldskt

  • Posts: 105
  • Location: Rabbithole
  • Wallet and hobby aren't friends
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #153 on: Tue, 29 May 2018, 07:56:50 »
This is how the prototype looks like.. we cant make the sides looks as sharp like the 3d render.. what do you guys think? Should I keep it like that or remove the side design?
Show Image
Show Image
Show Image


Sent from my SM-G610F using Tapatalk

Is it just me or the top plate doesn't seem to be flush with the bottom plate? Or is this a known problem that is only in the prototype?


"Addiction is buying the things that I don't need with the money I don't have." - me
"Spending $500 on your first custom is justified." - also me

Offline Vulcan

  • Thread Starter
  • Posts: 117
  • Location: Indonesia
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #154 on: Tue, 29 May 2018, 08:23:00 »
This is how the prototype looks like.. we cant make the sides looks as sharp like the 3d render.. what do you guys think? Should I keep it like that or remove the side design?
Show Image
Show Image
Show Image


Sent from my SM-G610F using Tapatalk

Is it just me or the top plate doesn't seem to be flush with the bottom plate? Or is this a known problem that is only in the prototype?
It's not screwed in properly yet.. we haven't receive the screws yet

Sent from my SM-G610F using Tapatalk


Offline fine_italian_leather

  • Posts: 110
  • Location: Sweden
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #155 on: Tue, 29 May 2018, 08:51:51 »
Any chance we could see a silver (anodized) or maybe even a white (powder coat/cerakote) version?

Offline cldskt

  • Posts: 105
  • Location: Rabbithole
  • Wallet and hobby aren't friends
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #156 on: Tue, 29 May 2018, 10:40:29 »
This is how the prototype looks like.. we cant make the sides looks as sharp like the 3d render.. what do you guys think? Should I keep it like that or remove the side design?
Show Image
Show Image
Show Image


Sent from my SM-G610F using Tapatalk

Is it just me or the top plate doesn't seem to be flush with the bottom plate? Or is this a known problem that is only in the prototype?
It's not screwed in properly yet.. we haven't receive the screws yet

Sent from my SM-G610F using Tapatalk

Ah cool. That is totally fine then.

Additionally, maybe for the side design, the top-part of the case can have a curve above the side design part, so that it looks seamless and not like a ‘roof’. I’m not sure if I’m describing this clearly.


Sent from my iPhone using Tapatalk


"Addiction is buying the things that I don't need with the money I don't have." - me
"Spending $500 on your first custom is justified." - also me

Offline bball2

  • Posts: 98
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #157 on: Tue, 29 May 2018, 14:29:57 »
I think it looks really slick! I like the side design; makes it a bit more unique.

Offline Archedemus

  • Posts: 10
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #158 on: Wed, 30 May 2018, 16:51:54 »
This case is ABSOLUTELY AMAZING: DZ60 support, looks, anodizing( I hope), true hhkb, integrated plate ... everything is so good, and it will be about 200$  for the kit!

I would like to see purple ( Tokyo cyberpunk pink*)coating too, but if it won’t happen I will go with the purple color.

I regard this case as an ultimate competitor to Tina. The latter, I suppose is so overpriced. Basically they are sold for 110$ on mechmarket. Damn it. KBDFans have some serious issues with anodizing. I hope your GB will get a perfect finish, don’t save any money on it, as anodizing is what makes ANY case unique.

Offline gr4v3m4n

  • Posts: 95
  • Location: kaps land
[IC] FUSION60 (Final Design & Estimate Price)
« Reply #159 on: Wed, 30 May 2018, 18:58:55 »
This is how the prototype looks like.. we cant make the sides looks as sharp like the 3d render.. what do you guys think? Should I keep it like that or remove the side design?
Show Image
Show Image
Show Image


Sent from my SM-G610F using Tapatalk

Is it just me or the top plate doesn't seem to be flush with the bottom plate? Or is this a known problem that is only in the prototype?
It's not screwed in properly yet.. we haven't receive the screws yet

Sent from my SM-G610F using Tapatalk

Ah cool. That is totally fine then.

Additionally, maybe for the side design, the top-part of the case can have a curve above the side design part, so that it looks seamless and not like a ‘roof’. I’m not sure if I’m describing this clearly.


Sent from my iPhone using Tapatalk
couldn’t agree more, just a little curve on the bottom of the top case would make a perfect look...
ohhh...and two tone would look sooo cool.

Sent from my iPhone using Tapatalk
« Last Edit: Wed, 30 May 2018, 19:01:13 by gr4v3m4n »

Offline Unforgivable

  • Posts: 621
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #160 on: Wed, 30 May 2018, 19:11:11 »
This is how the prototype looks like.. we cant make the sides looks as sharp like the 3d render.. what do you guys think? Should I keep it like that or remove the side design?
Show Image
Show Image
Show Image


Sent from my SM-G610F using Tapatalk

Is it just me or the top plate doesn't seem to be flush with the bottom plate? Or is this a known problem that is only in the prototype?
It's not screwed in properly yet.. we haven't receive the screws yet

Sent from my SM-G610F using Tapatalk

Is it possible to continue the design to affect the top?

The way it looks now kind of kills the look, IMO.

Offline nickaster1

  • Posts: 72
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #161 on: Wed, 30 May 2018, 21:53:02 »
Would like to see the plate sold separately

Offline Archedemus

  • Posts: 10
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #162 on: Thu, 31 May 2018, 01:30:38 »
I don’t see anything bad in the design. I have to admit it looks “simple”, not “aggressive” as it was supposed to be.

Offline 0GBobbyJohnson

  • Posts: 23
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #163 on: Thu, 31 May 2018, 02:04:19 »
Been looking around for a nice 60% case lately. This might just be the one!

Offline Archedemus

  • Posts: 10
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #164 on: Thu, 31 May 2018, 02:06:05 »
Been looking around for a nice 60% case lately. This might just be the one!

This is it. There is no other choice.


Sent from my iPhone using Tapatalk

Offline 0GBobbyJohnson

  • Posts: 23
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #165 on: Thu, 31 May 2018, 02:08:18 »
Been looking around for a nice 60% case lately. This might just be the one!

This is it. There is no other choice.


Sent from my iPhone using Tapatalk

Haha it’ll definitely depend. Getting a new board means no artisans for a while :(. And getting switches + keycaps makes it pretty pricey.

Offline Archedemus

  • Posts: 10
[IC] FUSION60 (Final Design & Estimate Price)
« Reply #166 on: Thu, 31 May 2018, 02:09:36 »
Tina (the same kit) costs 160$ but shipped, and this is a unique.
« Last Edit: Thu, 31 May 2018, 13:17:25 by Archedemus »

Offline Vulcan

  • Thread Starter
  • Posts: 117
  • Location: Indonesia
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #167 on: Thu, 31 May 2018, 20:36:02 »
I think it looks really slick! I like the side design; makes it a bit more unique.

Thanks!

This case is ABSOLUTELY AMAZING: DZ60 support, looks, anodizing( I hope), true hhkb, integrated plate ... everything is so good, and it will be about 200$  for the kit!

I would like to see purple ( Tokyo cyberpunk pink*)coating too, but if it won’t happen I will go with the purple color.

I regard this case as an ultimate competitor to Tina. The latter, I suppose is so overpriced. Basically they are sold for 110$ on mechmarket. Damn it. KBDFans have some serious issues with anodizing. I hope your GB will get a perfect finish, don’t save any money on it, as anodizing is what makes ANY case unique.

Tokyo cyber pink like GMK Laser pink? Yeaa.. I like that color too.. I'll se what i can do. But to make sure im pictureing the same color like you said.. can you give me picture of the color?

Btw. I heard KBDfans is partnering up with a new manufactureing company.. maybe now they have better results.

This is how the prototype looks like.. we cant make the sides looks as sharp like the 3d render.. what do you guys think? Should I keep it like that or remove the side design?
Show Image
Show Image
Show Image


Sent from my SM-G610F using Tapatalk

Is it just me or the top plate doesn't seem to be flush with the bottom plate? Or is this a known problem that is only in the prototype?
It's not screwed in properly yet.. we haven't receive the screws yet

Sent from my SM-G610F using Tapatalk

Ah cool. That is totally fine then.

Additionally, maybe for the side design, the top-part of the case can have a curve above the side design part, so that it looks seamless and not like a ‘roof’. I’m not sure if I’m describing this clearly.


Sent from my iPhone using Tapatalk
couldn’t agree more, just a little curve on the bottom of the top case would make a perfect look...
ohhh...and two tone would look sooo cool.

Sent from my iPhone using Tapatalk

Two toone??? Hmmmm... i have tried it before with render.. it doesnt seams to work well..
This is how the prototype looks like.. we cant make the sides looks as sharp like the 3d render.. what do you guys think? Should I keep it like that or remove the side design?
Show Image
Show Image
Show Image


Sent from my SM-G610F using Tapatalk

Is it just me or the top plate doesn't seem to be flush with the bottom plate? Or is this a known problem that is only in the prototype?
It's not screwed in properly yet.. we haven't receive the screws yet

Sent from my SM-G610F using Tapatalk

Is it possible to continue the design to affect the top?

The way it looks now kind of kills the look, IMO.

Yep, i the top case also is bugging me.. I'll try me best to make this case look like one piece...

Would like to see the plate sold separately

Why would you like to buy the plate seperately?

Offline Archedemus

  • Posts: 10
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #168 on: Sat, 02 June 2018, 15:27:48 »
So the color I suggest : 

Hex: #cc3b7c
RGB: (204, 59, 124)

 OR

HEX: #a1355c
RGB: (161, 53, 92)

Offline Archedemus

  • Posts: 10
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #169 on: Sun, 03 June 2018, 06:43:17 »
What's the estimated GB timeline? Guess, I'll go for Tina-A.

Online dantambok

  • Posts: 130
  • Location: Philippines
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #170 on: Sun, 03 June 2018, 08:35:01 »
What's the estimated GB timeline? Guess, I'll go for Tina-A.

Note that top mount and tray mount feel really different from one another. Tina is tray while the fusion is top mount

Offline Archedemus

  • Posts: 10
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #171 on: Sun, 03 June 2018, 08:37:28 »
What's the estimated GB timeline? Guess, I'll go for Tina-A.

Note that top mount and tray mount feel really different from one another. Tina is tray while the fusion is top mount


I know, still don’t want to wait for half a year

Offline elcubismo

  • Posts: 171
  • Location: San Antonio, TX, USA
    • Reddit page
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #172 on: Sun, 03 June 2018, 21:02:25 »
What's the estimated GB timeline? Guess, I'll go for Tina-A.

Note that top mount and tray mount feel really different from one another. Tina is tray while the fusion is top mount

Anyway you could describe the difference? I've only ever had tray mount and the fact that this is top mount was great to hear.
Leopold FC660C lubed, silenced with landing pads | Norbatouch lubed, silenced with hyperspheres | Poker II MX Blue with vortex aluminum case, vortex red/white doubeshot pbt caps and o-rings | CODE TKL MX Clear with Miami | Unicomp Buckling Spring | GMMK with rainbow vomit switches, mostly jailhouse blues and pandealios

Offline ideus

  • * Exalted Elder
  • Posts: 7107
  • Location: In the middle of nowhere.
  • Truthful writing and politeness do not mix well.
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #173 on: Sun, 03 June 2018, 21:19:52 »
Nice pricing, but you should remove the renders of the true-happy layout that is not covered by the design.

If I just were not waiting for an upcoming sub-sixty model to try out...

Good job.


Offline mikenogo

  • Posts: 39
  • Location: Canada, ON
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #174 on: Mon, 04 June 2018, 10:22:25 »
I know I may be the minority, but would it be possible to add some form of RGB on this board?  :-[

Offline elcubismo

  • Posts: 171
  • Location: San Antonio, TX, USA
    • Reddit page
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #175 on: Mon, 04 June 2018, 14:43:28 »
I know I may be the minority, but would it be possible to add some form of RGB on this board?  :-[

You can always use a different, rgb-compatible pcb
Leopold FC660C lubed, silenced with landing pads | Norbatouch lubed, silenced with hyperspheres | Poker II MX Blue with vortex aluminum case, vortex red/white doubeshot pbt caps and o-rings | CODE TKL MX Clear with Miami | Unicomp Buckling Spring | GMMK with rainbow vomit switches, mostly jailhouse blues and pandealios

Offline tex_live_utility

  • Posts: 119
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #176 on: Mon, 04 June 2018, 18:44:31 »
I know I may be the minority, but would it be possible to add some form of RGB on this board?  :-[

I think the original design had acrylic sections for underglow like on Duck keyboards, but it was removed to keep cost down.

Offline duckboi

  • Posts: 58
  • Location: FL - US
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #177 on: Wed, 06 June 2018, 13:44:23 »
I just want to say that I found this pretty recently and am really looking forward to it!

Also, to clarify, is the prototype you showed in black or in gray?
The m0ar empty you feel,  the m0ar space for Keycaps..

Offline zap2oz

  • Posts: 23
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #178 on: Wed, 06 June 2018, 22:27:53 »
Just wanted to say that I really dig the design of the prototype. Watching the thread now and can't wait for GB to open!

Online feedbaack

  • Posts: 22
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #179 on: Thu, 07 June 2018, 10:22:42 »
Just wanted to say that I really dig the design of the prototype. Watching the thread now and can't wait for GB to open!

Definitely interested too !   :thumb:

Offline Yeoh

  • Posts: 56
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #180 on: Thu, 07 June 2018, 12:37:17 »
Not sure if this has been brought up yet, but is there any chance for a fixed ANSI plate?
« Last Edit: Thu, 07 June 2018, 12:50:03 by Yeoh »

Offline cldskt

  • Posts: 105
  • Location: Rabbithole
  • Wallet and hobby aren't friends
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #181 on: Mon, 11 June 2018, 04:12:19 »
Yo Vulcan,

You might wanna post the video of the prototype you posted on Indonesian MK FB Group here as well. I’m sure all of us would appreciate it :)


"Addiction is buying the things that I don't need with the money I don't have." - me
"Spending $500 on your first custom is justified." - also me

Offline tex_live_utility

  • Posts: 119
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #182 on: Mon, 11 June 2018, 06:43:06 »
This is how the prototype looks like.. we cant make the sides looks as sharp like the 3d render.. what do you guys think? Should I keep it like that or remove the side design?
Show Image
Show Image
Show Image


Sent from my SM-G610F using Tapatalk
This looks great to me. Maybe you should add it to the OP?

Offline cldskt

  • Posts: 105
  • Location: Rabbithole
  • Wallet and hobby aren't friends
[IC] FUSION60 (Final Design & Estimate Price)
« Reply #183 on: Wed, 13 June 2018, 04:18:05 »
Some more teaser photos from OP:

[Deleted as per request by the OP]

My bad!
« Last Edit: Wed, 13 June 2018, 04:26:37 by cldskt »


"Addiction is buying the things that I don't need with the money I don't have." - me
"Spending $500 on your first custom is justified." - also me

Offline Yeoh

  • Posts: 56
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #184 on: Wed, 13 June 2018, 10:56:47 »
Some more teaser photos from OP:

[Deleted as per request by the OP]

My bad!

Hmm, guess im too late, would have liked to have seen them.

Offline SteffeMK

  • Posts: 22
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #185 on: Wed, 13 June 2018, 11:39:01 »
Any updates when the gb will start?

Skickat från min SM-N950F via Tapatalk


Offline Vulcan

  • Thread Starter
  • Posts: 117
  • Location: Indonesia
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #186 on: Wed, 13 June 2018, 15:26:06 »
Hai all!, sorry for he late updates.. I've boon out of town for the past week, here is some more photo of the first prototype, still need to fix a couple things.






 

Offline crusader_alex

  • Posts: 39
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #187 on: Wed, 13 June 2018, 16:41:17 »
Oh wow this looks absolutely phenomenal,im definitely in for the gb!!!

Offline Fatboychard

  • Posts: 2
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #188 on: Wed, 13 June 2018, 19:12:03 »
The prototype looks great!

Offline gr4v3m4n

  • Posts: 95
  • Location: kaps land
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #189 on: Wed, 13 June 2018, 19:34:54 »
Hai all!, sorry for he late updates.. I've boon out of town for the past week, here is some more photo of the first prototype, still need to fix a couple things.


Show Image

Show Image

Show Image

damnn...i still dig that two tone look eventhough its just the light efect...:D


Sent from my iPhone using Tapatalk

Offline Vulcan

  • Thread Starter
  • Posts: 117
  • Location: Indonesia
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #190 on: Thu, 14 June 2018, 06:34:46 »
Any updates when the gb will start?

Skickat från min SM-N950F via Tapatalk
Since there is alot of request on changing the shape of the top case to match the side of the bottom case.. I think the GB will start on late august..

Sent from my SM-G610F using Tapatalk


Offline elcubismo

  • Posts: 171
  • Location: San Antonio, TX, USA
    • Reddit page
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #191 on: Thu, 14 June 2018, 10:23:52 »
aw that's so far away :(

still, this looks amazing and will be worth it!
Leopold FC660C lubed, silenced with landing pads | Norbatouch lubed, silenced with hyperspheres | Poker II MX Blue with vortex aluminum case, vortex red/white doubeshot pbt caps and o-rings | CODE TKL MX Clear with Miami | Unicomp Buckling Spring | GMMK with rainbow vomit switches, mostly jailhouse blues and pandealios

Offline Vulcan

  • Thread Starter
  • Posts: 117
  • Location: Indonesia
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #192 on: Thu, 14 June 2018, 10:29:22 »
aw that's so far away :(

still, this looks amazing and will be worth it!
Do you think i should run round 1 with this current design? :D

Sent from my SM-G610F using Tapatalk


Offline SteffeMK

  • Posts: 22
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #193 on: Thu, 14 June 2018, 10:32:43 »
I like it, so I think you should!

Skickat från min SM-N950F via Tapatalk


Offline mikenogo

  • Posts: 39
  • Location: Canada, ON
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #194 on: Thu, 14 June 2018, 12:13:48 »
aw that's so far away :(

still, this looks amazing and will be worth it!
Do you think i should run round 1 with this current design? :D

Sent from my SM-G610F using Tapatalk

No, take your time, time gives you chance to perfect the shape and quality.

Additionally, it gives us to save some money for it as well. There are gonna be few big drops coming in next few weeks.


Offline Yeoh

  • Posts: 56
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #195 on: Thu, 14 June 2018, 12:14:17 »

Do you think i should run round 1 with this current design? :D

Sent from my SM-G610F using Tapatalk

I have no problem waiting until you reach a design you are fully confident in.

Would also appreciate time to save up, as there have been alot of amazing gb's already this year.

Good things are worth the wait.
« Last Edit: Thu, 14 June 2018, 12:16:00 by Yeoh »

Offline cldskt

  • Posts: 105
  • Location: Rabbithole
  • Wallet and hobby aren't friends
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #196 on: Thu, 14 June 2018, 12:34:10 »
aw that's so far away :(

still, this looks amazing and will be worth it!
Do you think i should run round 1 with this current design? :D

Sent from my SM-G610F using Tapatalk

As the others have said, I would say no to running the GB now. Perfect your case to what you envisioned it to be, as "R2" is only plausible when you have a successful "R1".

Delay is never good, but delays are easily forgotten with a good product.


"Addiction is buying the things that I don't need with the money I don't have." - me
"Spending $500 on your first custom is justified." - also me

Offline mr scooty

  • Posts: 93
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #197 on: Thu, 14 June 2018, 12:54:35 »
+1 for taking the time to perfect the case  :thumb:

Offline elcubismo

  • Posts: 171
  • Location: San Antonio, TX, USA
    • Reddit page
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #198 on: Thu, 14 June 2018, 13:39:52 »
Honestly it's probably worth the wait to get things right, though I'm pretty sure I'd join in on R1 if you did it at the current price.
Leopold FC660C lubed, silenced with landing pads | Norbatouch lubed, silenced with hyperspheres | Poker II MX Blue with vortex aluminum case, vortex red/white doubeshot pbt caps and o-rings | CODE TKL MX Clear with Miami | Unicomp Buckling Spring | GMMK with rainbow vomit switches, mostly jailhouse blues and pandealios

Offline Vulcan

  • Thread Starter
  • Posts: 117
  • Location: Indonesia
Re: [IC] FUSION60 (Final Design & Estimate Price)
« Reply #199 on: Thu, 14 June 2018, 22:38:17 »
Ok, I will post some alternative design to match the bottom case and make polls.. I will need you guys to choose which is the best :)

Sent from my SM-G610F using Tapatalk